libudev will sometimes falsely identify an 'atari' partition on a
blank disk, preventing it from being used in an autoreplace. This
seems to be a known issue. The workaround is to just ignore the
fake partition and continue with the autoreplace.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#13497Closes#13632
Get rid of RPM warnings on AlmaLinux 9:
"It's not recommended to have unversioned Obsoletes"
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#13584Closes#13638
Specify the lua and zstd license text in the manor in which the
kernel MODULE_LICENSE macro requires it. The now duplicate entries
were merged and a comment added to make it clear what they apply to.
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13641
Fixes a small kernel memory leak which would occur if a pool failed
to import because the `DMU_POOL_VDEV_ZAP_MAP` key can't be read from
a presumably damaged MOS config. In the case of a missing key there
was no leak.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Finix1979 <yancw@info2soft.com>
Closes#13629
Before this change for every valid parity column raidz_parity_verify()
allocated new buffer and copied there existing data, then recalculated
the parity and compared the result with the copy. This patch removes
the memory copy, simply swapping original buffer pointers with newly
allocated empty ones for parity recalculation and comparison. Original
buffers with potentially incorrect parity data are then just freed,
while new recalculated ones are used for repair.
On a pool of 12 4-wide raidz vdevs, storing 1.5TB of 16MB blocks, this
change reduces memory traffic during scrub by 17% and total unhalted
CPU time by 25%.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13613
Issuing several scrub reads for a block we may use the parent ZIO
buffer for one of child ZIOs. If that read complete successfully,
then we won't need to copy the data explicitly. If block has only
one copy (typical for root vdev, which is also a mirror inside),
then we never need to copy -- succeed or fail as-is. Previous
code also copied data from buffer of every successfully completed
child ZIO, but that just does not make any sense.
On healthy N-wide mirror this saves all N+1 (or even more in case
of ditto blocks) memory copies for each scrubbed block, allowing
CPU to focus mostly on check-summing. For other vdev types it
should save one memory copy per block copy at root vdev.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13606
Follow up fix for a926aab902.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13348Closes#13610
Simply prevent overwriting root until it needs to be overwritten.
Dracut could change this value before this module is called, but won't
change the kernel command line.
Reviewed-by: Andrew J. Hesford <ajh@sideband.org>
Signed-off-by: Toyam Cox <vaelatern@voidlinux.org>
Closes#13592
Change zfs-snapshot-bootfs.service to zfs-rollback-bootfs.service in
cmdline point 4 of README.md.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com>
Closes#13609
If a dnode has a spill pointer, and we use DN_SLOTS_TO_BONUSLEN() then
we will possibly include the spill pointer in the len calculation and it
will be byteswapped. Then dnode_byteswap() will carry on and swap the
spill pointer again. Fix this by using DN_MAX_BONUS_LEN() instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#13002Closes#13015
Due to a missing semicolon on the ExecStart line, it wasn't possible
to specify the snapshot name on the bootfs.{rollback,snapshot}
kernel parameters if the boot dataset name was obtained from the
root=zfs:... kernel parameter.
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com>
Closes#13585
Format the `zpool get` command correctly. The -o option must
be followed by "all" or the requested field name.
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13602
Zp->z_mode is set at the same time inode->i_mode
is being changed. This has the effect of keeping both
in sync without relying on zfs_znode_update_vfs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: yanping.gao <yanping.gao@xtaotech.com>
Closes#13581
If NEED_SOLARIS_BOOLEAN is defined we define an enum boolean_t, which
defines B_TRUE/B_FALSE as well. If we have both the define and the enum
things don't build (because that translates to
'enum { 0, 1 } boolean_t').
While here also remove an incorrect '#else'. With it in place we only
parse a section if the include guard is triggered. So we'd only use that
code if this file is included twice. This is clearly unintended, and
also means we don't get the 'boolean_t' definition. Fix this.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Kristof Provost <kprovost@netgate.com>
Sponsored-By: Rubicon Communications, LLC ("Netgate")
Closes#13596
Block statistics calculation during scrub I/O issue in case of sorted
scrub accounted ditto blocks several times. Embedded blocks on other
side were not accounted at all. This change moves the accounting from
issue to scan stage, that fixes both problems and also allows to avoid
pool-wide locking and the lock contention it created.
