Page writebacks with WB_SYNC_NONE can take several seconds to complete
since they wait for the transaction group to close before being
committed. This is usually not a problem since the caller does not
need to wait. However, if we're simultaneously doing a writeback
with WB_SYNC_ALL (e.g via msync), the latter can block for several
seconds (up to zfs_txg_timeout) due to the active WB_SYNC_NONE
writeback since it needs to wait for the transaction to complete
and the PG_writeback bit to be cleared.
This commit deals with 2 cases:
- No page writeback is active. A WB_SYNC_ALL page writeback starts
and even completes. But when it's about to check if the PG_writeback
bit has been cleared, another writeback with WB_SYNC_NONE starts.
The sync page writeback ends up waiting for the non-sync page
writeback to complete.
- A page writeback with WB_SYNC_NONE is already active when a
WB_SYNC_ALL writeback starts. The WB_SYNC_ALL writeback ends up
waiting for the WB_SYNC_NONE writeback.
The fix works by carefully keeping track of active sync/non-sync
writebacks and committing when beneficial.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Shaan Nobee <sniper111@gmail.com>
Closes#12662Closes#12790
CLOCK_MONOTONIC_RAW is only a thing on Linux and macOS. I'm not
actually sure why the previous hardcoding of a constant didn't
error out, but when we removed it, it sure does now.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12995
When the special_small_blocks property is being set during a pool
create it enforces a limit of 128KiB even if the pool's record size
is larger.
If the recordsize property is being set during a pool create, then
use that value instead of the default SPA_OLD_MAXBLOCKSIZE value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <dev.fs.zfs@gmail.com>
Closes#13815Closes#14811
The zpool_resilver_concurrent test case requires the ZED which is not used
on FreeBSD. Add this test to the known list of skipped tested for FreeBSD.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14904
The auto_replace_001_pos test case does not reliably pass on
Fedora 37 and newer. Until the test case can be updated to make
it reliable add it to the list of "maybe" exceptions on Linux.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #14851Closes#14852
Update several flaky test cases in zts-report.py.in until they
can be made entirely reliable.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#14392
Add snapshot_002_pos to the known list of occasional failures
for FreeBSD until it can be made entirely reliable.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #14831Closes#14832
We use block_device_wait to wait for the zvol block device to
actually appear, and we log the result of the dd calls by using
an intermediate file.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#14767
zpool initialize functions well for touching every free byte...once.
But if we want to do it again, we're currently out of luck.
So let's add zpool initialize -u to clear it.
Co-authored-by: Rich Ercolani <rincebrain@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12451Closes#14873
For draid vdevs it was possible to initiate both the
sequential and healing resilver at same time.
This fixes the following two scenarios.
1) There's a window where a sequential rebuild can
be started via ZED even if a healing resilver has been
scheduled.
- This is fixed by adding additional check in
spa_vdev_attach() for any scheduled resilver and return
appropriate error code when a resilver is already in
progress.
2) It was possible for zpool clear to start a healing
resilver when it wasn't needed at all. This occurs because
during a vdev_open() the device is presumed to be healthy not
until the device is validated by vdev_validate() and it's set
unavailable. However, by this point an async resilver will
have already been requested if the DTL isn't empty.
- This is fixed by cancelling the SPA_ASYNC_RESILVER
request immediately at the end of vdev_reopen() when a resilver
is unneeded.
Finally, added a testcase in ZTS for verification.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes#14881Closes#14892
If we receive a DRR_FREEOBJECTS as the first entry in an object range,
this might end up producing a hole if the freed objects were the
only existing objects in the block.
If the txg starts syncing before we've processed any following
DRR_OBJECT records, this leads to a possible race where the backing
arc_buf_t gets its psize set to 0 in the arc_write_ready() callback
while still being referenced from a dirty record in the open txg.
