Autoconf selinux support

If libselinux is detected on your system at configure time link
against it.  This allows us to use a library call to detect if
selinux is enabled and if it is to pass the mount option:

  "context=\"system_u:object_r:file_t:s0"

For now this is required because none of the existing selinux
policies are aware of the zfs filesystem type.  Because of this
they do not properly enable xattr based labeling even though
zfs supports all of the required hooks.

Until distro's add zfs as a known xattr friendly fs type we
must use mntpoint labeling.  Alternately, end users could modify
their existing selinux policy with a little guidance.

Makefile.in

@@ -80,6 +80,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -210,6 +211,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

cmd/Makefile.in

@@ -65,6 +65,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -178,6 +179,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

cmd/zdb/Makefile.in

@@ -68,6 +68,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -180,6 +181,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

cmd/zfs/Makefile.in

@@ -68,6 +68,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -180,6 +181,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

cmd/zinject/Makefile.in

@@ -68,6 +68,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -180,6 +181,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

cmd/zpios/Makefile.in

@@ -68,6 +68,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -170,6 +171,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

cmd/zpool/Makefile.in

@@ -68,6 +68,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -181,6 +182,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

cmd/zpool_id/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -163,6 +164,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

cmd/zpool_layout/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -163,6 +164,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

cmd/ztest/Makefile.in

@@ -68,6 +68,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -180,6 +181,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

config/user-selinux.m4

@@ -0,0 +1,36 @@
+dnl #
+dnl # Check to see if the selinux libraries are available.  If they
+dnl # are then they will be consulted during mount to determine if
+dnl # selinux is enabled or disabled.
+dnl #
+AC_DEFUN([ZFS_AC_CONFIG_USER_LIBSELINUX], [
+	AC_ARG_WITH([selinux],
+		[AS_HELP_STRING([--with-selinux],
+		[support selinux @<:@default=check@:>@])],
+		[],
+		[with_selinux=check])
+
+	LIBSELINUX=
+	AS_IF([test "x$with_selinux" != xno], [
+		AC_CHECK_HEADER([selinux/selinux.h], [
+			AC_CHECK_LIB([selinux], [is_selinux_enabled], [
+				AC_SUBST([LIBSELINUX], ["-lselinux"])
+				AC_DEFINE([HAVE_LIBSELINUX], 1,
+					[Define if you have selinux])
+			], [
+				AS_IF([test "x$with_selinux" != xcheck],
+					[AC_MSG_FAILURE(
+					[--with-selinux given but unavailable])
+				])
+			])
+		], [
+			AS_IF([test "x$with_selinux" != xcheck],
+				[AC_MSG_FAILURE(
+				[--with-selinux given but unavailable])
+			])
+		])
+	], [
+		AC_MSG_CHECKING([for selinux support])
+		AC_MSG_RESULT([no])
+	])
+])

config/user.m4

@@ -8,6 +8,7 @@ AC_DEFUN([ZFS_AC_CONFIG_USER], [
 	ZFS_AC_CONFIG_USER_ZLIB
 	ZFS_AC_CONFIG_USER_LIBUUID
 	ZFS_AC_CONFIG_USER_LIBBLKID
+	ZFS_AC_CONFIG_USER_LIBSELINUX
 	ZFS_AC_CONFIG_USER_FRAME_LARGER_THAN
 	ZFS_AC_CONFIG_USER_STACK_GUARD
 ])

configure

@@ -794,6 +794,7 @@ CONFIG_KERNEL_TRUE
 CONFIG_USER_FALSE
 CONFIG_USER_TRUE
 FRAME_LARGER_THAN
+LIBSELINUX
 LIBBLKID
 LIBUUID
 ZLIB
@@ -972,6 +973,7 @@ with_linux_obj
 with_spl
 with_spl_obj
 with_blkid
+with_selinux
 enable_debug
 '
       ac_precious_vars='build_alias
@@ -1639,6 +1641,7 @@ Optional Packages:
   --with-spl=PATH         Path to spl source
   --with-spl-obj=PATH     Path to spl build objects
   --with-blkid            support blkid caching [default=check]
+  --with-selinux          support selinux [default=check]
 
