zed.d/pool_import-led.sh: fix for current zpool scripts

Also minor clean-up with folding state_to_val() into a case,
unrolling the lesser-available seq into numbers,
ignoring vdev states we don't care about,
and documentation comments

Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes #11934
Closes #11935
This commit is contained in:
наб 2021-04-23 22:27:50 +02:00 committed by Tony Hutter
parent 110d0ba5ca
commit 586358102e
1 changed files with 45 additions and 45 deletions

View File

@ -1,21 +1,21 @@
#!/bin/sh
#
# Turn off/on the VDEV's enclosure fault LEDs when the pool's state changes.
# Turn off/on vdevs' enclosure fault LEDs when their pool's state changes.
#
# Turn the VDEV's fault LED on if it becomes FAULTED, DEGRADED or UNAVAIL.
# Turn the LED off when it's back ONLINE again.
# Turn a vdev's fault LED on if it becomes FAULTED, DEGRADED or UNAVAIL.
# Turn its LED off when it's back ONLINE again.
#
# This script run in two basic modes:
#
# 1. If $ZEVENT_VDEV_ENC_SYSFS_PATH and $ZEVENT_VDEV_STATE_STR are set, then
# only set the LED for that particular VDEV. This is the case for statechange
# only set the LED for that particular vdev. This is the case for statechange
# events and some vdev_* events.
#
# 2. If those vars are not set, then check the state of all VDEVs in the pool
# 2. If those vars are not set, then check the state of all vdevs in the pool
# and set the LEDs accordingly. This is the case for pool_import events.
#
# Note that this script requires that your enclosure be supported by the
# Linux SCSI enclosure services (ses) driver. The script will do nothing
# Linux SCSI Enclosure services (SES) driver. The script will do nothing
# if you have no enclosure, or if your enclosure isn't supported.
#
# Exit codes:
@ -59,6 +59,10 @@ check_and_set_led()
file="$1"
val="$2"
if [ -z "$val" ]; then
return 0
fi
if [ ! -e "$file" ] ; then
return 3
fi
@ -66,11 +70,11 @@ check_and_set_led()
# If another process is accessing the LED when we attempt to update it,
# the update will be lost so retry until the LED actually changes or we
# timeout.
for _ in $(seq 1 5); do
for _ in 1 2 3 4 5; do
# We want to check the current state first, since writing to the
# 'fault' entry always causes a SES command, even if the
# current state is already what you want.
current=$(cat "${file}")
read -r current < "${file}"
# On some enclosures if you write 1 to fault, and read it back,
# it will return 2. Treat all non-zero values as 1 for
@ -91,21 +95,23 @@ check_and_set_led()
state_to_val()
{
state="$1"
if [ "$state" = "FAULTED" ] || [ "$state" = "DEGRADED" ] || \
[ "$state" = "UNAVAIL" ] ; then
case "$state" in
FAULTED|DEGRADED|UNAVAIL)
echo 1
elif [ "$state" = "ONLINE" ] ; then
;;
ONLINE)
echo 0
fi
;;
esac
}
# process_pool ([pool])
# process_pool (pool)
#
# Iterate through a pool (or pools) and set the VDEV's enclosure slot LEDs to
# the VDEV's state.
# Iterate through a pool and set the vdevs' enclosure slot LEDs to
# those vdevs' state.
#
# Arguments
# pool: Optional pool name. If not specified, iterate though all pools.
# pool: Pool name.
#
# Return
# 0 on success, 3 on missing sysfs path
@ -113,19 +119,22 @@ state_to_val()
process_pool()
{
pool="$1"
# The output will be the vdevs only (from "grep '/dev/'"):
#
# U45 ONLINE 0 0 0 /dev/sdk 0
# U46 ONLINE 0 0 0 /dev/sdm 0
# U47 ONLINE 0 0 0 /dev/sdn 0
# U50 ONLINE 0 0 0 /dev/sdbn 0
#
ZPOOL_SCRIPTS_AS_ROOT=1 $ZPOOL status -c upath,fault_led "$pool" | grep '/dev/' | (
rc=0
# Lookup all the current LED values and paths in parallel
#shellcheck disable=SC2016
cmd='echo led_token=$(cat "$VDEV_ENC_SYSFS_PATH/fault"),"$VDEV_ENC_SYSFS_PATH",'
out=$($ZPOOL status -vc "$cmd" "$pool" | grep 'led_token=')
#shellcheck disable=SC2034
echo "$out" | while read -r vdev state read write chksum therest; do
while read -r vdev state _ _ _ therest; do
# Read out current LED value and path
tmp=$(echo "$therest" | sed 's/^.*led_token=//g')
vdev_enc_sysfs_path=$(echo "$tmp" | awk -F ',' '{print $2}')
current_val=$(echo "$tmp" | awk -F ',' '{print $1}')
# Get dev name (like 'sda')
dev=$(basename "$(echo "$therest" | awk '{print $(NF-1)}')")
vdev_enc_sysfs_path=$(realpath "/sys/class/block/$dev/device/enclosure_device"*)
current_val=$(echo "$therest" | awk '{print $NF}')
if [ "$current_val" != "0" ] ; then
current_val=1
@ -137,36 +146,27 @@ process_pool()
fi
if [ ! -e "$vdev_enc_sysfs_path/fault" ] ; then
#shellcheck disable=SC2030
rc=1
rc=3
zed_log_msg "vdev $vdev '$file/fault' doesn't exist"
continue;
continue
fi
val=$(state_to_val "$state")
if [ "$current_val" = "$val" ] ; then
# LED is already set correctly
continue;
continue
fi
if ! check_and_set_led "$vdev_enc_sysfs_path/fault" "$val"; then
rc=1
rc=3
fi
done
#shellcheck disable=SC2031
if [ "$rc" = "0" ] ; then
return 0
else
# We didn't see a sysfs entry that we wanted to set
return 3
fi
exit "$rc"; )
}
if [ -n "$ZEVENT_VDEV_ENC_SYSFS_PATH" ] && [ -n "$ZEVENT_VDEV_STATE_STR" ] ; then
# Got a statechange for an individual VDEV
# Got a statechange for an individual vdev
val=$(state_to_val "$ZEVENT_VDEV_STATE_STR")
vdev=$(basename "$ZEVENT_VDEV_PATH")
check_and_set_led "$ZEVENT_VDEV_ENC_SYSFS_PATH/fault" "$val"