Merge commit 'refs/top-bases/linux-zpios' into linux-zpios

config/zfs-build.m4

@@ -49,6 +49,7 @@ CMDDIR=${CMDDIR}
 MODDIR=${MODDIR}
 SCRIPTDIR=${SCRIPTDIR}
 ETCDIR=\${TOPDIR}/etc
+DEVDIR=\${TOPDIR}/dev
 ZPOOLDIR=\${TOPDIR}/scripts/zpool-config
 ZPIOSDIR=\${TOPDIR}/scripts/zpios-test
 ZPIOSPROFILEDIR=\${TOPDIR}/scripts/zpios-profile
@@ -67,6 +68,7 @@ ZPOOL_CREATE_SH=\${SCRIPTDIR}/zpool-create.sh
 ZPIOS_SH=\${SCRIPTDIR}/zpios.sh
 ZPIOS_SURVEY_SH=\${SCRIPTDIR}/zpios-survey.sh
 
+INTREE=1
 LDMOD=/sbin/insmod
 
 KERNEL_MODULES=(                                      \\

etc/zfs/zdev.conf.promise.example

@@ -1,26 +0,0 @@
-#
-# Custom by-path mapping for large JBOD configurations
-#
-# Example Config:
-# Single promise JBOD for RHEL6
-#
-
-# Channel A: PCI Bus 7, Enclosure 0x500304800027367f
-a1	pci-0000:07:00.0-sas-0x500304800027367f-0
-a2	pci-0000:07:00.0-sas-0x500304800027367f-1
-a3	pci-0000:07:00.0-sas-0x500304800027367f-2
-a4	pci-0000:07:00.0-sas-0x500304800027367f-3
-a5	pci-0000:07:00.0-sas-0x500304800027367f-4
-a6	pci-0000:07:00.0-sas-0x500304800027367f-5
-a7	pci-0000:07:00.0-sas-0x500304800027367f-6
-a8	pci-0000:07:00.0-sas-0x500304800027367f-7
-
-# Channel B: PCI Bus 7, Enclosure 0x500304800027367f
-b1	pci-0000:07:00.0-sas-0x500304800027367f-8
-b2	pci-0000:07:00.0-sas-0x500304800027367f-9
-b3	pci-0000:07:00.0-sas-0x500304800027367f-10
-b4	pci-0000:07:00.0-sas-0x500304800027367f-11
-b5	pci-0000:07:00.0-sas-0x500304800027367f-12
-b6	pci-0000:07:00.0-sas-0x500304800027367f-13
-b7	pci-0000:07:00.0-sas-0x500304800027367f-14
-b8	pci-0000:07:00.0-sas-0x500304800027367f-15

etc/zfs/zdev.conf.supermicro.example

@@ -0,0 +1,30 @@
+#
+# Custom by-path mapping for large JBOD configurations
+#
+# Example Config:
+# Single Supermicro JBOD for RHEL6
+#
+
+# Channel A: PCI Bus 7, Enclosure 0x500304800027367f
+a1	pci-0000:07:00.0-sas-0x500304800027367f-0
+a2	pci-0000:07:00.0-sas-0x500304800027367f-1
+a3	pci-0000:07:00.0-sas-0x500304800027367f-2
+a4	pci-0000:07:00.0-sas-0x500304800027367f-3
+
+# Channel B: PCI Bus 7, Enclosure 0x500304800027367f
+b1	pci-0000:07:00.0-sas-0x500304800027367f-4
+b2	pci-0000:07:00.0-sas-0x500304800027367f-5
+b3	pci-0000:07:00.0-sas-0x500304800027367f-6
+b4	pci-0000:07:00.0-sas-0x500304800027367f-7
+
+# Channel C: PCI Bus 7, Enclosure 0x500304800027367f
+c1	pci-0000:07:00.0-sas-0x500304800027367f-8
+c2	pci-0000:07:00.0-sas-0x500304800027367f-9
+c3	pci-0000:07:00.0-sas-0x500304800027367f-10
+c4	pci-0000:07:00.0-sas-0x500304800027367f-11
+
+# Channel D: PCI Bus 7, Enclosure 0x500304800027367f
+d1	pci-0000:07:00.0-sas-0x500304800027367f-12
+d2	pci-0000:07:00.0-sas-0x500304800027367f-13
+d3	pci-0000:07:00.0-sas-0x500304800027367f-14
+d4	pci-0000:07:00.0-sas-0x500304800027367f-15

