The cleanest way to do this is to set AM_LIBTOOLFLAGS = --silent. However,
AM_LIBTOOLFLAGS is not honored by automake-1.9.6-2.1 which is what I have
been using. To cleanly handle this I am updating to automake-1.11-3 which
is why it looks like there is a lot of churn in the Makefiles.
We need dependent packages to be able to include zfs_config.h to
build properly. This was partially solved previously be using
AH_BOTTOM to #undef common #defines (PACKAGE, VERSION, etc) which
autoconf always adds and cannot be easily removed. This solution
works as long as the zfs_config.h is included before your projects
config.h. That turns out to be easier said than done. In particular,
this is a problem when your package includes its config.h using the
-include gcc option which ensures the first thing included is your
config.h.
To handle all cases cleanly I have removed the AH_BOTTOM hack and
replaced it with an AC_CONFIG_HEADERS command. This command runs
immediately after zfs_config.h is written and with a little awk-foo
it strips the offending #defines from the file. This eliminates
the problem entirely and makes header safe for inclusion.
After much contemplation I can't see a clean way to use udev entirely
in-tree for testing. This patch removed a horrible horrible hack which
would copy the needed udev bits in to place on your system to make it
work. That however is simply not acceptable, nothing you in in-tree
should ever ever ever install something on your system.
Since I could not come up with a clean way to use udev in-tree. The
fix is to simply parse the zdev config file and create the needed
symlinks in a sub-diretory or your working tree. This is not as clean
as using udev but it does work perfectly well for in-tree testing.
Previously the ZFS configure was dependent on a correct Module{s}.symvers
file which is generated as one of the last steps of the full SPL build.
This meant you could not do a recursive configure because this will
configure all sub-packages before building any of them.
To resolve this issue the ZFS code has been updated to make a very
educated guess as to this file name at configure time. This means
SPL_SYMBOLS may still be used in various places in the build system
such as modules/Makefile.in. But we do give up the ability to
seemlessly detect symbols exported by the SPL at ZFS configure time.
At the moment this is not as issue, hopefully it will stay that way.
/lib/modules/$(uname -r)/source. This will likely fail when building
under a mock (http://fedoraproject.org/wiki/Projects/Mock) chroot
environment since `uname -r` will report the running kernel which
likely is not the kernel in your chroot. To cleanly handle this
we fallback to using the first kernel in your chroot.
The kernel-devel package which contains all the kernel headers and
a few build products such as Module.symver{s} is all the is required.
Full source is not needed.
Twice now I've been bitten by building agaist a kernel which is
configured such that it is incompatible with the CDDL license. These
build failures don't occur until the linking phase at which point they
simply callout the offending symbol. No location information can be
provided at this point so it often can be confusing what the problem is
particularly when building against a new kernel for the first time.
To help address this I've added a configure check which can be extended
over time to detect known kernel config options which if set will break
the ZFS build. Currently I have just added CONFIG_DEBUG_LOCK_ALLOC which
makes mutex's GPL-only and is on by default in the RHEL6 alpha builds.
I know for a fact there are other similiar options which can be added
as they are encountered.
While I completely agree the udev is the lesser of many possibles
evils when solving the device issue... it is still evil. After
attempting to craft a single rule which will work for various
versions of udev in various distros. I've come to the conclusion
the only maintainable way to solve this issue is to split the rule
from any particular configuration.
This commit provides a generic 60-zpool.rules file which use a
small helper util 'zpool_id' to parse a configuration file by
default located in /etc/zfs/zdev.conf. The helper script maps
a by-path udev name to a more friendly name of <channel><rank>
for large configurations.
As part of this change all of the support scripts why rely on
this udev naming convention have been updated as needed. Example
zdev.conf files have also been added for 3 different systems by
you will always need to add one for your exact hardware.
Finally, included in these changes are the proper tweaks to the
build system to ensure everything still get's packaged properly
in the rpms and can run in or out of tree.
To simplify creation and management of test configurations the
dragon and x4550 configureis have been integrated with udev. Our
current best guess as to how we'll actually manage the disks in
these systems is with a udev mapping scheme. The current leading
scheme is to map each drive to a simpe <CHANNEL><RANK> id. In
this mapping each CHANNEL is represented by the letters a-z, and
the RANK is represented by the numbers 1-n. A CHANNEL should
identify a group of RANKS which are all attached to a single
controller, each RANK represents a disk. This provides a nice
mechanism to locate a specific drive given a known hardware
configuration. Various hardware vendors use a similar scheme.
