Commit Graph

4356 Commits

Author SHA1 Message Date
Ameer Hamza d9bb583c25
spa_min_alloc should be GCD, not min
Since spa_min_alloc may not be a power of 2, unlike ashifts, in the
case of DRAID, we should not select the minimal value among several
vdevs. Rounding to a multiple of it is unlikely to work for other
vdevs. Instead, using the greatest common divisor produces smaller
yet more reasonable results.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #15067
2023-07-20 10:23:52 -07:00
Yuri Pankov 929173ab42
Don't panic if setting vdev properties is unsupported for this vdev type
Check that vdev has valid zap and bail out early.

While here, move objid selection out of the loop, it's not going to
change.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Yuri Pankov <yuripv@FreeBSD.org>
Closes #15063
2023-07-20 10:21:47 -07:00
Ameer Hamza 4d2dad04aa
Ignore pool ashift property during vdev attachment
Ashift can be set for a vdev only during its creation, and the
top-level vdev does not change when a vdev is attached or replaced.
The ashift property should not be used during attachment, as it
does not allow attaching/replacing a vdev if the pool's ashift
property is increased after the existing vdev was created. Instead,
we should be able to attach the vdev if the attached vdev can
satisfy the ashift requirement with its parent.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #15061
2023-07-20 09:57:16 -07:00
Alexander Motin 7d0df5422c
Do not request data L1 buffers on scan prefetch.
Set ARC_FLAG_NO_BUF when prefetching data L1 buffers for scan.  We
do not prefetch data L0 buffers, so we do not need the L1 buffers,
only want them to be ready in ARC. This saves some CPU time on the
buffers decompression.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15029
2023-07-20 09:10:04 -07:00
Yuri Pankov 8beabfd3bf
set autotrim default to 'off' everywhere
As it turns out having autotrim default to 'on' on FreeBSD never really
worked due to mess with defines where userland and kernel module were
getting different default values (userland was defaulting to 'off',
module was thinking it's 'on').

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Yuri Pankov <yuripv@FreeBSD.org>
Closes #15079
2023-07-20 09:06:55 -07:00
Alexander Motin c4e8742149
Fix raw receive with different indirect block size.
Unlike regular receive, raw receive require destination to have the
same block structure as the source.  In case of dnode reclaim this
triggers two special cases, requiring special handling:
 - If dn_nlevels == 1, we can change the ibs, but dnode_set_blksz()
should not dirty the data buffer if block size does not change, or
durign receive dbuf_dirty_lightweight() will trigger assertion.
 - If dn_nlevels > 1, we just can't change the ibs, dnode_set_blksz()
would fail and receive_object would trigger assertion, so we should
destroy and recreate the dnode from scratch.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15039
2023-07-14 16:16:40 -07:00
Alan Somers 67c5e1ba4f
Fix the ZFS checksum error histograms with larger record sizes
My analysis in PR #14716 was incorrect.  Each histogram bucket contains
the number of incorrect bits, by position in a 64-bit word, over the
entire record.  8-bit buckets can overflow for record sizes above 2k.
To forestall that, saturate each bucket at 255.  That should still get
the point across: either all bits are equally wrong, or just a couple
are.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alan Somers <asomers@gmail.com>
Sponsored-by: Axcient
Closes #15049
2023-07-14 16:13:15 -07:00
Alexander Motin fdba8cbb79
Avoid extra snprintf() in dsl_deadlist_merge().
Since we are already iterating the ZAP, we have exact string key to
remove, we do not need to call zap_remove_int() with the int key we
just converted, we can call zap_remove() for the original string.

This should make no functional change, only a micro-optimization.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15056
2023-07-14 16:11:46 -07:00
Alexander Motin 6db781d52c
Add missed DMU_PROJECTUSED_OBJECT prefetch.
It seems 9c5167d19f "Project Quota on ZFS" missed to add prefetch
for DMU_PROJECTUSED_OBJECT during scan (scrub/resilver).  It should
not cause visible problems, but may affect scub/resilver performance.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #15024
2023-07-13 09:12:55 -07:00
Alexander Motin 736d5962b4
FreeBSD: Fix build on stable/13 after 1302506.
Starting approximately from version 1302506 vn_lock_pair() grown two
additional arguments following head.  There is a one week hole, but
that is closet reference point we have.

Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #15047
2023-07-13 08:50:34 -07:00
Prakash Surya 945e39fc3a
Enable tuning of ZVOL open timeout value
The default timeout for ZVOL opens may not be sufficient for all cases,
so we should enable the value to be more easily tuned to account for
systems where the default value is insufficient.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes #15023
2023-06-30 11:34:05 -07:00
Rich Ercolani 2b10e32561
Pack our DDT ZAPs a bit denser.
The DDT is really inefficient on 4k and up vdevs, because it always
allocates 4k blocks, and while compression could save us somewhat
at ashift 9, that stops being true.

So let's change the default to 32 KiB, which seems like a reasonable
compromise between improved space savings and inflated write sizes
for DDT updates.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #14654
2023-06-30 09:42:02 -07:00
Rob N 61ab05cac7
ddt_addref: remove unnecessary phys fill when refcount is 0
The previous comment wondered if this case could happen; it turns out
that it really can't.

This block can only be entered if dde_type and dde_class are "real";
that only happens when a ddt entry has been previously synced to a ddt
store, that is, it was created on a previous txg. Since its gone through
that sync, its dde_refcount must be >0.

ddt_addref() is called from brt_pending_apply(), which is called at the
beginning of spa_sync(), before pending DMU writes/frees are issued.
Freeing a dedup block is the only thing that can decrement dde_refcount,
so there's no way for it to drop to zero before applying the clone bumps
it.

Further, even if it _could_ go to zero, it wouldn't be necessary to fill
the entry from the block. The phys content is not cleared until the free
is issued, which happens when the refcount goes to zero, when the last
real free comes through. The cloned block should be identical to what's
in the phys already, so the fill should be a no-op anyway.

I've replaced this with an assertion because this is all very dependent
on the ordering in which BRT and DDT changes are applied, and that might
change in the future.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-By: Klara, Inc.
Closes #15004
2023-06-30 09:01:58 -07:00
Alexander Motin 233425a153
Again fix race between zil_commit() and zil_suspend().
With zl_suspend read in zil_commit() not protected by any locks it
is possible for new ZIL writes to be in progress while zil_destroy()
called by zil_suspend() freeing them.  This patch closes the race
by taking zl_issuer_lock in zil_suspend() and adding the second
zl_suspend check to zil_get_commit_list(), protected by the lock.
It allows all already queued transactions to be logged normally,
while blocks any new ones, calling txg_wait_synced() for the TXGs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14979
2023-06-30 08:59:39 -07:00
Alexander Motin b4a0873092
Some ZIO micro-optimizations.
- Pack struct zio_prop by 4 bytes from 84 to 80.
 - Skip new child ZIO locking while linking to parent.  The newly
allocated ZIO is not externally visible yet, so nobody should care.
 - Skip io_bp_copy writes when not used (write && non-debug).

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14985
2023-06-30 08:54:00 -07:00
Alexander Motin fa7b2390d4
Do not report bytes skipped by scan as issued.
Scan process may skip blocks based on their birth time, DVA, etc.
Traditionally those blocks were accounted as issued, that caused
reporting of hugely over-inflated numbers, having nothing to do
with actual disk I/O.  This change utilizes never used field in
struct dsl_scan_phys to account such skipped bytes, allowing to
report how much data were actually scrubbed/resilvered and what
is the actual I/O speed.  While formally it is an on-disk format
change, it should be compatible both ways, so should not need a
feature flag.

This should partially address the same issue as c85ac731a0, but
from a different perspective, complementing it.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Akash B <akash-b@hpe.com>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #15007
2023-06-30 08:47:13 -07:00
Alexander Motin a9d6b0690b
ZIL: Fix another use-after-free.
lwb->lwb_issued_txg can not be accessed after lwb_state is set to
LWB_STATE_FLUSH_DONE and zl_lock is dropped, since the lwb may be
freed by zil_sync().  We must save the txg number before that.

This is similar to the 55b1842f92, but as I see the bug is not new.
It existed for quite a while, just was not triggered due to smaller
race window.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14988
Closes #14999
2023-06-27 17:03:37 -07:00
Alexander Motin b0cbc1aa9a
Use big transactions for small recordsize writes.
When ZFS appends files in chunks bigger than recordsize, it borrows
buffer from ARC and fills it before opening transaction.  This
supposed to help in case of page faults to not hold transaction open
indefinitely.  The problem appears when recordsize is set lower than
default 128KB. Since each block is committed in separate transaction,
per-transaction overhead becomes significant, and what is even worse,
active use of of per-dataset and per-pool locks to protect space use
accounting for each transaction badly hurts the code SMP scalability.
The same transaction size limitation applies in case of file rewrite,
but without even excuse of buffer borrowing.

To address the issue, disable the borrowing mechanism if recordsize
is smaller than default and the write request is 4x bigger than it.
In such case writes up to 32MB are executed in single transaction,
that dramatically reduces overhead and lock contention.  Since the
borrowing mechanism is not used for file rewrites, and it was never
used by zvols, which seem to work fine, I don't think this change
should create significant problems, partially because in addition to
the borrowing mechanism there are also used pre-faults.

My tests with 4/8 threads writing several files same time on datasets
with 32KB recordsize in 1MB requests show reduction of CPU usage by
the user threads by 25-35%.  I would measure it in GB/s, but at that
block size we are now limited by the lock contention of single write
issue taskqueue, which is a separate problem we are going to work on.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14964
2023-06-27 17:00:30 -07:00
Alexander Motin 8469b5aac0
Another set of vdev queue optimizations.
Switch FIFO queues (SYNC/TRIM) and active queue of vdev queue from
time-sorted AVL-trees to simple lists.  AVL-trees are too expensive
for such a simple task.  To change I/O priority without searching
through the trees, add io_queue_state field to struct zio.

To not check number of queued I/Os for each priority add vq_cqueued
bitmap to struct vdev_queue.  Update it when adding/removing I/Os.
Make vq_cactive a separate array instead of struct vdev_queue_class
member.  Together those allow to avoid lots of cache misses when
looking for work in vdev_queue_class_to_issue().

Introduce deadline of ~0.5s for LBA-sorted queues.  Before this I
saw some I/Os waiting in a queue for up to 8 seconds and possibly
more due to starvation.  With this change I no longer see it.  I
had to slightly more complicate the comparison function, but since
it uses all the same cache lines the difference is minimal.  For a
sequential I/Os the new code in vdev_queue_io_to_issue() actually
often uses more simple avl_first(), falling back to avl_find() and
avl_nearest() only when needed.

Arrange members in struct zio to access only one cache line when
searching through vdev queues.  While there, remove io_alloc_node,
reusing the io_queue_node instead.  Those two are never used same
time.

Remove zfs_vdev_aggregate_trim parameter.  It was disabled for 4
years since implemented, while still wasted time maintaining the
offset-sorted tree of TRIM requests.  Just remove the tree.

Remove locking from txg_all_lists_empty().  It is racy by design,
while 2 pair of locks/unlocks take noticeable time under the vdev
queue lock.

With these changes in my tests with volblocksize=4KB I measure vdev
queue lock spin time reduction by 50% on read and 75% on write.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14925
2023-06-27 09:09:48 -07:00
Rich Ercolani 35a6247c5f
Add a delay to tearing down threads.
It's been observed that in certain workloads (zvol-related being a
big one), ZFS will end up spending a large amount of time spinning
up taskqs only to tear them down again almost immediately, then
spin them up again...

I noticed this when I looked at what my mostly-idle system was doing
and wondered how on earth taskq creation/destroy was a bunch of time...

So I added a configurable delay to avoid it tearing down tasks the
first time it notices them idle, and the total number of threads at
steady state went up, but the amount of time being burned just
tearing down/turning up new ones almost vanished.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #14938
2023-06-26 13:57:12 -07:00
Alexander Motin 8e8acabdca
Fix memory leak in zil_parse().
482da24e2 missed arc_buf_destroy() calls on log parse errors, possibly
leaking up to 128KB of memory per dataset during ZIL replay.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14987
2023-06-17 19:51:37 -07:00
Alexander Motin ccec7fbe1c
Remove ARC/ZIO physdone callbacks.
Those callbacks were introduced many years ago as part of a bigger
patch to smoothen the write throttling within a txg. They allow to
account completion of individual physical writes within a logical
one, improving cases when some of physical writes complete much
sooner than others, gradually opening the write throttle.

Few years after that ZFS got allocation throttling, working on a
level of logical writes and limiting number of writes queued to
vdevs at any point, and so limiting latency distribution between
the physical writes and especially writes of multiple copies.
The addition of scheduling deadline I proposed in #14925 should
further reduce the latency distribution.  Grown memory sizes over
the past 10 years should also reduce importance of the smoothing.

While the use of physdone callback may still in theory provide
some smoother throttling, there are cases where we simply can not
afford it.  Since dirty data accounting is protected by pool-wide
lock, in case of 6-wide RAIDZ, for example, it requires us to take
it 8 times per logical block write, creating huge lock contention.

My tests of this patch show radical reduction of the lock spinning
time on workloads when smaller blocks are written to RAIDZ pools,
when each of the disks receives 8-16KB chunks, but the total rate
reaching 100K+ blocks per second.  Same time attempts to measure
any write time fluctuations didn't show anything noticeable.

While there, remove also io_child_count/io_parent_count counters.
They are used only for couple assertions that can be avoided.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14948
2023-06-15 10:49:03 -07:00
Alexander Motin d057807ede
Switch refcount tracking from lists to AVL-trees.
With large number of tracked references list searches under the lock
become too expensive, creating enormous lock contention.

On my tests with ZFS_DEBUG enabled this increases write throughput
with 32KB blocks from ~1.2GB/s to ~7.5GB/s.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14970
2023-06-14 08:02:27 -07:00
George Amanakis 8af1104f83
Store the L2ARC device ashift in the vdev label
If this is not done, and the pool has an ashift other than the default
(at the moment 9) then the following happens:

1) vdev_alloc() assigns the ashift of the pool to L2ARC device, but
   upon export it is not stored anywhere
2) at the first import, vdev_open() sees an vdev_ashift() of 0 and
   assigns the logical_ashift, which is 9
3) reading the contents of L2ARC, including the header fails
4) L2ARC buffers are not restored in ARC.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14313 
Closes #14963
2023-06-14 08:01:17 -07:00
George Amanakis feff9dfed3
Fix the L2ARC write size calculating logic (2)
While commit bcd5321 adjusts the write size based on the size of the log
block, this happens after comparing the unadjusted write size to the
evicted (target) size.

In this case l2ad_hand will exceed l2ad_evict and violate an assertion
at the end of l2arc_write_buffers().

Fix this by adding the max log block size to the allocated size of the
buffer to be committed before comparing the result to the target
size.

