Add enclosure_symlinks option to vdev_id
Add an 'enclosure_symlinks' option to vdev_id.conf. This creates consistently named symlinks to the enclosure devices (/dev/sg*) based off the configuration in vdev_id.conf. The enclosure symlinks show up in /dev/by-enclosure/<prefix>-<channel><num>. The links make it make it easy to run sg_ses on a particular enclosure device. The enclosure links are created in addition to the normal /dev/disk/by-vdev links. 'enclosure_symlinks' is only valid in sas_direct configurations. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Simon Guest <simon.guest@tesujimath.org> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #8194
This commit is contained in:
Tony Hutter
Brian Behlendorf
parent
7c46894081
commit
c66401fae0
|
|
@ -104,6 +104,7 @@ Usage: vdev_id [-h]
|
|||
|
||||
-c specify name of alernate config file [default=$CONFIG]
|
||||
-d specify basename of device (i.e. sda)
|
||||
-e Create enclose device symlinks only (/dev/by-enclosure)
|
||||
-g Storage network topology [default="$TOPOLOGY"]
|
||||
-m Run in multipath mode
|
||||
-p number of phy's per switch port [default=$PHYS_PER_PORT]
|
||||
|
|
@ -417,6 +418,45 @@ scsi_handler() {
|
|||
echo ${CHAN}${SLOT}${PART}
|
||||
}
|
||||
|
||||
# Figure out the name for the enclosure symlink
|
||||
enclosure_handler () {
|
||||
# We get all the info we need from udev's DEVPATH variable:
|
||||
#
|
||||
# DEVPATH=/sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0/host0/subsystem/devices/0:0:0:0/scsi_generic/sg0
|
||||
|
||||
# Get the enclosure ID ("0:0:0:0")
|
||||
ENC=$(basename $(readlink -m "/sys/$DEVPATH/../.."))
|
||||
if [ ! -d /sys/class/enclosure/$ENC ] ; then
|
||||
# Not an enclosure, bail out
|
||||
return
|
||||
fi
|
||||
|
||||
# Get the long sysfs device path to our enclosure. Looks like:
|
||||
# /devices/pci0000:00/0000:00:03.0/0000:05:00.0/host0/port-0:0/ ... /enclosure/0:0:0:0
|
||||
|
||||
ENC_DEVICE=$(readlink /sys/class/enclosure/$ENC)
|
||||
|
||||
# Grab the full path to the hosts port dir:
|
||||
# /devices/pci0000:00/0000:00:03.0/0000:05:00.0/host0/port-0:0
|
||||
PORT_DIR=$(echo $ENC_DEVICE | grep -Eo '.+host[0-9]+/port-[0-9]+:[0-9]+')
|
||||
|
||||
# Get the port number
|
||||
PORT_ID=$(echo $PORT_DIR | grep -Eo "[0-9]+$")
|
||||
|
||||
# The PCI directory is two directories up from the port directory
|
||||
# /sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0
|
||||
PCI_ID_LONG=$(basename $(readlink -m "/sys/$PORT_DIR/../.."))
|
||||
|
||||
# Strip down the PCI address from 0000:05:00.0 to 05:00.0
|
||||
PCI_ID=$(echo "$PCI_ID_LONG" | sed -r 's/^[0-9]+://g')
|
||||
|
||||
# Name our device according to vdev_id.conf (like "L0" or "U1").
|
||||
NAME=$(awk "/channel/{if (\$1 == \"channel\" && \$2 == \"$PCI_ID\" && \
|
||||
\$3 == \"$PORT_ID\") {print \$4int(count[\$4])}; count[\$4]++}" $CONFIG)
|
||||
|
||||
echo "${NAME}"
|
||||
}
|
||||
|
||||
alias_handler () {
|
||||
# Special handling is needed to correctly append a -part suffix
|
||||
# to partitions of device mapper devices. The DEVTYPE attribute
|
||||
|
|
@ -472,7 +512,7 @@ alias_handler () {
|
|||
done
|
||||
}
|
||||
|
||||
while getopts 'c:d:g:mp:h' OPTION; do
|
||||
while getopts 'c:d:eg:mp:h' OPTION; do
|
||||
case ${OPTION} in
|
||||
c)
|
||||
CONFIG=${OPTARG}
|
||||
|
|
@ -480,6 +520,16 @@ while getopts 'c:d:g:mp:h' OPTION; do
|
|||
d)
|
||||
DEV=${OPTARG}
|
||||
;;
|
||||
e)
|
||||
# When udev sees a scsi_generic device, it calls this script with -e to
|
||||
# create the enclosure device symlinks only. We also need
|
||||
# "enclosure_symlinks yes" set in vdev_id.config to actually create the
|
||||
# symlink.
|
||||
ENCLOSURE_MODE=$(awk '{if ($1 == "enclosure_symlinks") print $2}' $CONFIG)
|
||||
if [ "$ENCLOSURE_MODE" != "yes" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
;;
|
||||
g)
|
||||
TOPOLOGY=$OPTARG
|
||||
;;
|
||||
|
|
@ -499,7 +549,7 @@ if [ ! -r $CONFIG ] ; then
|
|||
exit 0
|
||||
fi
|
||||
|
||||
if [ -z "$DEV" ] ; then
|
||||
if [ -z "$DEV" -a -z "$ENCLOSURE_MODE" ] ; then
|
||||
echo "Error: missing required option -d"
|
||||
exit 1
|
||||
fi
|
||||
|
|
@ -512,12 +562,30 @@ if [ -z "$BAY" ] ; then
|
|||
BAY=`awk "\\$1 == \"slot\" {print \\$2; exit}" $CONFIG`
|
||||
fi
|
||||
|
||||
TOPOLOGY=${TOPOLOGY:-sas_direct}
|
||||
|
||||
# Should we create /dev/by-enclosure symlinks?
|
||||
if [ "$ENCLOSURE_MODE" = "yes" -a "$TOPOLOGY" = "sas_direct" ] ; then
|
||||
ID_ENCLOSURE=$(enclosure_handler)
|
||||
if [ -z "$ID_ENCLOSURE" ] ; then
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# Just create the symlinks to the enclosure devices and then exit.
