Real disk partitioning now enabled in test suite for Linux

When using real devices, specify DISKS="sdb sdc sdd" opposed to
/dev/sdb in zfs-tests.sh - otherwise errors with directory names and
disk names registering as "/dev//dev/sdb" for some tests.  The same
goes for mpath: DISK="mpatha mpathad mpathb"

Expected Usage:

$ DISKS="sdb sdc sdd" zfs-tests.sh

SLICE_PREFIX is now set as "p" for a loop device (ie loop0p2) or
"" for a real device (ie sdb2), or either for multipath devices
(ie mpatha1 or mpath1p1) instead of only "p" by default.  Note that
kpartx partitioning is not currently supported in this patch
(ie "partx") and may need to be disabled on Debian distributions.
Functions added for determining test directory (/dev or /dev/mapper)
as well as slice prefix are determined and exported mostly in the cfg
file of each test group directory.

Currently zpools cannot be created on whole mpath devices that have
been partitioned. In order to fix this tests have either been revised
to use a partition instead, or if there is a size constraint and the
pool needs to be created on the whole disk, partitions are then deleted
if the device is a multipath device.  This functionality is added to
default_cleanup() or to individual cleanup scripts if a non-default
cleanup method is used.

The max partitions is currently set at 8 to account for all of the
tests thus far.

Patch changes are generally encompassed in "if is_linux" construct.

Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Reviewed-by: John Salinas <John.Salinas@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Closes #4447
Closes #4964
Closes #5074

config/user-commands.m4

@@ -99,9 +99,11 @@ AC_DEFUN([ZFS_AC_CONFIG_USER_COMMANDS_LINUX], [
 	AC_PATH_TOOL(COMPRESS, gzip, "")
 	AC_PATH_TOOL(FORMAT, parted, "")
 	AC_PATH_TOOL(LOCKFS, lsof, "")
+	AC_PATH_TOOL(LSBLK, lsblk, "")
 	AC_PATH_TOOL(MODUNLOAD, rmmod, "")
 	AC_PATH_TOOL(NEWFS, mke2fs, "")
 	AC_PATH_TOOL(PFEXEC, sudo, "")
+	AC_PATH_TOOL(READLINK, readlink, "")
 	AC_PATH_TOOL(SHARE, exportfs, "")
 	AC_PATH_TOOL(SWAP, swapon, "")
 	AC_PATH_TOOL(SWAPADD, swapon, "")

tests/zfs-tests/include/commands.cfg.in

@@ -52,6 +52,7 @@ export LOCKFS="@LOCKFS@"
 export LOFIADM="@LOFIADM@"
 export LOGNAME="@LOGNAME@"
 export LS="@LS@"
+export LSBLK="@LSBLK@"
 export MD5SUM="@MD5SUM@"
 export MKDIR="@MKDIR@"
 export MKNOD="@MKNOD@"
@@ -75,6 +76,7 @@ export PRTVTOC="@PRTVTOC@"
 export PS="@PS@"
 export PSRINFO="@PSRINFO@"
 export PYTHON="@PYTHON@"
+export READLINK="@READLINK@"
 export REBOOT="@REBOOT@"
 export RM="@RM@"
 export RMDIR="@RMDIR@"

tests/zfs-tests/include/default.cfg.in

@@ -171,6 +171,8 @@ for i in $ZFS_ALL_VERSIONS; do
 	eval 'export ZFS_VERSION_$i="v${i}-fs"'
 done
 
+export MAX_PARTITIONS=8
+
 if is_linux; then
 	unpack_opts="--sparse -xf"
 	pack_opts="--sparse -cf"
@@ -180,8 +182,8 @@ if is_linux; then
 
 	ZVOL_DEVDIR="/dev/zvol"
 	ZVOL_RDEVDIR="/dev/zvol"
-	DEV_DSKDIR="/dev"
 	DEV_RDSKDIR="/dev"
+	DEV_MPATHDIR="/dev/mapper"
 
 	NEWFS_DEFAULT_FS="ext2"
 else
@@ -199,4 +201,4 @@ else
 	NEWFS_DEFAULT_FS="ufs"
 fi
 export unpack_opts pack_opts verbose unpack_preserve pack_preserve \
-       ZVOL_DEVDIR ZVOL_RDEVDIR NEWFS_DEFAULT_FS DEV_DSKDIR DEV_RDSKDIR
+       ZVOL_DEVDIR ZVOL_RDEVDIR NEWFS_DEFAULT_FS DEV_RDSKDIR DEV_MPATHDIR

tests/zfs-tests/include/libtest.shlib

@@ -456,6 +456,11 @@ function default_cleanup_noexit
 
 	[[ -d $TESTDIR ]] && \
 		log_must $RM -rf $TESTDIR
+
+	disk1=${DISKS%% *}
+	if is_mpath_device $disk1; then
+		delete_partitions
+	fi
 }
 
 
@@ -733,6 +738,69 @@ function set_partition #<slice_num> <slice_start> <size_plus_units>  <whole_disk
 	return 0
 }
 
+#
+# Delete all partitions on all disks - this is specifically for the use of multipath
+# devices which currently can only be used in the test suite as raw/un-partitioned
+# devices (ie a zpool cannot be created on a whole mpath device that has partitions)
+#
+function delete_partitions
+{
+	typeset -i j=1
+
+	if [[ -z $DISK_ARRAY_NUM ]]; then
+		DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+	fi
+	if [[ -z $DISKSARRAY ]]; then
+		DISKSARRAY=$DISKS
+	fi
+
+	if is_linux; then
+		if (( $DISK_ARRAY_NUM == 1 )); then
+			while ((j < MAX_PARTITIONS)); do
+				$FORMAT $DEV_DSKDIR/$DISK -s rm $j > /dev/null 2>&1
+				if (( $? == 1 )); then
+					$LSBLK | $EGREP ${DISK}${SLICE_PREFIX}${j} > /dev/null
+						if (( $? == 1 )); then
+							log_note "Partitions for $DISK should be deleted"
+						else
+							log_fail "Partition for ${DISK}${SLICE_PREFIX}${j} not deleted"
+						fi
+						return 0
+				else
+					$LSBLK | $EGREP ${DISK}${SLICE_PREFIX}${j} > /dev/null
+						if (( $? == 0 )); then
+							log_fail "Partition for ${DISK}${SLICE_PREFIX}${j} not deleted"
+						fi
+				fi
+				((j = j+1))
+			done
+		else
+			for disk in `$ECHO $DISKSARRAY`; do
+				while ((j < MAX_PARTITIONS)); do
+					$FORMAT $DEV_DSKDIR/$disk -s rm $j > /dev/null 2>&1
+					if (( $? == 1 )); then
+						$LSBLK | $EGREP ${disk}${SLICE_PREFIX}${j} > /dev/null
+						if (( $? == 1 )); then
+							log_note "Partitions for $disk should be deleted"
+						else
+							log_fail "Partition for ${disk}${SLICE_PREFIX}${j} not deleted"
+						fi
+						j=7
+					else
+						$LSBLK | $EGREP ${disk}${SLICE_PREFIX}${j} > /dev/null
+						if (( $? == 0 )); then
+							log_fail "Partition for ${disk}${SLICE_PREFIX}${j} not deleted"
+						fi
+					fi
+					((j = j+1))
+				done
+				j=1
+			done
+		fi
+	fi
+	return 0
+}
+
 #
 # Get the end cyl of the given slice
 #
@@ -2482,6 +2550,113 @@ function is_physical_device #device
 	fi
 }
 