Also reset the l2arc_trim_ahead ZFS module variable when the adjusted
write size exceeds the size of the L2ARC device.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14936
Closes #14954
2023-06-09 17:05:47 -07:00
Alexander Motin 70ea484e3e
Finally drop long disabled vdev cache.
It was a vdev level read cache, designed to aggregate many small
reads by speculatively issuing bigger reads instead and caching
the result.  But since it has almost no idea about what is going
on with exception of ZIO_FLAG_DONT_CACHE flag set by higher layers,
it was found to make more harm than good, for which reason it was
disabled for the past 12 years.  These days we have much better
instruments to enlarge the I/Os, such as speculative and prescient
prefetches, I/O scheduler, I/O aggregation etc.

Besides just the dead code removal this removes one extra mutex
lock/unlock per write inside vdev_cache_write(), not otherwise
disabled and trying to do some work.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14953
2023-06-09 12:40:55 -07:00
Alexander Motin b3ad3f48d9
Use list_remove_head() where possible.
... instead of list_head() + list_remove().  On FreeBSD the list
functions are not inlined, so in addition to more compact code
this also saves another function call.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14955
2023-06-09 10:12:52 -07:00
Alexander Motin 55b1842f92
ZIL: Fix race introduced by f63811f072.
We are not allowed to access lwb after setting LWB_STATE_FLUSH_DONE
state and dropping zl_lock, since it may be freed by zil_sync().
To free itxs and waiters after dropping the lock we need to move
lwb_itxs and lwb_waiters lists elements to local storage.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14957
Closes #14959
2023-06-09 10:08:05 -07:00
Brian Behlendorf 93f8abeff0
Linux: Never sleep in kmem_cache_alloc(..., KM_NOSLEEP) (#14926)
When a kmem cache is exhausted and needs to be expanded a new
slab is allocated.  KM_SLEEP callers can block and wait for the
allocation, but KM_NOSLEEP callers were incorrectly allowed to
block as well.

Resolve this by attempting an emergency allocation as a best
effort.  This may fail but that's fine since any KM_NOSLEEP
consumer is required to handle an allocation failure.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Adam Moss <c@yotes.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
2023-06-07 10:43:43 -07:00
George Amanakis bcd5321039
Fix the L2ARC write size calculating logic
l2arc_write_size() should return the write size after adjusting for trim
and overhead of the L2ARC log blocks. Also take into account the
allocated size of log blocks when deciding when to stop writing buffers
to L2ARC.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14939
2023-06-06 12:32:37 -07:00
Rob Norris 8653f1de48 zdb: add -B option to generate backup stream
This is more-or-less like `zfs send`, but specifying the snapshot by its
objset id for situations where it can't be referenced any other way.

Sponsored-By: Klara, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #14642
2023-06-05 11:54:42 -07:00
Rob Norris 2b9f8ba673 znode: expose zfs_get_zplprop to libzpool
There's no particular reason this function should be kernel-only, and I
want to use it (indirectly) from zdb. I've moved it to zfs_znode.c
because libzpool does not compile in zfs_vfsops.c, and this at least
matches the header its imported from.

Sponsored-By: Klara, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #14642
2023-06-05 11:53:44 -07:00
Alexander Motin 5ba4025a8d
Introduce zfs_refcount_(add|remove)_few().
There are two places where we need to add/remove several references
with semantics of zfs_refcount_(add|remove). But when debug/tracing
is disabled, it is a crime to run multiple atomic_inc() in a loop,
especially under congested pool-wide allocator lock.

Introduced new functions implement the same semantics as the loop,
but without overhead in production builds.

Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14934
2023-06-05 11:51:44 -07:00
Alexander Motin 482da24e20
ZIL: Allow to replay blocks of any size.
There seems to be no reason for ZIL blocks to be limited by 128KB
other than replay code is written in such a way.  This change does
not increase the limit yet, just removes the artificial limitation.

Avoided extra memcpy() may save us a second during replay.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14910
2023-06-02 11:01:58 -07:00
Luís Henriques 928c81f4df
Fix NULL pointer dereference when doing concurrent 'send' operations
A NULL pointer will occur when doing a 'zfs send -S' on a dataset that
is still being received.  The problem is that the new 'send' will
rightfully fail to own the datasets (i.e. dsl_dataset_own_force() will
fail), but then dmu_send() will still do the dsl_dataset_disown().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Luís Henriques <henrix@camandro.org>
Closes #14903 
Closes #14890
2023-05-30 15:15:24 -07:00
Richard Yao 677c6f8457
btree: Implement faster binary search algorithm
This implements a binary search algorithm for B-Trees that reduces
branching to the absolute minimum necessary for a binary search
algorithm. It also enables the compiler to inline the comparator to
ensure that the only slowdown when doing binary search is from waiting
for memory accesses. Additionally, it instructs the compiler to unroll
the loop, which gives an additional 40% improve with Clang and 8%
improvement with GCC.

Consumers must opt into using the faster algorithm. At present, only
B-Trees used inside kernel code have been modified to use the faster
algorithm.

Micro-benchmarks suggest that this can improve binary search performance
by up to 3.5 times when compiling with Clang 16 and up to 1.9 times when
compiling with GCC 12.2.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14866
2023-05-26 10:03:12 -07:00
George Amanakis bb736d98d1
Fix inconsistent definition of zfs_scrub_error_blocks_per_txg
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14894
2023-05-26 09:53:00 -07:00
Alexander Motin b6fbe61fa6
zil: Add some more statistics.
In addition to a number of actual log bytes written, account also a
total written bytes including padding and total allocated bytes (bytes
<= write <= alloc).  It should allow to monitor zil traffic and space
efficiency.

Add dtrace probe for zil block size selection.

Make zilstat report more information and fit it into less width.

Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #14863
2023-05-25 13:51:53 -07:00
Alexander Motin f63811f072
ZIL: Reduce scope of per-dataset zl_issuer_lock.
Before this change ZIL copied all log data while holding the lock.
It caused huge lock contention on workloads with many big parallel
writes.  This change splits the process into two parts: first,
zil_lwb_assign() estimates the log space needed for all transactions,
and zil_lwb_write_close() allocates blocks and zios while holding the
lock, then, after the lock in dropped, zil_lwb_commit() copies the
data, and zil_lwb_write_issue() issues the I/Os.

Also while there slightly reduce scope of zl_lock.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #14841
2023-05-25 09:48:43 -07:00
Akash B 9d618615d1
Fix concurrent resilvers initiated at same time
For draid vdevs it was possible to initiate both the
sequential and healing resilver at same time.

This fixes the following two scenarios.
     1) There's a window where a sequential rebuild can
be started via ZED even if a healing resilver has been
scheduled.
	- This is fixed by adding additional check in
spa_vdev_attach() for any scheduled resilver and return
appropriate error code when a resilver is already in
progress.

     2) It was possible for zpool clear to start a healing
resilver when it wasn't needed at all. This occurs because
during a vdev_open() the device is presumed to be healthy not
until the device is validated by vdev_validate() and it's set
unavailable. However, by this point an async resilver will
have already been requested if the DTL isn't empty.
	- This is fixed by cancelling the SPA_ASYNC_RESILVER
request immediately at the end of vdev_reopen() when a resilver
is unneeded.

Finally, added a testcase in ZTS for verification.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes #14881
Closes #14892
2023-05-24 12:28:09 -07:00
youzhongyang f8447cf22e
Linux 6.4 compat: reclaimed_slab renamed to reclaimed
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes #14891
2023-05-24 12:23:42 -07:00
Brian Atkinson ad0a554614
Hold db_mtx when updating db_state
Commit 555ef90 did some general code refactoring for
dmu_buf_will_not_fill() and dmu_buf_will_fill(). However, the db_mtx was
not held when update db->db_state in those code block. The rest of the
dbuf code always holds the db_mtx when updating db_state. This is
important because cv_wait() db_changed is used to check for db_state
changes.

Updating dmu_buf_will_not_fill() and dmu_buf_will_fill() to hold the
db_mtx when updating db_state.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #14875
2023-05-19 13:05:53 -07:00
Brian Behlendorf 577e835f30
Probe vdevs before marking removed
Before allowing the ZED to mark a vdev as REMOVED due to a
hotplug event confirm that it is non-responsive with probe.
Any device which can be successfully probed should be left
ONLINE to prevent a healthy pool from being incorrectly
SUSPENDED.  This may occur for at least the following two
scenarios.

1) Drive expansion (zpool online -e) in VMware environments.
   If, during the partition resize operation, a partition is
   removed and re-created then udev will send a removed event.

2) Re-scanning the namespaces of an NVMe device (nvme ns-rescan)
   may result in a udev remove and add event being delivered.

Finally, update the ZED to only kick in a spare when the
removal was successful.

Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #14859
Closes #14861
2023-05-19 13:05:09 -07:00
George Amanakis 482eeef804 Teach zpool scrub to scrub only blocks in error log
Added a flag '-e' in zpool scrub to scrub only blocks in error log. A
user can pause, resume and cancel the error scrub by passing additional
command line arguments -p -s just like a regular scrub. This involves
adding a new flag, creating new libzfs interfaces, a new ioctl, and the
actual iteration and read-issuing logic. Error scrubbing is executed in
multiple txg to make sure pool performance is not affected.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Co-authored-by: TulsiJain tulsi.jain@delphix.com
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #8995
Closes #12355
2023-05-18 11:59:42 -07:00
Brian Behlendorf e34e15ed6d
Add the ability to uninitialize
zpool initialize functions well for touching every free byte...once.
But if we want to do it again, we're currently out of luck.

So let's add zpool initialize -u to clear it.

Co-authored-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12451 
Closes #14873
2023-05-18 10:02:20 -07:00
Richard Yao ee7b71dbc9 Fix undefined behavior in spa_sync_props()
8eae2d214c caused Coverity to begin
complaining about "Improper use of negative value" in two places in
spa_sync_props() because Coverity correctly inferred from `prop ==
ZPOOL_PROP_INVAL` that prop could be -1 while both zpool_prop_to_name()
and zpool_prop_get_type() use it an array index, which is undefined
behavior.

Assuming that the system does not panic from an attempt to read invalid
memory, the case statement for ZPOOL_PROP_INVAL will ensure that only
user properties will reach this code when prop is ZPOOL_PROP_INVAL, such
that execution will continue safely. However, if we are unlucky enough
to read invalid memory, then the system will panic.

This issue predates the patch that caused coverity to begin complaining.
Thankfully, our userland tools do not pass nonsense to us, so this bug
should not be triggered unless a future userland tool attempts to set a
property that we do not understand.

Reported-by: Coverity (CID-1561129)
Reported-by: Coverity (CID-1561130)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14860
2023-05-15 10:29:05 -07:00
Richard Yao c87798d8ff Fix use after free regression in spa_remove_healed_errors()
6839ec6f10 placed code in
spa_remove_healed_errors() that uses a pointer after the kmem_free()
call that frees it.

Reported-by: Coverity (CID-1562375)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14860
2023-05-15 10:29:01 -07:00
Alexander Motin 7381ddf1ab
zil: Free lwb_buf after write completion.
There is no sense to keep that memory allocated during the flush.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #14855
2023-05-12 09:49:26 -07:00
Alexander Motin 895e03135e
zil: Some micro-optimizations.
Should not cause functional changes.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #14854
2023-05-12 09:14:29 -07:00
Pawel Jakub Dawidek e610766838 Make sure we are not trying to clone a spill block.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14825
2023-05-11 16:07:15 -07:00
Pawel Jakub Dawidek fbbe5e96ef Correct comment.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14825
2023-05-11 16:07:11 -07:00
Pawel Jakub Dawidek 9879930f7a Remove badly placed comment.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14825
2023-05-11 16:07:07 -07:00
Pawel Jakub Dawidek b6d7370b9d Don't call zfs_exit_two() before zfs_enter_two().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14825
2023-05-11 16:07:02 -07:00
Pawel Jakub Dawidek d0d91f185e Don't use dmu_buf_is_dirty() for unassigned transaction.
The dmu_buf_is_dirty() call doesn't make sense here for two reasons:
1. txg is 0 for unassigned tx, so it was a no-op.
2. It is equivalent of checking if we have dirty records and we are doing
   this few lines earlier.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14825
2023-05-11 16:06:57 -07:00
Pawel Jakub Dawidek bd8c6bd66f Deny block cloning is dbuf size doesn't match BP size.
I don't know an easy way to shrink down dbuf size, so just deny block cloning
into dbufs that don't match our BP's size.

This fixes the following situation:
1. Create a small file, eg. 1kB of random bytes. Its dbuf will be 1kB.
2. Create a larger file, eg. 2kB of random bytes. Its dbuf will be 2kB.
3. Truncate the large file to 0. Its dbuf will remain 2kB.
4. Clone the small file into the large file. Small file's BP lsize is
   1kB, but the large file's dbuf is 2kB.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14825
2023-05-11 16:06:52 -07:00
Pawel Jakub Dawidek 555ef90c5c Additional block cloning fixes.
Reimplement some of the block cloning vs dbuf logic, mostly to fix
situation where we clone a block and in the same transaction group
we want to partially overwrite the clone.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14825
2023-05-11 16:06:36 -07:00
Alexander Motin 469019fb0b
zil: Don't expect zio_shrink() to succeed.
At least for RAIDZ zio_shrink() does not reduce zio size, but reduced
wsz in that case likely results in writing uninitialized memory.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #14853
2023-05-11 14:27:12 -07:00
Ameer Hamza 14ba8ab97d
Prevent panic during concurrent snapshot rollback and zvol read
Protect zvol_cdev_read with zv_suspend_lock to prevent concurrent
release of the dnode, avoiding panic when a snapshot is rolled back
in parallel during ongoing zvol read operation.

Reviewed-by: Chunwei Chen <tuxoko@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #14839
2023-05-09 17:56:35 -07:00
Brian Behlendorf 903c3613d4
Add dmu_tx_hold_append() interface
Provides an interface which callers can use to declare a write when
the exact starting offset in not yet known.  Since the full range
being updated is not available only the first L0 block at the
provided offset will be prefetched.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14819
2023-05-09 09:03:10 -07:00
George Amanakis d38c815fe2
Remove duplicate code in l2arc_evict()
l2arc_evict() performs the adjustment of the size of buffers to be
written on L2ARC unnecessarily. l2arc_write_size() is called right
before l2arc_evict() and performs those adjustments.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14828
2023-05-09 08:54:41 -07:00
Alexander Motin b035f2b2cb
Remove single parent assertion from zio_nowait().
We only need to know if ZIO has any parent there.  We do not care if
it has more than one, but use of zio_unique_parent() == NULL asserts
that.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14823
2023-05-09 08:54:01 -07:00
George Amanakis 6839ec6f10
Enable the head_errlog feature to remove errors
In case check_filesystem() does not error out and does not report
an error, remove that error block from error lists and logs
without requiring a scrub. This can happen when the original file and
all snapshots/clones referencing it have been removed.

Otherwise zpool status will still report that "Permanent errors have
been detected..." without actually reporting any of them.

To implement this change the functions introduced in corrective
receive were modified to take into account the head_errlog feature.

