diff --git a/cmd/ztest.c b/cmd/ztest.c index b6b99bfff6..398c519cfc 100644 --- a/cmd/ztest.c +++ b/cmd/ztest.c @@ -2412,7 +2412,6 @@ ztest_get_data(void *arg, uint64_t arg2, lr_write_t *lr, char *buf, int error; ASSERT3P(lwb, !=, NULL); - ASSERT3P(zio, !=, NULL); ASSERT3U(size, !=, 0); ztest_object_lock(zd, object, RL_READER); @@ -2446,6 +2445,7 @@ ztest_get_data(void *arg, uint64_t arg2, lr_write_t *lr, char *buf, DMU_READ_NO_PREFETCH); ASSERT0(error); } else { + ASSERT3P(zio, !=, NULL); size = doi.doi_data_block_size; if (ISP2(size)) { offset = P2ALIGN(offset, size); diff --git a/include/sys/zil_impl.h b/include/sys/zil_impl.h index b58dad9695..f780ad3d61 100644 --- a/include/sys/zil_impl.h +++ b/include/sys/zil_impl.h @@ -38,14 +38,22 @@ extern "C" { /* * Possible states for a given lwb structure. * - * An lwb will start out in the "closed" state, and then transition to - * the "opened" state via a call to zil_lwb_write_open(). When - * transitioning from "closed" to "opened" the zilog's "zl_issuer_lock" - * must be held. + * An lwb will start out in the "new" state, and transition to the "opened" + * state via a call to zil_lwb_write_open() on first itx assignment. When + * transitioning from "new" to "opened" the zilog's "zl_issuer_lock" must be + * held. * - * After the lwb is "opened", it can transition into the "issued" state - * via zil_lwb_write_close(). Again, the zilog's "zl_issuer_lock" must - * be held when making this transition. + * After the lwb is "opened", it can be assigned number of itxs and transition + * into the "closed" state via zil_lwb_write_close() when full or on timeout. + * When transitioning from "opened" to "closed" the zilog's "zl_issuer_lock" + * must be held. New lwb allocation also takes "zl_lock" to protect the list. + * + * After the lwb is "closed", it can transition into the "ready" state via + * zil_lwb_write_issue(). "zl_lock" must be held when making this transition. + * Since it is done by the same thread, "zl_issuer_lock" is not needed. + * + * When lwb in "ready" state receives its block pointer, it can transition to + * "issued". "zl_lock" must be held when making this transition. * * After the lwb's write zio completes, it transitions into the "write * done" state via zil_lwb_write_done(); and then into the "flush done" @@ -62,17 +70,20 @@ extern "C" { * * Additionally, correctness when reading an lwb's state is often * achieved by exploiting the fact that these state transitions occur in - * this specific order; i.e. "closed" to "opened" to "issued" to "done". + * this specific order; i.e. "new" to "opened" to "closed" to "ready" to + * "issued" to "write_done" and finally "flush_done". * - * Thus, if an lwb is in the "closed" or "opened" state, holding the + * Thus, if an lwb is in the "new" or "opened" state, holding the * "zl_issuer_lock" will prevent a concurrent thread from transitioning - * that lwb to the "issued" state. Likewise, if an lwb is already in the - * "issued" state, holding the "zl_lock" will prevent a concurrent - * thread from transitioning that lwb to the "write done" state. + * that lwb to the "closed" state. Likewise, if an lwb is already in the + * "ready" state, holding the "zl_lock" will prevent a concurrent thread + * from transitioning that lwb to the "issued" state. */ typedef enum { - LWB_STATE_CLOSED, + LWB_STATE_NEW, LWB_STATE_OPENED, + LWB_STATE_CLOSED, + LWB_STATE_READY, LWB_STATE_ISSUED, LWB_STATE_WRITE_DONE, LWB_STATE_FLUSH_DONE, @@ -91,17 +102,21 @@ typedef enum { typedef struct lwb { zilog_t *lwb_zilog; /* back pointer to log struct */ blkptr_t lwb_blk; /* on disk address of this log blk */ + boolean_t lwb_slim; /* log block has slim format */ boolean_t lwb_slog; /* lwb_blk is on SLOG device */ - boolean_t lwb_indirect; /* do not postpone zil_lwb_commit() */ + int lwb_error; /* log block allocation error */ + int lwb_nmax; /* max bytes in the buffer */ int lwb_nused; /* # used bytes in buffer */ int lwb_nfilled; /* # filled bytes in buffer */ int lwb_sz; /* size of block and buffer */ lwb_state_t lwb_state; /* the state of this lwb */ char *lwb_buf; /* log write buffer */ + zio_t *lwb_child_zio; /* parent zio for children */ zio_t *lwb_write_zio; /* zio for the lwb buffer */ zio_t *lwb_root_zio; /* root zio for lwb write and flushes */ hrtime_t lwb_issued_timestamp; /* when was the lwb issued? */ uint64_t lwb_issued_txg; /* the txg when the write is issued */ + uint64_t lwb_alloc_txg; /* the txg when lwb_blk is allocated */ uint64_t lwb_max_txg; /* highest txg in this lwb */ list_node_t lwb_node; /* zilog->zl_lwb_list linkage */ list_node_t lwb_issue_node; /* linkage of lwbs ready for issue */ diff --git a/module/zfs/zfs_vnops.c b/module/zfs/zfs_vnops.c index fceb56dfc0..f8d13075d5 100644 --- a/module/zfs/zfs_vnops.c +++ b/module/zfs/zfs_vnops.c @@ -839,7 +839,6 @@ zfs_get_data(void *arg, uint64_t gen, lr_write_t *lr, char *buf, uint64_t zp_gen; ASSERT3P(lwb, !=, NULL); - ASSERT3P(zio, !=, NULL); ASSERT3U(size, !=, 0); /* @@ -889,6 +888,7 @@ zfs_get_data(void *arg, uint64_t gen, lr_write_t *lr, char *buf, } ASSERT(error == 0 || error == ENOENT); } else { /* indirect write */ + ASSERT3P(zio, !