Commit Graph

1471 Commits

Author SHA1 Message Date
Matthew Ahrens 3a549dc7a1 OpenZFS 9442 - decrease indirect block size of spacemaps
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Albert Lee <trisk@forkgnu.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: George Melikov <mail@gmelikov.ru>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Updates to indirect blocks of spacemaps can contribute significantly to
write inflation.  Therefore we want to reduce the indirect block size of
spacemaps from 128K to 16K.

Porting notes:
* Refactored to allow the dmu_object_alloc(), dmu_object_alloc_ibs()
  and dmu_object_alloc_dnsize() functions to use a common shared
  dmu_object_alloc_impl() function.

OpenZFS-issue: https://www.illumos.org/issues/9442
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0c2e6408b
Closes #7712
2018-07-25 14:11:35 -07:00
Feng Sun 750e1f88d3 Introduce kstat dmu_tx_dirty_frees_delay
It is helpful to tune zfs_per_txg_dirty_frees_percent for commit
539d33c7(OpenZFS 6569 - large file delete can starve out write ops).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Feng Sun <loyou85@gmail.com>
Closes #7718
2018-07-25 09:52:27 -07:00
Brian Behlendorf d441e85dd7
Add support for autoexpand property
While the autoexpand property may seem like a small feature it
depends on a significant amount of system infrastructure.  Enough
of that infrastructure is now in place that with a few modifications
for Linux it can be supported.

Auto-expand works as follows; when a block device is modified
(re-sized, closed after being open r/w, etc) a change uevent is
generated for udev.  The ZED, which is monitoring udev events,
passes the change event along to zfs_deliver_dle() if the disk
or partition contains a zfs_member as identified by blkid.

From here the device is matched against all imported pool vdevs
using the vdev_guid which was read from the label by blkid.  If
a match is found the ZED reopens the pool vdev.  This re-opening
is important because it allows the vdev to be briefly closed so
the disk partition table can be re-read.  Otherwise, it wouldn't
be possible to report the maximum possible expansion size.

Finally, if the property autoexpand=on a vdev expansion will be
attempted.  After performing some sanity checks on the disk to
verify that it is safe to expand,  the primary partition (-part1)
will be expanded and the partition table updated.  The partition
is then re-opened (again) to detect the updated size which allows
the new capacity to be used.

In order to make all of the above possible the following changes
were required:

* Updated the zpool_expand_001_pos and zpool_expand_003_pos tests.
  These tests now create a pool which is layered on a loopback,
  scsi_debug, and file vdev.  This allows for testing of non-
  partitioned block device (loopback), a partition block device
  (scsi_debug), and a file which does not receive udev change
  events.  This provided for better test coverage, and by removing
  the layering on ZFS volumes there issues surrounding layering
  one pool on another are avoided.

* zpool_find_vdev_by_physpath() updated to accept a vdev guid.
  This allows for matching by guid rather than path which is a
  more reliable way for the ZED to reference a vdev.

* Fixed zfs_zevent_wait() signal handling which could result
  in the ZED spinning when a signal was not handled.

* Removed vdev_disk_rrpart() functionality which can be abandoned
  in favor of kernel provided blkdev_reread_part() function.

* Added a rwlock which is held as a writer while a disk is being
  reopened.  This is important to prevent errors from occurring
  for any configuration related IOs which bypass the SCL_ZIO lock.
  The zpool_reopen_007_pos.ksh test case was added to verify IO
  error are never observed when reopening.  This is not expected
  to impact IO performance.

Additional fixes which aren't critical but were discovered and
resolved in the course of developing this functionality.

* Added PHYS_PATH="/dev/zvol/dataset" to the vdev configuration for
  ZFS volumes.  This is as good as a unique physical path, while the
  volumes are not used in the test cases anymore for other reasons
  this improvement was included.

Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #120
Closes #2437
Closes #5771
Closes #7366
Closes #7582
Closes #7629
2018-07-23 15:40:15 -07:00
Matthew Ahrens 2e5dc449c1 OpenZFS 9337 - zfs get all is slow due to uncached metadata
This project's goal is to make read-heavy channel programs and zfs(1m)
administrative commands faster by caching all the metadata that they will
need in the dbuf layer. This will prevent the data from being evicted, so
that any future call to i.e. zfs get all won't have to go to disk (very
much). There are two parts:

The dbuf_metadata_cache. We identify what to put into the cache based on
the object type of each dbuf.  Caching objset properties os
{version,normalization,utf8only,casesensitivity} in the objset_t. The reason
these needed to be cached is that although they are queried frequently,
they aren't stored in a dbuf type which we can easily recognize and cache in
the dbuf layer; instead, we have to explicitly store them. There's already
existing infrastructure for maintaining cached properties in the objset
setup code, so I simply used that.

Performance Testing:

 - Disabled kmem_flags
 - Tuned dbuf_cache_max_bytes very low (128K)
 - Tuned zfs_arc_max very low (64M)

Created test pool with 400 filesystems, and 100 snapshots per filesystem.
Later on in testing, added 600 more filesystems (with no snapshots) to make
sure scaling didn't look different between snapshots and filesystems.

Results:

    | Test                   | Time (trunk / diff) | I/Os (trunk / diff) |
    +------------------------+---------------------+---------------------+
    | zpool import           |     0:05 / 0:06     |    12.9k / 12.9k    |
    | zfs get all (uncached) |     1:36 / 0:53     |    16.7k / 5.7k     |
    | zfs get all (cached)   |     1:36 / 0:51     |    16.0k / 6.0k     |

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>

OpenZFS-issue: https://illumos.org/issues/9337
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7dec52f
Closes #7668
2018-07-12 10:49:27 -07:00
Brian Behlendorf ac09630d8b
Fix zpl_mount() deadlock
Commit 93b43af10 inadvertently introduced the following scenario which
can result in a deadlock.  This issue was most easily reproduced by
LXD containers using a ZFS storage backend but should be reproducible
under any workload which is frequently mounting and unmounting.

-- THREAD A --
spa_sync()
  spa_sync_upgrades()
    rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG); <- Waiting on B

-- THREAD B --
mount_fs()
  zpl_mount()
    zpl_mount_impl()
      dmu_objset_hold()
        dmu_objset_hold_flags()
          dsl_pool_hold()
            dsl_pool_config_enter()
              rrw_enter(&dp->dp_config_rwlock, RW_READER, tag);
    sget()
      sget_userns()
        grab_super()
          down_write(&s->s_umount); <- Waiting on C

-- THREAD C --
cleanup_mnt()
  deactivate_super()
    down_write(&s->s_umount);
    deactivate_locked_super()
      zpl_kill_sb()
        kill_anon_super()
          generic_shutdown_super()
            sync_filesystem()
              zpl_sync_fs()
                zfs_sync()
                  zil_commit()
                    txg_wait_synced() <- Waiting on A

Reviewed by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7598 
Closes #7659 
Closes #7691 
Closes #7693
2018-07-11 15:49:10 -07:00
Brian Behlendorf 33a19e0fd9
Fix kernel unaligned access on sparc64
Update the SA_COPY_DATA macro to check if architecture supports
efficient unaligned memory accesses at compile time.  Otherwise
fallback to using the sa_copy_data() function.

The kernel provided CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is
used to determine availability in kernel space.  In user space
the x86_64, x86, powerpc, and sometimes arm architectures will
define the HAVE_EFFICIENT_UNALIGNED_ACCESS macro.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7642 
Closes #7684
2018-07-11 13:10:40 -07:00
Serapheim Dimitropoulos a7ed98d8b5 OpenZFS 9330 - stack overflow when creating a deeply nested dataset
Datasets that are deeply nested (~100 levels) are impractical. We just
put a limit of 50 levels to newly created datasets. Existing datasets
should work without a problem.

The problem can be seen by attempting to create a dataset using the -p
option with many levels:

    panic[cpu0]/thread=ffffff01cd282c20: BAD TRAP: type=8 (#df Double fault) rp=ffffffff

    fffffffffbc3aa60 unix:die+100 ()
    fffffffffbc3ab70 unix:trap+157d ()
    ffffff00083d7020 unix:_patch_xrstorq_rbx+196 ()
    ffffff00083d7050 zfs:dbuf_rele+2e ()
    ...
    ffffff00083d7080 zfs:dsl_dir_close+32 ()
    ffffff00083d70b0 zfs:dsl_dir_evict+30 ()
    ffffff00083d70d0 zfs:dbuf_evict_user+4a ()
    ffffff00083d7100 zfs:dbuf_rele_and_unlock+87 ()
    ffffff00083d7130 zfs:dbuf_rele+2e ()
    ... The block above repeats once per directory in the ...
    ... create -p command, working towards the root ...
    ffffff00083db9f0 zfs:dsl_dataset_drop_ref+19 ()
    ffffff00083dba20 zfs:dsl_dataset_rele+42 ()
    ffffff00083dba70 zfs:dmu_objset_prefetch+e4 ()
    ffffff00083dbaa0 zfs:findfunc+23 ()
    ffffff00083dbb80 zfs:dmu_objset_find_spa+38c ()
    ffffff00083dbbc0 zfs:dmu_objset_find+40 ()
    ffffff00083dbc20 zfs:zfs_ioc_snapshot_list_next+4b ()
    ffffff00083dbcc0 zfs:zfsdev_ioctl+347 ()
    ffffff00083dbd00 genunix:cdev_ioctl+45 ()
    ffffff00083dbd40 specfs:spec_ioctl+5a ()
    ffffff00083dbdc0 genunix:fop_ioctl+7b ()
    ffffff00083dbec0 genunix:ioctl+18e ()
    ffffff00083dbf10 unix:brand_sys_sysenter+1c9 ()

Porting notes:
* Added zfs_max_dataset_nesting module option with documentation.
* Updated zfs_rename_014_neg.ksh for Linux.
* Increase the zfs.sh stack warning to 15K.  Enough time has passed
  that 16K can be reasonably assumed to be the default value.  It
  was increased in the 3.15 kernel released in June of 2014.

Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>

OpenZFS-issue: https://www.illumos.org/issues/9330
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/757a75a
Closes #7681
2018-07-09 13:02:50 -07:00
Serapheim Dimitropoulos 4d044c4c1d OpenZFS 9238 - ZFS Spacemap Encoding V2
Motivation
==========

The current space map encoding has the following disadvantages:
[1] Assuming 512 sector size each entry can represent at most 16MB for a segment.
    This makes the encoding very inefficient for large regions of space.
[2] As vdev-wide space maps have started to be used by new features (i.e.
    device removal, zpool checkpoint) we've started imposing limits in the
    vdevs that can be used with them based on the maximum addressable offset
    (currently 64PB for a top-level vdev).

New encoding
============

The layout can be found at space_map.h and it remains backwards compatible with
the old one. The introduced two-word entry format, besides extending the limits
imposed by the single-entry layout, also includes a vdev field and some extra
padding after its prefix.

The extra padding after the prefix should is reserved for future usage (e.g.
new prefixes for future encodings or new fields for flags). The new vdev field
not only makes the space maps more self-descriptive, but also opens the doors
for pool-wide space maps (expected to be used in the log spacemap project).

One final important note is that the number of bits used for vdevs is reduced
to 24 bits for blkptrs. That was decided as we don't know of any setups that
use more than 16M vdevs for the time being and we wanted to fit the vdev field
in the space map. In addition that gives us some extra bits in dva_t.

Other references:
=================

The new encoding is also discussed towards the end of the Log Space Map
presentation from 2017's OpenZFS summit.
Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ

Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d
OpenZFS-issue: https://www.illumos.org/issues/9238
Closes #7665
2018-07-05 12:02:34 -07:00
Chunwei Chen edf60b8645 Enforce PROP_ONETIME on zpool properties
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #7661
2018-06-28 14:49:17 -07:00
Serapheim Dimitropoulos d2734cce68 OpenZFS 9166 - zfs storage pool checkpoint
Details about the motivation of this feature and its usage can
be found in this blogpost:

    https://sdimitro.github.io/post/zpool-checkpoint/

A lightning talk of this feature can be found here:
https://www.youtube.com/watch?v=fPQA8K40jAM

Implementation details can be found in big block comment of
spa_checkpoint.c

Side-changes that are relevant to this commit but not explained
elsewhere:

* renames members of "struct metaslab trees to be shorter without
  losing meaning

* space_map_{alloc,truncate}() accept a block size as a
  parameter. The reason is that in the current state all space
  maps that we allocate through the DMU use a global tunable
  (space_map_blksz) which defauls to 4KB. This is ok for metaslab
  space maps in terms of bandwirdth since they are scattered all
  over the disk. But for other space maps this default is probably
  not what we want. Examples are device removal's vdev_obsolete_sm
  or vdev_chedkpoint_sm from this review. Both of these have a
  1:1 relationship with each vdev and could benefit from a bigger
  block size.

Porting notes:

* The part of dsl_scan_sync() which handles async destroys has
  been moved into the new dsl_process_async_destroys() function.

* Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write
  to block device backed pools.

* ZTS:
  * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg".

  * Don't use large dd block sizes on /dev/urandom under Linux in
    checkpoint_capacity.

  * Adopt Delphix-OS's setting of 4 (spa_asize_inflation =
    SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed
    its attempts to fill the pool

  * Create the base and nested pools with sync=disabled to speed up
    the "setup" phase.

  * Clear labels in test pool between checkpoint tests to avoid
    duplicate pool issues.

  * The import_rewind_device_replaced test has been marked as "known
    to fail" for the reasons listed in its DISCLAIMER.

  * New module parameters:

      zfs_spa_discard_memory_limit,
      zfs_remove_max_bytes_pause (not documented - debugging only)
      vdev_max_ms_count (formerly metaslabs_per_vdev)
      vdev_min_ms_count

Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9166
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8
Closes #7570
2018-06-26 10:07:42 -07:00
Brian Behlendorf 1c38ac61e1
Linux 4.14 compat: blk_queue_stackable()
The blk_queue_stackable() function was replaced in the 4.14 kernel
by queue_is_rq_based(), commit torvalds/linux@5fdee212.  This change
resulted in the default elevator being used which can negatively
impact performance.

Rather than adding additional compatibility code to detect the
new interface unconditionally attempt to set the elevator.  Since
we expect this to fail for block devices without an elevator the
error message has been moved in to zfs_dbgmsg().

Finally, it was observed that the elevator_change() was removed
from the 4.12 kernel, commit torvalds/linux@c033269.  Update the
comment to clearly specify which are expected to export the
elevator_change() symbol.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7645
2018-06-19 21:52:45 -07:00
Brian Behlendorf 6413c95fbd
Linux 4.18 compat: inode timespec -> timespec64
Commit torvalds/linux@95582b0 changes the inode i_atime, i_mtime,
and i_ctime members form timespec's to timespec64's to make them
2038 safe.  As part of this change the current_time() function was
also updated to return the timespec64 type.

Resolve this issue by introducing a new inode_timespec_t type which
is defined to match the timespec type used by the inode.  It should
be used when working with inode timestamps to ensure matching types.

The timestruc_t type under Illumos was used in a similar fashion but
was specified to always be a timespec_t.  Rather than incorrectly
define this type all timespec_t types have been replaced by the new
inode_timespec_t type.

Finally, the kernel and user space 'sys/time.h' headers were aligned
with each other.  They define as appropriate for the context several
constants as macros and include static inline implementation of
gethrestime(), gethrestime_sec(), and gethrtime().

Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7643
2018-06-19 21:51:18 -07:00
Tom Caputi cd32e5db8b Add ASSERT to debug encryption key mapping issues
This patch simply adds an ASSERT that confirms that the last
decrypting reference on a dataset waits until the dataset is
no longer dirty. This should help to debug issues where the
ZIO layer cannot find encryption keys after a dataset has been
disowned.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7637
2018-06-18 14:10:54 -07:00
John Gallagher 917f475fba Add tunables for channel programs
This patch adds tunables for modifying the maximum memory limit and
maximum instruction limit that can be specified when running a channel
program.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: John Gallagher <john.gallagher@delphix.com>
External-issue: LX-1085
Closes #7618
2018-06-15 15:10:42 -07:00
Brian Behlendorf 7b98f0d91f
Linux compat 4.18: check_disk_size_change()
Added support for the bops->check_events() interface which was
added in the 2.6.38 kernel to replace bops->media_changed().
Fully implementing this functionality allows the volume resize
code to rely on revalidate_disk(), which is the preferred
mechanism, and removes the need to use check_disk_size_change().

In order for bops->check_events() to lookup the zvol_state_t
stored in the disk->private_data the zvol_state_lock needs to
be held.  Since the check events interface may poll the mutex
has been converted to a rwlock for better concurrently.  The
rwlock need only be taken as a writer in the zvol_free() path
when disk->private_data is set to NULL.

The configure checks for the block_device_operations structure
were consolidated in a single kernel-block-device-operations.m4
file.

The ZFS_AC_KERNEL_BDEV_BLOCK_DEVICE_OPERATIONS configure checks
and assoicated dead code was removed.  This interface was added
to the 2.6.28 kernel which predates the oldest supported 2.6.32
kernel and will therefore always be available.

Updated maximum Linux version in META file.  The 4.17 kernel
was released on 2018-06-03 and ZoL is compatible with the
finalized kernel.

Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com>
Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7611
2018-06-15 15:05:21 -07:00
Allan Jude 29445fe3a0 Reserve DMU_BACKUP_FEATURE for ZSTD
Reserve bit 25 for the ZSTD compression feature from FreeBSD.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Allan Jude <allanjude@freebsd.org>
Closes #7626
2018-06-14 09:47:26 -07:00
Matthew Ahrens 1fac63e56f OpenZFS 9577 - remove zfs_dbuf_evict_key tsd
The zfs_dbuf_evict_key TSD (thread-specific data) is not necessary -
we can instead pass a flag down in a few places to prevent recursive
dbuf eviction. Making this change has 3 benefits:

1. The code semantics are easier to understand.
2. On Linux, performance is improved, because creating/removing
   TSD values (by setting to NULL vs non-NULL) is expensive, and
   we do it very often.
3. According to Nexenta, the current semantics can cause a
   deadlock when concurrently calling dmu_objset_evict_dbufs()
   (which is rare today, but they are working on a "parallel
   unmount" change that triggers this more easily):

Porting Notes:
* Minor conflict with OpenZFS 9337 which has not yet been ported.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://illumos.org/issues/9577
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/645
External-issue: DLPX-58547
Closes #7602
2018-06-13 11:05:06 -07:00
Tom Caputi e7504d7a18 Raw receive functions must not decrypt data
This patch fixes a small bug found where receive_spill() sometimes
attempted to decrypt spill blocks when doing a raw receive. In
addition, this patch fixes another small issue in arc_buf_fill()'s
error handling where a decryption failure (which could be caused by
the first bug) would attempt to set the arc header's IO_ERROR flag
without holding the header's lock.

Reviewed-by: Matthew Thode <prometheanfire@gentoo.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7564 
Closes #7584 
Closes #7592
2018-06-06 10:16:41 -07:00
Paul Dagnelie 37fb3e4318 OpenZFS 8484 - Implement aggregate sum and use for arc counters
In pursuit of improving performance on multi-core systems, we should
implements fanned out counters and use them to improve the performance of
some of the arc statistics. These stats are updated extremely frequently,
and can consume a significant amount of CPU time.

Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Paul Dagnelie <pcd@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/8484
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7028a8b92b7
Issue #3752
Closes #7462
2018-06-06 09:35:59 -07:00
Tony Hutter f0ed6c7448 Add pool state /proc entry, "SUSPENDED" pools
1. Add a proc entry to display the pool's state:

$ cat /proc/spl/kstat/zfs/tank/state
ONLINE

This is done without using the spa config locks, so it will
never hang.

