Cancel TRIM / initialize on FAULTED non-writeable vdevs

When a device which is actively trimming or initializing becomes
FAULTED, and therefore no longer writable, cancel the active
TRIM or initialization.  When the device is merely taken offline
with `zpool offline` then stop the operation but do not cancel it.
When the device is brought back online the operation will be
resumed if possible.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Vipin Kumar Verma <vipin.verma@hpe.com>
Signed-off-by: Srikanth N S <srikanth.nagasubbaraoseetharaman@hpe.com>
Closes #11588
This commit is contained in:
nssrikanth 2021-03-02 23:57:27 +05:30 committed by Tony Hutter
parent 43dbfa3921
commit 26cb87d22d
7 changed files with 144 additions and 6 deletions

View File

@ -536,8 +536,14 @@ vdev_initialize_thread(void *arg)
vd->vdev_initialize_tree = NULL; vd->vdev_initialize_tree = NULL;
mutex_enter(&vd->vdev_initialize_lock); mutex_enter(&vd->vdev_initialize_lock);
if (!vd->vdev_initialize_exit_wanted && vdev_writeable(vd)) { if (!vd->vdev_initialize_exit_wanted) {
vdev_initialize_change_state(vd, VDEV_INITIALIZE_COMPLETE); if (vdev_writeable(vd)) {
vdev_initialize_change_state(vd,
VDEV_INITIALIZE_COMPLETE);
} else if (vd->vdev_faulted) {
vdev_initialize_change_state(vd,
VDEV_INITIALIZE_CANCELED);
}
} }
ASSERT(vd->vdev_initialize_thread != NULL || ASSERT(vd->vdev_initialize_thread != NULL ||
vd->vdev_initialize_inflight == 0); vd->vdev_initialize_inflight == 0);

View File

@ -22,6 +22,7 @@
/* /*
* Copyright (c) 2016 by Delphix. All rights reserved. * Copyright (c) 2016 by Delphix. All rights reserved.
* Copyright (c) 2019 by Lawrence Livermore National Security, LLC. * Copyright (c) 2019 by Lawrence Livermore National Security, LLC.
* Copyright (c) 2021 Hewlett Packard Enterprise Development LP
*/ */
#include <sys/spa.h> #include <sys/spa.h>
@ -911,10 +912,16 @@ vdev_trim_thread(void *arg)
range_tree_destroy(ta.trim_tree); range_tree_destroy(ta.trim_tree);
mutex_enter(&vd->vdev_trim_lock); mutex_enter(&vd->vdev_trim_lock);
if (!vd->vdev_trim_exit_wanted && vdev_writeable(vd)) { if (!vd->vdev_trim_exit_wanted) {
vdev_trim_change_state(vd, VDEV_TRIM_COMPLETE, if (vdev_writeable(vd)) {
vd->vdev_trim_rate, vd->vdev_trim_partial, vdev_trim_change_state(vd, VDEV_TRIM_COMPLETE,
vd->vdev_trim_secure); vd->vdev_trim_rate, vd->vdev_trim_partial,
vd->vdev_trim_secure);
} else if (vd->vdev_faulted) {
vdev_trim_change_state(vd, VDEV_TRIM_CANCELED,
vd->vdev_trim_rate, vd->vdev_trim_partial,
vd->vdev_trim_secure);
}
} }
ASSERT(vd->vdev_trim_thread != NULL || vd->vdev_trim_inflight[0] == 0); ASSERT(vd->vdev_trim_thread != NULL || vd->vdev_trim_inflight[0] == 0);

View File

@ -410,6 +410,7 @@ tags = ['functional', 'cli_root', 'zpool_labelclear']
[tests/functional/cli_root/zpool_initialize] [tests/functional/cli_root/zpool_initialize]
tests = ['zpool_initialize_attach_detach_add_remove', tests = ['zpool_initialize_attach_detach_add_remove',
'zpool_initialize_fault_export_import_online',
'zpool_initialize_import_export', 'zpool_initialize_import_export',
'zpool_initialize_offline_export_import_online', 'zpool_initialize_offline_export_import_online',
'zpool_initialize_online_offline', 'zpool_initialize_online_offline',
@ -474,6 +475,7 @@ tags = ['functional', 'cli_root', 'zpool_sync']
[tests/functional/cli_root/zpool_trim] [tests/functional/cli_root/zpool_trim]
tests = ['zpool_trim_attach_detach_add_remove', tests = ['zpool_trim_attach_detach_add_remove',
'zpool_trim_fault_export_import_online',
'zpool_trim_import_export', 'zpool_trim_multiple', 'zpool_trim_neg', 'zpool_trim_import_export', 'zpool_trim_multiple', 'zpool_trim_neg',
'zpool_trim_offline_export_import_online', 'zpool_trim_online_offline', 'zpool_trim_offline_export_import_online', 'zpool_trim_online_offline',
'zpool_trim_partial', 'zpool_trim_rate', 'zpool_trim_rate_neg', 'zpool_trim_partial', 'zpool_trim_rate', 'zpool_trim_rate_neg',