=, NULL); /* * Have to lock the whole block to ensure when it's * written out and its checksum is being calculated diff --git a/module/zfs/zil.c b/module/zfs/zil.c index 567787a19b..f2d279e36a 100644 --- a/module/zfs/zil.c +++ b/module/zfs/zil.c @@ -151,7 +151,6 @@ static kmem_cache_t *zil_lwb_cache; static kmem_cache_t *zil_zcw_cache; static void zil_lwb_commit(zilog_t *zilog, lwb_t *lwb, itx_t *itx); -static void zil_lwb_write_issue(zilog_t *zilog, lwb_t *lwb); static itx_t *zil_itx_clone(itx_t *oitx); static int @@ -760,33 +759,52 @@ zil_lwb_vdev_compare(const void *x1, const void *x2) return (TREE_CMP(v1, v2)); } +/* + * Allocate a new lwb. We may already have a block pointer for it, in which + * case we get size and version from there. Or we may not yet, in which case + * we choose them here and later make the block allocation match. + */ static lwb_t * -zil_alloc_lwb(zilog_t *zilog, blkptr_t *bp, boolean_t slog, uint64_t txg) +zil_alloc_lwb(zilog_t *zilog, int sz, blkptr_t *bp, boolean_t slog, + uint64_t txg, lwb_state_t state) { lwb_t *lwb; lwb = kmem_cache_alloc(zil_lwb_cache, KM_SLEEP); lwb->lwb_zilog = zilog; - lwb->lwb_blk = *bp; - lwb->lwb_slog = slog; - lwb->lwb_indirect = B_FALSE; - if (BP_GET_CHECKSUM(bp) == ZIO_CHECKSUM_ZILOG2) { - lwb->lwb_nused = lwb->lwb_nfilled = sizeof (zil_chain_t); - lwb->lwb_sz = BP_GET_LSIZE(bp); + if (bp) { + lwb->lwb_blk = *bp; + lwb->lwb_slim = (BP_GET_CHECKSUM(bp) == ZIO_CHECKSUM_ZILOG2); + sz = BP_GET_LSIZE(bp); } else { - lwb->lwb_nused = lwb->lwb_nfilled = 0; - lwb->lwb_sz = BP_GET_LSIZE(bp) - sizeof (zil_chain_t); + BP_ZERO(&lwb->lwb_blk); + lwb->lwb_slim = (spa_version(zilog->zl_spa) >= + SPA_VERSION_SLIM_ZIL); } - lwb->lwb_state = LWB_STATE_CLOSED; - lwb->lwb_buf = zio_buf_alloc(BP_GET_LSIZE(bp)); + lwb->lwb_slog = slog; + lwb->lwb_error = 0; + if (lwb->lwb_slim) { + lwb->lwb_nmax = sz; + lwb->lwb_nused = lwb->lwb_nfilled = sizeof (zil_chain_t); + } else { + lwb->lwb_nmax = sz - sizeof (zil_chain_t); + lwb->lwb_nused = lwb->lwb_nfilled = 0; + } + lwb->lwb_sz = sz; + lwb->lwb_state = state; + lwb->lwb_buf = zio_buf_alloc(sz); + lwb->lwb_child_zio = NULL; lwb->lwb_write_zio = NULL; lwb->lwb_root_zio = NULL; lwb->lwb_issued_timestamp = 0; lwb->lwb_issued_txg = 0; - lwb->lwb_max_txg = txg; + lwb->lwb_alloc_txg = txg; + lwb->lwb_max_txg = 0; mutex_enter(&zilog->zl_lock); list_insert_tail(&zilog->zl_lwb_list, lwb); + if (state != LWB_STATE_NEW) + zilog->zl_last_lwb_opened = lwb; mutex_exit(&zilog->zl_lock); return (lwb); @@ -800,10 +818,12 @@ zil_free_lwb(zilog_t *zilog, lwb_t *lwb) VERIFY(list_is_empty(&lwb->lwb_waiters)); VERIFY(list_is_empty(&lwb->lwb_itxs)); ASSERT(avl_is_empty(&lwb->lwb_vdev_tree)); + ASSERT3P(lwb->lwb_child_zio, ==, NULL); ASSERT3P(lwb->lwb_write_zio, ==, NULL); ASSERT3P(lwb->lwb_root_zio, ==, NULL); + ASSERT3U(lwb->lwb_alloc_txg, <=, spa_syncing_txg(zilog->zl_spa)); ASSERT3U(lwb->lwb_max_txg, <=, spa_syncing_txg(zilog->zl_spa)); - ASSERT(lwb->lwb_state == LWB_STATE_CLOSED || + ASSERT(lwb->lwb_state == LWB_STATE_NEW || lwb->lwb_state == LWB_STATE_FLUSH_DONE); /* @@ -954,7 +974,7 @@ zil_create(zilog_t *zilog) * Allocate a log write block (lwb) for the first log block. */ if (error == 0) - lwb = zil_alloc_lwb(zilog, &blk, slog, txg); + lwb = zil_alloc_lwb(zilog, 0, &blk, slog, txg, LWB_STATE_NEW); /* * If we just allocated the first log block, commit our transaction @@ -1041,7 +1061,8 @@ zil_destroy(zilog_t *zilog, boolean_t keep_first) while ((lwb = list_remove_head(&zilog->zl_lwb_list)) != NULL) { if (lwb->lwb_buf != NULL) zio_buf_free(lwb->lwb_buf, lwb->lwb_sz); - zio_free(zilog->zl_spa, txg, &lwb->lwb_blk); + if (!BP_IS_HOLE(&lwb->lwb_blk)) + zio_free(zilog->zl_spa, txg, &lwb->lwb_blk); zil_free_lwb(zilog, lwb); } } else if (!keep_first) { @@ -1269,21 +1290,21 @@ zil_commit_waiter_link_lwb(zil_commit_waiter_t *zcw, lwb_t *lwb) { /* * The lwb_waiters field of the lwb is protected by the zilog's - * zl_lock, thus it must be held when calling this function. + * zl_issuer_lock while the lwb is open and zl_lock otherwise. + * zl_issuer_lock also protects leaving the open state. + * zcw_lwb setting is protected by zl_issuer_lock and state != + * flush_done, which transition is protected by zl_lock. */ - ASSERT(MUTEX_HELD(&lwb->lwb_zilog->zl_lock)); + ASSERT(MUTEX_HELD(&lwb->lwb_zilog->zl_issuer_lock)); + IMPLY(lwb->lwb_state != LWB_STATE_OPENED, + MUTEX_HELD(&lwb->lwb_zilog->zl_lock)); + ASSERT3S(lwb->lwb_state, !=, LWB_STATE_NEW); + ASSERT3S(lwb->lwb_state, !=, LWB_STATE_FLUSH_DONE); - mutex_enter(&zcw->zcw_lock); ASSERT(!list_link_active(&zcw->zcw_node)); - ASSERT3P(zcw->zcw_lwb, ==, NULL); - ASSERT3P(lwb, !=, NULL); - ASSERT(lwb->lwb_state == LWB_STATE_OPENED || - lwb->lwb_state == LWB_STATE_ISSUED || - lwb->lwb_state == LWB_STATE_WRITE_DONE); - list_insert_tail(&lwb->lwb_waiters, zcw); + ASSERT3P(zcw->zcw_lwb, ==, NULL); zcw->zcw_lwb = lwb; - mutex_exit(&zcw->zcw_lock); } /* @@ -1294,11 +1315,9 @@ zil_commit_waiter_link_lwb(zil_commit_waiter_t *zcw, lwb_t *lwb) static void zil_commit_waiter_link_nolwb(zil_commit_waiter_t *zcw, list_t *nolwb) { - mutex_enter(&zcw->zcw_lock); ASSERT(!list_link_active(&zcw->zcw_node)); - ASSERT3P(zcw->zcw_lwb, ==, NULL); list_insert_tail(nolwb, zcw); - mutex_exit(&zcw->zcw_lock); + ASSERT3P(zcw->zcw_lwb, ==, NULL); } void @@ -1484,7 +1503,7 @@ zil_lwb_flush_wait_all(zilog_t *zilog, uint64_t txg) mutex_enter(&zilog->zl_lock); mutex_enter(&zilog->zl_lwb_io_lock); lwb_t *lwb = list_head(&zilog->zl_lwb_list); - while (lwb != NULL && lwb->lwb_max_txg <= txg) { + while (lwb != NULL) { if (lwb->lwb_issued_txg <= txg) { ASSERT(lwb->lwb_state != LWB_STATE_ISSUED); ASSERT(lwb->lwb_state != LWB_STATE_WRITE_DONE); @@ -1527,14 +1546,6 @@ zil_lwb_write_done(zio_t *zio) ASSERT3S(spa_config_held(spa, SCL_STATE, RW_READER), !