 Some influential environment variables:
   CC          C compiler command
@@ -4817,13 +4820,13 @@ if test "${lt_cv_nm_interface+set}" = set; then
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:4820: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:4823: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:4823: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:4826: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:4826: output\"" >&5)
+  (eval echo "\"\$as_me:4829: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -6029,7 +6032,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 6032 "configure"' > conftest.$ac_ext
+  echo '#line 6035 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -7882,11 +7885,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7885: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7888: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7889: \$? = $ac_status" >&5
+   echo "$as_me:7892: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -8221,11 +8224,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8224: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8227: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8228: \$? = $ac_status" >&5
+   echo "$as_me:8231: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -8326,11 +8329,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8329: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8332: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8333: \$? = $ac_status" >&5
+   echo "$as_me:8336: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -8381,11 +8384,11 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8384: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8387: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8388: \$? = $ac_status" >&5
+   echo "$as_me:8391: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -11184,7 +11187,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11187 "configure"
+#line 11190 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11280,7 +11283,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11283 "configure"
+#line 11286 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -14979,6 +14982,268 @@ fi
 
 
 
+
+# Check whether --with-selinux was given.
+if test "${with_selinux+set}" = set; then
+  withval=$with_selinux;
+else
+  with_selinux=check
+fi
+
+
+	LIBSELINUX=
+	if test "x$with_selinux" != xno; then
+
+		if test "${ac_cv_header_selinux_selinux_h+set}" = set; then
+  { $as_echo "$as_me:$LINENO: checking for selinux/selinux.h" >&5
+$as_echo_n "checking for selinux/selinux.h... " >&6; }
+if test "${ac_cv_header_selinux_selinux_h+set}" = set; then
+  $as_echo_n "(cached) " >&6
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_selinux_selinux_h" >&5
+$as_echo "$ac_cv_header_selinux_selinux_h" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:$LINENO: checking selinux/selinux.h usability" >&5
+$as_echo_n "checking selinux/selinux.h usability... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <selinux/selinux.h>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_header_compiler=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:$LINENO: checking selinux/selinux.h presence" >&5
+$as_echo_n "checking selinux/selinux.h presence... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <selinux/selinux.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  ac_header_preproc=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: proceeding with the preprocessor's result" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: proceeding with the preprocessor's result" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: in the future, the compiler will take precedence" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: in the future, the compiler will take precedence" >&2;}
+
+    ;;
+esac
+{ $as_echo "$as_me:$LINENO: checking for selinux/selinux.h" >&5
+$as_echo_n "checking for selinux/selinux.h... " >&6; }
+if test "${ac_cv_header_selinux_selinux_h+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_header_selinux_selinux_h=$ac_header_preproc
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_selinux_selinux_h" >&5
+$as_echo "$ac_cv_header_selinux_selinux_h" >&6; }
+
+fi
+if test "x$ac_cv_header_selinux_selinux_h" = x""yes; then
+
+			{ $as_echo "$as_me:$LINENO: checking for is_selinux_enabled in -lselinux" >&5
+$as_echo_n "checking for is_selinux_enabled in -lselinux... " >&6; }
+if test "${ac_cv_lib_selinux_is_selinux_enabled+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lselinux  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char is_selinux_enabled ();
+int
+main ()
+{
+return is_selinux_enabled ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_lib_selinux_is_selinux_enabled=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_lib_selinux_is_selinux_enabled=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_selinux_is_selinux_enabled" >&5
+$as_echo "$ac_cv_lib_selinux_is_selinux_enabled" >&6; }
+if test "x$ac_cv_lib_selinux_is_selinux_enabled" = x""yes; then
+
+				LIBSELINUX="-lselinux"
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LIBSELINUX 1
+_ACEOF
+
+
+else
+
+				if test "x$with_selinux" != xcheck; then
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: --with-selinux given but unavailable
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: --with-selinux given but unavailable
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }; }
+
+fi
+
+
+fi
+
+
+else
+
+			if test "x$with_selinux" != xcheck; then
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: --with-selinux given but unavailable
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: --with-selinux given but unavailable
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }; }
+
+fi
+
+
+fi
+
+
+
+else
+
+		{ $as_echo "$as_me:$LINENO: checking for selinux support" >&5
+$as_echo_n "checking for selinux support... " >&6; }
+		{ $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+
+
+
 	{ $as_echo "$as_me:$LINENO: checking for -Wframe-larger-than=<size> support" >&5
 $as_echo_n "checking for -Wframe-larger-than=<size> support... " >&6; }
 
@@ -18314,6 +18579,268 @@ fi
 
 
 
