Verify dRAID empty sectors

Verify that all empty sectors are zero filled before using them to
calculate parity.  Failure to do so can result in incorrect parity
columns being generated and written to disk if the contents of an
empty sector are non-zero.  This was possible because the checksum
only protects the data portions of the buffer, not the empty sector
padding.

This issue has been addressed by updating raidz_parity_verify() to
check that all dRAID empty sectors are zero filled.  Any sectors
which are non-zero will be fixed, repair IO issued, and a checksum
error logged.  They can then be safely used to verify the parity.

This specific type of damage is unlikely to occur since it requires
a disk to have silently returned bad data, for an empty sector, while
performing a scrub.  However, if a pool were to have been damaged
in this way, scrubbing the pool with this change applied will repair
both the empty sector and parity columns as long as the data checksum
is valid.  Checksum errors will be reported in the `zpool status`
output for any repairs which are made.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12857

include/sys/vdev_draid.h

@@ -96,6 +96,7 @@ extern boolean_t vdev_draid_readable(vdev_t *, uint64_t);
 extern boolean_t vdev_draid_missing(vdev_t *, uint64_t, uint64_t, uint64_t);
 extern uint64_t vdev_draid_asize_to_psize(vdev_t *, uint64_t);
 extern void vdev_draid_map_alloc_empty(zio_t *, struct raidz_row *);
+extern int vdev_draid_map_verify_empty(zio_t *, struct raidz_row *);
 extern nvlist_t *vdev_draid_read_config_spare(vdev_t *);
 
 /* Functions for dRAID distributed spares. */

include/sys/vdev_raidz.h

@@ -32,6 +32,7 @@ extern "C" {
 #endif
 
 struct zio;
+struct raidz_col;
 struct raidz_row;
 struct raidz_map;
 #if !defined(_KERNEL)
@@ -49,6 +50,7 @@ void vdev_raidz_generate_parity(struct raidz_map *);
 void vdev_raidz_reconstruct(struct raidz_map *, const int *, int);
 void vdev_raidz_child_done(zio_t *);
 void vdev_raidz_io_done(zio_t *);
+void vdev_raidz_checksum_error(zio_t *, struct raidz_col *, abd_t *);
 
 extern const zio_vsd_ops_t vdev_raidz_vsd_ops;
 

module/zfs/vdev_draid.c

@@ -841,6 +841,53 @@ vdev_draid_map_alloc_empty(zio_t *zio, raidz_row_t *rr)
 	ASSERT3U(skip_off, ==, rr->rr_nempty * skip_size);
 }
 
+/*
+ * Verify that all empty sectors are zero filled before using them to
+ * calculate parity.  Otherwise, silent corruption in an empty sector will
+ * result in bad parity being generated.  That bad parity will then be
+ * considered authoritative and overwrite the good parity on disk.  This
+ * is possible because the checksum is only calculated over the data,
+ * thus it cannot be used to detect damage in empty sectors.
+ */
+int
+vdev_draid_map_verify_empty(zio_t *zio, raidz_row_t *rr)
+{
+	uint64_t skip_size = 1ULL << zio->io_vd->vdev_top->vdev_ashift;
+	uint64_t parity_size = rr->rr_col[0].rc_size;
+	uint64_t skip_off = parity_size - skip_size;
+	uint64_t empty_off = 0;
+	int ret = 0;
+
+	ASSERT3U(zio->io_type, ==, ZIO_TYPE_READ);
+	ASSERT3P(rr->rr_abd_empty, !=, NULL);
+	ASSERT3U(rr->rr_bigcols, >, 0);
+
+	void *zero_buf = kmem_zalloc(skip_size, KM_SLEEP);
+
+	for (int c = rr->rr_bigcols; c < rr->rr_cols; c++) {
+		raidz_col_t *rc = &rr->rr_col[c];
+
+		ASSERT3P(rc->rc_abd, !=, NULL);
+		ASSERT3U(rc->rc_size, ==, parity_size);
+
+		if (abd_cmp_buf_off(rc->rc_abd, zero_buf, skip_off,
+		    skip_size) != 0) {
+			vdev_raidz_checksum_error(zio, rc, rc->rc_abd);
+			abd_zero_off(rc->rc_abd, skip_off, skip_size);
+			rc->rc_error = SET_ERROR(ECKSUM);
+			ret++;
+		}
+
+		empty_off += skip_size;
+	}
+
+	ASSERT3U(empty_off, ==, abd_get_size(rr->rr_abd_empty));
+
+	kmem_free(zero_buf, skip_size);
+
+	return (ret);
+}
+
 /*
  * Given a logical address within a dRAID configuration, return the physical
  * address on the first drive in the group that this address maps to