View File

@ -2,6 +2,7 @@ pkgdatadir = $(datadir)/@PACKAGE@/zfs-tests/tests/functional/cli_root/zpool_init
dist_pkgdata_SCRIPTS = \ dist_pkgdata_SCRIPTS = \
cleanup.ksh \ cleanup.ksh \
zpool_initialize_attach_detach_add_remove.ksh \ zpool_initialize_attach_detach_add_remove.ksh \
zpool_initialize_fault_export_import_online.ksh \
zpool_initialize_import_export.ksh \ zpool_initialize_import_export.ksh \
zpool_initialize_offline_export_import_online.ksh \ zpool_initialize_offline_export_import_online.ksh \
zpool_initialize_online_offline.ksh \ zpool_initialize_online_offline.ksh \

View File

@ -0,0 +1,59 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2021 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_initialize/zpool_initialize.kshlib
#
# DESCRIPTION:
# Miscellaneous complex sequences of operations function as expected.
#
# STRATEGY:
# 1. Create a pool with a two-way mirror.
# 2. Start initializing, fault, export, import, online and verify along
# the way that the initializing was cancelled and not restarted.
#
DISK1="$(echo $DISKS | cut -d' ' -f1)"
DISK2="$(echo $DISKS | cut -d' ' -f2)"
log_must zpool create -f $TESTPOOL mirror $DISK1 $DISK2
log_must zpool initialize $TESTPOOL $DISK1
progress="$(initialize_progress $TESTPOOL $DISK1)"
[[ -z "$progress" ]] && log_fail "Initializing did not start"
log_must zpool offline -f $TESTPOOL $DISK1
log_must check_vdev_state $TESTPOOL $DISK1 "FAULTED"
log_must eval "zpool status -i $TESTPOOL | grep $DISK1 | grep uninitialized"
log_must zpool export $TESTPOOL
log_must zpool import $TESTPOOL
log_must check_vdev_state $TESTPOOL $DISK1 "FAULTED"
log_must eval "zpool status -i $TESTPOOL | grep $DISK1 | grep uninitialized"
log_must zpool online $TESTPOOL $DISK1
log_must zpool clear $TESTPOOL $DISK1
log_must check_vdev_state $TESTPOOL $DISK1 "ONLINE"
log_must eval "zpool status -i $TESTPOOL | grep $DISK1 | grep uninitialized"
log_pass "Initializing behaves as expected at each step of:" \
"initialize + fault + export + import + online"

View File

@ -3,6 +3,7 @@ dist_pkgdata_SCRIPTS = \
setup.ksh \ setup.ksh \
cleanup.ksh \ cleanup.ksh \
zpool_trim_attach_detach_add_remove.ksh \ zpool_trim_attach_detach_add_remove.ksh \
zpool_trim_fault_export_import_online.ksh \
zpool_trim_import_export.ksh \ zpool_trim_import_export.ksh \
zpool_trim_multiple.ksh \ zpool_trim_multiple.ksh \
zpool_trim_neg.ksh \ zpool_trim_neg.ksh \

View File

@ -0,0 +1,62 @@
#!/bin/ksh -p
#
# CDDL HEADER START
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
# CDDL HEADER END
#
#
# Copyright (c) 2019 by Tim Chase. All rights reserved.
# Copyright (c) 2021 Lawrence Livermore National Security, LLC.
#
. $STF_SUITE/include/libtest.shlib
. $STF_SUITE/tests/functional/cli_root/zpool_trim/zpool_trim.kshlib
#
# DESCRIPTION:
# Miscellaneous complex sequences of operations function as expected.
#
# STRATEGY:
# 1. Create a pool with a two-way mirror.
# 2. Start trimming, fault, export, import, online and verify along
# the way that the trim was cancelled and not restarted.
#
DISK1="$(echo $DISKS | cut -d' ' -f1)"
DISK2="$(echo $DISKS | cut -d' ' -f2)"
log_must zpool create -f $TESTPOOL mirror $DISK1 $DISK2
log_must zpool trim -r 128M $TESTPOOL $DISK1
progress="$(trim_progress $TESTPOOL $DISK1)"
[[ -z "$progress" ]] && log_fail "Trimming did not start"
log_must zpool offline -f $TESTPOOL $DISK1
log_must check_vdev_state $TESTPOOL $DISK1 "FAULTED"
log_must eval "zpool status -t $TESTPOOL | grep $DISK1 | grep untrimmed"
log_must zpool export $TESTPOOL
log_must zpool import $TESTPOOL
# Note: the expected state here is unsupported since the faulted device
# cannot be checked to determine if it supports TRIM.
log_must check_vdev_state $TESTPOOL $DISK1 "FAULTED"
log_must eval "zpool status -t $TESTPOOL | grep $DISK1 | grep unsupported"
log_must zpool online $TESTPOOL $DISK1
log_must zpool clear $TESTPOOL $DISK1
log_must check_vdev_state $TESTPOOL $DISK1 "ONLINE"
log_must eval "zpool status -t $TESTPOOL | grep $DISK1 | grep untrimmed"
log_pass "Trimming behaves as expected at each step of:" \
"trim + fault + export + import + online"