2. Fix 'zpool status' and 'zpool list -o health' output to print
"SUSPENDED" instead of "ONLINE" for suspended pools.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7331 
Closes #7563
2018-06-06 09:33:54 -07:00
Brian Behlendorf 2d9142c9d4
Remove rwlock wrappers
The only remaining consumer of the rwlock compatibility wrappers
is ztest.  Remove the wrappers and convert the few remaining
calls to the underlying pthread functions.

    rwlock_init()    -> pthread_rwlock_init()
    rwlock_destroy() -> pthread_rwlock_destroy()
    rw_rdlock()      -> pthread_rwlock_rdlock()
    rw_wrlock()      -> pthread_rwlock_wrlock()
    rw_unlock()      -> pthread_rwlock_unlock()

Note pthread_rwlock_init() defaults to PTHREAD_PROCESS_PRIVATE
which is equivilant to the USYNC_THREAD behavior.  There is no
functional change.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7591
2018-06-04 16:52:10 -07:00
Serapheim Dimitropoulos e48afbc4eb OpenZFS 9464 - txg_kick() fails to see that we are quiescing
txg_kick() fails to see that we are quiescing, forcing transactions to
their next stages without leaving them accumulate changes

Creating a fragmented pool in a DCenter VM and continuously writing to it with
multiple instances of randwritecomp, we get the following output from txg.d:

    0ms   311MB in  4114ms (95% p1)  75MB/s  544MB (76%)  336us   153ms     0ms
    0ms     8MB in    51ms ( 0% p1) 163MB/s  474MB (66%)  129us    34ms     0ms
    0ms   366MB in  4454ms (93% p1)  82MB/s  572MB (79%)  498us    20ms     0ms
    0ms   406MB in  5212ms (95% p1)  77MB/s  591MB (82%)  661us    37ms     0ms
    0ms   340MB in  5110ms (94% p1)  66MB/s  622MB (86%) 1048us    41ms     1ms
    0ms     3MB in    61ms ( 0% p1)  51MB/s  419MB (58%)   33us     0ms     0ms
    0ms   361MB in  3555ms (88% p1) 101MB/s  542MB (75%)  335us    40ms     0ms
    0ms   356MB in  4592ms (92% p1)  77MB/s  561MB (78%)  430us    89ms     1ms
    0ms    11MB in   129ms (13% p1)  90MB/s  507MB (70%)  222us    15ms     0ms
    0ms   281MB in  2520ms (89% p1) 111MB/s  542MB (75%)  334us    42ms     0ms
    0ms   383MB in  3666ms (91% p1) 104MB/s  557MB (77%)  411us   133ms     0ms
    0ms   404MB in  5757ms (94% p1)  70MB/s  635MB (88%) 1274us   123ms     2ms
    4ms   367MB in  4172ms (89% p1)  88MB/s  556MB (77%)  401us    51ms     0ms
    0ms    42MB in   470ms (44% p1)  90MB/s  557MB (77%)  412us    43ms     0ms
    0ms   261MB in  2273ms (88% p1) 114MB/s  556MB (77%)  407us    27ms     0ms
    0ms   394MB in  3646ms (85% p1) 108MB/s  552MB (77%)  393us   304ms     0ms
    0ms   275MB in  2416ms (89% p1) 113MB/s  510MB (71%)  200us    53ms     0ms
    0ms     9MB in    53ms ( 0% p1) 169MB/s  483MB (67%)  140us   100ms     1ms

The TXGs that are getting synced and don't have lots of changes are pushed by
txg_kick() which basically forces the current open txg to get to the quiesced
state:

        if (tx->tx_syncing_txg == 0 &&
        tx->tx_quiesce_txg_waiting <= tx->tx_open_txg &&
        tx->tx_sync_txg_waiting <= tx->tx_synced_txg &&
        tx->tx_quiesced_txg <= tx->tx_synced_txg) {
        tx->tx_quiesce_txg_waiting = tx->tx_open_txg + 1;
        cv_broadcast(&tx->tx_quiesce_more_cv);
    }

The problem is that the above code doesn't check if we are currently quiescing
anything (only if a quiesce or a sync has been requested, ..etc) so the
following scenario can happen:

1] We have an open txg A that had enough dirty data (more than
   zfs_dirty_data_sync) and it was pushed to the quiesced state, and opened
   a new txg B. No txg is currently being synced.
2] Immediately after the opening of B, txg_kick() was run by some other write
   (and because of A's dirty data) and saw that we are not currently syncing
   any txg and no one has requested quiescing so it requests one by bumping
   tx_quiesce_txg_waiting and broadcasts the quiesce thread.
3] The quiesce thread just passed txg A to be synced and sees that a quiescing
   request has been sent to it so it immediately grabs B without letting it
   gather enough data, putting it in a quiesced state and opening a new txg C.

In this scenario txg B, is an example of how the entries of interest show up in
the txg.d output.

Ideally we would like txg_kick() to get triggered only when we are sure that
we are not syncing AND not quiescing any txg. This way we can kick an open TXG
to the quiescing state when we are sure that there is nothing going on and we
would benefit from the different states running concurrently.

Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://illumos.org/issues/9464
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1cd7635b
Closes #7587
2018-06-04 14:56:06 -07:00
Pavel Zakharov 8a393be353 OpenZFS 9235 - rename zpool_rewind_policy_t to zpool_load_policy_t
We want to be able to pass various settings during import/open of a
pool, which are not only related to rewind. Instead of adding a new
policy and duplicate a bunch of code, we should just rename
rewind_policy to a more generic term like load_policy.

For instance, we'd like to set spa->spa_import_flags from the nvlist,
rather from a flags parameter passed to spa_import as in some cases we
want those flags not only for the import case, but also for the open
case. One such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb)
which would allow zfs to open a pool when logs are missing.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://illumos.org/issues/9235
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d2b1e44
Closes #7532
2018-06-04 14:54:20 -07:00
Sara Hartse 74d42600d8 zpool reopen should detect expanded devices
Update bdev_capacity to have wholedisk vdevs query the
size of the underlying block device (correcting for the size
of the efi parition and partition alignment) and therefore detect
expanded space.

Correct vdev_get_stats_ex so that the expandsize is aligned
to metaslab size and new space is only reported if it is large
enough for a new metaslab.

Reviewed by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Wren Kennedy <jwk404@gmail.com>
Signed-off-by: sara hartse <sara.hartse@delphix.com>
External-issue: LX-165
Closes #7546 
Issue #7582
2018-05-31 10:36:37 -07:00
Brian Behlendorf 93ce2b4ca5 Update build system and packaging
Minimal changes required to integrate the SPL sources in to the
ZFS repository build infrastructure and packaging.

Build system and packaging:
  * Renamed SPL_* autoconf m4 macros to ZFS_*.
  * Removed redundant SPL_* autoconf m4 macros.
  * Updated the RPM spec files to remove SPL package dependency.
  * The zfs package obsoletes the spl package, and the zfs-kmod
    package obsoletes the spl-kmod package.
  * The zfs-kmod-devel* packages were updated to add compatibility
    symlinks under /usr/src/spl-x.y.z until all dependent packages
    can be updated.  They will be removed in a future release.
  * Updated copy-builtin script for in-kernel builds.
  * Updated DKMS package to include the spl.ko.
  * Updated stale AUTHORS file to include all contributors.
  * Updated stale COPYRIGHT and included the SPL as an exception.
  * Renamed README.markdown to README.md
  * Renamed OPENSOLARIS.LICENSE to LICENSE.
  * Renamed DISCLAIMER to NOTICE.

Required code changes:
  * Removed redundant HAVE_SPL macro.
  * Removed _BOOT from nvpairs since it doesn't apply for Linux.
  * Initial header cleanup (removal of empty headers, refactoring).
  * Remove SPL repository clone/build from zimport.sh.
  * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due
    to build issues when forcing C99 compilation.
  * Replaced legacy ACCESS_ONCE with READ_ONCE.
  * Include needed headers for `current` and `EXPORT_SYMBOL`.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
TEST_ZIMPORT_SKIP="yes"
Closes #7556
2018-05-29 16:00:33 -07:00
Brian Behlendorf 1272941f49 Merge branch 'zfsonlinux/merge-spl'
Merge a minimal version of the zfsonlinux/spl repository in to the
zfsonlinux/zfs repository.  Care was taken to prevent file conflicts
when merging and to preserve the spl repository history.  The spl
kernel module remains under the GPLv2 license as documented by the
additional THIRDPARTYLICENSE.gplv2 file.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2018-05-29 14:57:55 -07:00
Brian Behlendorf a91258913f Prepare SPL repo to merge with ZFS repo
This commit removes everything from the repository except the core
SPL implementation for Linux.  Those files which remain have been
moved to non-conflicting locations to facilitate the merge.
The README.md and associated files have been updated accordingly.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2018-05-29 14:51:39 -07:00
Matthew Ahrens 0dc2f70c5c OpenZFS 9486 - reduce memory used by device removal on fragmented pools
Device removal allocates a new location for each allocated segment on
the disk that's being removed.  Each allocation results in one entry in
the mapping table, which maps from old location + length to new
location.  When a fragmented disk is removed, this can result in a large
number of mapping entries, and thus a large amount of memory consumed by
the mapping table.  In the worst real-world cases, we've seen around 1GB
of RAM per 1TB of storage removed.

We can improve on this situation by allocating larger segments, which
span across both allocated and free regions of the device being removed.
By including free regions in the allocation (and thus mapping), we
reduce the number of mapping entries.  For example, if we have a 4K
allocation followed by 1K free and then 4K allocated, we would allocate
4+1+4 = 9KB, and then move the entire region (including allocated and
free parts).  In this case we used one mapping where previously we would
have used two, but often the ratio is much higher (up to 20:1 in
real-world use).  We then need to mark the regions that were free on the
removing device as free in the new locations, and also obsolete in the
mapping entry.

This method preserves the fragmentation of the removing device, rather
than consolidating its allocated space into a small number of chunks
where possible.  But it results in drastic reduction of memory used by
the mapping table - around 20x in the most-fragmented cases.

In the most fragmented real-world cases, this reduces memory used by the
mapping from ~1GB to ~50MB of RAM per 1TB of storage removed.  Less
fragmented cases will typically also see around 50-100MB of RAM per 1TB
of storage.

Porting notes:

* Add the following as module parameters:
    * zfs_condense_indirect_vdevs_enable
    * zfs_condense_max_obsolete_bytes

* Document the following module parameters:
   * zfs_condense_indirect_vdevs_enable
   * zfs_condense_max_obsolete_bytes
   * zfs_condense_min_mapping_bytes

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9486
OpenZFS-commit: https://github.com/ahrens/illumos/commit/07152e142e44c
External-issue: DLPX-57962
Closes #7536
2018-05-24 10:18:07 -07:00
Pavel Zakharov 6cb8e5306d OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recovery
Some work has been done lately to improve the debugability of the ZFS pool
load (and import) process. This includes:

	7638 Refactor spa_load_impl into several functions
	8961 SPA load/import should tell us why it failed
	7277 zdb should be able to print zfs_dbgmsg's

To iterate on top of that, there's a few changes that were made to make the
import process more resilient and crash free. One of the first tasks during the
pool load process is to parse a config provided from userland that describes
what devices the pool is composed of. A vdev tree is generated from that config,
and then all the vdevs are opened.

The Meta Object Set (MOS) of the pool is accessed, and several metadata objects
that are necessary to load the pool are read. The exact configuration of the
pool is also stored inside the MOS. Since the configuration provided from
userland is external and might not accurately describe the vdev tree
of the pool at the txg that is being loaded, it cannot be relied upon to safely
operate the pool. For that reason, the configuration in the MOS is read early
on. In the past, the two configurations were compared together and if there was
a mismatch then the load process was aborted and an error was returned.

The latter was a good way to ensure a pool does not get corrupted, however it
made the pool load process needlessly fragile in cases where the vdev
configuration changed or the userland configuration was outdated. Since the MOS
is stored in 3 copies, the configuration provided by userland doesn't have to be
perfect in order to read its contents. Hence, a new approach has been adopted:
The pool is first opened with the untrusted userland configuration just so that
the real configuration can be read from the MOS. The trusted MOS configuration
is then used to generate a new vdev tree and the pool is re-opened.

When the pool is opened with an untrusted configuration, writes are disabled
to avoid accidentally damaging it. During reads, some sanity checks are
performed on block pointers to see if each DVA points to a known vdev;
when the configuration is untrusted, instead of panicking the system if those
checks fail we simply avoid issuing reads to the invalid DVAs.

This new two-step pool load process now allows rewinding pools accross
vdev tree changes such as device replacement, addition, etc. Loading a pool
from an external config file in a clustering environment also becomes much
safer now since the pool will import even if the config is outdated and didn't,
for instance, register a recent device addition.

With this code in place, it became relatively easy to implement a
long-sought-after feature: the ability to import a pool with missing top level
(i.e. non-redundant) devices. Note that since this almost guarantees some loss
of data, this feature is for now restricted to a read-only import.

Porting notes (ZTS):
* Fix 'make dist' target in zpool_import

* The maximum path length allowed by tar is 99 characters.  Several
  of the new test cases exceeded this limit resulting in them not
  being included in the tarball.  Shorten the names slightly.

* Set/get tunables using accessor functions.

* Get last synced txg via the "zfs_txg_history" mechanism.

* Clear zinject handlers in cleanup for import_cache_device_replaced
  and import_rewind_device_replaced in order that the zpool can be
  exported if there is an error.

* Increase FILESIZE to 8G in zfs-test.sh to allow for a larger
  ext4 file system to be created on ZFS_DISK2.  Also, there's
  no need to partition ZFS_DISK2 at all.  The partitioning had
  already been disabled for multipath devices.  Among other things,
  the partitioning steals some space from the ext4 file system,
  makes it difficult to accurately calculate the paramters to
  parted and can make some of the tests fail.

* Increase FS_SIZE and FILE_SIZE in the zpool_import test
  configuration now that FILESIZE is larger.

* Write more data in order that device evacuation take lonnger in
  a couple tests.

* Use mkdir -p to avoid errors when the directory already exists.

* Remove use of sudo in import_rewind_config_changed.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9075
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123
Closes #7459
2018-05-08 21:35:27 -07:00
Pavel Zakharov 4a0ee12af8 OpenZFS 8961 - SPA load/import should tell us why it failed
Problem
=======

When we fail to open or import a storage pool, we typically don't
get any additional diagnostic information, just "no pool found" or
"can not import".

While there may be no additional user-consumable information, we should
at least make this situation easier to debug/diagnose for developers
and support.  For example, we could start by using `zfs_dbgmsg()`
to log each thing that we try when importing, and which things
failed. E.g. "tried uberblock of txg X from label Y of device Z". Also,
we could log each of the stages that we go through in `spa_load_impl()`.

Solution
========

Following the cleanup to `spa_load_impl()`, debug messages have been
added to every point of failure in that function. Additionally,
debug messages have been added to strategic places, such as
`vdev_disk_open()`.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/8961
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/418079e0
Closes #7459
2018-05-08 21:30:10 -07:00
Tom Caputi be9a5c355c Add support for decryption faults in zinject
This patch adds the ability for zinject to trigger decryption
and authentication faults in the ZIO and ARC layers. This
functionality is exposed via the new "decrypt" error type, which
may be provided for "data" object types.

This patch also refactors some of the core encryption / decryption
functions so that they have consistent prototypes, handle errors
consistently, and do not have unused arguments.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7474
2018-05-02 15:36:20 -07:00
Brian Behlendorf 9464b9591e
RHEL 7.5 compat: FMODE_KABI_ITERATE
As of RHEL 7.5 the mainline fops.iterate() method was added to
the file_operations structure and is correctly detected by the
configure script.

Normally this is what we want, but in order to maintain KABI
compatibility the RHEL change additionally does the following:

* Requires that callers intending to use this extended interface
  set the FMODE_KABI_ITERATE flag on the file structure when
  opening the directory.
* Adds the fops.iterate() method to the end of the structure,
  without removing fops.readdir().

This change updates the configure check to ignore the RHEL 7.5+
variant of fops.iterate() when detected.  Instead fallback to
the fops.readdir() interface which will be available.

Finally, add the 'zpl_' prefix to the directory context wrappers
to avoid colliding with the kernel provided symbols when both
the fops.iterate() and fops.readdir() are provided by the kernel.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7460 
Closes #7463
2018-05-02 15:01:24 -07:00
Matthew Ahrens 964c2d69a9 OpenZFS 9236 - nuke spa_dbgmsg
We should use zfs_dbgmsg instead of spa_dbgmsg. Or at least,
metaslab_condense() should call zfs_dbgmsg because it's important and
rare enough to always log. It's possible that the message in
zio_dva_allocate() would be too high-frequency for zfs_dbgmsg.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Patch Notes:
* Removed ZFS_DEBUG_SPA from zfs-module-parameters.5

OpenZFS-issue: https://www.illumos.org/issues/9236
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cfaba7f668
Closes #7467
2018-04-30 10:19:48 -07:00
Chunwei Chen 599b864813 Fix ENOSPC in "Handle zap_add() failures in ..."
Commit cc63068 caused ENOSPC error when copy a large amount of files
between two directories. The reason is that the patch limits zap leaf
expansion to 2 retries, and return ENOSPC when failed.

The intent for limiting retries is to prevent pointlessly growing table
to max size when adding a block full of entries with same name in
different case in mixed mode. However, it turns out we cannot use any
limit on the retry. When we copy files from one directory in readdir
order, we are copying in hash order, one leaf block at a time. Which
means that if the leaf block in source directory has expanded 6 times,
and you copy those entries in that block, by the time you need to expand
the leaf in destination directory, you need to expand it 6 times in one
go. So any limit on the retry will result in error where it shouldn't.

Note that while we do use different salt for different directories, it
seems that the salt/hash function doesn't provide enough randomization
to the hash distance to prevent this from happening.

Since cc63068 has already been reverted. This patch adds it back and
removes the retry limit.

Also, as it turn out, failing on zap_add() has a serious side effect for
mzap_upgrade(). When upgrading from micro zap to fat zap, it will
call zap_add() to transfer entries one at a time. If it hit any error
halfway through, the remaining entries will be lost, causing those files
to become orphan. This patch add a VERIFY to catch it.

Reviewed-by: Sanjeev Bagewadi <sanjeev.bagewadi@gmail.com>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Albert Lee <trisk@forkgnu.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #7401 
Closes #7421
2018-04-18 14:19:50 -07:00
Matthew Ahrens 0c03d21ac9 assertion in arc_release() during encrypted receive
In the existing code, when doing a raw (encrypted) zfs receive, 
we call arc_convert_to_raw() from open context. This creates a 
race condition between arc_release()/arc_change_state() and 
writing out the block from syncing context (arc_write_ready/done()).

This change makes it so that when we are doing a raw (encrypted) 
zfs receive, we save the crypt parameters (salt, iv, mac) of dnode 
blocks in the dbuf_dirty_record_t, and call arc_convert_to_raw() 
from syncing context when writing out the block of dnodes.

Additionally, we can eliminate dr_raw and associated setters, and 
instead know that dnode blocks are always raw when doing a zfs 
receive (see the new field os_raw_receive).

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #7424 
Closes #7429
2018-04-17 11:06:54 -07:00
Serapheim Dimitropoulos 9d5b524597 OpenZFS 9079 - race condition in starting and ending condensing thread for indirect vdevs
The timeline of the race condition is the following:

[1] Thread A is about to finish condesing the first vdev in
    spa_condense_indirect_thread(), so it calls the
    spa_condense_indirect_complete_sync() sync task which sets
    the spa_condensing_indirect field to NULL. Waiting for the
    sync task to finish, thread A sleeps until the txg is done.
    When this happens, thread A will acquire spa_async_lock and
    set spa_condense_thread to NULL.

[2] While thread A waits for the txg to finish, thread B which is
    running spa_sync() checks whether it should condense the
    second vdev in vdev_indirect_should_condense() by checking the
    spa_condensing_indirect field which was set to NULL by
    spa_condense_indirect_thread() from thread A. So it goes on
    and tries to spawn a new condensing thread in
    spa_condense_indirect_start_sync() and the aforementioned
    assertions fails because thread A has not set spa_condense_thread
    to NULL (which is basically the last thing it does before returning).

The main issue here is that we rely on both spa_condensing_indirect
and spa_condense_thread to signify whether a condensing thread is
running. Ideally we would only use one throughout the codebase. In
addition, for managing spa_condense_thread we currently use
spa_async_lock which basically tights condensing to scrubing when
it comes to pausing and resuming those actions during spa export.

This commit introduces the ZTHR infrastructure, which is basically
threads created during spa_load()/spa_create() and exist until we
export or destroy the pool. ZTHRs sleep the majority of the time,
until they are notified to wake up and do some predefined type of work.

In the context of the current bug, a zthr to does the condensing of
indirect mappings replacing the older code that used bare kthreads.
When a pool is created, the condensing zthr is spawned but sleeps
right away, until it is awaken by a signal from spa_sync(). If an
existing pool is loaded, the condensing zthr looks if there is
anything to condense before going to sleep, in case we were condensing
mappings in the pool before it got exported.

The benefits of this solution are the following:
- The current bug is fixed
- spa_condensing_indirect is the sole indicator of whether we are
  currently condensing or not
- condensing is more decoupled from the spa_async_thread related
  functionality.

As a final note, this commit also sets up the path on upstreaming
other features that use the ZTHR code like zpool checkpoint and
fast clone deletion.

Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Ported-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9079
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3dc606ee
Closes #6900
2018-04-14 12:23:53 -07:00
Matthew Ahrens 9e052db462 OpenZFS 9290 - device removal reduces redundancy of mirrors
Mirrors are supposed to provide redundancy in the face of whole-disk
failure and silent damage (e.g. some data on disk is not right, but ZFS
hasn't detected the whole device as being broken). However, the current
device removal implementation bypasses some of the mirror's redundancy.
Note that in no case is incorrect data returned, but we might get a
checksum error when we should have been able to find the right data.

There are two underlying problems:

1. When we remove a mirror device, we only read one side of the mirror.
Since we can't verify the checksum, this side may be silently bad, but
the good data is on the other side of the mirror (which we didn't read).
This can cause the removal to "bake in" the busted data – all copies of
the data in the new location are the same, busted version, while we left
the good version behind.

The fix for this is to read and copy both sides of the mirror. If the
old and new vdevs are mirrors, we will read both sides of the old
mirror, and write each copy to the corresponding side of the new mirror.
(If the old and new vdevs have a different number of children, we will
do this as best as possible.) Even though we aren't verifying checksums,
this ensures that as long as there's a good copy of the data, we'll have
a good copy after the removal, even if there's silent damage to one side
of the mirror. If we're removing a mirror that has some silent damage,
we'll have exactly the same damage in the new location (assuming that
the new location is also a mirror).

