diff --git a/AUTHORS b/AUTHORS deleted file mode 100644 index 04ebc204f6..0000000000 --- a/AUTHORS +++ /dev/null @@ -1,4 +0,0 @@ -Brian Behlendorf , -Herb Wartens , -Jim Garlick , -Ricardo M. Correia diff --git a/ChangeLog b/ChangeLog deleted file mode 100644 index 8a74328d6c..0000000000 --- a/ChangeLog +++ /dev/null @@ -1,114 +0,0 @@ -2008-11-19 Brian Behlendorf - - * : Tag zfs-0.4.0 - - * : ZFS project migrated from Subversion which leveraged a - quilt based patch stack to Git and a TopGit managed patch - stack. The new method treats all patches as Git branches - which can be more easily shared for distributed development. - Consult the top level GIT file for detailed information on - how to properly develop for this package using Git+TopGit. - -2008-11-12 Brian Behlendorf - - * : Tag zfs-0.3.4 - - * zfs-07-create-dev-zfs.patch: - Ricardo M. Correia - - Make libzfs create /dev/zfs if it doesn't exist. - - * zfs-05-check-zvol-size.patch: - Ricardo M. Correia - - Properly check zvol size under Linux. - - * zfs-04-no-openat-fdopendir.patch: - Ricardo M. Correia - - Do not use openat() and fdopendir() since they are not available - on older systems. - - * zfs-03-fix-bio-sync.patch: - Ricardo M. Correia - - Fix memory corruption in RHEL4 due to synchronous IO becoming - asynchronous. - -2008-11-06 Brian Behlendorf - - * zfs-02-zpios-fix-stuck-thread-memleak.patch: - Ricardo M. Correia - - Fix stuck threads and memory leaks when errors occur while writing. - - * zfs-01-zpios-arg-corruption.patch: - Ricardo M. Correia - - Fix zpios cmd line argument corruption problem. - - * zfs-00-minor-fixes.patch: - Ricardo M. Correia - - Minor build system improvements - - Minor script improvements - - Create a full copy and not a link tree with quilt - - KPIOS_MAJOR changed from 231 to 232 - - BIO_RW_BARRIER flag removed from IO request - -2008-06-30 Brian Behlendorf - - * : Tag zfs-0.3.3 - - * : Minor script updates and tweaks to be compatible with - the latest version of the SPL. - -2008-06-13 Brian Behlendorf - - * vdev_disk.diff: Replace vdev_disk implementation which was - based on the kmalloc'ed logical address space with a version - which works with vmalloc'ed memory in the virtual address space. - This was done to support the new SPL slab implementation which - is based on virtual addresses to avoid the need for contigeously - allocated memory. - -2008-06-05 Brian Behlendorf - - * arc-vm-integration.diff: Reduce maximum default arc memory - usage to 1/4 of total system memory. Because all the bulk data - is still allocated on the slab memory fragmentation is a serious - concern. To address this in the short term we simply need to - leave lots of free memory. - - * fix-stack.diff: First step towards reducing stack usage so - we can run the full ZFS stack using a stock kernel. - -2008-06-04 Brian Behlendorf - - * : Tag zfs-0.3.2 - - * : Extensive improvements to the build system to detect kernel - API changes so we can flexibly build with a wider range of kernel - versions. The code has now been testing with the 2.6.18-32chaos - and 2.6.25.3-18.fc9 kernels, however we should also be compatible - with other kernels in the range of 2.6.18-2.6.25. The only - remaining issue preventing us from running with a stock - kernel is ZFS stack usage. - -2008-05-21 Brian Behlendorf - - * : Tag zfs-0.3.1 - - * : License headers including URCL added for release. - -2008-05-21 Brian Behlendorf - - * : Tag zfs-0.3.0 - - * configure.ac: Improved autotools support and configurable debug. - -2008-05-15 Brian Behlendorf - - * : Updating original ZFS sources to build 89 which - includes the new write throttling changes plus support - for using ZFS as your root device. Neither of which - will work exactly right without some more work but this - gets us much closers to the latest source. - - -2008-02-28 Brian Behlendorf - - * : First attempt based on SPL module and zfs-lustre sources diff --git a/GIT b/GIT deleted file mode 100644 index eea0b4e6a1..0000000000 --- a/GIT +++ /dev/null @@ -1,186 +0,0 @@ -=========================== WHY USE GIT+TOPGIT? ========================== - -Three major concerns were on our mind when setting up this project. - - o First we needed to structure the project in such a way that it would be - easy to rebase all of our changes on the latest official ZFS release - from Sun. We absolutely need to be able to benefit from the upstream - improvements and not get locked in to an old version of the code base. - - o Secondly, we wanted to be able to easily manage our changes in terms - of a patch stack or graph. This allows us to easily isolate specific - changes and push them upstream for inclusion. It also allows us to - easily update or drop specific changes based on what occurs upstream. - - o Thirdly we needed our DVCS to be integrated with the management of this - patch stack or graph. We have tried other methods in the past such as - SVN+Quilt but have found managing the patch stack becomes cumbersome. - By using Git+TopGit to more tightly integrate our patches in to the repo - we expect several benefits. One of the most important will be the - ability to easily work on the patch's with a distributed development - team, additionally the repo can track patch history, and we can utilize - Git to merge patches and resolve conflicts. - -TopGit is designed to specifically address these concerns by providing -tools to simplify the handling of large numbers of interdependent topic -branches. When using a TopGit aware repo every topic branch represents -a 'patch' and that branch references its dependent branches. The union -of all these branches is your final source base. - -========================= SETTING UP GIT+TOPGIT ========================== - -First off you need to install a Git package on your system. For my -purposes I have been working on a RHEL5 system with git version 1.5.4.5 -installed and it has been working well. You will also need to go get -the latest version of TopGit which likely is not packaged nicely so you -will need to build it from source. You can use Git to clone TopGit -from the official site here and your all set: - - > git clone git://repo.or.cz/w/topgit.git - > make - > make install # Default installs to $(HOME) - -========================== TOPGIT AND ZFS ================================ - -One you have Git and TopGit installed you will want to clone a copy of -the Linux ZFS repo. While this project does not yet have a public home -it hopefully will some day. In the meanwhile if you have VPN access to -LLNL you can clone the latest official repo here. Cloning a TopGit -controlled repo is very similar to cloning a normal Git repo, but you -need to remember to use 'tg remote' to populate all topic branches. - - > git clone http://eris.llnl.gov/git/zfs.git zfs - > cd zfs - > tg remote --populate origin - -Now that you have the Linux ZFS repo the first thing you will probably -want to do is have a look at all the topic branches. TopGit provides -a summary command which shows all the branches and a brief summary for -each branch obtained from the .topmsg files. - - > tg summary - 0 feature-branch [PATCH] feature-branch - feature-commit-cb [PATCH] feature commit cb - feature-zap-cursor-to-key [PATCH] feature zap cursor to key - ... - -By convention all TopGit branches are usually prefixed with 't/', however -I have chosen not to do this for simplicity. A different convention I have -adopted is to tag the top most TopGit branch as 'top' for easy reference. -This provides a consistent label to be used