Commit Graph

132 Commits

Author SHA1 Message Date
Tom Caputi 80a91e7469 Defer new resilvers until the current one ends
Currently, if a resilver is triggered for any reason while an
existing one is running, zfs will immediately restart the existing
resilver from the beginning to include the new drive. This causes
problems for system administrators when a drive fails while another
is already resilvering. In this case, the optimal thing to do to
reduce risk of data loss is to wait for the current resilver to end
before immediately replacing the second failed drive, which allows
the system to operate with two incomplete drives for the minimum
amount of time.

This patch introduces the resilver_defer feature that essentially
does this for the admin without forcing them to wait and monitor
the resilver manually. The change requires an on-disk feature
since we must mark drives that are part of a deferred resilver in
the vdev config to ensure that we do not assume they are done
resilvering when an existing resilver completes.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: @mmaybee 
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7732
2018-10-18 21:06:18 -07:00
Don Brady cc99f275a2 Pool allocation classes
Allocation Classes add the ability to have allocation classes in a
pool that are dedicated to serving specific block categories, such
as DDT data, metadata, and small file blocks. A pool can opt-in to
this feature by adding a 'special' or 'dedup' top-level VDEV.

Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Reviewed-by: Andreas Dilger <andreas.dilger@chamcloud.com>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Gregor Kopka <gregor@kopka.net>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #5182
2018-09-05 18:33:36 -07:00
Don Brady b83a0e2dc1 Add basic zfs ioc input nvpair validation
We want newer versions of libzfs_core to run against an existing
zfs kernel module (i.e. a deferred reboot or module reload after
an update).

Programmatically document, via a zfs_ioc_key_t, the valid arguments 
for the ioc commands that rely on nvpair input arguments (i.e. non 
legacy commands from libzfs_core). Automatically verify the expected 
pairs before dispatching a command.

This initial phase focuses on the non-legacy ioctls. A follow-on 
change can address the legacy ioctl input from the zfs_cmd_t.

The zfs_ioc_key_t for zfs_keys_channel_program looks like:

static const zfs_ioc_key_t zfs_keys_channel_program[] = {
       {"program",     DATA_TYPE_STRING,               0},
       {"arg",         DATA_TYPE_UNKNOWN,              0},
       {"sync",        DATA_TYPE_BOOLEAN_VALUE,        ZK_OPTIONAL},
       {"instrlimit",  DATA_TYPE_UINT64,               ZK_OPTIONAL},
       {"memlimit",    DATA_TYPE_UINT64,               ZK_OPTIONAL},
};

Introduce four input errors to identify specific input failures
(in addition to generic argument value errors like EINVAL, ERANGE, 
EBADF, and E2BIG).

ZFS_ERR_IOC_CMD_UNAVAIL the ioctl number is not supported by kernel
ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7780
2018-09-02 12:14:01 -07:00
Serapheim Dimitropoulos a448a2557e Introduce read/write kstats per dataset
The following patch introduces a few statistics on reads and writes
grouped by dataset. These statistics are implemented as kstats
(backed by aggregate sums for performance) and can be retrieved by
using the dataset objset ID number. The motivation for this change is
to provide some preliminary analytics on dataset usage/performance.

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #7705
2018-08-20 09:52:37 -07:00
Chunwei Chen edf60b8645 Enforce PROP_ONETIME on zpool properties
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #7661
2018-06-28 14:49:17 -07:00
Serapheim Dimitropoulos d2734cce68 OpenZFS 9166 - zfs storage pool checkpoint
Details about the motivation of this feature and its usage can
be found in this blogpost:

    https://sdimitro.github.io/post/zpool-checkpoint/

A lightning talk of this feature can be found here:
https://www.youtube.com/watch?v=fPQA8K40jAM

Implementation details can be found in big block comment of
spa_checkpoint.c

Side-changes that are relevant to this commit but not explained
elsewhere:

* renames members of "struct metaslab trees to be shorter without
  losing meaning

* space_map_{alloc,truncate}() accept a block size as a
  parameter. The reason is that in the current state all space
  maps that we allocate through the DMU use a global tunable
  (space_map_blksz) which defauls to 4KB. This is ok for metaslab
  space maps in terms of bandwirdth since they are scattered all
  over the disk. But for other space maps this default is probably
  not what we want. Examples are device removal's vdev_obsolete_sm
  or vdev_chedkpoint_sm from this review. Both of these have a
  1:1 relationship with each vdev and could benefit from a bigger
  block size.

Porting notes:

* The part of dsl_scan_sync() which handles async destroys has
  been moved into the new dsl_process_async_destroys() function.

* Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write
  to block device backed pools.

* ZTS:
  * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg".

  * Don't use large dd block sizes on /dev/urandom under Linux in
    checkpoint_capacity.

  * Adopt Delphix-OS's setting of 4 (spa_asize_inflation =
    SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed
    its attempts to fill the pool

  * Create the base and nested pools with sync=disabled to speed up
    the "setup" phase.

  * Clear labels in test pool between checkpoint tests to avoid
    duplicate pool issues.

  * The import_rewind_device_replaced test has been marked as "known
    to fail" for the reasons listed in its DISCLAIMER.

  * New module parameters:

      zfs_spa_discard_memory_limit,
      zfs_remove_max_bytes_pause (not documented - debugging only)
      vdev_max_ms_count (formerly metaslabs_per_vdev)
      vdev_min_ms_count

Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9166
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8
Closes #7570
2018-06-26 10:07:42 -07:00
Pavel Zakharov 8a393be353 OpenZFS 9235 - rename zpool_rewind_policy_t to zpool_load_policy_t
We want to be able to pass various settings during import/open of a
pool, which are not only related to rewind. Instead of adding a new
policy and duplicate a bunch of code, we should just rename
rewind_policy to a more generic term like load_policy.

For instance, we'd like to set spa->spa_import_flags from the nvlist,
rather from a flags parameter passed to spa_import as in some cases we
want those flags not only for the import case, but also for the open
case. One such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb)
which would allow zfs to open a pool when logs are missing.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://illumos.org/issues/9235
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d2b1e44
Closes #7532
2018-06-04 14:54:20 -07:00
Pavel Zakharov 6cb8e5306d OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recovery
Some work has been done lately to improve the debugability of the ZFS pool
load (and import) process. This includes:

	7638 Refactor spa_load_impl into several functions
	8961 SPA load/import should tell us why it failed
	7277 zdb should be able to print zfs_dbgmsg's

To iterate on top of that, there's a few changes that were made to make the
import process more resilient and crash free. One of the first tasks during the
pool load process is to parse a config provided from userland that describes
what devices the pool is composed of. A vdev tree is generated from that config,
and then all the vdevs are opened.

The Meta Object Set (MOS) of the pool is accessed, and several metadata objects
that are necessary to load the pool are read. The exact configuration of the
pool is also stored inside the MOS. Since the configuration provided from
userland is external and might not accurately describe the vdev tree
of the pool at the txg that is being loaded, it cannot be relied upon to safely
operate the pool. For that reason, the configuration in the MOS is read early
on. In the past, the two configurations were compared together and if there was
a mismatch then the load process was aborted and an error was returned.

The latter was a good way to ensure a pool does not get corrupted, however it
made the pool load process needlessly fragile in cases where the vdev
configuration changed or the userland configuration was outdated. Since the MOS
is stored in 3 copies, the configuration provided by userland doesn't have to be
perfect in order to read its contents. Hence, a new approach has been adopted:
The pool is first opened with the untrusted userland configuration just so that
the real configuration can be read from the MOS. The trusted MOS configuration
is then used to generate a new vdev tree and the pool is re-opened.

When the pool is opened with an untrusted configuration, writes are disabled
to avoid accidentally damaging it. During reads, some sanity checks are
performed on block pointers to see if each DVA points to a known vdev;
when the configuration is untrusted, instead of panicking the system if those
checks fail we simply avoid issuing reads to the invalid DVAs.

This new two-step pool load process now allows rewinding pools accross
vdev tree changes such as device replacement, addition, etc. Loading a pool
from an external config file in a clustering environment also becomes much
safer now since the pool will import even if the config is outdated and didn't,
for instance, register a recent device addition.

With this code in place, it became relatively easy to implement a
long-sought-after feature: the ability to import a pool with missing top level
(i.e. non-redundant) devices. Note that since this almost guarantees some loss
of data, this feature is for now restricted to a read-only import.

Porting notes (ZTS):
* Fix 'make dist' target in zpool_import

* The maximum path length allowed by tar is 99 characters.  Several
  of the new test cases exceeded this limit resulting in them not
  being included in the tarball.  Shorten the names slightly.

* Set/get tunables using accessor functions.

* Get last synced txg via the "zfs_txg_history" mechanism.

* Clear zinject handlers in cleanup for import_cache_device_replaced
  and import_rewind_device_replaced in order that the zpool can be
  exported if there is an error.

* Increase FILESIZE to 8G in zfs-test.sh to allow for a larger
  ext4 file system to be created on ZFS_DISK2.  Also, there's
  no need to partition ZFS_DISK2 at all.  The partitioning had
  already been disabled for multipath devices.  Among other things,
  the partitioning steals some space from the ext4 file system,
  makes it difficult to accurately calculate the paramters to
  parted and can make some of the tests fail.

* Increase FS_SIZE and FILE_SIZE in the zpool_import test
  configuration now that FILESIZE is larger.

* Write more data in order that device evacuation take lonnger in
  a couple tests.

* Use mkdir -p to avoid errors when the directory already exists.

* Remove use of sudo in import_rewind_config_changed.

Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9075
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123
Closes #7459
2018-05-08 21:35:27 -07:00
Matthew Ahrens a1d477c24c OpenZFS 7614, 9064 - zfs device evacuation/removal
OpenZFS 7614 - zfs device evacuation/removal
OpenZFS 9064 - remove_mirror should wait for device removal to complete

This project allows top-level vdevs to be removed from the storage pool
with "zpool remove", reducing the total amount of storage in the pool.
This operation copies all allocated regions of the device to be removed
onto other devices, recording the mapping from old to new location.
After the removal is complete, read and free operations to the removed
(now "indirect") vdev must be remapped and performed at the new location
on disk.  The indirect mapping table is kept in memory whenever the pool
is loaded, so there is minimal performance overhead when doing operations
on the indirect vdev.

The size of the in-memory mapping table will be reduced when its entries
become "obsolete" because they are no longer used by any block pointers
in the pool.  An entry becomes obsolete when all the blocks that use
it are freed.  An entry can also become obsolete when all the snapshots
that reference it are deleted, and the block pointers that reference it
have been "remapped" in all filesystems/zvols (and clones).  Whenever an
indirect block is written, all the block pointers in it will be "remapped"
to their new (concrete) locations if possible.  This process can be
accelerated by using the "zfs remap" command to proactively rewrite all
indirect blocks that reference indirect (removed) vdevs.

