Commit Graph

2830 Commits

Author SHA1 Message Date
Tom Caputi 61152d1069 Fix errata #4 handling for resuming streams
Currently, the handling for errata #4 has two issues which allow
the checks for this issue to be bypassed using resumable sends.
The first issue is that drc->drc_fromsnapobj is not set in the
resuming code as it is in the non-resuming code. This causes
dsl_crypto_recv_key_check() to skip its checks for the
from_ivset_guid. The second issue is that resumable sends do not
clean up their on-disk state if they fail the checks in
dmu_recv_stream() that happen before any data is received.

As a result of these two bugs, a user can attempt a resumable send
of a dataset without a from_ivset_guid. This will fail the initial
dmu_recv_stream() checks, leaving a valid resume state. The send
can then be resumed, which skips those checks, allowing the receive
to be completed.

This commit fixes these issues by setting drc->drc_fromsnapobj in
the resuming receive path and by ensuring that resumablereceives
are properly cleaned up if they fail the initial dmu_recv_stream()
checks.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #9818 
Closes #9829
2020-01-14 12:25:20 -08:00
loli10K 7e2da7786e KMC_KVMEM disrupts kv_alloc() memory alignment expectations
On kernels with KASAN enabled the following failure can be observed as
soon as the zfs module is loaded:

  VERIFY(IS_P2ALIGNED(ptr, PAGE_SIZE)) failed
  PANIC at spl-kmem-cache.c:228:kv_alloc()

The problem is kmalloc() has never guaranteed aligned allocations; this
requirement resulted in zfsonlinux/spl@8b45dda which removed all
kmalloc() usage in kv_alloc().

Until a GFP_ALIGNED flag (or equivalent functionality) is provided by
the kernel this commit partially reverts 66955885 and 6d948c35 to
prevent k(v)malloc() allocations in kv_alloc().

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #9813
2020-01-14 09:09:59 -08:00
Brian Behlendorf e458fcca75
Change http://zfsonlinux.org links to https://zfsonlinux.org
Update the project website links contained in to repository to
reference the secure https://zfsonlinux.org address.

Reviewed-By: Richard Laager <rlaager@wiktel.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Garrett Fields <ghfields@gmail.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9837
2020-01-13 16:43:59 -08:00
Tom Caputi ba0ba69e50 Add 'zfs send --saved' flag
This commit adds the --saved (-S) to the 'zfs send' command.
This flag allows a user to send a partially received dataset,
which can be useful when migrating a backup server to new
hardware. This flag is compatible with resumable receives, so
even if the saved send is interrupted, it can be resumed.
The flag does not require any user / kernel ABI changes or any
new feature flags in the send stream format.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Reviewed-by: Christian Schwarz <me@cschwarz.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #9007
2020-01-10 10:16:58 -08:00
loli10K c24fa4b19a Fix "zpool add -n" for dedup, special and log devices
For dedup, special and log devices "zpool add -n" does not print
correctly their vdev type:

~# zpool add -n pool dedup /tmp/dedup special /tmp/special log /tmp/log
would update 'pool' to the following configuration:
	pool
	  /tmp/normal
	  /tmp/dedup
	  /tmp/special
	  /tmp/log

This could lead storage administrators to modify their ZFS pools to
unexpected and unintended vdev configurations.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #9783 
Closes #9390
2020-01-06 15:40:06 -08:00
Brian Behlendorf bc9cef11fd
Fix QAT allocation failure return value
When qat_compress() fails to allocate the required contiguous memory
it mistakenly returns success.  This prevents the fallback software
compression from taking over and (un)compressing the block.

Resolve the issue by correctly setting the local 'status' variable
on all exit paths.  Furthermore, initialize it to CPA_STATUS_FAIL
to ensure qat_compress() always fails safe to guard against any
similar bugs in the future.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9784
Closes #9788
2020-01-06 11:17:53 -08:00
Brian Behlendorf cc618d179e
Static symbols exported by ICP
The crypto_cipher_init_prov and crypto_cipher_init are declared static
and should not be exported by the ICP.  This resolves the following
warnings observed when building with the 5.4 kernel.

