Commit Graph

1429 Commits

Author SHA1 Message Date
Tony Hutter b53077a9e7
Add zfs_prepare_disk script for disk firmware install
Have libzfs call a special `zfs_prepare_disk` script before a disk is
included into the pool.  The user can edit this script to add things
like a disk firmware update or a disk health check.  Use of the script
is totally optional. See the zfs_prepare_disk manpage for full details.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15243
2023-09-21 08:36:26 -07:00
Umer Saleem c63aabaf1c Improve the handling of sharesmb,sharenfs properties
For sharesmb and sharenfs properties, the status of setting the
property is tied with whether we succeed to share the dataset or
not. In case sharing the dataset is not successful, this is
treated as overall failure of setting the property. In this case,
if we check the property after the failure, it is set to on.

This commit updates this behavior and the status of setting the
share properties is not returned as failure, when we fail to
share the dataset.

For sharenfs property, if access list is provided, the syntax
errors in access list/host adresses are not validated until after
setting the property during postfix phase while trying to
share the dataset. This is not correct, since the property has
already been set when we reach there.

Syntax errors in access list/host addresses are validated while
validating the property list, before setting the property and
failure is returned to user in this case when there are errors
in access list.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #15240
2023-09-19 17:16:14 -07:00
Umer Saleem bbac1d2977 Update the behavior of mountpoint property
There are some inconsistencies in the handling of mountpoint
property. This commit updates the behavior and makes it
consistent.

If mountpoint property is set when dataset is unmounted, this
would update the mountpoint property. The mountpoint could be
valid or invalid in this case. Setting the mountpoint property
would result in success in this case. Dataset would still be
unmounted here.

On the other hand, if dataset is mounted and mountpoint
property is updated to something invalid where mount cannot be
successful, for example, setting the mountpoint inside a readonly
directory. This would unmount the dataset, set the mountpoint
property to requested value and tries to mount the dataset. The
mount operation returns error and this error is treated as
overall failure of setting the property while the property is
actually set.

To make the behavior consistent in case dataset is mounted or
unmounted, we should try to mount the dataset whenever mountpoint
property is updated. This would result in mounting the datasets
if canmount property is set to on, regardless if the dataset was
previously unmounted.

The failure in mount operation while setting the mountpoint
property should not be treated as failure, since the property is
actually set now to user requested value.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #15240
2023-09-19 17:15:24 -07:00
Rob N 7228ba1114
cmd: add 'help' subcommand to zpool and zfs
'program help subcommand' is a reasonably common pattern for
multifunction command-line programs. This commit adds support for that
style to the zpool and zfs commands.

When run as 'zpool help [<topic>]' or 'zfs help [<topic>]', executes the
'man' program on the PATH with the most likely manpage name for the
requested topic: "zpool-<topic>" or "zfs-<topic>" for subcommands, or
"zpool<topic>" or "zfs<topic>" for the "concepts" and "props" topics.
If no topic is supplied, uses the top "zpool" or "zfs" pages.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #15288
2023-09-19 09:06:47 -07:00
Paul Dagnelie 2076011e0c
Fix incorrect expected error in ztest
There is an occasional ztest failure that looks like ztest: attach 
(/var/tmp/zloop-run/ztest.13a 570425344, draid1-1-0 532152320, 1) 
returned 22, expected 95. This is because the value that we return 
is EINVAL, but expected_error is set incorrectly.

Change the expected_error value to match both the comment and the 
actual error value.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #15295
2023-09-19 09:02:23 -07:00
Tony Hutter 529bec7d7b
zed: Allow autoreplace and fault LEDs for removed vdevs
Allow zed to autoreplace vdevs marked as REMOVED.  Also update
statechange-led zedlet to toggle fault LEDs for REMOVED vdevs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15281
2023-09-18 16:25:58 -07:00
Umer Saleem 71472bf375
Relax error reporting in zpool import and zpool split
For zpool import and zpool split, zpool_enable_datasets is called
to mount and share all datasets in a pool. If there is an error
while mounting or sharing any dataset in the pool, the status of
import or split is reported as failure. However, the changes do
show up in zpool list.