scripts/common.sh

@@ -21,13 +21,13 @@ FORCE=
 FORCE_FLAG=
 DUMP_LOG=
 ERROR=
-UPATH="/dev/disk/zpool"
 RAID0S=()
 RAID10S=()
 RAIDZS=()
 RAIDZ2S=()
 
 ETCDIR=${ETCDIR:-/etc}
+DEVDIR=${DEVDIR:-/dev/disk/zpool}
 ZPOOLDIR=${ZPOOLDIR:-/usr/libexec/zfs/zpool-config}
 ZPIOSDIR=${ZPIOSDIR:-/usr/libexec/zfs/zpios-test}
 ZPIOSPROFILEDIR=${ZPIOSPROFILEDIR:-/usr/libexec/zfs/zpios-profile}
@@ -53,6 +53,7 @@ INFOMOD=${INFOMOD:-/sbin/modinfo}
 LOSETUP=${LOSETUP:-/sbin/losetup}
 SYSCTL=${SYSCTL:-/sbin/sysctl}
 UDEVADM=${UDEVADM:-/sbin/udevadm}
+AWK=${AWK:-/bin/awk}
 
 die() {
 	echo -e "${PROG}: $1" >&2
@@ -168,7 +169,7 @@ unload_module() {
 
 unload_modules() {
 	local MODULES_REVERSE=( $(echo ${MODULES[@]} |
-		awk '{for (i=NF;i>=1;i--) printf $i" "} END{print ""}') )
+		${AWK} '{for (i=NF;i>=1;i--) printf $i" "} END{print ""}') )
 
 	for MOD in ${MODULES_REVERSE[*]}; do
 		local NAME=`basename ${MOD} .ko`
@@ -214,38 +215,53 @@ unused_loop_device() {
 #
 udev_setup() {
 	local SRC_PATH=$1
-	local SRC_RULES=${ETCDIR}/udev/rules.d/99-zpool.rules
-	local DST_RULES=/etc/udev/rules.d/99-zpool.rules
-	local DST_ZPOOL_ID=/usr/bin/zpool_id
-	local DST_FILE=`basename ${SRC_PATH} | cut -f1-2 -d'.'`
-	local DST_PATH=/etc/zfs/${DST_FILE}
 