Note that when a device is removed, we do not verify the checksum of
the data that is copied.  This makes the process much faster, but if it
were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be
possible to copy the wrong data, when we have the correct data on e.g.
the other side of the mirror.

At the moment, only mirrors and simple top-level vdevs can be removed
and no removal is allowed if any of the top-level vdevs are raidz.

Porting Notes:

* Avoid zero-sized kmem_alloc() in vdev_compact_children().

    The device evacuation code adds a dependency that
    vdev_compact_children() be able to properly empty the vdev_child
    array by setting it to NULL and zeroing vdev_children.  Under Linux,
    kmem_alloc() and related functions return a sentinel pointer rather
    than NULL for zero-sized allocations.

* Remove comment regarding "mpt" driver where zfs_remove_max_segment
  is initialized to SPA_MAXBLOCKSIZE.

  Change zfs_condense_indirect_commit_entry_delay_ticks to
  zfs_condense_indirect_commit_entry_delay_ms for consistency with
  most other tunables in which delays are specified in ms.

* ZTS changes:

    Use set_tunable rather than mdb
    Use zpool sync as appropriate
    Use sync_pool instead of sync
    Kill jobs during test_removal_with_operation to allow unmount/export
    Don't add non-disk names such as "mirror" or "raidz" to $DISKS
    Use $TEST_BASE_DIR instead of /tmp
    Increase HZ from 100 to 1000 which is more common on Linux

    removal_multiple_indirection.ksh
        Reduce iterations in order to not time out on the code
        coverage builders.

    removal_resume_export:
        Functionally, the test case is correct but there exists a race
        where the kernel thread hasn't been fully started yet and is
        not visible.  Wait for up to 1 second for the removal thread
        to be started before giving up on it.  Also, increase the
        amount of data copied in order that the removal not finish
        before the export has a chance to fail.

* MMP compatibility, the concept of concrete versus non-concrete devices
  has slightly changed the semantics of vdev_writeable().  Update
  mmp_random_leaf_impl() accordingly.

* Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool
  feature which is not supported by OpenZFS.

* Added support for new vdev removal tracepoints.

* Test cases removal_with_zdb and removal_condense_export have been
  intentionally disabled.  When run manually they pass as intended,
  but when running in the automated test environment they produce
  unreliable results on the latest Fedora release.

  They may work better once the upstream pool import refectoring is
  merged into ZoL at which point they will be re-enabled.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Alex Reece <alex@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://www.illumos.org/issues/7614
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb
Closes #6900
2018-04-14 12:16:17 -07:00
Olaf Faaland cec3a0a1bb Report pool suspended due to MMP
When the pool is suspended, record whether it was due to an I/O error or
due to MMP writes failing to succeed within the required time.

Change spa_suspended from uint8_t to zio_suspend_reason_t to store the
reason.

When userspace queries pool status via spa_tryimport(), report the
reason the pool was suspended in a new key,
ZPOOL_CONFIG_SUSPENDED_REASON.

In libzfs, when interpreting the returned config nvlist, report
suspension due to MMP with a new pool status enum value,
ZPOOL_STATUS_IO_FAILURE_MMP.

In status_callback(), which generates and emits the message when 'zpool
status' is executed, add a case to print an appropriate message for the
new pool status enum value.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7296
2018-03-15 10:56:55 -07:00
Nasf-Fan 9c5167d19f Project Quota on ZFS
Project quota is a new ZFS system space/object usage accounting
and enforcement mechanism. Similar as user/group quota, project
quota is another dimension of system quota. It bases on the new
object attribute - project ID.

Project ID is a numerical value to indicate to which project an
object belongs. An object only can belong to one project though
you (the object owner or privileged user) can change the object
project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly.
The object also can inherit the project ID from its parent when
created if the parent has the project inherit flag (that can be
set via 'chattr +P' or 'zfs project -s [-p]').

By accounting the spaces/objects belong to the same project, we
can know how many spaces/objects used by the project. And if we
set the upper limit then we can control the spaces/objects that
are consumed by such project. It is useful when multiple groups
and users cooperate for the same project, or a user/group needs
to participate in multiple projects.

Support the following commands and functionalities:

zfs set projectquota@project
zfs set projectobjquota@project

zfs get projectquota@project
zfs get projectobjquota@project
zfs get projectused@project
zfs get projectobjused@project

zfs projectspace

zfs allow projectquota
zfs allow projectobjquota
zfs allow projectused
zfs allow projectobjused

zfs unallow projectquota
zfs unallow projectobjquota
zfs unallow projectused
zfs unallow projectobjused

chattr +/-P
chattr -p project_id
lsattr -p

This patch also supports tree quota based on the project quota via
"zfs project" commands set as following:
zfs project [-d|-r] <file|directory ...>
zfs project -C [-k] [-r] <file|directory ...>
zfs project -c [-0] [-d|-r] [-p id] <file|directory ...>
zfs project [-p id] [-r] [-s] <file|directory ...>

For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on
the $DIR, then the proejct [obj]quota and [obj]used values for the
$DIR's project ID will be shown as the total/free (avail) resource.
Keep the same behavior as EXT4/XFS does.

Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by  Ned Bass <bass6@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fan Yong <fan.yong@intel.com>
TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master"
Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c
Closes #6290
2018-02-13 14:54:54 -08:00
Serapheim Dimitropoulos 5b72a38d68 OpenZFS 8677 - Open-Context Channel Programs
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported-by: Don Brady <don.brady@delphix.com>

We want to be able to run channel programs outside of synching
context. This would greatly improve performance for channel programs
that just gather information, as they won't have to wait for synching
context anymore.

=== What is implemented?

This feature introduces the following:
- A new command line flag in "zfs program" to specify our intention
  to run in open context. (The -n option)
- A new flag/option within the channel program ioctl which selects
  the context.
- Appropriate error handling whenever we try a channel program in
  open-context that contains zfs.sync* expressions.
- Documentation for the new feature in the manual pages.

=== How do we handle zfs.sync functions in open context?

When such a function is found by the interpreter and we are running
in open context we abort the script and we spit out a descriptive
runtime error. For example, given the script below ...

arg = ...
fs = arg["argv"][1]
err = zfs.sync.destroy(fs)
msg = "destroying " .. fs .. " err=" .. err
return msg

if we run it in open context, we will get back the following error:

Channel program execution failed:
[string "channel program"]:3: running functions from the zfs.sync
submodule requires passing sync=TRUE to lzc_channel_program()
(i.e. do not specify the "-n" command line argument)
stack traceback:
            [C]: in function 'destroy'
            [string "channel program"]:3: in main chunk

=== What about testing?

We've introduced new wrappers for all channel program tests that
run each channel program as both (startard & open-context) and
expect the appropriate behavior depending on the program using
the zfs.sync module.

OpenZFS-issue: https://www.illumos.org/issues/8677
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/17a49e15
Closes #6558
2018-02-08 16:05:57 -08:00
Chris Williamson d99a015343 OpenZFS 7431 - ZFS Channel Programs
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Don Brady <don.brady@delphix.com>
Ported-by: John Kennedy <john.kennedy@delphix.com>

OpenZFS-issue: https://www.illumos.org/issues/7431
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533

Porting Notes:
* The CLI long option arguments for '-t' and '-m' don't parse on linux
* Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc
* Lua implementation is built as its own module (zlua.ko)
* Lua headers consumed directly by zfs code moved to 'include/sys/lua/'
* There is no native setjmp/longjump available in stock Linux kernel.
  Brought over implementations from illumos and FreeBSD
* The get_temporary_prop() was adapted due to VFS platform differences
* Use of inline functions in lua parser to reduce stack usage per C call
* Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
2018-02-08 15:28:18 -08:00
Tom Caputi ae76f45cda Encryption Stability and On-Disk Format Fixes
The on-disk format for encrypted datasets protects not only
the encrypted and authenticated blocks themselves, but also
the order and interpretation of these blocks. In order to
make this work while maintaining the ability to do raw
sends, the indirect bps maintain a secure checksum of all
the MACs in the block below it along with a few other
fields that determine how the data is interpreted.

Unfortunately, the current on-disk format erroneously
includes some fields which are not portable and thus cannot
support raw sends. It is not possible to easily work around
this issue due to a separate and much smaller bug which
causes indirect blocks for encrypted dnodes to not be
compressed, which conflicts with the previous bug. In
addition, the current code generates incompatible on-disk
formats on big endian and little endian systems due to an
issue with how block pointers are authenticated. Finally,
raw send streams do not currently include dn_maxblkid when
sending both the metadnode and normal dnodes which are
needed in order to ensure that we are correctly maintaining
the portable objset MAC.

This patch zero's out the offending fields when computing
the bp MAC and ensures that these MACs are always
calculated in little endian order (regardless of the host
system's byte order). This patch also registers an errata
for the old on-disk format, which we detect by adding a
"version" field to newly created DSL Crypto Keys. We allow
datasets without a version (version 0) to only be mounted
for read so that they can easily be migrated. We also now
include dn_maxblkid in raw send streams to ensure the MAC
can be maintained correctly.

This patch also contains minor bug fixes and cleanups.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6845
Closes #6864
Closes #7052
2018-02-02 11:37:16 -08:00
Brian Behlendorf 31864e3d8c
OpenZFS 8652 - Tautological comparisons with ZPROP_INVAL
usr/src/uts/common/sys/fs/zfs.h
	Change ZPROP_INVAL and ZPROP_CONT from macros to enum values.  Clang
	and GCC both prefer to use unsigned ints to store enums.  That was
	causing tautological comparison warnings (and likely eliminating
	error handling code at compile time) whenever a zfs_prop_t or
	zpool_prop_t was compared to ZPROP_INVAL or ZPROP_CONT.  Making the
	error flags be explicity enum values forces the enum types to be
	signed.

	ZPROP_INVAL was also compared against two different enum types.  I
	had to change its name to ZPOOL_PROP_INVAL whenever its compared to
	a zpool_prop_t.  There are still some places where ZPROP_INVAL or
	ZPROP_CONT is compared to a plain int, in code that doesn't know
	whether the int is storing a zfs_prop_t or a zpool_prop_t.

usr/src/uts/common/fs/zfs/spa.c
	s/ZPROP_INVAL/ZPOOL_PROP_INVAL/

Authored by: Alan Somers <asomers@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/8652
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c2de80dc74
Closes #7061
2018-01-19 09:22:37 -08:00
Tom Caputi d4677269f2 Unbreak the scan status ABI
When d4a72f23 was merged, pss_pass_issued was incorrectly
added to the middle of the pool_scan_stat_t structure
instead of the end. This patch simply corrects this issue.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6909
2017-11-30 09:40:13 -08:00
Tom Caputi d4a72f2386 Sequential scrub and resilvers
Currently, scrubs and resilvers can take an extremely
long time to complete. This is largely due to the fact
that zfs scans process pools in logical order, as
determined by each block's bookmark. This makes sense
from a simplicity perspective, but blocks in zfs are
often scattered randomly across disks, particularly
due to zfs's copy-on-write mechanisms.