To prevent this, we insert a txg_wait_synced call if the first
record in the range was a DRR_FREEOBJECTS that actually
resulted in one or more freed objects.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: David Hedberg <david.hedberg@findity.com>
Sponsored by: Findity AB
Closes#11893Closes#14358
spa_import() relies on a pool config fetched by spa_try_import() for
spare/cache devices. Import flags are not passed to spa_tryimport(),
which makes it return early due to a missing log device and missing
retrieving the cache device and spare eventually. Passing
ZFS_IMPORT_MISSING_LOG to spa_tryimport() makes it fetch the correct
configuration regardless of the missing log device.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14794
When a page is faulted in for memory mapped I/O the page lock
may be dropped before it has been read and marked up to date.
If a buffered read encounters such a page in mappedread() it
must wait until the page has been updated. Failure to do so
will result in a panic on debug builds and incorrect data on
production builds.
The critical part of this change is in mappedread() where pages
which are not up to date are now handled. Additionally, it
includes the following simplifications.
- zfs_getpage() and zfs_fillpage() could be passed an array of
pages. This could be more efficient if it was used but in
practice only a single page was ever provided. These
interfaces were simplified to acknowledge that.
- update_pages() was modified to correctly set the PG_error bit
on a page when it cannot be read by dmu_read().
- Setting PG_error and PG_uptodate was moved to zfs_fillpage()
from zpl_readpage_common(). This is consistent with the
handling in update_pages() and mappedread().
- Minor additional refactoring to comments and variable
declarations to improve readability.
- Add a test case to exercise concurrent buffered, direct,
and mmap IO to the same file.
- Reduce the mmap_sync test case default run time.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13608Closes#14498
Deprecation of Python versions below 3.6 gives opportunity to unify the
build and install requirements for OpenZFS packages. The minimal
supported Python version is 3.6 as this is the most recent Python
package CentOS/RHEL 7 users can get.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes#12925
Add a -K option to the test suite to log each test name to /dev/kmsg
(on Linux), so if there's a kernel warning we'll be able to match
it up to a particular test.
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #13227
- Kmemleak `clear` is invoked right before every test case run.
- Kmemleak `scan` is requested right after each test case is finished.
- Kmemleak instrumentation is not used for
setup/cleanup/pretest/posttest/failsafe stages to shorten the test
case execution time.
- Kmemleak periodic scan is disabled (`scan=0`) before the test suite
run to avoid interfering with the on-demand scan results.
- There are unavoidable potential false positives coming from kernel
areas other than OpenZFS module.
- The ZTS with kmemleak enabled duration is increased by ~50%.
Example run
```
Running Time: 07:12:13
Percent passed: 98.3%
unreferenced object 0xffff9da82aea5410 (size 80):
comm "kworker/u32:10", pid 942206, jiffies 4296749716 (age 2615.516s)
hex dump (first 32 bytes):
00 30 30 00 00 00 00 00 ff 8f 30 00 00 00 00 00 .00.......0.....
51 e6 77 05 a8 9d ff ff 00 00 00 00 00 00 00 00 Q.w.............
backtrace:
[<000000005cf1fea2>] alloc_extent_state+0x1d/0xb0 [btrfs]
[<0000000083f78ae5>] set_extent_bit+0x2ff/0x670 [btrfs]
[<00000000de29249e>] lock_extent_bits+0x6b/0xa0 [btrfs]
[<00000000b241f424>] lock_and_cleanup_extent_if_need+0xaf/0x1c0
[btrfs]
[<0000000093ca72b5>] btrfs_buffered_write+0x297/0x7d0 [btrfs]
[<000000002c2938c8>] btrfs_file_write_iter+0x127/0x390 [btrfs]
[<00000000b888f720>] do_iter_readv_writev+0x152/0x1b0
[<00000000320f0bcc>] do_iter_write+0x7c/0x1c0
[<000000000b5a8fe0>] lo_write_bvec+0x62/0x150 [loop]
[<000000009aa03c73>] loop_process_work+0x250/0xbd0 [loop]
[<00000000c7487d8a>] process_one_work+0x1f1/0x390
[<000000000b236831>] worker_thread+0x53/0x3e0
[<0000000023cb3e57>] kthread+0x127/0x150
[<000000002d48676a>] ret_from_fork+0x22/0x30
```
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: szubersk <szuberskidamian@gmail.com>
Closes#13084
This allows parsing of zfs send progress by checking the process
title.