module/zfs/vdev_raidz.c

@@ -1654,8 +1654,8 @@ vdev_raidz_io_start(zio_t *zio)
 /*
  * Report a checksum error for a child of a RAID-Z device.
  */
-static void
+void
-raidz_checksum_error(zio_t *zio, raidz_col_t *rc, abd_t *bad_data)
+vdev_raidz_checksum_error(zio_t *zio, raidz_col_t *rc, abd_t *bad_data)
 {
 	vdev_t *vd = zio->io_vd->vdev_child[rc->rc_devidx];
 
@@ -1725,6 +1725,13 @@ raidz_parity_verify(zio_t *zio, raidz_row_t *rr)
 		abd_copy(orig[c], rc->rc_abd, rc->rc_size);
 	}
 
+	/*
+	 * Verify any empty sectors are zero filled to ensure the parity
+	 * is calculated correctly even if these non-data sectors are damaged.
+	 */
+	if (rr->rr_nempty && rr->rr_abd_empty != NULL)
+		ret += vdev_draid_map_verify_empty(zio, rr);
+
 	/*
 	 * Regenerates parity even for !tried||rc_error!=0 columns.  This
 	 * isn't harmful but it does have the side effect of fixing stuff
@@ -1739,7 +1746,7 @@ raidz_parity_verify(zio_t *zio, raidz_row_t *rr)
 			continue;
 
 		if (abd_cmp(orig[c], rc->rc_abd) != 0) {
-			raidz_checksum_error(zio, rc, orig[c]);
+			vdev_raidz_checksum_error(zio, rc, orig[c]);
 			rc->rc_error = SET_ERROR(ECKSUM);
 			ret++;
 		}
@@ -1799,7 +1806,6 @@ vdev_raidz_io_done_verified(zio_t *zio, raidz_row_t *rr)
 	    (zio->io_flags & ZIO_FLAG_RESILVER)) {
 		int n = raidz_parity_verify(zio, rr);
 		unexpected_errors += n;
-		ASSERT3U(parity_errors + n, <=, rr->rr_firstdatacol);
 	}
 
 	if (zio->io_error == 0 && spa_writeable(zio->io_spa) &&
@@ -1925,7 +1931,7 @@ raidz_reconstruct(zio_t *zio, int *ltgts, int ntgts, int nparity)
 					 */
 					if (rc->rc_error == 0 &&
 					    c >= rr->rr_firstdatacol) {
-						raidz_checksum_error(zio,
+						vdev_raidz_checksum_error(zio,
 						    rc, rc->rc_orig_data);
 						rc->rc_error =
 						    SET_ERROR(ECKSUM);

tests/zfs-tests/tests/functional/cli_root/zpool_events/zpool_events_errors.ksh

@@ -28,11 +28,12 @@
 #	in zpool status.
 #
 # STRATEGY:
-#	1. Create a raidz or mirror pool
+#	1. Create a mirror, raidz, or draid pool
 #	2. Inject read/write IO errors or checksum errors
 #	3. Verify the number of errors in zpool status match the corresponding
 #	   number of error events.
-#	4. Repeat for all combinations of raidz/mirror and io/checksum errors.
+#	4. Repeat for all combinations of mirror/raidz/draid and io/checksum
+#	   errors.
 #
 
 . $STF_SUITE/include/libtest.shlib
@@ -74,7 +75,7 @@ log_must mkdir -p $MOUNTDIR
 
 # Run error test on a specific type of pool
 #
-# $1: pool - raidz, mirror
+# $1: pool - mirror, raidz, draid
 # $2: test type - corrupt (checksum error), io
 # $3: read, write
 function do_test
@@ -142,8 +143,8 @@ function do_test
 	log_must zpool destroy $POOL
 }
 
-# Test all types of errors on mirror and raidz pools
+# Test all types of errors on mirror, raidz, and draid pools
-for pooltype in mirror raidz ; do
+for pooltype in mirror raidz draid; do
 	do_test $pooltype corrupt read
 	do_test $pooltype io read
 	do_test $pooltype io write