WARNING: "crypto_cipher_init" [.../icp] is a static EXPORT_SYMBOL
WARNING: "crypto_cipher_init_prov" [.../icp] is a static EXPORT_SYMBOL

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9791
2020-01-02 18:08:45 -08:00
Steve Mokris d5c97f3de7 Avoid some crashes when importing a pool with corrupt metadata
- Skip invalid DVAs when importing pools in readonly mode
  (in addition to when the config is untrusted).

- Upon encountering a DVA with a null VDEV, fail gracefully
  instead of panicking with a NULL pointer dereference.

Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Steve Mokris <smokris@softpixel.com>
Closes #9022
2019-12-26 10:57:05 -08:00
Brian Behlendorf 635a01aafd
Cancel initialize and TRIM before vdev_metaslab_fini()
Any running 'zpool initialize' or TRIM must be cancelled prior
to the vdev_metaslab_fini() call in spa_vdev_remove_log() which
will unload the metaslabs and set ms->ms_group == NULL.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8602
Closes #9751
2019-12-26 10:50:23 -08:00
Brian Behlendorf d16a207f2e cppcheck: (warning) Possible null pointer dereference: nvh
Move the 'nvh = (void *)buf' assignment after the 'buf == NULL'
check to resolve the warning.  Interestingly, cppcheck 1.88
correctly determines that the existing code is safe, while
cppcheck 1.86 reports the warning.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:25:57 -08:00
Brian Behlendorf 487bddad67 cppcheck: (error) Address of local auto-variable assigned
Suppress autoVariables warnings in the lua interpreter.  The usage
here while unconventional in intentional and the same as upstream.

[module/lua/ldebug.c:327]: (error) Address of local auto-variable
    assigned to a function parameter.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:25:42 -08:00
Brian Behlendorf 070402f112 cppcheck: (warning) Possible null pointer dereference: dnp
The dnp argument can only be set to NULL when the DNODE_DRY_RUN flag
is set.  In which case, an early return path will be executed and a
NULL pointer dereference at the given location is impossible.  Add
an additional ASSERT to silence the cppcheck warning and document
that dbp must never be NULL at the point in the function.

[module/zfs/dnode.c:1566]: (warning) Possible null pointer deref: dnp

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:25:13 -08:00
Ubuntu abfdb83607 cppcheck: (error) Shifting signed 64-bit value by 63 bits
As of cppcheck 1.82 surpress the warning regarding shifting too many
bits for __divdi3() implemention.  The algorithm used here is correct.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:24:42 -08:00
Ubuntu 7cf1fe6331 cppcheck: (error) Uninitialized variable
As of cppcheck 1.82 warnings are issued when using the list_for_each_*
functions with an uninitialized variable.  Functionally, this is fine
but to resolve the warning initialize these variables.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:24:29 -08:00
Ubuntu 5215fdd43c cppcheck: (error) Uninitialized variable
Resolve the following uninitialized variable warnings.  In practice
these were unreachable due to the goto.  Replacing the goto with a
return resolves the warning and yields more readable code.

[module/icp/algs/modes/ccm.c:892]: (error) Uninitialized variable: ccm_param
[module/icp/algs/modes/ccm.c:893]: (error) Uninitialized variable: ccm_param
[module/icp/algs/modes/gcm.c:564]: (error) Uninitialized variable: gcm_param
[module/icp/algs/modes/gcm.c:565]: (error) Uninitialized variable: gcm_param
[module/icp/algs/modes/gcm.c:599]: (error) Uninitialized variable: gmac_param
[module/icp/algs/modes/gcm.c:600]: (error) Uninitialized variable: gmac_param