2. When we read from an indirect vdev that points to a mirror vdev, we
only consider one copy of the data. This can lead to reduced effective
redundancy, because we might read a bad copy of the data from one side
of the mirror, and not retry the other, good side of the mirror.

Note that the problem is not with the removal process, but rather after
the removal has completed (having copied correct data to both sides of
the mirror), if one side of the new mirror is silently damaged, we
encounter the problem when reading the relocated data via the indirect
vdev. Also note that the problem doesn't occur when ZFS knows that one
side of the mirror is bad, e.g. when a disk entirely fails or is
offlined.

The impact is that reads (from indirect vdevs that point to mirrors) may
return a checksum error even though the good data exists on one side of
the mirror, and scrub doesn't repair all data on the mirror (if some of
it is pointed to via an indirect vdev).

The fix for this is complicated by "split blocks" - one logical block
may be split into two (or more) pieces with each piece moved to a
different new location. In this case we need to read all versions of
each split (one from each side of the mirror), and figure out which
combination of versions results in the correct checksum, and then repair
the incorrect versions.

This ensures that we supply the same redundancy whether you use device
removal or not. For example, if a mirror has small silent errors on all
of its children, we can still reconstruct the correct data, as long as
those errors are at sufficiently-separated offsets (specifically,
separated by the largest block size - default of 128KB, but up to 16MB).

Porting notes:

* A new indirect vdev check was moved from dsl_scan_needs_resilver_cb()
  to dsl_scan_needs_resilver(), which was added to ZoL as part of the
  sequential scrub work.

* Passed NULL for zfs_ereport_post_checksum()'s zbookmark_phys_t
  parameter.  The extra parameter is unique to ZoL.

* When posting indirect checksum errors the ABD can be passed directly,
  zfs_ereport_post_checksum() is not yet ABD-aware in OpenZFS.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9290
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/591
Closes #6900
2018-04-14 12:21:39 -07:00
Matthew Ahrens a1d477c24c OpenZFS 7614, 9064 - zfs device evacuation/removal
OpenZFS 7614 - zfs device evacuation/removal
OpenZFS 9064 - remove_mirror should wait for device removal to complete

This project allows top-level vdevs to be removed from the storage pool
with "zpool remove", reducing the total amount of storage in the pool.
This operation copies all allocated regions of the device to be removed
onto other devices, recording the mapping from old to new location.
After the removal is complete, read and free operations to the removed
(now "indirect") vdev must be remapped and performed at the new location
on disk.  The indirect mapping table is kept in memory whenever the pool
is loaded, so there is minimal performance overhead when doing operations
on the indirect vdev.

The size of the in-memory mapping table will be reduced when its entries
become "obsolete" because they are no longer used by any block pointers
in the pool.  An entry becomes obsolete when all the blocks that use
it are freed.  An entry can also become obsolete when all the snapshots
that reference it are deleted, and the block pointers that reference it
have been "remapped" in all filesystems/zvols (and clones).  Whenever an
indirect block is written, all the block pointers in it will be "remapped"
to their new (concrete) locations if possible.  This process can be
accelerated by using the "zfs remap" command to proactively rewrite all
indirect blocks that reference indirect (removed) vdevs.

Note that when a device is removed, we do not verify the checksum of
the data that is copied.  This makes the process much faster, but if it
were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be
possible to copy the wrong data, when we have the correct data on e.g.
the other side of the mirror.

At the moment, only mirrors and simple top-level vdevs can be removed
and no removal is allowed if any of the top-level vdevs are raidz.

Porting Notes:

* Avoid zero-sized kmem_alloc() in vdev_compact_children().

    The device evacuation code adds a dependency that
    vdev_compact_children() be able to properly empty the vdev_child
    array by setting it to NULL and zeroing vdev_children.  Under Linux,
    kmem_alloc() and related functions return a sentinel pointer rather
    than NULL for zero-sized allocations.

* Remove comment regarding "mpt" driver where zfs_remove_max_segment
  is initialized to SPA_MAXBLOCKSIZE.

  Change zfs_condense_indirect_commit_entry_delay_ticks to
  zfs_condense_indirect_commit_entry_delay_ms for consistency with
  most other tunables in which delays are specified in ms.

* ZTS changes:

    Use set_tunable rather than mdb
    Use zpool sync as appropriate
    Use sync_pool instead of sync
    Kill jobs during test_removal_with_operation to allow unmount/export
    Don't add non-disk names such as "mirror" or "raidz" to $DISKS
    Use $TEST_BASE_DIR instead of /tmp
    Increase HZ from 100 to 1000 which is more common on Linux

    removal_multiple_indirection.ksh
        Reduce iterations in order to not time out on the code
        coverage builders.

    removal_resume_export:
        Functionally, the test case is correct but there exists a race
        where the kernel thread hasn't been fully started yet and is
        not visible.  Wait for up to 1 second for the removal thread
        to be started before giving up on it.  Also, increase the
        amount of data copied in order that the removal not finish
        before the export has a chance to fail.

* MMP compatibility, the concept of concrete versus non-concrete devices
  has slightly changed the semantics of vdev_writeable().  Update
  mmp_random_leaf_impl() accordingly.

* Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool
  feature which is not supported by OpenZFS.

* Added support for new vdev removal tracepoints.

* Test cases removal_with_zdb and removal_condense_export have been
  intentionally disabled.  When run manually they pass as intended,
  but when running in the automated test environment they produce
  unreliable results on the latest Fedora release.

  They may work better once the upstream pool import refectoring is
  merged into ZoL at which point they will be re-enabled.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alex Reece <alex@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://www.illumos.org/issues/7614
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb
Closes #6900
2018-04-14 12:16:17 -07:00
Seth Forshee 93b43af10d Allow mounting datasets more than once
Currently mounting an already mounted zfs dataset results in an
error, whereas it is typically allowed with other filesystems.
This causes some bad interactions with mount namespaces. Take
this sequence for example:

- Create a dataset
- Create a snapshot of the dataset
- Create a clone of the snapshot
- Create a new mount namespace
- Rename the original dataset

The rename results in unmounting and remounting the clone in the
original mount namespace, however the remount fails because the
dataset is still mounted in the new mount namespace. (Note that
this means the mount in the new mount namespace is never being
unmounted, so perhaps the unmount/remount of the clone isn't
actually necessary.)

The problem here is a result of the way mounting is implemented
in the kernel module. Since it is not mounting block devices it
uses mount_nodev() instead of the usual mount_bdev(). However,
mount_nodev() is written for filesystems for which each mount is
a new instance (i.e. a new super block), and zfs should be able
to detect when a mount request can be satisfied using an existing
super block.

Change zpl_mount() to call sget() directly with it's own test
callback. Passing the objset_t object as the fs data allows
checking if a superblock already exists for the dataset, and in
that case we just need to return a new reference for the sb's
root dentry.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Closes #5796
Closes #7207
2018-04-13 10:44:05 -07:00
Brian Behlendorf d6bb22171b
Linux compat 4.16: blk_queue_flag_{set,clear}
The HAVE_BLK_QUEUE_WRITE_CACHE_GPL_ONLY case was overlooked in
the original 10f88c5c commit because blk_queue_write_cache()
was available for the in-kernel builds.

Update the blk_queue_flag_{set,clear} wrappers to call the locked
versions to avoid confusion.  This is safe for all existing callers.

The blk_queue_set_write_cache() function has been updated to use
these wrappers.  This means setting/clearing both QUEUE_FLAG_WC
and QUEUE_FLAG_FUA is no longer atomic but this only done early
in zvol_alloc() prior to any requests so there is no issue.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Kash Pande <kash@tripleback.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7428 
Closes #7431
2018-04-12 19:46:14 -07:00
Tom Caputi edc1e713c2 Fix race in dnode_check_slots_free()
Currently, dnode_check_slots_free() works by checking dn->dn_type
in the dnode to determine if the dnode is reclaimable. However,
there is a small window of time between dnode_free_sync() in the
first call to dsl_dataset_sync() and when the useraccounting code
is run when the type is set DMU_OT_NONE, but the dnode is not yet
evictable, leading to crashes. This patch adds the ability for
dnodes to track which txg they were last dirtied in and adds a
check for this before performing the reclaim.

This patch also corrects several instances when dn_dirty_link was
treated as a list_node_t when it is technically a multilist_node_t.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7147 
Closes #7388
2018-04-10 11:15:05 -07:00
Giuseppe Di Natale 10f88c5cd5 Linux compat 4.16: blk_queue_flag_{set,clear}
queue_flag_{set,clear}_unlocked are now private interfaces in
the Linux kernel (https://github.com/torvalds/linux/commit/8a0ac14).
Use blk_queue_flag_{set,clear} interfaces which were introduced as
of https://github.com/torvalds/linux/commit/8814ce8.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #7410
2018-04-10 10:32:14 -07:00
Giuseppe Di Natale 9125f8f5bd Linux compat 4.16: SECTOR_SIZE
As of https://github.com/torvalds/linux/commit/233bde21,
SECTOR_SIZE is defined in linux/blkdev.h. Define SECTOR_SIZE
in sunldi.h only if it's not already defined.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #697
2018-04-09 17:20:06 -07:00
Tony Hutter 4f301661df Revert "Handle zap_add() failures in mixed ... "
This reverts commit cc63068e95.

Under certain circumstances this change can result in an ENOSPC
error when adding new files to a directory.  See #7401 for full
details.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Issue #7401 
Cloes #7416
2018-04-09 14:24:46 -07:00
Matthew Ahrens 5c27ec1088 Fixes for SNPRINTF_BLKPTR with encrypted BP's
mdb doesn't have dmu_ot[], so we need a different mechanism for its
SNPRINTF_BLKPTR() to determine if the BP is encrypted vs authenticated.

Additionally, since it already relies on BP_IS_ENCRYPTED (etc),
SNPRINTF_BLKPTR might as well figure out the "crypt_type" on its own,
rather than making the caller do so.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #7390
2018-04-06 13:30:26 -07:00
Brian Behlendorf 581bc01a07
Remove sysevents
These headers are provided in the ZFS repository and never used
by the SPL.  Remove them to ensure the right ones are included.

Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #696
2018-04-04 09:54:20 -07:00
Tom Caputi a2c2ed1bd4 Decryption error handling improvements
Currently, the decryption and block authentication code in
the ZIO / ARC layers is a bit inconsistent with regards to
the ereports that are produces and the error codes that are
passed to calling functions. This patch ensures that all of
these errors (which begin as ECKSUM) are converted to EIO
before they leave the ZIO or ARC layer and that ereports
are correctly generated on each decryption / authentication
failure.

In addition, this patch fixes a bug in zio_decrypt() where
ECKSUM never gets written to zio->io_error.

Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7372
2018-03-31 11:12:51 -07:00
LOLi 77d8a0f1a4 Fix hung z_zvol tasks during 'zfs receive'
During a receive operation zvol_create_minors_impl() can wait
needlessly for the prefetch thread because both share the same tasks
queue.  This results in hung tasks:

<3>INFO: task z_zvol:5541 blocked for more than 120 seconds.
<3>      Tainted: P           O  3.16.0-4-amd64
<3>"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.

The first z_zvol:5541 (zvol_task_cb) is waiting for the long running
traverse_prefetch_thread:260

root@linux:~# cat /proc/spl/taskq
taskq                       act  nthr  spwn  maxt   pri  mina
spl_system_taskq/0            1     2     0    64   100     1
	active: [260]traverse_prefetch_thread [zfs](0xffff88003347ae40)
	wait: 5541
spl_delay_taskq/0             0     1     0     4   100     1
	delay: spa_deadman [zfs](0xffff880039924000)
z_zvol/1                      1     1     0     1   120     1
	active: [5541]zvol_task_cb [zfs](0xffff88001fde6400)
	pend: zvol_task_cb [zfs](0xffff88001fde6800)

This change adds a dedicated, per-pool, prefetch taskq to prevent the
traverse code from monopolizing the global (and limited) system_taskq by
inappropriately scheduling long running tasks on it.

Reviewed-by: Albert Lee <trisk@forkgnu.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6330 
Closes #6890 
Closes #7343
2018-03-30 12:10:01 -07:00
Andriy Gapon 5e00213e43 OpenZFS 9164 - assert: newds == os->os_dsl_dataset
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <don.brady@delphix.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes:
* Re-enabled and tweaked the zpool_upgrade_007_pos test case
  to successfully run in under 5 minutes.

OpenZFS-issue: https://www.illumos.org/issues/9164
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0e776dc06a
Closes #6112
Closes #7336
2018-03-30 12:00:40 -07:00
Matthew Ahrens 2fd92c3d6c enable zfs_dbgmsg() by default, without dprintf()
zfs_dbgmsg() should record a message by default.  As a general
principal, these messages shouldn't be too verbose.  Furthermore, the
amount of memory used is limited to 4MB (by default).

dprintf() should only record a message if this is a debug build, and
ZFS_DEBUG_DPRINTF is set in zfs_flags.  This flag is not set by default
(even on debug builds).  These messages are extremely verbose, and
sometimes nontrivial to compute.

SET_ERROR() should only record a message if ZFS_DEBUG_SET_ERROR is set
in zfs_flags.  This flag is not set by default (even on debug builds).

This brings our behavior in line with illumos.  Note that the message
format is unchanged (including file, line, and function, even though
these are not recorded on illumos).

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #7314
2018-03-21 15:37:32 -07:00
Tom Caputi 089fbf313c Add comments for portable dnode / objset flags
This patch adds some comments describing the purpose of "portable"
dnode and objset flags so that it is clear when new flags should
be added to the repective flag masks. This patch includes no
functional changes.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7313
2018-03-20 11:55:21 -07:00
Alek P 272b5d730f Add JSON output support to channel programs
The changes piggyback JSON output support on top of channel programs 
(#6558).  This way the JSON output support is targeted to scripting 
use cases and is easily maintainable since it really only touches 
one function (zfs_do_channel_program()).

This patch ports Joyent's JSON nvlist library from illumos to enable 
easy JSON printing of channel program output nvlist.  To keep the 
delta small I also took advantage of the fact that printing in
zfs_do_channel_program() was almost always done before exiting 
the program.

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #7281
2018-03-19 12:40:58 -07:00
Olaf Faaland cec3a0a1bb Report pool suspended due to MMP
When the pool is suspended, record whether it was due to an I/O error or
due to MMP writes failing to succeed within the required time.

Change spa_suspended from uint8_t to zio_suspend_reason_t to store the
reason.

When userspace queries pool status via spa_tryimport(), report the
reason the pool was suspended in a new key,
ZPOOL_CONFIG_SUSPENDED_REASON.

In libzfs, when interpreting the returned config nvlist, report
suspension due to MMP with a new pool status enum value,
ZPOOL_STATUS_IO_FAILURE_MMP.

In status_callback(), which generates and emits the message when 'zpool
status' is executed, add a case to print an appropriate message for the
new pool status enum value.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7296
2018-03-15 10:56:55 -07:00
Chunwei Chen 9470cbd4f9 Fix race in trace point in zrl_add_impl
We hit an illegal memory access in the zrlock trace point. The problem
is that zrl->zr_owner and zrl->zr_caller are assigned locklessly. And if
zrl->zr_owner got assigned a longer string between when __string()
calculate the strlen, and when __assign_str() does strcpy. The copy will
overflow the buffer.

==
For example:

Initial condition:
zrl->zr_owner = A
zrl->zr_caller = "abc"

Thread A                                 Thread B
-------------------------------------------------
if (zrl->zr_owner == A) {
  DTRACE_PROBE2() {
    __string() {
      strlen(zrl->zr_caller) -> 3
      allocate buf[4]
    }

                                        zrl->zr_owner = B
				        zrl->zr_caller = "abcd"

    __assign_str() {
      strcpy(buf, zrl->zr_caller) <- buffer overflow
==

Dereferencing zrl->zr_owner->pid may also be problematic, in that the
zrl->zr_owner got changed to other task, and that task exits, freeing
the task_struct. This should be very unlikely, as the other task need to
zrl_remove and exit between the dereferencing zr->zr_owner and
zr->zr_owner->pid. Nevertheless, we'll deal with it as well.

To fix the zrl->zr_caller issue, instead of copy the string content, we
just copy the pointer, this is safe because it always points to
__func__, which is static. As for the zrl->zr_owner issue, we pass in
curthread instead of using zrl->zr_owner.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #7291
2018-03-12 11:27:02 -07:00
Tomohiro Kusumi 6b8655ad3f Change functions which return literals to return `const char*`
get_format_prompt_string() and zpool_state_to_name() return
a string literal which is read-only, thus they should return
`const char*`.

zpool_get_prop_string() returns a non-const string after
successful nv-lookup, and returns a string literal otherwise.
Since this function is designed to be used for read-only purpose,
the return type should also be `const char*`.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes #7285
2018-03-09 13:47:32 -08:00
Olaf Faaland d2160d0538 Record skipped MMP writes in multihost_history
Once per pass through the MMP thread's loop, the vdev tree is walked to
find a suitable leaf to write the next MMP block to.  If no such leaf is
found, the thread sleeps for a while and resumes at the top of the loop.

Add an entry to multihost_history when no leaf can be found, and record
the reason in the error column.  The error code for such entries is a
bitfield, displayed in hex:

0x1  At least one vdev (interior or leaf) was not writeable.
0x2  At least one writeable leaf vdev was found, but it had a pending
MMP write.

timestamp = the time in seconds since the epoch when no leaf could be
found originally.

duration = the time (in ns) during which no MMP block was written for
this reason.  This does not include the preceeding inter-write period
nor the following inter-write period.

vdev_guid = the number of sequential cycles of the MMP thread looop when
this occurred.

Sample output, truncated to fit:

For records of skipped MMP writes the right-most column, vdev_path, is
reported as "-".

id   txg  timestamp   error  duration    mmp_delay  vdev_guid     ...
936  11   1520036441  0      146264      891422313  1740883117838 ...
937  11   1520036441  0      163956      888356657  7320395061548 ...
938  11   1520036442  0      130690      885314969  7320395061548 ...
939  11   1520036442  0      2001068577  882296582  1740883117838 ...
940  11   1520036443  0      161806      882296582  7320395061548 ...
941  11   1520036443  0x2    0           998020546  1             ...
942  11   1520036444  0      136585      998020546  7320395061548 ...
943  11   1520036444  0x2    0           998020257  1             ...
944  11   1520036445  5      2002662964  994160219  1740883117838 ...
945  11   1520036445  0x2    998073118   994160219  3             ...
946  11   1520036447  0      247136      994160219  7320395061548 ...

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7212
2018-03-06 15:15:15 -08:00
Giuseppe Di Natale dd3e1e3083 Linux 4.16 compat: get_disk_and_module()
As of https://github.com/torvalds/linux/commit/fb6d47a, get_disk()
is now get_disk_and_module(). Add a configure check to determine
if we need to use get_disk_and_module().

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #7264
2018-03-05 12:44:35 -08:00
Tony Hutter 80d52c3919 Change checksum & IO delay ratelimit values
Change checksum & IO delay ratelimit thresholds from 5/sec to 20/sec.
This allows zed to actually trigger if a bunch of these events arrive in
a short period of time (zed has a threshold of 10 events in 10 sec).
Previously, if you had, say, 100 checksum errors in 1 sec, it would get
ratelimited to 5/sec which wouldn't trigger zed to fault the drive.

Also, convert the checksum and IO delay thresholds to module params for
easy testing.

Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7252
2018-03-04 17:34:51 -08:00
Tom Caputi 095495e008 Raw DRR_OBJECT records must write raw data
b1d21733 made it possible for empty metadnode blocks to be
compressed to a hole, fixing a bug that would cause invalid
metadnode MACs when a send stream attempted to free objects
and allowing the blocks to be reclaimed when they were no
longer needed. However, this patch also introduced a race
condition; if a txg sync occurred after a DRR_OBJECT_RANGE
record was received but before any objects were added, the
metadnode block would be compressed to a hole and lose all
of its encryption parameters. This would cause subsequent
DRR_OBJECT records to fail when they attempted to write
their data into an unencrypted block. This patch defers the
DRR_OBJECT_RANGE handling to receive_object() so that the
encryption parameters are set with each object that is
written into that block.

Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7215 
Closes #7236
2018-02-27 09:04:05 -08:00
Tim Chase 8b5814393f Incorrect maximum DVA value in DDE_GET_NDVAS()
The conditional was reversed which caused garbage values to be used when
calculating dds_ref_dsize.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #7234
2018-02-26 14:20:12 -08:00
chrisrd e9a7729008 Fix free memory calculation on v3.14+
Provide infrastructure to auto-configure to enum and API changes in the
global page stats used for our free memory calculations.

arc_free_memory has been broken since an API change in Linux v3.14:

2016-07-28 v4.8 599d0c95 mm, vmscan: move LRU lists to node
2016-07-28 v4.8 75ef7184 mm, vmstat: add infrastructure for per-node
  vmstats

These commits moved some of global_page_state() into
global_node_page_state(). The API change was particularly egregious as,
instead of breaking the old code, it silently did the wrong thing and we
continued using global_page_state() where we should have been using
global_node_page_state(), thus indexing into the wrong array via
NR_SLAB_RECLAIMABLE et al.