+#
+# Check if the given device is a real device (ie SCSI device)
+#
+function is_real_device #disk
+{
+	typeset disk=$1
+	[[ -z $disk ]] && log_fail "No argument for disk given."
+
+       if is_linux; then
+		$LSBLK $DEV_RDSKDIR/$disk -o TYPE | $EGREP disk > /dev/null 2>&1
+		return $?
+       fi
+}
+
+#
+# Check if the given device is a loop device
+#
+function is_loop_device #disk
+{
+	typeset disk=$1
+	[[ -z $disk ]] && log_fail "No argument for disk given."
+
+       if is_linux; then
+		$LSBLK $DEV_RDSKDIR/$disk -o TYPE | $EGREP loop > /dev/null 2>&1
+		return $?
+       fi
+}
+
+#
+# Check if the given device is a multipath device and if there is a sybolic
+# link to a device mapper and to a disk
+# Currently no support for dm devices alone without multipath
+#
+function is_mpath_device #disk
+{
+	typeset disk=$1
+	[[ -z $disk ]] && log_fail "No argument for disk given."
+
+	if is_linux; then
+		$LSBLK $DEV_MPATHDIR/$disk -o TYPE | $EGREP mpath > /dev/null 2>&1
+		if (($? == 0)); then
+			$READLINK $DEV_MPATHDIR/$disk > /dev/null 2>&1
+			return $?
+		else
+			return $?
+		fi
+	fi
+}
+
+# Set the slice prefix for disk partitioning depending
+# on whether the device is a real, multipath, or loop device.
+# Currently all disks have to be of the same type, so only
+# checks first disk to determine slice prefix.
+#
+function set_slice_prefix
+{
+	typeset disk
+	typeset -i i=0
+
+	if is_linux; then
+		while (( i < $DISK_ARRAY_NUM )); do
+			disk="$($ECHO $DISKS | $NAWK '{print $(i + 1)}')"
+			if ( is_mpath_device $disk ) && [[ -z $($ECHO $disk | awk 'substr($1,18,1)\
+			     ~ /^[[:digit:]]+$/') ]] || ( is_real_device $disk ); then
+				export SLICE_PREFIX=""
+				return 0
+			elif ( is_mpath_device $disk || is_loop_device $disk ); then
+				export SLICE_PREFIX="p"
+				return 0
+			else
+				log_fail "$disk not supported for partitioning."
+			fi
+			(( i = i + 1))
+		done
+	fi
+}
+
+#
+# Set the directory path of the listed devices in $DISK_ARRAY_NUM
+# Currently all disks have to be of the same type, so only
+# checks first disk to determine device directory
+# default = /dev (linux)
+# real disk = /dev (linux)
+# multipath device = /dev/mapper (linux)
+#
+function set_device_dir
+{
+	typeset disk
+	typeset -i i=0
+
+	if is_linux; then
+		while (( i < $DISK_ARRAY_NUM )); do
+			disk="$($ECHO $DISKS | $NAWK '{print $(i + 1)}')"
+			if is_mpath_device $disk; then
+				export DEV_DSKDIR=$DEV_MPATHDIR
+				return 0
+			else
+				export DEV_DSKDIR=$DEV_RDSKDIR
+				return 0
+			fi
+			(( i = i + 1))
+		done
+	else
+		export DEV_DSKDIR=$DEV_RDSKDIR
+	fi
+}
+
 #
 # Get the directory path of given device
 #

tests/zfs-tests/tests/functional/cache/cache.cfg

@@ -30,12 +30,12 @@
 
 . $STF_SUITE/include/libtest.shlib
 
+export DISK_ARRAY_NUM=0
+
 function set_disks
 {
 	set -A disk_array $(find_disks $DISKS)
 
-	typeset -i DISK_ARRAY_NUM=0
-
 	if (( ${#disk_array[*]} <= 1 )); then
 		export DISK=${DISKS%% *}
 	else
@@ -58,6 +58,7 @@ function set_disks
 }
 
 set_disks
+set_device_dir
 
 export SIZE=64M
 

tests/zfs-tests/tests/functional/cache/setup.ksh

@@ -34,7 +34,7 @@
 
 verify_runnable "global"
 
-if ! $(is_physical_device $LDEV) ; then
+if ! is_physical_device $LDEV; then
 	log_unsupported "Only physical disk could be cache device"
 fi
 

tests/zfs-tests/tests/functional/clean_mirror/cleanup.ksh

@@ -38,6 +38,12 @@ $DF -F zfs -h | $GREP "$TESTFS " >/dev/null
 [[ $? == 0 ]] && log_must $ZFS umount -f $TESTDIR
 destroy_pool $TESTPOOL
 
+if is_mpath_device $MIRROR_PRIMARY; then
+	$FORMAT $DEV_DSKDIR/$MIRROR_PRIMARY -s rm 1
+fi
+if is_mpath_device $MIRROR_SECONDARY; then
+	$FORMAT $DEV_DSKDIR/$MIRROR_SECONDARY -s rm 1
+fi
 # recreate and destroy a zpool over the disks to restore the partitions to
 # normal
 if [[ -n $SINGLE_DISK ]]; then