Before this change:
=============================
pool: test
 state: ONLINE
status: One or more devices has experienced an error resulting in data
        corruption.  Applications may be affected.
action: Restore the file in question if possible.  Otherwise restore the
        entire pool from backup.
   see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
config:

        NAME                   STATE     READ WRITE CKSUM
        test                   ONLINE       0     0     0
          /home/user/vdev_a    ONLINE       0     0     2

errors: Permanent errors have been detected in the following files:

=============================

After this change:
=============================
  pool: test
 state: ONLINE
status: One or more devices has experienced an unrecoverable error.  An
        attempt was made to correct the error.  Applications are
unaffected.
action: Determine if the device needs to be replaced, and clear the
errors
        using 'zpool clear' or replace the device with 'zpool replace'.
   see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P
config:

        NAME                   STATE     READ WRITE CKSUM
        test                   ONLINE       0     0     0
          /home/user/vdev_a    ONLINE       0     0     2

errors: No known data errors
=============================

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14813
2023-05-09 08:53:27 -07:00
George Amanakis 4eca03faaf
Fixes in head_errlog feature with encryption
For the head_errlog feature use dsl_dataset_hold_obj_flags() instead of
dsl_dataset_hold_obj() in order to enable access to the encryption keys
(if loaded). This enables reporting of errors in encrypted filesystems
which are not mounted but have their keys loaded.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14837
2023-05-08 13:35:03 -07:00
Matthew Ahrens 3095ca91c2
Verify block pointers before writing them out
If a block pointer is corrupted (but the block containing it checksums
correctly, e.g. due to a bug that overwrites random memory), we can
often detect it before the block is read, with the `zfs_blkptr_verify()`
function, which is used in `arc_read()`, `zio_free()`, etc.

However, such corruption is not typically recoverable.  To recover from
it we would need to detect the memory error before the block pointer is
written to disk.

This PR verifies BP's that are contained in indirect blocks and dnodes
before they are written to disk, in `dbuf_write_ready()`. This way,
we'll get a panic before the on-disk data is corrupted. This will help
us to diagnose what's causing the corruption, as well as being much
easier to recover from.

To minimize performance impact, only checks that can be done without
holding the spa_config_lock are performed.

Additionally, when corruption is detected, the raw words of the block
pointer are logged.  (Note that `dprintf_bp()` is a no-op by default,
but if enabled it is not safe to use with invalid block pointers.)

Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #14817
2023-05-08 11:20:23 -07:00
Alexander Motin 190290a9ac
Fix two abd_gang_add_gang() issues.
- There is no reason to assert that added gang is not empty.  It
may be weird to add an empty gang, but it is legal.
 - When moving chain list from the added gang clear its size, or it
will trigger assertion in abd_verify() when that gang is freed.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14816
2023-05-05 09:17:55 -07:00
Pawel Jakub Dawidek 599df82049
Plug memory leak in zfsdev_state.
On kernel module unload, free all zfsdev state structures, except for
zfsdev_state_listhead, which is statically allocated.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14824
2023-05-05 08:51:41 -07:00
Ameer Hamza 82ac409acc
zpool import -m also removing spare and cache when log device is missing
spa_import() relies on a pool config fetched by spa_try_import() for
spare/cache devices. Import flags are not passed to spa_tryimport(),
which makes it return early due to a missing log device and missing
retrieving the cache device and spare eventually. Passing
ZFS_IMPORT_MISSING_LOG to spa_tryimport() makes it fetch the correct
configuration regardless of the missing log device.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #14794
2023-05-03 15:10:32 -07:00
George Amanakis 9de5300c7f
Optimize check_filesystem() and process_error_log()
Integrate check_clones() into check_filesystem() and implement a list
instead of iterating recursively over the clones, thus eliminating the
risk of a stack overflow.

Also use kmem_zalloc() to allocate large structures in
process_error_log() reducing its stack size from ~700 to ~128 bytes.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14744
2023-05-03 09:00:14 -07:00
Pawel Jakub Dawidek d96e29576c
Use correct block pointer in block cloning case.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14806
2023-05-02 09:24:26 -07:00
Mateusz Guzik e2a92d726e
blake3: fix up bogus checksums in face of cpu migration
This is a temporary measure until a better fix is sorted out.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by:	Rubicon Communications, LLC ("Netgate")
Closes #14785
Closes #14808
2023-05-01 17:21:27 -07:00
Serapheim Dimitropoulos 0c93d86f01
Correct ABD size for split block ZIOs
Currently when layering the ABD buffer of each split block on top of
an indirect vdev's ZIO ABD we don't specify the split block's ABD.
This results in those ABDs being incorrectly sized by inheriting
the size of their parent ABD which is larger than what each split
block needs.

The above behavior isn't causing any bugs currently but can lead
to unexpected ABD sizes for people analyzing and/or working on
the ZIO codepath. This patch fixes this behavior by properly setting
the ABD size for split block ZIOs.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #14804
2023-05-01 17:18:42 -07:00
Justin Hibbits 5a83f761c7
powerpc64: Support ELFv2 asm on Big Endian
FreeBSD/powerpc64 is all ELFv2 since FreeBSD 13, even big endian.  The
existing sha256 and sha512 asm code assumes that BE is all ELFv1, and LE
is ELFv2.  Minor changes to add ELFv2 in the BE side gets this working
correctly on FreeBSD with latest OpenZFS import.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Justin Hibbits <chmeeedalf@gmail.com>
Closes #14779
2023-04-27 12:49:21 -07:00
Alexander Motin 2fd1c30423
Mark TX_COMMIT transaction with TXG_NOTHROTTLE.
TX_COMMIT has no on-disk representation and does not produce any more
dirty data.  It should not wait for anything, and even just skipping
the checks if not waiting gives improvement noticeable in profiler.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14798
2023-04-27 12:32:58 -07:00
Tino Reichardt ee728008a4
Fix BLAKE3 aarch64 assembly for FreeBSD and macOS
The x18 register isn't useable within FreeBSD kernel space, so we
have to fix the BLAKE3 aarch64 assembly for not using it.

The source files are here: https://github.com/mcmilk/BLAKE3-tests

Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #14728
2023-04-26 12:40:26 -07:00
Brian Behlendorf b5411618f7
Fix checkstyle warning
Resolve a missed checkstyle warning.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14799
2023-04-26 11:49:16 -07:00
Alexander Motin bba7cbf0a4
Fix positive ABD size assertion in abd_verify().
Gang ABDs without childred are legal, and they do have zero size.
For other ABD types zero size doesn't have much sense and likely
not working correctly now.

Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14795
2023-04-26 09:20:43 -07:00
Mateusz Guzik e37a89d5d0 FreeBSD: fix up EINVAL from getdirentries on .zfs
Without the change:
/.zfs
/.zfs/snapshot
find: /.zfs: Invalid argument

Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes #14774
2023-04-26 09:16:37 -07:00
Mateusz Guzik 88b8777159 FreeBSD: add missing vn state transition for .zfs
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes #14774
2023-04-26 09:16:09 -07:00
Brian Behlendorf 0e8a42bbee
Revert "Fix data race between zil_commit() and zil_suspend()"
This reverts commit 4c856fb333 to
resolve a newly introduced deadlock which in practice in more
disruptive that the issue this commit intended to address.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #14775
Closes #14790
2023-04-25 16:40:55 -07:00
Han Gao 6d59d5df98
Add loongarch64 support
Add loongarch64 definitions & lua module setjmp asm

LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Han Gao <gaohan@uniontech.com>
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Closes #13422
2023-04-25 16:05:45 -07:00
Mateusz Guzik 81a2b2e6a6
FreeBSD: add missing vop_fplookup assignments
It became illegal to not have them as of
5f6df177758b9dff88e4b6069aeb2359e8b0c493 ("vfs: validate that vop
vectors provide all or none fplookup vops") upstream.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes #14788
2023-04-24 16:15:42 -07:00
Mateusz Guzik ff0e135e25 FreeBSD: try to fallback early if can't do optimized copy
Not complete, but already shaves on some locking.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by:	Rubicon Communications, LLC ("Netgate")
Closes #14723
2023-04-24 16:13:52 -07:00
Mateusz Guzik a7982d5d30 FreeBSD: fix up EXDEV handling for clone_range
API contract requires VOPs to handle EXDEV internally, worst case by
falling back to the generic copy routine. This broke with the recent
changes.

While here whack custom loop to lock 2 vnodes with vn_lock_pair, which
provides the same functionality internally. write start/finish around
it plays no role so got eliminated.

One difference is that vn_lock_pair always takes an exclusive lock on
both vnodes. I did not patch around it because current code takes an
exclusive lock on the target vnode. zfs supports shared-locking for
writes, so this serializes different calls to the routine as is, despite
range locking inside. At the same time you may notice the source vnode
can get some traffic if only shared-locked, thus once more this goes
the safer route of exclusive-locking. Note this should be patched to
use shared-locking for both once the feature is considered stable.

Technically the switch to vn_lock_pair should be a separate change, but
it would only introduce churn immediately whacked by the rest of the
patch.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Sponsored by:	Rubicon Communications, LLC ("Netgate")
Closes #14723
2023-04-24 16:13:09 -07:00
Dimitry Andric 62cc9d4f6b
FreeBSD: make zfs_vfs_held() definition consistent with declaration
Noticed while attempting to change FreeBSD's boolean_t into an actual
bool: in include/sys/zfs_ioctl_impl.h, zfs_vfs_held() is declared to
return a boolean_t, but in module/os/freebsd/zfs/zfs_ioctl_os.c it is
defined to return an int. Make the definition match the declaration.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes #14776
2023-04-21 10:22:52 -07:00
Allan Jude 8eae2d214c
Add support for zpool user properties
Usage:

    zpool set org.freebsd:comment="this is my pool" poolname

Tests are based on zfs_set's user property tests.

Also stop truncating property values at MAXNAMELEN, use ZFS_MAXPROPLEN.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Beckhoff Automation GmbH & Co. KG.
Sponsored-by: Klara Inc.
Closes #11680
2023-04-21 10:20:36 -07:00
Richard Yao ab71b24d20 Linux: zfs_zaccess_trivial() should always call generic_permission()
Building with Clang on Linux generates a warning that err could be
uninitialized if mnt_ns is a NULL pointer. However, mnt_ns should never
be NULL, so there is no need to put this behind an if statement.  Taking
it outside of the if statement means that the possibility of err being
uninitialized goes from being always zero in a way that the compiler
could not realize to a way that is always zero in a way that the
compiler can realize.

Sponsored-By: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Youzhong Yang <yyang@mathworks.com>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Closes #14738
2023-04-20 10:29:44 -07:00
rob-wing 3e4ed4213d
Create zap for root vdev
And add it to the AVZ, this is not backwards compatible with older pools
due to an assertion in spa_sync() that verifies the number of ZAPs of
all vdevs matches the number of ZAPs in the AVZ.

Granted, the assertion only applies to #DEBUG builds - still, a feature
flag is introduced to avoid the assertion, com.klarasystems:vdev_zaps_v2

Notably, this allows to get/set properties on the root vdev:

    % zpool set user:prop=value <pool> root-0

Before this commit, it was already possible to get/set properties on
top-level vdevs with the syntax <type>-<vdev_id> (e.g. mirror-0):

    % zpool set user:prop=value <pool> mirror-0

This syntax also applies to the root vdev as it is is of type 'root'
with a vdev_id of 0, root-0. The keyword 'root' as an alias for
'root-0'.

The following tests have been added:

    - zpool get all properties from root vdev
    - zpool set a property on root vdev
    - verify root vdev ZAP is created

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Sponsored-by: Seagate Technology
Submitted-by: Klara, Inc.
Closes #14405
2023-04-20 10:07:56 -07:00
Herb Wartens 71d191ef25
Allow MMP to bypass waiting for other threads
At our site we have seen cases when multi-modifier protection is enabled
(multihost=on) on our pool and the pool gets suspended due to a single
disk that is failing and responding very slowly. Our pools have 90 disks
in them and we expect disks to fail. The current version of MMP requires
that we wait for other writers before moving on. When a disk is
responding very slowly, we observed that waiting here was bad enough to
cause the pool to suspend. This change allows the MMP thread to bypass
waiting for other threads and reduces the chances the pool gets
suspended.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Herb Wartens <hawartens@gmail.com>
Closes #14659
2023-04-19 13:22:59 -07:00
Ameer Hamza 719534ca8e
Fix "Detach spare vdev in case if resilvering does not happen"
Spare vdev should detach from the pool when a disk is reinserted.
However, spare detachment depends on the completion of resilvering,
and if resilver does not schedule, the spare vdev keeps attached to
the pool until the next resilvering. When a zfs pool contains
several disks (25+ mirror), resilvering does not always happen when
a disk is reinserted. In this patch, spare vdev is manually detached
from the pool when resilvering does not occur and it has been tested
on both Linux and FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #14722
2023-04-19 09:04:32 -07:00
Tony Hutter accfdeb948
Revert "ZFS_IOC_COUNT_FILLED does unnecessary txg_wait_synced()"
This reverts commit 4b3133e671.

Users identified this commit as a possible source of data
corruption:
https://github.com/openzfs/zfs/issues/14753

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Issue #14753 
Closes #14761
2023-04-18 08:41:52 -07:00
Pawel Jakub Dawidek 3b5af20139
Fix VERIFY(!zil_replaying(zilog, tx)) panic
The zfs_log_clone_range() function is never called from the
zfs_clone_range_replay() function, so I assumed it is safe to assert
that zil_replaying() is never TRUE here. It turns out zil_replaying()
also returns TRUE when the sync property is set to disabled.

Fix the problem by just returning if zil_replaying() returns TRUE.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported by: Florian Smeets
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14758
2023-04-17 16:42:09 -07:00
Pawel Jakub Dawidek c71fe71640
Fix data corruption when cloning embedded blocks
Don't overwrite blk_phys_birth, as for embedded blocks it is part of
the payload.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Issue #13392 
Closes #14739
2023-04-12 16:15:05 -07:00
George Amanakis 574e09d8c6
Fix in check_filesystem()
Fix the code in case of missing snapshots. Previously the check was in
a conditional that would be executed if the filesystem had snapshots.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14735
2023-04-12 08:53:53 -07:00
Alan Somers 678a3b8f99
Trim needless zeroes from checksum events
The ereport.fs.zfs.checksum event contains histograms of the bits that
were wrongly set or cleared according to their bit position in a 64-bit
word.  So the maximum value that any histogram bucket could have would
be 64.  But ZFS currently uses a uint32_t to hold each bucket.  As a
result, the event report is full of needless zeroes.

Change the bucket size to uint8_t, stripping 768 needless zeros from
each event.