+
+# Check whether --with-selinux was given.
+if test "${with_selinux+set}" = set; then
+  withval=$with_selinux;
+else
+  with_selinux=check
+fi
+
+
+	LIBSELINUX=
+	if test "x$with_selinux" != xno; then
+
+		if test "${ac_cv_header_selinux_selinux_h+set}" = set; then
+  { $as_echo "$as_me:$LINENO: checking for selinux/selinux.h" >&5
+$as_echo_n "checking for selinux/selinux.h... " >&6; }
+if test "${ac_cv_header_selinux_selinux_h+set}" = set; then
+  $as_echo_n "(cached) " >&6
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_selinux_selinux_h" >&5
+$as_echo "$ac_cv_header_selinux_selinux_h" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:$LINENO: checking selinux/selinux.h usability" >&5
+$as_echo_n "checking selinux/selinux.h usability... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <selinux/selinux.h>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then
+  ac_header_compiler=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:$LINENO: checking selinux/selinux.h presence" >&5
+$as_echo_n "checking selinux/selinux.h presence... " >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <selinux/selinux.h>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then
+  ac_header_preproc=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: proceeding with the preprocessor's result" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: proceeding with the preprocessor's result" >&2;}
+    { $as_echo "$as_me:$LINENO: WARNING: selinux/selinux.h: in the future, the compiler will take precedence" >&5
+$as_echo "$as_me: WARNING: selinux/selinux.h: in the future, the compiler will take precedence" >&2;}
+
+    ;;
+esac
+{ $as_echo "$as_me:$LINENO: checking for selinux/selinux.h" >&5
+$as_echo_n "checking for selinux/selinux.h... " >&6; }
+if test "${ac_cv_header_selinux_selinux_h+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_header_selinux_selinux_h=$ac_header_preproc
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_selinux_selinux_h" >&5
+$as_echo "$ac_cv_header_selinux_selinux_h" >&6; }
+
+fi
+if test "x$ac_cv_header_selinux_selinux_h" = x""yes; then
+
+			{ $as_echo "$as_me:$LINENO: checking for is_selinux_enabled in -lselinux" >&5
+$as_echo_n "checking for is_selinux_enabled in -lselinux... " >&6; }
+if test "${ac_cv_lib_selinux_is_selinux_enabled+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lselinux  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char is_selinux_enabled ();
+int
+main ()
+{
+return is_selinux_enabled ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
+$as_echo "$ac_try_echo") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then
+  ac_cv_lib_selinux_is_selinux_enabled=yes
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_cv_lib_selinux_is_selinux_enabled=no
+fi
+
+rm -rf conftest.dSYM
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_selinux_is_selinux_enabled" >&5
+$as_echo "$ac_cv_lib_selinux_is_selinux_enabled" >&6; }
+if test "x$ac_cv_lib_selinux_is_selinux_enabled" = x""yes; then
+
+				LIBSELINUX="-lselinux"
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LIBSELINUX 1
+_ACEOF
+
+
+else
+
+				if test "x$with_selinux" != xcheck; then
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: --with-selinux given but unavailable
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: --with-selinux given but unavailable
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }; }
+
+fi
+
+
+fi
+
+
+else
+
+			if test "x$with_selinux" != xcheck; then
+  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ { $as_echo "$as_me:$LINENO: error: --with-selinux given but unavailable
+See \`config.log' for more details." >&5
+$as_echo "$as_me: error: --with-selinux given but unavailable
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }; }
+
+fi
+
+
+fi
+
+
+
+else
+
+		{ $as_echo "$as_me:$LINENO: checking for selinux support" >&5
+$as_echo_n "checking for selinux support... " >&6; }
+		{ $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+
+
+
 	{ $as_echo "$as_me:$LINENO: checking for -Wframe-larger-than=<size> support" >&5
 $as_echo_n "checking for -Wframe-larger-than=<size> support... " >&6; }
 

etc/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -163,6 +164,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

include/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -222,6 +223,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

include/sys/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -343,6 +344,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

include/sys/fm/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -207,6 +208,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

include/sys/fm/fs/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -167,6 +168,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

include/sys/fs/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -167,6 +168,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/Makefile.in

@@ -65,6 +65,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -178,6 +179,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libavl/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -190,6 +191,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libefi/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -190,6 +191,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libnvpair/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -191,6 +192,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -241,6 +242,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/asm-generic/Makefile.in