tests/zfs-tests/tests/functional/clean_mirror/default.cfg

@@ -44,9 +44,23 @@ if [[ -z $MIRROR_SECONDARY ]]; then
 	SIDE_SECONDARY_PART=1
 
 	if is_linux; then
+		if is_mpath_device $SINGLE_DISK; then
+			export DEV_DSKDIR=$DEV_MPATHDIR
+		else
+			export DEV_DSKDIR=$DEV_RDSKDIR
+		fi
+		if ( is_mpath_device $SINGLE_DISK ) && [[ -z $($ECHO $SINGLE_DISK | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $SINGLE_DISK ); then
+			SIDE_PRIMARY=${SINGLE_DISK}1
+			SIDE_SECONDARY=${SINGLE_DISK}2
+		elif ( is_mpath_device $SINGLE_DISK || is_loop_device $SINGLE_DISK ); then
 			SIDE_PRIMARY=${SINGLE_DISK}p1
 			SIDE_SECONDARY=${SINGLE_DISK}p2
 		else
+			log_fail "$SINGLE_DISK not supported for partitioning."
+		fi
+	else
+		export DEV_DSKDIR="/dev"
 		SIDE_PRIMARY=${SINGLE_DISK}s${SIDE_PRIMARY_PART}
 		SIDE_SECONDARY=${SINGLE_DISK}s${SIDE_SECONDARY_PART}
 	fi
@@ -54,9 +68,30 @@ else
 	SIDE_PRIMARY_PART=0
 	SIDE_SECONDARY_PART=0
 	if is_linux; then
+		if is_mpath_device $MIRROR_PRIMARY; then
+			export DEV_DSKDIR=$DEV_MPATHDIR
+		else
+			export DEV_DSKDIR=$DEV_RDSKDIR
+		fi
+		if ( is_mpath_device $MIRROR_PRIMARY ) && [[ -z $($ECHO $MIRROR_PRIMARY | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $MIRROR_PRIMARY ); then
+			SIDE_PRIMARY=${MIRROR_PRIMARY}1
+		elif ( is_mpath_device $MIRROR_PRIMARY || is_loop_device $MIRROR_PRIMARY ); then
 			SIDE_PRIMARY=${MIRROR_PRIMARY}p1
+		else
+			log_fail "$MIRROR_PRIMARY not supported for partitioning."
+		fi
+		if ( is_mpath_device $MIRROR_SECONDARY ) && [[ -z $($ECHO $MIRROR_SECONDARY | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $MIRROR_SECONDARY ); then
+			SIDE_SECONDARY=${MIRROR_SECONDARY}1
+		elif ( is_mpath_device $MIRROR_SECONDARY || is_loop_device $MIRROR_SECONDARY ); then
 			SIDE_SECONDARY=${MIRROR_SECONDARY}p1
 		else
+			log_fail "$MIRROR_SECONDARY not supported for partitioning."
+		fi
+
+	else
+		export DEV_DSKDIR="/dev"
 		SIDE_PRIMARY=${MIRROR_PRIMARY}s${SIDE_PRIMARY_PART}
 		SIDE_SECONDARY=${MIRROR_SECONDARY}s${SIDE_SECONDARY_PART}
 	fi

tests/zfs-tests/tests/functional/clean_mirror/setup.ksh

@@ -34,7 +34,7 @@
 
 verify_runnable "global"
 
-if ! $(is_physical_device $DISKS) ; then
+if ! is_physical_device $DISKS; then
 	log_unsupported "This directory cannot be run on raw files."
 fi
 

tests/zfs-tests/tests/functional/cli_root/zpool_add/cleanup.ksh

@@ -32,6 +32,11 @@
 . $STF_SUITE/include/libtest.shlib
 . $STF_SUITE/tests/functional/cli_root/zpool_add/zpool_add.kshlib
 
+DISK=${DISKS%% *}
+if is_mpath_device $DISK; then
+        delete_partitions
+fi
+
 cleanup_devices $DISKS
 
 log_pass

tests/zfs-tests/tests/functional/cli_root/zpool_add/setup.ksh

@@ -38,6 +38,11 @@ if ! $(is_physical_device $DISKS) ; then
 	log_unsupported "This directory cannot be run on raw files."
 fi
 
+disk1=${DISKS%% *}
+if is_mpath_device $disk1; then
+        delete_partitions
+fi
+
 if [[ -n $DISK ]]; then
 	#
         # Use 'zpool create' to clean up the infomation in

tests/zfs-tests/tests/functional/cli_root/zpool_add/zpool_add.cfg

@@ -72,7 +72,8 @@ export SIZE="150m"
 export SIZE1="250m"
 
 if is_linux; then
-	export SLICE_PREFIX="p"
+	set_device_dir
+	set_slice_prefix
 	export SLICE0=1
 	export SLICE1=2
 	export SLICE3=4
@@ -80,6 +81,7 @@ if is_linux; then
 	export SLICE5=6
 	export SLICE6=7
 else
+	export DEV_DSKDIR="/dev"
 	export SLICE_PREFIX="s"
 	export SLICE0=0
 	export SLICE1=1

tests/zfs-tests/tests/functional/cli_root/zpool_create/setup.ksh

@@ -32,6 +32,13 @@
 . $STF_SUITE/include/libtest.shlib
 . $STF_SUITE/tests/functional/cli_root/zpool_create/zpool_create.shlib
 
+[[ -z $FORMAT ]] || \
+[[ -z $MKDIR ]] || \
+[[ -z $LSBLK ]] || \
+[[ -z $READLINK ]] || \
+[[ -z $TOUCH ]] && \
+	log_fail "Missing required commands"
+
 verify_runnable "global"
 
 if ! $(is_physical_device $DISKS) ; then

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create.cfg

@@ -41,6 +41,7 @@ function set_disks
 
 	if (( ${#disk_array[*]} <= 1 )); then
 		export DISK=${DISKS%% *}
+		export DISK_ARRAY_NUM=1
 	else
 		export DISK=""
 		typeset -i i=0
@@ -63,7 +64,8 @@ export SIZE="200m"
 export SIZE1="250m"
 
 if is_linux; then
-	export SLICE_PREFIX="p"
+	set_device_dir
+	set_slice_prefix
 	export SLICE0=1
 	export SLICE1=2
 	export SLICE2=3
@@ -72,6 +74,10 @@ if is_linux; then
 	export SLICE5=6
 	export SLICE6=7
 	export SLICE7=8
+	disk1=${DISKS%% *}
+	if is_mpath_device $disk1; then
+		delete_partitions
+	fi
 else
 	export SLICE_PREFIX="s"
 	export SLICE0=0

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create_003_pos.ksh

@@ -51,7 +51,7 @@ function cleanup
 
 tmpfile="/var/tmp/zpool_create_003.tmp$$"
 
-log_assert "'zpool create -n <pool> <vspec> ...' can display the configureation" \
+log_assert "'zpool create -n <pool> <vspec> ...' can display the configuration" \
         "without actually creating the pool."
 
 log_onexit cleanup
@@ -62,6 +62,11 @@ else
         disk=$DISK0
 fi
 
+DISK=${DISKS%% *}
+if is_mpath_device $DISK; then
+	partition_disk $SIZE $disk 1
+fi
+
 #
 # Make sure disk is clean before we use it
 #