This commit updates the error reporting in zpool import and zpool
split path. More descriptive messages are shown to user in case
there is an error during mount or share. Errors in mount or share
do not effect the overall status of zpool import and zpool split.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #15216
2023-09-01 17:25:11 -07:00
Serapheim Dimitropoulos cad00d5180
checkstyle: fix action failures
Reviewed-by: Don Brady <dev.fs.zfs@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #15220
2023-08-29 09:12:40 -07:00
Paul Dagnelie bee9cfb813
Increase limit of redaction list by using spill block
Currently redaction bookmarks and their associated redaction lists
have a relatively low limit of 36 redaction snapshots. This is imposed
by the number of snapshot GUIDs that fit in the bonus buffer of the
redaction list object. While this is more than enough for most use
cases, there are some limited cases where larger numbers would be
useful to support.

We tweak the redaction list creation code to use a spill block if
the number of redaction snapshots is above the amount that would fit
in the bonus buffer. We also make a small change to allow spill blocks
to be use for types of data besides SA. In order to fully leverage
this logic, we also change the redaction code to use vmem_alloc, to
handle extremely large allocations if needed. Finally, small tweaks
were made to the zfs commands and the test suite.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #15018
2023-08-26 11:34:43 -07:00
Brian Behlendorf f0e34c8879
zed: update zed.d/statechange-slot_off.sh
The statechange-slot_off.sh zedlet which was added in #15200
needed to be installed so it's included by the packages.

Additional testing has also shown that multiple retries are
often needed for the script to operate reliably.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #15210
2023-08-26 11:22:28 -07:00
Alexander Motin eda3fcd56f
ZIL: Second attempt to reduce scope of zl_issuer_lock.
The previous patch #14841 appeared to have significant flaw, causing
deadlocks if zl_get_data callback got blocked waiting for TXG sync.  I
already handled some of such cases in the original patch, but issue
 #14982 shown cases that were impossible to solve in that design.

This patch fixes the problem by postponing log blocks allocation till
the very end, just before the zios issue, leaving nothing blocking after
that point to cause deadlocks.  Before that point though any sleeps are
now allowed, not causing sync thread blockage.  This require slightly
more complicated lwb state machine to allocate blocks and issue zios
in proper order.  But with removal of special early issue workarounds
the new code is much cleaner now, and should even be more efficient.

Since this patch uses null zios between write, I've found that null
zios do not wait for logical children ready status in zio_ready(),
that makes parent write to proceed prematurely, producing incorrect
log blocks.  Added ZIO_CHILD_LOGICAL_BIT to zio_wait_for_children()
fixes it.

Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15122
2023-08-24 17:08:49 -07:00
Tony Hutter 11fbcacf37
zed: Add zedlet to power off slot when drive is faulted
If ZED_POWER_OFF_ENCLOUSRE_SLOT_ON_FAULT is enabled in zed.rc, then
power off the drive's slot in the enclosure if it becomes FAULTED.
This can help silence misbehaving drives.  This assumes your drive
enclosure fully supports slot power control via sysfs.

Reviewed-by: @AllKind
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15200
2023-08-24 11:59:03 -07:00
Rob N 114a39964f
zdb: include cloned blocks in block statistics
This gives `zdb -b` support for clone blocks.

Previously, it didn't know what clones were, so would count their space
allocation multiple times and then report leaked space (or, in debug,
would assert trying to claim blocks a second time).

This commit fixes those bugs, and reports the number of clones and the
space "used" (saved) by them.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Kay Pedersen <mail@mkwg.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: OpenDrives Inc.
Sponsored-By: Klara Inc.
Closes #15123
2023-08-01 08:56:30 -07:00
Brian Behlendorf 782312c612
zed: Reduce log noise for large JBODs
For large JBODs the log message "zfs_iter_vdev: no match" can
account for the bulk of the log messages (over 70%).  Since this
message is purely informational and not that useful we remove it.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #15086
Closes #15094
2023-07-25 13:55:29 -07:00
Tony Hutter ab0b0393cb
zed: Fix zed ASSERT on slot power cycle
We would see zed assert on one of our systems if we powered off a
slot.  Further examination showed zfs_retire_recv() was reporting
a GUID of 0, which in turn would return a NULL nvlist.  Add
in a check for a zero GUID.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15084
2023-07-21 11:46:58 -07:00
Alexander Motin fa7b2390d4
Do not report bytes skipped by scan as issued.
Scan process may skip blocks based on their birth time, DVA, etc.
Traditionally those blocks were accounted as issued, that caused
reporting of hugely over-inflated numbers, having nothing to do
with actual disk I/O.  This change utilizes never used field in
struct dsl_scan_phys to account such skipped bytes, allowing to
report how much data were actually scrubbed/resilvered and what
is the actual I/O speed.  While formally it is an on-disk format
change, it should be compatible both ways, so should not need a
feature flag.