|
||||
ENCLOSURE_PREFIX=$(awk '/enclosure_symlinks_prefix/{print $2}' $CONFIG)
|
||||
if [ -z "$ENCLOSURE_PREFIX" ] ; then
|
||||
ENCLOSURE_PREFIX="enc"
|
||||
fi
|
||||
echo "ID_ENCLOSURE=$ID_ENCLOSURE"
|
||||
echo "ID_ENCLOSURE_PATH=by-enclosure/$ENCLOSURE_PREFIX-$ID_ENCLOSURE"
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# First check if an alias was defined for this device.
|
||||
ID_VDEV=`alias_handler`
|
||||
|
||||
if [ -z "$ID_VDEV" ] ; then
|
||||
BAY=${BAY:-bay}
|
||||
TOPOLOGY=${TOPOLOGY:-sas_direct}
|
||||
case $TOPOLOGY in
|
||||
sas_direct|sas_switch)
|
||||
ID_VDEV=`sas_handler`
|
||||
|
|
|
|||
|
|
@ -2,6 +2,9 @@ multipath no
|
|||
topology sas_direct
|
||||
phys_per_port 4
|
||||
|
||||
# Additionally create /dev/by-enclousure/ symlinks for enclosure devices
|
||||
enclosure_symlinks yes
|
||||
|
||||
# PCI_ID HBA PORT CHANNEL NAME
|
||||
channel 85:00.0 1 A
|
||||
channel 85:00.0 0 B
|
||||
|
|
|
|||
|
|
@ -38,6 +38,19 @@ defined by udev. This may be an absolute path or the base filename.
|
|||
Maps a physical path to a channel name (typically representing a single
|
||||
disk enclosure).
|
||||
|
||||
.TP
|
||||
\fIenclosure_symlinks\fR <yes|no>
|
||||
Additionally create /dev/by-enclosure symlinks to the disk enclosure
|
||||
sg devices using the naming scheme from from vdev_id.conf.
|
||||
\fIenclosure_symlinks\fR is only allowed for sas_direct mode.
|
||||
.TP
|
||||
\fIenclosure_symlinks_prefix\fR <prefix>
|
||||
Specify the prefix for the enclosure symlinks in the form of:
|
||||
|
||||
/dev/by-enclosure/<prefix>-<channel><num>
|
||||
|
||||
Defaults to "enc" if not specified.
|
||||
.TP
|
||||
\fIpci_slot\fR - specifies the PCI SLOT of the HBA
|
||||
hosting the disk enclosure being mapped, as found in the output of
|
||||
.BR lspci (8).
|
||||
|
|
@ -169,6 +182,27 @@ definitions - one per physical path.
|
|||
channel 86:00.0 0 B
|
||||
.fi
|
||||
.P
|
||||
A configuration with enclosure_symlinks enabled.
|
||||
.P
|
||||
.nf
|
||||
multipath yes
|
||||
enclosure_symlinks yes
|
||||
|
||||
# PCI_ID HBA PORT CHANNEL NAME
|
||||
channel 05:00.0 1 U
|
||||
channel 05:00.0 0 L
|
||||
channel 06:00.0 1 U
|
||||
channel 06:00.0 0 L
|
||||
.fi
|
||||
In addition to the disks symlinks, this configuration will create:
|
||||
.P
|
||||
.nf
|
||||
/dev/by-enclosure/enc-L0
|
||||
/dev/by-enclosure/enc-L1
|
||||
/dev/by-enclosure/enc-U0
|
||||
/dev/by-enclosure/enc-U1
|
||||
.fi
|
||||
.P
|
||||
A configuration using device link aliases.
|
||||
.P
|
||||
.nf
|
||||
|
|
|
|||
|
|
@ -8,3 +8,7 @@ ENV{DEVTYPE}=="partition", IMPORT{program}="@udevdir@/vdev_id -d %k"
|
|||
KERNEL=="*[!0-9]", ENV{SUBSYSTEM}=="block", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}"
|
||||
KERNEL=="*[0-9]", ENV{SUBSYSTEM}=="block", ENV{DEVTYPE}=="partition", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}-part%n"
|
||||
KERNEL=="dm-[0-9]*", ENV{SUBSYSTEM}=="block", ENV{ID_VDEV}=="?*", SYMLINK+="$env{ID_VDEV_PATH}"
|
||||
|
||||
# Enclosure device symlink rules
|
||||
ENV{SUBSYSTEM}=="scsi_generic", IMPORT{program}="@udevdir@/vdev_id -e"
|
||||
ENV{SUBSYSTEM}=="scsi_generic", ENV{ID_ENCLOSURE}=="?*", SYMLINK+="$env{ID_ENCLOSURE_PATH}"
|
||||
|
|
|
|||
Loading…
Reference in New Issue