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create_006_pos.ksh

@@ -26,6 +26,7 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/cli_root/zpool_create/zpool_create.shlib
 
 #
 # DESCRIPTION:

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create_021_pos.ksh

@@ -31,6 +31,7 @@
 
 . $STF_SUITE/include/libtest.shlib
 . $STF_SUITE/tests/functional/cli_root/zfs_create/zfs_create_common.kshlib
+. $STF_SUITE/tests/functional/cli_root/zpool_create/zpool_create.shlib
 
 #
 # DESCRIPTION:

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create_022_pos.ksh

@@ -31,6 +31,7 @@
 
 . $STF_SUITE/include/libtest.shlib
 . $STF_SUITE/tests/functional/cli_root/zfs_create/zfs_create_common.kshlib
+. $STF_SUITE/tests/functional/cli_root/zpool_create/zpool_create.shlib
 
 #
 # DESCRIPTION:

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create_features_001_pos.ksh

@@ -25,6 +25,7 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/cli_root/zpool_create/zpool_create.shlib
 
 ################################################################################
 #

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create_features_002_pos.ksh

@@ -25,6 +25,7 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/cli_root/zpool_create/zpool_create.shlib
 
 ################################################################################
 #

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create_features_003_pos.ksh

@@ -25,6 +25,7 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/cli_root/zpool_create/zpool_create.shlib
 
 ################################################################################
 #

tests/zfs-tests/tests/functional/cli_root/zpool_create/zpool_create_features_004_neg.ksh

@@ -25,6 +25,7 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/cli_root/zpool_create/zpool_create.shlib
 
 ################################################################################
 #

tests/zfs-tests/tests/functional/cli_root/zpool_destroy/zpool_destroy.cfg

@@ -31,7 +31,8 @@
 export DISK=${DISKS%% *}
 
 if is_linux; then
-	export SLICE_PREFIX="p"
+	set_device_dir
+	set_slice_prefix
 	export SLICE0=1
 	export SLICE1=2
 else

tests/zfs-tests/tests/functional/cli_root/zpool_export/Makefile.am

@@ -2,6 +2,7 @@ pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/cli_root/zpool_expo
 dist_pkgdata_SCRIPTS = \
 	setup.ksh \
 	cleanup.ksh \
+	zpool_export.cfg \
 	zpool_export_001_pos.ksh \
 	zpool_export_002_pos.ksh \
 	zpool_export_003_neg.ksh \

tests/zfs-tests/tests/functional/cli_root/zpool_export/setup.ksh

@@ -26,6 +26,7 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/cli_root/zpool_export/zpool_export.cfg
 
 DISK=${DISKS%% *}
 

tests/zfs-tests/tests/functional/cli_root/zpool_export/zpool_export.cfg

@@ -0,0 +1,59 @@
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
+# Use is subject to license terms.
+#
+
+#
+# Copyright (c) 2012, 2014 by Delphix. All rights reserved.
+#
+
+. $STF_SUITE/include/libtest.shlib
+
+export DISK_ARRAY_NUM=0
+export DISK_ARRAY_LIMIT=4
+export DISKSARRAY=""
+export VDEVS_NUM=32
+
+function set_disks
+{
+        typeset -a disk_array=($(find_disks $DISKS))
+
+	if (( ${#disk_array[*]} <= 1 )); then
+		export DISK=${DISKS%% *}
+	else
+		export DISK=""
+		typeset -i i=0
+		while (( i < ${#disk_array[*]} )); do
+			export DISK${i}="${disk_array[$i]}"
+			DISKSARRAY="$DISKSARRAY ${disk_array[$i]}"
+			(( i = i + 1 ))
+			(( i>$DISK_ARRAY_LIMIT )) && break
+		done
+		export DISK_ARRAY_NUM=$i
+		export DISKSARRAY
+	fi
+}
+
+set_disks
+set_device_dir

tests/zfs-tests/tests/functional/cli_root/zpool_export/zpool_export_001_pos.ksh

@@ -25,6 +25,7 @@
 # Use is subject to license terms.
 #
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/cli_root/zpool_export/zpool_export.cfg
 
 #
 # DESCRIPTION:

tests/zfs-tests/tests/functional/cli_root/zpool_import/cleanup.ksh

@@ -48,6 +48,10 @@ for dir in "$TESTDIR" "$TESTDIR1" "$DEVICE_DIR" ; do
 		log_must $RM -rf $dir
 done
 
+DISK=${DISKS%% *}
+if is_mpath_device $DISK; then
+	delete_partitions
+fi
 # recreate and destroy a zpool over the disks to restore the partitions to
 # normal
 case $DISK_COUNT in

tests/zfs-tests/tests/functional/cli_root/zpool_import/setup.ksh

@@ -68,8 +68,19 @@ fi
 log_must $ZFS create $TESTPOOL/$TESTFS
 log_must $ZFS set mountpoint=$TESTDIR $TESTPOOL/$TESTFS
 
+DISK2="$($ECHO $DISKS | $NAWK '{print $2}')"
+if is_mpath_device $DISK2; then
+	$ECHO "y" | $NEWFS -v $DEV_DSKDIR/$DISK2 >/dev/null 2>&1
+	(( $? != 0 )) &&
+		log_untested "Unable to setup a $NEWFS_DEFAULT_FS file system"
+
+	[[ ! -d $DEVICE_DIR ]] && \
+		log_must $MKDIR -p $DEVICE_DIR
+
+	log_must $MOUNT $DEV_DSKDIR/$DISK2 $DEVICE_DIR
+else
 	log_must set_partition 0 "" $FS_SIZE $ZFS_DISK2
-$ECHO "y" | $NEWFS -v $DEV_RDSKDIR/$ZFSSIDE_DISK2 >/dev/null 2>&1
+	$ECHO "y" | $NEWFS -v $DEV_DSKDIR/$ZFSSIDE_DISK2 >/dev/null 2>&1
 	(( $? != 0 )) &&
 		log_untested "Unable to setup a $NEWFS_DEFAULT_FS file system"
 