This patch improves performance by splitting scrubs
and resilvers into a metadata scanning phase and an IO
issuing phase. The metadata scan reads through the
structure of the pool and gathers an in-memory queue
of I/Os, sorted by size and offset on disk. The issuing
phase will then issue the scrub I/Os as sequentially as
possible, greatly improving performance.

This patch also updates and cleans up some of the scan
code which has not been updated in several years.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Authored-by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Authored-by: Alek Pinchuk <apinchuk@datto.com>
Authored-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #3625 
Closes #6256
2017-11-15 17:27:01 -08:00
Tom Caputi b525630342 Native Encryption for ZFS on Linux
This change incorporates three major pieces:

The first change is a keystore that manages wrapping
and encryption keys for encrypted datasets. These
commands mostly involve manipulating the new
DSL Crypto Key ZAP Objects that live in the MOS. Each
encrypted dataset has its own DSL Crypto Key that is
protected with a user's key. This level of indirection
allows users to change their keys without re-encrypting
their entire datasets. The change implements the new
subcommands "zfs load-key", "zfs unload-key" and
"zfs change-key" which allow the user to manage their
encryption keys and settings. In addition, several new
flags and properties have been added to allow dataset
creation and to make mounting and unmounting more
convenient.

The second piece of this patch provides the ability to
encrypt, decyrpt, and authenticate protected datasets.
Each object set maintains a Merkel tree of Message
Authentication Codes that protect the lower layers,
similarly to how checksums are maintained. This part
impacts the zio layer, which handles the actual
encryption and generation of MACs, as well as the ARC
and DMU, which need to be able to handle encrypted
buffers and protected data.

The last addition is the ability to do raw, encrypted
sends and receives. The idea here is to send raw
encrypted and compressed data and receive it exactly
as is on a backup system. This means that the dataset
on the receiving system is protected using the same
user key that is in use on the sending side. By doing
so, datasets can be efficiently backed up to an
untrusted system without fear of data being
compromised.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #494 
Closes #5769
2017-08-14 10:36:48 -07:00
Olaf Faaland 379ca9cf2b Multi-modifier protection (MMP)
Add multihost=on|off pool property to control MMP.  When enabled
a new thread writes uberblocks to the last slot in each label, at a
set frequency, to indicate to other hosts the pool is actively imported.
These uberblocks are the last synced uberblock with an updated
timestamp.  Property defaults to off.

During tryimport, find the "best" uberblock (newest txg and timestamp)
repeatedly, checking for change in the found uberblock.  Include the
results of the activity test in the config returned by tryimport.
These results are reported to user in "zpool import".

Allow the user to control the period between MMP writes, and the
duration of the activity test on import, via a new module parameter
zfs_multihost_interval.  The period is specified in milliseconds.  The
activity test duration is calculated from this value, and from the
mmp_delay in the "best" uberblock found initially.

Add a kstat interface to export statistics about Multiple Modifier
Protection (MMP) updates. Include the last synced txg number, the
timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV
label that received the last MMP update, and the VDEV path.  Abbreviated
output below.

$ cat /proc/spl/kstat/zfs/mypool/multihost
31 0 0x01 10 880 105092382393521 105144180101111
txg   timestamp  mmp_delay   vdev_guid   vdev_label vdev_path
20468    261337  250274925   68396651780       3    /dev/sda
20468    261339  252023374   6267402363293     1    /dev/sdc
20468    261340  252000858   6698080955233     1    /dev/sdx
20468    261341  251980635   783892869810      2    /dev/sdy
20468    261342  253385953   8923255792467     3    /dev/sdd
20468    261344  253336622   042125143176      0    /dev/sdab
20468    261345  253310522   1200778101278     2    /dev/sde
20468    261346  253286429   0950576198362     2    /dev/sdt
20468    261347  253261545   96209817917       3    /dev/sds
20468    261349  253238188   8555725937673     3    /dev/sdb

Add a new tunable zfs_multihost_history to specify the number of MMP
updates to store history for. By default it is set to zero meaning that
no MMP statistics are stored.

When using ztest to generate activity, for automated tests of the MMP
function, some test functions interfere with the test.  For example, the
pool is exported to run zdb and then imported again.  Add a new ztest
function, "-M", to alter ztest behavior to prevent this.

Add new tests to verify the new functionality.  Tests provided by
Giuseppe Di Natale.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #745
Closes #6279
2017-07-13 13:54:00 -04:00
Dave Eddy 12fa0466df OpenZFS 6939 - add sysevents to zfs core for commands
Authored by: Dave Eddy <dave@daveeddy.com>
Reviewed by: Patrick Mooney <patrick.mooney@joyent.com>
Reviewed by: Joshua M. Clulow <jmc@joyent.com>
Reviewed by: Josh Wilsdon <jwilsdon@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Alan Somers <asomers@gmail.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6939
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ce1577b
Closes #6328
2017-07-12 21:28:13 -07:00
LOLi cf8738d853 Add port of FreeBSD 'volmode' property
The volmode property may be set to control the visibility of ZVOL
block devices.

This allow switching ZVOL between three modes:
   full - existing fully functional behaviour (default)
   dev  - hide partitions on ZVOL block devices
   none - not exposing volumes outside ZFS

Additionally the new zvol_volmode module parameter can be used to
control the default behaviour.

This functionality can be used, for instance, on "backup" pools to
avoid cluttering /dev with unneeded zd* devices.

Original-patch-by: mav <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>

FreeBSD-commit: https://github.com/freebsd/freebsd/commit/dd28e6bb
Closes #1796 
Closes #3438 
Closes #6233
2017-07-12 13:05:37 -07:00
Alek P 0ea05c64f8 Implemented zpool scrub pause/resume
Currently, there is no way to pause a scrub. Pausing may
be useful when the pool is busy with other I/O to preserve
bandwidth.

This patch adds the ability to pause and resume scrubbing.
This is achieved by maintaining a persistent on-disk scrub state.
While the state is 'paused' we do not scrub any more blocks.
We do however perform regular scan housekeeping such as
freeing async destroyed and deadlist blocks while paused.

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Thomas Caputi <tcaputi@datto.com>
Reviewed-by: Serapheim Dimitropoulos <serapheimd@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6167
2017-07-06 22:16:13 -07:00
Alek P bec1067d54 Implemented zpool sync command
This addition will enable us to sync an open TXG to the main pool
on demand. The functionality is similar to 'sync(2)' but 'zpool sync'
will return when data has hit the main storage instead of potentially
just the ZIL as is the case with the 'sync(2)' cmd.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #6122
2017-05-19 12:33:11 -07:00
Tony Hutter 4a283c7f77 Force fault a vdev with 'zpool offline -f'
This patch adds a '-f' option to 'zpool offline' to fault a vdev
instead of bringing it offline.  Unlike the OFFLINE state, the
FAULTED state will trigger the FMA code, allowing for things like
autoreplace and triggering the slot fault LED.  The -f faults
persist across imports, unless they were set with the temporary
(-t) flag.  Both persistent and temporary faults can be cleared
with zpool clear.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #6094
2017-05-19 12:30:16 -07:00
Christian Schwarz 305bc4b370 Make createtxg and guid properties public
Document the existence of `createtxg` and `guid` native properties
in man pages and zfs command output.

One of the great features of ZFS is incremental replication of
snapshots, possibly between pools on different machines.

Shell scripts are commonly used to auomate this procedure. They have to
find the most recent common snapshot between both sides and then
perform incremental send & recv.
Currently, scripts rely on the sorting order of `zfs list`, which
defaults to `createtxg`, and the assumption that snapshot names on
either side do not change.

By making `createtxg` and `guid` part of the public ZFS interface,
scripts are enabled to use

  a) `createtxg` to determine the logical & temporal order of snapshots
     (the creation property is not an equivalent substitute since
      multiple snapshots may be created within one second)
  b) `guid` to uniquely identify a snapshot, independent of its current
      display name

This has the potential of making scripts safer and correct.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: DHE <git@dehacked.net>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Christian Schwarz <me@cschwarz.com>
Closes #6102
2017-05-09 15:36:53 -07:00
LOLi ff61d1a495 Check ashift validity in 'zpool add'
df83110 added the ability to specify a custom "ashift" value from the command
line in 'zpool add' and 'zpool attach'. This commit adds additional checks to
the provided ashift to prevent invalid values from being used, which could
result in disastrous consequences for the whole pool.

Additionally provide ASHIFT_MAX and ASHIFT_MIN definitions in spa.h.

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #5878
2017-03-28 17:21:11 -07:00
George Melikov 774ee3c7ce OpenZFS 7336 - vfork and O_CLOEXEC causes zfs_mount EBUSY
Porting notes:
- statvfs64 is replaced by statfs64.
- ZFS_SUPER_MAGIC definition moved in include/sys/fs/zfs.h
  to share it between user and kernel space.

Authored by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov <mail@gmelikov.ru>

OpenZFS-issue: https://www.illumos.org/issues/7336
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dd862f6d
Closes #5651
2017-01-26 12:28:29 -08:00
George Melikov e67a7ffb5d OpenZFS 6052 - decouple lzc_create() from the implementation details
Authored by: Andriy Gapon <andriy.gapon@clusterhq.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: George Melikov mail@gmelikov.ru

OpenZFS-issue: https://www.illumos.org/issues/6052
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/26455f9
Closes #5622
2017-01-23 09:49:57 -08:00
Brian Behlendorf 648a09adc2 OpenZFS 6550 - cmd/zfs: cleanup gcc warnings
Porting Notes:
- Many of the fixes proposed by this patch were already applied.
In the cases where a different but equivalent fix was made the
code was updated with the OpenZFS version to minimize differences.

Authored by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6550
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c16bcc4
Closes #5591
2017-01-17 14:45:02 -08:00
ka7 4e33ba4c38 Fix spelling
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes #5547 
Closes #5543
2017-01-03 11:31:18 -06:00
cao 2bac68145f Fix coverity defects: CID 147548
CID 147548: Type:Dereference null return value

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: cao.xuewen <cao.xuewen@zte.com.cn>
Closes #5321
2016-10-31 16:56:10 -07:00
Tony Hutter 1bbd877049 Turn on/off enclosure slot fault LED even when disk isn't present
Previously when a drive faulted, the statechange-led.sh script would lookup
the drive's LED sysfs entry in /sys/block/sd*/device/enclosure_device, and
turn it on.  During testing we noticed that if you pulled out a drive, or if
the drive was so badly broken that it no longer appeared to Linux, that the
/sys/block/sd* path would be removed, and the script could not lookup the
LED entry.