Original event format:
```
 class=ereport.fs.zfs.checksum ena=639460469834258433 pool=testpool.1933 pool_guid=4979719877084416563 pool_state=0 pool_context=0 pool_failmode=wait vdev_guid=4136721804819128578 vdev_type=file vdev_path=/tmp/kyua.1TxP3A/2/work/file1.1933 vdev_ashift=9 vdev_complete_ts=609837019678 vdev_delta_ts=33450 vdev_read_errors=0 vdev_write_errors=0 vdev_cksum_errors=20 vdev_delays=0 parent_guid=2751977006639883417 parent_type=raidz vdev_spare_guids= zio_err=0 zio_flags=1048752 zio_stage=4194304 zio_pipeline=65011712 zio_delay=0 zio_timestamp=0 zio_delta=0 zio_priority=4 zio_offset=702976 zio_size=1024 zio_objset=24 zio_object=0 zio_level=3 zio_blkid=0 bad_ranges=0000000000000400 bad_ranges_min_gap=8 bad_range_sets=0000079e bad_range_clears=00000854 bad_set_histogram=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 bad_cleared_histogram=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 time=00000016806457270000000323406839 eid=458
```

New format:
```
 class=ereport.fs.zfs.checksum ena=96599319807790081 pool=testpool.1933 pool_guid=1236902063710799041 pool_state=0 pool_context=0 pool_failmode=wait vdev_guid=2774253874431514999 vdev_type=file vdev_path=/tmp/kyua.6Temlq/2/work/file1.1933 vdev_ashift=9 vdev_complete_ts=92124283803 vdev_delta_ts=46670 vdev_read_errors=0 vdev_write_errors=0 vdev_cksum_errors=20 vdev_delays=0 parent_guid=8090931855087882905 parent_type=raidz vdev_spare_guids= zio_err=0 zio_flags=1048752 zio_stage=4194304 zio_pipeline=65011712 zio_delay=0 zio_timestamp=0 zio_delta=0 zio_priority=4 zio_offset=1028608 zio_size=512 zio_objset=0 zio_object=0 zio_level=0 zio_blkid=4 bad_ranges=0000000000000200 bad_ranges_min_gap=8 bad_range_sets=0000061f bad_range_clears=000001f4 bad_set_histogram=1719161c1c1c101618171a151a1a19161e1c171d1816161c191f1a18192117191c131d171b1613151a171419161a1b1319101b14171b18151e191a1b141a1c17 bad_cleared_histogram=06090a0808070a0b020609060506090a01090a050a0a0509070609080d050d0607080d060507080c04070807070a0608020c080c080908040808090a05090a07 time=00000016806477050000000604157480 eid=62
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Alan Somers <asomers@FreeBSD.org>
Sponsored-by: Axcient
Closes #14716
2023-04-10 14:24:27 -07:00
youzhongyang d4dc53dad2
Linux 6.3 compat: idmapped mount API changes
Linux kernel 6.3 changed a bunch of APIs to use the dedicated idmap 
type for mounts (struct mnt_idmap), we need to detect these changes 
and make zfs work with the new APIs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes #14682
2023-04-10 14:15:36 -07:00
Kyle Evans dee77f45d0 module: resync part of Makefile.bsd
sha256-armv8.S and sha512-armv8.S need the same treatment as the sse
bits; removal of -mgeneral-regs-only from flags.

This fixes errors about requiring NEON, which is a difference in clang
vs. gcc treatment of -mgeneral-regs-only being specified on asm files.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Closes #14715
2023-04-10 12:39:43 -07:00
Rob N ff73574cd8
vdev: expose zfs_vdev_max_ms_shift as a module parameter
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Seagate Technology LLC
Closes #14719
2023-04-06 10:52:50 -07:00
George Amanakis a8a127e2c9
Fix typo in check_clones()
Run kmem_free() after zap_cursor_fini().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Adam Moss <c@yotes.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14702
2023-04-06 10:46:18 -07:00
Martin Matuška a3f82aec93
Miscellaneous FreBSD compilation bugfixes
Add missing machine/md_var.h to spl/sys/simd_aarch64.h and
spl/sys/simd_arm.h

In spl/sys/simd_x86.h, PCB_FPUNOSAVE exists only on amd64, use PCB_NPXNOSAVE
on i386

In FreeBSD sys/elf_common.h redefines AT_UID and AT_GID on FreeBSD, we need
a hack in vnode.h similar to Linux. sys/simd.h needs to be included early.

In zfs_freebsd_copy_file_range() we pass a (size_t *)lenp to
zfs_clone_range() that expects a (uint64_t *)

Allow compiling armv6 world by limiting ARM macros in sha256_impl.c and
sha512_impl.c to __ARM_ARCH > 6

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Reviewed-by: Signed-off-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes #14674
2023-04-06 10:35:02 -07:00
Rob N ece7ab7e7d
vdev: expose zfs_vdev_def_queue_depth as a module parameter
It was previously available only to FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Seagate Technology LLC
Closes #14718
2023-04-06 10:31:19 -07:00
Alexander Motin 1038f87c4e
Fix some signedness issues in arc_evict()
It may happen that "wanted total ARC size" (wt) is negative, that was
expected.  But multiplication product of it and unsigned fractions
result in unsigned value, incorrectly shifted right with a sing loss.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:   iXsystems, Inc.
Closes #14692
2023-04-05 10:42:22 -07:00
youzhongyang 8eb2f26057
Linux 6.3 compat: writepage_t first arg struct folio*
The type def of writepage_t in kernel 6.3 is changed to take
struct folio* as the first argument. We need to detect this
change and pass correct function to write_cache_pages().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes #14699
2023-04-05 10:01:38 -07:00
Brian Behlendorf 1142362ff6
Use vmem_zalloc to silence allocation warning
The kmem allocation in zfs_prune_aliases() will trigger a large
allocation warning on systems with 64K pages.  Resolve this by
switching to vmem_alloc() which internally uses kvmalloc() so the
right allocator will be used based on the allocation size.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8491
Closes #14694
2023-03-31 09:43:54 -07:00
George Amanakis 431083f75b
Fixes in persistent error log
Address the following bugs in persistent error log:

1) Check nested clones, eg "fs->snap->clone->snap2->clone2".

2) When deleting files containing error blocks in those clones (from
   "clone" the example above), do not break the check chain.

3) When deleting files in the originating fs before syncing the errlog
   to disk, do not break the check chain. This happens because at the
   time of introducing the error block in the error list, we do not have
   its birth txg and the head filesystem. If the original file is
   deleted before the error list is synced to the error log (which is
   when we actually lookup the birth txg and the head filesystem), then
   we do not have access to this info anymore and break the check chain.

The most prominent change is related to achieving (3). We expand the
spa_error_entry_t structure to accommodate the newly introduced
zbookmark_err_phys_t structure (containing the birth txg of the error
block).Due to compatibility reasons we cannot remove the
zbookmark_phys_t structure and we also need to place the new structure
after se_avl, so it is not accounted for in avl_find(). Then we modify
spa_log_error() to also provide the birth txg of the error block. With
these changes in place we simplify the previously introduced function
get_head_and_birth_txg() (now named get_head_ds()).

We chose not to follow the same approach for the head filesystem (thus
completely removing get_head_ds()) to avoid introducing new lock
contentions.

The stack sizes of nested functions (as measured by checkstack.pl in the
linux kernel) are:
check_filesystem [zfs]: 272 (was 912)
check_clones [zfs]: 64

We also introduced two new tests covering the above changes.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14633
2023-03-28 16:51:58 -07:00
Kevin Jin 65d10bd87c
Fix short-lived txg caused by autotrim
Current autotrim causes short-lived txg through:

1. calling txg_wait_synced() in metaslab_enable()
2. calling txg_wait_open() with should_quiesce = true

This patch addresses all the issues mentioned above.

A new cv, vdev_autotrim_kick_cv is added to kick autotrim activity.
It will be signaled once a txg is synced so that it does not change 
the original autotrim pace. Also because it is a cv, the wait is 
interruptible which speeds up the vdev_autotrim_stop_wait() call.

Finally, combining big zfs_txg_timeout, txg_wait_open() also causes
delay when exporting a pool.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: jxdking <lostking2008@hotmail.com>
Issue #8993
Closes #12194
2023-03-28 08:43:41 -07:00
Brian Behlendorf 64bfa6bae3
Additional limits on hole reporting
Holding the zp->z_rangelock as a RL_READER over the range
0-UINT64_MAX is sufficient to prevent the dnode from being
re-dirtied by concurrent writers.  To avoid potentially
looping multiple times for external caller which do not
take the rangelock holes are not reported after the first
sync.  While not optimal this is always functionally correct.

This change adds the missing rangelock calls on FreeBSD to
zvol_cdev_ioctl().

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14512
Closes #14641
2023-03-28 08:19:03 -07:00
George Wilson a604d3243b
Revert "Do not hold spa_config in ZIL while blocked on IO"
This reverts commit 7d638df09b.

Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes #14678
2023-03-28 08:13:32 -07:00
Ameer Hamza a05263b7aa
Update vdev state for spare vdev
zfsd fetches new pool configuration through ZFS_IOC_POOL_STATS but
it does not get updated nvlist configuration for spare vdev since
the configuration is read by spa_spares->sav_config. In this commit,
updating the vdev state for spare vdev that is consumed by zfsd on
spare disk hotplug.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #14653
2023-03-24 10:30:38 -07:00
Rich Ercolani 0ad5f43442
Drop lying to the compiler in the fletcher4 code
This is probably the uncontroversial part of #13631, which fixes
a real problem people are having.

There's still things to improve in our code after this is merged,
but it should stop the breakage that people have reported, where
we lie about a type always being aligned and then pass in stack
objects with no alignment requirement and hope for the best.

Of course, our SIMD code was written with unaligned accesses, so it
doesn't care if we drop this...but some auto-vectorized code that
gcc emits sure does, since we told it it can assume they're aligned.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #14649
2023-03-24 10:29:19 -07:00
George Wilson 460d887c43
panic loop when removing slog device
There is a window in the slog removal code where a panic loop could
ensue if the system crashes during that operation. The original design
of slog removal did not persisted any state because the removal happened
synchronously. This was changed by a later commit which persisted the
vdev_removing flag and exposed this bug. If a slog removal is in
progress and happens to crash after persisting the vdev_removing flag to
the label but before the vdev is removed from the spa config, then the
pool will continue to panic on import. Here's a sample of the panic:

[  134.387411] VERIFY0(0 == dmu_buf_hold_array(os, object, offset, size,
FALSE, FTAG, &numbufs, &dbp)) failed (0 == 22)
[  134.393865] PANIC at dmu.c:1135:dmu_write()
[  134.396035] Kernel panic - not syncing: VERIFY0(0 ==
dmu_buf_hold_array(os, object, offset, size, FALSE, FTAG, &numbufs,
&dbp)) failed (0 == 22)
[  134.397857] CPU: 2 PID: 5914 Comm: txg_sync Kdump: loaded Tainted:
P           OE     5.4.0-1100-dx2023020205-b3751f8c2-azure #106
[  134.407938] Hardware name: Microsoft Corporation Virtual
Machine/Virtual Machine, BIOS 090008  12/07/2018
[  134.407938] Call Trace:
[  134.407938]  dump_stack+0x57/0x6d
[  134.407938]  panic+0xfb/0x2d7
[  134.407938]  spl_panic+0xcf/0x102 [spl]
[  134.407938]  ? traverse_impl+0x1ca/0x420 [zfs]
[  134.407938]  ? dmu_object_alloc_impl+0x3b4/0x3c0 [zfs]
[  134.407938]  ? dnode_hold+0x1b/0x20 [zfs]
[  134.407938]  dmu_write+0xc3/0xd0 [zfs]
[  134.407938]  ? space_map_alloc+0x55/0x80 [zfs]
[  134.407938]  metaslab_sync+0x61a/0x830 [zfs]
[  134.407938]  ? queued_spin_unlock+0x9/0x10 [zfs]
[  134.407938]  vdev_sync+0x72/0x190 [zfs]
[  134.407938]  spa_sync_iterate_to_convergence+0x160/0x250 [zfs]
[  134.407938]  spa_sync+0x2f7/0x670 [zfs]
[  134.407938]  txg_sync_thread+0x22d/0x2d0 [zfs]
[  134.407938]  ? txg_dispatch_callbacks+0xf0/0xf0 [zfs]
[  134.407938]  thread_generic_wrapper+0x83/0xa0 [spl]
[  134.407938]  kthread+0x104/0x140
[  134.407938]  ? kasan_check_write.constprop.0+0x10/0x10 [spl]
[  134.407938]  ? kthread_park+0x90/0x90
[  134.457802]  ret_from_fork+0x1f/0x40

This change no longer persists the vdev_removing flag when removing slog
devices and also cleans up some code that was added which is not used.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: George Wilson <gwilson@delphix.com>
Closes #14652
2023-03-24 10:27:07 -07:00
Matthew Ahrens d2d4f8554f
Fix prefetching of indirect blocks while destroying
When traversing a tree of block pointers (e.g. for `zfs destroy <fs>` or
`zfs send`), we prefetch the indirect blocks that will be needed, in
`traverse_prefetch_metadata()`.  In the case of `zfs destroy <fs>`, we
do a little traversing each txg, and resume the traversal the next txg.
So the indirect blocks that will be needed, and thus are candidates for
prefetching, does not include blocks that are before the resume point.

The problem is that the logic for determining if the indirect blocks are
before the resume point is incorrect, causing the (up to 1024) L1
indirect blocks that are inside the first L2 to not be prefetched.  In
practice, if we are able to read many more than 1024 blocks per txg,
then this will be inconsequential.  But if i/o latency is more than a
few milliseconds, almost no L1's will be prefetched, so they will be
read serially, and thus the destroying will be very slow.  This can be
observed as `zpool get freeing` decreasing very slowly.

Specifically: When we first examine the L2 that contains the block we'll
be resuming from, we have not yet resumed, so `td_resume` is nonzero.
At this point, all calls to `traverse_prefetch_metadata()` will fail,
even if the L1 in question is after the resume point.  It isn't until
the callback is issued for the resume point that we zero out
`td_resume`, but by this point we've already attempted and failed to
prefetch everything under this L2 indirect block.

This commit addresses the issue by reusing the existing
`resume_skip_check()` to determine if the L1's bookmark is before or
after the resume point.  To do so, this function is made non-mutating
(the caller now zeros `td_resume`).

Note, this bug likely predates (was not introduced by) #11803.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #14603
2023-03-24 10:20:07 -07:00
Pawel Jakub Dawidek ce0e1cc402
Fix cloning into already dirty dbufs.
Undirty the dbuf and destroy its buffer when cloning into it.

Coverity ID: CID-1535375
Reported-by: Richard Yao
Reported-by: Benjamin Coddington
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14655
2023-03-24 10:18:35 -07:00
Pawel Jakub Dawidek 9fa007d35d
Fix build on FreeBSD
Constify some variables after d1807f168e.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by:  Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #14656
2023-03-22 09:24:41 -07:00
Alexander Motin d520f64342
FreeBSD: Remove extra arc_reduce_target_size() call
Remove arc_reduce_target_size() call from arc_prune_task().  The idea
of arc_prune_task() is to remove external references on ARC metadata,
such as vnodes. Since arc_prune_async() is called only from ARC itself,
it makes no sense to create a parasitic loop between ARC eviction and
the pruning, treatening to drop ARC to its minimum.  I can't guess why
it was added as part of FreeBSD to OpenZFS integration.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #14639
2023-03-17 17:31:08 -07:00
Richard Yao fa46802585
Fix possible bad bit shift in dnode_next_offset_level()
031d7c2fe6 did not handle reverse
iteration, such that the original issue theoretically could still occur.

Note that contrary to the claim in the ZFS disk format specification
that a maximum of 6 levels are possible, 9 levels are possible with
recordsize=512 and and indirect block size of 16KB. In this unusual
configuration, span will be 65. The maximum size of span at 70 can be
reached at recordsize=16K and an indirect blocksize of 16KB.

When we are at this indirection level and are traversing backward, the
minimum value is start, but we cannot calculate that with 64-bit
arithmetic, so we avoid the calculation and instead rely on the earlier
statement that did `*offset = start;`.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1466214)
Closes #14618
2023-03-16 14:27:49 -07:00
naivekun 60cfd3bbc2
QAT: Fix uninitialized seed in QAT compression
CpaDcRqResults have to be initialized with checksum=1 for adler32.
Otherwise when error CPA_DC_OVERFLOW occurred, the next compress
operation will continue on previously part-compressed data, and write
invalid checksum data. When zfs decompress the compressed data, a
invalid checksum will occurred and lead to #14463

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Weigang Li <weigang.li@intel.com>
Reviewed-by: Chengfei Zhu <chengfeix.zhu@intel.com>
Signed-off-by: naivekun <naivekun0817@gmail.com>
Closes #14632
Closes #14463
2023-03-16 11:54:10 -07:00
Tino Reichardt fe6a7b787f
Remove unused Edon-R variants
This commit removes the edonr_byteorder.h file and all unused
variants of Edon-R.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #13618
2023-03-14 15:59:58 -07:00
Richard Yao d1807f168e nvpair: Constify string functions
After addressing coverity complaints involving `nvpair_name()`, the
compiler started complaining about dropping const. This lead to a rabbit
hole where not only `nvpair_name()` needed to be constified, but also
`nvpair_value_string()`, `fnvpair_value_string()` and a few other static
functions, plus variable pointers throughout the code. The result became
a fairly big change, so it has been split out into its own patch.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14612
2023-03-14 15:25:50 -07:00
Richard Yao 27ff18cd43 Fix possible NULL pointer dereference in nvlist_lookup_nvpair_ei_sep()
Clang's static analyzer complains about a possible NULL pointer
dereference in nvlist_lookup_nvpair_ei_sep() because it unconditionally
dereferences a pointer initialized by `nvpair_value_nvlist_array()`
under the assumption that `nvpair_value_nvlist_array()` will always
initialize the pointer without checking to see if an error was returned
to indicate otherwise. This itself is improper error handling, so we fix
it. However, fixing it to properly respond to errors is not enough to
avoid a NULL pointer dereference, since we can receive NULL when the
array is empty, so we also add a NULL check.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14612
2023-03-14 15:25:35 -07:00
Richard Yao 47b994049f Silence clang static analyzer warnings about stored stack addresses
Clang's static analyzer complains that nvs_xdr() and nvs_native()
functions return pointers to stack memory. That is technically true, but
the pointers are stored in stack memory from the caller's stack frame,
are not read by the caller and are deallocated when the caller returns,
so this is harmless. We set the pointers to NULL to silence the
warnings.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14612
2023-03-14 15:25:01 -07:00
Richard Yao 3cb293a6f8
Fix possible NULL pointer dereference in dbuf_verify()
Coverity reported a dereference after a NULL check in dbuf_verify(). If
`dn` is `NULL`, we can just assume that !dn->dn_free_txg, so we change
`!dn->dn_free_txg` to `(dn == NULL || !dn->dn_free_txg)`.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-992298)
Closes #14619
2023-03-14 15:00:54 -07:00
Tino Reichardt 3a03c96381
Replace dead opensolaris.org license links
The commit replaces all findings of the link:
http://www.opensolaris.org/os/licensing with this one:
https://opensource.org/licenses/CDDL-1.0

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: WHR <msl0000023508@gmail.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #14625
2023-03-14 14:44:01 -07:00
Richard Yao 24e61911f0 Zero zio_prop_t in flush_write_batch_impl()
After 67a1b03791 was merged, coverity
started complaining about an uninitialized scalar variable in
flush_write_batch_impl() due to the new field zp.zp_brtwrite. Upon
inspection, it appears that uninitialized memory was being copied for
non-raw streams, so this is a pre-existing issue. The addition of
zp_brtwrite by the block cloning commit caused Coverity to begin to
notice it.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1535378)
Closes #14607
2023-03-14 14:41:45 -07:00
Richard Yao 1c212d1b7c Fix uninitialized scalar value read regression in dmu_recv_begin()
da19d919a8 changed this in a way that
permits execution to reach `if (err == 0)` without initializing err.
This could randomly cause the sync task to not execute. We fix that by
initializing err to zero.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1535377)
Closes #14607
2023-03-14 14:40:49 -07:00
Matthew Ahrens 519851122b
ZFS_IOC_COUNT_FILLED does unnecessary txg_wait_synced()
`lseek(SEEK_DATA | SEEK_HOLE)` are only accurate when the on-disk blocks
reflect all writes, i.e. when there are no dirty data blocks.  To ensure
this, if the target dnode is dirty, they wait for the open txg to be
synced, so we can call them "stabilizing operations".  If they cause
txg_wait_synced often, it can be detrimental to performance.

Typically, a group of files are all modified, and then SEEK_DATA/HOLE
are performed on them.  In this case, the first SEEK does a
txg_wait_synced(), and subsequent SEEKs don't need to wait, so
performance is good.

However, if a workload involves an interleaved metadata modification,
the subsequent SEEK may do a txg_wait_synced() unnecessarily.  For
example, if we do a `read()` syscall to each file before we do its SEEK.
This applies even with `relatime=on`, when the `read()` is the first
read after the last write.  The txg_wait_synced() is unnecessary because
the SEEK operations only care that the structure of the tree of indirect
and data blocks is up to date on disk.  They don't care about metadata
like the contents of the bonus or spill blocks.  (They also don't care
if an existing data block is modified, but this would be more involved
to filter out.)

This commit changes the behavior of SEEK_DATA/HOLE operations such that
they do not call txg_wait_synced() if there is only a pending change to
the bonus or spill block.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by:  Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #13368 
Issue #14594 
Issue #14512 
Issue #14009
2023-03-14 14:30:29 -07:00
Attila Fülöp 78289b8458
zcommon: Refactor FPU state handling in fletcher4
Currently calls to kfpu_begin() and kfpu_end() are split between
the init() and fini() functions of the particular SIMD
implementation. This was done in #14247 as an optimization measure
for the ABD adapter. Unfortunately the split complicates FPU
handling on platforms that use a local FPU state buffer, like
Windows and macOS.

To ease porting, we introduce a boolean struct member in
fletcher_4_ops_t, indicating use of the FPU, and move the FPU state
handling from the SIMD implementations to the call sites.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #14600
2023-03-14 09:45:28 -07:00
Pawel Jakub Dawidek 67a1b03791
Implementation of block cloning for ZFS
Block Cloning allows to manually clone a file (or a subset of its
blocks) into another (or the same) file by just creating additional
references to the data blocks without copying the data itself.
Those references are kept in the Block Reference Tables (BRTs).

The whole design of block cloning is documented in module/zfs/brt.c.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes #13392
2023-03-10 11:59:53 -08:00
Paul Dagnelie da19d919a8
Fix incremental receive silently failing for recursive sends
The problem occurs because dmu_recv_begin pulls in the payload and 
next header from the input stream in order to use the contents of 
the begin record's nvlist. However, the change to do that before the 
other checks in dmu_recv_begin occur caused a regression where an 
empty send stream in a recursive send could have its END record 
consumed by this, which broke the logic of recv_skip. A test is 
also included to protect against this case in the future.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #12661
Closes #14568
2023-03-10 09:52:44 -08:00
Richard Yao 7316fdd1c0
txg_sync should handle write errors in ZIL
The txg_sync thread will see certain buffers in a DR_IN_DMU_SYNC state