This should partially address the same issue as c85ac731a0, but
from a different perspective, complementing it.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #15007
2023-06-30 08:47:13 -07:00
Arshad Hussain 6052060c13
Don't use hard-coded 'size' value in snprintf()
This patch changes the passing of "size" to snprintf
from hard-coded (openended) to sizeof(errbuf). This
is bringing to standard with rest of the code where-
ever 'errbuf' is used.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Closes #15003
2023-06-30 08:37:26 -07:00
Mateusz Piotrowski 62ace21a14
zdb: Add missing poolname to -C synopsis
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Sponsored-by: Klara Inc.
Closes #15014
2023-06-29 10:54:43 -07:00
Alexander Motin 70ea484e3e
Finally drop long disabled vdev cache.
It was a vdev level read cache, designed to aggregate many small
reads by speculatively issuing bigger reads instead and caching
the result.  But since it has almost no idea about what is going
on with exception of ZIO_FLAG_DONT_CACHE flag set by higher layers,
it was found to make more harm than good, for which reason it was
disabled for the past 12 years.  These days we have much better
instruments to enlarge the I/Os, such as speculative and prescient
prefetches, I/O scheduler, I/O aggregation etc.

Besides just the dead code removal this removes one extra mutex
lock/unlock per write inside vdev_cache_write(), not otherwise
disabled and trying to do some work.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14953
2023-06-09 12:40:55 -07:00
Alexander Motin 90ccfd426d
Improve l2arc reporting in arc_summary.
- Do not report L2ARC as FAULTED in presence of in-flight writes.
- Report read and write I/Os, bytes and errors.
- Remove few numbers not important to average user.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #12304 
Closes #14946
2023-06-09 10:14:05 -07:00
Alexander Motin b3ad3f48d9
Use list_remove_head() where possible.
... instead of list_head() + list_remove().  On FreeBSD the list
functions are not inlined, so in addition to more compact code
this also saves another function call.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14955
2023-06-09 10:12:52 -07:00
Rob Norris 8653f1de48 zdb: add -B option to generate backup stream
This is more-or-less like `zfs send`, but specifying the snapshot by its
objset id for situations where it can't be referenced any other way.

Sponsored-By: Klara, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #14642
2023-06-05 11:54:42 -07:00
Mike Swanson 365bae0eab
Add compatibility symlinks for FreeBSD 12.{3,4} and 13.{0,1,2}
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mike Swanson <mikeonthecomputer@gmail.com>
Closes #14902
2023-05-26 15:37:15 -07:00
Colm d3e0138a3d
Adding new read-only compatible zpool features to compatibility.d/grub2
GRUB2 is compatible with all "read-only compatible" features,
so it is safe to add new features of this type to the grub2
compatibility list. We generally want to include all compatible
features, to minimize the differences between grub2-compatible
pools and no-compatibility pools.

Adding new properties `livelist` and `zpool_checkpoint` accordingly.

Also adding them to the man page which references this file as an
example, for consistency.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Colm Buckley <colm@tuatha.org>
Closes #14893
2023-05-26 10:04:19 -07:00
Richard Yao 677c6f8457
btree: Implement faster binary search algorithm
This implements a binary search algorithm for B-Trees that reduces
branching to the absolute minimum necessary for a binary search
algorithm. It also enables the compiler to inline the comparator to
ensure that the only slowdown when doing binary search is from waiting
for memory accesses. Additionally, it instructs the compiler to unroll
the loop, which gives an additional 40% improve with Clang and 8%
improvement with GCC.

Consumers must opt into using the faster algorithm. At present, only
B-Trees used inside kernel code have been modified to use the faster
algorithm.