-	# XXX: Copy files from source tree to installed system.
+	# When running in tree manually contruct symlinks in tree to
-	# This should be avoided if at all possible, however at
+	# the proper devices.  Symlinks are installed for all entires
-	# the moment I see no clean way to add a udev rules file
+	# in the config file regardless of if that device actually
-	# which is not in the default udevd search paths.  On
+	# exists.  When installed as a package udev can be relied on for
-	# top of the the rules file we add will need to find
+	# this and it will only create links for devices which exist.
-	# the zpool_id support utility and the zdef.conf file.
+	if [ ${INTREE} ]; then
-
+		PWD=`pwd`
-	cp -f ${SRC_PATH} ${DST_PATH}
+		mkdir -p ${DEVDIR}/
-
+		cd ${DEVDIR}/
-	if [ ! -f ${DST_ZPOOL_ID} ]; then
+		${AWK} '!/^#/ && /./ { system( \
-		cp ${ZPOOL_ID} ${DST_ZPOOL_ID}
+			"ln -f -s /dev/disk/by-path/"$2" "$1";" \
-		chmod 755 ${DST_ZPOOL_ID}
+			"ln -f -s /dev/disk/by-path/"$2"-part1 "$1"p1;" \
-	fi
+			"ln -f -s /dev/disk/by-path/"$2"-part9 "$1"p9;" \
-
+			) }' $SRC_PATH
-	if [ ! -f ${DST_RULES} ]; then
+		cd ${PWD}
-		cp ${SRC_RULES} ${DST_RULES}
-		chmod 644 ${DST_RULES}
-	fi
-
-
-	if [ -f ${UDEVADM} ]; then
-		${UDEVADM} trigger
-		${UDEVADM} settle
 	else
-		/sbin/udevtrigger
+		DST_FILE=`basename ${SRC_PATH} | cut -f1-2 -d'.'`
-		/sbin/udevsettle
+		DST_PATH=/etc/zfs/${DST_FILE}
+
+		if [ -e ${DST_PATH} ]; then
+			die "Error: Config ${DST_PATH} already exists"
+		fi
+
+		cp ${SRC_PATH} ${DST_PATH}
+
+		if [ -f ${UDEVADM} ]; then
+			${UDEVADM} trigger
+			${UDEVADM} settle
+		else
+			/sbin/udevtrigger
+			/sbin/udevsettle
+		fi
+	fi
+
+	return 0
+}
+
+udev_cleanup() {
+	local SRC_PATH=$1
+
+	if [ ${INTREE} ]; then
+		PWD=`pwd`
+		cd ${DEVDIR}/
+		${AWK} '!/^#/ && /./ { system( \
+			"rm -f "$1" "$1"p1 "$1"p9") }' $SRC_PATH
+		cd ${PWD}
 	fi
 
 	return 0
@@ -267,7 +283,7 @@ udev_raid0_setup() {
 	for RANK in `seq 1 ${RANKS}`; do
 		for CHANNEL in `seq 1 ${CHANNELS}`; do
 			DISK=`udev_cr2d ${CHANNEL} ${RANK}`
-			RAID0S[${IDX}]="${UPATH}/${DISK}"
+			RAID0S[${IDX}]="${DEVDIR}/${DISK}"
 			let IDX=IDX+1
 		done
 	done
@@ -286,7 +302,7 @@ udev_raid10_setup() {
 			let CHANNEL2=CHANNEL1+1
 			DISK1=`udev_cr2d ${CHANNEL1} ${RANK}`
 			DISK2=`udev_cr2d ${CHANNEL2} ${RANK}`
-			GROUP="${UPATH}/${DISK1} ${UPATH}/${DISK2}"
+			GROUP="${DEVDIR}/${DISK1} ${DEVDIR}/${DISK2}"
 			RAID10S[${IDX}]="mirror ${GROUP}"
 			let IDX=IDX+1
 		done
@@ -305,7 +321,7 @@ udev_raidz_setup() {
 
 		for CHANNEL in `seq 1 ${CHANNELS}`; do
 			DISK=`udev_cr2d ${CHANNEL} ${RANK}`
-			RAIDZ[${CHANNEL}]="${UPATH}/${DISK}"
+			RAIDZ[${CHANNEL}]="${DEVDIR}/${DISK}"
 		done
 
 		RAIDZS[${RANK}]="${RAIDZ[*]}"
@@ -324,7 +340,7 @@ udev_raidz2_setup() {
 
 		for CHANNEL in `seq 1 ${CHANNELS}`; do
 			DISK=`udev_cr2d ${CHANNEL} ${RANK}`
-			RAIDZ2[${CHANNEL}]="${UPATH}/${DISK}"
+			RAIDZ2[${CHANNEL}]="${DEVDIR}/${DISK}"
 		done
 
 		RAIDZ2S[${RANK}]="${RAIDZ2[*]}"

scripts/zpool-config/dragon-raid0-1x70.sh

@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.dragon.example
 }

scripts/zpool-config/dragon-raid10-35x2.sh

@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.dragon.example
 }

scripts/zpool-config/dragon-raidz-7x10.sh

@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.dragon.example
 }

scripts/zpool-config/dragon-raidz2-7x10.sh

@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.dragon.example
 }

scripts/zpool-config/supermicro-raid0-1x16.sh

@@ -1,13 +1,13 @@
 #!/bin/bash
 #
-# Flash (White Box) Raid-0 Configuration (1x16)
+# Supermicro (White Box) Raid-0 Configuration (1x16)
 #
 