There have been further API changes along the way:

2017-07-06 v4.13 385386cf mm: vmstat: move slab statistics from zone to
  node counters
2017-09-06 v4.14 c41f012a mm: rename global_page_state to
  global_zone_page_state

...and various (incomplete, as it turns out) attempts to accomodate
these changes in ZoL:

2017-08-24 2209e409 Linux 4.8+ compatibility fix for vm stats
2017-09-16 787acae0 Linux 3.14 compat: IO acct, global_page_state, etc
2017-09-19 661907e6 Linux 4.14 compat: IO acct, global_page_state, etc

The config infrastructure provided here resolves these issues going back
to the original API change in v3.14 and is robust against further Linux
changes in this area.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes #7170
2018-02-23 08:50:06 -08:00
Olaf Faaland 7088545d01 Report duration and error in mmp_history entries
After an MMP write completes, update the relevant mmp_history entry
with the time between submission and completion, and the error
status of the write.

[faaland1@toss3a zfs]$ cat /proc/spl/kstat/zfs/pool/multihost
39 0 0x01 100 8800 69147946270893 72723903122926
id       txg     timestamp  error  duration   mmp_delay    vdev_guid
10607    1166    1518985089 0      138301     637785455    4882...
10608    1166    1518985089 0      136154     635407747    1151...
10609    1166    1518985089 0      803618560  633048078    9740...
10610    1166    1518985090 0      144826     633048078    4882...
10611    1166    1518985090 0      164527     666187671    1151...

Where duration = gethrtime_in_done_fn - gethrtime_at_submission, and
error = zio->io_error.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7190
2018-02-22 15:34:34 -08:00
Tony Hutter a5369b61a2 Linux 4.16 compat: use correct *_dec_and_test()
Use refcount_dec_and_test() on 4.16+ kernels, atomic_dec_and_test()
on older kernels.  https://lwn.net/Articles/714974/

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #7179 
Closes: #7211
2018-02-22 09:02:06 -08:00
DeHackEd 2b5cd5990f Fix multiple evaluations of VERIFY() and ASSERT() on failures
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: DHE <git@dehacked.net>
Closes #684 
Closes #685
2018-02-21 14:54:26 -08:00
LOLi faa97c1619 Want 'zfs send -b'
This change implements 'zfs send -b' which can be used to send only
received property values whether or not they are overridden by local
settings.

This can be very useful during "restore" operations from a backup pool
because it allows to send only the property values originally sent
from the backup source, even though they were later modified on the
destination either by a 'zfs set' operation, explicit 'zfs inherit' or
overridden during the receive process via 'zfs receive -o|-x'.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7156
2018-02-21 12:32:06 -08:00
Tom Caputi b0918402dc Raw receive should change key atomically
Currently, raw zfs sends transfer the encrypted master keys and
objset_phys_t encryption parameters in the DRR_BEGIN payload of
each send file. Both of these are processed as soon as they are
read in dmu_recv_stream(), meaning that the new keys are set
before the new snapshot is received. In addition to the fact that
this changes the user's keys for the dataset earlier than they
might expect, the keys were never reset to what they originally
were in the event that the receive failed. This patch splits the
processing into objset handling and key handling, the later of
which is moved to dmu_recv_end() so that they key change can be
done atomically.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7200
2018-02-21 12:31:03 -08:00
Tom Caputi b1d217338a Raw receives must compress metadnode blocks
Currently, the DMU relies on ZIO layer compression to free LO
dnode blocks that no longer have objects in them. However,
raw receives disable all compression, meaning that these blocks
can never be freed. In addition to the obvious space concerns,
this could also cause incremental raw receives to fail to mount
since the MAC of a hole is different from that of a completely
zeroed block.

This patch corrects this issue by adding a special case in
zio_write_compress() which will attempt to compress these blocks
to a hole even if ZIO_FLAG_RAW_ENCRYPT is set. This patch also
removes the zfs_mdcomp_disable tunable, since tuning it could
cause these same issues.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7198
2018-02-21 12:28:52 -08:00
Tom Caputi 163a8c28dd ZIL claiming should not start user accounting
Currently, ZIL claiming dirties objsets which causes
dsl_pool_sync() to attempt to perform user accounting on
them. This causes problems for encrypted datasets that were
raw received before the system went offline since they
cannot perform user accounting until they have their keys
loaded. This triggers an ASSERT in zio_encrypt(). Since
encryption was added, the code now depends on the fact that
data should only be written when objsets are owned. This
patch adds a check in dmu_objset_do_userquota_updates()
to ensure that useraccounting is only done when the objsets
are actually owned for write. As part of this work, the
zfsvfs and zvol code was updated so that it no longer lies
about owning objsets readonly.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6916 
Closes #7163
2018-02-20 16:27:31 -08:00
Don Brady cbce581353 Fix coverity defects: zfs channel programs
CID 173243, 173245:  Memory - corruptions  (OVERRUN)
 Added size argument to lcompat_sprintf() to avoid use of INT_MAX

CID 173244:  Integer handling issues  (OVERFLOW_BEFORE_WIDEN)
 Added cast to uint64_t to avoid a 32 bit overflow warning

CID 173242:  Integer handling issues  (CONSTANT_EXPRESSION_RESULT)
 Conditionally removed unused luai_numisnan() floating point check

CID 173241:  Resource leaks  (RESOURCE_LEAK)
 Added missing close(fd) on error path

CID 173240:    (UNINIT)
Fixed uninitialized variable in get_special_prop()

CID 147560:  Null pointer dereferences  (NULL_RETURNS)
Cleaned up bad code merge in dsl_dataset_promote_check()

CID 28475:  Memory - illegal accesses  (OVERRUN)
Fixed lcompat_sprintf() to use a size paramater

CID 28418, 28422:  Error handling issues  (CHECKED_RETURN)
Added function result cast to (void) to avoid warning

CID 23935, 28411, 28412:  Memory - corruptions  (ARRAY_VS_SINGLETON)
Added casts to avoid exposing result as an array

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7181
2018-02-20 11:19:42 -08:00
George Wilson ddc751d56b OpenZFS 8857 - zio_remove_child() panic due to already destroyed parent zio
PROBLEM
=======
It's possible for a parent zio to complete even though it has children
which have not completed. This can result in the following panic:
    > $C
    ffffff01809128c0 vpanic()
    ffffff01809128e0 mutex_panic+0x58(fffffffffb94c904, ffffff597dde7f80)
    ffffff0180912950 mutex_vector_enter+0x347(ffffff597dde7f80)
    ffffff01809129b0 zio_remove_child+0x50(ffffff597dde7c58, ffffff32bd901ac0,
    ffffff3373370908)
    ffffff0180912a40 zio_done+0x390(ffffff32bd901ac0)
    ffffff0180912a70 zio_execute+0x78(ffffff32bd901ac0)
    ffffff0180912b30 taskq_thread+0x2d0(ffffff33bae44140)
    ffffff0180912b40 thread_start+8()
    > ::status
    debugging crash dump vmcore.2 (64-bit) from batfs0390
    operating system: 5.11 joyent_20170911T171900Z (i86pc)
    image uuid: (not set)
    panic message: mutex_enter: bad mutex, lp=ffffff597dde7f80
    owner=ffffff3c59b39480 thread=ffffff0180912c40
    dump content: kernel pages only
The problem is that dbuf_prefetch along with l2arc can create a zio tree
which confuses the parent zio and allows it to complete with while children
still exist. Here's the scenario:
    zio tree:
        pio
         |--- lio
The parent zio, pio, has entered the zio_done stage and begins to check its
children to see there are still some that have not completed. In zio_done(),
the children are checked in the following order:
    zio_wait_for_children(zio, ZIO_CHILD_VDEV, ZIO_WAIT_DONE)
    zio_wait_for_children(zio, ZIO_CHILD_GANG, ZIO_WAIT_DONE)
    zio_wait_for_children(zio, ZIO_CHILD_DDT, ZIO_WAIT_DONE)
    zio_wait_for_children(zio, ZIO_CHILD_LOGICAL, ZIO_WAIT_DONE)
If pio, finds any child which has not completed then it stops executing and
goes to sleep. Each call to zio_wait_for_children() will grab the io_lock
while checking the particular child.
In this scenario, the pio has completed the first call to
zio_wait_for_children() to check for any ZIO_CHILD_VDEV children. Since
the only zio in the zio tree right now is the logical zio, lio, then it
completes that call and prepares to check the next child type.
In the meantime, the lio completes and in its callback creates a child vdev
zio, cio. The zio tree looks like this:
    zio tree:
        pio
         |--- lio
         |--- cio
The lio then grabs the parent's io_lock and removes itself.
    zio tree:
        pio
         |--- cio
The pio continues to run but has already completed its check for ZIO_CHILD_VDEV
and will erroneously complete. When the child zio, cio, completes it will panic
the system trying to reference the parent zio which has been destroyed.
SOLUTION
========
The fix is to rework the zio_wait_for_children() logic to accept a bitfield
for all the children types that it's interested in checking. The
io_lock will is held the entire time we check all the children types. Since
the function now accepts a bitfield, a simple ZIO_CHILD_BIT() macro is provided
to allow for the conversion between a ZIO_CHILD type and the bitfield used by
the zio_wiat_for_children logic.

Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Youzhong Yang <youzhong@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8857
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/862ff6d99c
Issue #5918
Closes #7168
2018-02-14 15:30:09 -08:00
Nasf-Fan 9c5167d19f Project Quota on ZFS
Project quota is a new ZFS system space/object usage accounting
and enforcement mechanism. Similar as user/group quota, project
quota is another dimension of system quota. It bases on the new
object attribute - project ID.

Project ID is a numerical value to indicate to which project an
object belongs. An object only can belong to one project though
you (the object owner or privileged user) can change the object
project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly.
The object also can inherit the project ID from its parent when
created if the parent has the project inherit flag (that can be
set via 'chattr +P' or 'zfs project -s [-p]').

By accounting the spaces/objects belong to the same project, we
can know how many spaces/objects used by the project. And if we
set the upper limit then we can control the spaces/objects that
are consumed by such project. It is useful when multiple groups
and users cooperate for the same project, or a user/group needs
to participate in multiple projects.

Support the following commands and functionalities:

zfs set projectquota@project
zfs set projectobjquota@project

zfs get projectquota@project
zfs get projectobjquota@project
zfs get projectused@project
zfs get projectobjused@project

zfs projectspace

zfs allow projectquota
zfs allow projectobjquota
zfs allow projectused
zfs allow projectobjused

zfs unallow projectquota
zfs unallow projectobjquota
zfs unallow projectused
zfs unallow projectobjused

chattr +/-P
chattr -p project_id
lsattr -p

This patch also supports tree quota based on the project quota via
"zfs project" commands set as following:
zfs project [-d|-r] <file|directory ...>
zfs project -C [-k] [-r] <file|directory ...>
zfs project -c [-0] [-d|-r] [-p id] <file|directory ...>
zfs project [-p id] [-r] [-s] <file|directory ...>

For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on
the $DIR, then the proejct [obj]quota and [obj]used values for the
$DIR's project ID will be shown as the total/free (avail) resource.
Keep the same behavior as EXT4/XFS does.

Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by  Ned Bass <bass6@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fan Yong <fan.yong@intel.com>
TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master"
Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c
Closes #6290
2018-02-13 14:54:54 -08:00
sanjeevbagewadi cc63068e95 Handle zap_add() failures in mixed case mode
With "casesensitivity=mixed", zap_add() could fail when the number of
files/directories with the same name (varying in case) exceed the
capacity of the leaf node of a Fatzap. This results in a ASSERT()
failure as zfs_link_create() does not expect zap_add() to fail. The fix
is to handle these failures and rollback the transactions.

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sanjeev Bagewadi <sanjeev.bagewadi@gmail.com>
Closes #7011 
Closes #7054
2018-02-09 10:15:53 -08:00
Brian Behlendorf f54976dc88 Linux 4.11 compat: avoid refcount_t name conflict
Related to commit 4859fe796, when directly using the kernel's
refcount functions in kernel compatibility code do not map
refcount_t to zfs_refcount_t.  This leads to a type mismatch.

Longer term we should consider renaming refcount_t to
zfs_refcount_t in the zfs code base.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7148
2018-02-08 21:25:51 -08:00
Brian Behlendorf 18f57327e0 Linux 4.16 compat: inode_set_iversion()
A new interface was added to manipulate the version field of an
inode.  Add a inode_set_iversion() wrapper for older kernels and
use the new interface when available.

The i_version field was dropped from the trace point due to the
switch to an atomic64_t i_version type.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7148
2018-02-08 21:25:19 -08:00
Serapheim Dimitropoulos 5b72a38d68 OpenZFS 8677 - Open-Context Channel Programs
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>

We want to be able to run channel programs outside of synching
context. This would greatly improve performance for channel programs
that just gather information, as they won't have to wait for synching
context anymore.

=== What is implemented?

This feature introduces the following:
- A new command line flag in "zfs program" to specify our intention
  to run in open context. (The -n option)
- A new flag/option within the channel program ioctl which selects
  the context.
- Appropriate error handling whenever we try a channel program in
  open-context that contains zfs.sync* expressions.
- Documentation for the new feature in the manual pages.

=== How do we handle zfs.sync functions in open context?

When such a function is found by the interpreter and we are running
in open context we abort the script and we spit out a descriptive
runtime error. For example, given the script below ...

arg = ...
fs = arg["argv"][1]
err = zfs.sync.destroy(fs)
msg = "destroying " .. fs .. " err=" .. err
return msg

if we run it in open context, we will get back the following error:

Channel program execution failed:
[string "channel program"]:3: running functions from the zfs.sync
submodule requires passing sync=TRUE to lzc_channel_program()
(i.e. do not specify the "-n" command line argument)
stack traceback:
            [C]: in function 'destroy'
            [string "channel program"]:3: in main chunk

=== What about testing?

We've introduced new wrappers for all channel program tests that
run each channel program as both (startard & open-context) and
expect the appropriate behavior depending on the program using
the zfs.sync module.

OpenZFS-issue: https://www.illumos.org/issues/8677
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15
Closes #6558
2018-02-08 16:05:57 -08:00
Serapheim Dimitropoulos 8d103d8856 OpenZFS 8604 - Simplify snapshots unmounting code
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>

Every time we want to unmount a snapshot (happens during snapshot
deletion or renaming) we unnecessarily iterate through all the
mountpoints in the VFS layer (see zfs_get_vfs).

The current patch completely gets rid of that code and changes
the approach while keeping the behavior of that code path the
same. Specifically, it puts a hold on the dataset/snapshot and
gets its vfs resource reference directly, instead of linearly
searching for it. If that reference exists we attempt to amount
it.

With the above change, it became obvious that the nvlist
manipulations that we do (add_boolean and add_nvlist) take a
significant amount of time ensuring uniqueness of every new
element even though they don't have too. Thus, we updated the
patch so those nvlists are not trying to enforce the uniqueness
of their elements.

A more complete analysis of the problem solved by this patch
can be found below:
https://sdimitro.github.io/post/snap-unmount-perf/

OpenZFS-issue: https://www.illumos.org/issues/8604
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/126118fb
2018-02-08 15:29:44 -08:00
Chris Williamson 234c91c508 OpenZFS 8600 - ZFS channel programs - snapshot
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>

ZFS channel programs should be able to create snapshots.
In addition to the base snapshot functionality, this entails extra
logic to handle edge cases which were formerly not possible, such as
creating then destroying a snapshot in the same transaction sync.

OpenZFS-issue: https://www.illumos.org/issues/8600
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/68089b8b
2018-02-08 15:29:24 -08:00
Brad Lewis af07368986 OpenZFS 8592 - ZFS channel programs - rollback
Authored by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>

ZFS channel programs should be able to perform a rollback.

OpenZFS-issue: https://www.illumos.org/issues/8592
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d46b5ed6
2018-02-08 15:29:14 -08:00
Chris Williamson d99a015343 OpenZFS 7431 - ZFS Channel Programs
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Don Brady <don.brady@delphix.com>
Ported-by: John Kennedy <john.kennedy@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/7431
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533

Porting Notes:
* The CLI long option arguments for '-t' and '-m' don't parse on linux
* Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc
* Lua implementation is built as its own module (zlua.ko)
* Lua headers consumed directly by zfs code moved to 'include/sys/lua/'
* There is no native setjmp/longjump available in stock Linux kernel.
  Brought over implementations from illumos and FreeBSD
* The get_temporary_prop() was adapted due to VFS platform differences
* Use of inline functions in lua parser to reduce stack usage per C call
* Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
2018-02-08 15:28:18 -08:00
Brian Behlendorf 5461eefe50
Fix cstyle warnings
This patch contains no functional changes.  It is solely intended
to resolve cstyle warnings in order to facilitate moving the spl
source code in to the zfs repository.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #681
2018-02-07 11:49:38 -08:00
Tom Caputi 1b66810bad Change os->os_next_write_raw to work per txg
Currently, os_next_write_raw is a single boolean used for determining
whether or not the next call to dmu_objset_sync() should write out
the objset_phys_t as a raw buffer. Since the boolean is not associated
with a txg, the work simply happens during the next txg, which is not
necessarily the correct one. In the current implementation this issue
was misdiagnosed, resulting in a small hack in dmu_objset_sync() which
seemed to resolve the problem.

This patch changes os_next_write_raw to be an array of booleans, one
for each txg in TXG_OFF and removes the hack.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6864
2018-02-02 11:44:53 -08:00
Tom Caputi 047116ac76 Raw sends must be able to decrease nlevels
Currently, when a raw zfs send file includes a DRR_OBJECT record
that would decrease the number of levels of an existing object,
the object is reallocated with dmu_object_reclaim() which
creates the new dnode using the old object's nlevels. For non-raw
sends this doesn't really matter, but raw sends require that
nlevels on the receive side match that of the send side so that
the checksum-of-MAC tree can be properly maintained. This patch
corrects the issue by freeing the object completely before
allocating it again in this case.

This patch also corrects several issues with dnode_hold_impl()
and related functions that prevented dnodes (particularly
multi-slot dnodes) from being reallocated properly due to
the fact that existing dnodes were not being fully cleaned up
when they were freed.

This patch adds a test to make sure that zfs recv functions
properly with incremental streams containing dnodes of different
sizes.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6821
Closes #6864
2018-02-02 11:43:11 -08:00
Tom Caputi ae76f45cda Encryption Stability and On-Disk Format Fixes
The on-disk format for encrypted datasets protects not only
the encrypted and authenticated blocks themselves, but also
the order and interpretation of these blocks. In order to
make this work while maintaining the ability to do raw
sends, the indirect bps maintain a secure checksum of all
the MACs in the block below it along with a few other
fields that determine how the data is interpreted.

Unfortunately, the current on-disk format erroneously
includes some fields which are not portable and thus cannot
support raw sends. It is not possible to easily work around
this issue due to a separate and much smaller bug which
causes indirect blocks for encrypted dnodes to not be
compressed, which conflicts with the previous bug. In
addition, the current code generates incompatible on-disk
formats on big endian and little endian systems due to an
issue with how block pointers are authenticated. Finally,
raw send streams do not currently include dn_maxblkid when
sending both the metadnode and normal dnodes which are
needed in order to ensure that we are correctly maintaining
the portable objset MAC.

This patch zero's out the offending fields when computing
the bp MAC and ensures that these MACs are always
calculated in little endian order (regardless of the host
system's byte order). This patch also registers an errata
for the old on-disk format, which we detect by adding a
"version" field to newly created DSL Crypto Keys. We allow
datasets without a version (version 0) to only be mounted
for read so that they can easily be migrated. We also now
include dn_maxblkid in raw send streams to ensure the MAC
can be maintained correctly.

This patch also contains minor bug fixes and cleanups.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6845
Closes #6864
Closes #7052
2018-02-02 11:37:16 -08:00
Dr. András Korn 4c46b99d24 tx_waited -> tx_dirty_delayed in trace_dmu.h
This change was missed in 0735ecb334.

Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: András Korn <korn-github.com@elan.rulez.org>
Closes #7096
2018-01-31 16:13:26 -08:00
Prakash Surya 0735ecb334 OpenZFS 8997 - ztest assertion failure in zil_lwb_write_issue
PROBLEM
=======

When `dmu_tx_assign` is called from `zil_lwb_write_issue`, it's possible
for either `ERESTART` or `EIO` to be returned.

If `ERESTART` is returned, this will cause an assertion to fail directly
in `zil_lwb_write_issue`, where the code assumes the return value is
`EIO` if `dmu_tx_assign` returns a non-zero value. This can occur if the
SPA is suspended when `dmu_tx_assign` is called, and most often occurs
when running `zloop`.

If `EIO` is returned, this can cause assertions to fail elsewhere in the
ZIL code. For example, `zil_commit_waiter_timeout` contains the
following logic:

    lwb_t *nlwb = zil_lwb_write_issue(zilog, lwb);
    ASSERT3S(lwb->lwb_state, !=, LWB_STATE_OPENED);

In this case, if `dmu_tx_assign` returned `EIO` from within
`zil_lwb_write_issue`, the `lwb` variable passed in will not be issued
to disk. Thus, it's `lwb_state` field will remain `LWB_STATE_OPENED` and
this assertion will fail. `zil_commit_waiter_timeout` assumes that after
it calls `zil_lwb_write_issue`, the `lwb` will be issued to disk, and
doesn't handle the case where this is not true; i.e. it doesn't handle
the case where `dmu_tx_assign` returns `EIO`.