Micro-benchmarks suggest that this can improve binary search performance
by up to 3.5 times when compiling with Clang 16 and up to 1.9 times when
compiling with GCC 12.2.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14866
2023-05-26 10:03:12 -07:00
Brian Behlendorf 91a2325c4a
Update compatibility.d files
Add an openzfs-2.2 compatibility file for the next release.

Edon-R support has been enabled for FreeBSD removing the need
for different FreeBSD and Linux files.  Symlinks for the -linux
and -freebsd names are created for any scripts expecting that
convention.

Additionally, a symlink for ubunutu-22.04 was added.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14833
2023-05-25 13:53:08 -07:00
Alexander Motin b6fbe61fa6
zil: Add some more statistics.
In addition to a number of actual log bytes written, account also a
total written bytes including padding and total allocated bytes (bytes
<= write <= alloc).  It should allow to monitor zil traffic and space
efficiency.

Add dtrace probe for zil block size selection.

Make zilstat report more information and fit it into less width.

Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #14863
2023-05-25 13:51:53 -07:00
Brian Behlendorf 577e835f30
Probe vdevs before marking removed
Before allowing the ZED to mark a vdev as REMOVED due to a
hotplug event confirm that it is non-responsive with probe.
Any device which can be successfully probed should be left
ONLINE to prevent a healthy pool from being incorrectly
SUSPENDED.  This may occur for at least the following two
scenarios.

1) Drive expansion (zpool online -e) in VMware environments.
   If, during the partition resize operation, a partition is
   removed and re-created then udev will send a removed event.

2) Re-scanning the namespaces of an NVMe device (nvme ns-rescan)
   may result in a udev remove and add event being delivered.

Finally, update the ZED to only kick in a spare when the
removal was successful.

Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #14859
Closes #14861
2023-05-19 13:05:09 -07:00
George Amanakis 482eeef804 Teach zpool scrub to scrub only blocks in error log
Added a flag '-e' in zpool scrub to scrub only blocks in error log. A
user can pause, resume and cancel the error scrub by passing additional
command line arguments -p -s just like a regular scrub. This involves
adding a new flag, creating new libzfs interfaces, a new ioctl, and the
actual iteration and read-issuing logic. Error scrubbing is executed in
multiple txg to make sure pool performance is not affected.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Co-authored-by: TulsiJain tulsi.jain@delphix.com
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #8995
Closes #12355
2023-05-18 11:59:42 -07:00
Brian Behlendorf e34e15ed6d
Add the ability to uninitialize
zpool initialize functions well for touching every free byte...once.
But if we want to do it again, we're currently out of luck.

So let's add zpool initialize -u to clear it.

Co-authored-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12451 
Closes #14873
2023-05-18 10:02:20 -07:00
Matthew Ahrens 3095ca91c2
Verify block pointers before writing them out
If a block pointer is corrupted (but the block containing it checksums
correctly, e.g. due to a bug that overwrites random memory), we can
often detect it before the block is read, with the `zfs_blkptr_verify()`
function, which is used in `arc_read()`, `zio_free()`, etc.

However, such corruption is not typically recoverable.  To recover from
it we would need to detect the memory error before the block pointer is
written to disk.

This PR verifies BP's that are contained in indirect blocks and dnodes
before they are written to disk, in `dbuf_write_ready()`. This way,
we'll get a panic before the on-disk data is corrupted. This will help
us to diagnose what's causing the corruption, as well as being much
easier to recover from.

To minimize performance impact, only checks that can be done without
holding the spa_config_lock are performed.

Additionally, when corruption is detected, the raw words of the block
pointer are logged.  (Note that `dprintf_bp()` is a no-op by default,
but if enabled it is not safe to use with invalid block pointers.)

Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #14817
2023-05-08 11:20:23 -07:00
Brian Behlendorf dd19821149
zdb: consistent xattr output
When using zdb to output the value of an xattr only interpret it
as printable characters if the entire byte array is printable.
Additionally, if the --parseable option is set always output the
buffer contents as octal for easy parsing.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14830
2023-05-08 11:17:41 -07:00
buzzingwires a46001adb9
Allow zhack label repair to restore detached devices.
This commit expands on the zhack label repair command in d04b5c9 by
adding the -u option to undetach a device by regenerating uberblocks,
in addition to the existing functionality of fixing checksums, now
represented by -c. Previous behavior is retained in the case of no
options.