Since this statistics is quite specific and is not even exposed now
anywhere, disable its calculation by default to not waste CPU time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13579
Resolve straight-line speculation warnings reported by objtool
for x86_64 assembly on Linux when CONFIG_SLS is set. See the
following LWN article for the complete details.
https://lwn.net/Articles/877845/
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
Switch to using asprintf() to satisfy the compiler and resolve the
potential format-overflow warning. Not the conditional before the
sprintf() would have prevented this regardless.
cmd/zfs/zfs_project.c: In function ‘zfs_project_handle_dir’:
cmd/zfs/zfs_project.c:241:38: error: ‘/’ directive writing
1 byte into a region of size between 0 and 4352
[-Werror=format-overflow=]
cmd/zfs/zfs_project.c:241:17: note: ‘sprintf’ output between
2 and 4609 bytes into a destination of size 4352
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
Extend the buffer slightly resolve the warning.
cmd/zfs/zfs_main.c: In function ‘upgrade_set_callback’:
cmd/zfs/zfs_main.c:2446:22: error: ‘%llu’ directive output
may be truncated writing between 1 and 20 bytes into a
region of size 16 [-Werror=format-truncation=]
cmd/zfs/zfs_main.c:2445:24: note: ‘snprintf’ output between
2 and 21 bytes into a destination of size 16
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
Move the use of the db pointer after it is freed. It's only used as
a tag so a dereference would never occur, but there's no reason we
can't invert the order to resolve the warning.
module/zfs/dbuf.c: In function 'dbuf_destroy':
module/zfs/dbuf.c:2953:17: error:
pointer 'db' may be used after 'free' [-Werror=use-after-free]
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
Move the use of the private pointer after it is freed. It's only
used as a tag so a dereference would never occur, but there's no
harm in inverting the order to resolve the warning.
module/zfs/dbuf.c: In function 'dbuf_issue_final_prefetch_done':
module/zfs/dbuf.c:3204:17: error:
pointer 'private' may be used after 'free' [-Werror=use-after-free]
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
The memcpy(), memmove(), and memset() functions have been annotated
to perform bounds checking when using FORTIFY_SOURCE. A warning is
now generted when writing beyond the end of the specified field.
Alternately, the new struct_group() macro could be used to create
an anonymous union member for use by memcpy(). However, since this
is the only place the macro would be helpful it's preferable to
restructure the code slights to avoid the need for additional
compatibility code when the macro does not exist.
https://lore.kernel.org/lkml/20211118183807.1283332-1-keescook@chromium.org/T/
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
The wrong union memory was being accessed in EdonRInit resulting in
a write beyond size of field compiler warning. Reference the correct
member to resolve the warning. The warning was correct and this in
case the mistake was harmless.
In function ‘fortify_memcpy_chk’,
inlined from ‘EdonRInit’ at zfs/module/icp/algs/edonr/edonr.c:494:3:
./include/linux/fortify-string.h:344:25: error: call to
‘__write_overflow_field’ declared with attribute warning:
detected write beyond size of field (1st parameter);
maybe use struct_group()? [-Werror=attribute-warning]
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
Restructure the code in zfs_log_xvattr() to use a lr_attr_end
structure when accessing lr_attr_t elements located after the
variable sized array. This makes the code more understandable
and resolves the accessing beyond the end of the field warnings.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
This code should be kept inline with the upstream lua version as much
as possible. Therefore, we simply want to silence the warning. This
check was enabled by default as part of -Wall in gcc 12.1.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13528Closes#13575
The current codebase does not support raw sending buffers with block
size > 128kB when large_blocks is not active. This can happen in the
codepath dsl_dataset_sync()->dmu_objset_sync()->zio_nowait() which
calls back dmu_objset_write_done()->dsl_dataset_block_born(). If
dsl_dataset_sync() completes its run before dsl_dataset_block_born() is
called, we will end up not activating some of the necessary flags, while
having blocks based on those flags written in the filesystem. A
subsequent send will then panic.
Fix this by directly deciding in dmu_objset_sync() whether these flags
need to be activated later by dsl_dataset_sync(). Instead of panicking
due to a NULL pointer dereference in dmu_dump_write() in case of a send,
print out an error message. Also during scrub verify there are no
contradicting filesystem flags.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#12275Closes#12438
Change math to make it like the ARC, using multiplications instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13591
- Introduce first element offset within a leaf. It allows to reduce
by ~50% average memmove() size when adding/removing elements. If the
added/removed element is in the first half of the leaf, we may shift
elements before it and adjust the bth_first instead of moving more
elements after it.
