From 5662fd57941d020e23160b271dc27f254fb5a3c6 Mon Sep 17 00:00:00 2001 From: Matthew Ahrens Date: Tue, 11 Jun 2019 09:02:31 -0700 Subject: [PATCH] single-chunk scatter ABDs can be treated as linear Scatter ABD's are allocated from a number of pages. In contrast to linear ABD's, these pages are disjoint in the kernel's virtual address space, so they can't be accessed as a contiguous buffer. Therefore routines that need a linear buffer (e.g. abd_borrow_buf() and friends) must allocate a separate linear buffer (with zio_buf_alloc()), and copy the contents of the pages to/from the linear buffer. This can have a measurable performance overhead on some workloads. https://github.com/zfsonlinux/zfs/commit/87c25d567fb7969b44c7d8af63990e ("abd_alloc should use scatter for >1K allocations") increased the use of scatter ABD's, specifically switching 1.5K through 4K (inclusive) buffers from linear to scatter. For workloads that access blocks whose compressed sizes are in this range, that commit introduced an additional copy into the read code path. For example, the sequential_reads_arc_cached tests in the test suite were reduced by around 5% (this is doing reads of 8K-logical blocks, compressed to 3K, which are cached in the ARC). This commit treats single-chunk scattered buffers as linear buffers, because they are contiguous in the kernel's virtual address space. All single-page (4K) ABD's can be represented this way. Some multi-page ABD's can also be represented this way, if we were able to allocate a single "chunk" (higher-order "page" which represents a power-of-2 series of physically-contiguous pages). This is often the case for 2-page (8K) ABD's. Representing a single-entry scatter ABD as a linear ABD has the performance advantage of avoiding the copy (and allocation) in abd_borrow_buf_copy / abd_return_buf_copy. A performance increase of around 5% has been observed for ARC-cached reads (of small blocks which can take advantage of this), fixing the regression introduced by 87c25d567. Note that this optimization is only possible because all physical memory is always mapped into the kernel's address space. This is not the case for HIGHMEM pages, so the optimization can not be made on 32-bit systems. Reviewed-by: Chunwei Chen Reviewed-by: Brian Behlendorf Signed-off-by: Matthew Ahrens Closes #8580 --- include/sys/abd.h | 13 ++++- module/zfs/abd.c | 120 ++++++++++++++++++++++++++++++---------------- module/zfs/arc.c | 17 +++++-- module/zfs/zio.c | 6 --- 4 files changed, 102 insertions(+), 54 deletions(-) diff --git a/include/sys/abd.h b/include/sys/abd.h index 3d9fdbf102..b781be4da7 100644 --- a/include/sys/abd.h +++ b/include/sys/abd.h @@ -20,7 +20,7 @@ */ /* * Copyright (c) 2014 by Chunwei Chen. All rights reserved. - * Copyright (c) 2016 by Delphix. All rights reserved. + * Copyright (c) 2016, 2019 by Delphix. All rights reserved. */ #ifndef _ABD_H @@ -44,7 +44,8 @@ typedef enum abd_flags { ABD_FLAG_OWNER = 1 << 1, /* does it own its data buffers? */ ABD_FLAG_META = 1 << 2, /* does this represent FS metadata? */ ABD_FLAG_MULTI_ZONE = 1 << 3, /* pages split over memory zones */ - ABD_FLAG_MULTI_CHUNK = 1 << 4 /* pages split over multiple chunks */ + ABD_FLAG_MULTI_CHUNK = 1 << 4, /* pages split over multiple chunks */ + ABD_FLAG_LINEAR_PAGE = 1 << 5, /* linear but allocd from page */ } abd_flags_t; typedef struct abd { @@ -60,6 +61,7 @@ typedef struct abd { } abd_scatter; struct abd_linear { void *abd_buf; + struct scatterlist *abd_sgl; /* for LINEAR_PAGE */ } abd_linear; } abd_u; } abd_t; @@ -75,6 +77,13 @@ abd_is_linear(abd_t *abd) return ((abd->abd_flags & ABD_FLAG_LINEAR) != 0 ? B_TRUE : B_FALSE); } +static inline boolean_t +abd_is_linear_page(abd_t *abd) +{ + return ((abd->abd_flags & ABD_FLAG_LINEAR_PAGE) != 0 ? + B_TRUE : B_FALSE); +} + /* * Allocations and deallocations */ diff --git a/module/zfs/abd.c b/module/zfs/abd.c index 9041bd8b18..9f688d9bc2 100644 --- a/module/zfs/abd.c +++ b/module/zfs/abd.c @@ -72,17 +72,19 @@ * (2) Fragmentation is less of an issue since when we are at the limit of * allocatable space, we won't have to search around for a long free * hole in the VA space for large ARC allocations. Each chunk is mapped in - * individually, so even if we weren't using segkpm (see next point) we + * individually, so even if we are using HIGHMEM (see next point) we * wouldn't need to worry about finding a contiguous address range. * - * (3) Use of segkpm will avoid the need for map / unmap / TLB shootdown costs - * on each ABD access. (If segkpm isn't available then we use all linear - * ABDs to avoid this penalty.) See seg_kpm.c for more details. + * (3) If we are not using HIGHMEM, then all physical memory is always + * mapped into the kernel's address space, so we also avoid the map / + * unmap costs on each ABD access. + * + * If we are not using HIGHMEM, scattered buffers which have only one chunk + * can be treated as linear buffers, because they are contiguous in the + * kernel's virtual address space. See abd_alloc_pages() for details. * * It is possible to make all ABDs linear by setting zfs_abd_scatter_enabled to - * B_FALSE. However, it is not possible to use scattered ABDs if segkpm is not - * available, which is the case on all 32-bit systems and any 64-bit systems - * where kpm_enable is turned off. + * B_FALSE. * * In addition to directly allocating a linear or scattered ABD, it is also * possible to create an ABD by requesting the "sub-ABD" starting at an offset @@ -249,18 +251,6 @@ abd_chunkcnt_for_bytes(size_t size) #define __GFP_RECLAIM __GFP_WAIT #endif -static unsigned long -abd_alloc_chunk(int nid, gfp_t gfp, unsigned int order) -{ - struct page *page; - - page = alloc_pages_node(nid, gfp, order); - if (!page) - return (0); - - return ((unsigned long) page_address(page)); -} - /* * The goal is to minimize fragmentation by preferentially populating ABDs * with higher order compound pages from a single zone. Allocation size is @@ -283,19 +273,18 @@ abd_alloc_pages(abd_t *abd, size_t size) size_t remaining_size; int nid = NUMA_NO_NODE; int alloc_pages = 0; - int order; INIT_LIST_HEAD(&pages); while (alloc_pages < nr_pages) { - unsigned long paddr; unsigned chunk_pages; + int order; order = MIN(highbit64(nr_pages - alloc_pages) - 1, max_order); chunk_pages = (1U << order); - paddr = abd_alloc_chunk(nid, order ? gfp_comp : gfp, order); - if (paddr == 0) { + page = alloc_pages_node(nid, order ? gfp_comp : gfp, order); + if (page == NULL) { if (order == 0) { ABDSTAT_BUMP(abdstat_scatter_page_alloc_retry); schedule_timeout_interruptible(1); @@ -305,7 +294,6 @@ abd_alloc_pages(abd_t *abd, size_t size) continue; } - page = virt_to_page(paddr); list_add_tail(&page->lru, &pages); if ((nid != NUMA_NO_NODE) && (page_to_nid(page) != nid)) @@ -336,7 +324,41 @@ abd_alloc_pages(abd_t *abd, size_t size) list_del(&page->lru); } - if (chunks > 1) { + /* + * These conditions ensure that a possible transformation to a linear + * ABD would be valid. + */ + ASSERT(!PageHighMem(sg_page(table.sgl))); + ASSERT0(ABD_SCATTER(abd).abd_offset); + + if (table.nents == 1) { + /* + * Since there is only one entry, this ABD can be represented + * as a linear buffer. All single-page (4K) ABD's can be + * represented this way. Some multi-page ABD's can also be + * represented this way, if we were able to allocate a single + * "chunk" (higher-order "page" which represents a power-of-2 + * series of