Doing so requires some changes to the send code in libzfs_sendrecv.c;
primarily these changes move some of the accounting around, to allow
for the code to be verbose as normal, or set the process title. Unlike
BSD, setproctitle() isn't standard in Linux; thus, borrowed it from
libbsd with slight modifications.
Authored-by: Sean Eric Fagan <sef@FreeBSD.org>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14376
ZED does not take any action for disk removal events if there is no
spare VDEV available. Added zpool_vdev_remove_wanted() in libzfs
and vdev_remove_wanted() in vdev.c to remove the VDEV through ZED
on removal event. This means that if you are running zed and
remove a disk, it will be propertly marked as REMOVED.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Update the GitHub actions workflows using a subset of the changes
from the master branch, commit 620a977f22. Cherry-picking each
relevant commit would have resulted in a large number of conflicts
so this change only applies a minimal set of useful updates.
- Added build-dependencies.txt and checkstyle-dependencies.txt
- Added reclaim_disk_space.sh script
- Minor changes to build steps
- Reduced ztest run time
- checkbashisms, mandoc, and cppcheck were not included to
avoid additional backports
- Add exceptions for shellcheck
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When activating filesystem features after receiving a snapshot, do
so only in syncing context.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#14304Closes#14252
commit a7304ab9c1 upstream
mmapwrite is used during the ZTS to identify issues with mmap-ed files.
This helper program exercises this pathway by continuously writing to a
file. ee6bf97c7 modified the writing threads to terminate after a set
amount of total data is written. This change allows standard program
execution to reach the end of a writer thread without closing the file
descriptor, introducing a resource "leak."
This patch appeases resource leak analyses by close()-ing the file at
the end of the thread.
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes#14353
commit ee6bf97c77 upstream
mmapwrite spawns several threads, all of which perform writes on a file
for the purpose of testing the behavior of mmap(2)-ed files. One
thread performs an mmap and a write to the beginning of that region,
while the others perform regular writes after lseek(2)-ing the end of
the file.
Because these regular writes are set in a while (1) loop, they will
write an unbounded amount of data to disk. The mmap_write_001_pos test
script SIGKILLs them after 30 seconds, but on fast testbeds, this may
be enough time to exhaust the available space in the filesystem,
leading to spurious test failures.
Instead, limit the total file size by checking that the lseek return
value is no greater than 250 * 1024*1024 bytes, which is less than the
default minimum vdev size defined in includes/default.cfg .
This also includes part of 2a493a4c71,
which checks the return value of lseek.
Signed-off-by: Antonio Russo <aerusso@aerusso.net>
Closes#14277Closes#14345
zfs_zaccess_trivial() calls the generic_permission() to read
xattr attributes. This causes deadlock if called from
zpl_xattr_set_dir() context as xattr and the dent locks are
already held in this scenario. This commit skips the permissions
checks for extended attributes since the Linux VFS stack already
checks it before passing us the control.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Currently, the receiver fails to override the encryption
property for the plain replicated dataset with the error:
"cannot receive incremental stream: encryption property
'encryption' cannot be set for incremental streams.". The
problem is resolved by allowing the receiver to override
the encryption property for plain replicated send.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
We are not allowed to dirty a filesystem when done receiving
a snapshot. In this case the flag SPA_FEATURE_LARGE_BLOCKS will
not be set on that filesystem since the filesystem is not on
dp_dirty_datasets, and a subsequent encrypted raw send will fail.
Fix this by checking in dsl_dataset_snapshot_sync_impl() if the feature
needs to be activated and do so if appropriate.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#13699Closes#13782
Found with -Wunused-but-set-variable on Clang trunk
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes#13304
In #13709, as in #11294 before it, it turns out that 63a26454 still had
the same failure mode as when it was first landed as d1d47691, and
fails to unlock certain datasets that formerly worked.