- Use memcpy() instead of memmove() when we know there is no overlap.
- Switch from uint64_t to uint32_t. It does not limit anything,
but 32-bit arches should appreciate it greatly in hot paths.
- Store leaf capacity in struct btree to avoid 64-bit divisions.
- Adjust zfs_btree_insert_into_leaf() to always result in balanced
leaves after splitting, no matter where the new element was inserted.
Not that we care about it much, but it should also allow B-trees with
as little as two elements per leaf instead of 4 previously.
When scrubbing pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks this
reduces amount of time spent in memmove() inside the scan thread from
13.7% to 5.7% and total scrub time by ~15 seconds out of 9 minutes.
It should also reduce spacemaps load time, but I haven't measured it.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13582
It can be used to repair a ZFS file system corrupted by ZFS bug #12762.
Use it like this:
zfs send -c <DS> | \
zstream decompress <OBJECT>,<OFFSET>[,<COMPRESSION_ALGO>] ... | \
zfs recv <DST_DS>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored-by: Axcient
Workaround for #12762Closes#13256
- Reduce size and comparison complexity of q_exts_by_size B-tree.
Previous code used two 64-bit divisions and many other operations to
compare two B-tree elements. It created enormous overhead. This
implementation moves the math to the upper level and stores the score
in the B-tree elements themselves. Since all that we need to store in
that B-tree is the extent score and offset, those can fit into single
8 byte value instead of 24 bytes of q_exts_by_addr element and can be
compared with single operation.
- Better decouple secondary tree logic from main range_tree by moving
rt_btree_ops and related functions into dsl_scan.c as ext_size_ops.
Those functions are very small to worry about the code duplication and
range_tree does not need to know details such as rt_btree_compare.
- Instead of accounting number of pending bytes per pool, that needs
atomic on global variable per block, account the number of non-empty
per-vdev queues, that change much more rarely.
- When extent scan is interrupted by TXG end, continue it in the next
TXG instead of selecting next best extent. It allows to avoid leaving
one truncated (and so likely not the best any more) extent each TXG.
On top of some other optimizations this saves about 1.5 minutes out of
10 to scrub pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <caputit1@tcnj.edu>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13576
Use Dq,Pq/Po/Pc macros. illumos dumpadm is now in section 8.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#13586
When scrubbing a raidz/draid pool, which contains a replacing or
sparing mirror with multiple online children, only one child will
be read. This is not normally a serious concern because the DTL
records are used to determine where a good copy of the data is.
As long as the data can be read from one child the mirror vdev
will use it to repair gaps in any of its children. Furthermore,
even if the data which was read is corrupt the raidz code will
detect this and issue its own repair I/O to correct the damage
in the mirror vdev.
However, in the scenario where the DTL is wrong due to silent
data corruption (say due to overwriting one child) and the scrub
happens to read from a child with good data, then the other damaged
mirror child will not be detected nor repaired.
While this is possible for both raidz and draid vdevs, it's most
pronounced when using draid. This is because by default the zed
will sequentially rebuild a draid pool to a distributed spare,
and the distributed spare half of the mirror is always preferred
since it delivers better performance. This means the damaged
half of the mirror will go undetected even after scrubbing.
For system administrations this behavior is non-intuitive and in
a worst case scenario could result in the only good copy of the
data being unknowingly detached from the mirror.
This change resolves the issue by reading all replacing/sparing
mirror children when scrubbing. When the BP isn't available for
verification, then compare the data buffers from each child. They
must all be identical, if not there's silent damage and an error
is returned to prompt the top-level vdev to issue a repair I/O to
rewrite the data on all of the mirror children. Since we can't
tell which child was wrong a checksum error is logged against the
replacing or sparing mirror vdev.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13555
The kmem_alloc(sizeof (*ctx), KM_NOSLEEP) call on FreeBSD can't be
used in this code segment. Work around this by pre-allocating a percpu
context array for later use.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#13568
The zfs-load-module.service service is not currently provided by
the OpenZFS repository so we cannot safely assume it exists.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Thode <mthode@mthode.org>
Closes#13574
Handle crypto_dispatch() return values same as crp->crp_etype errors.
On FreeBSD 12 many drivers returned same errors both ways, and lack
of proper handling for the first ended up in assertion panic later.