when ZIL is writing them out. Then it waits until the state changes, but
has an assertion to check that they were not DR_NOT_OVERRIDDEN. If the
data write failed with an error, ZIL will put it into the
DR_NOT_OVERRIDDEN state. It looks like the code will handle that state
without an issue, so we can just delete the assertion.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Sponsored-By: Wasabi Technology, Inc.
Closes #14283
2023-03-10 09:34:00 -08:00
Richard Yao 950980b4c4 Suppress clang static analyzer warning in vdev_stat_update()
63652e1546 added unnecessary branches in
`vdev_stat_update()` to suppress an ASAN false positive the breaks
ztest. This had the downside of causing false positive reports in both
Coverity and Clang's static analyzer. vd is never NULL, so we add a
preprocessor check to only apply the workaround when compiling with ASAN
support.

Reported-by: Coverity (CID-1524583)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:52:24 -08:00
Richard Yao 08641d9007 Suppress static analyzer warning in dmu_objset_create_impl_dnstats()
ae7e700650 added an assertion to suppress
a complaint from Clang's static analyzer. Unfortunately, it missed
another way for Clang to complain about this function. This adds another
assertion to handle that.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:52:15 -08:00
Richard Yao 703283fabd Linux: Fix octal detection in define_ddi_strtox()
Clang Tidy reported this as a misc-redundant-expression because writing
`8` instead of `'8'` meant that the condition could never be true.

The only place where we have a chance of this being a bug would be in
nvlist_lookup_nvpair_ei_sep(). I am not sure if we ever pass an octal to
that, but if we ever do, it should work properly now instead of failing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:52:09 -08:00
Richard Yao 66a38fd10a Linux: Suppress clang static analyzer warning in zfs_remove()
Clang's static analyzer points out that if we fail to find an extended
attribute directory, but somehow find it when calculating delete_now and
delete_now is true, we will have a NULL pointer dereference when we try
to unlink the extended attribute directory.

I am not sure if this is possible, but if it is, I do not see a sane way
of handling this other than rolling back the transaction and retrying.
For now, let us do an VERIFY_IMPLY(). If this trips, it will stop the
transaction from committing, which will prevent an attribute directory
leak.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:52:04 -08:00
Richard Yao c2550a136e Linux: Silence static analyzer warning in crypto_create_ctx_template()
A CodeChecker report from Clang's CTU analysis indicated that we were
assigning uninitialized values in crypto_create_ctx_template() when we
call it from zio_crypt_key_init(). This occurs because the ->cm_param
and ->cm_param_len fields are uninitialized. Thankfully, the
uninitialized values are only used in the skein via
KCF_PROV_CREATE_CTX_TEMPLATE() -> skein_create_ctx_template() ->
skein_mac_ctx_build() -> skein_get_digest_bitlen(), but that should not
be called from here. We fix this to avoid a possible trap should this
code change in the future.

The FreeBSD version of zio_crypt_key_init() is unaffected.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:51:59 -08:00
Richard Yao 51f55742f6 Suppress Clang Static Analyzer warning in bpobj_enqueue()
scan-build does not do cross translation unit analysis to realize that
`dmu_buf_hold()` will always set `bpo->bpo_cached_dbuf` to a non-NULL
pointer, so we add an assertion to make it realize this.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:51:55 -08:00
Richard Yao 45c446308a Suppress Clang Static Analyzer warning in dsl_dir_rename_sync()
Clang's static analyzer reports that if we try to rename a root dataset
in `dsl_dir_rename_sync()`, we will have a NULL pointer passed to
strlcpy(). This is impossible because `dsl_dir_rename_check()` will
prevent us from doing this. We add an assertion to silence this warning.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:51:50 -08:00
Richard Yao 17443e0b20 Cleanup: Remove constant comparisons reported by CodeQL
CodeQL's cpp/constant-comparison query from its security-and-extended
query set reported 4 instances where we have comparions that always
evaluate the same way.

In `draid_config_by_type()`, we have an early `if (nparity == 0)` check
that returns `EINVAL`, making a later `if (nparity == 0 || nparity >
VDEV_DRAID_MAXPARITY)` partially redundant. The later check prints an
error message when parity is 0, but the early check does not. This is
not useful feedback, so we move the later check to the place where the
early check runs to replace the early check.

In `perform_thread_merge()`, we return when `num_threads == 0`. After
that block, we do `if (num_threads > 0) {`, which will always be true.
We remove the `if` statement.

In `sa_modify_attrs()`, we have a loop condition that is `k != 2`, but
at the end of the loop, we have `if (k == 0 && hdl->sa_spill)` followed
by an else that does a break. The result is that k != 2 will never be
evaluated when it is false. We drop the comparison.

In `zap_leaf_array_read()`, we have a for loop condition that is `i <
ZAP_LEAF_ARRAY_BYTES && len > 0`. However, that loop itself is in a loop
that is `while (len > 0)` and while the value of len is decremented
inside the loop, when `len == 0`, it will return, such that `len > 0`
inside the loop condition will always be true. We drop that part of the
condition.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:51:46 -08:00
Richard Yao 5dd0f019cd Linux cleanup: zvol_discard() should only call blk_queue_io_stat() once
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:51:40 -08:00
Richard Yao f9e109223b Suppress Clang Static Analyzer warning in dbuf_dnode_findbp()
Clang's static analyzer reports that if a `blkid == DMU_SPILL_BLKID` is
passed, then we can have a NULL pointer dereference when either
->dn_have_spill or `DNODE_FLAG_SPILL_BLKPTR` is not set. This should not
happen. We add an `ASSERT()` to suppress reports about NULL pointer
dereferences.

Originally, I wanted to use one or two IMPLY statements on
pre-conditions before the call to `dbuf_findbp()`, but Clang's static
analyzer did not understand it.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:51:36 -08:00
Richard Yao 399bb81607 Suppress Clang Static Analyzer warning in vdev_split()
Clang's static analyzer pointed out that we can have a NULL pointer
dereference if we ever attempt to split a vdev that has only 1 child. If
that happens, we are left with zero children, but then try to access a
non-existent child. Calling vdev_split() on a vdev with only 1 child
should be impossible due to how the code is structured. If this ever
happens, it would be best to stop execution immediately even in a
production environment to allow for the best possible chance of recovery
by an expert, so we use `VERIFY3U()` instead of `ASSERT3U()`.

Unfortunately, while that defensive assertion will prevent execution
from ever reaching the NULL pointer dereference, Clang's static analyzer
does not realize that, so we add an `ASSERT()` to inform it of this.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:51:31 -08:00
Richard Yao a4240a8ac7 Suppress Clang Static Analyzer false positive in the AVL tree code.
This has been filed as llvm/llvm-project#60694. Switching from a copy
through a C pointer dereference to an explicit memcpy() is a workaround
that prevents a false positive.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:51:21 -08:00
Richard Yao 8b72dfed11 Suppress Clang Static Analyzer defect report in abd_get_size()
Clang's static analyzer reports a possible NULL pointer dereference in
abd_get_size() when called from vdev_draid_map_alloc_write() called from
vdev_draid_map_alloc_row() and vdc->vdc_nparity == 0. This should be
impossible, so we add an assertion to silence the defect report.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14575
2023-03-08 13:51:09 -08:00
Alexander Motin a8d83e2a24
More adaptive ARC eviction
Traditionally ARC adaptation was limited to MRU/MFU distribution.  But
for years people with metadata-centric workload demanded mechanisms to
also manage data/metadata distribution, that in original ZFS was just
a FIFO.  As result ZFS effectively got separate states for data and
metadata, minimum and maximum metadata limits etc, but it all required
manual tuning, was not adaptive and in its heart remained a bad FIFO.

This change removes most of existing eviction logic, rewriting it from
scratch.  This makes MRU/MFU adaptation individual for data and meta-
data, same as the distribution between data and metadata themselves.
Since most of required states separation was already done, it only
required to make arcs_size state field specific per data/metadata.

The adaptation logic is still based on previous concept of ghost hits,
just now it balances ARC capacity between 4 states: MRU data, MRU
metadata, MFU data and MFU metadata.  To simplify arc_c changes instead
of arc_p measured in bytes, this code uses 3 variable arc_meta, arc_pd
and arc_pm, representing ARC balance between metadata and data, MRU and
MFU for data, and MRU and MFU for metadata respectively as 32-bit fixed
point fractions.  Since we care about the math result only when need to
evict, this moves all the logic from arc_adapt() to arc_evict(), that
reduces per-block overhead, since per-block operations are limited to
stats collection, now moved from arc_adapt() to arc_access() and using
cheaper wmsums.  This also allows to remove ugly ARC_HDR_DO_ADAPT flag
from many places.

This change also removes number of metadata specific tunables, part of
which were actually not functioning correctly, since not all metadata
are equal and some (like L2ARC headers) are not really evictable.
Instead it introduced single opaque knob zfs_arc_meta_balance, tuning
ARC's reaction on ghost hits, allowing administrator give more or less
preference to metadata without setting strict limits.

Some of old code parts like arc_evict_meta() are just removed, because
since introduction of ABD ARC they really make no sense: only headers
referenced by small number of buffers are not evictable, and they are
really not evictable no matter what this code do.  Instead just call
arc_prune_async() if too much metadata appear not evictable.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #14359
2023-03-08 11:17:23 -08:00
Attila Fülöp 8d9752569b
ICP: AES-GCM: Unify gcm_init_ctx() and gmac_init_ctx()
gmac_init_ctx() duplicates most of the code in gcm_int_ctx() while
it just needs to set its own IV length and AAD tag length.

Introduce gcm_init_ctx_impl() which handles the GCM and GMAC
differences while reusing the duplicated code.

While here, fix a flaw where the AVX implementation would accept a
context using a byte swapped key schedule which it could not
handle. Also constify the IV and AAD pointers passed to
gcm_init{,_avx}().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #14529
2023-03-08 11:12:15 -08:00
Richard Yao 7d638df09b
Do not hold spa_config in ZIL while blocked on IO
Otherwise, we can get a deadlock that looks like this:

1. fsync() grabs spa_config_enter(zilog->zl_spa, SCL_STATE, lwb,
RW_READER) as part of zil_lwb_write_issue() . It then blocks on the
txg_sync when a flush fails from a drive power cycling.

2. The txg_sync then blocks on the pool suspending due to the loss of
too many disks.

3. zpool clear then blocks on spa_config_enter(spa, SCL_STATE |
SCL_L2ARC | SCL_ZIO, spa, RW_WRITER)  because it is a writer.

The disks cannot be brought online due to fsync() holding that lock and
the user gets upset since fsync() is uninterruptibly blocked inside the
kernel.

We need to grab the lock for vdev_lookup_top(), but we do not need to
hold it while there is outstanding IO.

This fixes a regression introduced by
1ce23dcaff.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Sponsored-By: Wasabi Technology, Inc.
Closes #14519
2023-03-07 16:12:28 -08:00
Rob N b988f32c70
Better handling for future crypto parameters
The intent is that this is like ENOTSUP, but specifically for when
something can't be done because we have no support for the requested
crypto parameters; eg unlocking a dataset or receiving a stream
encrypted with a suite we don't support.

Its not intended to be recoverable without upgrading ZFS itself.
If the request could be made to work by enabling a feature or modifying
some other configuration item, then some other code should be used.

load-key: In the future we might have more crypto suites (ie new values
for the `encryption` property. Right now trying to load a key on such
a future crypto suite will look up suite parameters off the end of the
crypto table, resulting in misbehaviour and/or crashes (or, with debug
enabled, trip the assertion in `zio_crypt_key_unwrap`).

Instead, lets check the value we got from the dataset, and if we can't
handle it, abort early.

recv: When receiving a raw stream encrypted with an unknown crypto
suite, `zfs recv` would report a generic `invalid backup stream`
(EINVAL). While technically correct, its not super helpful, so lets
ship a more specific error code and message.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #14577
2023-03-07 14:05:14 -08:00
Andriy Gapon a55254be7a
[FreeBSD] fix false assert in cache_vop_rmdir when replaying ZIL
The assert is enabled when DEBUG_VFS_LOCKS kernel option is set.
The exact panic is:
    panic: condition seqc_in_modify(_vp->v_seqc) not met
It happens because seqc protocol is not followed for ZIL replay.

But we actually do not need to make any namecache calls at that stage,
because the namecache use is not enabled until after the replay is
completed.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Closes #14566
2023-03-07 13:48:43 -08:00
Tino Reichardt 84a1c48c86
Fix detection of IBM Power8 machines (ISA 2.07)
An IBM POWER7 system with Power ISA 2.06 tried to execute
zfs_sha256_power8() - which should only be run on ISA 2.07
machines.

The detection is implemented via the zfs_isa207_available() call,
but this check was not used.

This pull request will fix this.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Low-power <msl0000023508@gmail.com>
Closes #14576
2023-03-06 17:01:01 -08:00
Andriy Gapon 28bf26acb6
[FreeBSD] zfs_znode_alloc: lock the vnode earlier
This is needed because of a possible error path where zfs_vnode_forget()
is called.  That function calls vgone() and vput(), the former requires
the vnode to be exclusively locked and the latter expects it to be
locked.

It should be safe to lock the vnode as early as possible because it is
not yet visible, so there is no interaction with other locks.

While here, remove a tautological assignment to 'vp'.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Closes #14565
2023-03-06 16:30:54 -08:00
George Amanakis ca9e32d3a7
Optimize the is_l2cacheable functions
by placing the most common use case (no special vdevs) first and avoid
allocating new variables.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14494 
Closes #14563
2023-03-06 16:13:05 -08:00
Richard Yao b79e7114bb Add missing increment to dsl_deadlist_move_bpobj()
dc5c8006f6 was recently merged to prefetch
up to 128 deadlists. Unfortunately, a loop was missing an increment,
such that it will prefetch all deadlists. The performance properties of
that patch probably should be re-evaluated.

This was caught by CodeQL's cpp/constant-comparison check in an
experimental branch where I am testing the security-and-extended
queries. It complained about the `i < 128` part of the loop condition
always evaluating to the same thing. The standard CodeQL configuration
we use missed this because it does not include that check.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14573
2023-03-06 15:28:26 -08:00
Richard Yao 8846139b45 SHA2Init() should use signed assertions when checking an enum
The recent 4c5fec01a4 commit caused
Coverity to report that ASSERT3U(algotype, >=, SHA256_MECH_INFO_TYPE);
is always true. That is because the signed algotype and signed
SHA256_MECH_INFO_TYPE values were cast to unsigned types. To fix this,
we switch the assertions to use ASSERT3S(), which retains the signedness
of the original values for the comparison.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1535300)
Closes #14573
2023-03-06 15:26:43 -08:00
Jorgen Lundman 47119d60ef
Restore ASMABI and other Unify work
Make sure all SHA2 transform function has wrappers

For ASMABI to work, it is required the calling convention
is consistent.

Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Joergen Lundman <lundman@lundman.net>
Closes #14569
2023-03-06 15:24:05 -08:00
Tino Reichardt 620a977f22 Use SECTION_STATIC macro for sha2 x86_64 assembly
- instead of ".section .rodata" we should use SECTION_STATIC

Tested-by: Rich Ercolani <rincebrain@gmail.com>
Tested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #13741
2023-03-02 13:52:33 -08:00
Tino Reichardt f9f9bef22f Update BLAKE3 for using the new impl handling
This commit changes the BLAKE3 implementation handling and
also the calls to it from the ztest command.

Tested-by: Rich Ercolani <rincebrain@gmail.com>
Tested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #13741
2023-03-02 13:52:27 -08:00
Tino Reichardt 4c5fec01a4 Add generic implementation handling and SHA2 impl
The skeleton file module/icp/include/generic_impl.c can be used for
iterating over different implementations of algorithms.

It is used by SHA256, SHA512 and BLAKE3 currently.

The Solaris SHA2 implementation got replaced with a version which is
based on public domain code of cppcrypto v0.10.

These assembly files are taken from current openssl master:
- sha256-x86_64.S: x64, SSSE3, AVX, AVX2, SHA-NI (x86_64)
- sha512-x86_64.S: x64, AVX, AVX2 (x86_64)
- sha256-armv7.S: ARMv7, NEON, ARMv8-CE (arm)
- sha512-armv7.S: ARMv7, NEON (arm)
- sha256-armv8.S: ARMv7, NEON, ARMv8-CE (aarch64)
- sha512-armv8.S: ARMv7, ARMv8-CE (aarch64)
- sha256-ppc.S: Generic PPC64 LE/BE (ppc64)
- sha512-ppc.S: Generic PPC64 LE/BE (ppc64)
- sha256-p8.S: Power8 ISA Version 2.07 LE/BE (ppc64)
- sha512-p8.S: Power8 ISA Version 2.07 LE/BE (ppc64)

Tested-by: Rich Ercolani <rincebrain@gmail.com>
Tested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #13741
2023-03-02 13:52:21 -08:00
Tino Reichardt 3e254aaad0 Remove old or redundant SHA2 files
We had three sha2.h headers in different places.
The FreeBSD version, the Linux version and the generic solaris version.

The only assembly used for acceleration was some old x86-64 openssl
implementation for sha256 within the icp module.

For FreeBSD the whole SHA2 files of FreeBSD were copied into OpenZFS,
these files got removed also.

Tested-by: Rich Ercolani <rincebrain@gmail.com>
Tested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes #13741
2023-03-02 13:50:21 -08:00
Alexander Motin 5f42d1dbf2
System-wide speculative prefetch limit.
With some pathological access patterns it is possible to make ZFS
accumulate almost unlimited amount of speculative prefetch ZIOs.
Combined with linear ABD allocations in RAIDZ code, it appears to
be possible to exhaust system KVA, triggering kernel panic.

Address this by introducing a system-wide counter of active prefetch
requests and blocking prefetch distance doubling per stream hits if
the number of active requests is higher that ~6% of ARC size.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:  Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14516
2023-03-01 15:27:40 -08:00
Richard Yao 4c856fb333
Fix data race between zil_commit() and zil_suspend()
openzfsonwindows/openzfs#206 found that it is possible to trip
`VERIFY(list_is_empty(&lwb->lwb_itxs))` when a `zil_commit()` is delayed
by the scheduler long enough for a parallel `zil_suspend()` operation to
exit `zil_commit_impl()`. This is a data race. To prevent this, we
introduce a `zilog->zl_suspend_lock` rwlock to ensure that all
outstanding `zil_commit()` operations finish before `zil_suspend()`
begins and that subsequent operations fallback to `txg_wait_synced()`
after `zil_suspend()` has begun.

On `PREEMPT_RT` Linux kernels, the `rw_enter()` implementation suffers
from writer starvation. This means that a ZIL intensive system can delay
`zil_suspend()` indefinitely. This is a pre-existing problem that
affects everything that uses rw locks, so it needs to be addressed in
the SPL.  However, builds against `PREEMPT_RT` Linux kernels are
currently broken due to a GPL symbol issue (#11097), so we can safely
disregard that issue for now.

Reported-by: Arun KV <arun.kv@datacore.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14514
2023-03-01 13:23:09 -08:00
Richard Yao 9fd5fedc67
Remove bad kmem_free() oversight from previous zfsdev_state_list patch
I forgot to remove the corresponding kmem_free() from zfs_kmod_fini() in
9a14ce43c3. Clang's static analyzer did
not complain, but the Coverity scan that was run after the patch was
merged did.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1535275)
Closes #14556
2023-03-01 13:20:53 -08:00
Richard Yao dd108f5d73
Linux: zfs_fillpage() should handle partial pages from end of file
After 89cd2197b9 was merged, Clang's
static analyzer began complaining about a dead assignment in
`zfs_fillpage()`. Upon inspection, I noticed that the dead assignment
was because we are not using the calculated io_len that we should use to
avoid asking the DMU to read past the end of a file. This should result
in `dmu_buf_hold_array_by_dnode()` calling `zfs_panic_recover()`.

This issue predates 89cd2197b9, but its
simplification of zfs_fillpage() eliminated the only use of the
assignment to io_len, which made Clang's static analyzer complain about
the issue.

Also, as a precaution, we add an assertion that io_offset < i_size. If
this ever fails, bad things will happen. Otherwise, we are blindly
trusting the kernel not to give us invalid offsets. We continue to
blindly trust it on non-debug kernels.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14534
2023-03-01 13:19:47 -08:00
Richard Yao 3a7c35119e
Handle unexpected errors in zil_lwb_commit() without ASSERT()
We tripped `ASSERT(error == ENOENT || error == EEXIST || error ==
EALREADY)` in `zil_lwb_commit()` at Klara when doing robustness testing
of ZIL against drive power cycles.

That assertion presumably exists because when this code was written, the
only errors expected from here were EIO, ENOENT, EEXIST and EALREADY,
with EIO having its own handling before the assertion. However, upon
doing a manual depth first search traversal of the source tree, it turns
out that a large number of unexpected errors are possible here. In
theory, EINVAL and ENOSPC can come from dnode_hold_impl(). However, most
unexpected errors originate in the block layer and come to us from
zio_wait() in various ways. One way is ->zl_get_data() -> dmu_buf_hold()
-> dbuf_read() -> zio_wait().

From vdev_disk.c on Linux alone, zio_wait() can return the unexpected
errors ENXIO, ENOTSUP, EOPNOTSUPP, ETIMEDOUT, ENOSPC, ENOLINK,
EREMOTEIO, EBADE, ENODATA, EILSEQ and ENOMEM

This was only observed after what have been likely over 1000 test
iterations, so we do not expect to reproduce this again to find out what
the error code was. However, circumstantial evidence suggests that the
error was ENXIO.

When ENXIO or any other unexpected error occurs, the `fsync()` or
equivalent operation that called zil_commit() will return success, when
in fact, dirty data has not been committed to stable storage. This is a
violation of the Single UNIX Specification.

The code should be able to handle this and any other unknown error by
calling `txg_wait_synced()`. In addition to changing the code to call
txg_wait_synced() on unexpected errors instead of returning, we modify
it to print information about unexpected errors to dmesg.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Sponsored-By: Wasabi Technology, Inc.
Closes #14532
2023-03-01 09:39:41 -08:00
Allan Jude cbd76b4032
Makefile.bsd: cleanup and sync with FreeBSD
xxhash.c was not being compiled, so when FreeBSD's kernel
switched to a newer version of ZSTD a few weeks ago, out-of-tree ZFS
failed to build

Sync module/Makefile.bsd with FreeBSD's sys/modules/zfs/Makefile

And restore the alphabetical sort in a number of places

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Sponsored-by: Klara, Inc.
Closes #14508