To fix this, this patch looks up the disks's more persistent
"/sys/class/enclosure/X:X:X:X/Slot N" LED sysfs path at pool import.  It then
passes that path to the statechange-led script to use, rather than having the
script look it up on the fly.  This allows the script to turn on/off the slot
LEDs even when the drive is missing.

Closes #5309 
Closes #2375
2016-10-24 10:45:59 -07:00
Don Brady 3dfb57a35e OpenZFS 7090 - zfs should throttle allocations
OpenZFS 7090 - zfs should throttle allocations

Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Ported-by: Don Brady <don.brady@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>

When write I/Os are issued, they are issued in block order but the ZIO
pipeline will drive them asynchronously through the allocation stage
which can result in blocks being allocated out-of-order. It would be
nice to preserve as much of the logical order as possible.

In addition, the allocations are equally scattered across all top-level
VDEVs but not all top-level VDEVs are created equally. The pipeline
should be able to detect devices that are more capable of handling
allocations and should allocate more blocks to those devices. This
allows for dynamic allocation distribution when devices are imbalanced
as fuller devices will tend to be slower than empty devices.

The change includes a new pool-wide allocation queue which would
throttle and order allocations in the ZIO pipeline. The queue would be
ordered by issued time and offset and would provide an initial amount of
allocation of work to each top-level vdev. The allocation logic utilizes
a reservation system to reserve allocations that will be performed by
the allocator. Once an allocation is successfully completed it's
scheduled on a given top-level vdev. Each top-level vdev maintains a
maximum number of allocations that it can handle (mg_alloc_queue_depth).
The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth)
are distributed across the top-level vdevs metaslab groups and round
robin across all eligible metaslab groups to distribute the work. As
top-levels complete their work, they receive additional work from the
pool-wide allocation queue until the allocation queue is emptied.

OpenZFS-issue: https://www.illumos.org/issues/7090
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7
Closes #5258 

Porting Notes:
- Maintained minimal stack in zio_done
- Preserve linux-specific io sizes in zio_write_compress
- Added module params and documentation
- Updated to use optimize AVL cmp macros
2016-10-13 17:59:18 -07:00
Jinshan Xiong 1de321e626 Add support for user/group dnode accounting & quota
This patch tracks dnode usage for each user/group in the
DMU_USER/GROUPUSED_OBJECT ZAPs. ZAP entries dedicated to dnode
accounting have the key prefixed with "obj-" followed by the UID/GID
in string format (as done for the block accounting).
A new SPA feature has been added for dnode accounting as well as
a new ZPL version. The SPA feature must be enabled in the pool
before upgrading the zfs filesystem. During the zfs version upgrade,
a "quotacheck" will be executed by marking all dnode as dirty.

ZoL-bug-id: https://github.com/zfsonlinux/zfs/issues/3500

Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
2016-10-07 09:45:13 -07:00
GeLiXin d5884c3453 Fix indefinite article
The indefinite article before nvlist should be "an", not "a".

We have 27 "an nvlist" and 7 "a nvlist" in our comment, they should
stay the same as we are such a strict filesystem.

Signed-off-by: GeLiXin <ge.lixin@zte.com.cn>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4941
2016-08-11 11:23:49 -07:00
Igor Kozhukhov eca7b76001 OpenZFS 6314 - buffer overflow in dsl_dataset_name
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6314
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/d6160ee
2016-06-28 13:47:03 -07:00
Brian Behlendorf 43e52eddb1 Implement zfs_ioc_recv_new() for OpenZFS 2605
Adds ZFS_IOC_RECV_NEW for resumable streams and preserves the legacy
ZFS_IOC_RECV user/kernel interface.  The new interface supports all
stream options but is currently only used for resumable streams.
This way updated user space utilities will interoperate with older
kernel modules.

ZFS_IOC_RECV_NEW is modeled after the existing ZFS_IOC_SEND_NEW
handler.  Non-Linux OpenZFS platforms have opted to change the
legacy interface in an incompatible fashion instead of adding a
new ioctl.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-06-28 13:47:03 -07:00
Matthew Ahrens 47dfff3b86 OpenZFS 2605, 6980, 6902
2605 want to resume interrupted zfs send
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/2605
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12

6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6980
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f

Porting notes:
- All rsend and snapshop tests enabled and updated for Linux.
- Fix misuse of input argument in traverse_visitbp().
- Fix ISO C90 warnings and errors.
- Fix gcc 'missing braces around initializer' in
  'struct send_thread_arg to_arg =' warning.
- Replace 4 argument fletcher_4_native() with 3 argument version,
  this change was made in OpenZFS 4185 which has not been ported.
- Part of the sections for 'zfs receive' and 'zfs send' was
  rewritten and reordered to approximate upstream.
- Fix mktree xattr creation, 'user.' prefix required.
- Minor fixes to newly enabled test cases
- Long holds for volumes allowed during receive for minor registration.
2016-06-28 13:47:02 -07:00
Ned Bass 50c957f702 Implement large_dnode pool feature
Justification
-------------

This feature adds support for variable length dnodes. Our motivation is
to eliminate the overhead associated with using spill blocks.  Spill
blocks are used to store system attribute data (i.e. file metadata) that
does not fit in the dnode's bonus buffer. By allowing a larger bonus
buffer area the use of a spill block can be avoided.  Spill blocks
potentially incur an additional read I/O for every dnode in a dnode
block. As a worst case example, reading 32 dnodes from a 16k dnode block
and all of the spill blocks could issue 33 separate reads. Now suppose
those dnodes have size 1024 and therefore don't need spill blocks.  Then
the worst case number of blocks read is reduced to from 33 to two--one
per dnode block. In practice spill blocks may tend to be co-located on
disk with the dnode blocks so the reduction in I/O would not be this
drastic. In a badly fragmented pool, however, the improvement could be
significant.

ZFS-on-Linux systems that make heavy use of extended attributes would
benefit from this feature. In particular, ZFS-on-Linux supports the
xattr=sa dataset property which allows file extended attribute data
to be stored in the dnode bonus buffer as an alternative to the
traditional directory-based format. Workloads such as SELinux and the
Lustre distributed filesystem often store enough xattr data to force
spill bocks when xattr=sa is in effect. Large dnodes may therefore
provide a performance benefit to such systems.

Other use cases that may benefit from this feature include files with
large ACLs and symbolic links with long target names. Furthermore,
this feature may be desirable on other platforms in case future
applications or features are developed that could make use of a
larger bonus buffer area.

Implementation
--------------

The size of a dnode may be a multiple of 512 bytes up to the size of
a dnode block (currently 16384 bytes). A dn_extra_slots field was
added to the current on-disk dnode_phys_t structure to describe the
size of the physical dnode on disk. The 8 bits for this field were
taken from the zero filled dn_pad2 field. The field represents how
many "extra" dnode_phys_t slots a dnode consumes in its dnode block.
This convention results in a value of 0 for 512 byte dnodes which
preserves on-disk format compatibility with older software.

Similarly, the in-memory dnode_t structure has a new dn_num_slots field
to represent the total number of dnode_phys_t slots consumed on disk.
Thus dn->dn_num_slots is 1 greater than the corresponding
dnp->dn_extra_slots. This difference in convention was adopted
because, unlike on-disk structures, backward compatibility is not a
concern for in-memory objects, so we used a more natural way to
represent size for a dnode_t.

The default size for newly created dnodes is determined by the value of
a new "dnodesize" dataset property. By default the property is set to
"legacy" which is compatible with older software. Setting the property
to "auto" will allow the filesystem to choose the most suitable dnode
size. Currently this just sets the default dnode size to 1k, but future
code improvements could dynamically choose a size based on observed
workload patterns. Dnodes of varying sizes can coexist within the same
dataset and even within the same dnode block. For example, to enable
automatically-sized dnodes, run

 # zfs set dnodesize=auto tank/fish

The user can also specify literal values for the dnodesize property.
These are currently limited to powers of two from 1k to 16k. The
power-of-2 limitation is only for simplicity of the user interface.
Internally the implementation can handle any multiple of 512 up to 16k,
and consumers of the DMU API can specify any legal dnode value.

The size of a new dnode is determined at object allocation time and
stored as a new field in the znode in-memory structure. New DMU
interfaces are added to allow the consumer to specify the dnode size
that a newly allocated object should use. Existing interfaces are
unchanged to avoid having to update every call site and to preserve
compatibility with external consumers such as Lustre. The new
interfaces names are given below. The versions of these functions that
don't take a dnodesize parameter now just call the _dnsize() versions
with a dnodesize of 0, which means use the legacy dnode size.

New DMU interfaces:
  dmu_object_alloc_dnsize()
  dmu_object_claim_dnsize()
  dmu_object_reclaim_dnsize()

New ZAP interfaces:
  zap_create_dnsize()
  zap_create_norm_dnsize()
  zap_create_flags_dnsize()
  zap_create_claim_norm_dnsize()
  zap_create_link_dnsize()

The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The
spa_maxdnodesize() function should be used to determine the maximum
bonus length for a pool.

These are a few noteworthy changes to key functions:

* The prototype for dnode_hold_impl() now takes a "slots" parameter.
  When the DNODE_MUST_BE_FREE flag is set, this parameter is used to
  ensure the hole at the specified object offset is large enough to
  hold the dnode being created. The slots parameter is also used
  to ensure a dnode does not span multiple dnode blocks. In both of
  these cases, if a failure occurs, ENOSPC is returned. Keep in mind,
  these failure cases are only possible when using DNODE_MUST_BE_FREE.

  If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0.
  dnode_hold_impl() will check if the requested dnode is already
  consumed as an extra dnode slot by an large dnode, in which case
  it returns ENOENT.

* The function dmu_object_alloc() advances to the next dnode block
  if dnode_hold_impl() returns an error for a requested object.
  This is because the beginning of the next dnode block is the only
  location it can safely assume to either be a hole or a valid
  starting point for a dnode.

* dnode_next_offset_level() and other functions that iterate
  through dnode blocks may no longer use a simple array indexing
  scheme. These now use the current dnode's dn_num_slots field to
  advance to the next dnode in the block. This is to ensure we
  properly skip the current dnode's bonus area and don't interpret it
  as a valid dnode.

zdb
---
The zdb command was updated to display a dnode's size under the
"dnsize" column when the object is dumped.

For ZIL create log records, zdb will now display the slot count for
the object.

ztest
-----
Ztest chooses a random dnodesize for every newly created object. The
random distribution is more heavily weighted toward small dnodes to
better simulate real-world datasets.