It was changed in FreeBSD 13, but there is no reason to not be safe.
While there, skip waiting for completion, including locking and
wakeup() call, for sessions on synchronous crypto drivers, such as
typical aesni and software.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13563
Increase nlinks in stat results of ./zfs/snapshot based on snapshot
count. This provides quick and efficient method for administrators to
get snapshot counts without having to use libzfs or list the snapdir
contents.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Andrew Walker <awalker@ixsystems.com>
Closes#13559
zfs_send_cb_impl fails to report error for some flags.
Use second error variable for send_conclusion_record.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#13558
During sorted scrub multiple threads (one per vdev) are issuing many
ZIOs same time, all using the same scn->scn_zio_root ZIO as parent.
It causes huge lock contention on the single global lock on that ZIO.
Improve it by introducing per-queue null ZIOs, children to that one,
and using them instead as proxy.
For 12 SSD pool storing 1.5TB of 4KB blocks on 80-core system this
dramatically reduces lock contention and reduces scrub time from 21
minutes down to 12.5, while actual read stages (not scan) are about
3x faster, reaching 100K blocks per second per vdev.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13553
When building modules (as well as the kernel) with ARCH=um, the options
-Dsetjmp=kernel_setjmp and -Dlongjmp=kernel_longjmp are passed to the C
preprocessor for C files. This causes the setjmp and longjmp used in
module/lua/ldo.c to be kernel_setjmp and kernel_longjmp respectively in
the object file. However, the setjmp and longjmp that is intended to be
called is defined in an architecture dependent assembly file under the
directory module/lua/setjmp. Since it is an assembly and not a C file,
the preprocessor define is not given and the names do not change. This
becomes an issue when modpost is trying to create the Module.symvers
and sees no defined symbol for kernel_setjmp and kernel_longjmp. To fix
this, if the macro CONFIG_UML is defined, then setjmp and longjmp
macros are undefined.
When building with ARCH=um for x86 sub-architectures, CONFIG_X86 is not
defined. Instead, CONFIG_UML_X86 is defined. Despite this, the UML x86
sub-architecture can use the same object files as the x86 architectures
because the x86 sub-architecture UML kernel is running with the same
instruction set as CONFIG_X86. So the modules/Kbuild build file is
updated to add the same object files that CONFIG_X86 would add when
CONFIG_UML_X86 is defined.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Closes#13547
```
os/linux/zfs/zvol_os.c:1111:3: error: ignoring return value of function
declared with 'warn_unused_result' attribute [-Werror,-Wunused-result]
add_disk(zv->zv_zso->zvo_disk);
^~~~~~~~ ~~~~~~~~~~~~~~~~~~~~
zpl_xattr.c:1579:1: warning: no previous prototype for function
'zpl_posix_acl_release_impl' [-Wmissing-prototypes]
```
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes#13551
This fd has nothing to do with cleanup, that's just the name of the
field in zfs_cmd_t that was used to pass it to the kernel.
Call it what it is, an fd for a user namespace.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes#13554
zfs_userns opens a file descriptor for the kernel to look up a
namespace, but does not close it.
Close the fd when we're done with it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org>
Closes#13554
On machines using systemd, trim timers can be enabled on a per-pool
basis. Weekly and monthly timer units are provided. Timers can be
enabled as follows:
systemctl enable zfs-trim-weekly@rpool.timer --now
systemctl enable zfs-trim-monthly@datapool.timer --now
Each timer will pull in zfs-trim@${poolname}.service, which is not
schedule-specific.
The manpage zpool-trim has been updated accordingly.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Julian Brunner <julian.brunner@gmail.com>
Closes#13544
Since we use two B-trees q_exts_by_size and q_exts_by_addr, we should
count 2x sizeof (range_seg_gap_t) per node. And since average B-tree
memory efficiency is about 75%, we should increase it to 3x.
Previous code under-counted up to 30% of the memory usage.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes#13537
Tino Reichardt
Tony Hutter
Brian Behlendorf
Finix1979
Alexander Motin
наб
Toyam Cox
gregory-lee-bartholomew
George Amanakis
gaoyanping
Kristof Provost
Alan Somers
Toomas Soome
Matthew Thode
Andrew
ixhamza
crass
Damian Szuberski
Allan Jude
Ryan Moeller
Julian Brunner