Rather than reverting it again, let's add handling to just throw out
the accounting metadata that failed to unlock when that happens, as
well as a test with a pre-broken pool image to ensure that we never get
bitten by this again.
Fixes: #13709
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Special vdevs should not be replaced by a hot spare.
Log vdevs already support this, extending the
functionality for special vdevs.
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#14129
Commit 68ddc06b61 introduced support
for receiving unencrypted datasets as children of encrypted ones but
unfortunately got the logic upside down. This resulted in failing to
deny receives of incremental sends into encrypted datasets without
their keys loaded. If receiving a filesystem, the receive was done
into a newly created unencrypted child dataset of the target. In
case of volumes the receive made the target volume undeletable since
a dataset was created below it, which we obviously can't handle.
Incremental streams with embedded blocks are affected as well.
We fix the broken logic to properly deny receives in such cases.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#13598Closes#14055Closes#14119
Currently, additional/extra copies are created for metadata in
addition to the redundancy provided by the pool(mirror/raidz/draid),
due to this 2 times more space is utilized per inode and this decreases
the total number of inodes that can be created in the filesystem. By
setting redundant_metadata to none, no additional copies of metadata
are created, hence can reduce the space consumed by the additional
metadata copies and increase the total number of inodes that can be
created in the filesystem. Additionally, this can improve file create
performance due to the reduced amount of metadata which needs
to be written.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes#13680
For encrypted raw receive, objset creation is delayed until a call to
dmu_recv_stream(). ZFS_PROP_SHARESMB property requires objset to be
populated when calling zpl_earlier_version(). To correctly handle the
ZFS_PROP_SHARESMB property for encrypted raw receive, this change
delays setting the property.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#13878
When iterating through children physical ashifts for vdev, prefer
ones above the maximum logical ashift, that we can actually use,
but within the administrator defined maximum.
When selecting top-level vdev ashift, do not set it to the defined
maximum in case physical ashift is even higher, but just ignore one.
Using the maximum does not prevent misaligned writes, but reduces
space efficiency. Since ZFS tries to write data sequentially and
aggregates the writes, in many cases large misanigned writes may be
not as bad as the space penalty otherwise.
Allow internal physical ashifts for vdevs higher than SHIFT_MAX.
May be one day allocator or aggregation could benefit from that.
Reduce zfs_vdev_max_auto_ashift default from 16 (64KB) to 14 (16KB),
so that ZFS may still use bigger ashifts up to SHIFT_MAX (64KB),
but only if it really has to or explicitly told to, but not as an
"optimization".
There are some read-intensive NVMe SSDs that report Preferred Write
Alignment of 64KB, and attempt to build RAIDZ2 of those leads to a
space inefficiency that can't be justified. Instead these changes
make ZFS fall back to logical ashift of 12 (4KB) by default and
only warn user that it may be suboptimal for performance.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#13798
Add physical device size/capacity only for physical devices in
'zpool list -v' instead of displaying "-" in the SIZE column.
This would make it easier to see the individual device capacity and
to determine which spares are large enough to replace which devices.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Dipak Ghosh <dipak.ghosh@hpe.com>
Signed-off-by: Akash B <akash-b@hpe.com>
Closes#12561Closes#13106
`zpool_expand_001_pos` was often failing due to not seeing autoexpand
commands in the `zpool history`. During testing, I found this to be
unreliable (sometimes the "online" wouldn't appear in `zpool history`)
and unnecessary, as we could simply check that the pool increased in
size.
This commit revamps the test to check for the expanded pool size
and corresponding new free space.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#13743
zdb -d <pool>/<objset ID> does not work when
other command line arguments are included i.e.
zdb -U <cachefile> -d <pool>/<objset ID>
This change fixes the command line parsing
to handle this situation. Also fix issue
where zdb -r <dataset> <file> does not handle
the root <dataset> of the pool. Introduce -N
option to force <objset ID> to be interpreted
as a numeric objsetID.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes#12845Closes#12944
Not all Linux distribution kernels enable io_uring support by
default. Update the run time check to verify that the booted
kernel was built with CONFIG_IO_URING=y.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Co-authored-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13648Closes#13685
When scrubbing a raidz/draid pool, which contains a replacing or
sparing mirror with multiple online children, only one child will
be read. This is not normally a serious concern because the DTL
records are used to determine where a good copy of the data is.