when you need to reference the -branch which contains the union of all topic branches. - -One thing you may also notice about the 'tg summary' command is it does -not show the branches in dependent order. This is done because TopGit allows -each branch to express multiple dependencies as a DAC. Initially this seemed -like an added complication which I planned to avoid by just implementing a -stack using the graph. However, this ended up being problematic because -with a stack when a change was made to a branch near the base, it was a -very expensive operation to merge the change up to the top of the stack. -By defining the dependencies as a graph it is possible to keep the depth -much shallower thus minimizing the merging. It has also proved insightful -as to each patches actual dependencies. - -To see the dependencies you will need to use the --graphviz option and pipe -the result to dot for display. The following command works fairly well for -me. Longer term it would be nice to update this option to use a preferred -config options stored in the repo. - - > tg summary --graphviz | dot -Txlib -Nfontsize=8 - -========================= UPDATING A TOPIC BRANCH ======================== - -Updating a topic branch in TopGit is a pretty straight forward but there -are a few rules you need to be aware of. The basic process involves -checking out the relevant topic branch where the changes need to be made, -making the changes, committing the changes to the branch and then merging -those changes in to dependent branches. TopGit provides some tools to make -this pretty easy, although it may be a little sluggish depending on how many -dependent branches are impacted by the change. Here is an example: - - > git checkout modify-topic-branch # Checkout the proper branch - > ...update branch... # Update the branch - > git commit -a # Commit your changes - > git checkout top # Checkout the top branch - > tg update # Recursively merge in new branch - -Assuming you change does not introduce any conflicts your done. All branches -were dependent on your change will have had the changed merged in. If your -change introduced a conflict you will need to resolve the conflict and then -continue on with the update. - -========================== ADDING A TOPIC BRANCH ========================= - -Adding a topic branch in TopGit can be pretty straight forward. If your -adding a non-conflicting patch in parallel with other patches of the same -type, then things are pretty easy and TopGit does all the work. - - > git co existing-topic-branch # Checkout the branch to add after - > tg create new-topic-branch # Create a new topic branch - > ...update .topmsg... # Update the branch message - > ...create patch... # Update with your changes - > git commit -a # Commit your changes - > git co dependent-topic-branch # Checkout dependent branch - > tg depend add new-topic-branch # Update dependencies - > git checkout top # Checkout the top branch - > tg update # Recursively merge in new branch - -If you need to add your patch in series with another change things are -a little more complicated. In this case TopGit does not yet support removing -dependencies so you will need to do it by hand, as follows. - - > git co existing-topic-branch # Checkout the branch to add after - > tg create new-topic-branch # Create a new topic branch - > ...update .topmsg... # Update the branch message - > ...create patch... # Update with your changes - > git commit -a # Commit your changes - > git co dependent-topic-branch # Checkout dependent branch - > ...update .topdeps... # Manually update dependencies - > git commit -a # Commit your changes - > tg update # TopGit update - > git checkout top # Checkout the top branch - > tg update # Recursively merge in new branch - -Once your done, I find it is a good idea view the repo using the -'tg summary --graphviz' command and verify the updated dependency graph. - -========================= REMOVING A TOPIC BRANCH ======================== - -Removing a topic branch in TopGit is also currently not very easy. To remove -a dependent branch the basic process is to commit a patch which reverts all -changes on the branch. Then that reversion must be merged in to all dependent -branches, the dependencies manually updated and finally the branch removed. -If the branch is not empty you will not be able to remove it. - - > git co delete-topic-branch # Checkout the branch to delete - > tg patch | patch -R -p1 # Revert all branch changes - > git commit -a # Commit your changes - > git checkout top # Checkout the top branch - > tg update # Recursively merge revert - > git co dependent-topic-branch # Checkout dependent branch - > ...update .topdeps... # Manually update dependencies - > git commit -a # Commit your changes - > tg delete delete-topic-branch # Delete empty topic branch - -Once your done, I find it is a good idea view the repo using the -'tg summary --graphviz' command and verify the updated dependency graph. - -============================ TOPGIT TODO ================================= - -TopGit is still a young package which seems to be under active development -by its author. It provides the minimum set of commands needed but there -are clearly areas which simply have not yet been implemented. My short -list of features includes: - - o 'tg summary --deps', option to display a text version of the topic - branch dependency DAC. - - o 'tg depend list', list all topic branch dependencies. - - o 'tg depend delete', cleanly remove a topic branch dependency. - - o 'tg create', cleanly insert a topic branch in the middle - of the graph and properly take care updating all dependencies. - - o 'tg delete', cleanly delete a topic branch in the middle - of the graph and properly take care updating all dependencies. diff --git a/README b/README deleted file mode 100644 index b17c1d83fe..0000000000 --- a/README +++ /dev/null @@ -1,74 +0,0 @@ -============================ ZFS KERNEL BUILD ============================ - -1) Build the SPL (Solaris Porting Layer) module which is designed to - provide many Solaris APIs in the Linux kernel which are needed - by ZFS. To build the SPL: - - tar -xzf spl-x.y.z.tgz - cd spl-x.y.z - ./configure --with-linux= - make - make check - -2) Build ZFS, this port is based on build 89 of ZFS from OpenSolaris. - You will need to have both the kernel and SPL source available. - To build ZFS for use as a Linux kernel module (default): - - tar -xzf zfs-x.y.z.tgz - cd zfs-x.y.z - ./configure --with-linux= \ - --with-spl= - make - make check - -========================= ZFS USER LIBRARY BUILD ========================= - -1) Build ZFS, this port is based on build 89 of ZFS from OpenSolaris. - To build ZFS as a userspace library: - - tar -xzf zfs-x.y.z.tgz - cd zfs-x.y.z - ./configure --zfsconfig=user - make - make check - -============================ ZFS LUSTRE BUILD ============================ - -1) Build the SPL (Solaris Porting Layer) module which is designed to - provide many Solaris APIs in the Linux kernel which are needed - by ZFS. To build the SPL: - - tar -xzf spl-x.y.z.tgz - cd spl-x.y.z - ./configure --with-linux= - make - make check - -2) Build ZFS, this port is based on build 89 of ZFS from OpenSolaris. - To build ZFS as a userspace library for use by a Lustre filesystem: - - tar -xzf zfs-x.y.z.tgz - cd zfs-x.y.z - ./configure --zfsconfig=lustre \ - --with-linux= \ - --with-spl= - make - make check - -3) Provided is an in-kernel test application called kpios which can be - used to simulate a Lustre IO load. It