The changes are heavily inspired by Jeff Bonwick's labelfix
utility, as archived at:

https://gist.github.com/jjwhitney/baaa63144da89726e482

Additionally, it is now capable of properly determining the size of
block devices and other media, as well as handling sizes which are
not divisible by 2^18. This should make it viable for use on physical
devices and partitions, in addition to files.

These changes should make it possible to import zpools that have had
their uberblocks erased, such as in the case of pools rendered
inaccessible by erroneous detach commands.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: buzzingwires <buzzingwires@outlook.com>
Closes #14773
2023-05-03 09:03:57 -07:00
Brian Behlendorf d960beca61
zdb: Fix minor memory leak
Commit 6b6aaf6dc2 introduced a small
memory leak in zdb.  This was detected by the LeakSanitizer and was
causing all ztest runs to fail.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14796
2023-04-26 08:43:39 -07:00
Rich Ercolani 6b6aaf6dc2
Taught zdb -bb to print metadata totals
People often want estimates of how much of their pool is occupied
by metadata, but they end up using lots of text processing on zdb's
output to get it.

So let's just...provide it for them.

Now, zdb -bbbs will output something like:

Blocks  LSIZE   PSIZE   ASIZE     avg    comp   %Total  Type
[...]
    68  1.06M    272K    544K      8K    4.00     0.00      L6 Total
 1.71K   212M   6.85M   13.7M      8K   30.91     0.00      L5 Total
 1.71K   212M   6.85M   13.7M      8K   30.91     0.00      L4 Total
 1.73K   214M   6.92M   13.8M      8K   30.89     0.00      L3 Total
 18.7K  2.29G    111M    221M   11.8K   21.19     0.00      L2 Total
 3.56M   454G   28.4G   56.9G   16.0K   15.97     0.19      L1 Total
  308M  36.8T   28.2T   28.6T   95.1K    1.30    99.80      L0 Total
  311M  37.3T   28.3T   28.6T   94.2K    1.32   100.00  Total
 50.4M   774G    113G    291G   5.77K    6.85     0.99  Metadata Total

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #14746
2023-04-24 16:55:07 -07:00
Allan Jude 8eae2d214c
Add support for zpool user properties
Usage:

    zpool set org.freebsd:comment="this is my pool" poolname

Tests are based on zfs_set's user property tests.

Also stop truncating property values at MAXNAMELEN, use ZFS_MAXPROPLEN.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Beckhoff Automation GmbH & Co. KG.
Sponsored-by: Klara Inc.
Closes #11680
2023-04-21 10:20:36 -07:00
rob-wing 3e4ed4213d
Create zap for root vdev
And add it to the AVZ, this is not backwards compatible with older pools
due to an assertion in spa_sync() that verifies the number of ZAPs of
all vdevs matches the number of ZAPs in the AVZ.

Granted, the assertion only applies to #DEBUG builds - still, a feature
flag is introduced to avoid the assertion, com.klarasystems:vdev_zaps_v2

Notably, this allows to get/set properties on the root vdev:

    % zpool set user:prop=value <pool> root-0

Before this commit, it was already possible to get/set properties on
top-level vdevs with the syntax <type>-<vdev_id> (e.g. mirror-0):

    % zpool set user:prop=value <pool> mirror-0

This syntax also applies to the root vdev as it is is of type 'root'
with a vdev_id of 0, root-0. The keyword 'root' as an alias for
'root-0'.

The following tests have been added:

    - zpool get all properties from root vdev
    - zpool set a property on root vdev
    - verify root vdev ZAP is created

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology
Submitted-by: Klara, Inc.
Closes #14405
2023-04-20 10:07:56 -07:00
Low-power f9e1c63f8c
Values printed by zpool-iostat(8) should be right-aligned
This inappropriate left-alignment was introduced in 7bb7b1f.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: WHR <msl0000023508@gmail.com>
Closes #14751
2023-04-18 11:34:41 -07:00
Rob N baca06c258
libzfs: add v2 iterator interfaces
f6a0dac84 modified the zfs_iter_* functions to take a new "flags"
parameter, and introduced a variety of flags to ask the kernel to limit
the results in various ways, reducing the amount of work the caller
needed to do to filter out things they didn't need.

