Previously Solaris style atomic primitives were implemented simply by
wrapping the desired operation in a global spinlock. This was easy to
implement at the time when I wasn't 100% sure I could safely layer the
Solaris atomic primatives on the Linux counterparts. It however was
likely not good for performance.
After more investigation however it does appear the Solaris primitives
can be layered on Linux's fairly safely. The Linux atomic_t type really
just wraps a long so we can simply cast the Solaris unsigned value to
either a atomic_t or atomic64_t. The only lingering problem for both
implementations is that Solaris provides no atomic read function. This
means reading a 64-bit value on a 32-bit arch can (and will) result in
word breaking. I was very concerned about this initially, but upon
further reflection it is a limitation of the Solaris API. So really
we are just being bug-for-bug compatible here.
With this change the default implementation is layered on top of Linux
atomic types. However, because we're assuming a lot about the internal
implementation of those types I've made it easy to fall-back to the
generic approach. Simply build with --enable-atomic_spinlocks if
issues are encountered with the new implementation.
The cmn_err/vcmn_err functions are layered on top of the debug
system which usually expects a newline at the end. However, there
really doesn't need to be a newline there and there in fact should
not be for the CE_CONT case so let's just drop the warning.
Also we make a half-hearted attempt to handle a leading ! which
means only send it to the syslog not the console. In this case
we just send to the the debug logs and not the console.
This macro was removed from the default RPM macro file. Interestly,
some of the arch specific macro's add it back it based on your distro
but it should not be counted on. However, __id still exists and its
command line args have historically been fairly stable so we will
directly use %{__id} -un to get the user name.
As of 2.6.25 kobj->k_name was replaced with kobj->name. Some distros
such as RHEL5 (2.6.18) add a patch to prevent this from being a problem
but other older distros such as SLES10 (2.6.16) have not. To avoid
the whole issue I'm updating the code to use kobject_set_name() which
does what I want and has existed all the way back to 2.6.11.
Ricardo has pointed out that under Solaris the cwd is set to '/'
during module load, while under Linux it is set to the callers cwd.
To handle this cleanly I've reworked the module *_init()/_exit()
macros so they call a *_setup()/_cleanup() function when any SPL
dependent module is loaded or unloaded. This gives us a chance to
perform any needed modification of the process, in this case changing
the cwd. It also handily provides a way to avoid creating wrapper
init()/exit() functions because the Solaris and Linux prototypes
differ slightly. All dependent modules should now call the spl
helper macros spl_module_{init,exit}() instead of the native linux
versions.
Unfortunately, it appears that under Linux there has been no consistent
API in the kernel to set the cwd in a module. Because of this I have
had to add more autoconf magic than I'd like. However, what I have
done is correct and has been tested on RHEL5, SLES11, FC11, and CHAOS
kernels.
In addition, I have change the rootdir type from a 'void *' to the
correct 'vnode_t *' type. And I've set rootdir to a non-NULL value.
We need to directly call __init_rwsem() or the name gets expanded
to SEM(lock-name). This is safe and correct for the support arches
x86/x86_64/ppc/ppc64.
For a generic explanation of why mutexs needed to be reimplemented
to work with the kernel lock profiling see commits:
e811949a57 and
d28db80fd0
The specific changes made to the mutex implemetation are as follows.
The Linux mutex structure is now directly embedded in the kmutex_t.
This allows a kmutex_t to be directly case to a mutex struct and
passed directly to the Linux primative.
Just like with the rwlocks it is critical that these functions be
implemented as '#defines to ensure the location information is
preserved. The preprocessor can then do a direct replacement of
the Solaris primative with the linux primative.
Just as with the rwlocks we need to track the lock owner. Here
things get a little more interesting because depending on your
kernel version, and how you've built your kernel Linux may already
do this for you. If your running a 2.6.29 or newer kernel on a
SMP system the lock owner will be tracked. This was added to Linux
to support adaptive mutexs, more on that shortly. Alternately, your
kernel might track the lock owner if you've set CONFIG_DEBUG_MUTEXES
in the kernel build. If neither of the above things is true for
your kernel the kmutex_t type will include and track the lock owner
to ensure correct behavior. This is all handled by a new autoconf
check called SPL_AC_MUTEX_OWNER.
Concerning adaptive mutexs these are a very recent development and
they did not make it in to either the latest FC11 of SLES11 kernels.