may be used as a stress test - or as a performance to measure your configuration. To simplify testing - there are scripts provided in the scripts/ directory. A single test - can be run as follows: - - WARNING: You MUST update DEVICES in the create-zpool.sh script - to reference the devices you wish to use. - - cd scripts - ./load-zfs.sh # Load the ZFS/SPL module stack - ./create-zpool.sh # Modify DEVICES to list your zpool devices - ./zpios.sh # Modify for your particular kpios test - ./unload-zfs.sh # Unload the ZFS/SPL module stack - -Enjoy, -Brian Behlendorf diff --git a/doc/analysis-spl-0.3.1/zfs-report.doc b/doc/analysis-spl-0.3.1/zfs-report.doc deleted file mode 100644 index 34638b2ead..0000000000 Binary files a/doc/analysis-spl-0.3.1/zfs-report.doc and /dev/null differ diff --git a/doc/analysis-spl-0.3.1/zfs-report.odt b/doc/analysis-spl-0.3.1/zfs-report.odt deleted file mode 100644 index fd52861136..0000000000 Binary files a/doc/analysis-spl-0.3.1/zfs-report.odt and /dev/null differ diff --git a/doc/analysis-spl-0.3.1/zfs-report.pdf b/doc/analysis-spl-0.3.1/zfs-report.pdf deleted file mode 100644 index 8bf166709d..0000000000 Binary files a/doc/analysis-spl-0.3.1/zfs-report.pdf and /dev/null differ diff --git a/doc/analysis-spl-0.3.1/zfs-testing.ods b/doc/analysis-spl-0.3.1/zfs-testing.ods deleted file mode 100644 index 39a84e4377..0000000000 Binary files a/doc/analysis-spl-0.3.1/zfs-testing.ods and /dev/null differ diff --git a/doc/analysis-spl-0.3.1/zfs-testing.xls b/doc/analysis-spl-0.3.1/zfs-testing.xls deleted file mode 100644 index f6de1e9847..0000000000 Binary files a/doc/analysis-spl-0.3.1/zfs-testing.xls and /dev/null differ diff --git a/scripts/check.sh b/scripts/check.sh deleted file mode 100755 index bf93ee564e..0000000000 --- a/scripts/check.sh +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/bash - -prog=check.sh - -die() { - echo "${prog}: $1" >&2 - exit 1 -} - -if [ $(id -u) != 0 ]; then - die "Must run as root" -fi - -./load-zfs.sh || die "" -./unload-zfs.sh || die "" - -exit 0 diff --git a/scripts/create-zpool.sh b/scripts/create-zpool.sh deleted file mode 100755 index 6be37e7881..0000000000 --- a/scripts/create-zpool.sh +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/bash - -prog=create-zpool.sh -. ../.script-config - -# Single disk ilc dev nodes -DEVICES="/dev/sda" - -# All disks in a Thumper config -#DEVICES="/dev/sda /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf \ -# /dev/sdg /dev/sdh /dev/sdi /dev/sdj /dev/sdk /dev/sdl \ -# /dev/sdm /dev/sdn /dev/sdo /dev/sdp /dev/sdq /dev/sdr \ -# /dev/sds /dev/sdt /dev/sdu /dev/sdv /dev/sdw /dev/sdx \ -# /dev/sdy /dev/sdz /dev/sdaa /dev/sdab /dev/sdac /dev/sdad \ -# /dev/sdae /dev/sdaf /dev/sdag /dev/sdah /dev/sdai /dev/sdaj \ -# /dev/sdak /dev/sdal /dev/sdam /dev/sdan /dev/sdao /dev/sdap \ -# /dev/sdaq /dev/sdar /dev/sdas /dev/sdat /dev/sdau /dev/sdav" - -# Sun style disk in Thumper config -#DEVICES="/dev/sda /dev/sdb /dev/sdc \ -# /dev/sdi /dev/sdj /dev/sdk \ -# /dev/sdr /dev/sds /dev/sdt \ -# /dev/sdz /dev/sdaa /dev/sdab" - -# Promise JBOD config (ilc23) -#DEVICES="/dev/sdb /dev/sdc /dev/sdd \ -# /dev/sde /dev/sdf /dev/sdg \ -# /dev/sdh /dev/sdi /dev/sdj \ -# /dev/sdk /dev/sdl /dev/sdm" - -echo -echo "zpool create lustre " -${CMDDIR}/zpool/zpool create -F lustre ${DEVICES} - -echo -echo "zpool list" -${CMDDIR}/zpool/zpool list - -echo -echo "zpool status lustre" -${CMDDIR}/zpool/zpool status lustre - diff --git a/scripts/load-zfs.sh b/scripts/load-zfs.sh deleted file mode 100755 index 6ba111b1d0..0000000000 --- a/scripts/load-zfs.sh +++ /dev/null @@ -1,58 +0,0 @@ -#!