Unfortunately this change broke the ABI for existing clients (read:
older versions of the `zfs` program), and was reverted 399b98198.

dc95911d2 reintroduced the original patch, with the understanding that a
backwards-compatible fix would be made before the 2.2 release branch was
tagged. This commit is that fix.

This introduces zfs_iter_*_v2 functions that have the new flags
argument, and reverts the existing functions to not have the flags
parameter, as they were before. The old functions are now reimplemented
in terms of the new, with flags set to 0.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Original-patch-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Closes #14597
2023-04-10 11:53:02 -07:00
Paul Dagnelie b66c2a0899
Storage device expansion "silently" fails on degraded vdev
When a vdev is degraded or faulted, we refuse to expand it when doing
online -e. However, we also don't actually cause the online command
to fail, even though the disk didn't expand. This is confusing and
misleading, and can result in violated expectations.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes 14145
2023-04-06 10:29:27 -07:00
Tino Reichardt 6ecdd35bdb
Fix "Add colored output to zfs list"
Running `zfs list -o avail rpool` resulted in a core dump.
This commit will fix this.

Run the needed overhead only, when `use_color()` is true.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <gwilson@delphix.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #14712
2023-04-05 09:57:01 -07:00
Tino Reichardt 2bd0490faf Add colored output to zfs list
Use a bold header row and colorize the AVAIL column based on
the used space percentage of volume.

We define these colors:
- when > 80%, use yellow
- when > 90%, use red

Reviewed-by: WHR <msl0000023508@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ethan Coe-Renner <coerenner1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #14621
Closes #14350
2023-03-24 10:24:11 -07:00
Tino Reichardt 7bde396aa2 Colorize zpool iostat output
Use a bold header and colorize the space suffixes in iostat
by order of magnitude like this:
- K is green
- M is yellow
- G is red
- T is lightblue
- P is magenta
- E is cyan
- 0 space is colored gray

Reviewed-by: WHR <msl0000023508@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ethan Coe-Renner <coerenner1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #14621
Closes #14459
2023-03-24 10:23:52 -07:00
Richard Yao d1807f168e nvpair: Constify string functions
After addressing coverity complaints involving `nvpair_name()`, the
compiler started complaining about dropping const. This lead to a rabbit
hole where not only `nvpair_name()` needed to be constified, but also
`nvpair_value_string()`, `fnvpair_value_string()` and a few other static
functions, plus variable pointers throughout the code. The result became
a fairly big change, so it has been split out into its own patch.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14612
2023-03-14 15:25:50 -07:00
Pawel Jakub Dawidek 67a1b03791
Implementation of block cloning for ZFS
Block Cloning allows to manually clone a file (or a subset of its
blocks) into another (or the same) file by just creating additional
references to the data blocks without copying the data itself.
Those references are kept in the Block Reference Tables (BRTs).

The whole design of block cloning is documented in module/zfs/brt.c.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #13392
2023-03-10 11:59:53 -08:00
Richard Yao 37edc7ea98 Refactor loop in dump_histogram()
The current loop triggers a complaint that we are using an array offset
prior to a range check from cpp/offset-use-before-range-check when we
are actually calculating maximum and minimum values. I was about to file
a false positive report with CodeQL, but after looking at how the code
is structured, I really cannot blame CodeQL for mistaking this for a
range check.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:52:20 -08:00
Richard Yao 17443e0b20 Cleanup: Remove constant comparisons reported by CodeQL
CodeQL's cpp/constant-comparison query from its security-and-extended
query set reported 4 instances where we have comparions that always
evaluate the same way.

In `draid_config_by_type()`, we have an early `if (nparity == 0)` check
that returns `EINVAL`, making a later `if (nparity == 0 || nparity >
VDEV_DRAID_MAXPARITY)` partially redundant. The later check prints an
error message when parity is 0, but the early check does not. This is
not useful feedback, so we move the later check to the place where the
early check runs to replace the early check.

In `perform_thread_merge()`, we return when `num_threads == 0`. After
that block, we do `if (num_threads > 0) {`, which will always be true.
We remove the `if` statement.

In `sa_modify_attrs()`, we have a loop condition that is `k != 2`, but
at the end of the loop, we have `if (k == 0 && hdl->sa_spill)` followed
by an else that does a break. The result is that k != 2 will never be
evaluated when it is false. We drop the comparison.