-RANKS=8
+RANKS=4
-CHANNELS=2
+CHANNELS=4
 
 zpool_create() {
-	udev_setup ${ETCDIR}/zfs/zdev.conf.promise.example
+	udev_setup ${ETCDIR}/zfs/zdev.conf.supermicro.example
 	udev_raid0_setup ${RANKS} ${CHANNELS}
 
 	msg ${ZPOOL} create ${FORCE_FLAG} ${ZPOOL_NAME} ${RAID0S[*]}
@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.supermicro.example
 }

scripts/zpool-config/supermicro-raid10-8x2.sh

@@ -1,13 +1,13 @@
 #!/bin/bash
 #
-# Flash (White Box) Raid-10 Configuration (10x2(1+1))
+# Supermicro (White Box) Raid-10 Configuration (8x2(1+1))
 #
 
-RANKS=8
+RANKS=4
-CHANNELS=2
+CHANNELS=4
 
 zpool_create() {
-	udev_setup ${ETCDIR}/zfs/zdev.conf.promise.example
+	udev_setup ${ETCDIR}/zfs/zdev.conf.supermicro.example
 	udev_raid10_setup ${RANKS} ${CHANNELS}
 
 	msg ${ZPOOL} create ${FORCE_FLAG} ${ZPOOL_NAME} ${RAID10S[*]}
@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.supermicro.example
 }

scripts/zpool-config/supermicro-raidz-4x4.sh

@@ -1,13 +1,13 @@
 #!/bin/bash
 #
-# Flash (White Box) Raid-Z Configuration (2x8(7+1))
+# Supermicro (White Box) Raid-Z Configuration (4x4(3+1))
 #
 
-RANKS=8
+RANKS=4
-CHANNELS=2
+CHANNELS=4
 
 zpool_create() {
-	udev_setup ${ETCDIR}/zfs/zdev.conf.promise.example
+	udev_setup ${ETCDIR}/zfs/zdev.conf.supermicro.example
 	udev_raidz_setup ${RANKS} ${CHANNELS}
 
 	msg ${ZPOOL} create ${FORCE_FLAG} ${ZPOOL_NAME} ${RAIDZS[*]}
@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.supermicro.example
 }

scripts/zpool-config/supermicro-raidz2-4x4.sh

@@ -1,13 +1,13 @@
 #!/bin/bash
 #
-# Flash (White Box) Raid-Z2 Configuration (2x8(6+2))
+# Supermicro (White Box) Raid-Z2 Configuration (4x4(2+2))
 #
 
-RANKS=8
+RANKS=4
-CHANNELS=2
+CHANNELS=4
 
 zpool_create() {
-	udev_setup ${ETCDIR}/zfs/zdev.conf.promise.example
+	udev_setup ${ETCDIR}/zfs/zdev.conf.supermicro.example
 	udev_raidz2_setup ${RANKS} ${CHANNELS}
 
 	msg ${ZPOOL} create ${FORCE_FLAG} ${ZPOOL_NAME} ${RAIDZ2S[*]}
@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.supermicro.example
 }

scripts/zpool-config/x4550-raid0-1x48.sh

@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.x4550.example
 }

scripts/zpool-config/x4550-raid10-24x2.sh

@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.x4550.example
 }

scripts/zpool-config/x4550-raidz-8x6.sh

@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.x4550.example
 }

scripts/zpool-config/x4550-raidz2-8x6.sh

@@ -17,4 +17,5 @@ zpool_create() {
 zpool_destroy() {
 	msg ${ZPOOL} destroy ${ZPOOL_NAME}
 	${ZPOOL} destroy ${ZPOOL_NAME}
+	udev_cleanup ${ETCDIR}/zfs/zdev.conf.x4550.example
 }