Commit Graph

10 Commits

Author SHA1 Message Date
Tino Reichardt 1d3ba0bf01
Replace dead opensolaris.org license link
The commit replaces all findings of the link:
http://www.opensolaris.org/os/licensing with this one:
https://opensource.org/licenses/CDDL-1.0

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes 
2022-07-11 14:16:13 -07:00
Jitendra Patidar 361a7e8211
log xattr=sa create/remove/update to ZIL
As such, there are no specific synchronous semantics defined for
the xattrs. But for xattr=on, it does log to ZIL and zil_commit() is
done, if sync=always is set on dataset. This provides sync semantics
for xattr=on with sync=always set on dataset.

For the xattr=sa implementation, it doesn't log to ZIL, so, even with
sync=always, xattrs are not guaranteed to be synced before xattr call
returns to caller. So, xattr can be lost if system crash happens, before
txg carrying xattr transaction is synced.

This change adds xattr=sa logging to ZIL on xattr create/remove/update
and xattrs are synced to ZIL (zil_commit() done) for sync=always.
This makes xattr=sa behavior similar to xattr=on.

Implementation notes:
The actual logging is fairly straight-forward and does not warrant
additional explanation.
However, it has been 14 years since we last added new TX types
to the ZIL [1], hence this is the first time we do it after the
introduction of zpool features. Therefore, here is an overview of the
feature activation and deactivation workflow:

1. The feature must be enabled. Otherwise, we don't log the new
    record type. This ensures compatibility with older software.
2. The feature is activated per-dataset, since the ZIL is per-dataset.
3. If the feature is enabled and dataset is not for zvol, any append to
    the ZIL chain will activate the feature for the dataset. Likewise
    for starting a new ZIL chain.
4. A dataset that doesn't have a ZIL chain has the feature deactivated.

We ensure (3) by activating on the first zil_commit() after the feature
was enabled. Since activating the features requires waiting for txg
sync, the first zil_commit() after enabling the feature will be slower
than usual. The downside is that this is really a conservative
approximation: even if we never append a 'TX_SETSAXATTR' to the ZIL
chain, we pay the penalty for feature activation. The upside is that the
user is in control of when we pay the penalty, i.e., upon enabling the
feature.

We ensure (4) by hooking into zil_sync(), where ZIL destroy actually
happens.

One more piece on feature activation, since it's spread across
multiple functions:

zil_commit()
  zil_process_commit_list()
    if lwb == NULL // first zil_commit since zil_open
      zil_create()
        if no log block pointer in ZIL header:
          if feature enabled and not active:
	    // CASE 1
            enable, COALESCE txg wait with dmu_tx that allocated the
	    log block
         else // log block was allocated earlier than this zil_open
          if feature enabled and not active:
	    // CASE 2
            enable, EXPLICIT txg wait
    else // already have an in-DRAM LWB
      if feature enabled and not active:
        // this happens when we enable the feature after zil_create
	// CASE 3
        enable, EXPLICIT txg wait

[1] da6c28aaf6

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes  
Closes 
2022-02-22 13:06:43 -08:00
наб 18168da727
module/*.ko: prune .data, global .rodata
Evaluated every variable that lives in .data (and globals in .rodata)
in the kernel modules, and constified/eliminated/localised them
appropriately. This means that all read-only data is now actually
read-only data, and, if possible, at file scope. A lot of previously-
global-symbols became inlinable (and inlined!) constants. Probably
not in a big Wowee Performance Moment, but hey.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2022-01-14 15:37:55 -08:00
Brian Atkinson d0cd9a5cc6
Extending FreeBSD UIO Struct
In FreeBSD the struct uio was just a typedef to uio_t. In order to
extend this struct, outside of the definition for the struct uio, the
struct uio has been embedded inside of a uio_t struct.

Also renamed all the uio_* interfaces to be zfs_uio_* to make it clear
this is a ZFS interface.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes 
2021-01-20 21:27:30 -08:00
Nasf-Fan 9c5167d19f Project Quota on ZFS
Project quota is a new ZFS system space/object usage accounting
and enforcement mechanism. Similar as user/group quota, project
quota is another dimension of system quota. It bases on the new
object attribute - project ID.