SOLUTION
========

This change modifies the `dmu_tx_assign` function such that `txg_how` is
a bitmask, rather than of the `txg_how_t` enum type. Now, the previous
`TXG_WAITED` semantics can be used via `TXG_NOTHROTTLE`, along with
specifying either `TXG_NOWAIT` or `TXG_WAIT` semantics.

Previously, when `TXG_WAITED` was specified, `TXG_NOWAIT` semantics was
automatically invoked. This was not ideal when using `TXG_WAITED` within
`zil_lwb_write_issued`, leading the problem described above. Rather, we
want to achieve the semantics of `TXG_WAIT`, while also preventing the
`tx` from being penalized via the dirty delay throttling.

With this change, `zil_lwb_write_issued` can acheive the semtantics that
it requires by passing in the value `TXG_WAIT | TXG_NOTHROTTLE` to
`dmu_tx_assign`.

Further, consumers of `dmu_tx_assign` wishing to achieve the old
`TXG_WAITED` semantics can pass in the value `TXG_NOWAIT | TXG_NOTHROTTLE`.

Authored by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Additionally updated `zfs_tmpfile` to use `TXG_NOTHROTTLE`

OpenZFS-issue: https://www.illumos.org/issues/8997
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/19ea6cb0f9
Closes #7084
2018-01-26 20:19:46 -08:00
Brian Behlendorf 8fb1ede146 Extend deadman logic
The intent of this patch is extend the existing deadman code
such that it's flexible enough to be used by both ztest and
on production systems.  The proposed changes include:

* Added a new `zfs_deadman_failmode` module option which is
  used to dynamically control the behavior of the deadman.  It's
  loosely modeled after, but independant from, the pool failmode
  property.  It can be set to wait, continue, or panic.

    * wait     - Wait for the "hung" I/O (default)
    * continue - Attempt to recover from a "hung" I/O
    * panic    - Panic the system

* Added a new `zfs_deadman_ziotime_ms` module option which is
  analogous to `zfs_deadman_synctime_ms` except instead of
  applying to a pool TXG sync it applies to zio_wait().  A
  default value of 300s is used to define a "hung" zio.

* The ztest deadman thread has been re-enabled by default,
  aligned with the upstream OpenZFS code, and then extended
  to terminate the process when it takes significantly longer
  to complete than expected.

* The -G option was added to ztest to print the internal debug
  log when a fatal error is encountered.  This same option was
  previously added to zdb in commit fa603f82.  Update zloop.sh
  to unconditionally pass -G to obtain additional debugging.

* The FM_EREPORT_ZFS_DELAY event which was previously posted
  when the deadman detect a "hung" pool has been replaced by
  a new dedicated FM_EREPORT_ZFS_DEADMAN event.

* The proposed recovery logic attempts to restart a "hung"
  zio by calling zio_interrupt() on any outstanding leaf zios.
  We may want to further restrict this to zios in either the
  ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages.
  Calling zio_interrupt() is expected to only be useful for
  cases when an IO has been submitted to the physical device
  but for some reasonable the completion callback hasn't been
  called by the lower layers.  This shouldn't be possible but
  has been observed and may be caused by kernel/driver bugs.

* The 'zfs_deadman_synctime_ms' default value was reduced from
  1000s to 600s.

* Depending on how ztest fails there may be no cache file to
  move.  This should not be considered fatal, collect the logs
  which are available and carry on.

* Add deadman test cases for spa_deadman() and zio_wait().

* Increase default zfs_deadman_checktime_ms to 60s.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6999
2018-01-25 13:40:38 -08:00
Brian Behlendorf 23602fdb39
Add cv_timedwait_io()
Add missing helper function cv_timedwait_io(), it should be used
when waiting on IO with a specified timeout.

Reviewed-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #674
2018-01-24 11:33:47 -08:00
Brian Behlendorf 31864e3d8c
OpenZFS 8652 - Tautological comparisons with ZPROP_INVAL
usr/src/uts/common/sys/fs/zfs.h
	Change ZPROP_INVAL and ZPROP_CONT from macros to enum values.  Clang
	and GCC both prefer to use unsigned ints to store enums.  That was
	causing tautological comparison warnings (and likely eliminating
	error handling code at compile time) whenever a zfs_prop_t or
	zpool_prop_t was compared to ZPROP_INVAL or ZPROP_CONT.  Making the
	error flags be explicity enum values forces the enum types to be
	signed.

	ZPROP_INVAL was also compared against two different enum types.  I
	had to change its name to ZPOOL_PROP_INVAL whenever its compared to
	a zpool_prop_t.  There are still some places where ZPROP_INVAL or
	ZPROP_CONT is compared to a plain int, in code that doesn't know
	whether the int is storing a zfs_prop_t or a zpool_prop_t.

usr/src/uts/common/fs/zfs/spa.c
	s/ZPROP_INVAL/ZPOOL_PROP_INVAL/

Authored by: Alan Somers <asomers@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8652
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c2de80dc74
Closes #7061
2018-01-19 09:22:37 -08:00
Sean Eric Fagan 43cb30b3ce OpenZFS 8959 - Add notifications when a scrub is paused or resumed
Authored by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

Porting Notes:
- Brought #defines in eventdefs.h in line with ZFS on Linux format.
- Updated zfs-events.5 with the new events.

OpenZFS-issue: https://www.illumos.org/issues/8959
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c862b93eea
Closes #7049
2018-01-17 10:31:00 -08:00
Brian Behlendorf e1a0850c35
Force ztest to always use /dev/urandom
For ztest, which is solely for testing, using a pseudo random
is entirely reasonable.  Using /dev/urandom ensures the system
entropy pool doesn't get depleted thus stalling the testing.
This is a particular problem when testing in VMs.

Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7017 
Closes #7036
2018-01-12 09:36:26 -08:00
Nathaniel Wesley Filardo cba6fc61a2 Revert raidz_map and _col structure types
As part of the refactoring of ab9f4b0b82,
several uint64_t-s and uint8_t-s were changed to other types.  This
caused ZoL github issue #6981, an overflow of a size_t on a 32-bit ARM
machine.  In absense of any strong motivation for the type changes, this
simply puts them back, modulo the changes accumulated for ABD.

Compile-tested on amd64 and run-tested on armhf.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Nathaniel Wesley Filardo <nwf@cs.jhu.edu>
Closes #6981 
Closes #7023
2018-01-09 14:46:52 -08:00
Brian Behlendorf 0873bb6337
Fix ARC hit rate
When the compressed ARC feature was added in commit d3c2ae1
the method of reference counting in the ARC was modified.  As
part of this accounting change the arc_buf_add_ref() function
was removed entirely.

This would have be fine but the arc_buf_add_ref() function
served a second undocumented purpose of updating the ARC access
information when taking a hold on a dbuf.  Without this logic
in place a cached dbuf would not migrate its associated
arc_buf_hdr_t to the MFU list.  This would negatively impact
the ARC hit rate, particularly on systems with a small ARC.

This change reinstates the missing call to arc_access() from
dbuf_hold() by implementing a new arc_buf_access() function.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6171 
Closes #6852 
Closes #6989
2018-01-08 09:52:36 -08:00
Prakash Surya 2fe61a7ecc OpenZFS 8909 - 8585 can cause a use-after-free kernel panic
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: John Kennedy <jwk404@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Prakash Surya <prakash.surya@delphix.com>

PROBLEM
=======

There's a race condition that exists if `zil_free_lwb` races with either
`zil_commit_waiter_timeout` and/or `zil_lwb_flush_vdevs_done`.

Here's an example panic due to this bug:

    > ::status
    debugging crash dump vmcore.0 (64-bit) from ip-10-110-205-40
    operating system: 5.11 dlpx-5.2.2.0_2017-12-04-17-28-32b6ba51fb (i86pc)
    image uuid: 4af0edfb-e58e-6ed8-cafc-d3e9167c7513
    panic message:
    BAD TRAP: type=e (#pf Page fault) rp=ffffff0010555970 addr=60 occurred in module "zfs" due to a NULL pointer dereference
    dump content: kernel pages only

    > $c
    zio_shrink+0x12()
    zil_lwb_write_issue+0x30d(ffffff03dcd15cc0, ffffff03e0730e20)
    zil_commit_waiter_timeout+0xa2(ffffff03dcd15cc0, ffffff03d97ffcf8)
    zil_commit_waiter+0xf3(ffffff03dcd15cc0, ffffff03d97ffcf8)
    zil_commit+0x80(ffffff03dcd15cc0, 9a9)
    zfs_write+0xc34(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0)
    fop_write+0x5b(ffffff03dc38b140, ffffff0010555e60, 40, ffffff03e00fb758, 0)
    write+0x250(42, fffffd7ff4832000, 2000)
    sys_syscall+0x177()

If there's an outstanding lwb that's in `zil_commit_waiter_timeout`
waiting to timeout, waiting on it's waiter's CV, we must be sure not to
call `zil_free_lwb`. If we end up calling `zil_free_lwb`, then that LWB
may be freed and can result in a use-after-free situation where the
stale lwb pointer stored in the `zil_commit_waiter_t` structure of the
thread waiting on the waiter's CV is used.

A similar situation can occur if an lwb is issued to disk, and thus in
the `LWB_STATE_ISSUED` state, and `zil_free_lwb` is called while the
disk is servicing that lwb. In this situation, the lwb will be freed by
`zil_free_lwb`, which will result in a use-after-free situation when the
lwb's zio completes, and `zil_lwb_flush_vdevs_done` is called.

This race condition is prevented in `zil_close` by calling `zil_commit`
before `zil_free_lwb` is called, which will ensure all outstanding (i.e.
all lwb's in the `LWB_STATE_OPEN` and/or `LWB_STATE_ISSUED` states)
reach the `LWB_STATE_DONE` state before the lwb's are freed
(`zil_commit` will not return untill all the lwb's are
`LWB_STATE_DONE`).

Further, this race condition is prevented in `zil_sync` by only calling
`zil_free_lwb` for lwb's that do not have their `lwb_buf` pointer set.
All lwb's not in the `LWB_STATE_DONE` state will have a non-null value
for this pointer; the pointer is only cleared in
`zil_lwb_flush_vdevs_done`, at which point the lwb's state will be
changed to `LWB_STATE_DONE`.

This race *is* present in `zil_suspend`, leading to this bug.

At first glance, it would appear as though this would not be true
because `zil_suspend` will call `zil_commit`, just like `zil_close`, but
the problem is that `zil_suspend` will set the zilog's `zl_suspend`
field prior to calling `zil_commit`. Further, in `zil_commit`, if
`zl_suspend` is set, `zil_commit` will take a special branch of logic
and use `txg_wait_synced` instead of performing the normal `zil_commit`
logic.

This call to `txg_wait_synced` might be good enough for the data to
reach disk safely before it returns, but it does not ensure that all
outstanding lwb's reach the `LWB_STATE_DONE` state before it returns.
This is because, if there's an lwb "stuck" in
`zil_commit_waiter_timeout`, waiting for it's lwb to timeout, it will
maintain a non-null value for it's `lwb_buf` field and thus `zil_sync`
will not free that lwb. Thus, even though the lwb's data is already on
disk, the lwb will be left lingering, waiting on the CV, and will
eventually timeout and be issued to disk even though the write is
unnecessary.

So, after `zil_commit` is called from `zil_suspend`, we incorrectly
assume that there are not outstanding lwb's, and proceed to free all
lwb's found on the zilog's lwb list. As a result, we free the lwb that
will later be used `zil_commit_waiter_timeout`.

SOLUTION
========

The solution to this, is to ensure all outstanding lwb's complete before
calling `zil_free_lwb` via `zil_destroy` in `zil_suspend`. This patch
accomplishes this goal by forcing the normal `zil_commit` logic when
called from `zil_sync`.

Now, `zil_suspend` will call `zil_commit_impl` which will always use the
normal logic of waiting/issuing lwb's to disk before it returns. As a
result, any lwb's outstanding when `zil_commit_impl` is called will be
guaranteed to reach the `LWB_STATE_DONE` state by the time it returns.

Further, no new lwb's will be created via `zil_commit` since the zilog's
`zl_suspend` flag will be set. This will force all new callers of
`zil_commit` to use `txg_wait_synced` instead of creating and issuing
new lwb's.

Thus, all lwb's left on the zilog's lwb list when `zil_destroy` is
called will be in the `LWB_STATE_DONE` state, and we'll avoid this race
condition.

OpenZFS-issue: https://www.illumos.org/issues/8909
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ece62b6f8d
Closes #6940
2017-12-28 10:18:04 -08:00
lidongyang 823d48bfb1 Call commit callbacks from the tail of the list
Our zfs backed Lustre MDT had soft lockups while under heavy metadata
workloads while handling transaction callbacks from osd_zfs.

The problem is zfs is not taking advantage of the fast path in
Lustre's trans callback handling, where Lustre will skip the calls
to ptlrpc_commit_replies() when it already saw a higher transaction
number.

This patch corrects this, it also has a positive impact on metadata
performance on Lustre with osd_zfs, plus some cleanup in the headers.

A similar issue for ext4/ldiskfs is described on:
https://jira.hpdd.intel.com/browse/LU-6527

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Closes #6986
2017-12-22 10:19:51 -08:00
Tom Caputi a8b2e30685 Support re-prioritizing asynchronous prefetches
When sequential scrubs were merged, all calls to arc_read()
(including prefetch IOs) were given ZIO_PRIORITY_ASYNC_READ.
Unfortunately, this behaves badly with an existing issue where
prefetch IOs cannot be re-prioritized after the issue. The
result is that synchronous reads end up in the same vdev_queue
as the scrub IOs and can have (in some workloads) multiple
seconds of latency.

This patch incorporates 2 changes. The first ensures that all
scrub IOs are given ZIO_PRIORITY_SCRUB to allow the vdev_queue
code to differentiate between these I/Os and user prefetches.
Second, this patch introduces zio_change_priority() to provide
the missing capability to upgrade a zio's priority.

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6921 
Closes #6926
2017-12-21 09:13:06 -08:00
Brian Behlendorf c28a67733c
Suppress incorrect objtool warnings
Suppress incorrect warnings from versions of objtool which are not
aware of x86 EVEX prefix instructions used for AVX512.

  module/zfs/vdev_raidz_math_avx512bw.o: warning:
  objtool: <func+offset>: can't find jump dest instruction at .text

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6928
2017-12-07 10:28:50 -08:00
Prakash Surya 1b2b0acab5 OpenZFS 8603 - rename zilog's "zl_writer_lock" to "zl_issuer_lock"
This is a purely cosmetic change. The zilog's "zl_writer_lock" field is
being renamed to "zl_issuer_lock" to try and make the code easier to
understand; no other changes are made.

Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: C Fraire <cfraire@me.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8603
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2daf06546b
Closes #6927
2017-12-06 11:38:10 -08:00
Prakash Surya 1ce23dcaff OpenZFS 8585 - improve batching done in zil_commit()
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Prakash Surya <prakash.surya@delphix.com>

Problem
=======

The current implementation of zil_commit() can introduce significant
latency, beyond what is inherent due to the latency of the underlying
storage. The additional latency comes from two main problems:

 1. When there's outstanding ZIL blocks being written (i.e. there's
    already a "writer thread" in progress), then any new calls to
    zil_commit() will block waiting for the currently oustanding ZIL
    blocks to complete. The blocks written for each "writer thread" is
    coined a "batch", and there can only ever be a single "batch" being
    written at a time. When a batch is being written, any new ZIL
    transactions will have to wait for the next batch to be written,
    which won't occur until the current batch finishes.

    As a result, the underlying storage may not be used as efficiently
    as possible. While "new" threads enter zil_commit() and are blocked
    waiting for the next batch, it's possible that the underlying
    storage isn't fully utilized by the current batch of ZIL blocks. In
    that case, it'd be better to allow these new threads to generate
    (and issue) a new ZIL block, such that it could be serviced by the
    underlying storage concurrently with the other ZIL blocks that are
    being serviced.

 2. Any call to zil_commit() must wait for all ZIL blocks in its "batch"
    to complete, prior to zil_commit() returning. The size of any given
    batch is proportional to the number of ZIL transaction in the queue
    at the time that the batch starts processing the queue; which
    doesn't occur until the previous batch completes. Thus, if there's a
    lot of transactions in the queue, the batch could be composed of
    many ZIL blocks, and each call to zil_commit() will have to wait for
    all of these writes to complete (even if the thread calling
    zil_commit() only cared about one of the transactions in the batch).

To further complicate the situation, these two issues result in the
following side effect:

 3. If a given batch takes longer to complete than normal, this results
    in larger batch sizes, which then take longer to complete and
    further drive up the latency of zil_commit(). This can occur for a
    number of reasons, including (but not limited to): transient changes
    in the workload, and storage latency irregularites.

Solution
========

The solution attempted by this change has the following goals:

 1. no on-disk changes; maintain current on-disk format.
 2. modify the "batch size" to be equal to the "ZIL block size".
 3. allow new batches to be generated and issued to disk, while there's
    already batches being serviced by the disk.
 4. allow zil_commit() to wait for as few ZIL blocks as possible.
 5. use as few ZIL blocks as possible, for the same amount of ZIL
    transactions, without introducing significant latency to any
    individual ZIL transaction. i.e. use fewer, but larger, ZIL blocks.

In theory, with these goals met, the new allgorithm will allow the
following improvements:

 1. new ZIL blocks can be generated and issued, while there's already
    oustanding ZIL blocks being serviced by the storage.
 2. the latency of zil_commit() should be proportional to the underlying
    storage latency, rather than the incoming synchronous workload.

Porting Notes
=============

Due to the changes made in commit 119a394ab0, the lifetime of an itx
structure differs than in OpenZFS. Specifically, the itx structure is
kept around until the data associated with the itx is considered to be
safe on disk; this is so that the itx's callback can be called after the
data is committed to stable storage. Since OpenZFS doesn't have this itx
callback mechanism, it's able to destroy the itx structure immediately
after the itx is committed to an lwb (before the lwb is written to
disk).

To support this difference, and to ensure the itx's callbacks can still
be called after the itx's data is on disk, a few changes had to be made:

  * A list of itxs was added to the lwb structure. This list contains
    all of the itxs that have been committed to the lwb, such that the
    callbacks for these itxs can be called from zil_lwb_flush_vdevs_done(),
    after the data for the itxs is committed to disk.

  * A list of itxs was added on the stack of the zil_process_commit_list()
    function; the "nolwb_itxs" list. In some circumstances, an itx may
    not be committed to an lwb (e.g. if allocating the "next" ZIL block
    on disk fails), so this list is used to keep track of which itxs
    fall into this state, such that their callbacks can be called after
    the ZIL's writer pipeline is "stalled".

  * The logic to actually call the itx's callback was moved into the
    zil_itx_destroy() function. Since all consumers of zil_itx_destroy()
    were effectively performing the same logic (i.e. if callback is
    non-null, call the callback), it seemed like useful code cleanup to
    consolidate this logic into a single function.

Additionally, the existing Linux tracepoint infrastructure dealing with
the ZIL's probes and structures had to be updated to reflect these code
changes. Specifically:

  * The "zil__cw1" and "zil__cw2" probes were removed, so they had to be
    removed from "trace_zil.h" as well.

  * Some of the zilog structure's fields were removed, which affected
    the tracepoint definitions of the structure.

  * New tracepoints had to be added for the following 3 new probes:
      * zil__process__commit__itx
      * zil__process__normal__itx
      * zil__commit__io__error

OpenZFS-issue: https://www.illumos.org/issues/8585
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5d95a3a
Closes #6566
2017-12-05 09:39:16 -08:00
Brian Behlendorf 72841b9fd9
Preserve itx alloc size for zio_data_buf_free()
Using zio_data_buf_alloc() to allocate the itx's may be unsafe
because the itx->itx_lr.lrc_reclen field is not constant from
allocation to free.  Using a different itx->itx_lr.lrc_reclen
size in zio_data_buf_free() can result in the allocation being
returned to the wrong kmem cache.

This issue can be avoided entirely by storing the allocation size
in itx->itx_size and using that for zio_data_buf_free().

Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6912
2017-12-04 11:44:39 -08:00
Tom Caputi d4677269f2 Unbreak the scan status ABI
When d4a72f23 was merged, pss_pass_issued was incorrectly
added to the middle of the pool_scan_stat_t structure
instead of the end. This patch simply corrects this issue.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6909
2017-11-30 09:40:13 -08:00
Tom Caputi d4a72f2386 Sequential scrub and resilvers
Currently, scrubs and resilvers can take an extremely
long time to complete. This is largely due to the fact
that zfs scans process pools in logical order, as
determined by each block's bookmark. This makes sense
from a simplicity perspective, but blocks in zfs are
often scattered randomly across disks, particularly
due to zfs's copy-on-write mechanisms.

This patch improves performance by splitting scrubs
and resilvers into a metadata scanning phase and an IO
issuing phase. The metadata scan reads through the
structure of the pool and gathers an in-memory queue
of I/Os, sorted by size and offset on disk. The issuing
phase will then issue the scrub I/Os as sequentially as
possible, greatly improving performance.