As long as the data can be read from one child the mirror vdev
will use it to repair gaps in any of its children. Furthermore,
even if the data which was read is corrupt the raidz code will
detect this and issue its own repair I/O to correct the damage
in the mirror vdev.
However, in the scenario where the DTL is wrong due to silent
data corruption (say due to overwriting one child) and the scrub
happens to read from a child with good data, then the other damaged
mirror child will not be detected nor repaired.
While this is possible for both raidz and draid vdevs, it's most
pronounced when using draid. This is because by default the zed
will sequentially rebuild a draid pool to a distributed spare,
and the distributed spare half of the mirror is always preferred
since it delivers better performance. This means the damaged
half of the mirror will go undetected even after scrubbing.
For system administrations this behavior is non-intuitive and in
a worst case scenario could result in the only good copy of the
data being unknowingly detached from the mirror.
This change resolves the issue by reading all replacing/sparing
mirror children when scrubbing. When the BP isn't available for
verification, then compare the data buffers from each child. They
must all be identical, if not there's silent damage and an error
is returned to prompt the top-level vdev to issue a repair I/O to
rewrite the data on all of the mirror children. Since we can't
tell which child was wrong a checksum error is logged against the
replacing or sparing mirror vdev.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13555
It turns out, no, in fact, ZERO_RANGE and PUNCH_HOLE do
have differing semantics in some ways - in particular,
one requires KEEP_SIZE, and the other does not.
Also added a zero-range test to catch this, corrected a flaw
that made the punch-hole test succeed vacuously, and a typo
in file_write.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#13329Closes#13338
When unlinking multiple files from a pool at 100% capacity, it was
possible for ENOSPC to be returned after the first unlink. e.g.
rm -f /mnt/fs/test1.0.0 /mnt/fs/test1.1.0 /mnt/fs/test1.2.0
rm: cannot remove '/mnt/fs/test1.1.0': No space left on device
rm: cannot remove '/mnt/fs/test1.2.0': No space left on device
After waiting for the pending deferred frees from the first unlink to
be processed the remaining files can then be unlinked. This is caused
by the quota limit in dsl_dir_tempreserve_impl() being temporarily
decreased to the allocatable pool capacity less any deferred free
space.
This is resolved using the existing mechanism of returning ERESTART
when over quota as long as we know enough space will shortly be
available after processing the pending deferred frees.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13172
In the CI environment it's possible for events to be slightly
delayed resulting in 4, instead of 5, events appearing in the
log file. This isn't a problem and should be considered a
success to avoid false positive test results.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12625
Related to commit 90b77a036. Retry the `zpool export` if the pool
is "busy" indicating there is a process accessing the mount point.
This can happen after an import, allowing it to be retried will
avoid spurious test failures.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13169
As explained by the disclaimer in the test case,
"This test can fail since nothing guarantees that old
MOS blocks aren't overwritten."
This behavior is expected and correct, but results in a
flaky test case which is problematic for the CI. The best
we can do to resolve this is to retry the sub-test which
failed when the MOS blocks have clearly been overwritten.
When testing failures were rare enough that a single retry
should normally be sufficient. However, we allow up to
five for good measure.
Reviewed by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13119
As previously noted in #12272 the receive-o-x_props_override.ksh test
reliably fails on FreeBSD. Since we don't expect this test to pass
move the exception from the "maybe" to "known" section. This way we
don't retry the FAILED test when it is not expected to pass.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#13167
Shaan Nobee
Brian Behlendorf
наб
Don Brady
Paul Dagnelie
Akash B
David Hedberg
Ameer Hamza
Damian Szuberski
Tony Hutter
George Amanakis
Antonio Russo
Rich Ercolani
Ameer Hamza
Attila Fülöp
Alexander Motin
Paul Zuchowski