Unused bonus buffer space is filled with non-zero values computed from
the object number, dataset id, offset, and generation number.  This
helps ensure that the dnode traversal code properly skips the interior
regions of large dnodes, and that these interior regions are not
overwritten by data belonging to other dnodes. A new test visits each
object in a dataset. It verifies that the actual dnode size matches what
was stored in the ztest block tag when it was created. It also verifies
that the unused bonus buffer space is filled with the expected data
patterns.

ZFS Test Suite
--------------
Added six new large dnode-specific tests, and integrated the dnodesize
property into existing tests for zfs allow and send/recv.

Send/Receive
------------
ZFS send streams for datasets containing large dnodes cannot be received
on pools that don't support the large_dnode feature. A send stream with
large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be
unrecognized by an incompatible receiving pool so that the zfs receive
will fail gracefully.

While not implemented here, it may be possible to generate a
backward-compatible send stream from a dataset containing large
dnodes. The implementation may be tricky, however, because the send
object record for a large dnode would need to be resized to a 512
byte dnode, possibly kicking in a spill block in the process. This
means we would need to construct a new SA layout and possibly
register it in the SA layout object. The SA layout is normally just
sent as an ordinary object record. But if we are constructing new
layouts while generating the send stream we'd have to build the SA
layout object dynamically and send it at the end of the stream.

For sending and receiving between pools that do support large dnodes,
the drr_object send record type is extended with a new field to store
the dnode slot count. This field was repurposed from unused padding
in the structure.

ZIL Replay
----------
The dnode slot count is stored in the uppermost 8 bits of the lr_foid
field. The bits were unused as the object id is currently capped at
48 bits.

Resizing Dnodes
---------------
It should be possible to resize a dnode when it is dirtied if the
current dnodesize dataset property differs from the dnode's size, but
this functionality is not currently implemented. Clearly a dnode can
only grow if there are sufficient contiguous unused slots in the
dnode block, but it should always be possible to shrink a dnode.
Growing dnodes may be useful to reduce fragmentation in a pool with
many spill blocks in use. Shrinking dnodes may be useful to allow
sending a dataset to a pool that doesn't support the large_dnode
feature.

Feature Reference Counting
--------------------------
The reference count for the large_dnode pool feature tracks the
number of datasets that have ever contained a dnode of size larger
than 512 bytes. The first time a large dnode is created in a dataset
the dataset is converted to an extensible dataset. This is a one-way
operation and the only way to decrement the feature count is to
destroy the dataset, even if the dataset no longer contains any large
dnodes. The complexity of reference counting on a per-dnode basis was
too high, so we chose to track it on a per-dataset basis similarly to
the large_block feature.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3542
2016-06-24 13:13:21 -07:00
Tony Hutter 7e945072d1 Add request size histograms (-r) to zpool iostat, minor man page fix
Add -r option to "zpool iostat" to print request size histograms for the leaf
ZIOs. This includes histograms of individual ZIOs ("ind") and aggregate ZIOs
("agg"). These stats can be useful for seeing how well the ZFS IO aggregator
is working.

$ zpool iostat -r
mypool        sync_read    sync_write    async_read    async_write      scrub
req_size      ind    agg    ind    agg    ind    agg    ind    agg    ind    agg
----------  -----  -----  -----  -----  -----  -----  -----  -----  -----  -----
512             0      0      0      0      0      0    530      0      0      0
1K              0      0    260      0      0      0    116    246      0      0
2K              0      0      0      0      0      0      0    431      0      0
4K              0      0      0      0      0      0      3    107      0      0
8K             15      0     35      0      0      0      0      6      0      0
16K             0      0      0      0      0      0      0     39      0      0
32K             0      0      0      0      0      0      0      0      0      0
64K            20      0     40      0      0      0      0      0      0      0
128K            0      0     20      0      0      0      0      0      0      0
256K            0      0      0      0      0      0      0      0      0      0
512K            0      0      0      0      0      0      0      0      0      0
1M              0      0      0      0      0      0      0      0      0      0
2M              0      0      0      0      0      0      0      0      0      0
4M              0      0      0      0      0      0    155     19      0      0
8M              0      0      0      0      0      0      0    811      0      0
16M             0      0      0      0      0      0      0     68      0      0
--------------------------------------------------------------------------------

Also rename the stray "-G" in the man page to be "-w" for latency histograms.

Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #4659
2016-05-25 15:49:35 -07:00
Tony Hutter 193a37cb24 Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues
Update the zfs module to collect statistics on average latencies, queue sizes,
and keep an internal histogram of all IO latencies.  Along with this, update
"zpool iostat" with some new options to print out the stats:

-l: Include average IO latencies stats:

 total_wait     disk_wait    syncq_wait    asyncq_wait  scrub
 read  write   read  write   read  write   read  write   wait
-----  -----  -----  -----  -----  -----  -----  -----  -----
    -   41ms      -    2ms      -   46ms      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -    5ms      -    1ms      -    1us      -    4ms      -
    -      -      -      -      -      -      -      -      -
    -   49ms      -    2ms      -   47ms      -      -      -
    -      -      -      -      -      -      -      -      -
    -    2ms      -    1ms      -      -      -    1ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  1ms    1ms    1ms  413us   16us   25us      -    5ms      -
  2ms    1ms    2ms  412us   26us   25us      -    5ms      -
    -    1ms      -  413us      -   25us      -    5ms      -
    -    1ms      -  460us      -   29us      -    5ms      -
196us    1ms  196us  370us    7us   23us      -    5ms      -
-----  -----  -----  -----  -----  -----  -----  -----  -----

-w: Print out latency histograms:

sdb           total           disk         sync_queue      async_queue
latency    read   write    read   write    read   write    read   write   scrub
-------  ------  ------  ------  ------  ------  ------  ------  ------  ------
1ns           0       0       0       0       0       0       0       0       0
...
33us          0       0       0       0       0       0       0       0       0
66us          0       0     107    2486       2     788      12      12       0
131us         2     797     359    4499      10     558     184     184       6
262us        22     801     264    1563      10     286     287     287      24
524us        87     575      71   52086      15    1063     136     136      92
1ms         152    1190       5   41292       4    1693     252     252     141
2ms         245    2018       0   50007       0    2322     371     371     220
4ms         189    7455      22  162957       0    3912    6726    6726     199
8ms         108    9461       0  102320       0    5775    2526    2526      86
17ms         23   11287       0   37142       0    8043    1813    1813      19
34ms          0   14725       0   24015       0   11732    3071    3071       0
67ms          0   23597       0    7914       0   18113    5025    5025       0
134ms         0   33798       0     254       0   25755    7326    7326       0
268ms         0   51780       0      12       0   41593   10002   10002       0
537ms         0   77808       0       0       0   64255   13120   13120       0
1s            0  105281       0       0       0   83805   20841   20841       0
2s            0   88248       0       0       0   73772   14006   14006       0
4s            0   47266       0       0       0   29783   17176   17176       0
9s            0   10460       0       0       0    4130    6295    6295       0
17s           0       0       0       0       0       0       0       0       0
34s           0       0       0       0       0       0       0       0       0
69s           0       0       0       0       0       0       0       0       0
137s          0       0       0       0       0       0       0       0       0
-------------------------------------------------------------------------------

-h: Help

-H: Scripted mode. Do not display headers, and separate fields by a single
    tab instead of arbitrary space.

-q: Include current number of entries in sync & async read/write queues,
    and scrub queue:

 syncq_read    syncq_write   asyncq_read  asyncq_write   scrubq_read
 pend  activ   pend  activ   pend  activ   pend  activ   pend  activ
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0     78     29      0      0      0      0
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
    -      -      -      -      -      -      -      -      -      -
    0      0      0      0      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----
    0      0    227    394      0     19      0      0      0      0
    0      0    227    394      0     19      0      0      0      0
    0      0    108     98      0     19      0      0      0      0
    0      0     19     98      0      0      0      0      0      0
    0      0     78     98      0      0      0      0      0      0
    0      0     19     88      0      0      0      0      0      0
-----  -----  -----  -----  -----  -----  -----  -----  -----  -----

-p: Display numbers in parseable (exact) values.

Also, update iostat syntax to allow the user to specify specific vdevs
to show statistics for.  The three options for choosing pools/vdevs are:

Display a list of pools:
    zpool iostat ... [pool ...]

Display a list of vdevs from a specific pool:
    zpool iostat ... [pool vdev ...]

Display a list of vdevs from any pools:
    zpool iostat ... [vdev ...]

Lastly, allow zpool command "interval" value to be floating point:
    zpool iostat -v 0.5

Signed-off-by: Tony Hutter <hutter2@llnl.gov
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4433
2016-05-12 12:36:32 -07:00
Joe Stein e0ab3ab553 OpenZFS 6736 - ZFS per-vdev ZAPs
6736 ZFS per-vdev ZAPs
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/6736
  https://github.com/openzfs/openzfs/commit/215198a

Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4515
2016-05-02 14:27:45 -07:00
Matthew Ahrens 1715493f38 Illumos 4929 - want prevsnap property
4929 want prevsnap property
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Matt Amdur <matt.amdur@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4929
  https://github.com/illumos/illumos-gate/commit/b461c74

Porting notes:
- [include/sys/fs/zfs.h]
  - f67d70 Create an 'overlay' property
  - 11b9ec Add full SELinux support
- [fs/zfs/dsl_dataset.c]
  - This increases the stack size of dsl_dataset_stats() but
    nothing has been changed until this is shown to be an issue.

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-11 11:58:26 -08:00
Matthew Ahrens f1512ee61e Illumos 5027 - zfs large block support
5027 zfs large block support
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5027
  https://github.com/illumos/illumos-gate/commit/b515258

Porting Notes:

* Included in this patch is a tiny ISP2() cleanup in zio_init() from
Illumos 5255.

* Unlike the upstream Illumos commit this patch does not impose an
arbitrary 128K block size limit on volumes.  Volumes, like filesystems,
are limited by the zfs_max_recordsize=1M module option.

* By default the maximum record size is limited to 1M by the module
option zfs_max_recordsize.  This value may be safely increased up to
16M which is the largest block size supported by the on-disk format.
At the moment, 1M blocks clearly offer a significant performance
improvement but the benefits of going beyond this for the majority
of workloads are less clear.

* The illumos version of this patch increased DMU_MAX_ACCESS to 32M.
This was determined not to be large enough when using 16M blocks
because the zfs_make_xattrdir() function will fail (EFBIG) when
assigning a TX.  This was immediately observed under Linux because
all newly created files must have a security xattr created and
that was failing.  Therefore, we've set DMU_MAX_ACCESS to 64M.