=, 0); - ASSERT(BP_GET_COMPRESS(zio->io_bp) == ZIO_COMPRESS_OFF); - ASSERT(BP_GET_TYPE(zio->io_bp) == DMU_OT_INTENT_LOG); - ASSERT(BP_GET_LEVEL(zio->io_bp) == 0); - ASSERT(BP_GET_BYTEORDER(zio->io_bp) == ZFS_HOST_BYTEORDER); - ASSERT(!BP_IS_GANG(zio->io_bp)); - ASSERT(!BP_IS_HOLE(zio->io_bp)); - ASSERT(BP_GET_FILL(zio->io_bp) == 0); - abd_free(zio->io_abd); zio_buf_free(lwb->lwb_buf, lwb->lwb_sz); lwb->lwb_buf = NULL; @@ -1542,6 +1553,7 @@ zil_lwb_write_done(zio_t *zio) mutex_enter(&zilog->zl_lock); ASSERT3S(lwb->lwb_state, ==, LWB_STATE_ISSUED); lwb->lwb_state = LWB_STATE_WRITE_DONE; + lwb->lwb_child_zio = NULL; lwb->lwb_write_zio = NULL; nlwb = list_next(&zilog->zl_lwb_list, lwb); mutex_exit(&zilog->zl_lock); @@ -1606,116 +1618,75 @@ zil_lwb_write_done(zio_t *zio) } } +/* + * Build the zio dependency chain, which is used to preserve the ordering of + * lwb completions that is required by the semantics of the ZIL. Each new lwb + * zio becomes a parent of the previous lwb zio, such that the new lwb's zio + * cannot complete until the previous lwb's zio completes. + * + * This is required by the semantics of zil_commit(): the commit waiters + * attached to the lwbs will be woken in the lwb zio's completion callback, + * so this zio dependency graph ensures the waiters are woken in the correct + * order (the same order the lwbs were created). + */ static void zil_lwb_set_zio_dependency(zilog_t *zilog, lwb_t *lwb) { - lwb_t *last_lwb_opened = zilog->zl_last_lwb_opened; - - ASSERT(MUTEX_HELD(&zilog->zl_issuer_lock)); ASSERT(MUTEX_HELD(&zilog->zl_lock)); + lwb_t *prev_lwb = list_prev(&zilog->zl_lwb_list, lwb); + if (prev_lwb == NULL || + prev_lwb->lwb_state == LWB_STATE_FLUSH_DONE) + return; + /* - * The zilog's "zl_last_lwb_opened" field is used to build the - * lwb/zio dependency chain, which is used to preserve the - * ordering of lwb completions that is required by the semantics - * of the ZIL. Each new lwb zio becomes a parent of the - * "previous" lwb zio, such that the new lwb's zio cannot - * complete until the "previous" lwb's zio completes. + * If the previous lwb's write hasn't already completed, we also want + * to order the completion of the lwb write zios (above, we only order + * the completion of the lwb root zios). This is required because of + * how we can defer the DKIOCFLUSHWRITECACHE commands for each lwb. * - * This is required by the semantics of zil_commit(); the commit - * waiters attached to the lwbs will be woken in the lwb zio's - * completion callback, so this zio dependency graph ensures the - * waiters are woken in the correct order (the same order the - * lwbs were created). + * When the DKIOCFLUSHWRITECACHE commands are deferred, the previous + * lwb will rely on this lwb to flush the vdevs written to by that + * previous lwb. Thus, we need to ensure this lwb doesn't issue the + * flush until after the previous lwb's write completes. We ensure + * this ordering by setting the zio parent/child relationship here. + * + * Without this relationship on the lwb's write zio, it's possible + * for this lwb's write to complete prior to the previous lwb's write + * completing; and thus, the vdevs for the previous lwb would be + * flushed prior to that lwb's data being written to those vdevs (the + * vdevs are flushed in the lwb write zio's completion handler, + * zil_lwb_write_done()). */ - if (last_lwb_opened != NULL && - last_lwb_opened->lwb_state != LWB_STATE_FLUSH_DONE) { - ASSERT(last_lwb_opened->lwb_state == LWB_STATE_OPENED || - last_lwb_opened->lwb_state == LWB_STATE_ISSUED || - last_lwb_opened->lwb_state == LWB_STATE_WRITE_DONE); - - ASSERT3P(last_lwb_opened->lwb_root_zio, !=, NULL); - zio_add_child(lwb->lwb_root_zio, - last_lwb_opened->lwb_root_zio); - - /* - * If the previous lwb's write hasn't already completed, - * we also want to order the completion of the lwb write - * zios (above, we only order the completion of the lwb - * root zios). This is required because of how we can - * defer the DKIOCFLUSHWRITECACHE commands for each lwb. - * - * When the DKIOCFLUSHWRITECACHE commands are deferred, - * the previous lwb will rely on this lwb to flush the - * vdevs written to by that previous lwb. Thus, we need - * to ensure this lwb doesn't issue the flush until - * after the previous lwb's write completes. We ensure - * this ordering by setting the zio parent/child - * relationship here. - * - * Without this relationship on the lwb's write zio, - * it's possible for this lwb's write to complete prior - * to the previous lwb's write completing; and thus, the - * vdevs for the previous lwb would be flushed prior to - * that lwb's data being written to those vdevs (the - * vdevs are flushed in the lwb write zio's completion - * handler, zil_lwb_write_done()). - */ - if (last_lwb_opened->lwb_state != LWB_STATE_WRITE_DONE) { - ASSERT(last_lwb_opened->lwb_state == LWB_STATE_OPENED || - last_lwb_opened->lwb_state == LWB_STATE_ISSUED); - - ASSERT3P(last_lwb_opened->lwb_write_zio, !=, NULL); - zio_add_child(lwb->lwb_write_zio, - last_lwb_opened->lwb_write_zio); - } + if (prev_lwb->lwb_state == LWB_STATE_ISSUED) { + ASSERT3P(prev_lwb->lwb_write_zio, !=, NULL); + zio_add_child(lwb->lwb_write_zio, prev_lwb->lwb_write_zio); + } else { + ASSERT3S(prev_lwb->lwb_state, ==, LWB_STATE_WRITE_DONE); } + + ASSERT3P(prev_lwb->lwb_root_zio, !=, NULL); + zio_add_child(lwb->lwb_root_zio, prev_lwb->lwb_root_zio); } /* * This function's purpose is to "open" an lwb such that it is ready to - * accept new itxs being committed to it. To do this, the lwb's zio - * structures are created, and linked to the lwb. This function is - * idempotent; if the passed in lwb has already been opened, this - * function is essentially a no-op. + * accept new itxs being committed to it. This function is idempotent; if + * the passed in lwb has already been opened, it is essentially a no-op. */ static void zil_lwb_write_open(zilog_t *zilog, lwb_t *lwb) { - zbookmark_phys_t zb; - zio_priority_t prio; - ASSERT(MUTEX_HELD(&zilog->zl_issuer_lock)); - ASSERT3P(lwb, !