This patch also updates and cleans up some of the scan
code which has not been updated in several years.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Authored-by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Authored-by: Alek Pinchuk <apinchuk@datto.com>
Authored-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #3625 
Closes #6256
2017-11-15 17:27:01 -08:00
Brian Behlendorf ed19bccfb6
Linux 4.14 compat: vfs_read & vfs_write
The kernel_read & kernel_write functions have always wrapped the
vfs_read & vfs_write functions respectively.  However, they could
not be used by vn_rdwr() since the offset wasn't passed as a
pointer.  This prevented us from being able to properly update
the file offset.

Linux 4.14 unexported vfs_read & vfs_write but also changed the
signature of kernel_read & kernel_write to provide the needed
functionality.  Use these updated functions when available.

Reviewed-by: Pritam Baral <pritam@pritambaral.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #656 
Closes #667
2017-11-15 17:19:23 -08:00
benrubson 7c351e31d5 OpenZFS 7531 - Assign correct flags to prefetched buffers
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Authored by: abraunegg <alex.braunegg@gmail.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/7531
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/468008cb
2017-11-11 20:24:34 -08:00
Don Brady 1c27024e22 Undo c89 workarounds to match with upstream
With PR 5756 the zfs module now supports c99 and the
remaining past c89 workarounds can be undone.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #6816
2017-11-04 13:25:13 -07:00
Jason King f3c8c9e6f0 OpenZFS 640 - number_to_scaled_string is duplicated in several commands
Porting Notes:
- The OpenZFS patch added nicenum_scale() and nicenum() to a
  library not used by ZFS.  Rather than pull in a new dependency
  the version of nicenum in lib/libzpool/util.c was simply
  replaced with the new one.

Reviewed by: Sebastian Wiedenroth <wiedi@frubar.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Authored by: Jason King <jason.brian.king@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/640
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0a055120
Closes #6796
2017-10-30 14:47:20 -07:00
Brian Behlendorf 8be3688999
Remove vn_rename and vn_remove
Both vn_rename and vn_remove have been historically problematic
to implement reliably.  Rather than fixing them yet again they
are being removed.

Reviewed-by: Arkadiusz Bubala <arkadiusz.bubala@open-e.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #648 
Closes #661
2017-10-27 15:49:14 -07:00
Brian Behlendorf 867959b588
OpenZFS 8081 - Compiler warnings in zdb
Fix compiler warnings in zdb.  With these changes, FreeBSD can compile
zdb with all compiler warnings enabled save -Wunused-parameter.

usr/src/cmd/zdb/zdb.c
usr/src/cmd/zdb/zdb_il.c
usr/src/uts/common/fs/zfs/sys/sa.h
usr/src/uts/common/fs/zfs/sys/spa.h
	Fix numerous warnings, including:
	* const-correctness
	* shadowing global definitions
	* signed vs unsigned comparisons
	* missing prototypes, or missing static declarations
	* unused variables and functions
	* Unreadable array initializations
	* Missing struct initializers

usr/src/cmd/zdb/zdb.h
	Add a header file to declare common symbols

usr/src/lib/libzpool/common/sys/zfs_context.h
usr/src/uts/common/fs/zfs/arc.c
usr/src/uts/common/fs/zfs/dbuf.c
usr/src/uts/common/fs/zfs/spa.c
usr/src/uts/common/fs/zfs/txg.c
	Add a function prototype for zk_thread_create, and ensure that every
	callback supplied to this function actually matches the prototype.

usr/src/cmd/ztest/ztest.c
usr/src/uts/common/fs/zfs/sys/zil.h
usr/src/uts/common/fs/zfs/zfs_replay.c
usr/src/uts/common/fs/zfs/zvol.c
	Add a function prototype for zil_replay_func_t, and ensure that
	every function of this type actually matches the prototype.

usr/src/uts/common/fs/zfs/sys/refcount.h
	Change FTAG so it discards any constness of __func__, necessary
	since existing APIs expect it passed as void *.

Porting Notes:
- Many of these fixes have already been applied to Linux.  For
  consistency the OpenZFS version of a change was applied if the
  warning was addressed in an equivalent but different fashion.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Authored by: Alan Somers <asomers@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8081
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a
Closes #6787
2017-10-27 12:46:35 -07:00
Brian Behlendorf a032ac4b38 OpenZFS 8558, 8602 - lwp_create() returns EAGAIN
8558 lwp_create() returns EAGAIN on system with more than 80K ZFS filesystems

On a system with more than 80K ZFS filesystems, we've seen cases
where lwp_create() will start to fail by returning EAGAIN. The
problem being, for each of those 80K ZFS filesystems, a taskq will
be created for each dataset as part of the ZIL for each dataset.

Porting Notes:
- The new nomem taskq kstat was dropped.
- Added module options and documentation for new tunings
  zfs_zil_clean_taskq_nthr_pct, zfs_zil_clean_taskq_minalloc,
  zfs_zil_clean_taskq_maxalloc, and zfs_sync_taskq_batch_pct.

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8558
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/216d772

8602 remove unused "dp_early_sync_tasks" field from "dsl_pool" structure

Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Chris Dunlop <chris@onthe.net.au>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8602
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2bcb545
Closes #6779
2017-10-26 12:57:53 -07:00
Arkadiusz Bubała d3f2cd7e3b Added no_scrub_restart flag to zpool reopen
Added -n flag to zpool reopen that allows a running scrub
operation to continue if there is a device with Dirty Time Log.

By default if a component device has a DTL and zpool reopen
is executed all running scan operations will be restarted.

Added functional tests for `zpool reopen`

Tests covers following scenarios:
* `zpool reopen` without arguments,
* `zpool reopen` with pool name as argument,
* `zpool reopen` while scrubbing,
* `zpool reopen -n` while scrubbing,
* `zpool reopen -n` while resilvering,
* `zpool reopen` with bad arguments.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Arkadiusz Bubała <arkadiusz.bubala@open-e.com>
Closes #6076 
Closes #6746
2017-10-26 12:26:09 -07:00
Brian Behlendorf d5e024cba2 Emit history events for 'zpool create'
History commands and events were being suppressed for the
'zpool create' command since the history object did not
yet exist.  Create the object earlier so this history
doesn't get lost.

Split the pool_destroy event in to pool_destroy and
pool_export so they may be distinguished.

Updated events_001_pos and events_002_pos test cases.  They
now check for the expected history events and were reworked
to be more reliable.

Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6712 
Closes #6486
2017-10-23 09:45:59 -07:00
John 6044cf59cd Add convenience 'zfs_get' functions
Add get functions to match existing ones.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Ramsden <johnramsden@riseup.net>
Closes #6308
2017-10-19 11:18:42 -07:00
Brian Behlendorf 21a932b83c Post-Encryption Followup
This PR includes fixes for bugs and documentation issues found 
after the encryption patch was merged and general code improvements 
for long-term maintainability.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue #6526
Closes #6639
Closes #6703
Cloese #6706
Closes #6714
Closes #6595
2017-10-13 10:02:39 -07:00
Damian Wojsław cdc15a7604 Typo in dsl_dataset.h
The parameters dsl_dataset_t *os in function prototype should be
renamed to dsl_dataset_t *ds.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Damian Wojsław <damian@wojslaw.pl>
Closes #6756 
Closes #6273
2017-10-12 17:10:38 -07:00
Tom Caputi 440a3eb939 Fixes for #6639
Several issues were uncovered by running stress tests with zfs
encryption and raw sends in particular. The issues and their
associated fixes are as follows:

* arc_read_done() has the ability to chain several requests for
  the same block of data via the arc_callback_t struct. In these
  cases, the ARC would only use the first request's dsobj from
  the bookmark to decrypt the data. This is problematic because
  the first request might be a prefetch zio which is able to
  handle the key not being loaded, while the second might use a
  different key that it is sure will work. The fix here is to
  pass the dsobj with each individual arc_callback_t so that each
  request can attempt to decrypt the data separately.

* DRR_FREE and DRR_FREEOBJECT records in a send file were not
  having their transactions properly tagged as raw during raw
  sends, which caused a panic when the dbuf code attempted to
  decrypt these blocks.

* traverse_prefetch_metadata() did not properly set
  ZIO_FLAG_SPECULATIVE when issuing prefetch IOs.

* Added a few asserts and code cleanups to ensure these issues
  are more detectable in the future.

Signed-off-by: Tom Caputi <tcaputi@datto.com>
2017-10-11 16:55:50 -04:00
Tom Caputi 4807c0badb Encryption patch follow-up
* PBKDF2 implementation changed to OpenSSL implementation.

* HKDF implementation moved to its own file and tests
  added to ensure correctness.

* Removed libzfs's now unnecessary dependency on libzpool
  and libicp.

* Ztest can now create and test encrypted datasets. This is
  currently disabled until issue #6526 is resolved, but
  otherwise functions as advertised.

* Several small bug fixes discovered after enabling ztest
  to run on encrypted datasets.

* Fixed coverity defects added by the encryption patch.

* Updated man pages for encrypted send / receive behavior.

* Fixed a bug where encrypted datasets could receive
  DRR_WRITE_EMBEDDED records.

* Minor code cleanups / consolidation.

Signed-off-by: Tom Caputi <tcaputi@datto.com>
2017-10-11 16:54:48 -04:00
Fabian Grünbichler 48fbb9ddbf Free objects when receiving full stream as clone
All objects after the last written or freed object are not supposed to
exist after receiving the stream.  Free them accordingly, as if a
freeobjects record for them had been included in the stream.

Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes #5699
Closes #6507
Closes #6616
2017-10-10 15:30:51 -07:00
Brian Behlendorf 0cefc9dbcd Add parenthesis to btop and ptob macros
Add missing parenthesis around btop and ptob macros to ensure
operation ordering is preserved after expansion.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #660
2017-10-10 08:59:17 -07:00
Olaf Faaland ce319db57b Make include/linux/ conform to ZFS style standard
No semantic changes.

Fix the following types of style issues:
	blank after preprocessor #
	#define followed by space instead of tab
	improper first line of block comment
	indent by spaces instead of tabs
	last line in file is blank
	missing blank after open comment
	missing space before left brace
	non-continuation indented 4 spaces
	spaces instead of tabs
	unparenthesized return expression

Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
2017-10-09 14:27:27 -07:00
Olaf Faaland 4b393c50ae Make file headers conform to ZFS style standard
No semantic changes.

Change
 /************\
and
 \************/

to

 /*
and
  */

Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
2017-10-09 14:27:27 -07:00
Brian Behlendorf c11f1004d1 Remove dead code from AVL tree
The avl_update_* functions are never used by ZFS and are therefore
being removed.  They're barely even used in Illumos.  Additionally,
simplify avl_add() by using a VERIFY which produces exactly the same
behavior under Linux.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6716
2017-10-05 19:28:00 -07:00
chrisrd e71cade67d Scale the dbuf cache with arc_c
Commit d3c2ae1 introduced a dbuf cache with a default size of the
minimum of 100M or 1/32 maximum ARC size. (These figures may be adjusted
using dbuf_cache_max_bytes and dbuf_cache_max_shift.) The dbuf cache
is counted as metadata for the purposes of ARC size calculations.

On a 1GB box the ARC maximum size defaults to c_max 493M which gives a
dbuf cache default minimum size of 15.4M, and the ARC metadata defaults
to minimum 16M. I.e. the dbuf cache is an significant proportion of the
minimum metadata size. With other overheads involved this actually means
the ARC metadata doesn't get down to the minimum.

This patch dynamically scales the dbuf cache to the target ARC size
instead of statically scaling it to the maximum ARC size. (The scale is
still set by dbuf_cache_max_shift and the maximum size is still fixed by
dbuf_cache_max_bytes.) Using the target ARC size rather than the current
ARC size is done to help the ARC reach the target rather than simply
focusing on the current size.

Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Issue #6506 
Closes #6561
2017-09-29 15:49:19 -07:00
Giuseppe Di Natale 34d00e7aba Correct cppcheck errors
ZFS buildbot STYLE builder was moved to Ubuntu 17.04
which has a newer version of cppcheck. Handle the
new cppcheck errors.

uu_* functions removed in this commit were unused
and effectively dead code. They are now retired.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6653
2017-09-19 12:17:29 -07:00
David Quigley a9a2bf7152 Remove FRU and LIBTOPO Support
FRU and LIBTOPO support are illumos only features that will not be ported to
Linux and make the code more complicated than necessary. This commit
makes way for further cleanups of the zed/FMA code.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Quigley <david.quigley@intel.com>
Closes #6641
2017-09-18 17:06:40 -07:00
Giuseppe Di Natale 787acae0b5 Linux 3.14 compat: IO acct, global_page_state, etc
generic_start_io_acct/generic_end_io_acct in the master
branch of the linux kernel requires that the request_queue
be provided.

Move the logic from freemem in the spl to arc_free_memory
in arc.c. Do this so we can take advantage of global_page_state
interface checks in zfs.

Upstream kernel replaced struct block_device with
struct gendisk in struct bio. Determine if the
function bio_set_dev exists during configure
and have zfs use that if it exists.

bio_set_dev https://github.com/torvalds/linux/commit/74d4699
global_node_page_state https://github.com/torvalds/linux/commit/75ef718
io acct https://github.com/torvalds/linux/commit/d62e26b

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #6635
2017-09-16 11:00:19 -07:00
LOLi 835db58592 Add -vnP support to 'zfs send' for bookmarks
This leverages the functionality introduced in cf7684b to expose
verbose, dry-run and parsable 'zfs send' options for bookmarks.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #3666 
Closes #6601
2017-09-08 15:24:31 -07:00
Olaf Faaland 4c5b89f59e Improved dnode allocation and dmu_hold_impl()
Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the
code, fix errors introduced by commit dbeb879 (PR #6117) interacting
badly with large dnodes, and improve performance.

* When allocating a new dnode in dmu_object_alloc_dnsize(), update the
percpu object ID for the core's metadnode chunk immediately.  This
eliminates most lock contention when taking the hold and creating the
dnode.

* Correct detection of the chunk boundary to work properly with large
dnodes.

* Separate the dmu_hold_impl() code for the FREE case from the code for
the ALLOCATED case to make it easier to read.

* Fully populate the dnode handle array immediately after reading a
block of the metadnode from disk.  Subsequently the dnode handle array
provides enough information to determine which dnode slots are in use
and which are free.

* Add several kstats to allow the behavior of the code to be examined.

* Verify dnode packing in large_dnode_008_pos.ksh.  Since the test is
purely creates, it should leave very few holes in the metadnode.

* Add test large_dnode_009_pos.ksh, which performs concurrent creates
and deletes, to complement existing test which does only creates.

With the above fixes, there is very little contention in a test of about
200,000 racing dnode allocations produced by tests 'large_dnode_008_pos'
and 'large_dnode_009_pos'.

name                            type data
dnode_hold_dbuf_hold            4    0
dnode_hold_dbuf_read            4    0
dnode_hold_alloc_hits           4    3804690
dnode_hold_alloc_misses         4    216
dnode_hold_alloc_interior       4    3
dnode_hold_alloc_lock_retry     4    0
dnode_hold_alloc_lock_misses    4    0
dnode_hold_alloc_type_none      4    0
dnode_hold_free_hits            4    203105
dnode_hold_free_misses          4    4
dnode_hold_free_lock_misses     4    0
dnode_hold_free_lock_retry      4    0
dnode_hold_free_overflow        4    0
dnode_hold_free_refcount        4    57
dnode_hold_free_txg             4    0
dnode_allocate                  4    203154
dnode_reallocate                4    0
dnode_buf_evict                 4    23918
dnode_alloc_next_chunk          4    4887
dnode_alloc_race                4    0
dnode_alloc_next_block          4    18

The performance is slightly improved for concurrent creates with
16+ threads, and unchanged for low thread counts.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5396 
Closes #6522 
Closes #6414 
Closes #6564
2017-09-05 16:15:04 -07:00
Matthew Ahrens 1e0457e7f5 Enhance comments for large dnode project
Fix a few nits in the comments from large dnodes. Also import
some of the commit message as a comment in the code, making
it more accessible.

Reviewed-by: @rottegift 
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Matt Ahrens <mahrens@delphix.com>
Closes #6551
2017-08-29 09:00:28 -07:00
Tom Caputi 9b8407638d Send / Recv Fixes following b52563
This patch fixes several issues discovered after
the encryption patch was merged:

* Fixed a bug where encrypted datasets could attempt
  to receive embedded data records.

* Fixed a bug where dirty records created by the recv
  code wasn't properly setting the dr_raw flag.

* Fixed a typo where a dmu_tx_commit() was changed to
  dmu_tx_abort()

* Fixed a few error handling bugs unrelated to the
  encryption patch in dmu_recv_stream()

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6512 
Closes #6524 
Closes #6545
2017-08-23 16:54:24 -07:00
Gvozden Neskovic 551905dd47 vdev_mirror: kstat observables for preferred vdev
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #6461
2017-08-21 10:05:54 -07:00
Gvozden Neskovic d6c6590c5d vdev_mirror: load balancing fixes
vdev_queue:
- Track the last position of each vdev, including the io size,
  in order to detect linear access of the following zio.
- Remove duplicate `vq_lastoffset`

vdev_mirror:
- Correctly calculate the zio offset (signedness issue)
- Deprecate `vdev_queue_register_lastoffset()`
- Add `VDEV_LABEL_START_SIZE` to zio offset of leaf vdevs

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #6461
2017-08-21 10:05:16 -07:00
Brian Behlendorf c8f9061fc7 Retire legacy test infrastructure
* Removed zpios kmod, utility, headers and man page.

* Removed unused scripts zpios-profile/*, zpios-test/*,
  zpool-config/*, smb.sh, zpios-sanity.sh, zpios-survey.sh,
  zpios.sh, and zpool-create.sh.

* Removed zfs-script-config.sh.in.  When building 'make' generates
  a common.sh with in-tree path information from the common.sh.in
  template.  This file and sourced by the test scripts and used
  for in-tree testing, it is not included in the packages.  When
  building packages 'make install' uses the same template to
  create a new common.sh which is appropriate for the packaging.

* Removed unused functions/variables from scripts/common.sh.in.
  Only minimal path information and configuration environment
  variables remain.

* Removed unused scripts from scripts/ directory.

* Remaining shell scripts in the scripts directory updated to
  cleanly pass shellcheck and added to checked scripts.

* Renamed tests/test-runner/cmd/ to tests/test-runner/bin/ to
  match install location name.

* Removed last traces of the --enable-debug-dmu-tx configure
  options which was retired some time ago.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6509
2017-08-15 17:26:38 -07:00
Don Brady d977122da9 Add corruption failure option to zinject(8)
Added a 'corrupt' error option that will flip a bit in the data
after a read operation.  This is useful for generating checksum
errors at the device layer (in a mirror config for example). It
is also used to validate the diagnosis of checksum errors from
the zfs diagnosis engine.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #6345
2017-08-14 15:17:15 -07:00
Tom Caputi b525630342 Native Encryption for ZFS on Linux
This change incorporates three major pieces:

The first change is a keystore that manages wrapping
and encryption keys for encrypted datasets. These
commands mostly involve manipulating the new
DSL Crypto Key ZAP Objects that live in the MOS. Each
encrypted dataset has its own DSL Crypto Key that is
protected with a user's key. This level of indirection
allows users to change their keys without re-encrypting
their entire datasets. The change implements the new
subcommands "zfs load-key", "zfs unload-key" and
"zfs change-key" which allow the user to manage their
encryption keys and settings. In addition, several new
flags and properties have been added to allow dataset
creation and to make mounting and unmounting more
convenient.

The second piece of this patch provides the ability to
encrypt, decyrpt, and authenticate protected datasets.
Each object set maintains a Merkel tree of Message
Authentication Codes that protect the lower layers,
similarly to how checksums are maintained. This part
impacts the zio layer, which handles the actual
encryption and generation of MACs, as well as the ARC
and DMU, which need to be able to handle encrypted
buffers and protected data.

The last addition is the ability to do raw, encrypted
sends and receives. The idea here is to send raw
encrypted and compressed data and receive it exactly
as is on a backup system. This means that the dataset
on the receiving system is protected using the same
user key that is in use on the sending side. By doing
so, datasets can be efficiently backed up to an
untrusted system without fear of data being
compromised.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #494 
Closes #5769
2017-08-14 10:36:48 -07:00
gaurkuma 9df9692637 Allow longer SPA names in stats
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: gaurkuma <gauravk.18@gmail.com>
Closes #641
2017-08-11 08:53:35 -07:00
Brian Behlendorf c25b8f99f8 Simplify threads, mutexs, cvs and rwlocks
* Simplify threads, mutexs, cvs and rwlocks

* Update the zk_thread_create() function to use the same trick
  as Illumos.  Specifically, cast the new pthread_t to a void
  pointer and return that as the kthread_t *.  This avoids the
  issues associated with managing a wrapper structure and is
  safe as long as the callers never attempt to dereference it.

* Update all function prototypes passed to pthread_create() to
  match the expected prototype.  We were getting away this with
  before since the function were explicitly cast.

* Replaced direct zk_thread_create() calls with thread_create()
  for code consistency.  All consumers of libzpool now use the
  proper wrappers.

* The mutex_held() calls were converted to MUTEX_HELD().