physically-contiguous pages). This is often the + * case for 2-page (8K) ABD's. + * + * Representing a single-entry scatter ABD as a linear ABD + * has the performance advantage of avoiding the copy (and + * allocation) in abd_borrow_buf_copy / abd_return_buf_copy. + * A performance increase of around 5% has been observed for + * ARC-cached reads (of small blocks which can take advantage + * of this). + * + * Note that this optimization is only possible because the + * pages are always mapped into the kernel's address space. + * This is not the case for highmem pages, so the + * optimization can not be made there. + */ + abd->abd_flags |= ABD_FLAG_LINEAR; + abd->abd_flags |= ABD_FLAG_LINEAR_PAGE; + abd->abd_u.abd_linear.abd_sgl = table.sgl; + abd->abd_u.abd_linear.abd_buf = + page_address(sg_page(table.sgl)); + } else if (table.nents > 1) { ABDSTAT_BUMP(abdstat_scatter_page_multi_chunk); abd->abd_flags |= ABD_FLAG_MULTI_CHUNK; @@ -344,10 +366,10 @@ abd_alloc_pages(abd_t *abd, size_t size) ABDSTAT_BUMP(abdstat_scatter_page_multi_zone); abd->abd_flags |= ABD_FLAG_MULTI_ZONE; } - } - ABD_SCATTER(abd).abd_sgl = table.sgl; - ABD_SCATTER(abd).abd_nents = table.nents; + ABD_SCATTER(abd).abd_sgl = table.sgl; + ABD_SCATTER(abd).abd_nents = table.nents; + } } #else /* @@ -427,10 +449,6 @@ abd_free_pages(abd_t *abd) struct page; -#define kpm_enable 1 -#define abd_alloc_chunk(o) \ - ((struct page *)umem_alloc_aligned(PAGESIZE << (o), 64, KM_SLEEP)) -#define abd_free_chunk(chunk, o) umem_free(chunk, PAGESIZE << (o)) #define zfs_kmap_atomic(chunk, km) ((void *)chunk) #define zfs_kunmap_atomic(addr, km) do { (void)(addr); } while (0) #define local_irq_save(flags) do { (void)(flags); } while (0) @@ -491,7 +509,7 @@ abd_alloc_pages(abd_t *abd, size_t size) sg_init_table(ABD_SCATTER(abd).abd_sgl, nr_pages); abd_for_each_sg(abd, sg, nr_pages, i) { - struct page *p = abd_alloc_chunk(0); + struct page *p = umem_alloc_aligned(PAGESIZE, 64, KM_SLEEP); sg_set_page(sg, p, PAGESIZE, 0); } ABD_SCATTER(abd).abd_nents = nr_pages; @@ -502,12 +520,11 @@ abd_free_pages(abd_t *abd) { int i, n = ABD_SCATTER(abd).abd_nents; struct scatterlist *sg; - int j; abd_for_each_sg(abd, sg, n, i) { - for (j = 0; j < sg->length; j += PAGESIZE) { - struct page *p = nth_page(sg_page(sg), j>>PAGE_SHIFT); - abd_free_chunk(p, 0); + for (int j = 0; j < sg->length; j += PAGESIZE) { + struct page *p = nth_page(sg_page(sg), j >> PAGE_SHIFT); + umem_free(p, PAGESIZE); } } @@ -560,7 +577,7 @@ abd_verify(abd_t *abd) ASSERT3U(abd->abd_size, <=, SPA_MAXBLOCKSIZE); ASSERT3U(abd->abd_flags, ==, abd->abd_flags & (ABD_FLAG_LINEAR | ABD_FLAG_OWNER | ABD_FLAG_META | ABD_FLAG_MULTI_ZONE | - ABD_FLAG_MULTI_CHUNK)); + ABD_FLAG_MULTI_CHUNK | ABD_FLAG_LINEAR_PAGE)); IMPLY(abd->abd_parent != NULL, !(abd->abd_flags & ABD_FLAG_OWNER)); IMPLY(abd->abd_flags & ABD_FLAG_META, abd->abd_flags & ABD_FLAG_OWNER); if (abd_is_linear(abd)) { @@ -613,6 +630,7 @@ abd_alloc(size_t size, boolean_t is_metadata) abd_t *abd = abd_alloc_struct(); abd->abd_flags = ABD_FLAG_OWNER; + abd->abd_u.abd_scatter.abd_offset = 0; abd_alloc_pages(abd, size); if (is_metadata) { @@ -622,8 +640,6 @@ abd_alloc(size_t size, boolean_t is_metadata) abd->abd_parent = NULL; zfs_refcount_create(&abd->abd_children); - abd->abd_u.abd_scatter.abd_offset = 0; - ABDSTAT_BUMP(abdstat_scatter_cnt); ABDSTAT_INCR(abdstat_scatter_data_size, size); ABDSTAT_INCR(abdstat_scatter_chunk_waste, @@ -681,6 +697,17 @@ abd_alloc_linear(size_t size, boolean_t is_metadata) static void abd_free_linear(abd_t *abd) { + if (abd_is_linear_page(abd)) { + /* Transform it back into a scatter ABD for freeing */ + struct scatterlist *sg = abd->abd_u.abd_linear.abd_sgl; + abd->abd_flags &= ~ABD_FLAG_LINEAR; + abd->abd_flags &= ~ABD_FLAG_LINEAR_PAGE; + ABD_SCATTER(abd).abd_nents = 1; + ABD_SCATTER(abd).abd_offset = 0; + ABD_SCATTER(abd).abd_sgl = sg; + abd_free_scatter(abd); + return; + } if (abd->abd_flags & ABD_FLAG_META) { zio_buf_free(abd->abd_u.abd_linear.abd_buf, abd->abd_size); } else { @@ -718,7 +745,8 @@ abd_t * abd_alloc_sametype(abd_t *sabd, size_t size) { boolean_t is_metadata = (sabd->abd_flags & ABD_FLAG_META) != 0; - if (abd_is_linear(sabd)) { + if (abd_is_linear(sabd) && + !abd_is_linear_page(sabd)) { return (abd_alloc_linear(size, is_metadata)); } else { return (abd_alloc(size, is_metadata)); @@ -966,6 +994,16 @@ abd_release_ownership_of_buf(abd_t *abd) { ASSERT(abd_is_linear(abd)); ASSERT(abd->abd_flags & ABD_FLAG_OWNER); + + /* + * abd_free() needs to handle LINEAR_PAGE ABD's specially. + * Since that flag does not survive the + * abd_release_ownership_of_buf() -> abd_get_from_buf() -> + * abd_take_ownership_of_buf() sequence, we don't allow releasing + * these "linear but not zio_[data_]buf_alloc()'ed" ABD's. + */ + ASSERT(!abd_is_linear_page(abd)); + abd_verify(abd); abd->abd_flags &= ~ABD_FLAG_OWNER; diff --git a/module/zfs/arc.c b/module/zfs/arc.c index 946ea3415e..c1ffe1f24f 100644 --- a/module/zfs/arc.c +++ b/module/zfs/arc.c @@ -2917,7 +2917,8 @@ arc_buf_alloc_impl(arc_buf_hdr_t *hdr, spa_t *spa, const zbookmark_phys_t *zb, /* * If the hdr's data can be shared then we share the data buffer and * set the appropriate bit in the hdr's b_flags to indicate the hdr is - * allocate a new buffer to store the buf's data. + * sharing it's b_pabd with the arc_buf_t. Otherwise, we allocate a new + * buffer to store the buf's data. * * There are two additional restrictions here because we're sharing * hdr -> buf instead of the usual buf -> hdr. First, the hdr can't be @@ -2925,10 +2926,17 @@ arc_buf_alloc_impl(arc_buf_hdr_t *hdr, spa_t *spa, const zbookmark_phys_t *zb, * an arc_write() then the hdr's data buffer will be released when the * write completes, even though the L2ARC write might still be using it. * Second, the hdr's ABD must be linear so that the buf's user doesn't - * need to be ABD-aware. + * need to be ABD-aware. It must be allocated via + * zio_[data_]buf_alloc(), not as a page, because we need to be able + * to abd_release_ownership_of_buf(), which isn't allowed on "linear + * page" buffers because the ABD code needs to handle freeing them + * specially. */ - boolean_t can_share = arc_can_share(hdr, buf) && !HDR_L2_WRITING(hdr) && - hdr->b_l1hdr.b_pabd != NULL && abd_is_linear(hdr->b_l1hdr.b_pabd); + boolean_t can_share = arc_can_share(hdr, buf) && + !HDR_L2_WRITING(hdr) && + hdr->b_l1hdr.b_pabd != NULL && + abd_is_linear(hdr->b_l1hdr.b_pabd) && + !abd_is_linear_page(hdr->b_l1hdr.b_pabd); /* Set up b_data and sharing */ if (can_share) { @@ -3731,7 +3739,6 @@ arc_alloc_compressed_buf(spa_t *spa, void *tag, uint64_t psize, uint64_t lsize, * disk, it's easiest if we just set up sharing between the * buf and the hdr. */ - ASSERT(!abd_is_linear(hdr->b_l1hdr.b_pabd)); arc_hdr_free_abd(hdr, B_FALSE); arc_share_buf(hdr, buf); } diff --git a/module/zfs/zio.c b/module/zfs/zio.c index 016ac07eab..80a2dbc823 100644 --- a/module/zfs/zio.c +++ b/module/zfs/zio.c @@ -331,12 +331,6 @@ zio_push_transform(zio_t *zio, abd_t *data, uint64_t size, uint64_t bufsize, { zio_transform_t *zt = kmem_alloc(sizeof (zio_transform_t), KM_SLEEP); - /* - * Ensure that anyone expecting this zio to contain a linear ABD isn't - * going to get a nasty surprise when they try to access the data. - */ - IMPLY(abd_is_linear(zio->io_abd), abd_is_linear(data)); - zt->zt_orig_abd = zio->io_abd; zt->zt_orig_size = zio->io_size; zt->zt_bufsize = bufsize;