@@ -77,6 +88,7 @@ $ECHO "y" | $NEWFS -v $DEV_RDSKDIR/$ZFSSIDE_DISK2 >/dev/null 2>&1
 		log_must $MKDIR -p $DEVICE_DIR
 
 	log_must $MOUNT $DEV_DSKDIR/$ZFSSIDE_DISK2 $DEVICE_DIR
+fi
 
 i=0
 while (( i < $MAX_NUM )); do

tests/zfs-tests/tests/functional/cli_root/zpool_import/zpool_import.cfg

@@ -30,6 +30,8 @@
 
 . $STF_SUITE/include/libtest.shlib
 
+export DISKSARRAY=$DISKS
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
 typeset -a disk_array=($(find_disks $DISKS))
 case "${#disk_array[*]}" in
 0)
@@ -43,10 +45,24 @@ case "${#disk_array[*]}" in
 	if is_linux; then
 		DISK_COUNT=1
 		ZFS_DISK1=${disk_array[0]}
-		ZFSSIDE_DISK1=${ZFS_DISK1}p1
 		ZFS_DISK2=${disk_array[0]}
+		if is_mpath_device $ZFS_DISK1; then
+			export DEV_DSKDIR=$DEV_MPATHDIR
+		else
+			export DEV_DSKDIR=$DEV_RDSKDIR
+		fi
+		if ( is_mpath_device $ZFS_DISK1 ) && [[ -z $($ECHO $ZFS_DISK1 | awk 'substr($1,18,1)\
+                    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $ZFS_DISK1 ); then
+			ZFSSIDE_DISK1=${ZFS_DISK1}1
+			ZFSSIDE_DISK2=${ZFS_DISK2}2
+		elif ( is_mpath_device $ZFS_DISK1 || is_loop_device $ZFS_DISK1 ); then
+			ZFSSIDE_DISK1=${ZFS_DISK1}p1
 			ZFSSIDE_DISK2=${ZFS_DISK2}p2
 		else
+			log_fail "$ZFS_DISK1 not supported for partitioning."
+		fi
+	else
+		export DEV_DSKDIR="/dev"
 		DISK_COUNT=1
 		ZFS_DISK1=${disk_array[0]}
 		ZFSSIDE_DISK1=${ZFS_DISK1}s0
@@ -59,10 +75,30 @@ case "${#disk_array[*]}" in
 	if is_linux; then
 		DISK_COUNT=2
 		ZFS_DISK1=${disk_array[0]}
+		if is_mpath_device $ZFS_DISK1; then
+			export DEV_DSKDIR=$DEV_MPATHDIR
+		else
+			export DEV_DSKDIR=$DEV_RDSKDIR
+		fi
+		if ( is_mpath_device $ZFS_DISK1 ) && [[ -z $($ECHO $ZFS_DISK1 | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $ZFS_DISK1 ); then
+			ZFSSIDE_DISK1=${ZFS_DISK1}1
+		elif ( is_mpath_device $ZFS_DISK1 || is_loop_device $ZFS_DISK1 ); then
 			ZFSSIDE_DISK1=${ZFS_DISK1}p1
+		else
+			log_fail "$ZFS_DISK1 not supported for partitioning."
+		fi
 		ZFS_DISK2=${disk_array[1]}
+		if ( is_mpath_device $ZFS_DISK2 ) && [[ -z $($ECHO $ZFS_DISK2 | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $ZFS_DISK2 ); then
+			ZFSSIDE_DISK2=${ZFS_DISK2}1
+		elif ( is_mpath_device $ZFS_DISK2 || is_loop_device $ZFS_DISK2 ); then
 			ZFSSIDE_DISK2=${ZFS_DISK2}p1
 		else
+			log_fail "$ZFS_DISK2 not supported for partitioning."
+		fi
+	else
+		export DEV_DSKDIR="/dev"
 		DISK_COUNT=2
 		ZFS_DISK1=${disk_array[0]}
 		ZFSSIDE_DISK1=${ZFS_DISK1}s0

tests/zfs-tests/tests/functional/cli_root/zpool_remove/cleanup.ksh

@@ -26,6 +26,12 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/cli_root/zpool_remove/zpool_remove.cfg
+
+DISK=${DISKS%% *}
+if is_mpath_device $DISK; then
+        delete_partitions
+fi
 
 cleanup_devices $DISKS
 

tests/zfs-tests/tests/functional/cli_root/zpool_remove/zpool_remove.cfg

@@ -30,9 +30,12 @@
 
 export DISK=${DISKS%% *}
 export SIZE="200m"
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+export DISKSARRAY=$DISKS
 
 if is_linux; then
-	export SLICE_PREFIX="p"
+	set_device_dir
+	set_slice_prefix
 	export SLICE0=1
 	export SLICE1=2
 	export SLICE2=3

tests/zfs-tests/tests/functional/cli_root/zpool_scrub/zpool_scrub.cfg

@@ -28,5 +28,5 @@
 # Copyright (c) 2012 by Delphix. All rights reserved.
 #
 
-export DISK1=$($ECHO $DISKS | $AWK '{print $1}')
+export DISK1=${DISKS%% *}
 export DISK2=$($ECHO $DISKS | $AWK '{print $2}')

tests/zfs-tests/tests/functional/grow_pool/grow_pool.cfg

@@ -60,7 +60,8 @@ export TESTFILE1=file$$.1
 export WRITE_COUNT=65536000
 
 if is_linux; then
-	export SLICE_PREFIX="p"
+	set_device_dir
+	set_slice_prefix
 	export SLICE=1
 	export SLICE0=1
 	export SLICE1=2

tests/zfs-tests/tests/functional/grow_replicas/grow_replicas.cfg

@@ -61,7 +61,8 @@ export WRITE_COUNT=65536000
 
 if is_linux; then
 	export SLICES="0 1 2 3 4"
-	export SLICE_PREFIX="p"
+	set_device_dir
+	set_slice_prefix
 	export SLICE0=1
 	export SLICE1=2
 	export SLICE2=3

tests/zfs-tests/tests/functional/inuse/inuse.cfg

@@ -31,7 +31,8 @@
 . $STF_SUITE/include/libtest.shlib
 
 if is_linux; then
-	export SLICE_PREFIX="p"
+	set_device_dir
+	set_slice_prefix
 	export SLICE0=1
 	export SLICE1=2
 else

tests/zfs-tests/tests/functional/migration/cleanup.ksh

@@ -41,6 +41,11 @@ ismounted $TESTPOOL/$TESTFS
 [[ $? == 0 ]] && log_must $ZFS umount -f $TESTDIR
 destroy_pool $TESTPOOL
 