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9732
2019-12-18 17:23:54 -08:00
Romain Dolbeau 118fc3ef07 Minor performance fix for NEON RAID-Z
The NEON code replicates too closely the SSE code, including
a masked 16-bits shift. But NEON, like AltiVec (#9539), has
unsigned 8-bits shift, so use that instead and drop the masking.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Romain Dolbeau <romain.dolbeau@european-processor-initiative.eu>
Closes #9725
2019-12-17 19:34:52 -08:00
Matthew Macy ba434b18ec Fix zfs_xattr_owner_unlinked on FreeBSD and comment
Explain FreeBSD VFS' unfortunate idiosyncratic locking requirements.
There is no functional change for other platforms.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9720
2019-12-16 09:49:05 -08:00
Tomohiro Kusumi ddb4e69db5 Don't fail to apply umask for O_TMPFILE files
Apply umask to `mode` which will eventually be applied to inode.
This is needed since VFS doesn't apply umask for O_TMPFILE files.

(Note that zpl_init_acl() applies `ip->i_mode &= ~current_umask();`
only when POSIX ACL is used.)

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes #8997 
Closes #8998
2019-12-13 15:02:23 -08:00
Tom Caputi c317c8c811 Allow empty ds_props_obj to be destroyed
Currently, 'zfs list' and 'zfs get' commands can be slow when
working with snapshots that have a ds_props_obj. This is
because the code that discovers all of the properties for these
snapshots needs to read this object for each snapshot, which
almost always ends up causing an extra random synchronous read
for each snapshot. This performance penalty exists even if the
properties on that snapshot have been unset because the object
is normally only freed when the snapshot is freed, even though
it is only created when it is needed.

This patch allows the user to regain 'zfs list' performance on
these snapshots by destroying the ds_props_obj when it no longer
has any entries left. In practice on a production machine, this
optimization seems to make 'zfs list' about 55% faster.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #9704
2019-12-13 11:51:39 -08:00
Matthew Macy 13a9a6f5e8 Make zfs_replay.c work on FreeBSD
FreeBSD's vfs currently doesn't permit file systems
to do their own locking. To avoid having to have
duplicate zfs functions with and without locking add
locking here. With luck these changes can be removed
in the future.

Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9715
2019-12-13 07:54:10 -08:00
Matthew Ahrens 9bb0d89c5c Fix use-after-free of vd_path in spa_vdev_remove()
After spa_vdev_remove_aux() is called, the config nvlist is no longer
valid, as it's been replaced by the new one (with the specified device
removed).  Therefore any pointers into the nvlist are no longer valid.
So we can't save the result of
`fnvlist_lookup_string(nv, ZPOOL_CONFIG_PATH)` (in vd_path) across the
call to spa_vdev_remove_aux().

Instead, use spa_strdup() to save a copy of the string before calling
spa_vdev_remove_aux.

Found by AddressSanitizer:

ERROR: AddressSanitizer: heap-use-after-free on address ...
READ of size 34 at 0x608000a1fcd0 thread T686
    #0 0x7fe88b0c166d  (/usr/lib/x86_64-linux-gnu/libasan.so.4+0x5166d)
    #1 0x7fe88a5acd6e in spa_strdup spa_misc.c:1447
    #2 0x7fe88a688034 in spa_vdev_remove vdev_removal.c:2259
    #3 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229
    #4 0x55ffbc769fba in ztest_execute ztest.c:6714
    #5 0x55ffbc779a90 in ztest_thread ztest.c:6761
    #6 0x7fe889cbc6da in start_thread
    #7 0x7fe8899e588e in __clone