Project ID is a numerical value to indicate to which project an
object belongs. An object only can belong to one project though
you (the object owner or privileged user) can change the object
project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly.
The object also can inherit the project ID from its parent when
created if the parent has the project inherit flag (that can be
set via 'chattr +P' or 'zfs project -s [-p]').

By accounting the spaces/objects belong to the same project, we
can know how many spaces/objects used by the project. And if we
set the upper limit then we can control the spaces/objects that
are consumed by such project. It is useful when multiple groups
and users cooperate for the same project, or a user/group needs
to participate in multiple projects.

Support the following commands and functionalities:

zfs set projectquota@project
zfs set projectobjquota@project

zfs get projectquota@project
zfs get projectobjquota@project
zfs get projectused@project
zfs get projectobjused@project

zfs projectspace

zfs allow projectquota
zfs allow projectobjquota
zfs allow projectused
zfs allow projectobjused

zfs unallow projectquota
zfs unallow projectobjquota
zfs unallow projectused
zfs unallow projectobjused

chattr +/-P
chattr -p project_id
lsattr -p

This patch also supports tree quota based on the project quota via
"zfs project" commands set as following:
zfs project [-d|-r] <file|directory ...>
zfs project -C [-k] [-r] <file|directory ...>
zfs project -c [-0] [-d|-r] [-p id] <file|directory ...>
zfs project [-p id] [-r] [-s] <file|directory ...>

For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on
the $DIR, then the proejct [obj]quota and [obj]used values for the
$DIR's project ID will be shown as the total/free (avail) resource.
Keep the same behavior as EXT4/XFS does.

Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by  Ned Bass <bass6@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fan Yong <fan.yong@intel.com>
TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master"
Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c
Closes 
2018-02-13 14:54:54 -08:00
Matthew Ahrens f1512ee61e Illumos 5027 - zfs large block support
5027 zfs large block support
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5027
  https://github.com/illumos/illumos-gate/commit/b515258

Porting Notes:

* Included in this patch is a tiny ISP2() cleanup in zio_init() from
Illumos 5255.

* Unlike the upstream Illumos commit this patch does not impose an
arbitrary 128K block size limit on volumes.  Volumes, like filesystems,
are limited by the zfs_max_recordsize=1M module option.

* By default the maximum record size is limited to 1M by the module
option zfs_max_recordsize.  This value may be safely increased up to
16M which is the largest block size supported by the on-disk format.
At the moment, 1M blocks clearly offer a significant performance
improvement but the benefits of going beyond this for the majority
of workloads are less clear.

* The illumos version of this patch increased DMU_MAX_ACCESS to 32M.
This was determined not to be large enough when using 16M blocks
because the zfs_make_xattrdir() function will fail (EFBIG) when
assigning a TX.  This was immediately observed under Linux because
all newly created files must have a security xattr created and
that was failing.  Therefore, we've set DMU_MAX_ACCESS to 64M.

* On 32-bit platforms a hard limit of 1M is set for blocks due
to the limited virtual address space.  We should be able to relax
this one the ABD patches are merged.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2015-05-11 12:23:16 -07:00
Michael Kjorling d1d7e2689d cstyle: Resolve C style issues
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written.  Others were
caused when the common code was slightly adjusted for Linux.

This patch contains no functional changes.  It only refreshes
the code to conform to style guide.

Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request.  The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2013-12-18 16:46:35 -08:00
Brian Behlendorf 82a37189aa Implement SA based xattrs
The current ZFS implementation stores xattrs on disk using a hidden
directory.  In this directory a file name represents the xattr name
and the file contexts are the xattr binary data.  This approach is
very flexible and allows for arbitrarily large xattrs.  However,
it also suffers from a significant performance penalty.  Accessing
a single xattr can requires up to three disk seeks.

  1) Lookup the dnode object.
  2) Lookup the dnodes's xattr directory object.
  3) Lookup the xattr object in the directory.

To avoid this performance penalty Linux filesystems such as ext3
and xfs try to store the xattr as part of the inode on disk.  When
the xattr is to large to store in the inode then a single external
block is allocated for them.  In practice most xattrs are small
and this approach works well.