=, NULL); - EQUIV(lwb->lwb_root_zio == NULL, lwb->lwb_state == LWB_STATE_CLOSED); - EQUIV(lwb->lwb_root_zio != NULL, lwb->lwb_state == LWB_STATE_OPENED); - if (lwb->lwb_root_zio != NULL) + if (lwb->lwb_state != LWB_STATE_NEW) { + ASSERT3S(lwb->lwb_state, ==, LWB_STATE_OPENED); return; - - lwb->lwb_root_zio = zio_root(zilog->zl_spa, - zil_lwb_flush_vdevs_done, lwb, ZIO_FLAG_CANFAIL); - - abd_t *lwb_abd = abd_get_from_buf(lwb->lwb_buf, - BP_GET_LSIZE(&lwb->lwb_blk)); - - if (!lwb->lwb_slog || zilog->zl_cur_used <= zil_slog_bulk) - prio = ZIO_PRIORITY_SYNC_WRITE; - else - prio = ZIO_PRIORITY_ASYNC_WRITE; - - SET_BOOKMARK(&zb, lwb->lwb_blk.blk_cksum.zc_word[ZIL_ZC_OBJSET], - ZB_ZIL_OBJECT, ZB_ZIL_LEVEL, - lwb->lwb_blk.blk_cksum.zc_word[ZIL_ZC_SEQ]); - - lwb->lwb_write_zio = zio_rewrite(lwb->lwb_root_zio, zilog->zl_spa, 0, - &lwb->lwb_blk, lwb_abd, BP_GET_LSIZE(&lwb->lwb_blk), - zil_lwb_write_done, lwb, prio, ZIO_FLAG_CANFAIL, &zb); + } mutex_enter(&zilog->zl_lock); lwb->lwb_state = LWB_STATE_OPENED; - zil_lwb_set_zio_dependency(zilog, lwb); zilog->zl_last_lwb_opened = lwb; mutex_exit(&zilog->zl_lock); } @@ -1752,57 +1723,21 @@ static uint_t zil_maxblocksize = SPA_OLD_MAXBLOCKSIZE; * Has to be called under zl_issuer_lock to chain more lwbs. */ static lwb_t * -zil_lwb_write_close(zilog_t *zilog, lwb_t *lwb, list_t *ilwbs) +zil_lwb_write_close(zilog_t *zilog, lwb_t *lwb, lwb_state_t state) { - lwb_t *nlwb = NULL; - zil_chain_t *zilc; - spa_t *spa = zilog->zl_spa; - blkptr_t *bp; - dmu_tx_t *tx; - uint64_t txg; - uint64_t zil_blksz; - int i, error; - boolean_t slog; + int i; ASSERT(MUTEX_HELD(&zilog->zl_issuer_lock)); - ASSERT3P(lwb->lwb_root_zio, !=, NULL); - ASSERT3P(lwb->lwb_write_zio, !=, NULL); ASSERT3S(lwb->lwb_state, ==, LWB_STATE_OPENED); + lwb->lwb_state = LWB_STATE_CLOSED; /* - * If this lwb includes indirect writes, we have to commit before - * creating the transaction, otherwise we may end up in dead lock. + * If there was an allocation failure then returned NULL will trigger + * zil_commit_writer_stall() at the caller. This is inherently racy, + * since allocation may not have happened yet. */ - if (lwb->lwb_indirect) { - for (itx_t *itx = list_head(&lwb->lwb_itxs); itx; - itx = list_next(&lwb->lwb_itxs, itx)) - zil_lwb_commit(zilog, lwb, itx); - lwb->lwb_nused = lwb->lwb_nfilled; - } - - /* - * Allocate the next block and save its address in this block - * before writing it in order to establish the log chain. - */ - - tx = dmu_tx_create(zilog->zl_os); - - /* - * Since we are not going to create any new dirty data, and we - * can even help with clearing the existing dirty data, we - * should not be subject to the dirty data based delays. We - * use TXG_NOTHROTTLE to bypass the delay mechanism. - */ - VERIFY0(dmu_tx_assign(tx, TXG_WAIT | TXG_NOTHROTTLE)); - - dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx); - txg = dmu_tx_get_txg(tx); - - mutex_enter(&zilog->zl_lwb_io_lock); - lwb->lwb_issued_txg = txg; - zilog->zl_lwb_inflight[txg & TXG_MASK]++; - zilog->zl_lwb_max_issued_txg = MAX(txg, zilog->zl_lwb_max_issued_txg); - mutex_exit(&zilog->zl_lwb_io_lock); + if (lwb->lwb_error != 0) + return (NULL); /* * Log blocks are pre-allocated. Here we select the size of the next @@ -1820,7 +1755,7 @@ zil_lwb_write_close(zilog_t *zilog, lwb_t *lwb, list_t *ilwbs) * the maximum block size because we can exhaust the available * pool log space. */ - zil_blksz = zilog->zl_cur_used + sizeof (zil_chain_t); + uint64_t zil_blksz = zilog->zl_cur_used + sizeof (zil_chain_t); for (i = 0; zil_blksz > zil_block_buckets[i].limit; i++) continue; zil_blksz = MIN(zil_block_buckets[i].blksz, zilog->zl_max_block_size); @@ -1832,94 +1767,149 @@ zil_lwb_write_close(zilog_t *zilog, lwb_t *lwb, list_t *ilwbs) uint64_t, zilog->zl_prev_blks[zilog->zl_prev_rotor]); zilog->zl_prev_rotor = (zilog->zl_prev_rotor + 1) & (ZIL_PREV_BLKS - 1); - if (BP_GET_CHECKSUM(&lwb->lwb_blk) == ZIO_CHECKSUM_ZILOG2) - zilc = (zil_chain_t *)lwb->lwb_buf; - else - zilc = (zil_chain_t *)(lwb->lwb_buf + lwb->lwb_sz); - bp = &zilc->zc_next_blk; - BP_ZERO(bp); - error = zio_alloc_zil(spa, zilog->zl_os, txg, bp, zil_blksz, &slog); - if (error == 0) { - ASSERT3U(bp->blk_birth, ==, txg); - bp->blk_cksum = lwb->lwb_blk.blk_cksum; - bp->blk_cksum.zc_word[ZIL_ZC_SEQ]++; - - /* - * Allocate a new log write block (lwb). - */ - nlwb = zil_alloc_lwb(zilog, bp, slog, txg); - } - - lwb->lwb_state = LWB_STATE_ISSUED; - - dmu_tx_commit(tx); - - /* - * We need to acquire the config lock for the lwb to issue it later. - * However, if we already have a queue of closed parent lwbs already - * holding the config lock (but not yet issued), we can't block here - * waiting on the lock or we will deadlock. In that case we must - * first issue to parent IOs before waiting on the lock. - */ - if (ilwbs && !list_is_empty(ilwbs)) { - if (!spa_config_tryenter(spa, SCL_STATE, lwb, RW_READER)) { - lwb_t *tlwb; - while ((tlwb = list_remove_head(ilwbs)) != NULL) - zil_lwb_write_issue(zilog, tlwb); - spa_config_enter(spa, SCL_STATE, lwb, RW_READER); - } - } else { - spa_config_enter(spa, SCL_STATE, lwb, RW_READER); - } - - if (ilwbs) - list_insert_tail(ilwbs, lwb); - - /* - * If there was an allocation failure then nlwb will be null which - * forces a txg_wait_synced(). - */ - return (nlwb); + return (zil_alloc_lwb(zilog, zil_blksz, NULL, 0, 0, state)); } /* * Finalize previously closed block and issue the write zio. - * Does not require locking. */ static void zil_lwb_write_issue(zilog_t *zilog, lwb_t *lwb) { + spa_t *spa = zilog->zl_spa; zil_chain_t *zilc; - int wsz; + boolean_t slog; + zbookmark_phys_t zb; + zio_priority_t prio; + int error; - /* Actually fill the lwb with the data if not yet. */ - if (!lwb->lwb_indirect) { - for (itx_t *itx = list_head(&lwb->lwb_itxs); itx; - itx = list_next(&lwb->lwb_itxs, itx)) - zil_lwb_commit(zilog, lwb, itx); - lwb->lwb_nused = lwb->lwb_nfilled; - } + ASSERT3S(lwb->lwb_state, ==, LWB_STATE_CLOSED); - if (BP_GET_CHECKSUM(&lwb->lwb_blk) == ZIO_CHECKSUM_ZILOG2) { - /* For Slim ZIL only write what is used. */ - wsz = P2ROUNDUP_TYPED(lwb->lwb_nused, ZIL_MIN_BLKSZ, int); - ASSERT3S(wsz, <=, lwb->lwb_sz); - zio_shrink(lwb->lwb_write_zio, wsz); - wsz = lwb->lwb_write_zio->io_size; + /* Actually fill the lwb with the data. */ + for (itx_t *itx = list_head(&lwb->lwb_itxs); itx; + itx = list_next(&lwb->lwb_itxs, itx)) + zil_lwb_commit(zilog, lwb, itx); + lwb->lwb_nused = lwb->lwb_nfilled; - zilc = (zil_chain_t *)lwb->lwb_buf; - } else { - wsz = lwb->lwb_sz; - zilc = (zil_chain_t *)(lwb->lwb_buf + lwb->lwb_sz); - } - zilc->zc_pad = 0; - zilc->zc_nused = lwb->lwb_nused; - zilc->zc_eck.zec_cksum = lwb->lwb_blk.blk_cksum; + lwb->lwb_root_zio = zio_root(spa, zil_lwb_flush_vdevs_done, lwb, + ZIO_FLAG_CANFAIL); /* - * clear unused data for security + * The lwb is now ready to be issued, but it can be only if it already + * got its block pointer allocated or the allocation has failed. + * Otherwise leave it as-is, relying on some other thread to issue it + * after allocating its block pointer via calling zil_lwb_write_issue() + * for the previous lwb(s) in the chain. */ - memset(lwb->lwb_buf + lwb->lwb_nused, 0, wsz - lwb->lwb_nused); + mutex_enter(&zilog->zl_lock); + lwb->lwb_state = LWB_STATE_READY; + if (BP_IS_HOLE(&lwb->lwb_blk) && lwb->lwb_error == 0) { + mutex_exit(&zilog->zl_lock); + return; + } + mutex_exit(&zilog->zl_lock); + +next_lwb: + if (lwb->lwb_slim) + zilc = (zil_chain_t *)lwb->lwb_buf; + else + zilc = (zil_chain_t *)(lwb->lwb_buf + lwb->lwb_nmax); + int wsz = lwb->lwb_sz; + if (lwb->lwb_error == 0) { + abd_t *lwb_abd = abd_get_from_buf(lwb->lwb_buf, lwb->lwb_sz); + if (!lwb->lwb_slog || zilog->zl_cur_used <= zil_slog_bulk) + prio = ZIO_PRIORITY_SYNC_WRITE; + else + prio = ZIO_PRIORITY_ASYNC_WRITE; + SET_BOOKMARK(&zb, lwb->lwb_blk.blk_cksum.zc_word[ZIL_ZC_OBJSET], + ZB_ZIL_OBJECT, ZB_ZIL_LEVEL, + lwb->lwb_blk.blk_cksum.zc_word[ZIL_ZC_SEQ]); + lwb->lwb_write_zio = zio_rewrite(lwb->lwb_root_zio, spa, 0, + &lwb->lwb_blk, lwb_abd, lwb->lwb_sz, zil_lwb_write_done, + lwb, prio, ZIO_FLAG_CANFAIL, &zb); + zil_lwb_add_block(lwb, &lwb->lwb_blk); + + if (lwb->lwb_slim) { + /* For Slim ZIL only write what is used. */ + wsz = P2ROUNDUP_TYPED(lwb->lwb_nused, ZIL_MIN_BLKSZ, + int); + ASSERT3S(wsz, <=, lwb->lwb_sz); + zio_shrink(lwb->lwb_write_zio, wsz); + wsz = lwb->lwb_write_zio->io_size; + } + memset(lwb->lwb_buf + lwb->lwb_nused, 0, wsz - lwb->lwb_nused); + zilc->zc_pad = 0; + zilc->zc_nused = lwb->lwb_nused; + zilc->zc_eck.zec_cksum = lwb->lwb_blk.blk_cksum; + } else { + /* + * We can't write the lwb if there was an allocation failure, + * so create a null zio instead just to maintain dependencies. + */ + lwb->lwb_write_zio = zio_null(lwb->lwb_root_zio, spa, NULL, + zil_lwb_write_done, lwb, ZIO_FLAG_CANFAIL); + lwb->lwb_write_zio->io_error = lwb->lwb_error; + } + if (lwb->lwb_child_zio) + zio_add_child(lwb->lwb_write_zio, lwb->lwb_child_zio); + + /* + * Open transaction to allocate the next block pointer. + */ + dmu_tx_t *tx = dmu_tx_create(zilog->zl_os); + VERIFY0(dmu_tx_assign(tx, TXG_WAIT | TXG_NOTHROTTLE)); + dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx); + uint64_t txg = dmu_tx_get_txg(tx); + + /* + * Allocate next the block pointer unless we are already in error. + */ + lwb_t *nlwb = list_next(&zilog->zl_lwb_list, lwb); + blkptr_t *bp = &zilc->zc_next_blk; + BP_ZERO(bp); + error = lwb->lwb_error; + if (error == 0) { + error = zio_alloc_zil(spa, zilog->zl_os, txg, bp, nlwb->lwb_sz, + &slog); + } + if (error == 0) { + ASSERT3U(bp->blk_birth, ==, txg); + BP_SET_CHECKSUM(bp, nlwb->lwb_slim ? ZIO_CHECKSUM_ZILOG2 : + ZIO_CHECKSUM_ZILOG); + bp->blk_cksum = lwb->lwb_blk.blk_cksum; + bp->blk_cksum.zc_word[ZIL_ZC_SEQ]++; + } + + /* + * Reduce TXG open time by incrementing inflight counter and committing + * the transaciton. zil_sync() will wait for it to return to zero. + */ + mutex_enter(&zilog->zl_lwb_io_lock); + lwb->lwb_issued_txg = txg; + zilog->zl_lwb_inflight[txg & TXG_MASK]++; + zilog->zl_lwb_max_issued_txg = MAX(txg, zilog->zl_lwb_max_issued_txg); + mutex_exit(&zilog->zl_lwb_io_lock); + dmu_tx_commit(tx); + + spa_config_enter(spa, SCL_STATE, lwb, RW_READER); + + /* + * We've completed all potentially blocking operations. Update the + * nlwb and allow it proceed without possible lock order reversals. + */ + mutex_enter(&zilog->zl_lock); + zil_lwb_set_zio_dependency(zilog, lwb); + lwb->lwb_state = LWB_STATE_ISSUED; + + if (nlwb) { + nlwb->lwb_blk = *bp; + nlwb->lwb_error = error; + nlwb->lwb_slog = slog; + nlwb->lwb_alloc_txg = txg; + if (nlwb->lwb_state != LWB_STATE_READY) + nlwb = NULL; + } + mutex_exit(&zilog->zl_lock); if (lwb->lwb_slog) { ZIL_STAT_BUMP(zilog, zil_itx_metaslab_slog_count); @@ -1938,11 +1928,19 @@ zil_lwb_write_issue(zilog_t *zilog, lwb_t *lwb) ZIL_STAT_INCR(zilog, zil_itx_metaslab_normal_alloc, BP_GET_LSIZE(&lwb->lwb_blk)); } - ASSERT(spa_config_held(zilog->zl_spa, SCL_STATE, RW_READER)); - zil_lwb_add_block(lwb, &lwb->lwb_blk); lwb->lwb_issued_timestamp = gethrtime(); zio_nowait(lwb->lwb_root_zio); zio_nowait(lwb->lwb_write_zio); + if (lwb->lwb_child_zio) + zio_nowait(lwb->lwb_child_zio); + + /* + * If nlwb was ready when we gave it the block pointer, + * it is on us to issue it and possibly following ones. + */ + lwb = nlwb; + if (lwb) + goto next_lwb; } /* @@ -2014,10 +2012,7 @@ zil_lwb_assign(zilog_t *zilog, lwb_t *lwb, itx_t *itx, list_t *ilwbs) * For more details, see the comment above zil_commit(). */ if (lr->lrc_txtype == TX_COMMIT) { - mutex_enter(&zilog->zl_lock); zil_commit_waiter_link_lwb(itx->itx_private, lwb); - itx->itx_private = NULL; - mutex_exit(&zilog->zl_lock); list_insert_tail(&lwb->lwb_itxs, itx); return (lwb); } @@ -2036,17 +2031,17 @@ cont: * If this record won't fit in the current log block, start a new one. * For WR_NEED_COPY optimize layout for minimal number of chunks. */ - lwb_sp = lwb->lwb_sz - lwb->lwb_nused; + lwb_sp = lwb->lwb_nmax - lwb->lwb_nused; max_log_data = zil_max_log_data(zilog, sizeof (lr_write_t)); if (reclen > lwb_sp || (reclen + dlen > lwb_sp && lwb_sp < zil_max_waste_space(zilog) && (dlen % max_log_data == 0 || lwb_sp < reclen + dlen % max_log_data))) { - lwb = zil_lwb_write_close(zilog, lwb, ilwbs); + list_insert_tail(ilwbs, lwb); + lwb = zil_lwb_write_close(zilog, lwb, LWB_STATE_OPENED); if (lwb == NULL) return (NULL); - zil_lwb_write_open(zilog, lwb); - lwb_sp = lwb->lwb_sz - lwb->lwb_nused; + lwb_sp = lwb->lwb_nmax - lwb->lwb_nused; /* * There must be enough space in the new, empty log block to @@ -2084,7 +2079,7 @@ cont: clr->lrc_seq = ++zilog->zl_lr_seq; lwb->lwb_nused += reclen + dnow; - ASSERT3U(lwb->lwb_nused, <=, lwb->lwb_sz); + ASSERT3U(lwb->lwb_nused, <=, lwb->lwb_nmax); ASSERT0(P2PHASE(lwb->lwb_nused, sizeof (uint64_t))); zil_lwb_add_txg(lwb, lr->lrc_txg); @@ -2096,22 +2091,9 @@ cont: goto cont; } - /* - * We have to really issue all queued LWBs before we may have to - * wait for a txg sync. Otherwise we may end up in a dead lock. - */ - if (lr->lrc_txtype == TX_WRITE) { - boolean_t frozen = lr->lrc_txg > spa_freeze_txg(zilog->zl_spa); - if (frozen || itx->itx_wr_state == WR_INDIRECT) { - lwb_t *tlwb; - while ((tlwb = list_remove_head(ilwbs)) != NULL) - zil_lwb_write_issue(zilog, tlwb); - } - if (itx->itx_wr_state == WR_INDIRECT) - lwb->lwb_indirect = B_TRUE; - if (frozen) - txg_wait_synced(zilog->zl_dmu_pool, lr->lrc_txg); - } + if (lr->lrc_txtype == TX_WRITE && + lr->lrc_txg > spa_freeze_txg(zilog->zl_spa)) + txg_wait_synced(zilog->zl_dmu_pool, lr->lrc_txg); return (lwb); } @@ -2174,26 +2156,24 @@ zil_lwb_commit(zilog_t *zilog, lwb_t *lwb, itx_t *itx) ZIL_STAT_BUMP(zilog, zil_itx_indirect_count); ZIL_STAT_INCR(zilog, zil_itx_indirect_bytes, lrw->lr_length); + if (lwb->lwb_child_zio == NULL) { + lwb->lwb_child_zio = zio_root( + zilog->zl_spa, NULL, NULL, + ZIO_FLAG_CANFAIL); + } } /* - * We pass in the "lwb_write_zio" rather than - * "lwb_root_zio" so that the "lwb_write_zio" - * becomes the parent of any zio's created by - * the "zl_get_data" callback. The vdevs are - * flushed after the "lwb_write_zio" completes, - * so we want to make sure that completion - * callback waits for these additional zio's, - * such that the vdevs used by those zio's will - * be included in the lwb's vdev tree, and those - * vdevs will be properly flushed. If we passed - * in "lwb_root_zio" here, then these additional - * vdevs may not be flushed; e.g. if these zio's - * completed after "lwb_write_zio" completed. + * The "lwb_child_zio" we pass in will become a child of + * "lwb_write_zio", when one is created, so one will be + * a parent of any zio's created by the "zl_get_data". + * This way "lwb_write_zio" will first wait for children + * block pointers before own writing, and then for their + * writing completion before the vdev cache flushing. */ error = zilog->zl_get_data(itx->itx_private, itx->itx_gen, lrwb, dbuf, lwb, - lwb->lwb_write_zio); + lwb->lwb_child_zio); if (dbuf != NULL && error == 0) { /* Zero any padding bytes in the last block. */ memset((char *)dbuf + lrwb->lr_length, 0, @@ -2226,12 +2206,8 @@ zil_lwb_commit(zilog_t *zilog, lwb_t *lwb, itx_t *itx) error); zfs_fallthrough; case EIO: - if (lwb->lwb_indirect) { - txg_wait_synced(zilog->zl_dmu_pool, - lr->lrc_txg); - } else { - lwb->lwb_write_zio->io_error = error; - } + txg_wait_synced(zilog->zl_dmu_pool, + lr->lrc_txg); zfs_fallthrough; case ENOENT: zfs_fallthrough; @@ -2675,7 +2651,6 @@ zil_prune_commit_list(zilog_t *zilog) zil_commit_waiter_skip(itx->itx_private); } else { zil_commit_waiter_link_lwb(itx->itx_private, last_lwb); - itx->itx_private = NULL; } mutex_exit(&zilog->zl_lock); @@ -2753,10 +2728,9 @@ zil_process_commit_list(zilog_t *zilog, zil_commit_waiter_t *zcw, list_t *ilwbs) * have already been created (zl_lwb_list not empty). */ zil_commit_activate_saxattr_feature(zilog); - ASSERT3S(lwb->lwb_state, !=, LWB_STATE_ISSUED); - ASSERT3S(lwb->lwb_state, !=, LWB_STATE_WRITE_DONE); - ASSERT3S(lwb->lwb_state, !=, LWB_STATE_FLUSH_DONE); - first = (lwb->lwb_state != LWB_STATE_OPENED) && + ASSERT(lwb->lwb_state == LWB_STATE_NEW || + lwb->lwb_state == LWB_STATE_OPENED); + first = (lwb->lwb_state == LWB_STATE_NEW) && ((plwb = list_prev(&zilog->zl_lwb_list, lwb)) == NULL || plwb->lwb_state == LWB_STATE_FLUSH_DONE); } @@ -2880,37 +2854,32 @@ zil_process_commit_list(zilog_t *zilog, zil_commit_waiter_t *zcw, list_t *ilwbs) } else { ASSERT(list_is_empty(&nolwb_waiters)); ASSERT3P(lwb, !