* On 32-bit platforms a hard limit of 1M is set for blocks due
to the limited virtual address space.  We should be able to relax
this one the ABD patches are merged.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #354
2015-05-11 12:23:16 -07:00
Jerry Jelinek 788eb90c4c Illumos 3897 - zfs filesystem and snapshot limits
3897 zfs filesystem and snapshot limits
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>

References:
  https://www.illumos.org/issues/3897
  https://github.com/illumos/illumos-gate/commit/a2afb61

Porting Notes:

dsl_dataset_snapshot_check(): reduce stack usage using kmem_alloc().

Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-28 16:22:51 -07:00
Richard Yao 83e9986f6e Implement -t option to zpool create for temporary pool names
Creating virtual machines that have their rootfs on ZFS on hosts that
have their rootfs on ZFS causes SPA namespace collisions when the
standard name rpool is used. The solution is either to give each guest
pool a name unique to the host, which is not always desireable, or boot
a VM environment containing an ISO image to install it, which is
cumbersome.

26b42f3f9d introduced `zpool import -t
...` to simplify situations where a host must access a guest's pool when
there is a SPA namespace conflict. We build upon that to introduce
`zpool import -t tname ...`. That allows us to create a pool whose
in-core name is tname, but whose on-disk name is the normal name
specified.

This simplifies the creation of machine images that use a rootfs on ZFS.
That benefits not only real world deployments, but also ZFSOnLinux
development by decreasing the time needed to perform rootfs on ZFS
experiments.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2417
2014-09-30 10:46:59 -07:00
George Wilson f3a7f6610f Illumos 4976-4984 - metaslab improvements
4976 zfs should only avoid writing to a failing non-redundant top-level vdev
4978 ztest fails in get_metaslab_refcount()
4979 extend free space histogram to device and pool
4980 metaslabs should have a fragmentation metric
4981 remove fragmented ops vector from block allocator
4982 space_map object should proactively upgrade when feature is enabled
4983 need to collect metaslab information via mdb
4984 device selection should use fragmentation metric
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4976
  https://www.illumos.org/issues/4978
  https://www.illumos.org/issues/4979
  https://www.illumos.org/issues/4980
  https://www.illumos.org/issues/4981
  https://www.illumos.org/issues/4982
  https://www.illumos.org/issues/4983
  https://www.illumos.org/issues/4984
  https://github.com/illumos/illumos-gate/commit/2e4c998

Notes:
    The "zdb -M" option has been re-tasked to display the new metaslab
    fragmentation metric and the new "zdb -I" option is used to control
    the maximum number of in-flight I/Os.

    The new fragmentation metric is derived from the space map histogram
    which has been rolled up to the vdev and pool level and is presented
    to the user via "zpool list".

    Add a number of module parameters related to the new metaslab weighting
    logic.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2595
2014-08-18 08:40:49 -07:00
Turbo Fredriksson f67d709080 Create an 'overlay' property
Add a new 'overlay' property (default 'off') that controls whether the
filesystem should be mounted even if the mountpoint is busy or if it
should fail with a 'mountpoint not empty'.

Doing overlay mounts is the default mount behavior on Linux, but not
in ZFS. It have been decided that following the ZFS behavior should
be the default, but this overlay allows for site administrator to
override this decision on a per-dataset basis.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2503
2014-08-15 13:39:19 -07:00
Matthew Ahrens fbeddd60b7 Illumos 4390 - I/O errors can corrupt space map when deleting fs/vol
4390 i/o errors when deleting filesystem/zvol can lead to space map corruption
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4390
  https://github.com/illumos/illumos-gate/commit/7fd05ac

Porting notes:

Previous stack-reduction efforts in traverse_visitb() caused a fair
number of un-mergable pieces of code.  This patch should reduce its
stack footprint a bit more.

The new local bptree_entry_phys_t in bptree_add() is dynamically-allocated
using kmem_zalloc() for the purpose of stack reduction.

The new global zfs_free_leak_on_eio has been defined as an integer
rather than a boolean_t as was the case with the related zfs_recover
global.  Also, zfs_free_leak_on_eio's definition has been inserted into
zfs_debug.c for consistency with the existing definition of zfs_recover.
Illumos placed it in spa_misc.c.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2545
2014-08-04 11:50:52 -07:00
Matthew Ahrens faf0f58c69 Illumos 3835 zfs need not store 2 copies of all metadata
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

Description from Matt Ahrens's bug report at Delphix:

    Add a new zfs property, "redundant_metadata" which can have values
    "all" or "most".  The default will be "all", which is the current
    behavior.  Setting to "most" will cause us to only store 1 copy of
    level-1 indirect blocks of user data files.

Additional notes:

    The new man page section for this property states

        "The exact behavior of which metadata blocks
         are stored redundantly may change in future releases."

    and:

        "When set to most, ZFS stores an extra copy of most types of
         metadata. This can improve performance of random writes,
         because less metadata must be written."

    The current implementation is as described above in Matt's blog.
    It is controlled by a new global integer
    "zfs_redundant_metadata_most_ditto_level", currently initialized
    to 2. When "redundant_metadata" is set to "most", only indirect
    blocks of the specified level and higher will have additional ditto
    blocks created.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2542
2014-07-31 09:49:34 -07:00
Matthew Ahrens da536844d5 Illumos 4368, 4369.
4369 implement zfs bookmarks
4368 zfs send filesystems from readonly pools
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4369
  https://www.illumos.org/issues/4368
  https://github.com/illumos/illumos-gate/commit/78f1710

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2530
2014-07-29 10:55:29 -07:00
Tim Chase 962d524212 Check the dataset type more rigorously when fetching properties.
When fetching property values of snapshots, a check against the head
dataset type must be performed.  Previously, this additional check was
performed only when fetching "version", "normalize", "utf8only" or "case".

This caused the ZPL properties "acltype", "exec", "devices", "nbmand",
"setuid" and "xattr" to be erroneously displayed with meaningless values
for snapshots of volumes.  It also did not allow for the display of
"volsize" of a snapshot of a volume.

This patch adds the headcheck flag paramater to zfs_prop_valid_for_type()
and zprop_valid_for_type() to indicate the check is being done
against a head dataset's type in order that properties valid only for
snapshots are handled correctly.  This allows the the head check in
get_numeric_property() to be performed when fetching a property for
a snapshot.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2265
2014-05-06 10:41:46 -07:00
Brian Behlendorf 75e3ff58fe Add zpool_events_seek() functionality
The ZFS_IOC_EVENTS_SEEK ioctl was added to allow user space callers
to seek around the zevent file descriptor by EID.  When a specific
EID is passed and it exists the cursor will be positioned there.
If the EID is no longer cached by the kernel ENOENT is returned.
The caller may also pass ZEVENT_SEEK_START or ZEVENT_SEEK_END to seek
to those respective locations.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
2014-03-31 16:10:57 -07:00
Richard Yao 26b42f3f9d Implement -t option to zpool import for temporary pool names
Originally, users had to handle spa namespace collisions by either
exporting the already imported pool or by specifying a new name for the
pool with a conflicting name. In the case of root pools from virtual
guests, neither approach to collision resolution is reasonable. This is
addressed by extending the new name syntax with a -t option to specify
that the new name is temporary. When specified, this sets an internal
flag that is passed into the kernel to tell it that all label updates
should refer to the name used in the original label. Consequently, the
original pool name will be retained on export.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2189
2014-03-20 12:05:30 -07:00
Richard Yao 4f2dcb3eee Add erratum for issue #2094
ZoL commit 1421c89 unintentionally changed the disk format in a forward-
compatible, but not backward compatible way. This was accomplished by
adding an entry to zbookmark_t, which is included in a couple of
on-disk structures. That lead to the creation of pools with incorrect
dsl_scan_phys_t objects that could only be imported by versions of ZoL
containing that commit.  Such pools cannot be imported by other versions
of ZFS or past versions of ZoL.

The additional field has been removed by the previous commit.  However,
affected pools must be imported and scrubbed using a version of ZoL with
this commit applied.  This will return the pools to a state in which they
may be imported by other implementations.

The 'zpool import' or 'zpool status' command can be used to determine if
a pool is impacted.  A message similar to one of the following means your
pool must be scrubbed to restore compatibility.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #1 detected.
 action: The pool can be imported using its name or numeric identifier,
         however there is a compatibility issue which should be corrected
         by running 'zpool scrub'
    see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

$ zpool status
  pool: zol-0.6.2-173
 state: ONLINE
  scan: pool compatibility issue detected.
   see: https://github.com/zfsonlinux/zfs/issues/2094
action: To correct the issue run 'zpool scrub'.
config:
...

If there was an async destroy in progress 'zpool import' will prevent
the pool from being imported.  Further advice on how to proceed will be
provided by the error message as follows.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #2 detected.
 action: The pool can not be imported with this version of ZFS due to an
         active asynchronous destroy.  Revert to an earlier version and
         allow the destroy to complete before updating.
         see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

Pools affected by the damaged dsl_scan_phys_t can be detected prior to
an upgrade by running the following command as root:

zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w

Note that `poolname` must be replaced with the name of the pool you wish
to check. A value of 25 indicates the dsl_scan_phys_t has been damaged.
A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0
indicates that there has never been a scrub run on the pool.

The regression caused by the change to zbookmark_t never made it into a
tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL
stable respositorys.  Only those using the HEAD version directly from
Github after the 0.6.2 but before the 0.6.3 tag are affected.

This patch does have one limitation that should be mentioned.  It will not
detect errata #2 on a pool unless errata #1 is also present.  It expected
this will not be a significant problem because pools impacted by errata #2
have a high probably of being impacted by errata #1.

End users can ensure they do no hit this unlikely case by waiting for all
asynchronous destroy operations to complete before updating ZoL.  The
presence of any background destroys on any imported pools can be checked
by running `zpool get freeing` as root.  This will display a non-zero
value for any pool with an active asynchronous destroy.

Lastly, it is expected that no user data has been lost as a result of
this erratum.

Original-patch-by: Tim Chase <tim@chase2k.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2094
2014-02-21 12:10:40 -08:00
Brian Behlendorf ffe9d38275 Add generic errata infrastructure
From time to time it may be necessary to inform the pool administrator
about an errata which impacts their pool.  These errata will by shown
to the administrator through the 'zpool status' and 'zpool import'
output as appropriate.  The errata must clearly describe the issue
detected, how the pool is impacted, and what action should be taken
to resolve the situation.  Additional information for each errata will
be provided at http://zfsonlinux.org/msg/ZFS-8000-ER.

To accomplish the above this patch adds the required infrastructure to
allow the kernel modules to notify the utilities that an errata has
been detected.  This is done through the ZPOOL_CONFIG_ERRATA uint64_t
which has been added to the pool configuration nvlist.

To add a new errata the following changes must be made:

* A new errata identifier must be assigned by adding a new enum value
  to the zpool_errata_t type.  New enums must be added to the end to
  preserve the existing ordering.