A nice side effect of these changes is it allowed me to make
the raid0/raid10/raidz/raidz2 setup functions generic. This
makes adding new test configs easy, you just need to create
a udev rules file for your test config which conforms to the
naming scheme.
This include updating all the Makefile.am to have the correct
include paths and libraries. In addition, the zlib m4 macro was
updated to more correctly integrate with the Makefiles. And I
added two new macros libblkid and libuuid which will be needed by
subsequent commits for blkid and uuid support respectively. The
blkid support is optional, the uuid support is mandatory for libefi.
This change extends the existing in-tree test infrastructure such
that it can also be run as part of a the installed package. This
simplifies testing on multiple systems and is generally all around
useful. The scripts may still be run in-tree and will use the
in-tree build products as long as .script-config exists.
This change extends the existing in-tree test infrastructure such
that it can also be run as part of a the installed package. This
simplifies testing on multiple systems and is generally all around
useful. The scripts may still be run in-tree and will use the
in-tree build products as long as .script-config exists.
2.6.22 API change
Unused destroy_dirty_buffers arg removed from prototype.
2.6.24 API change
Empty write barriers are now supported and we should use them.
2.6.24 API change
Size argument dropped from bio_endio and bi_end_io, because the
bi_end_io is only called once now when the request is complete.
There is no longer any need for a size argument. This also means
that partial IO's are no longer possibe and the end_io callback
should not check bi->bi_size. Finally, the return type was updated
to void.
2.6.28 API change
open/close_bdev_excl() renamed to open/close_bdev_exclusive().
2.6.29 API change
BIO_RW_SYNC renamed to BIO_RW_SYNCIO.
Modern kernel build systems at least post 2.6.16 will set this properly
so we should not. In fact post 2.6.28 the include headers have moved
under arch so the guess we make here is completely wrong. Letting
the kernel build system set this ensure it will be correct. Also
drop the ulimit from the Makefile which, not surprisingly, turns out
to be very non-portable. If your expecting failures set the ulimit
in your shell before kicking off the test suite.
when used to generate source rpms. These should not be fatal
because we actually don't need them until we build the source
rpm. When doing mock build this is important because these
dependent rpms will only be installed if they are specificed
in the source rpms spec file.
These changes bring the zfs-0.4.4 tree in to compliance with
the spl-0.4.4 packaging changes. The bottom line is 2 source
rpms and 4 binary rpms will now be generated when creating
packages there will be:
zfs-<version>.src.rpm
- Fully rebuildable source rpm for libzfs and utils.
zfs-modules-<version>.src.rpm
- Fully rebuildable source rpm for kernel modules.
zfs-<version>.<arch>.rpm
- Binary rpm for libzfs and utils. The utils in this package are
compatible with all zfs-module rpms of the same version.
zfs-devel-<version>.<arch>.rpm
- Binary rpm containing headers for building against libzfs libraries.
zfs-modules-<verion>-<kernel>.arch.rpm
- Binary rpm containing the kernel modules for a specific kernel build.
The package name contains the kernel version and you should have one
of these packages installed to match every kernel on your system.
zfs-modules-devel-<verion>-<kernel>.arch.rpm
- Binary rpm containing development header and module symbols needed
for building additional kernel modules which are dependent on the
zfs module stack.
Expect minor interations on these changes as I validate they work
properly on CHAOS, RHEL, Fedora, and SLES style distros.
- ZFS_AC_KERNEL updated to exclude -obj entries in /usr/src/ when
attempting to automatically detect your kernel source.
- ZFS_AC_KERNEL check for *-obj directory when attempting to
detect the objects for your kernel source.
- ZFS_AC_SPL updated to additionally check for Modules.symvers build
product. This seems to be specific to SLES system, for Vanilla,
Fedora, RHEL, and Chaos kernels the symbol file is just called
Module.symvers.
- ZFS_CHECK_SYMBOL_EXPORT also should also check the exported SPL
symbols in addition to the exported core kernel systems.
Brian Behlendorf
Brian J. Murrell