=, NULL); - ASSERT3S(lwb->lwb_state, !=, LWB_STATE_ISSUED); - ASSERT3S(lwb->lwb_state, !=, LWB_STATE_WRITE_DONE); - ASSERT3S(lwb->lwb_state, !=, LWB_STATE_FLUSH_DONE); + ASSERT(lwb->lwb_state == LWB_STATE_NEW || + lwb->lwb_state == LWB_STATE_OPENED); /* * At this point, the ZIL block pointed at by the "lwb" - * variable is in one of the following states: "closed" - * or "open". + * variable is in "new" or "opened" state. * - * If it's "closed", then no itxs have been committed to - * it, so there's no point in issuing its zio (i.e. it's - * "empty"). + * If it's "new", then no itxs have been committed to it, so + * there's no point in issuing its zio (i.e. it's "empty"). * - * If it's "open", then it contains one or more itxs that + * If it's "opened", then it contains one or more itxs that * eventually need to be committed to stable storage. In * this case we intentionally do not issue the lwb's zio * to disk yet, and instead rely on one of the following * two mechanisms for issuing the zio: * - * 1. Ideally, there will be more ZIL activity occurring - * on the system, such that this function will be - * immediately called again (not necessarily by the same - * thread) and this lwb's zio will be issued via - * zil_lwb_assign(). This way, the lwb is guaranteed to - * be "full" when it is issued to disk, and we'll make - * use of the lwb's size the best we can. + * 1. Ideally, there will be more ZIL activity occurring on + * the system, such that this function will be immediately + * called again by different thread and this lwb will be + * closed by zil_lwb_assign(). This way, the lwb will be + * "full" when it is issued to disk, and we'll make use of + * the lwb's size the best we can. * * 2. If there isn't sufficient ZIL activity occurring on - * the system, such that this lwb's zio isn't issued via - * zil_lwb_assign(), zil_commit_waiter() will issue the - * lwb's zio. If this occurs, the lwb is not guaranteed + * the system, zil_commit_waiter() will close it and issue + * the zio. If this occurs, the lwb is not guaranteed * to be "full" by the time its zio is issued, and means * the size of the lwb was "too large" given the amount * of ZIL activity occurring on the system at that time. @@ -2940,8 +2909,11 @@ zil_process_commit_list(zilog_t *zilog, zil_commit_waiter_t *zcw, list_t *ilwbs) hrtime_t sleep = zilog->zl_last_lwb_latency * zfs_commit_timeout_pct / 100; if (sleep < zil_min_commit_timeout || - lwb->lwb_sz - lwb->lwb_nused < lwb->lwb_sz / 8) { - lwb = zil_lwb_write_close(zilog, lwb, ilwbs); + lwb->lwb_nmax - lwb->lwb_nused < + lwb->lwb_nmax / 8) { + list_insert_tail(ilwbs, lwb); + lwb = zil_lwb_write_close(zilog, lwb, + LWB_STATE_NEW); zilog->zl_cur_used = 0; if (lwb == NULL) { while ((lwb = list_remove_head(ilwbs)) @@ -3024,7 +2996,7 @@ zil_commit_waiter_timeout(zilog_t *zilog, zil_commit_waiter_t *zcw) lwb_t *lwb = zcw->zcw_lwb; ASSERT3P(lwb, !=, NULL); - ASSERT3S(lwb->lwb_state, !=, LWB_STATE_CLOSED); + ASSERT3S(lwb->lwb_state, !=, LWB_STATE_NEW); /* * If the lwb has already been issued by another thread, we can @@ -3033,9 +3005,7 @@ zil_commit_waiter_timeout(zilog_t *zilog, zil_commit_waiter_t *zcw) * do this prior to acquiring the zl_issuer_lock, to avoid * acquiring it when it's not necessary to do so. */ - if (lwb->lwb_state == LWB_STATE_ISSUED || - lwb->lwb_state == LWB_STATE_WRITE_DONE || - lwb->lwb_state == LWB_STATE_FLUSH_DONE) + if (lwb->lwb_state != LWB_STATE_OPENED) return; /* @@ -3058,8 +3028,8 @@ zil_commit_waiter_timeout(zilog_t *zilog, zil_commit_waiter_t *zcw) * wind up with a use-after-free error below. */ if (zcw->zcw_done) { - lwb = NULL; - goto out; + mutex_exit(&zilog->zl_issuer_lock); + return; } ASSERT3P(lwb, ==, zcw->zcw_lwb); @@ -3070,28 +3040,33 @@ zil_commit_waiter_timeout(zilog_t *zilog, zil_commit_waiter_t *zcw) * second time while holding the lock. * * We don't need to hold the zl_lock since the lwb cannot transition - * from OPENED to ISSUED while we hold the zl_issuer_lock. The lwb - * _can_ transition from ISSUED to DONE, but it's OK to race with + * from OPENED to CLOSED while we hold the zl_issuer_lock. The lwb + * _can_ transition from CLOSED to DONE, but it's OK to race with * that transition since we treat the lwb the same, whether it's in - * the ISSUED or DONE states. + * the CLOSED, ISSUED or DONE states. * * The important thing, is we treat the lwb differently depending on - * if it's ISSUED or OPENED, and block any other threads that might - * attempt to issue this lwb. For that reason we hold the + * if it's OPENED or CLOSED, and block any other threads that might + * attempt to close/issue this lwb. For that reason we hold the * zl_issuer_lock when checking the lwb_state; we must not call - * zil_lwb_write_close() if the lwb had already been issued. + * zil_lwb_write_close() if the lwb had already been closed/issued. * * See the comment above the lwb_state_t structure definition for * more details on the lwb states, and locking requirements. */ - if (lwb->lwb_state == LWB_STATE_ISSUED || - lwb->lwb_state == LWB_STATE_WRITE_DONE || - lwb->lwb_state == LWB_STATE_FLUSH_DONE) { - lwb = NULL; - goto out; + if (lwb->lwb_state != LWB_STATE_OPENED) { + mutex_exit(&zilog->zl_issuer_lock); + return; } - ASSERT3S(lwb->lwb_state, ==, LWB_STATE_OPENED); + /* + * We do not need zcw_lock once we hold zl_issuer_lock and know lwb + * is still open. But we have to drop it to avoid a deadlock in case + * callback of zio issued by zil_lwb_write_issue() try to get it, + * while zil_lwb_write_issue() is blocked on attempt to issue next + * lwb it found in LWB_STATE_READY state. + */ + mutex_exit(&zcw->zcw_lock); /* * As described in the comments above zil_commit_waiter() and @@ -3099,9 +3074,9 @@ zil_commit_waiter_timeout(zilog_t *zilog, zil_commit_waiter_t *zcw) * since we've reached the commit waiter's timeout and it still * hasn't been issued. */ - lwb_t *nlwb = zil_lwb_write_close(zilog, lwb, NULL); + lwb_t *nlwb = zil_lwb_write_close(zilog, lwb, LWB_STATE_NEW); - ASSERT3S(lwb->lwb_state, !