The addition of System Attributes (SA) to zfs provides us a clean
way to make this optimization.  When the dataset property 'xattr=sa'
is set then xattrs will be preferentially stored as System Attributes.
This allows tiny xattrs (~100 bytes) to be stored with the dnode and
up to 64k of xattrs to be stored in the spill block.  If additional
xattr space is required, which is unlikely under Linux, they will be
stored using the traditional directory approach.

This optimization results in roughly a 3x performance improvement
when accessing xattrs which brings zfs roughly to parity with ext4
and xfs (see table below).  When multiple xattrs are stored per-file
the performance improvements are even greater because all of the
xattrs stored in the spill block will be cached.

However, by default SA based xattrs are disabled in the Linux port
to maximize compatibility with other implementations.  If you do
enable SA based xattrs then they will not be visible on platforms
which do not support this feature.

----------------------------------------------------------------------
   Time in seconds to get/set one xattr of N bytes on 100,000 files
------+--------------------------------+------------------------------
      |            setxattr            |            getxattr
bytes |  ext4     xfs zfs-dir  zfs-sa  |  ext4     xfs zfs-dir  zfs-sa
------+--------------------------------+------------------------------
1     |  2.33   31.88   21.50    4.57  |  2.35    2.64    6.29    2.43
32    |  2.79   30.68   21.98    4.60  |  2.44    2.59    6.78    2.48
256   |  3.25   31.99   21.36    5.92  |  2.32    2.71    6.22    3.14
1024  |  3.30   32.61   22.83    8.45  |  2.40    2.79    6.24    3.27
4096  |  3.57  317.46   22.52   10.73  |  2.78   28.62    6.90    3.94
16384 |   n/a 2342.39   34.30   19.20  |   n/a   45.44  145.90    7.55
65536 |   n/a 2941.39  128.15  131.32* |   n/a  141.92  256.85  262.12*

Legend:
* ext4      - Stock RHEL6.1 ext4 mounted with '-o user_xattr'.
* xfs       - Stock RHEL6.1 xfs mounted with default options.
* zfs-dir   - Directory based xattrs only.
* zfs-sa    - Prefer SAs but spill in to directories as needed, a
              trailing * indicates overflow in to directories occured.

NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file.
NOTE: XFS and ZFS have no limit on xattr name/value pairs per file.
NOTE: Linux limits individual name/value pairs to 65536 bytes.
NOTE: All setattr/getattr's were done after dropping the cache.
NOTE: All tests were run against a single hard drive.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue 
2011-11-28 15:45:51 -08:00
Brian Behlendorf e45aa45298 Export symbols for the full SA API
Export all the symbols for the system attribute (SA) API.  This
allows external module to cleanly manipulate the SAs associated
with a dnode.  Documention for the SA API can be found in the
module/zfs/sa.c source.

This change also removes the zfs_sa_uprade_pre, and
zfs_sa_uprade_post prototypes.  The functions themselves were
dropped some time ago.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-10-05 15:59:56 -07:00
Brian Behlendorf 6283f55ea1 Support custom build directories and move includes
One of the neat tricks an autoconf style project is capable of
is allow configurion/building in a directory other than the
source directory.  The major advantage to this is that you can
build the project various different ways while making changes
in a single source tree.

For example, this project is designed to work on various different
Linux distributions each of which work slightly differently.  This
means that changes need to verified on each of those supported
distributions perferably before the change is committed to the
public git repo.

Using nfs and custom build directories makes this much easier.
I now have a single source tree in nfs mounted on several different
systems each running a supported distribution.  When I make a
change to the source base I suspect may break things I can
concurrently build from the same source on all the systems each
in their own subdirectory.

wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz
tar -xzf zfs-x.y.z.tar.gz
cd zfs-x-y-z

------------------------- run concurrently ----------------------
<ubuntu system>  <fedora system>  <debian system>  <rhel6 system>
mkdir ubuntu     mkdir fedora     mkdir debian     mkdir rhel6
cd ubuntu        cd fedora        cd debian        cd rhel6
../configure     ../configure     ../configure     ../configure
make             make             make             make
make check       make check       make check       make check

This change also moves many of the include headers from individual
incude/sys directories under the modules directory in to a single
top level include directory.  This has the advantage of making
the build rules cleaner and logically it makes a bit more sense.
2010-09-08 12:38:56 -07:00