2023-02-28 17:33:59 -08:00
Richard Yao ae7e700650 Suppress static analyzer warning in dmu_objset_create_impl_dnstats()
Clang's static analyzer claims that dereferencing ds in
dmu_objset_create_impl_dnstats() could cause a NULL pointer dereference
when a previous NULL check confirms that it is NULL. It is only NULL on
the MOS, for which dmu_objset_userused_enabled(os) should always return
false, so ds will never be dereferenced when it is NULL. We add an
assertion to suppress this warning.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14470
2023-02-28 17:31:58 -08:00
Richard Yao 5cc4950901 Suppress static analyzer warning in dbuf_hold_copy()
Clang's static analyzer claims that dbuf_hold_copy() will have a NULL
pointer dereference in data->b_data when called by dbuf_hold_impl().
This is impossible because data is dr->dt.dl.dr_data, which is non-NULL
whenever db->db_level == 0, which is always the case whenever
dbuf_hold_impl() calls dbuf_hold_copy(). We add an assertion to suppress
the complaint.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14470
2023-02-28 17:31:50 -08:00
Richard Yao 9a14ce43c3 Statically allocate first node of zfsdev_state_list
This avoids a call to kmem_alloc() during module load. It also
suppresses a defect report from Clang's static analyzer that claims that
we will have a NULL pointer dereference in zfsdev_state_init() because
it does not understand that this has already been allocated in
zfs_kmod_init().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14470
2023-02-28 17:31:41 -08:00
Richard Yao 7fc48f8378 Suppress static analyzer warning in sa_attr_iter()
Clang's static analyzer points out that when IS_SA_BONUSTYPE(type) is
true and .sa_length is 0 for an attribute, we have a NULL pointer
dereference. We suppress this with an IMPLY() statement.

This was also identified by Coverity.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1017954)
Closes #14470
2023-02-28 17:31:30 -08:00
Richard Yao 4d9bb5514c Suppress static analyzer warnings in zio_checksum_error_impl()
Clang's static analyzer informs us of multiple NULL pointer dereferences
involving zio_checksum_error_impl().

The first is a NULL pointer dereference if bp is NULL and ci->ci_flags &
ZCHECKSUM_FLAG_EMBEDDED is false, but bp is NULL implies that
ci->ci_flags & ZCHECKSUM_FLAG_EMBEDDED is true, so we add an IMPLY()
statement to suppress the report.

The second and third are identical, and are duplicated because while the
NULL pointer dereference occurs in zio_checksum_gang_verifier(), it is
called by zio_checksum_error_impl() and there is a report for each of
the two functions. The reports state that when bp is NULL, ci->ci_flags
& ZCHECKSUM_FLAG_EMBEDDED is true and checksum is not
ZIO_CHECKSUM_LABEL, we also have a NULL pointer dereference. bp is NULL
should imply that checksum == ZIO_CHECKSUM_LABEL, so we add an IMPLY()
statement to suppress the second report. The two reports are
functionally identical.

A fourth variation of this was also reported by Coverity. It occurs when
checksum == ZIO_CHECKSUM_ZILOG2.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reported-by: Coverity (CID-1524672)
Closes #14470
2023-02-28 17:31:08 -08:00
Richard Yao d634d20d1b
icp: Prevent compilers from optimizing away memset() in gcm_clear_ctx()
The recently merged f58e513f74 was
intended to zero sensitive data before exit from encryption
functions to harden the code against theoretical information
leaks. Unfortunately, the method by which it did that is
optimized away by the compiler, so some information still leaks. This
was confirmed by counting function calls in disassembly.

After studying how the OpenBSD, FreeBSD and Linux kernels handle this,
and looking at our disassembly, I decided on a two-factor approach to
protect us from compiler dead store elimination passes.

The first factor is to stop trying to inline gcm_clear_ctx(). GCC does
not actually inline it in the first place, and testing suggests that
dead store elimination passes appear to become more powerful in a bad
way when inlining is forced, so we recognize that and move
gcm_clear_ctx() to a C file.

The second factor is to implement an explicit_memset() function based on
the technique used by `secure_zero_memory()` in FreeBSD's blake2
implementation, which coincidentally is functionally identical to the
one used by Linux. The source for this appears to be a LLVM bug:

https://llvm.org/bugs/show_bug.cgi?id=15495

Unlike both FreeBSD and Linux, we explicitly avoid the inline keyword,
based on my observations that GCC's dead store elimination pass becomes
more powerful when inlining is forced, under the assumption that it will
be equally powerful when the compiler does decide to inline function
calls.

Disassembly of GCC's output confirms that all 6 memset() calls are
executed with this patch applied.

Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14544
2023-02-28 17:28:50 -08:00
George Amanakis 13ff72ba0a
Revert zfeature_active() to static
Commit 34ce4c4 made zfeature_active() non-static. This is not required.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14546
2023-02-28 14:03:52 -08:00
John Poduska 73c383f541
Prevent incorrect datasets being mounted
During a mount, zpl_mount_impl(), uses sget() with the callback
zpl_test_super() to find a super_block with a matching objset,
stored in z_os. It does so without taking the teardown lock on
the zfsvfs.

The problem is that operations like rollback will replace the
z_os. And, there is a window where the objset in the rollback
is freed, but z_os still points to it. Then, a mount like
operation, for instance a clone, can reallocate that exact same
pointer and zpl_test_super() will then match the super_block
associated with the rollback as opposed to the clone.

This fix tests for a match and if so, takes the teardown lock
before doing the final match test.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Poduska <jpoduska@datto.com>
Closes #14518
2023-02-27 16:49:34 -08:00
Richard Yao bff26b0220
Skip memory allocation when compressing holes
Hole detection in the zio compression code allows us to
opportunistically skip compression on holes. We can go a step further
by not doing memory allocations on holes either.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Sponsored-by: Wasabi Technology, Inc.
Closes #14500
2023-02-27 14:41:02 -08:00
Attila Fülöp f58e513f74
ICP: AES-GCM: Refactor gcm_clear_ctx()
Currently the temporary buffer in which decryption takes place
isn't cleared on context destruction. Further in some routines we
fail to call gcm_clear_ctx() on error exit. Both flaws may result
in leaking sensitive data.

We follow best practices and zero out the plaintext buffer before
freeing the memory holding it. Also move all cleanup into
gcm_clear_ctx() and call it on any context destruction.

The performance impact should be negligible.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes #14528
2023-02-27 14:38:12 -08:00
Mariusz Zaborski 3b9309aabe
Move zap_attribute_t to the heap in dsl_deadlist_merge
In the case of a regular compilation, the compiler
raises a warning for a dsl_deadlist_merge function, that
the stack size is to large. In debug build this can
generate an error.

Move large structures to heap.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes #14524
2023-02-27 14:27:58 -08:00
George Amanakis d816bc5ec7
Move dmu_buf_rele() after dsl_dataset_sync_done()
Otherwise the dataset may be freed after the last dmu_buf_rele() leading
to a panic.

Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14522
Closes #14523
2023-02-23 18:14:52 -07:00
Brian Behlendorf 89cd2197b9
Fix buffered/direct/mmap I/O race
When a page is faulted in for memory mapped I/O the page lock
may be dropped before it has been read and marked up to date.
If a buffered read encounters such a page in mappedread() it
must wait until the page has been updated. Failure to do so
will result in a panic on debug builds and incorrect data on
production builds.

The critical part of this change is in mappedread() where pages
which are not up to date are now handled. Additionally, it
includes the following simplifications.

- zfs_getpage() and zfs_fillpage() could be passed an array of
  pages. This could be more efficient if it was used but in
  practice only a single page was ever provided. These
  interfaces were simplified to acknowledge that.

- update_pages() was modified to correctly set the PG_error bit
  on a page when it cannot be read by dmu_read().

- Setting PG_error and PG_uptodate was moved to zfs_fillpage()
  from zpl_readpage_common(). This is consistent with the
  handling in update_pages() and mappedread().

- Minor additional refactoring to comments and variable
  declarations to improve readability.

- Add a test case to exercise concurrent buffered, direct,
  and mmap IO to the same file.

- Reduce the mmap_sync test case default run time.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #13608 
Closes #14498
2023-02-23 10:57:24 -08:00
Richard Yao 7cb67d627c
Fix NULL pointer dereference in zio_ready()
Clang's static analyzer correctly identified a NULL pointer dereference
in zio_ready() when ZIO_FLAG_NODATA has been set on a zio that is
missing a block pointer. The NULL pointer dereference occurs because we
have logic intended to disable ZIO_FLAG_NODATA when it has been set on a
gang block.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14469
2023-02-23 10:19:08 -08:00
Richard Yao c9e39da9a4
Use rw_tryupgrade() in dmu_bonus_hold_by_dnode()
When dn->dn_bonus == NULL, dmu_bonus_hold_by_dnode() will unlock its
read lock on dn->dn_struct_rwlock and grab a write lock. This can be
micro-optimized by calling rw_tryupgrade().

Linux will not benefit from this since it does not support rwlock
upgrades, but FreeBSD will.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14517
2023-02-22 16:33:23 -08:00
rob-wing 28251d81d7
FreeBSD: don't verify recycled vnode for zfs control directory
Under certain loads, the following panic is hit:

    panic: page fault
    KDB: stack backtrace:
    #0 0xffffffff805db025 at kdb_backtrace+0x65
    #1 0xffffffff8058e86f at vpanic+0x17f
    #2 0xffffffff8058e6e3 at panic+0x43
    #3 0xffffffff808adc15 at trap_fatal+0x385
    #4 0xffffffff808adc6f at trap_pfault+0x4f
    #5 0xffffffff80886da8 at calltrap+0x8
    #6 0xffffffff80669186 at vgonel+0x186
    #7 0xffffffff80669841 at vgone+0x31
    #8 0xffffffff8065806d at vfs_hash_insert+0x26d
    #9 0xffffffff81a39069 at sfs_vgetx+0x149
    #10 0xffffffff81a39c54 at zfsctl_snapdir_lookup+0x1e4
    #11 0xffffffff8065a28c at lookup+0x45c
    #12 0xffffffff806594b9 at namei+0x259
    #13 0xffffffff80676a33 at kern_statat+0xf3
    #14 0xffffffff8067712f at sys_fstatat+0x2f
    #15 0xffffffff808ae50c at amd64_syscall+0x10c
    #16 0xffffffff808876bb at fast_syscall_common+0xf8

The page fault occurs because vgonel() will call VOP_CLOSE() for active
vnodes. For this reason, define vop_close for zfsctl_ops_snapshot. While
here, define vop_open for consistency.

After adding the necessary vop, the bug progresses to the following
panic:

    panic: VERIFY3(vrecycle(vp) == 1) failed (0 == 1)
    cpuid = 17
    KDB: stack backtrace:
    #0 0xffffffff805e29c5 at kdb_backtrace+0x65
    #1 0xffffffff8059620f at vpanic+0x17f
    #2 0xffffffff81a27f4a at spl_panic+0x3a
    #3 0xffffffff81a3a4d0 at zfsctl_snapshot_inactive+0x40
    #4 0xffffffff8066fdee at vinactivef+0xde
    #5 0xffffffff80670b8a at vgonel+0x1ea
    #6 0xffffffff806711e1 at vgone+0x31
    #7 0xffffffff8065fa0d at vfs_hash_insert+0x26d
    #8 0xffffffff81a39069 at sfs_vgetx+0x149
    #9 0xffffffff81a39c54 at zfsctl_snapdir_lookup+0x1e4
    #10 0xffffffff80661c2c at lookup+0x45c
    #11 0xffffffff80660e59 at namei+0x259
    #12 0xffffffff8067e3d3 at kern_statat+0xf3
    #13 0xffffffff8067eacf at sys_fstatat+0x2f
    #14 0xffffffff808b5ecc at amd64_syscall+0x10c
    #15 0xffffffff8088f07b at fast_syscall_common+0xf8

This is caused by a race condition that can occur when allocating a new
vnode and adding that vnode to the vfs hash. If the newly created vnode
loses the race when being inserted into the vfs hash, it will not be
recycled as its usecount is greater than zero, hitting the above
assertion.

Fix this by dropping the assertion.

FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=252700
Reviewed-by: Andriy Gapon <avg@FreeBSD.org>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Alek Pinchuk <apinchuk@axcient.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Rob Wing <rob.wing@klarasystems.com>
Co-authored-by: Rob Wing <rob.wing@klarasystems.com>
Submitted-by: Klara, Inc.
Sponsored-by: rsync.net
Closes #14501
2023-02-21 17:26:33 -08:00
Allan Jude 1d56c6d017
Fix per-jail zfs.mount_snapshot setting
When jail.conf set the nopersist flag during startup, it was
incorrectly destroying the per-jail ZFS settings.

Reported-by: Martin Matuska <mm@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Sponsored-by: Modirum MDPay
Sponsored-by: Klara, Inc.
Closes #14509
2023-02-21 17:23:01 -08:00
George Amanakis 0f32b1f728
Partially revert eee9362a7
With commit 34ce4c42f applied, there is no need for eee9362a7.
Revert that aside from the test. All tests introduced in those commits
pass.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #14502
2023-02-21 09:36:22 -08:00
Richard Yao 9f08b6e31f
Sync thread should avoid holding the spa config write lock when possible
spa_sync() currently grabs the write lock due to an old hack that is
documented by a comment:

    We need the write lock here because, for aux vdevs,
    calling vdev_config_dirty() modifies sav_config.
    This is ugly and will become unnecessary when we
    eliminate the aux vdev wart by integrating all vdevs
    into the root vdev tree.
 
This has lead to deadlocks in rare edge cases from holding the write 
lock. We can reduce incidence of these deadlocks by not grabbing the 
write lock on pools without auxillary vdevs.

Sponsored-By: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@klarasystems.com>
Closes #14282
2023-02-16 14:10:52 -08:00
Paul Dagnelie dc72c60ec1
zfs redact fails when dnodesize=auto
Add handling to dmu_object_next for the case where *objectp == 0.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #14479
2023-02-16 09:23:39 -08:00
Richard Yao f04cb31e7c
Suppress Clang static analyzer complaint in zfs_replay_create()
Clang's static analyzer incorrectly complains about an undefined value
here when lr->lr_common.lrc_txtype == TX_SYMLINK and txtype ==
TX_CREATE. This is impossible, because of this line:

txtype = (lr->lr_common.lrc_txtype & ~TX_CI((uint64_t)0x1 << 63));

Changing the code to compare against txtype suppresses the report.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14472
2023-02-14 11:05:41 -08:00
Brian Behlendorf 3fc92adc40
Linux: use filemap_range_has_page()
As of the 4.13 kernel filemap_range_has_page() can be used to
check if there is a page mapped in a given file range.  When
available this interface should be used which eliminates the
need for the zp->z_is_mapped boolean.

Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14493
2023-02-14 11:04:34 -08:00
Richard Yao ab672133a9
Give strlcat() full buffer lengths rather than smaller buffer lengths
strlcat() is supposed to be given the length of the destination buffer,
including the existing contents. Unfortunately, I had been overzealous
when I wrote a51288aabb, since I gave it
the length of the destination buffer, minus the existing contents. This
likely caused a regression on large strings.

On the topic of being overzealous, the use of strlcat() in
dmu_send_estimate_fast() was unnecessary because recv_clone_name is a
fixed length string. We continue using strlcat() mostly as defensive
programming, in case the string length is ever changed, even though it
is unnecessary.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14476
2023-02-14 11:03:42 -08:00
Rich Ercolani cfd57573ff
quick fix for lingering snapdir unmount problems
Unfortunately, even after e79b6807, I still, much more rarely,
tripped asserts when playing with many ctldir mounts at once.

Since this appears to happen if we dispatched twice too fast, just
ignore it. We don't actually need to do anything if someone already
started doing it for us.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #14462
2023-02-13 16:40:13 -08:00
George Amanakis 34ce4c42ff
Fix a race condition in dsl_dataset_sync() when activating features
The zio returned from arc_write() in dmu_objset_sync() uses
zio_nowait(). However we may reach the end of dsl_dataset_sync()
which checks if we need to activate features in the filesystem
without knowing if that zio has even run through the ZIO pipeline yet.
In that case we will flag features to be activated in
dsl_dataset_block_born() but dsl_dataset_sync() has already
completed its run and those features will not actually be activated.
Mitigate this by moving the feature activation code in
dsl_dataset_sync_done(). Also add new ASSERTs in
dsl_scan_visitbp() checking if a block contradicts any filesystem
flags.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #13816
2023-02-13 16:37:46 -08:00
Prakash Surya 13312e2fa1
Reduce need for contiguous memory for ioctls
We've had cases where we trigger an OOM despite having memory freely
available on the system. For example, here, we had about 21GB free:

    kernel: Node 0 Normal: 2418758*4kB (UME) 1549533*8kB (UE) 0*16kB
    0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB =
    22071296kB

The problem being, all the memory is in 4K and 8K contiguous regions,
but the allocation request was for a 16K contiguous region:

    kernel: SafeExecutors-4 invoked oom-killer:
    gfp_mask=0x42dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_COMP|__GFP_ZERO),
    order=2, oom_score_adj=0

The offending allocation came from this call trace:

    kernel: Call Trace:
    kernel:  dump_stack+0x57/0x7a
    kernel:  dump_header+0x4f/0x1e1
    kernel:  oom_kill_process.cold.33+0xb/0x10
    kernel:  out_of_memory+0x1ad/0x490
    kernel:  __alloc_pages_slowpath+0xd55/0xe40
    kernel:  __alloc_pages_nodemask+0x2df/0x330
    kernel:  kmalloc_large_node+0x42/0x90
    kernel:  __kmalloc_node+0x25a/0x320
    kernel:  ? spl_kmem_free_impl+0x21/0x30 [spl]
    kernel:  spl_kmem_alloc_impl+0xa5/0x100 [spl]
    kernel:  spl_kmem_zalloc+0x19/0x20 [spl]
    kernel:  zfsdev_ioctl+0x2b/0xe0 [zfs]
    kernel:  do_vfs_ioctl+0xa9/0x640
    kernel:  ? __audit_syscall_entry+0xdd/0x130
    kernel:  ksys_ioctl+0x67/0x90
    kernel:  __x64_sys_ioctl+0x1a/0x20
    kernel:  do_syscall_64+0x5e/0x200
    kernel:  entry_SYSCALL_64_after_hwframe+0x44/0xa9
    kernel: RIP: 0033:0x7fdca3674317

The problem is, for each ioctl that ZFS makes, it has to allocate a
zfs_cmd_t structure, which is 13744 bytes in size (on my system):

    sdb> sizeof zfs_cmd
    (size_t)13744

This size, coupled with the fact that we currently allocate it with
kmem_zalloc, means we need a 16K contiguous region of memory to satisfy
the request.

The solution taken by this change, is to use "vmem" instead of "kmem" to
do the allocation, such that we don't necessarily need a contiguous 16K
memory region to satisfy the allocation.

Arguably, a better solution would be not to require such a large
allocation to begin with (e.g. reduce the size of the zfs_cmd_t
structure), but that'd be a much larger change than this "one liner".
Thus, I've opted for this approach for now; we can always circle back
and attempt to reduce the size of the structure in the future.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes #14474
2023-02-13 16:35:59 -08:00
Alexander Motin 87a4dfa561
Improve arc_read() error reporting
Debugging reported NULL de-reference panic in dnode_hold_impl() I found
that for certain types of errors arc_read() may only return error code,
but not properly report it via done and pio arguments.  Lack of done
calls may result in reference and/or memory leaks in higher level code.
Lack of error reporting via pio may result in unnoticed errors there.
For example, dbuf_read(), where dbuf_read_impl() ignores arc_read()
return, relies completely on the pio mechanism and missed the errors.

This patch makes arc_read() to always call done callback and always
propagate errors to parent zio, if either is provided.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14454
2023-02-13 13:21:53 -08:00
Richard Yao 66953686c0 Add assertion and make variables unsigned in abd_alloc_chunks()
Clang's static analyzer pointed out that if alloc_pages >= nr_pages
before the loop, the value of page will be undefined and will be used
anyway. This should not be possible, but as cleanup, we add an
assertion. We also recognize that the local variables should be unsigned
in the first place, so we make them unsigned. This is not enough to
avoid the need for the assertion, since there is still the case that
alloc_pages == nr_pages and nr_pages == 0, which the assertion
implicitly checks.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14456
2023-02-06 11:10:50 -08:00
Richard Yao cfb49616cd Cleanup: spa vdev processing should check NULL pointers
The PVS Studio 2016 FreeBSD kernel report stated:

\contrib\opensolaris\uts\common\fs\zfs\spa.c (1341): error V595: The 'spa->spa_spares.sav_vdevs' pointer was utilized before it was verified against nullptr. Check lines: 1341, 1342.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\spa.c (1355): error V595: The 'spa->spa_l2cache.sav_vdevs' pointer was utilized before it was verified against nullptr. Check lines: 1355, 1357.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\spa.c (1398): error V595: The 'spa->spa_spares.sav_vdevs' pointer was utilized before it was verified against nullptr. Check lines: 1398, 1408.
\sys\cddl\contrib\opensolaris\uts\common\fs\zfs\spa.c (1583): error V595: The 'oldvdevs' pointer was utilized before it was verified against nullptr. Check lines: 1583, 1595.

In practice, all of these uses were safe because a NULL pointer
implied a 0 vdev count, which kept us from iterating over vdevs.
However, rearranging the code to check the pointer first is not a
terrible micro-optimization and makes it more readable, so let us
do that.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14456
2023-02-06 11:09:28 -08:00
Richard Yao 3a7d2a0ce0 zfs_get_temporary_prop() should not pass NULL to strcpy()
`dsl_dir_activity_in_progress()` can call `zfs_get_temporary_prop()` with
the forth value set to NULL, which will pass NULL to `strcpy()` when
there is a match

Clang's static analyzer caught this with the help of CodeChecker for
Cross Translation Unit analysis.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes #14456
2023-02-06 11:08:57 -08:00
Matthew Ahrens 14872aaa4f
EIO caused by encryption + recursive gang
Encrypted blocks can not have 3 DVAs, because they use the space of the
3rd DVA for the IV+salt.  zio_write_gang_block() takes this into
account, setting `gbh_copies` to no more than 2 in this case.  Gang
members BP's do not have the X (encrypted) bit set (nor do they have the
DMU level and type fields set), because encryption is not handled at
this level.  The gang block is reassembled, and then encryption (and
compression) are handled.

To check if this gang block is encrypted, the code in
zio_write_gang_block() checks `pio->io_bp`.  This is normally fine,
because the block that's being ganged is typically the encrypted BP.

The problem is that if there is "recursive ganging", where a gang member
is itself a gang block, then when zio_write_gang_block() is called to
create a gang block for a gang member, `pio->io_bp` is the gang member's
BP, which doesn't have the X bit set, so the number of DVA's is not
restricted to 2.  It should instead be looking at the the "gang leader",
i.e. the top-level gang block, to determine how many DVA's can be used,
to avoid a "NDVA's inversion" (where a child has more DVA's than its
parent).

gang leader BP: X (encrypted) bit set, 2 DVA's, IV+salt in 3rd DVA's
space:
```
DVA[0]=<1:...:100400> DVA[1]=<0:...:100400> salt=... iv=...
[L0 ZFS plain file] fletcher4 uncompressed encrypted LE
gang unique double size=100000L/100000P birth=... fill=1 cksum=...
```

leader's GBH contains a BP with gang bit set and 3 DVA's:
```
DVA[0]=<1:...:55600> DVA[1]=<0:...:55600>
[L0 unallocated] fletcher4 uncompressed unencrypted LE
contiguous unique double size=55600L/55600P birth=... fill=0 cksum=...