* Code must be added to detect the issue.  This does not strictly
  need to be done at pool import time but doing so will make the
  errata visible in 'zpool import' as well as 'zpool status'.  Once
  detected the spa->spa_errata member should be set to the new enum.

* If possible code should be added to clear the spa->spa_errata member
  once the errata has been resolved.

* The show_import() and status_callback() functions must be updated
  to include an informational message describing the errata.  This
  should include an action message describing what an administrator
  should do to address the errata.

* The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be
  updated to describe the errata.  This space can be used to provide
  as much additional information as needed to fully describe the errata.
  A link to this documentation will be automatically generated in the
  output of 'zpool import' and 'zpool status'.

Original-idea-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.or
Issue #2094
2014-02-21 12:10:40 -08:00
Tim Chase 6d111134c0 Implement relatime.
Add the "relatime" property.  When set to "on", a file's atime will only
be updated if the existing atime at least a day old or if the existing
ctime or mtime has been updated since the last access.  This behavior
is compatible with the Linux "relatime" mount option.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2064
Closes #1917
2014-01-29 15:50:44 -08:00
Matthew Thode 11b9ec23b9 Add full SELinux support
Four new dataset properties have been added to support SELinux.  They
are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map
directly to the context options described in mount(8).  When one of
these properties is set to something other than 'none'.  That string
will be passed verbatim as a mount option for the given context when
the filesystem is mounted.

For example, if you wanted the rootcontext for a filesystem to be set
to 'system_u:object_r:fs_t' you would set the property as follows:

  $ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media

This will ensure the filesystem is automatically mounted with that
rootcontext.  It is equivalent to manually specifying the rootcontext
with the -o option like this:

  $ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media

By default all four contexts are set to 'none'.  Further information
on SELinux contexts is detailed in mount(8) and selinux(8) man pages.

Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #1504
2013-12-19 10:37:31 -08:00
Michael Kjorling d1d7e2689d cstyle: Resolve C style issues
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written.  Others were
caused when the common code was slightly adjusted for Linux.

This patch contains no functional changes.  It only refreshes
the code to conform to style guide.

Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request.  The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1821
2013-12-18 16:46:35 -08:00
Brian Behlendorf 2e0358cbca Sync /dev/zfs ioctl ordering
In order to minimize any future disruption caused by the addition
and removal /dev/zfs ioctls this patch makes the following changes.

1) Sync ZoL's ioctl ordering such that it matches Illumos.  For
   historic reasons the ZFS_IOC_DESTROY_SNAPS and ZFS_IOC_POOL_REGUID
   ioctls were out of order.

2) Move Linux and FreeBSD specific ioctls in to their own reserved
   ranges.  This allows us to preserve the existing ordering when
   new ioctls are added by either Illumos or FreeBSD.  When an
   ioctl is no longer needed it should be retired in place.

This change alters the ZFS user/kernel ABI so make sure you rebuild
both your user and kernel modules.  However, it should allow for a
much stabler interface going forward.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #1973
2013-12-16 09:41:39 -08:00
Brian Behlendorf ba6a24026c Remove ZFC_IOC_*_MINOR ioctl()s
Early versions of ZFS coordinated the creation and destruction
of device minors from userspace.  This was inherently racy and
in late 2009 these ioctl()s were removed leaving everything up
to the kernel.  This significantly simplified the code.

However, we never picked up these changes in ZoL since we'd
already significantly adjusted this code for Linux.  This patch
aims to rectify that by finally removing ZFC_IOC_*_MINOR ioctl()s
and moving all the functionality down in to the kernel.  Since
this cleanup will change the kernel/user ABI it's being done
in the same tag as the previous libzfs_core ABI changes.  This
will minimize, but not eliminate, the disruption to end users.

Once merged ZoL, Illumos, and FreeBSD will basically be back
in sync in regards to handling ZVOLs in the common code.  While
each platform must have its own custom zvol.c implemenation the
interfaces provided are consistent.

NOTES:

1) This patch introduces one subtle change in behavior which
   could not be easily avoided.  Prior to this change callers
   of 'zfs create -V ...' were guaranteed that upon exit the
   /dev/zvol/ block device link would be created or an error
   returned.  That's no longer the case.  The utilities will no
   longer block waiting for the symlink to be created.  Callers
   are now responsible for blocking, this is why a 'udev_wait'
   call was added to the 'label' function in scripts/common.sh.

2) The read-only behavior of a ZVOL now solely depends on if
   the ZVOL_RDONLY bit is set in zv->zv_flags.  The redundant
   policy setting in the gendisk structure was removed.  This
   both simplifies the code and allows us to safely leverage
   set_disk_ro() to issue a KOBJ_CHANGE uevent.  See the
   comment in the code for futher details on this.

3) Because __zvol_create_minor() and zvol_alloc() may now be
   called in a sync task they must use KM_PUSHPAGE.

References:
  illumos/illumos-gate@681d9761e8

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #1969
2013-12-16 09:15:57 -08:00
George Wilson 5d1f7fb647 Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962
3956 ::vdev -r should work with pipelines
3957 ztest should update the cachefile before killing itself
3958 multiple scans can lead to partial resilvering
3959 ddt entries are not always resilvered
3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth
3961 freed gang blocks are not resilvered and can cause pool to suspend
3962 ztest should print out zfs debug buffer before exiting
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/3956
  https://www.illumos.org/issues/3957
  https://www.illumos.org/issues/3958
  https://www.illumos.org/issues/3959
  https://www.illumos.org/issues/3960
  https://www.illumos.org/issues/3961
  https://www.illumos.org/issues/3962
  illumos/illumos-gate@b4952e17e8

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting notes:

1. zfs_dbgmsg_print() is only used in userland. Since we do not have
   mdb on Linux, it does not make sense to make it available in the
   kernel. This means that a build failure will occur if any future
   kernel patch depends on it. However, that is unlikely given that
   this functionality was added to support zdb.

2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels.
   This preserves the existing behavior of minimal noise when running
   with -V, and -VV.

3. In vdev_config_generate() the call to nvlist_alloc() was not
   changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in
   the txg_sync context.
2013-11-05 12:23:05 -08:00
Keith M Wesolowski 96c2e96193 Illumos #3894
3894 zfs should not allow snapshot of inconsistent dataset
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  https://www.illumos.org/issues/3894
  illumos/illumos-gate@ca48f36f20

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
2013-11-04 11:18:14 -08:00
Matthew Ahrens 24a64651b4 Illumos #3588
3588 provide zfs properties for logical (uncompressed) space
     used and referenced
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@dey-sys.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/3588
  illumos/illumos-gate@77372cb0f3

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-10-31 10:16:11 -07:00
Massimo Maggi 023699cd62 Posix ACL Support
This change adds support for Posix ACLs by storing them as an xattr
which is common practice for many Linux file systems.  Since the
Posix ACL is stored as an xattr it will not overwrite any existing
ZFS/NFSv4 ACLs which may have been set.  The Posix ACL will also
be non-functional on other platforms although it may be visible
as an xattr if that platform understands SA based xattrs.

By default Posix ACLs are disabled but they may be enabled with
the new 'aclmode=noacl|posixacl' property.  Set the property to
'posixacl' to enable them.  If ZFS/NFSv4 ACL support is ever added
an appropriate acltype will be added.

This change passes the POSIX Test Suite cleanly with the exception
of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too).

  http://www.tuxera.com/community/posix-test-suite/

Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #170
2013-10-29 14:54:26 -07:00
Matthew Ahrens 6f1ffb0665 Illumos #2882, #2883, #2900
2882 implement libzfs_core
2883 changing "canmount" property to "on" should not always remount dataset
2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2882
  https://www.illumos.org/issues/2883
  https://www.illumos.org/issues/2900
  illumos/illumos-gate@4445fffbbb

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1293

Porting notes:

WARNING: This patch changes the user/kernel ABI.  That means that
the zfs/zpool utilities built from master are NOT compatible with
the 0.6.2 kernel modules.  Ensure you load the matching kernel
modules from master after updating the utilities.  Otherwise the
zfs/zpool commands will be unable to interact with your pool and
you will see errors similar to the following:

  $ zpool list
  failed to read pool configuration: bad address
  no pools available

  $ zfs list
  no datasets available

Add zvol minor device creation to the new zfs_snapshot_nvl function.

Remove the logging of the "release" operation in
dsl_dataset_user_release_sync().  The logging caused a null dereference
because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the
logging functions try to get the ds name via the dsl_dataset_name()
function. I've got no idea why this particular code would have worked
in Illumos.  This code has subsequently been completely reworked in
Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring).

Squash some "may be used uninitialized" warning/erorrs.

Fix some printf format warnings for %lld and %llu.

Apply a few spa_writeable() changes that were made to Illumos in
illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and
3115 fixes.

Add a missing call to fnvlist_free(nvl) in log_internal() that was added
in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time
(zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-09-04 15:49:00 -07:00
Shen Yan e77aa730bc Fix the comment in zfs.h
The path to code is also changed in zfsonlinux.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issues #1566
2013-07-09 10:41:18 -07:00
Eric Dillmann 0b4d1b5853 Add snapdev=[hidden|visible] dataset property
The new snapdev dataset property may be set to control the
visibility of zvol snapshot devices.  By default this value
is set to 'hidden' which will prevent zvol snapshots from
appearing under /dev/zvol/ and /dev/<dataset>/.  When set to
'visible' all zvol snapshots for the dataset will be visible.

This functionality was largely added because when automatic
snapshoting is enabled large numbers of read-only zvol snapshots
will be created.  When creating these devices the kernel will
attempt to read their partition tables, and blkid will attempt
to identify any filesystems on those partitions.  This leads
to a variety of issues:

1) The zvol partition tables will be read in the context of
   the `modprobe zfs` for automatically imported pools.  This
   is undesirable and should be done asynchronously, but for
   now reducing the number of visible devices helps.

2) Udev expects to be able to complete its work for a new
   block devices fairly quickly.  When many zvol devices are
   added at the same time this is no longer be true.  It can
   lead to udev timeouts and missing /dev/zvol links.

3) Simply having lots of devices in /dev/ can be aukward from
   a management standpoint.  Hidding the devices your unlikely
   to ever use helps with this.  Any snapshot device which is
   needed can be made visible by changing the snapdev property.