* Removed all mutex_owner() calls and retired the interface.
  Instead use MUTEX_HELD() which provides the same information
  and allows the implementation details to be hidden.  In this
  case the use of the pthread_equals() function.

* The kthread_t, kmutex_t, krwlock_t, and krwlock_t types had
  any non essential fields removed.  In the case of kthread_t
  and kcondvar_t they could be directly typedef'd to pthread_t
  and pthread_cond_t respectively.

* Removed all extra ASSERTS from the thread, mutex, rwlock, and
  cv wrapper functions.  In practice, pthreads already provides
  the vast majority of checks as long as we check the return
  code.  Removing this code from our wrappers help readability.

* Added TS_JOINABLE state flag to pass to request a joinable rather
  than detached thread.  This isn't a standard thread_create() state
  but it's the least invasive way to pass this information and is
  only used by ztest.

TEST_ZTEST_TIMEOUT=3600

Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4547 
Closes #5503 
Closes #5523 
Closes #6377 
Closes #6495
2017-08-11 08:51:44 -07:00
Brian Behlendorf 46364cb2f3 Add libtpool (thread pools)
OpenZFS provides a library called tpool which implements thread
pools for user space applications.  Porting this library means
the zpool utility no longer needs to borrow the kernel mutex and
taskq interfaces from libzpool.  This code was updated to use
the tpool library which behaves in a very similar fashion.

Porting libtpool was relatively straight forward and minimal
modifications were needed.  The core changes were:

* Fully convert the library to use pthreads.
* Updated signal handling.
* lmalloc/lfree converted to calloc/free
* Implemented portable pthread_attr_clone() function.

Finally, update the build system such that libzpool.so is no
longer linked in to zfs(8), zpool(8), etc.  All that is required
is libzfs to which the zcommon soures were added (which is the way
it always should have been).  Removing the libzpool dependency
resulted in several build issues which needed to be resolved.

* Moved zfeature support to module/zcommon/zfeature_common.c
* Moved ratelimiting to to module/zfs/zfs_ratelimit.c
* Moved get_system_hostid() to lib/libspl/gethostid.c
* Removed use of cmn_err() in zcommon source
* Removed dprintf_setup() call from zpool_main.c and zfs_main.c
* Removed highbit() and lowbit()
* Removed unnecessary library dependencies from Makefiles
* Removed fletcher-4 kstat in user space
* Added sha2 support explicitly to libzfs
* Added highbit64() and lowbit64() to zpool_util.c

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6442
2017-08-09 15:31:08 -07:00
gaurkuma 520faf5ddc Crash in dbuf_evict_one with DTRACE_PROBE
Update the dbuf__evict__one() tracepoint so that it can safely
handle a NULL dmu_buf_impl_t pointer.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>    
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: gaurkuma <gauravk.18@gmail.com>
Closes #6463
2017-08-09 11:04:41 -07:00
Oleg Drokin 98cdcb8286 Remove misguided HAVE_MUTEX_OWNER check, take 2
It is just plain unsafe to peek inside in-kernel
mutex structure and make assumptions about what kernel
does with those internal fields like owner.

Kernel is all too happy to stop doing the expected things
like tracing lock owner once you load a tainted module
like spl/zfs that is not GPL.

As such you will get instant assertion failures like this:

  VERIFY3(((*(volatile typeof((&((&zo->zo_lock)->m_mutex))->owner) *)&
      ((&((&zo->zo_lock)->m_mutex))->owner))) ==
     ((void *)0)) failed (ffff88030be28500 == (null))
  PANIC at zfs_onexit.c:104:zfs_onexit_destroy()
  Showing stack for process 3626
  CPU: 0 PID: 3626 Comm: mkfs.lustre Tainted: P OE ------------ 3.10.0-debug #1
  Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
  Call Trace:
  dump_stack+0x19/0x1b
  spl_dumpstack+0x44/0x50 [spl]
  spl_panic+0xbf/0xf0 [spl]
  zfs_onexit_destroy+0x17c/0x280 [zfs]
  zfsdev_release+0x48/0xd0 [zfs]

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Closes #639
Closes #632
2017-08-02 20:50:27 -07:00
Gvozden Neskovic 261a3151e1 spl-mutex: fix race in mutex_exit
Prevent race on accessing kmutex_t when the mutex is
embedded in a ref counted structure.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes zfsonlinux/zfs#6401
Closes #637
2017-08-02 20:42:58 -07:00
Brian Behlendorf 549423c0d4 Revert "Remove misguided HAVE_MUTEX_OWNER check"
This reverts commit d89616fda8 which
introduced some build failures which need to be resolved before
this can be merged.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #633
2017-08-02 15:08:02 -04:00
Oleg Drokin d89616fda8 Remove misguided HAVE_MUTEX_OWNER check
It is just plain unsafe to peek inside in-kernel
mutex structure and make assumptions about what kernel
does with those internal fields like owner.

Kernel is all too happy to stop doing the expected things
like tracing lock owner once you load a tainted module
like spl/zfs that is not GPL.

As such you will get instant assertion failures like this:

  VERIFY3(((*(volatile typeof((&((&zo->zo_lock)->m_mutex))->owner) *)&
      ((&((&zo->zo_lock)->m_mutex))->owner))) == 
     ((void *)0)) failed (ffff88030be28500 == (null))
  PANIC at zfs_onexit.c:104:zfs_onexit_destroy()
  Showing stack for process 3626
  CPU: 0 PID: 3626 Comm: mkfs.lustre Tainted: P OE ------------ 3.10.0-debug #1
  Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
  Call Trace:
  dump_stack+0x19/0x1b
  spl_dumpstack+0x44/0x50 [spl]
  spl_panic+0xbf/0xf0 [spl]
  zfs_onexit_destroy+0x17c/0x280 [zfs]
  zfsdev_release+0x48/0xd0 [zfs]

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Closes #632 
Closes #633
2017-08-02 11:45:16 -07:00
Ned Bass 8740cf4a2f Add line info and SET_ERROR() to ZFS debug log
Redefine the SET_ERROR macro in terms of __dprintf() so the error
return codes get logged as both tracepoint events (if tracepoints are
enabled) and as ZFS debug log entries.  This also allows us to use
the same definition of SET_ERROR() in kernel and user space.

Define a new debug flag ZFS_DEBUG_SET_ERROR=512 that may be bitwise
or'd into zfs_flags. Setting this flag enables both dprintf() and
SET_ERROR() messages in the debug log. That is, setting
ZFS_DEBUG_SET_ERROR and ZFS_DEBUG_DPRINTF|ZFS_DEBUG_SET_ERROR are
equivalent (this was done for sake of simplicity). Leaving
ZFS_DEBUG_SET_ERROR unset suppresses the SET_ERROR() messages which
helps avoid cluttering up the logs.

To enable SET_ERROR() logging, run:

  echo 1 >   /sys/module/zfs/parameters/zfs_dbgmsg_enable
  echo 512 > /sys/module/zfs/parameters/zfs_flags

Remove the zfs_set_error_class tracepoints event class since
SET_ERROR() now uses __dprintf(). This sacrifices a bit of
granularity when selecting individual tracepoint events to enable but
it makes the code simpler.

Include file, function, and line number information in debug log
entries.  The information is now added to the message buffer in
__dprintf() and as a result the zfs_dprintf_class tracepoints event
class was changed from a 4 parameter interface to a single parameter.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #6400
2017-07-25 23:09:48 -07:00
Olaf Faaland 0582e40322 Add callback for zfs_multihost_interval
Add a callback to wake all running mmp threads when
zfs_multihost_interval is changed.

This is necessary when the interval is changed from a very large value
to a significantly lower one, while pools are imported that have the
multihost property enabled.

Without this commit, the mmp thread does not wake up and detect the new
interval until after it has waited the old multihost interval time.  A
user monitoring mmp writes via the provided kstat would be led to
believe that the changed setting did not work.

Added a test in the ZTS under mmp to verify the new functionality is
working.

Added a test to ztest which starts and stops mmp threads, and calls into
the code to signal sleeping mmp threads, to test for deadlocks or
similar locking issues.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6387
2017-07-25 13:22:20 -04:00
Serapheim Dimitropoulos 829f9251cf OpenZFS 8491 - uberblock on-disk padding to reserve space for smoothly merging zpool checkpoint & MMP in ZFS
The zpool checkpoint feature in DxOS added a new field in the uberblock.
The Multi-Modifier Protection Pull Request from ZoL adds three new fields
in the uberblock (Reference: https://github.com/zfsonlinux/zfs/pull/6279).
As these two changes come from two different sources and once upstreamed
and deployed will introduce an incompatibility with each other we want
to upstream a change that will reserve the padding for both of them so
integration goes smoothly and everyone gets both features.

Porting Notes: Preserved MMP comments in uberblock struct.

Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Olaf Faaland <faaland1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8491
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d84fa5f
Closes #6390
2017-07-24 13:47:51 -04:00
Brian Behlendorf 36ba27e9e0 Linux 4.13 compat: bio->bi_status and blk_status_t
Commit torvalds/linux@4e4cbee9.  The bio->bi_error field was
replaced with bio->bi_status which is an enum that describes
all possible error types.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6351
2017-07-23 19:37:12 -07:00
Brian Behlendorf 944117514d Linux 4.13 compat: wait queues
Commit torvalds/linux@ac6424b9
- Renamed struct wait_queue -> struct wait_queue_entry.

Commit torvalds/linux@2055da97
- Renamed wait_queue_head::task_list -> wait_queue_head::head
- Renamed wait_queue_entry::task_list -> wait_queue_entry::entry

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #629
2017-07-23 19:32:14 -07:00
Olaf Faaland 379ca9cf2b Multi-modifier protection (MMP)
Add multihost=on|off pool property to control MMP.  When enabled
a new thread writes uberblocks to the last slot in each label, at a
set frequency, to indicate to other hosts the pool is actively imported.
These uberblocks are the last synced uberblock with an updated
timestamp.  Property defaults to off.

During tryimport, find the "best" uberblock (newest txg and timestamp)
repeatedly, checking for change in the found uberblock.  Include the
results of the activity test in the config returned by tryimport.
These results are reported to user in "zpool import".

Allow the user to control the period between MMP writes, and the
duration of the activity test on import, via a new module parameter
zfs_multihost_interval.  The period is specified in milliseconds.  The
activity test duration is calculated from this value, and from the
mmp_delay in the "best" uberblock found initially.

Add a kstat interface to export statistics about Multiple Modifier
Protection (MMP) updates. Include the last synced txg number, the
timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV
label that received the last MMP update, and the VDEV path.  Abbreviated
output below.

$ cat /proc/spl/kstat/zfs/mypool/multihost
31 0 0x01 10 880 105092382393521 105144180101111
txg   timestamp  mmp_delay   vdev_guid   vdev_label vdev_path
20468    261337  250274925   68396651780       3    /dev/sda
20468    261339  252023374   6267402363293     1    /dev/sdc
20468    261340  252000858   6698080955233     1    /dev/sdx
20468    261341  251980635   783892869810      2    /dev/sdy
20468    261342  253385953   8923255792467     3    /dev/sdd
20468    261344  253336622   042125143176      0    /dev/sdab
20468    261345  253310522   1200778101278     2    /dev/sde
20468    261346  253286429   0950576198362     2    /dev/sdt
20468    261347  253261545   96209817917       3    /dev/sds
20468    261349  253238188   8555725937673     3    /dev/sdb

Add a new tunable zfs_multihost_history to specify the number of MMP
updates to store history for. By default it is set to zero meaning that
no MMP statistics are stored.

When using ztest to generate activity, for automated tests of the MMP
function, some test functions interfere with the test.  For example, the
pool is exported to run zdb and then imported again.  Add a new ztest
function, "-M", to alter ztest behavior to prevent this.

Add new tests to verify the new functionality.  Tests provided by
Giuseppe Di Natale.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #745
Closes #6279
2017-07-13 13:54:00 -04:00
Prakash Surya dfbd813ec7 Add ASSERT3B/VERIFY3B/USEC2NSEC/NSEC2USEC macros
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes #627
2017-07-13 13:19:15 -04:00
Dave Eddy 12fa0466df OpenZFS 6939 - add sysevents to zfs core for commands
Authored by: Dave Eddy <dave@daveeddy.com>
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Joshua M. Clulow <jmc@joyent.com>
Reviewed by: Josh Wilsdon <jwilsdon@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Alan Somers <asomers@gmail.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6939
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ce1577b
Closes #6328
2017-07-12 21:28:13 -07:00
LOLi cf8738d853 Add port of FreeBSD 'volmode' property
The volmode property may be set to control the visibility of ZVOL
block devices.

This allow switching ZVOL between three modes:
   full - existing fully functional behaviour (default)
   dev  - hide partitions on ZVOL block devices
   none - not exposing volumes outside ZFS

Additionally the new zvol_volmode module parameter can be used to
control the default behaviour.

This functionality can be used, for instance, on "backup" pools to
avoid cluttering /dev with unneeded zd* devices.

Original-patch-by: mav <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>

FreeBSD-commit: https://github.com/freebsd/freebsd/commit/dd28e6bb
Closes #1796 
Closes #3438 
Closes #6233
2017-07-12 13:05:37 -07:00
Yuri Pankov e19572e4cc OpenZFS 5428 - provide fts(), reallocarray(), and strtonum()
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
* All hunks unrelated to ZFS were dropped.

OpenZFS-issue: https://www.illumos.org/issues/5428
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4585130
Closes #6326
2017-07-08 20:35:35 -07:00
Matthew Ahrens a896468c78 OpenZFS 8067 - zdb should be able to dump literal embedded block pointer
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8067
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/8173085
Closes #6319
2017-07-07 11:28:01 -07:00
Alek P 0ea05c64f8 Implemented zpool scrub pause/resume
Currently, there is no way to pause a scrub. Pausing may
be useful when the pool is busy with other I/O to preserve
bandwidth.

This patch adds the ability to pause and resume scrubbing.
This is achieved by maintaining a persistent on-disk scrub state.
While the state is 'paused' we do not scrub any more blocks.
We do however perform regular scan housekeeping such as
freeing async destroyed and deadlist blocks while paused.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Serapheim Dimitropoulos <serapheimd@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6167
2017-07-06 22:16:13 -07:00
Andriy Gapon 8ca78ab002 OpenZFS 7600 - zfs rollback should pass target snapshot to kernel
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

The existing kernel-side code only provides a method to rollback to a
latest snapshot, whatever it happens to be at the time when the rollback
is actually done.  That could be unsafe or confusing in environments
where concurrent DSL changes are possible as the resulting state could
correspond to a newer or older snapshot than the originally requested
one.
This change allows to amend that method such that the rollback is
performed only when the latest snapshot has a specific name.  That is,
if a new snapshot is concurrently created or the target snapshot is
destroyed, then no rollback is done and EXDEV error is returned.
New libzfs_core function lzc_rollback_to() is provided for the new
functionality.  libzfs is changed to use lzc_rollback_to() to implement
zfs rollback command.
Perhaps we should return different errors to distinguish the case where
the desired snapshot exists but it's not the latest snapshot and the
case where the desired snapshot does not exist.

OpenZFS-issue: https://www.illumos.org/issues/7600
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3d645eb
Closes #6292
2017-07-04 15:29:52 -07:00
Andriy Gapon 1579dcbc91 OpenZFS 8416 - abd.h is not C++ friendly
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8416
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/589c189
Closes #6288
2017-06-30 11:11:01 -07:00
Andriy Gapon 2a53d6a12a OpenZFS 8426 - mark immutable buffer arguments as such in abd.h
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8426
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/37359a6
Closes #6287
2017-06-30 11:11:01 -07:00
Giuseppe Di Natale d12f91fde3 OpenZFS 8264 - want support for promoting datasets in libzfs_core
Authored by: Andrew Stormont <astormont@racktopsystems.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@kebe.com>
Approved by: Dan McDonald <danmcd@kebe.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8264
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a4b8c9a
Closes #6254
2017-06-26 16:56:09 -07:00
Tony Hutter 29eb494285 Dashes for zero latency values in zpool iostat -p
This prints dashes instead of zeros for zero latency values in
'zpool iostat -p'.  You'll get zero latencies reported when the
disk is idle, but technically a zero latency is invalid, since you
can't measure the latency of doing nothing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6210
2017-06-22 09:39:01 -07:00
Don Brady 0241e491a0 Inject zinject(8) a percentage amount of dev errs
In the original form of device error injection, it was an all or nothing
situation.  To help simulate intermittent error conditions, you can now
specify a real number percentage value. This is also very useful for our
ZFS fault diagnosis testing and for injecting intermittent errors during
load testing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@intel.com>
Closes #6227
2017-06-16 17:21:11 -07:00
Richard Yao 5228cf0116 Make zvol operations use _by_dnode routines
This continues what was started in
0eef1bde31 by fully converting zvols
to avoid unnecessary dnode_hold() calls. This saves a small amount
of CPU time and slightly improves latencies of operations on zvols.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@prophetstor.com>
Closes #6058
2017-06-13 09:18:08 -07:00
Matthew Ahrens dbeb879699 OpenZFS 8199 - multi-threaded dmu_object_alloc()
dmu_object_alloc() is single-threaded, so when multiple threads are
creating files in a single filesystem, they spend a lot of time waiting
for the os_obj_lock.  To improve performance of multi-threaded file
creation, we must make dmu_object_alloc() typically not grab any
filesystem-wide locks.

The solution is to have a "next object to allocate" for each CPU. Each
of these "next object"s is in a different block of the dnode object, so
that concurrent allocation holds dnodes in different dbufs.  When a
thread's "next object" reaches the end of a chunk of objects (by default
4 blocks worth -- 128 dnodes), it will be reset to the per-objset
os_obj_next, which will be increased by a chunk of objects (128).  Only
when manipulating the os_obj_next will we need to grab the os_obj_lock.
This decreases lock contention dramatically, because each thread only
needs to grab the os_obj_lock briefly, once per 128 allocations.

This results in a 70% performance improvement to multi-threaded object
creation (where each thread is creating objects in its own directory),
from 67,000/sec to 115,000/sec, with 8 CPUs.

Work sponsored by Intel Corp.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/8199
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/374
Closes #4703
Closes #6117
2017-06-09 09:43:26 -07:00
Giuseppe Di Natale 1b7c1e5ce9 OpenZFS 7578 - Fix/improve some aspects of ZIL writing
- After some ZIL changes 6 years ago zil_slog_limit got partially broken
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.

 - Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG.  Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.

 - Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size.  In some
cases efficiency stopped to almost as low as 50%.  In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas.  This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently.  Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.

 - While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.

Sponsored by:   iXsystems, Inc.

Authored by: Alexander Motin <mav@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <ryao@gentoo.org>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/7578
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aeb13ac
Closes #6191
2017-06-09 09:15:37 -07:00
Matthew Ahrens 82644107c4 OpenZFS 8155 - simplify dmu_write_policy handling of pre-compressed buffers
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

When writing pre-compressed buffers, arc_write() requires that
the compression algorithm used to compress the buffer matches
the compression algorithm requested by the zio_prop_t, which is
set by dmu_write_policy(). This makes dmu_write_policy() and its
callers a bit more complicated.

We simplify this by making arc_write() trust the caller to supply
the type of pre-compressed buffer that it wants to write,
and override the compression setting in the zio_prop_t.

OpenZFS-issue: https://www.illumos.org/issues/8155
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b55ff58
Closes #6200
2017-06-07 14:16:01 -04:00
LOLi 3e6c943347 Linux 4.12 compat: fix super_setup_bdi_name() call
Provide a format parameter to super_setup_bdi_name() so we don't
create duplicate names in '/devices/virtual/bdi' sysfs namespace which
would prevent us from mounting more than one ZFS filesystem at a time.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6147
2017-05-25 09:55:55 -07:00
Alek P bec1067d54 Implemented zpool sync command
This addition will enable us to sync an open TXG to the main pool
on demand. The functionality is similar to 'sync(2)' but 'zpool sync'
will return when data has hit the main storage instead of potentially
just the ZIL as is the case with the 'sync(2)' cmd.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6122
2017-05-19 12:33:11 -07:00
Tony Hutter 4a283c7f77 Force fault a vdev with 'zpool offline -f'
This patch adds a '-f' option to 'zpool offline' to fault a vdev
instead of bringing it offline.  Unlike the OFFLINE state, the
FAULTED state will trigger the FMA code, allowing for things like
autoreplace and triggering the slot fault LED.  The -f faults
persist across imports, unless they were set with the temporary
(-t) flag.  Both persistent and temporary faults can be cleared
with zpool clear.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6094
2017-05-19 12:30:16 -07:00
Brian Behlendorf a9f0d7dd89 Fix large dnode send stream flag conflict
Bit 21 of the send stream flags was inadvertently used for two
different features under concurrent development.  To avoid any
future compatibility problems the large dnode flag is being
switched to bit 23 which is unused.

The large dnode feature has only been present in pre-releases of
ZoL and dnodesize defaults to legacy which is compatible with
existing OpenZFS implementations.  Users with dnodesize=auto
needing to use zfs send/recv must update ZoL on both the
source and destination systems.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6139
2017-05-18 10:02:16 -07:00
Isaac Huang 3d6da72d18 Skip spurious resilver IO on raidz vdev
On a raidz vdev, a block that does not span all child vdevs, excluding
its skip sectors if any, may not be affected by a child vdev outage or
failure. In such cases, the block does not need to be resilvered.
However, current resilver algorithm simply resilvers all blocks on a
degraded raidz vdev. Such spurious IO is not only wasteful, but also
adds the risk of overwriting good data.