DVA[0]=<1:...:55600> DVA[1]=<0:...:55600>
[L0 unallocated] fletcher4 uncompressed unencrypted LE
contiguous unique double size=55600L/55600P birth=... fill=0 cksum=...

DVA[0]=<1:...:55600> DVA[1]=<0:...:55600> DVA[2]=<1:...:200>
[L0 unallocated] fletcher4 uncompressed unencrypted LE
gang unique double size=55400L/55400P birth=... fill=0 cksum=...
```

On nondebug bits, having the 3rd DVA in the gang block works for the
most part, because it's true that all 3 DVA's are available in the gang
member BP (in the GBH).  However, for accounting purposes, gang block
DVA's ASIZE include all the space allocated below them, i.e. the
512-byte gang block header (GBH) as well as the gang members below that.
We see that above where the gang leader BP is 1MB logical (and after
compression: 0x`100000P`), but the ASIZE of each DVA is 2 sectors (1KB)
more than 1MB (0x`100400`).

Since thre are 3 copies of a block below it, we increment the ATIME of
the 3rd DVA of the gang leader by the space used by the 3rd DVA of the
child (1 sector, in this case).  But there isn't really a 3rd DVA of the
parent; the salt is stored in place of the 3rd DVA's ASIZE.

So when zio_write_gang_member_ready() increments the parent's BP's
`DVA[2]`'s ASIZE, it's actually incrementing the parent's salt.  When we
later try to read the encrypted recursively-ganged block, the salt
doesn't match what we used to write it, so MAC verification fails and we
get an EIO.