Ideally, I'd love to see this kernel change appear in one of these
distros because it does help performance. From Linux kernel commit:
0d66bf6d3514b35eb6897629059443132992dbd7
"Testing with Ingo's test-mutex application...
gave a 345% boost for VFS scalability on my testbox"
However, if you don't want to backport this change yourself you
can still simply export the task_curr() symbol. The kmutex_t
implementation will use this symbol when it's available to
provide it's own adaptive mutexs.
Finally, DEBUG_MUTEX support was removed including the proc handlers.
This was done because now that we are cleanly integrated with the
kernel profiling all this information and much much more is available
in debug kernel builds. This code was now redundant.
Update mutexs validated on:
- SLES10 (ppc64)
- SLES11 (x86_64)
- CHAOS4.2 (x86_64)
- RHEL5.3 (x86_64)
- RHEL6 (x86_64)
- FC11 (x86_64)
The behavior of RW_*_HELD was updated because it was not quite right.
It is not sufficient to return non-zero when the lock is help, we must
only do this when the current task in the holder.
This means we need to track the lock owner which is not something
tracked in a Linux semaphore. After some experimentation the
solution I settled on was to embed the Linux semaphore at the start
of a larger krwlock_t structure which includes the owner field.
This maintains good performance and allows us to cleanly intergrate
with the kernel lock analysis tools. My reasons:
1) By placing the Linux semaphore at the start of krwlock_t we can
then simply cast krwlock_t to a rw_semaphore and pass that on to
the linux kernel. This allows us to use '#defines so the preprocessor
can do direct replacement of the Solaris primative with the linux
equivilant. This is important because it then maintains the location
information for each rw_* call point.
2) Additionally, by adding the owner to krwlock_t we can keep this
needed extra information adjacent to the lock itself. This removes
the need for a fancy lookup to get the owner which is optimal for
performance. We can also leverage the existing spin lock in the
semaphore to ensure owner is updated correctly.
3) All helper functions which do not need to strictly be implemented
as a define to preserve location information can be done as a static
inline function.
4) Adding the owner to krwlock_t allows us to remove all memory
allocations done during lock initialization. This is good for all
the obvious reasons, we do give up the ability to specific the lock
name. The Linux profiling tools will stringify the lock name used
in the code via the preprocessor and use that.
Update rwlocks validated on:
- SLES10 (ppc64)
- SLES11 (x86_64)
- CHAOS4.2 (x86_64)
- RHEL5.3 (x86_64)
- RHEL6 (x86_64)
- FC11 (x86_64)
It turns out that the previous rwlock implementation worked well but
did not integrate properly with the upstream kernel lock profiling/
analysis tools. This is a major problem since it would be awfully
nice to be able to use the automatic lock checker and profiler.
The problem is that the upstream lock tools use the pre-processor
to create a lock class for each uniquely named locked. Since the
rwsem was embedded in a wrapper structure the name was always the
same. The effect was that we only ended up with one lock class for
the entire SPL which caused the lock dependency checker to flag
nearly everything as a possible deadlock.
The solution was to directly map a krwlock to a Linux rwsem using
a typedef there by eliminating the wrapper structure. This was not
done initially because the rwsem implementation is specific to the arch.
To fully implement the Solaris krwlock API using only the provided rwsem
API is not possible. It can only be done by directly accessing some of
the internal data member of the rwsem structure.
For example, the Linux API provides a different function for dropping
a reader vs writer lock. Whereas the Solaris API uses the same function
and the caller does not pass in what type of lock it is. This means to
properly drop the lock we need to determine if the lock is currently a
reader or writer lock. Then we need to call the proper Linux API function.
Unfortunately, there is no provided API for this so we must extracted this
information directly from arch specific lock implementation. This is
all do able, and what I did, but it does complicate things considerably.
The good news is that in addition to the profiling benefits of this
change. We may see performance improvements due to slightly reduced
overhead when creating rwlocks and manipulating them.
The only function I was forced to sacrafice was rw_owner() because this
information is simply not stored anywhere in the rwsem. Luckily this
appears not to be a commonly used function on Solaris, and it is my
understanding it is mainly used for debugging anyway.
In addition to the core rwlock changes, extensive updates were made to
the rwlock regression tests. Each class of test was extended to provide
more API coverage and to be more rigerous in checking for misbehavior.
