There are two common locations where udev and dracut components are
commonly installed. When building packages using the 'make rpm|deb'
targets check those common locations and pass them to rpmbuild. For
non-standard configurations these values can be provided by the
the following configure options:
--with-udevdir=DIR install udev helpers [default=check]
--with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]]
--with-dracutdir=DIR install dracut helpers [default=check]
When rebuilding using the source packages the per-distribution
default values specified in the spec file will be used. This is
the preferred way to build packages for a distribution but the
ability to override the defaults is provided as a convenience.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2310Closes#1680
This adds ability to set the location of the kernel via defines
when building from the spec files. This is useful when building
against a kernel installed in a non-standard location.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1874
GCC >+ 4.8's aggressive loop optimization breaks some of the iterators
over the dn_blkptr[] pseudo-array in dnode_phys. Since dn_blkptr[] is
defined as a single-element array, GCC believes an iterator can only
access index 0 and will unroll the loop into a single iteration.
One way to resolve the issue would be to cast the array to a pointer
and fix all the iterators that might break. The only loop where it
is known to cause a problem is this loop in dmu_objset_write_ready():
for (i = 0; i < dnp->dn_nblkptr; i++)
bp->blk_fill += dnp->dn_blkptr[i].blk_fill;
In the common case where dn_nblkptr is 3, the loop is only executed a
single time and "i" is equal to 1 following the loop.
The specific breakage caused by this problem is that the blk_fill of
root block pointers wouldn't be set properly when more than one blkptr
is in use (when no indrect blocks are needed).
The simple reproducing sequence is:
zpool create tank /tank.img
zdb -ddddd tank 0
Notice that "fill=31", however, there are two L0 indirect blocks with
"F=31" and "F=5". The fill count should be 36 rather than 31. This
problem causes an assert to be hit in a simple "zdb tank" when built
with --enable-debug.
However, this approach was not taken because we need to be absolutely
sure we catch all instances of this unwanted optimization. Therefore,
the build system has been updated to detect if GCC supports the
aggressive loop optimization. If it does the optimization will be
explicitly disabled using the -fno-aggressive-loop-optimization option.
Original-fix-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2010Closes#2051
When the kmod packaging was introduced the ability to pass the
--enable-debug and --enable-dmu-tx options from configure all
the way through to `make rpm|deb` was accidenally lost. Update
ZFS_AC_RPM to explicitlu set RPM_DEFINE_COMMON with these
rpmbuild defines.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1402
Refresh the existing RPM packaging to conform to the 'Fedora
Packaging Guidelines'. This includes adopting the kmods2
packaging standard which is used fod kmods distributed by
rpmfusion for Fedora/RHEL.
http://fedoraproject.org/wiki/Packaging:Guidelineshttp://rpmfusion.org/Packaging/KernelModules/Kmods2
While the spec files have been entirely rewritten from a
user perspective the only major changes are:
* The Fedora packages now have a build dependency on the
rpmfusion repositories. The generic kmod packages also
have a new dependency on kmodtool-1.22 but it is bundled
with the source rpm so no additional packages are needed.
* The kernel binary module packages have been renamed from
zfs-modules-* to kmod-zfs-* as specificed by kmods2.
* The is now a common kmod-zfs-devel-* package in addition
to the per-kernel devel packages. The common package
contains the development headers while the per-kernel
package contains kernel specific build products.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1341
The kernel modules are now available in the Arch User Repository
(AUR) via zfs. Since their packaging is maintained and superior
to ours it is being removed from the tree.
https://wiki.archlinux.org/index.php/ZFS
Now that various distributions are picking up the packages we
should eventually be able to remove most of this infrastructure.
Packaging belongs with the distributions not upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This patch adds a new option to configure: --enable-linux-builtin. When
this option is used, the following happens:
- Compilation of kernel modules is disabled.
- A failure to find UTS_RELEASE is followed by a suggestion to run
"make prepare" on the kernel source tree.
This patch also adds a new test which tries to compile an empty module
as a basic toolchain sanity test. If it fails and the option was
specified, the error is followed by a suggestion to run "make scripts"
on the kernel source tree.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
Allow rigorous (and expensive) tx validation to be enabled/disabled
indepentantly from the standard zfs debugging. When enabled these
checks ensure that all txs are constructed properly and that a dbuf
is never dirtied without taking the correct tx hold.
This checking is particularly helpful when adding new dmu consumers
like Lustre. However, for established consumers such as the zpl
with no known outstanding tx construction problems this is just
overhead.
--enable-debug-dmu-tx - Enable/disable validation of each tx as
--disable-debug-dmu-tx it is constructed. By default validation
is disabled due to performance concerns.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Improve the distribution detection by moving the tests for
distribution specific files first. The Ubuntu and Debian
checks are left for last because they are the least likely
to be unique. This is particularly true in the case of Debian
since so many distributions are based on Debian.
Since this is currently only used to identify the correct
packaging method for this system the result in many instances
is simply cosmetic.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Allow a source rpm to be rebuilt with debugging enabled. This
avoids the need to have to manually modify the spec file. By
default debugging is still largely disabled. To enable specific
debugging features use the following options with rpmbuild.