```
zio_encrypt():  encrypted 515/2/0/403 salt: 25 25 bb 9d ad d6 cd 89
zio_decrypt(): decrypting 515/2/0/403 salt: 26 25 bb 9d ad d6 cd 89
```

This commit addresses the problem by not increasing the number of copies
of the GBH beyond 2 (even for non-encrypted blocks).  This simplifies
the logic while maintaining the ability to traverse all metadata
(including gang blocks) even if one copy is lost.  (Note that 3 copies
of the GBH will still be created if requested, e.g. for `copies=3` or
MOS blocks.)  Additionally, the code that increments the parent's DVA's
ASIZE is made to check the parent DVA's NDVAS even on nondebug bits.  So
if there's a similar bug in the future, it will cause a panic when
trying to write, rather than corrupting the parent BP and causing an
error when reading.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Caused-by: #14356
Closes #14440
Closes #14413
2023-02-06 09:37:06 -08:00
Jorgen Lundman dffd40b3b6
Unify assembly files with macOS
The remaining changes needed to make the assembly files work
with macOS.

Reviewed-by: Attila Fülöp <attila@fueloep.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #14451
2023-02-06 09:27:55 -08:00
Allan Jude c799866b97
Resolve WS-2021-0184 vulnerability in zstd
Pull in d40f55cd950919d7eac951b122668e55e33e5202 from upstream

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #14439
2023-02-02 15:12:51 -08:00
Brian Behlendorf 973934b965 Increase default zfs_rebuild_vdev_limit to 64MB
When testing distributed rebuild performance with more capable
hardware it was observed than increasing the zfs_rebuild_vdev_limit
to 64M reduced the rebuild time by 17%.  Beyond 64MB there was
some improvement (~2%) but it was not significant when weighed
against the increased memory usage. Memory usage is capped at 1/4
of arc_c_max.

Additionally, vr_bytes_inflight_max has been moved so it's updated
per-metaslab to allow the size to be adjust while a rebuild is
running.

Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14428
2023-01-27 10:02:24 -08:00
Brian Behlendorf c0aea7cf4e Increase default zfs_scan_vdev_limit to 16MB
For HDD based pools the default zfs_scan_vdev_limit of 4M
per-vdev can significantly limit the maximum scrub performance.
Increasing the default to 16M can double the scrub speed from
80 MB/s per disk to 160 MB/s per disk.

This does increase the memory footprint during scrub/resilver
but given the performance win this is a reasonable trade off.
Memory usage is capped at 1/4 of arc_c_max.  Note that number
of outstanding I/Os has not changed and is still limited by
zfs_vdev_scrub_max_active.

Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14428
2023-01-27 10:01:13 -08:00
Alexander Motin dc5c8006f6
Prefetch on deadlists merge
During snapshot deletion ZFS may issue several reads for each deadlist
to merge them into next snapshot's or pool's bpobj.  Number of the dead
lists increases with number of snapshots.  On HDD pools it may take
significant time during which sync thread is blocked.

This patch introduces prescient prefetch of required blocks for up to
128 deadlists ahead.  Tests show reduction of time required to delete
dataset with 720 snapshots with randomly overwritten file on wide HDD
pool from 75-85 to 22-28 seconds.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Issue #14276 
Closes #14402
2023-01-25 11:30:24 -08:00
Brian Behlendorf c85ac731a0
Improve resilver ETAs
When resilvering the estimated time remaining is calculated using
the average issue rate over the current pass.  Where the current
pass starts when a scan was started, or restarted, if the pool
was exported/imported.

For dRAID pools in particular this can result in wildly optimistic
estimates since the issue rate will be very high while scanning
when non-degraded regions of the pool are scanned.  Once repair
I/O starts being issued performance drops to a realistic number
but the estimated performance is still significantly skewed.

To address this we redefine a pass such that it starts after a
scanning phase completes so the issue rate is more reflective of
recent performance.  Additionally, the zfs_scan_report_txgs
module option can be set to reset the pass statistics more often.

Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #14410
2023-01-25 11:28:54 -08:00