This patch eliminates such spurious IOs.

Reviewed-by: Gvozden Neskovic <neskovic@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes #5316
2017-05-12 17:28:03 -07:00
Matthew Ahrens 4747a7d3d4 OpenZFS 8063 - verify that we do not attempt to access inactive txg
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

A standard practice in ZFS is to keep track of "per-txg" state. Any of
the 3 active TXG's (open, quiescing, syncing) can have different values
for this state. We should assert that we do not attempt to modify other
(inactive) TXG's.

Porting Notes:
- ASSERTV added to txg_sync_waiting() for unused variable.

OpenZFS-issue: https://www.illumos.org/issues/8063
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/01acb46
Closes #6109
2017-05-10 13:52:22 -04:00
Brian Behlendorf 2946a1a15a Linux 4.12 compat: CURRENT_TIME removed
Linux 4.9 added current_time() as the preferred interface to get
the filesystem time.  CURRENT_TIME was retired in Linux 4.12.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6114
2017-05-10 09:30:48 -07:00
LOLi a3eeab2de6 Add property overriding (-o|-x) to 'zfs receive'
This allows users to specify "-o property=value" to override and
"-x property" to exclude properties when receiving a zfs send stream.
Both native and user properties can be specified.

This is useful when using zfs send/receive for periodic
backup/replication because it lets users change properties such as
canmount, mountpoint, or compression without modifying the source.

References:
   https://www.illumos.org/issues/2745
   https://www.illumos.org/issues/3753

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #1350 
Closes #5349
2017-05-09 16:21:09 -07:00
Christian Schwarz 305bc4b370 Make createtxg and guid properties public
Document the existence of `createtxg` and `guid` native properties
in man pages and zfs command output.

One of the great features of ZFS is incremental replication of
snapshots, possibly between pools on different machines.

Shell scripts are commonly used to auomate this procedure. They have to
find the most recent common snapshot between both sides and then
perform incremental send & recv.
Currently, scripts rely on the sorting order of `zfs list`, which
defaults to `createtxg`, and the assumption that snapshot names on
either side do not change.

By making `createtxg` and `guid` part of the public ZFS interface,
scripts are enabled to use

  a) `createtxg` to determine the logical & temporal order of snapshots
     (the creation property is not an equivalent substitute since
      multiple snapshots may be created within one second)
  b) `guid` to uniquely identify a snapshot, independent of its current
      display name

This has the potential of making scripts safer and correct.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #6102
2017-05-09 15:36:53 -07:00
Chunwei Chen e624cd1959 Linux 4.12 compat: PF_FSTRANS was removed
zfsonlinux/spl@8f87971 added __spl_pf_fstrans_check for the xfs related
check, so we use them accordingly.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #6113
2017-05-09 10:38:46 -07:00
Chunwei Chen 8f87971e1f Linux 4.12 compat: PF_FSTRANS was removed
Change SPL_FSTRANS to optionally contains PF_FSTRANS. Also, add
__spl_pf_fstrans_check for the checks specifically for PF_FSTRANS.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #614
2017-05-09 10:36:54 -07:00
Gvozden Neskovic c17486b217 Add missing *_destroy/*_fini calls
The proposed debugging enhancements in zfsonlinux/spl#587
identified the following missing *_destroy/*_fini calls.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #5428
2017-05-04 19:26:28 -04:00
Richard Yao bc17f1047a Enable Linux read-ahead for a single page on ZVOLs
Linux has read-ahead logic designed to accelerate sequential workloads.
ZFS has its own read-ahead logic called zprefetch that operates on both
ZVOLs and datasets. Having two prefetchers active at the same time can
cause overprefetching, which unnecessarily reduces IOPS performance on
CoW filesystems like ZFS.

Testing shows that entirely disabling the Linux prefetch results in
a significant performance penalty for reads while commensurate benefits
are seen in random writes. It appears that read-ahead benefits are
inversely proportional to random write benefits, and so a single page
of Linux-layer read-ahead appears to offer the middle ground for both
workloads.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #5902
2017-05-04 18:00:27 -04:00
LOLi dddef7d600 More ashift improvements
This commit allow higher ashift values (up to 16) in 'zpool create'

The ashift value was previously limited to 13 (8K block) in b41c990
because the limited number of uberblocks we could fit in the
statically sized (128K) vdev label ring buffer could prevent the
ability the safely roll back a pool to recover it.

Since b02fe35 the largest uberblock size we support is 8K: this
allow us to store a minimum number of 16 uberblocks in the vdev
label, even with higher ashift values.

Additionally change 'ashift' pool property behaviour: if set it will
be used as the default hint value in subsequent vdev operations
('zpool add', 'attach' and 'replace'). A custom ashift value can still
be specified from the command line, if desired.

Finally, fix a bug in add-o_ashift.ksh caused by a missing variable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #2024 
Closes #4205 
Closes #4740 
Closes #5763
2017-05-03 09:31:05 -07:00
Olaf Faaland 9d3f7b8791 Write label 2,3 uberblocks when vdev expands
When vdev_psize increases, the location of labels 2 and 3 changes
because their location is relative to the end of the device.

The configs for labels 2 and 3 are written during the next spa_sync()
because the vdev is added to the dirty config list.  However, the
uberblock rings are not re-written in their new location, leaving the
device vulnerable to the beginning of the device being overwritten or
damaged.

This patch copies the uberblock ring from label 0 to labels 2 and 3,
in their new locations, at the next sync after vdev_psize increases.

Also, add a test zpool_expand_004_pos.ksh to confirm the uberblocks
are copied.

Reviewed-by: BearBabyLiu <liu.huang@zte.com.cn>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5108
2017-05-02 13:55:24 -07:00
LOLi e7fbeb606a Add zfs_nicebytes() to print human-readable sizes
* Add zfs_nicebytes() to print human-readable sizes

Some 'zfs', 'zpool' and 'zdb' output strings can be confusing to the
user when no units are specified. This add a new zfs_nicenum_format
"ZFS_NICENUM_BYTES" used to print bytes in their human-readable form.

Additionally, update some test cases to use machine-parsable 'zfs get'.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #2414 
Closes #3185 
Closes #3594 
Closes #6032
2017-05-02 13:43:53 -07:00
Brian Behlendorf 7dae2c81e7 Linux 4.12 compat: super_setup_bdi_name()
All filesystems were converted to dynamically allocated BDIs.  The
destruction of backing_dev_info structures is handled as part of
super block destruction.  Refactor the code to abstract away the
details of creating and destroying a BDI.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6089
2017-05-02 09:46:18 -07:00
Chunwei Chen 692e55b8fe Reinstate zvol_taskq to fix aio on zvol
Commit 37f9dac removed the zvol_taskq for processing zvol requests.
This was removed as part of switching to make_request_fn and was
motivated by a concern at the time over dispatch latency.

However, this also made all bio request synchronous, and caused
serious performance issues as the bio submitter would wait for
every bio it submitted, effectively making the IO depth 1.

This patch reinstate zvol_taskq, and to make sure overlapped I/Os
are ordered properly, we take range lock in zvol_request, and pass
it along with bio to the I/O functions zvol_{write,discard,read}.

In order to facilitate benchmarks a zvol_request_sync module
option was added to switch between sync and async request handling.
For the moment, the default behavior is synchronous but this is
likely to change pending additional testing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #5824
2017-04-26 13:54:40 -07:00
Tony Hutter d6418de057 Prebaked scripts for zpool status/iostat -c
This patch updates the "zpool status/iostat -c" commands to only run
"pre-baked" scripts from the /etc/zfs/zpool.d directory (or wherever
you install to).  The scripts can only be run from -c as an unprivileged
user (unless the ZPOOL_SCRIPTS_AS_ROOT environment var is
set by root).  This was done to encourage scripts to be written is such
a way that normal users can use them, and to be cautious.  If your
script needs to run a privileged command, consider adding the
appropriate line in /etc/sudoers.  See zpool(8) for an example of how
to do this.

The patch also allows the scripts to output custom column names.  If
the script outputs a line like:

name=value

then "name" is used for the column name, and "value" is its value.
Multiple columns can be specified by outputting multiple lines.  Column
names and values can have spaces.  If the value is empty, a dash (-) is
printed instead.

After all the "name=value" lines are read (if any), zpool will take the
next the next line of output (if any) and print it without a column
header.  After that, no more lines will be processed. This can be
useful for printing errors.

Lastly, this patch also disables the -c option with the latency and
request size histograms, since it produced awkward output and made the
code harder to maintain.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5852
2017-04-21 09:27:04 -07:00
Brian Behlendorf e550644f0c OpenZFS 5120 - zfs should allow large block/gzip/raidz boot pool (loader project)
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Don Brady <don.brady@intel.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- grub-2.02-beta2-422-gcad5cc0 includes support for large blocks.
- Commit 8aab121 allowed GZIP[1-9].
- Grub allows pools with multiple top-level vdevs.

OpenZFS-issue: https://www.illumos.org/issues/5120
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c8811bd
Closes #6007
2017-04-13 09:40:00 -07:00
Yuri Pankov dbb38f6605 OpenZFS 6865 - want zfs-tests cases for zpool labelclear command
Authored by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Updated 'zpool labelclear' and 'zdb -l' such that they attempt
  to find a vdev given solely its short name.  This behavior is
  consistent with the upstream OpenZFS code and the test cases
  depend on it.  The actual implementation differs slightly due
  to device naming conventions on Linux.
- auto_online_001_pos, auto_replace_001_pos and add-o_ashift
  test cases updated to expect failure when no label exists.
- read_efi_label() and zpool_label_disk_check() are read-only
  operations and should use O_RDONLY at open time to enforce this.
- zpool_label_disk() and zpool_relabel_disk() write the partition
  information using O_DIRECT an fsync() and page cache invalidation
  to ensure a consistent view of the device.
- dump_label() in zdb should invalidate the page cache in order
  to get the authoritative label from disk.

OpenZFS-issue: https://www.illumos.org/issues/6865
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c95076c
Closes #5981
2017-04-11 09:54:39 -07:00
Giuseppe Di Natale 42db43e982 OpenZFS 2932 - support crash dumps to raidz, etc. pools
Authored by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/2932
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/810e43b
Closes #5984
Closes #5216
2017-04-10 10:24:17 -07:00
George Wilson 3b7f360c96 OpenZFS 8023 - Panic destroying a metaslab deferred range tree
Authored by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

We don't want to dirty any data when we're in the final txgs of the pool
export logic. This change introduces checks to make sure that no data is
dirtied after a certain point. It also addresses the culprit of this
specific bug – the space map cannot be upgraded when we're in final
stages of pool export. If we encounter a space map that wants to be
upgraded in this phase, then we simply ignore the request as it will get
retried the next time we set the fragmentation metric on that metaslab.

OpenZFS-issue: https://www.illumos.org/issues/8023
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ef00f5
Closes #5991
2017-04-09 16:12:35 -07:00
Toomas Soome 8aab121821 OpenZFS 7404 - rootpool_007_neg, bootfs_006_pos and bootfs_008_neg tests fail with the loader project bits
Authored by: Toomas Soome <tsoome@me.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Marcel Telka <marcel@telka.sk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:
- Removed gzip and zle compression restriction on bootfs
  datasets.  Grub added support for these long ago.  Ay
  version of grub which understands lz4 also supports this.
- Enabled rootpool tests in runfile but skipped by default
  in setup on Linux since they modify the rootpool.
- bootfs_006_pos.ksh, striped pools are allowed as bootfs.

OpenZFS-issue: https://www.illumos.org/issues/7404
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/55a424c
Closes #5982
2017-04-07 14:18:19 -07:00
N Clark bcdb96a3e1 Additional Information for Zedlets
* Add ZPOOL pool state to zfs_post_common to
  allow differentiation between export and destroy
  by zedlets.

* Add pool name as standard export  This ensures
  pool name is exported to zedlets.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Closes #5942
2017-04-03 14:23:02 -07:00
Gvozden Neskovic 84c07adadb Remove dependency on linear ABD
Wherever possible it's best to avoid depending on a linear ABD.
Update the code accordingly in the following areas.

- vdev_raidz
- zio, zio_checksum
- zfs_fm
- change abd_alloc_for_io() to use abd_alloc()

Reviewed-by: David Quigley <david.quigley@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Closes #5668
2017-03-29 12:24:51 -07:00
LOLi ff61d1a495 Check ashift validity in 'zpool add'
df83110 added the ability to specify a custom "ashift" value from the command
line in 'zpool add' and 'zpool attach'. This commit adds additional checks to
the provided ashift to prevent invalid values from being used, which could
result in disastrous consequences for the whole pool.

Additionally provide ASHIFT_MAX and ASHIFT_MIN definitions in spa.h.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #5878
2017-03-28 17:21:11 -07:00
Matthew Ahrens 64fc776208 OpenZFS 7968 - multi-threaded spa_sync()
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Matthew Ahrens <mahrens@delphix.com>

spa_sync() iterates over all the dirty dnodes and processes each of them
by calling dnode_sync(). If there are many dirty dnodes (e.g. because we
created or removed a lot of files), the single thread of spa_sync()
calling dnode_sync() can become a bottleneck. Additionally, if many
dnodes are dirtied concurrently in open context (e.g. due to concurrent
file creation), the os_lock will experience lock contention via
dnode_setdirty().

The solution is to track dirty dnodes on a multilist_t, and for
spa_sync() to use separate threads to process each of the sublists in
the multilist.

OpenZFS-issue: https://www.illumos.org/issues/7968
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4a2a54c
Closes #5752
2017-03-20 18:36:00 -07:00
Olaf Faaland a3478c0747 Linux 4.11 compat: iops.getattr and friends
In torvalds/linux@a528d35, there are changes to the getattr family of functions,
struct kstat, and the interface of inode_operations .getattr.

The inode_operations .getattr and simple_getattr() interface changed to:

int (*getattr) (const struct path *, struct dentry *, struct kstat *,
    u32 request_mask, unsigned int query_flags)

The request_mask argument indicates which field(s) the caller intends to use.
Fields the caller has not specified via request_mask may be set in the returned
struct anyway, but their values may be approximate.

The query_flags argument indicates whether the filesystem must update
the attributes from the backing store.

Currently both fields are ignored.  It is possible that getattr-related
functions within zfs could be optimized based on the request_mask.

struct kstat includes new fields:
u32               result_mask;  /* What fields the user got */
u64               attributes;   /* See STATX_ATTR_* flags */
struct timespec   btime;        /* File creation time */

Fields attribute and btime are cleared; the result_mask reflects this.  These
appear to be optional based on simple_getattr() and vfs_getattr() within the
kernel, which take the same approach.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5875
2017-03-20 17:51:16 -07:00
Olaf Faaland 9a054d54fb Linux 4.11 compat: add linux/sched/signal.h
In Linux 4.11, torvalds/linux@2a1f062, signal handling related functions
were moved from sched.h into sched/signal.h.

Add configure checks to detect this and include the new file where
needed.

Reviewed-by: Chunwei Chen <david.chen@osnexus.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #608
2017-03-20 17:43:43 -07:00
Brian Behlendorf 1c2555ef92 Restructure mount option handling
Restructure the handling of mount options to be consistent with
upstream OpenZFS.  This required making the following changes.

- The zfs_mntopts_t was renamed vfs_t and adjusted to provide
  the minimal needed functionality.  This includes a pointer
  back to the associated zfsvfs_t.  Plus it made it possible
  to revert zfs_register_callbacks() and zfsvfs_create() back
  to their original prototypes.

- A zfs_mnt_t structure was added for the sole purpose of
  providing a structure to pass the osname and raw mount
  pointer to zfs_domount() without having to copy them.

- Mount option parsing was moved down from the zpl_* wrapper
  functions in to the zfs_* functions.  This allowed for the
  code to be simplied and it's where similar functionality
  appears on other platforms.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-10 09:51:41 -08:00
Brian Behlendorf f298b24ddf Rename zfs_* functions
Several functions were renamed when ZFS was originally ported to
Linux.  Revert the code to the original names to minimize the
delta with upstream OpenZFS.

  zfs_sb_teardown -> zfsvfs_teardown
  zfs_sb_create -> zfsvfs_create
  zfs_sb_setup -> zfsvfs_setup
  zfs_sb_free -> zfsvfs_free
  get_zfs_sb -> getzfsvfs
  zfs_sb_hold -> zfsvfs_hold
  zfs_sb_rele -> zfsvfs_rele

  zfs_sb_prune_aliases  -> zfs_prune_aliases (Linux-only)
  zfs_sb_prune -> zfs_prune (Linux only)

Align the zfs_vnops.h and zfs_vfsops.h with upstream as much
as possible.  Several prototypes were removed and those that
remain were reordered.

Move the EXPORT_SYMBOL lines to the end of the source files
for consistency with the other source files.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-10 09:51:35 -08:00
Brian Behlendorf 0037b49e83 Rename zfs_sb_t -> zfsvfs_t
The use of zfs_sb_t instead of zfsvfs_t results in unnecessary
conflicts with the upstream source.  Change all instances of
zfs_sb_t to zfsvfs_t including updating the variables names.

Whenever possible the code was updated to be consistent with
hope it appears in the upstream OpenZFS source.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2017-03-10 09:51:33 -08:00
Chunwei Chen 9b77d1c958 Fix nfs snapdir automount
The current implementation for allowing nfs to access snapdir is very buggy.
It uses a special fh for snapdirs, such that the next time nfsd does
fh_to_dentry, it actually returns the root inode inside the snapshot. So nfsd
never knows it cross a mountpoint.

The problem is that nfsd will not hold a reference on the vfsmount of the
snapshot. This cause auto unmounter to unmount the snapshot even though nfs is
still holding dentries in it.

To fix this, we return the inode for the snapdirs themselves. However, we also
trigger automount upon fh_to_dentry, and return ESTALE so nfsd will revalidate
and see the mountpoint and do crossmnt.

Because nfsd will now be aware that these are different filesystems users
must add crossmnt to their export options to access snapshot directories.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #3794
Closes #4716
Closes #5810 
Closes #5833
2017-03-08 09:26:33 -08:00
Tony Hutter 463009865f Fix harmless "BARRIER is deprecated" kernel warning on Centos 6.8
A one time warning after module load that "BARRIER is deprecated" was seen
on the heavily patched 2.6.32-642.13.1.el6.x86_64 Centos 6.8 kernel.  It seems
that kernel had both the old BARRIER and the newer FLUSH/FUA interfaces
defined.  This fixes the warning by prefering the newer FLUSH/FUA interface
if it's available.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5739 
Closes #5828
2017-03-08 09:20:21 -08:00
bunder2015 5fc73c46f9 Fix multi-line error messages in blkdev_compat.h
Fix multi-line error messages in blkdev_compat.h by changing
error-generating multi-line error messages to single line errors.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #5860
2017-03-07 09:54:55 -08:00
Brian Behlendorf 3ec3bc2167 OpenZFS 7793 - ztest fails assertion in dmu_tx_willuse_space
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

Background information: This assertion about tx_space_* verifies that we
are not dirtying more stuff than we thought we would. We “need” to know
how much we will dirty so that we can check if we should fail this
transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the
transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() —
typically less than a millisecond), we call dbuf_dirty() on the exact
blocks that will be modified. Once this happens, the temporary
accounting in tx_space_* is unnecessary, because we know exactly what
blocks are newly dirtied; we call dnode_willuse_space() to track this
more exact accounting.

The fundamental problem causing this bug is that dmu_tx_hold_*() relies
on the current state in the DMU (e.g. dn_nlevels) to predict how much
will be dirtied by this transaction, but this state can change before we
actually perform the transaction (i.e. call dbuf_dirty()).

This bug will be fixed by removing the assertion that the tx_space_*
accounting is perfectly accurate (i.e. we never dirty more than was
predicted by dmu_tx_hold_*()). By removing the requirement that this
accounting be perfectly accurate, we can also vastly simplify it, e.g.
removing most of the logic in dmu_tx_count_*().

The new tx space accounting will be very approximate, and may be more or
less than what is actually dirtied. It will still be used to determine
if this transaction will put us over quota. Transactions that are marked
by dmu_tx_mark_netfree() will be excepted from this check. We won’t make
an attempt to determine how much space will be freed by the transaction
— this was rarely accurate enough to determine if a transaction should
be permitted when we are over quota, which is why dmu_tx_mark_netfree()
was introduced in 2014.

We also won’t attempt to give “credit” when overwriting existing blocks,
if those blocks may be freed. This allows us to remove the
do_free_accounting logic in dbuf_dirty(), and associated routines. This
logic attempted to predict what will be on disk when this txg syncs, to
know if the overwritten block will be freed (i.e. exists, and has no
snapshots).

OpenZFS-issue: https://www.illumos.org/issues/7793
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a
Upstream bugs: DLPX-32883a
Closes #5804 

Porting notes:
- DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(),
  Using the default dnode size would be slightly better.
- DEBUG_DMU_TX wrappers and configure option removed.
- Resolved _by_dnode() conflicts these changes have not yet been
  applied to OpenZFS.
2017-03-07 09:51:59 -08:00