In `zap_leaf_array_read()`, we have a for loop condition that is `i <
ZAP_LEAF_ARRAY_BYTES && len > 0`. However, that loop itself is in a loop
that is `while (len > 0)` and while the value of len is decremented
inside the loop, when `len == 0`, it will return, such that `len > 0`
inside the loop condition will always be true. We drop that part of the
condition.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:51:46 -08:00
Richard Yao 9368b3877c Fix TOCTOU race in zpool_do_labelclear()
Coverity reported a TOCTOU race in `zpool_do_labelclear()`. This is not
believed to be a real security issue, but fixing it reduces the number
of syscalls we do and will prevent other static analyzers from
complaining about this.

The code is expected to be equivalent. However, under rare
circumstances, such as ELOOP, ENAMETOOLONG, ENOMEM, ENOTDIR and
EOVERFLOW, we will display the error message that we currently display
for the `open()` syscall rather than the one that we currently display
for the `stat()` syscall. This is considered to be an improvement.

Reported-by: Coverity (CID-1524188)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:50:51 -08:00
Alexander Motin a8d83e2a24
More adaptive ARC eviction
Traditionally ARC adaptation was limited to MRU/MFU distribution.  But
for years people with metadata-centric workload demanded mechanisms to
also manage data/metadata distribution, that in original ZFS was just
a FIFO.  As result ZFS effectively got separate states for data and
metadata, minimum and maximum metadata limits etc, but it all required
manual tuning, was not adaptive and in its heart remained a bad FIFO.

This change removes most of existing eviction logic, rewriting it from
scratch.  This makes MRU/MFU adaptation individual for data and meta-
data, same as the distribution between data and metadata themselves.
Since most of required states separation was already done, it only
required to make arcs_size state field specific per data/metadata.

The adaptation logic is still based on previous concept of ghost hits,
just now it balances ARC capacity between 4 states: MRU data, MRU
metadata, MFU data and MFU metadata.  To simplify arc_c changes instead
of arc_p measured in bytes, this code uses 3 variable arc_meta, arc_pd
and arc_pm, representing ARC balance between metadata and data, MRU and
MFU for data, and MRU and MFU for metadata respectively as 32-bit fixed
point fractions.  Since we care about the math result only when need to
evict, this moves all the logic from arc_adapt() to arc_evict(), that
reduces per-block overhead, since per-block operations are limited to
stats collection, now moved from arc_adapt() to arc_access() and using
cheaper wmsums.  This also allows to remove ugly ARC_HDR_DO_ADAPT flag
from many places.

This change also removes number of metadata specific tunables, part of
which were actually not functioning correctly, since not all metadata
are equal and some (like L2ARC headers) are not really evictable.
Instead it introduced single opaque knob zfs_arc_meta_balance, tuning
ARC's reaction on ghost hits, allowing administrator give more or less
preference to metadata without setting strict limits.

Some of old code parts like arc_evict_meta() are just removed, because
since introduction of ABD ARC they really make no sense: only headers
referenced by small number of buffers are not evictable, and they are
really not evictable no matter what this code do.  Instead just call
arc_prune_async() if too much metadata appear not evictable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #14359
2023-03-08 11:17:23 -08:00
Rob N b988f32c70
Better handling for future crypto parameters
The intent is that this is like ENOTSUP, but specifically for when
something can't be done because we have no support for the requested
crypto parameters; eg unlocking a dataset or receiving a stream
encrypted with a suite we don't support.

Its not intended to be recoverable without upgrading ZFS itself.
If the request could be made to work by enabling a feature or modifying
some other configuration item, then some other code should be used.

load-key: In the future we might have more crypto suites (ie new values
for the `encryption` property. Right now trying to load a key on such
a future crypto suite will look up suite parameters off the end of the
crypto table, resulting in misbehaviour and/or crashes (or, with debug
enabled, trip the assertion in `zio_crypt_key_unwrap`).

Instead, lets check the value we got from the dataset, and if we can't
handle it, abort early.

recv: When receiving a raw stream encrypted with an unknown crypto
suite, `zfs recv` would report a generic `invalid backup stream`
(EINVAL). While technically correct, its not super helpful, so lets
ship a more specific error code and message.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #14577
2023-03-07 14:05:14 -08:00