This is a pretty significant change and with that in mind I have been
careful to validate it on several platforms before committing. The full
SPLAT regression test suite was run numberous times on all of the following
platforms. This includes various kernels ranging from 2.6.16 to 2.6.29.
- SLES10 (ppc64)
- SLES11 (x86_64)
- CHAOS4.2 (x86_64)
- RHEL5.3 (x86_64)
- RHEL6 (x86_64)
- FC11 (x86_64)
Supported and tested distros now include SLES10, SLES11, Chaos 4.x,
RHEL5, and Fedora 11. This update was mainly to address rebuildable
kernel module rpms, and correct rpm dependencies for each distro.
The run time stack overflow checking is being disabled by default
because it is not safe for use with 2.6.29 and latter kernels. These
kernels do now have their own stack overflow checking so this support
has become redundant anyway. It can be re-enabled for older kernels or
arches without stack overflow checking by redefining CHECK_STACK().
Basically everything we need to monitor the global memory state of
the system is now cleanly available via global_page_state(). The
problem is that this interface is still fairly recent, and there
has been one change in the page state enum which we need to handle.
These changes basically boil down to the following:
- If global_page_state() is available we should use it. Several
autoconf checks have been added to detect the correct enum names.
- If global_page_state() is not available check to see if
get_zone_counts() symbol is available and use that.
- If the get_zone_counts() symbol is not exported we have no choice
be to dynamically aquire it at load time. This is an absolute
last resort for old kernel which we don't want to patch to
cleanly export the symbol.
This interface is going away, and it's not as if most callers actually
use crhold/crfree when working with credentials. So it'll be okay
they we're not taking a reference on the task structure the odds of
it going away while working with a credential and pretty small.
The previous credential implementation simply provided the needed types and
a couple of dummy functions needed. This update correctly ties the basic
Solaris credential API in to one of two Linux kernel APIs.
Prior to 2.6.29 the linux kernel embeded all credentials in the task
structure. For these kernels, we pass around the entire task struct as if
it were the credential, then we use the helper functions to extract the
credential related bits.
As of 2.6.29 a new credential type was added which we can and do fairly
cleanly layer on top of. Once again the helper functions nicely hide
the implementation details from all callers.
Three tests were added to the splat test framework to verify basic
correctness. They should be extended as needed when need credential
functions are added.
Modern kernel build systems at least post 2.6.16 will set this properly
so we should not. In fact post 2.6.28 the include headers have moved
under arch so the guess we make here is completely wrong. Letting
the kernel build system set this ensure it will be correct.
The slab_overcommit test case could hang on a system with fragmented
memory because it was creating a kmem based slab with 256K objects.
To avoid this I've removed the KMC_KMEM flag which allows the slab
to decide if it should be kmem or vmem backed based on the object
side. The slab_lock test shares this code and will also be effected.
But the point of these two tests is to stress cache locking and
memory overcommit, the type of slab is not critical. In fact, allowing
the slab to do the default smart thing is preferable.
Simply pass the ioctl on to the normal handler. If the ioctl
helper macros are used correctly this should be safe as they
will handle the packing/unpacking of the data encoded in the
ioctl command. And actually, if the caller does not use the
IO* macros at all, and just passes small values, it will probably
be OK as well. We only get in to trouble if they try and use
the upper 32-bits. Endianness is not really a concern here, we
we are pretty much assumed they user and kernel will match.
used to scale the number of threads based on the number of online
CPUs. As CPUs are added/removed we should rescale the thread
count appropriately, but currently this is only done at create.
rpms. These should not be fatal because we actually don't need them
until we build the source rpm. When doing mock builds this is
important because these dependent rpms will only be installed if
they are specificed in the source rpms spec file.
- Kernel modules should be built using the LINUX_OBJ Makefiles and
not the LINUX Makefiles to ensure the proper install paths are used.
- Install modules in to addon/spl/
- Ensure no additional kernel module build products are packaged.
- Simplified spl.spec.in which supports RHEL, CHAOS, SLES, FEDORA.
- Allow checking for exported symbols in both Module.symvers
and Module.symvers. My stock SLES kernel ships an objects
directory with Module.symvers, yet produces a Module.symvers
in the local build directory.
Brian Behlendorf
Ricardo M. Correia