0x608000a1fcd0 is located 48 bytes inside of 88-byte region
freed by thread T686 here:
    #0 0x7fe88b14e7b8 in __interceptor_free
    #1 0x7fe88ae541c5 in nvlist_free nvpair.c:874
    #2 0x7fe88ae543ba in nvpair_free nvpair.c:844
    #3 0x7fe88ae57400 in nvlist_remove_nvpair nvpair.c:978
    #4 0x7fe88a683c81 in spa_vdev_remove_aux vdev_removal.c:185
    #5 0x7fe88a68857c in spa_vdev_remove vdev_removal.c:2221
    #6 0x55ffbc7748f8 in ztest_vdev_aux_add_remove ztest.c:3229
    #7 0x55ffbc769fba in ztest_execute ztest.c:6714
    #8 0x55ffbc779a90 in ztest_thread ztest.c:6761
    #9 0x7fe889cbc6da in start_thread

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #9706
2019-12-11 15:38:21 -08:00
Ryan Moeller 957c7aa23c Relocate common quota functions to shared code
The quota functions are common to all implementations and can be
moved to common code.  As a simplification they were moved to the
Linux platform code in the initial refactoring.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9710
2019-12-11 12:12:08 -08:00
Matthew Macy 4bc721965f Add FreeBSD jail support hooks
Add the 'zfs jail/unjail' subcommands along with the relevant 
documentation from FreeBSD.  This feature is not supported on
Linux and still requires the match kernel ioctls which will
be included when the FreeBSD platform code is integrated.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9686
2019-12-11 11:58:37 -08:00
Matthew Macy 657ce25357 Eliminate Linux specific inode usage from common code
Change many of the znops routines to take a znode rather
than an inode so that zfs_replay code can be largely shared
and in the future the much of the znops code may be shared.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9708
2019-12-11 11:53:57 -08:00
Paul Zuchowski f0bf435176 zio_decompress_data always ASSERTs successful decompression
This interferes with zdb_read_block trying all the decompression
algorithms when the 'd' flag is specified, as some are
expected to fail.  Also control the output when guessing
algorithms, try the more common compression types first, allow
specifying lsize/psize, and fix an uninitialized variable.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #9612 
Closes #9630
2019-12-10 15:51:58 -08:00
Matthew Macy 362ae8d11f Abstract away platform specific superblock references
The zfsvfs->z_sb field is Linux specified and should be abstracted.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9697
2019-12-10 09:21:07 -08:00
Matthew Macy 3c502d3b75 Exclude data from cores unconditionally and metadata conditionally
This change allows us to align the code dump logic across platforms.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9691
2019-12-09 12:29:56 -08:00
Matthew Macy ea79e90f99 Mark dsl_dataset_deactivate_feature_impl static
The dsl_dataset_deactivate_feature_impl() function is private and
should be marked as such.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9696
2019-12-09 12:26:33 -08:00
Brian Behlendorf a25861dcae
ZTS: Fix zpool_reopen_001_pos
Update the vdev_disk_open() retry logic to use a specified number
of milliseconds to be more robust.  Additionally, on failure log
both the time waited and requested timeout to the internal log.

The default maximum allowed open retry time has been increased
from 500ms to 1000ms.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9680
2019-12-09 11:09:14 -08:00
Matthew Macy 0dcef9b966 Disable sysfs feature checks on FreeBSD
The sysfs infrastructure for reporting supported features and
properties is Linux specific.  Disable it on FreeBSD until it can
be extended to be more portable.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9684
2019-12-06 09:44:29 -08:00
Attila Fülöp 3ac34ca375 ICP: Fix out of bounds write
If gcm_mode_encrypt_contiguous_blocks() is called more than once
in succession, with the accumulated lengths being less than
blocksize, ctx->copy_to will be incorrectly advanced. Later, if
out is NULL, the bcopy at line 114 will overflow
ctx->gcm_copy_to since ctx->gcm_remainder_len is larger than the
ctx->gcm_copy_to buffer can hold.

The fix is to set ctx->copy_to only if it's not already set.