NOTE: This patch changes the default behavior for zvols which
      was effectively 'snapdev=visible'.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1235
Closes #945
Issue #956
Issue #756
2013-03-05 12:37:54 -08:00
Christopher Siden b9b24bb4ca Illumos #2762: zpool command should have better support for feature flags
2762 zpool command should have better support for feature flags
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@57221772c3
  https://www.illumos.org/issues/2762

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:43 -08:00
George Wilson 3bc7e0fb0f Illumos #3090 and #3102
3090 vdev_reopen() during reguid causes vdev to be treated as corrupt
3102 vdev_uberblock_load() and vdev_validate() may read the wrong label

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@dfbb943217
  illumos changeset: 13777:b1e53580146d
  https://www.illumos.org/issues/3090
  https://www.illumos.org/issues/3102

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #939
2013-01-08 10:35:42 -08:00
Christopher Siden 9ae529ec5d Illumos #2619 and #2747
2619 asynchronous destruction of ZFS file systems
2747 SPA versioning with zfs feature flags
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@53089ab7c8
  illumos/illumos-gate@ad135b5d64
  illumos changeset: 13700:2889e2596bd6
  https://www.illumos.org/issues/2619
  https://www.illumos.org/issues/2747

NOTE: The grub specific changes were not ported.  This change
must be made to the Linux grub packages.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:35 -08:00
Bill Pijewski 37abac6d55 Illumos #2703: add mechanism to report ZFS send progress
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2703

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-19 13:39:06 -07:00
Chris Siden 1bd201e70d Illumos #1948: zpool list should show more detailed pool info
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Eric Schrock <eric.schrock@delphix.com>

References:
  https://www.illumos.org/issues/1948

Ported by:	Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #685
2012-09-19 13:39:05 -07:00
Dan McDonald d96eb2b153 Illumos #1693: persistent 'comment' field for a zpool
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1693

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #678
2012-08-08 11:49:37 -07:00
Matthew Ahrens 330d06f90d Illumos #1644, #1645, #1646, #1647, #1708
1644 add ZFS "clones" property
1645 add ZFS "written" and "written@..." properties
1646 "zfs send" should estimate size of stream
1647 "zfs destroy" should determine space reclaimed by
     destroying multiple snapshots
1708 adjust size of zpool history data

References:
  https://www.illumos.org/issues/1644
  https://www.illumos.org/issues/1645
  https://www.illumos.org/issues/1646
  https://www.illumos.org/issues/1647
  https://www.illumos.org/issues/1708

This commit modifies the user to kernel space ioctl ABI.  Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated.  This change has reordered
all of the new ioctl()s to the end of the list.  This should
help minimize this issue in the future.

Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Albert Lee <trisk@opensolaris.org>
Approved by: Garrett D'Amore <garret@nexenta.com>

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #826
Closes #664
2012-07-31 09:25:30 -07:00
Garrett D'Amore 3541dc6d02 Illumos #1748: desire support for reguid in zfs
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com>
Reviewed by: Alexander Stetsenko <ams@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1748

This commit modifies the user to kernel space ioctl ABI.  Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated.  If only the user space
component is updated both the 'zpool events' command and the
'zpool reguid' command will not work until the kernel modules
are updated.

Ported by:     Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #665
2012-07-11 13:08:56 -07:00
Brian Behlendorf 82a37189aa Implement SA based xattrs
The current ZFS implementation stores xattrs on disk using a hidden
directory.  In this directory a file name represents the xattr name
and the file contexts are the xattr binary data.  This approach is
very flexible and allows for arbitrarily large xattrs.  However,
it also suffers from a significant performance penalty.  Accessing
a single xattr can requires up to three disk seeks.

  1) Lookup the dnode object.
  2) Lookup the dnodes's xattr directory object.
  3) Lookup the xattr object in the directory.

To avoid this performance penalty Linux filesystems such as ext3
and xfs try to store the xattr as part of the inode on disk.  When
the xattr is to large to store in the inode then a single external
block is allocated for them.  In practice most xattrs are small
and this approach works well.

The addition of System Attributes (SA) to zfs provides us a clean
way to make this optimization.  When the dataset property 'xattr=sa'
is set then xattrs will be preferentially stored as System Attributes.
This allows tiny xattrs (~100 bytes) to be stored with the dnode and
up to 64k of xattrs to be stored in the spill block.  If additional
xattr space is required, which is unlikely under Linux, they will be
stored using the traditional directory approach.

This optimization results in roughly a 3x performance improvement
when accessing xattrs which brings zfs roughly to parity with ext4
and xfs (see table below).  When multiple xattrs are stored per-file
the performance improvements are even greater because all of the
xattrs stored in the spill block will be cached.

However, by default SA based xattrs are disabled in the Linux port
to maximize compatibility with other implementations.  If you do
enable SA based xattrs then they will not be visible on platforms
which do not support this feature.

----------------------------------------------------------------------
   Time in seconds to get/set one xattr of N bytes on 100,000 files
------+--------------------------------+------------------------------
      |            setxattr            |            getxattr
bytes |  ext4     xfs zfs-dir  zfs-sa  |  ext4     xfs zfs-dir  zfs-sa
------+--------------------------------+------------------------------
1     |  2.33   31.88   21.50    4.57  |  2.35    2.64    6.29    2.43
32    |  2.79   30.68   21.98    4.60  |  2.44    2.59    6.78    2.48
256   |  3.25   31.99   21.36    5.92  |  2.32    2.71    6.22    3.14
1024  |  3.30   32.61   22.83    8.45  |  2.40    2.79    6.24    3.27
4096  |  3.57  317.46   22.52   10.73  |  2.78   28.62    6.90    3.94
16384 |   n/a 2342.39   34.30   19.20  |   n/a   45.44  145.90    7.55
65536 |   n/a 2941.39  128.15  131.32* |   n/a  141.92  256.85  262.12*

Legend:
* ext4      - Stock RHEL6.1 ext4 mounted with '-o user_xattr'.
* xfs       - Stock RHEL6.1 xfs mounted with default options.
* zfs-dir   - Directory based xattrs only.
* zfs-sa    - Prefer SAs but spill in to directories as needed, a
              trailing * indicates overflow in to directories occured.

NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file.
NOTE: XFS and ZFS have no limit on xattr name/value pairs per file.
NOTE: Linux limits individual name/value pairs to 65536 bytes.
NOTE: All setattr/getattr's were done after dropping the cache.
NOTE: All tests were run against a single hard drive.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #443
2011-11-28 15:45:51 -08:00
Matt Ahrens f5fc4acaa7 Illumos #1092: zfs refratio property
Add a "REFRATIO" property, which is the compression ratio based on
data referenced. For snapshots, this is the same as COMPRESSRATIO,
but for filesystems/volumes, the COMPRESSRATIO is based on the
data "USED" (ie, includes blocks in children, but not blocks
shared with the origin).

This is needed to figure out how much space a filesystem would
use if it were not compressed (ignoring snapshots).

Reviewed by: George Wilson <George.Wilson@delphix.com>
Reviewed by: Adam Leventhal <Adam.Leventhal@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Mark Musante <Mark.Musante@oracle.com>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Approved by: Garrett D'Amore <garrett@nexenta.com>

References to Illumos issue and patch:
- https://www.illumos.org/issues/1092
- https://github.com/illumos/illumos-gate/commit/187d6ac08a

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #340
2011-08-01 12:09:11 -07:00
Christian Kohlschütter df30f56639 Add "ashift" property to zpool create
Some disks with internal sectors larger than 512 bytes (e.g., 4k) can
suffer from bad write performance when ashift is not configured
correctly.  This is caused by the disk not reporting its actual sector
size, but a sector size of 512 bytes.  The drive may behave this way
for compatibility reasons.  For example, the WDC WD20EARS disks are
known to exhibit this behavior.

When creating a zpool, ZFS takes that wrong sector size and sets the
"ashift" property accordingly (to 9: 1<<9=512), whereas it should be
set to 12 for 4k sectors (1<<12=4096).

This patch allows an adminstrator to manual specify the known correct
ashift size at 'zpool create' time.  This can significantly improve
performance in certain cases.  However, it will have an impact on your
total pool capacity.  See the updated ashift property description
in the zpool.8 man page for additional details.

Valid values for the ashift property range from 9 to 17 (512B-128KB).
Additionally, you may set the ashift to 0 if you wish to auto-detect
the sector size based on what the disk reports, this is the default
behavior.  The most common ashift values are 9 and 12.

  Example:
  zpool create -o ashift=12 tank raidz2 sda sdb sdc sdd

Closes #280

Original-patch-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-06-17 16:35:49 -07:00
Fajar A. Nugraha a5729f7b22 Fixes to enable zvol symlink creation
This commit fixes issue on
https://github.com/behlendorf/zfs/issues/#issue/172
Changes:
- update BLKZNAME to use _IOR instead of _IO.  Kernel 2.6.32 allows
read parameters (copy_to_user) with _IO, while newer kernels (tested
Archlinux's 2.6.37 kernel) enforces _IOR (which is correct)
- fix return code and message on error

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-24 11:48:18 -07:00
Fajar A. Nugraha 4c0d8e50b9 Use udev to create /dev/zvol/[dataset_name] links
This commit allows zvols with names longer than 32 characters, which
fixes issue on https://github.com/behlendorf/zfs/issues/#issue/102.

Changes include:
- use /dev/zd* device names for zvol, where * is the device minor
  (include/sys/fs/zfs.h, module/zfs/zvol.c).
- add BLKZNAME ioctl to get dataset name from userland
  (include/sys/fs/zfs.h, module/zfs/zvol.c, cmd/zvol_id).
- add udev rule to create /dev/zvol/[dataset_name] and the legacy
  /dev/[dataset_name] symlink. For partitions on zvol, it will create
  /dev/zvol/[dataset_name]-part* (etc/udev/rules.d/60-zvol.rules,
  cmd/zvol_id).

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-02-25 09:43:19 -08:00
Brian Behlendorf 6283f55ea1 Support custom build directories and move includes
One of the neat tricks an autoconf style project is capable of
is allow configurion/building in a directory other than the
source directory.  The major advantage to this is that you can
build the project various different ways while making changes
in a single source tree.

For example, this project is designed to work on various different
Linux distributions each of which work slightly differently.  This
means that changes need to verified on each of those supported
distributions perferably before the change is committed to the
public git repo.

Using nfs and custom build directories makes this much easier.
I now have a single source tree in nfs mounted on several different
systems each running a supported distribution.  When I make a
change to the source base I suspect may break things I can
concurrently build from the same source on all the systems each
in their own subdirectory.

wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz
tar -xzf zfs-x.y.z.tar.gz
cd zfs-x-y-z

------------------------- run concurrently ----------------------
<ubuntu system>  <fedora system>  <debian system>  <rhel6 system>
mkdir ubuntu     mkdir fedora     mkdir debian     mkdir rhel6
cd ubuntu        cd fedora        cd debian        cd rhel6
../configure     ../configure     ../configure     ../configure
make             make             make             make
make check       make check       make check       make check

This change also moves many of the include headers from individual
incude/sys directories under the modules directory in to a single
top level include directory.  This has the advantage of making
the build rules cleaner and logically it makes a bit more sense.
2010-09-08 12:38:56 -07:00