+DISK=${DISKS%% *}
+if is_mpath_device $DISK; then
+        delete_partitions
+fi
+
 # recreate and destroy a zpool over the disks to restore the partitions to
 # normal
 case $DISK_COUNT in

tests/zfs-tests/tests/functional/migration/migration.cfg

@@ -30,6 +30,8 @@
 
 . $STF_SUITE/include/libtest.shlib
 
+export DISKSARRAY=$DISKS
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
 set -A disk_array $(find_disks $DISKS)
 case "${#disk_array[*]}" in
 0)
@@ -42,9 +44,23 @@ case "${#disk_array[*]}" in
 	SINGLE_DISK=$ZFS_DISK
 	NONZFS_DISK=$ZFS_DISK
 	if is_linux; then
+		if is_mpath_device $ZFS_DISK; then
+			export DEV_DSKDIR=$DEV_MPATHDIR
+		else
+			export DEV_DSKDIR=$DEV_RDSKDIR
+		fi
+		if ( is_mpath_device $ZFS_DISK ) && [[ -z $($ECHO $ZFS_DISK | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $ZFS_DISK ); then
+			ZFSSIDE_DISK=${SINGLE_DISK}1
+			NONZFSSIDE_DISK=${SINGLE_DISK}2
+		elif ( is_mpath_device $ZFS_DISK || is_loop_device $ZFS_DISK ); then
 			ZFSSIDE_DISK=${SINGLE_DISK}p1
 			NONZFSSIDE_DISK=${SINGLE_DISK}p2
 		else
+			log_fail "$ZFS_DISK not supported for partitioning."
+		fi
+	else
+		export DEV_DSKDIR="/dev"
 		ZFSSIDE_DISK=${SINGLE_DISK}s0
 		NONZFSSIDE_DISK=${SINGLE_DISK}s1
 	fi
@@ -55,9 +71,29 @@ case "${#disk_array[*]}" in
 	ZFS_DISK=${disk_array[0]}
 	NONZFS_DISK=${disk_array[1]}
 	if is_linux; then
+		if is_mpath_device $ZFS_DISK; then
+			export DEV_DSKDIR=$DEV_MPATHDIR
+		else
+			export DEV_DSKDIR=$DEV_RDSKDIR
+		fi
+		if ( is_mpath_device $ZFS_DISK ) && [[ -z $($ECHO $ZFS_DISK | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $ZFS_DISK ); then
+			ZFSSIDE_DISK=${ZFS_DISK}1
+		elif ( is_mpath_device $ZFS_DISK || is_loop_device $ZFS_DISK ); then
 			ZFSSIDE_DISK=${ZFS_DISK}p1
+		else
+			log_fail "$ZFS_DISK not supported for partitioning."
+		fi
+		if ( is_mpath_device $NONZFS_DISK ) && [[ -z $($ECHO $NONZFS_DISK | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $NONZFS_DISK ); then
+			NONZFSSIDE_DISK=${NONZFS_DISK}1
+		elif ( is_mpath_device $NONZFS_DISK || is_loop_device $NONZFS_DISK ); then
 			NONZFSSIDE_DISK=${NONZFS_DISK}p1
 		else
+			log_fail "$NONZFS_DISK not supported for partitioning."
+		fi
+	else
+		export DEV_DSKDIR="/dev"
 		ZFSSIDE_DISK=${ZFS_DISK}s0
 		NONZFSSIDE_DISK=${NONZFS_DISK}s0
 	fi

tests/zfs-tests/tests/functional/migration/setup.ksh

@@ -64,7 +64,7 @@ log_must $ZFS set mountpoint=$TESTDIR $TESTPOOL/$TESTFS
 $RM -rf $NONZFS_TESTDIR  || log_unresolved Could not remove $NONZFS_TESTDIR
 $MKDIR -p $NONZFS_TESTDIR || log_unresolved Could not create $NONZFS_TESTDIR
 
-$ECHO "y" | $NEWFS -v ${DEV_RDSKDIR}/$NONZFSSIDE_DISK
+$ECHO "y" | $NEWFS -v ${DEV_DSKDIR}/$NONZFSSIDE_DISK
 (( $? != 0 )) &&
 	log_untested "Unable to setup a UFS file system"
 

tests/zfs-tests/tests/functional/mmap/Makefile.am

@@ -2,5 +2,6 @@ pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/mmap
 dist_pkgdata_SCRIPTS = \
 	setup.ksh \
 	cleanup.ksh \
+	mmap.cfg \
 	mmap_read_001_pos.ksh \
 	mmap_write_001_pos.ksh

tests/zfs-tests/tests/functional/mmap/mmap.cfg

@@ -0,0 +1,59 @@
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
+# Use is subject to license terms.
+#
+
+#
+# Copyright (c) 2012, 2014 by Delphix. All rights reserved.
+#
+
+. $STF_SUITE/include/libtest.shlib
+
+export DISK_ARRAY_NUM=0
+export DISK_ARRAY_LIMIT=4
+export DISKSARRAY=""
+export VDEVS_NUM=32
+
+function set_disks
+{
+        typeset -a disk_array=($(find_disks $DISKS))
+
+	if (( ${#disk_array[*]} <= 1 )); then
+		export DISK=${DISKS%% *}
+	else
+		export DISK=""
+		typeset -i i=0
+		while (( i < ${#disk_array[*]} )); do
+			export DISK${i}="${disk_array[$i]}"
+			DISKSARRAY="$DISKSARRAY ${disk_array[$i]}"
+			(( i = i + 1 ))
+			(( i>$DISK_ARRAY_LIMIT )) && break
+		done
+		export DISK_ARRAY_NUM=$i
+		export DISKSARRAY
+	fi
+}
+
+set_disks
+set_device_dir

tests/zfs-tests/tests/functional/mmap/mmap_read_001_pos.ksh

@@ -30,6 +30,7 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/mmap/mmap.cfg
 
 #
 # DESCRIPTION:

tests/zfs-tests/tests/functional/mv_files/mv_files.cfg

@@ -29,6 +29,9 @@
 #
 
 export DISK=${DISKS%% *}
+export DISKSARRAY=$DISKS
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+set_device_dir
 
 export TESTFILE=testfile
 

tests/zfs-tests/tests/functional/no_space/cleanup.ksh

@@ -40,6 +40,11 @@ ismounted "$TESTPOOL/$TESTFS"
         log_must $ZFS umount $TESTDIR
 
 destroy_pool $TESTPOOL
+
+if is_mpath_device $DISK; then
+	delete_partitions
+fi
+
 #
 # Remove 100mb partition.
 #

tests/zfs-tests/tests/functional/no_space/enospc.cfg

@@ -36,3 +36,7 @@ export ENOSPC=28
 export BLOCKSZ=8192
 export NUM_WRITES=65536
 export DATA=0
+
+export DISKSARRAY=$DISKS
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+set_device_dir

tests/zfs-tests/tests/functional/no_space/setup.ksh

@@ -43,7 +43,14 @@ DISK=${DISKS%% *}
 log_must set_partition 0 "" $SIZE $DISK
 
 if is_linux; then
+	if ( is_mpath_device $DISK ) && [[ -z $($ECHO $DISK | awk 'substr($1,18,1)\
+	    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $DISK ); then
+		default_setup $DISK"1"
+	elif ( is_mpath_device $DISK || is_loop_device $DISK ); then
 		default_setup $DISK"p1"
+	else
+		log_fail "$DISK not supported for partitioning."
+	fi
 else
 	default_setup $DISK"s0"
 fi