@@ -66,6 +66,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -139,6 +140,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/asm-i386/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -143,6 +144,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/asm-x86_64/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -143,6 +144,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/include/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -203,6 +204,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/include/ia32/Makefile.in

@@ -65,6 +65,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -178,6 +179,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/include/ia32/sys/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -165,6 +166,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/include/rpc/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -165,6 +166,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/include/sys/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -203,6 +204,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/include/sys/dktp/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -165,6 +166,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/include/sys/sysevent/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -165,6 +166,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libspl/include/util/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -165,6 +166,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libunicode/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -190,6 +191,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libuutil/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -192,6 +193,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

lib/libzfs/Makefile.am

@@ -6,7 +6,7 @@ DEFAULT_INCLUDES += \
 
 lib_LTLIBRARIES = libzfs.la
 
-libzfs_la_LDFLAGS = -lm
+libzfs_la_LDFLAGS = -lm $(LIBSELINUX)
 
 libzfs_la_LIBADD = \
 	$(top_builddir)/lib/libefi/libefi.la \

lib/libzfs/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -197,6 +198,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@
@@ -314,7 +316,7 @@ AM_CFLAGS = -Wall -Wstrict-prototypes -fno-strict-aliasing \
 	-D_POSIX_PTHREAD_SEMANTICS -D_FILE_OFFSET_BITS=64 \
 	-D_LARGEFILE64_SOURCE -DTEXT_DOMAIN=\"zfs-linux-user\"
 lib_LTLIBRARIES = libzfs.la
-libzfs_la_LDFLAGS = -lm
+libzfs_la_LDFLAGS = -lm $(LIBSELINUX)
 libzfs_la_LIBADD = \
 	$(top_builddir)/lib/libefi/libefi.la \
 	$(top_builddir)/lib/libuutil/libuutil.la

lib/libzfs/libzfs_mount.c

@@ -72,6 +72,9 @@
 #include <sys/mntent.h>
 #include <sys/mount.h>
 #include <sys/stat.h>
+#ifdef HAVE_LIBSELINUX
+#include <selinux/selinux.h>
+#endif /* HAVE_LIBSELINUX */
 
 #include <libzfs.h>
 
@@ -277,6 +280,12 @@ zfs_mount(zfs_handle_t *zhp, const char *options, int flags)
 	if (zpool_get_prop_int(zhp->zpool_hdl, ZPOOL_PROP_READONLY, NULL))
 		flags |= MS_RDONLY;
 
+#ifdef HAVE_LIBSELINUX
+	if (is_selinux_enabled())
+		(void) strlcat(mntopts, ",context=\"system_u:"
+		    "object_r:file_t:s0\"", sizeof (mntopts));
+#endif /* HAVE_LIBSELINUX */
+
 	if (!zfs_is_mountable(zhp, mountpoint, sizeof (mountpoint), NULL))
 		return (0);
 

lib/libzpool/Makefile.in

@@ -67,6 +67,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -211,6 +212,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

man/Makefile.in

@@ -65,6 +65,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -178,6 +179,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

man/man8/Makefile.in

@@ -65,6 +65,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -163,6 +164,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

scripts/Makefile.in

@@ -66,6 +66,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -203,6 +204,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

scripts/zpios-profile/Makefile.in

@@ -66,6 +66,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -163,6 +164,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

scripts/zpios-test/Makefile.in

@@ -66,6 +66,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -163,6 +164,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

scripts/zpool-config/Makefile.in

@@ -66,6 +66,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -163,6 +164,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

scripts/zpool-layout/Makefile.in

@@ -66,6 +66,7 @@ am__aclocal_m4_deps =  \
 	$(top_srcdir)/config/user-libshare.m4 \
 	$(top_srcdir)/config/user-libuuid.m4 \
 	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
 	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
 	$(top_srcdir)/config/zfs-build.m4 \
 	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
@@ -163,6 +164,7 @@ LDFLAGS = @LDFLAGS@
 LIBBLKID = @LIBBLKID@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
 LIBTOOL = @LIBTOOL@
 LIBUUID = @LIBUUID@
 LINUX = @LINUX@

zfs_config.h.in

@@ -84,6 +84,9 @@
 /* Define if you have libblkid */
 #undef HAVE_LIBBLKID
 
+/* Define if you have selinux */
+#undef HAVE_LIBSELINUX
+
 /* Define to 1 if 'libshare' library available */
 #undef HAVE_LIBSHARE