=, LWB_STATE_OPENED); + ASSERT3S(lwb->lwb_state, ==, LWB_STATE_CLOSED); /* * Since the lwb's zio hadn't been issued by the time this thread @@ -3124,34 +3099,15 @@ zil_commit_waiter_timeout(zilog_t *zilog, zil_commit_waiter_t *zcw) * "next" lwb on-disk. When this occurs, the ZIL write * pipeline must be stalled; see the comment within the * zil_commit_writer_stall() function for more details. - * - * We must drop the commit waiter's lock prior to - * calling zil_commit_writer_stall() or else we can wind - * up with the following deadlock: - * - * - This thread is waiting for the txg to sync while - * holding the waiter's lock; txg_wait_synced() is - * used within txg_commit_writer_stall(). - * - * - The txg can't sync because it is waiting for this - * lwb's zio callback to call dmu_tx_commit(). - * - * - The lwb's zio callback can't call dmu_tx_commit() - * because it's blocked trying to acquire the waiter's - * lock, which occurs prior to calling dmu_tx_commit() */ - mutex_exit(&zcw->zcw_lock); zil_lwb_write_issue(zilog, lwb); - lwb = NULL; zil_commit_writer_stall(zilog); - mutex_enter(&zcw->zcw_lock); - } - -out: - mutex_exit(&zilog->zl_issuer_lock); - if (lwb) + mutex_exit(&zilog->zl_issuer_lock); + } else { + mutex_exit(&zilog->zl_issuer_lock); zil_lwb_write_issue(zilog, lwb); - ASSERT(MUTEX_HELD(&zcw->zcw_lock)); + } + mutex_enter(&zcw->zcw_lock); } /* @@ -3216,7 +3172,7 @@ zil_commit_waiter(zilog_t *zilog, zil_commit_waiter_t *zcw) * where it's "zcw_lwb" field is NULL, and it hasn't yet * been skipped, so it's "zcw_done" field is still B_FALSE. */ - IMPLY(lwb != NULL, lwb->lwb_state != LWB_STATE_CLOSED); + IMPLY(lwb != NULL, lwb->lwb_state != LWB_STATE_NEW); if (lwb != NULL && lwb->lwb_state == LWB_STATE_OPENED) { ASSERT3B(timedout, ==, B_FALSE); @@ -3264,6 +3220,8 @@ zil_commit_waiter(zilog_t *zilog, zil_commit_waiter_t *zcw) */ IMPLY(lwb != NULL, + lwb->lwb_state == LWB_STATE_CLOSED || + lwb->lwb_state == LWB_STATE_READY || lwb->lwb_state == LWB_STATE_ISSUED || lwb->lwb_state == LWB_STATE_WRITE_DONE || lwb->lwb_state == LWB_STATE_FLUSH_DONE); @@ -3618,10 +3576,11 @@ zil_sync(zilog_t *zilog, dmu_tx_t *tx) while ((lwb = list_head(&zilog->zl_lwb_list)) != NULL) { zh->zh_log = lwb->lwb_blk; if (lwb->lwb_state != LWB_STATE_FLUSH_DONE || - lwb->lwb_max_txg > txg) + lwb->lwb_alloc_txg > txg || lwb->lwb_max_txg > txg) break; list_remove(&zilog->zl_lwb_list, lwb); - zio_free(spa, txg, &lwb->lwb_blk); + if (!BP_IS_HOLE(&lwb->lwb_blk)) + zio_free(spa, txg, &lwb->lwb_blk); zil_free_lwb(zilog, lwb); /* @@ -3825,17 +3784,18 @@ zil_close(zilog_t *zilog) } mutex_enter(&zilog->zl_lock); + txg = zilog->zl_dirty_max_txg; lwb = list_tail(&zilog->zl_lwb_list); - if (lwb == NULL) - txg = zilog->zl_dirty_max_txg; - else - txg = MAX(zilog->zl_dirty_max_txg, lwb->lwb_max_txg); + if (lwb != NULL) { + txg = MAX(txg, lwb->lwb_alloc_txg); + txg = MAX(txg, lwb->lwb_max_txg); + } mutex_exit(&zilog->zl_lock); /* * zl_lwb_max_issued_txg may be larger than lwb_max_txg. It depends * on the time when the dmu_tx transaction is assigned in - * zil_lwb_write_close(). + * zil_lwb_write_issue(). */ mutex_enter(&zilog->zl_lwb_io_lock); txg = MAX(zilog->zl_lwb_max_issued_txg, txg); @@ -3864,8 +3824,7 @@ zil_close(zilog_t *zilog) lwb = list_remove_head(&zilog->zl_lwb_list); if (lwb != NULL) { ASSERT(list_is_empty(&zilog->zl_lwb_list)); - ASSERT3S(lwb->lwb_state, !=, LWB_STATE_ISSUED); - + ASSERT3S(lwb->lwb_state, ==, LWB_STATE_NEW); zio_buf_free(lwb->lwb_buf, lwb->lwb_sz); zil_free_lwb(zilog, lwb); } @@ -3986,7 +3945,7 @@ zil_suspend(const char *osname, void **cookiep) /* * We need to use zil_commit_impl to ensure we wait for all - * LWB_STATE_OPENED and LWB_STATE_ISSUED lwbs to be committed + * LWB_STATE_OPENED, _CLOSED and _READY lwbs to be committed * to disk before proceeding. If we used zil_commit instead, it * would just call txg_wait_synced(), because zl_suspend is set. * txg_wait_synced() doesn't wait for these lwb's to be diff --git a/module/zfs/zio.c b/module/zfs/zio.c index b562710990..7458b416c2 100644 --- a/module/zfs/zio.c +++ b/module/zfs/zio.c @@ -4466,8 +4466,8 @@ zio_ready(zio_t *zio) zio_t *pio, *pio_next; zio_link_t *zl = NULL; - if (zio_wait_for_children(zio, ZIO_CHILD_GANG_BIT | ZIO_CHILD_DDT_BIT, - ZIO_WAIT_READY)) { + if (zio_wait_for_children(zio, ZIO_CHILD_LOGICAL_BIT | + ZIO_CHILD_GANG_BIT | ZIO_CHILD_DDT_BIT, ZIO_WAIT_READY)) { return (NULL); } diff --git a/module/zfs/zvol.c b/module/zfs/zvol.c index bbef53e4e4..cc11fd8061 100644 --- a/module/zfs/zvol.c +++ b/module/zfs/zvol.c @@ -698,7 +698,6 @@ zvol_get_data(void *arg, uint64_t arg2, lr_write_t *lr, char *buf, int error; ASSERT3P(lwb, !=, NULL); - ASSERT3P(zio, !=, NULL); ASSERT3U(size, !=, 0); zgd = kmem_zalloc(sizeof (zgd_t), KM_SLEEP); @@ -717,6 +716,7 @@ zvol_get_data(void *arg, uint64_t arg2, lr_write_t *lr, char *buf, error = dmu_read_by_dnode(zv->zv_dn, offset, size, buf, DMU_READ_NO_PREFETCH); } else { /* indirect write */ + ASSERT3P(zio, !=, NULL); /* * Have to lock the whole block to ensure when it's written out * and its checksum is being calculated that no one can change