tests/zfs-tests/tests/functional/online_offline/online_offline.cfg

@@ -36,3 +36,7 @@ export HOLES_SEED=${HOLES_SEED-""}
 export HOLES_FILEOFFSET=${HOLES_FILEOFFSET-""}
 export HOLES_COUNT=${HOLES_COUNT-"16384"}	   # FILESIZE/BLKSIZE/8
 export STF_TIMEOUT=3600
+
+export DISKSARRAY=$DISKS
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+set_device_dir

tests/zfs-tests/tests/functional/rsend/rsend.cfg

@@ -29,7 +29,7 @@
 
 export BACKDIR=${TEST_BASE_DIR%%/}/backdir-rsend
 
-export DISK1=$($ECHO $DISKS | $AWK '{print $1}')
+export DISK1=${DISKS%% *}
 export DISK2=$($ECHO $DISKS | $AWK '{print $2}')
 
 export POOL=$TESTPOOL

tests/zfs-tests/tests/functional/scrub_mirror/cleanup.ksh

@@ -39,6 +39,11 @@ $DF -F zfs -h | $GREP "$TESTFS " >/dev/null
 [[ $? == 0 ]] && log_must $ZFS umount -f $TESTDIR
 destroy_pool $TESTPOOL
 
+DISK=${DISKS%% *}
+if is_mpath_device $DISK; then
+	delete_partitions
+fi
+
 # recreate and destroy a zpool over the disks to restore the partitions to
 # normal
 if [[ -n $SINGLE_DISK ]]; then

tests/zfs-tests/tests/functional/scrub_mirror/default.cfg

@@ -28,6 +28,9 @@
 # Copyright (c) 2013 by Delphix. All rights reserved.
 #
 
+export DISKSARRAY=$DISKS
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+
 typeset -i NUMBER_OF_DISKS=0
 for i in $DISKS; do
 	[[ -n $MIRROR_PRIMARY ]] && MIRROR_SECONDARY=$i
@@ -41,9 +44,23 @@ if [[ -z $MIRROR_SECONDARY ]]; then
 	SIDE_PRIMARY_PART=0
 	SIDE_SECONDARY_PART=1
 	if is_linux; then
+		if is_mpath_device $MIRROR_PRIMARY; then
+			export DEV_DSKDIR=$DEV_MPATHDIR
+		else
+			export DEV_DSKDIR=$DEV_RDSKDIR
+		fi
+		if ( is_mpath_device $SINGLE_DISK ) && [[ -z $($ECHO $SINGLE_DISK | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $SINGLE_DISK ); then
+			SIDE_PRIMARY=${SINGLE_DISK}1
+			SIDE_SECONDARY=${SINGLE_DISK}2
+		elif ( is_mpath_device $SINGLE_DISK || is_loop_device $SINGLE_DISK ); then
 			SIDE_PRIMARY=${SINGLE_DISK}p1
 			SIDE_SECONDARY=${SINGLE_DISK}p2
 		else
+			log_fail "$SINGLE_DISK not supported for partitioning."
+		fi
+	else
+		export DEV_DSKDIR="/dev"
 		SIDE_PRIMARY=${SINGLE_DISK}s${SIDE_PRIMARY_PART}
 		SIDE_SECONDARY=${SINGLE_DISK}s${SIDE_SECONDARY_PART}
 	fi
@@ -51,9 +68,29 @@ else
 	SIDE_PRIMARY_PART=0
 	SIDE_SECONDARY_PART=0
 	if is_linux; then
+		if is_mpath_device $MIRROR_PRIMARY; then
+			export DEV_DSKDIR=$DEV_MPATHDIR
+		else
+			export DEV_DSKDIR=$DEV_RDSKDIR
+		fi
+		if ( is_mpath_device $MIRROR_PRIMARY ) && [[ -z $($ECHO $MIRROR_PRIMARY | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $MIRROR_PRIMARY ); then
+			SIDE_PRIMARY=${MIRROR_PRIMARY}1
+		elif ( is_mpath_device $MIRROR_PRIMARY || is_loop_device $MIRROR_PRIMARY ); then
 			SIDE_PRIMARY=${MIRROR_PRIMARY}p1
+		else
+			log_fail "$MIRROR_PRIMARY not supported for partitioning."
+		fi
+		if ( is_mpath_device $MIRROR_SECONDARY ) && [[ -z $($ECHO $MIRROR_SECONDARY | awk 'substr($1,18,1)\
+		    ~ /^[[:digit:]]+$/') ]] || ( is_real_device $MIRROR_SECONDARY ); then
+			SIDE_SECONDARY=${MIRROR_SECONDARY}1
+		elif ( is_mpath_device $MIRROR_SECONDARY || is_loop_device $MIRROR_SECONDARY ); then
 			SIDE_SECONDARY=${MIRROR_SECONDARY}p1
 		else
+			log_fail "$MIRROR_SECONDARY not supported for partitioning."
+		fi
+	else
+		export DEV_DSKDIR="/dev"
 		SIDE_PRIMARY=${MIRROR_PRIMARY}s${SIDE_PRIMARY_PART}
 		SIDE_SECONDARY=${MIRROR_SECONDARY}s${SIDE_SECONDARY_PART}
 	fi

tests/zfs-tests/tests/functional/sparse/sparse.cfg

@@ -28,6 +28,8 @@
 # Copyright (c) 2013 by Delphix. All rights reserved.
 #
 
+. $STF_SUITE/include/libtest.shlib
+
 export TESTFILE=testfile.sparse
 export HOLES_FILESIZE=${HOLES_FILESIZE-"67108864"} # 64 Mb
 export HOLES_BLKSIZE=${HOLES_BLKSIZE-"512"}
@@ -35,3 +37,7 @@ export HOLES_SEED=${HOLES_SEED-""}
 export HOLES_FILEOFFSET=${HOLES_FILEOFFSET-""}
 export HOLES_COUNT=${HOLES_COUNT-"16384"}	   # FILESIZE/BLKSIZE/8
 export STF_TIMEOUT=3600
+
+export DISKSARRAY=$DISKS
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+set_device_dir