For ZoL the issue may be academic, since in all my testing I wasn't
able to hit neither of both conditions needed to trigger it, but
other consumers can easily do so.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #9660
2019-12-06 09:36:19 -08:00
Matthew Macy f95704ca5e Disable EDONR on FreeBSD
FreeBSD uses its own crypto framework in-kernel which, at this time,
has no EDONR implementation.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@ixsystems.com>
Closes #9664
2019-12-05 13:10:29 -08:00
Matthew Macy e64e84eca5 Refactor deadman set failmode to be cross platform
Update zfs_deadman_failmode to use the ZFS_MODULE_PARAM_CALL
wrapper, and split the common and platform specific portions.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9670
2019-12-05 12:40:45 -08:00
Matthew Macy 2a8ba608d3 Replace ASSERTV macro with compiler annotation
Remove the ASSERTV macro and handle suppressing unused 
compiler warnings for variables only in ASSERTs using the 
__attribute__((unused)) compiler annotation.  The annotation
is understood by both gcc and clang.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9671
2019-12-05 12:37:00 -08:00
Attila Fülöp 54c8366e39 ICP: Fix null pointer dereference and use after free
In gcm_mode_decrypt_contiguous_blocks(), if vmem_alloc() fails,
bcopy is called with a NULL pointer destination and a length > 0.
This results in undefined behavior. Further ctx->gcm_pt_buf is
freed but not set to NULL, leading to a potential write after
free and a double free due to missing return value handling in
crypto_update_uio(). The code as is may write to ctx->gcm_pt_buf
in gcm_decrypt_final() and may free ctx->gcm_pt_buf again in
aes_decrypt_atomic().

The fix is to slightly rework error handling and check the return
value in crypto_update_uio().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #9659
2019-12-03 10:28:47 -08:00
Alexander Motin 5ff2249fa5 Fix use-after-free in case of L2ARC prefetch failure
In case L2ARC read failed, l2arc_read_done() creates _different_ ZIO
to read data from the original storage device.  Unfortunately pointer
to the failed ZIO remains in hdr->b_l1hdr.b_acb->acb_zio_head, and if
some other read try to bump the ZIO priority, it will crash.

The problem is reproducible by corrupting L2ARC content and reading
some data with prefetch if l2arc_noprefetch tunable is changed to 0.
With the default setting the issue is probably not reproducible now.

Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #9648
2019-12-03 09:59:30 -08:00
Brian Behlendorf 624222ae31
Increase allowed 'special_small_blocks' maximum value
There may be circumstances where it's desirable that all blocks
in a specified dataset be stored on the special device.  Relax
the artificial 128K limit and allow the special_small_blocks
property to be set up to 1M.  When blocks >1MB have been enabled
via the zfs_max_recordsize module option, this limit is increased
accordingly.

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9131
Closes #9355
2019-12-03 09:58:03 -08:00
Matthew Macy b3673342c7 Wrap module_param_call() routines under __linux__
The module_param_call() functionality is currently still
Linux-specific and should be wrapped accordingly.

Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9666
2019-12-03 09:56:15 -08:00
Matthew Macy bff8fb395b Mark write_record static
The write_record() function is private and should be marked as such.

Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9665
2019-12-03 09:51:44 -08:00
Matthew Macy 74d1d74959 Move linux qsort def to platform header
Moving qsort to the platform header allows each platform to
provide an appropriate sorting implementation.

Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9663
2019-12-03 09:49:40 -08:00
Michael Niewöhner e69bb31b71 Adapt gitignore for modules
Remove the specific gitignore rules for module left-overs and add a
generic one in modules/.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Closes #9656
2019-12-02 13:23:47 -08:00
Matthew Macy 5142032106 Move zfs_cmd_t copyin/copyout to platform code
FreeBSD needs to cope with multiple version of the zfs_cmd_t
structure. Allowing the platform code to pre and post
process the cmd structure makes it possible to work with
legacy tooling.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9624
2019-12-02 10:08:27 -08:00
Matthew Macy 758699b6f1 Restructure nvlist_nv_alloc to work on FreeBSD
KM_PUSHPAGE is an Illumosism - On FreeBSD it's
aliased to the same malloc flag as KM_SLEEP.
The compiler naturally rejects multiple case
statements with the same value.  This is effectively
a no-op since all callers pass a specific KM_* flag.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9643
2019-11-30 15:45:06 -08:00
Matthew Macy f348c78f97 Mark Linux fallocate extensions as specific to Linux
fallocate(2) is a Linux-specific system call which in unavailable
on other platforms.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9633
2019-11-30 15:40:22 -08:00
Matthew Macy a5b762ab1d Resolve ZoF differences in zfs_ioctl.h
FreeBSD needs to be able to pass the jail id to the jail/unjail ioctls
and the struct file in the device structure is unused.

Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9625
2019-11-30 15:35:54 -08:00
Brian Behlendorf 9e17e6f254
Remove zfs_vdev_elevator module option
As described in commit f81d5ef6 the zfs_vdev_elevator module
option is being removed.  Users who require this functionality
should update their systems to set the disk scheduler using a
udev rule.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #8664
Closes #9417
Closes #9609
2019-11-27 10:35:49 -08:00
jwpoduska 3c819a2c7d Prevent unnecessary resilver restarts
If a device is participating in an active resilver, then it will have a
non-empty DTL. Operations like vdev_{open,reopen,probe}() can cause the
resilver to be restarted (or deferred to be restarted later), which is
unnecessary if the DTL is still covered by the current scan range. This
is similar to the logic in vdev_dtl_should_excise() where the DTL can
only be excised if it's max txg is in the resilvered range.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl>
Signed-off-by: John Poduska <jpoduska@datto.com>
Issue #840 
Closes #9155
Closes #9378
Closes #9551
Closes #9588
2019-11-27 10:15:01 -08:00
Mauricio Faria de Oliveira 0c46813805 Check for unlinked znodes after igrab()
The changes in commit 41e1aa2a / PR #9583 introduced a regression on
tmpfile_001_pos: fsetxattr() on a O_TMPFILE file descriptor started
to fail with errno ENODATA:

    openat(AT_FDCWD, "/test", O_RDWR|O_TMPFILE, 0666) = 3
    <...>
    fsetxattr(3, "user.test", <...>, 64, 0) = -1 ENODATA

The originally proposed change on PR #9583 is not susceptible to it,
so just move the code/if-checks around back in that way, to fix it.

Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Original-patch-by: Heitor Alves de Siqueira <halves@canonical.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Closes #9602
2019-11-21 12:24:03 -08:00
Matthew Macy da92d5cbb3 Add zfs_file_* interface, remove vnodes
Provide a common zfs_file_* interface which can be implemented on all 
platforms to perform normal file access from either the kernel module
or the libzpool library.

This allows all non-portable vnode_t usage in the common code to be 
replaced by the new portable zfs_file_t.  The associated vnode and
kobj compatibility functions, types, and macros have been removed
from the SPL.  Moving forward, vnodes should only be used in platform
specific code when provided by the native operating system.

Reviewed-by: Sean Eric Fagan <sef@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Matt Macy <mmacy@FreeBSD.org>
Closes #9556
2019-11-21 09:32:57 -08:00
Brian Behlendorf 7ae3f8dc8f
Partially revert 5a6ac4c
Reinstate the zpl_revalidate() functionality to resolve a regression
where dentries for open files during a rollback are not invalidated.

The unrelated functionality for automatically unmounting .zfs/snapshots
was not reverted.  Nor was the addition of shrink_dcache_sb() to the
zfs_resume_fs() function.

This issue was not immediately caught by the CI because the test case
intended to catch it was included in the list of ZTS tests which may
occasionally fail for unrelated reasons.  Remove all of the rollback
tests from this list to help identify the frequency of any spurious
failures.

The rollback_003_pos.ksh test case exposes a real issue with the
long standing code which needs to be investigated.  Regardless,
it has been enable with a small workaround in the test case itself.

Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #9587
Closes #9592
2019-11-18 13:05:56 -08:00