'--with debug' - Enables ASSERTs
# For example:
$ rpmbuild --rebuild --with debug zfs-modules-0.6.0-rc6.src.rpm
Additionally, ZFS_CONFIG has been added to zfs_config.h for
packages which build against these headers. This is critical
to ensure both zfs and the dependant package are using the same
prototype and structure definitions.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Unfortunately, Arch's package manager `pacman` shares it's name with a
popular arcade video game. Thus, in order to refrain from executing the
video game when we mean to execute the package manager, ZFS_AC_PACMAN is
now only run when $VENDOR is determined to be "arch".
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#517
If the lsb-release package is installed on an Arch Linux distribution,
the configure step will incorrectly detect the running distribution as
Ubuntu. This is a result of both distributions providing an
/etc/lsb-release file, and the Ubuntu VENDOR check being performed
first.
Since the Arch Linux test check's for a file more specific to the Arch
Linux distribution, moving Arch Linux's VENDOR check above Unbuntu's
check provides a quick and easy solution.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Added the necessary build infrastructure for building packages
compatible with the Arch Linux distribution. As such, one can now run:
$ ./configure
$ make pkg # Alternatively, one can run 'make arch' as well
on the Arch Linux machine to create two binary packages compatible with
the pacman package manager, one for the zfs userland utilities and
another for the zfs kernel modules. The new packages can then be
installed by running:
# pacman -U $package.pkg.tar.xz
In addition, source-only packages suitable for an Arch Linux chroot
environment or remote builder can also be build using the 'sarch' make
rule.
NOTE: Since the source dist tarball is created on the fly from the head
of the build tree, it's MD5 hash signature will be continually influx.
As a result, the md5sum variable was intentionally omitted from the
PKGBUILD files, and the '--skipinteg' makepkg option is used. This may
or may not have any serious security implications, as the source tarball
is not being downloaded from an outside source.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#491
Unlike most other Linux distributions archlinux installs its
init scripts in /etc/rc.d insead of /etc/init.d. This commit
provides an archlinux rc.d script for zfs and extends the
build infrastructure to ensure it get's installed in the
correct place.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#322
The previous commit 8a7e1ceefa wasn't
quite right. This check applies to both the user and kernel space
build and as such we must make sure it runs regardless of what
the --with-config option is set too.
For example, if --with-config=kernel then the autoconf test does
not run and we generate build warnings when compiling the kernel
packages.
Every distribution has slightly different requirements for their
init scripts. Because of this the zfs package contains several
init scripts for various distributions. These scripts have been
contributed by, and are supported by, the larger zfs community.
Init scripts for Gentoo/Lunar/Redhat have been contributed by:
Gentoo - devsk <devsku@gmail.com>
Lunar - Jean-Michel Bruenn <jean.bruenn@ip-minds.de>
Redhat - Fajar A. Nugraha <list@fajar.net>
To support automatically mounting your zfs on filesystem on boot
a basic init script is needed. Unfortunately, every distribution
has their own idea of the _right_ way to do things. Rather than
write one very complicated portable init script, which would be
invariably replaced by the distributions own anyway. I have
instead added support to provide multiple distribution specific
init scripts.
The correct init script for your distribution will be selected
by ZFS_AC_DEFAULT_PACKAGE which will set DEFAULT_INIT_SCRIPT.
During 'make install' the correct script for your system will
be installed from zfs/etc/init.d/zfs.DEFAULT_INIT_SCRIPT to the
usual /etc/init.d/zfs location.
Currently, there is zfs.fedora and a more generic zfs.lsb init
script. Hopefully, the distribution maintainers who know best
how they want their init scripts to function will feedback their
approved versions to be included in the project.
This change does not consider upstart jobs but I'm not at all
opposed to add that sort of thing.
One of the neat tricks an autoconf style project is capable of
is allow configurion/building in a directory other than the
source directory. The major advantage to this is that you can
build the project various different ways while making changes
in a single source tree.
For example, this project is designed to work on various different
Linux distributions each of which work slightly differently. This
means that changes need to verified on each of those supported
distributions perferably before the change is committed to the
public git repo.
Using nfs and custom build directories makes this much easier.
I now have a single source tree in nfs mounted on several different
systems each running a supported distribution. When I make a
change to the source base I suspect may break things I can
concurrently build from the same source on all the systems each
in their own subdirectory.
wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz
tar -xzf zfs-x.y.z.tar.gz
cd zfs-x-y-z
------------------------- run concurrently ----------------------
<ubuntu system> <fedora system> <debian system> <rhel6 system>
mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6
cd ubuntu cd fedora cd debian cd rhel6
../configure ../configure ../configure ../configure
make make make make
make check make check make check make check
This change also moves many of the include headers from individual
incude/sys directories under the modules directory in to a single
top level include directory. This has the advantage of making
the build rules cleaner and logically it makes a bit more sense.
Add autoconf style build infrastructure to the ZFS tree. This
includes autogen.sh, configure.ac, m4 macros, some scripts/*,
and makefiles for all the core ZFS components.
of the kernel specific build info in to config/kernel,
likewise and user specific build flags should go in
config/user. This seems like a reasonable way to go.
Brian Behlendorf
Turbo Fredriksson
Etienne Dechamps
Richard Yao
Prakash Surya
Kyle Fuller
Alexey Shvetsov