tests/zfs-tests/tests/functional/truncate/truncate.cfg

@@ -24,9 +24,16 @@
 # Use is subject to license terms.
 #
 
+. $STF_SUITE/include/libtest.shlib
+
 export TESTFILE=testfile.$$
 export TRUNC_FILESIZE=${TRUNC_FILESIZE-"67108864"} # 64 Mb
 export TRUNC_BLKSIZE=${TRUNC_BLKSIZE-"512"}
 export TRUNC_SEED=${TRUNC_SEED-""}
 export TRUNC_FILEOFFSET=${TRUNC_FILEOFFSET-""}
 export TRUNC_COUNT=${TRUNC_COUNT-"16384"}	   # FILESIZE/BLKSIZE/8
+
+export DISKSARRAY=$DISKS
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+
+set_device_dir

tests/zfs-tests/tests/functional/write_dirs/Makefile.am

@@ -2,5 +2,6 @@ pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/write_dirs
 dist_pkgdata_SCRIPTS = \
 	setup.ksh \
 	cleanup.ksh \
+	write_dirs.cfg \
 	write_dirs_001_pos.ksh \
 	write_dirs_002_pos.ksh

tests/zfs-tests/tests/functional/write_dirs/cleanup.ksh

@@ -30,5 +30,6 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/write_dirs/write_dirs.cfg
 
 default_cleanup

tests/zfs-tests/tests/functional/write_dirs/setup.ksh

@@ -30,28 +30,18 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/write_dirs/write_dirs.cfg
 
 verify_runnable "global"
 
-export SIZE="1gb"
-
-if is_linux; then
-	export SLICE_PREFIX="p"
-	export SLICE=0
-else
-	export SLICE_PREFIX="s"
-	export SLICE=0
-fi
-
 if ! $(is_physical_device $DISKS) ; then
 	log_unsupported "This directory cannot be run on raw files."
 fi
 
 DISK=${DISKS%% *}
-
+if is_mpath_device $DISK; then
-log_must set_partition $SLICE "" $SIZE $DISK
+         delete_partitions
-
-if is_linux; then
-	export SLICE=1
 fi
+log_must set_partition 0 "" $SIZE $DISK
+
 default_setup "${DISK}${SLICE_PREFIX}${SLICE}"

tests/zfs-tests/tests/functional/write_dirs/write_dirs.cfg

@@ -0,0 +1,48 @@
+#!/bin/ksh -p
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
+# Use is subject to license terms.
+#
+
+#
+# Copyright (c) 2013 by Delphix. All rights reserved.
+#
+
+. $STF_SUITE/include/libtest.shlib
+
+verify_runnable "global"
+
+export SIZE="1gb"
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+export DISKSARRAY=$DISKS
+
+if is_linux; then
+	set_slice_prefix
+	set_device_dir
+	export SLICE=1
+else
+	DEV_DSKDIR="/dev"
+	export SLICE_PREFIX="s"
+	export SLICE=0
+fi

tests/zfs-tests/tests/functional/write_dirs/write_dirs_001_pos.ksh

@@ -30,6 +30,7 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/write_dirs/write_dirs.cfg
 
 #
 # DESCRIPTION:

tests/zfs-tests/tests/functional/write_dirs/write_dirs_002_pos.ksh

@@ -30,6 +30,7 @@
 #
 
 . $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/write_dirs/write_dirs.cfg
 
 #
 # DESCRIPTION:

tests/zfs-tests/tests/functional/zvol/zvol_ENOSPC/Makefile.am

@@ -2,4 +2,5 @@ pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/zvol/zvol_ENOSPC
 dist_pkgdata_SCRIPTS = \
 	cleanup.ksh \
 	setup.ksh \
+	zvol_ENOSPC.cfg \
 	zvol_ENOSPC_001_pos.ksh

tests/zfs-tests/tests/functional/zvol/zvol_ENOSPC/setup.ksh

@@ -31,9 +31,15 @@
 
 . $STF_SUITE/include/libtest.shlib
 . $STF_SUITE/tests/functional/zvol/zvol_common.shlib
+. $STF_SUITE/tests/functional/zvol/zvol_ENOSPC/zvol_ENOSPC.cfg
 
 verify_runnable "global"
 
+DISK=${DISKS%% *}
+if is_mpath_device $DISK; then
+	delete_partitions
+fi
+
 default_zvol_setup $DISK $VOLSIZE
 
 $ECHO "y" | $NEWFS -v ${ZVOL_RDEVDIR}/$TESTPOOL/$TESTVOL >/dev/null 2>&1

tests/zfs-tests/tests/functional/zvol/zvol_ENOSPC/zvol_ENOSPC.cfg

@@ -0,0 +1,49 @@
+#!/bin/ksh -p
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
+# Use is subject to license terms.
+#
+
+#
+# Copyright (c) 2013 by Delphix. All rights reserved.
+#
+
+. $STF_SUITE/include/libtest.shlib
+
+verify_runnable "global"
+
+#export SIZE="1gb"
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+export DISKSARRAY=$DISKS
+
+
+if is_linux; then
+	set_slice_prefix
+	set_device_dir
+#	export SLICE=1
+else
+	DEV_DSKDIR="/dev"
+	export SLICE_PREFIX="s"
+#	export SLICE=0
+fi

tests/zfs-tests/tests/functional/zvol/zvol_cli/Makefile.am

@@ -2,6 +2,7 @@ pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/zvol/zvol_cli
 dist_pkgdata_SCRIPTS = \
 	cleanup.ksh \
 	setup.ksh \
+	zvol_cli.cfg \
 	zvol_cli_001_pos.ksh \
 	zvol_cli_002_pos.ksh \
 	zvol_cli_003_neg.ksh

tests/zfs-tests/tests/functional/zvol/zvol_cli/setup.ksh

@@ -31,9 +31,15 @@
 
 . $STF_SUITE/include/libtest.shlib
 . $STF_SUITE/tests/functional/zvol/zvol_common.shlib
+. $STF_SUITE/tests/functional/zvol/zvol_cli/zvol_cli.cfg
 
 verify_runnable "global"
 
+DISK=${DISKS%% *}
+if is_mpath_device $DISK; then
+	delete_partitions
+fi
+
 default_zvol_setup $DISK $VOLSIZE
 
 log_pass

tests/zfs-tests/tests/functional/zvol/zvol_cli/zvol_cli.cfg

@@ -0,0 +1,46 @@
+#!/bin/ksh -p
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
+# Use is subject to license terms.
+#
+
+#
+# Copyright (c) 2013 by Delphix. All rights reserved.
+#
+
+. $STF_SUITE/include/libtest.shlib
+
+verify_runnable "global"
+
+export DISK_ARRAY_NUM=$($ECHO ${DISKS} | $NAWK '{print NF}')
+export DISKSARRAY=$DISKS
+
+
+if is_linux; then
+	set_slice_prefix
+	set_device_dir
+else
+	DEV_DSKDIR="/dev"
+	export SLICE_PREFIX="s"
+fi