/bin/bash - -prog=load-zfs.sh -. ../.script-config - -spl_options=$1 -zpool_options=$2 - -spl_module=${SPLBUILD}/modules/spl/spl.ko -zlib_module=/lib/modules/${KERNELSRCVER}/kernel/lib/zlib_deflate/zlib_deflate.ko -zavl_module=${ZFSBUILD}/lib/libavl/zavl.ko -znvpair_module=${ZFSBUILD}/lib/libnvpair/znvpair.ko -zport_module=${ZFSBUILD}/lib/libport/zport.ko -zcommon_module=${ZFSBUILD}/lib/libzcommon/zcommon.ko -zpool_module=${ZFSBUILD}/lib/libzpool/zpool.ko -zctl_module=${ZFSBUILD}/lib/libdmu-ctl/zctl.ko -zpios_module=${ZFSBUILD}/lib/libzpios/zpios.ko - -die() { - echo "${prog}: $1" >&2 - exit 1 -} - -load_module() { - echo "Loading $1" - /sbin/insmod $* || die "Failed to load $1" -} - -if [ $(id -u) != 0 ]; then - die "Must run as root" -fi - -if /sbin/lsmod | egrep -q "^spl|^zavl|^znvpair|^zport|^zcommon|^zlib_deflate|^zpool"; then - die "Must start with modules unloaded" -fi - -if [ ! -f ${zavl_module} ] || - [ ! -f ${znvpair_module} ] || - [ ! -f ${zport_module} ] || - [ ! -f ${zcommon_module} ] || - [ ! -f ${zpool_module} ]; then - die "Source tree must be built, run 'make'" -fi - -load_module ${spl_module} ${spl_options} -load_module ${zlib_module} -load_module ${zavl_module} -load_module ${znvpair_module} -load_module ${zport_module} -load_module ${zcommon_module} -load_module ${zpool_module} ${zpool_options} -load_module ${zctl_module} -load_module ${zpios_module} - -sleep 1 -echo "Successfully loaded ZFS module stack" - -exit 0 diff --git a/scripts/profile-kpios-disk.sh b/scripts/profile-kpios-disk.sh deleted file mode 100755 index 5d691b8a32..0000000000 --- a/scripts/profile-kpios-disk.sh +++ /dev/null @@ -1,128 +0,0 @@ -#!/bin/bash -# profile-kpios-disk.sh -# -# /proc/diskinfo -# Field 1 -- device name -# Field 2 -- # of reads issued -# Field 3 -- # of reads merged -# Field 4 -- # of sectors read -# Field 5 -- # of milliseconds spent reading -# Field 6 -- # of writes completed -# Field 7 -- # of writes merged -# Field 8 -- # of sectors written -# Field 9 -- # of milliseconds spent writing -# Field 10 -- # of I/Os currently in progress -# Field 11 -- # of milliseconds spent doing I/Os -# Field 12 -- weighted # of milliseconds spent doing I/Os - -RUN_PIDS=${0} -RUN_LOG_DIR=${1} -RUN_ID=${2} - -create_table() { - local FIELD=$1 - local ROW_M=() - local ROW_N=() - local HEADER=1 - local STEP=1 - - for DISK_FILE in `ls -r --sort=time --time=ctime ${RUN_LOG_DIR}/${RUN_ID}/disk-[0-9]*`; do - ROW_M=( ${ROW_N[@]} ) - ROW_N=( `cat ${DISK_FILE} | grep sd | cut -c11- | cut -f${FIELD} -d' ' | tr "\n" "\t"` ) - - if [ $HEADER -eq 1 ]; then - echo -n "step, " - cat ${DISK_FILE} | grep sd | cut -c11- | cut -f1 -d' ' | tr "\n" ", " - echo "total" - HEADER=0 - fi - - if [ ${#ROW_M[@]} -eq 0 ]; then - continue - fi - - if [ ${#ROW_M[@]} -ne ${#ROW_N[@]} ]; then - echo "Badly formatted profile data in ${DISK_FILE}" - break - fi - - TOTAL=0 - echo -n "${STEP}, " - for (( i=0; i<${#ROW_N[@]}; i++ )); do - DELTA=`echo "${ROW_N[${i}]}-${ROW_M[${i}]}" | bc` - let TOTAL=${TOTAL}+${DELTA} - echo -n "${DELTA}, " - done - echo "${TOTAL}, " - - let STEP=${STEP}+1 - done -} - -create_table_mbs() { - local FIELD=$1 - local TIME=$2 - local ROW_M=() - local ROW_N=() - local HEADER=1 - local STEP=1 - - for DISK_FILE in `ls -r --sort=time --time=ctime ${RUN_LOG_DIR}/${RUN_ID}/disk-[0-9]*`; do - ROW_M=( ${ROW_N[@]} ) - ROW_N=( `cat ${DISK_FILE} | grep sd | cut -c11- | cut -f${FIELD} -d' ' | tr "\n" "\t"` ) - - if [ $HEADER -eq 1 ]; then - echo -n "step, " - cat ${DISK_FILE} | grep sd | cut -c11- | cut -f1 -d' ' | tr "\n" ", " - echo "total" - HEADER=0 - fi - - if [ ${#ROW_M[@]} -eq 0 ]; then - continue - fi - - if [ ${#ROW_M[@]} -ne ${#ROW_N[@]} ]; then - echo "Badly formatted profile data in ${DISK_FILE}" - break - fi - - TOTAL=0 - echo -n "${STEP}, " - for (( i=0; i<${#ROW_N[@]}; i++ )); do - DELTA=`echo "${ROW_N[${i}]}-${ROW_M[${i}]}" | bc` - MBS=`echo "scale=2; ((${DELTA}*512)/${TIME})/(1024*1024)" | bc` - TOTAL=`echo "scale=2; ${TOTAL}+${MBS}" | bc` - echo -n "${MBS}, " - done - echo "${TOTAL}, " - - let STEP=${STEP}+1 - done -} - -echo -echo "Reads issued per device" -create_table 2 -echo -echo "Reads merged per device" -create_table 3 -echo -echo "Sectors read per device" -create_table 4 -echo "MB/s per device" -create_table_mbs 4 3 - -echo -echo "Writes issued per device" -create_table 6 -echo -echo "Writes merged per device" -create_table 7 -echo -echo "Sectors written per device" -create_table 8 -echo "MB/s per device" -create_table_mbs 8 3 - -exit 0 diff --git a/scripts/profile-kpios-pids.sh b/scripts/profile-kpios-pids.sh deleted file mode 100755 index d3fa10c913..0000000000 --- a/scripts/profile-kpios-pids.sh +++ /dev/null @@ -1,130 +0,0 @@ -#!/bin/bash -# profile-kpios-pids.sh - -RUN_PIDS=${0} -RUN_LOG_DIR=${1} -RUN_ID=${2} - -ROW_M=() -ROW_N=() -ROW_N_SCHED=() -ROW_N_WAIT=() - -HEADER=1 -STEP=1 - -for PID_FILE in `ls -r --sort=time --time=ctime ${RUN_LOG_DIR}/${RUN_ID}/pids-[0-9]*`; do - ROW_M=( ${ROW_N[@]} ) - ROW_N=( 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ) - ROW_N_SCHED=( `cat ${PID_FILE} | cut -f15 -d' ' | tr "\n" "\t"` ) - ROW_N_WAIT=( `cat ${PID_FILE} | cut -f17 -d' ' | tr "\n" "\t"` ) - ROW_N_NAMES=( `cat ${PID_FILE} | cut -f2 -d' ' | cut -f2 -d'(' | - cut -f1 -d')' | cut -f1 -d'/' | tr "\n" "\t"` ) - - for (( i=0; i<${#ROW_N_SCHED[@]}; i++ )); do - SUM=`echo "${ROW_N_WAIT[${i}]}+${ROW_N_SCHED[${i}]}" | bc` - - case ${ROW_N_NAMES[${i}]} in - zio_taskq) IDX=0;; - zio_req_nul) IDX=1;; - zio_irq_nul) IDX=2;; - zio_req_rd) IDX=3;; - zio_irq_rd) IDX=4;; - zio_req_wr) IDX=5;; - zio_irq_wr) IDX=6;; - zio_req_fr) IDX=7;; - zio_irq_fr) IDX=8;; - zio_req_cm) IDX=9;; - zio_irq_cm) IDX=10;; - zio_req_ctl) IDX=11;; - zio_irq_ctl) IDX=12;; - txg_quiesce) IDX=13;; - txg_sync) IDX=14;; - txg_timelimit) IDX=15;; - arc_reclaim) IDX=16;; - l2arc_feed) IDX=17;; - kpios_io) IDX=18;; - *) continue;; - esac - - let ROW_N[${IDX}]=${ROW_N[${IDX}]}+${SUM} - done - - if [ $HEADER -eq 1 ]; then - echo "step, zio_taskq, zio_req_nul, zio_irq_nul, " \ - "zio_req_rd, zio_irq_rd, zio_req_wr, zio_irq_wr, " \ - "zio_req_fr, zio_irq_fr, zio_req_cm, zio_irq_cm, " \ - "zio_req_ctl, zio_irq_ctl, txg_quiesce, txg_sync, " \ - "txg_timelimit, arc_reclaim, l2arc_feed, kpios_io, " \ - "idle" - HEADER=0 - fi - - if [ ${#ROW_M[@]} -eq 0 ]; then - continue - fi - - if [ ${#ROW_M[@]} -ne ${#ROW_N[@]} ]; then - echo "Badly formatted profile data in ${PID_FILE}" - break - fi - - # Original values are in jiffies and we expect HZ to be 1000 - # on most 2.6 systems thus we divide by 10 to get a percentage. - IDLE=1000 - echo -n "${STEP}, " - for (( i=0; i<${#ROW_N[@]}; i++ )); do - DELTA=`echo "${ROW_N[${i}]}-${ROW_M[${i}]}" | bc` - DELTA_PERCENT=`echo "scale=1; ${DELTA}/10" | bc` - let IDLE=${IDLE}-${DELTA} - echo -n "${DELTA_PERCENT}, " - done - ILDE_PERCENT=`echo "scale=1; ${IDLE}/10" | bc` - echo "${ILDE_PERCENT}" - - let STEP=${STEP}+1 -done - -exit - -echo -echo "Percent of total system time per pid" -for PID_FILE in `ls -r --sort=time --time=ctime ${RUN_LOG_DIR}/${RUN_ID}/pids-[0-9]*`; do - ROW_M=( ${ROW_N[@]} ) - ROW_N_SCHED=( `cat ${PID_FILE} | cut -f15 -d' ' | tr "\n" "\t"` ) - ROW_N_WAIT=( `cat ${PID_FILE} | cut -f17 -d' ' | tr "\n" "\t"` ) - - for (( i=0; i<${#ROW_N_SCHED[@]}; i++ )); do - ROW_N[${i}]=`echo "${ROW_N_WAIT[${i}]}+${ROW_N_SCHED[${i}]}" | bc` - done - - if [ $HEADER -eq 1 ]; then - echo -n "step, " - cat ${PID_FILE} | cut -f2 -d' ' | tr "\n" ", " - echo - HEADER=0 - fi - - if [ ${#ROW_M[@]} -eq 0 ]; then - continue - fi - - if [ ${#ROW_M[@]} -ne ${#ROW_N[@]} ]; then - echo "Badly formatted profile data in ${PID_FILE}" - break - fi - - # Original values are in jiffies and we expect HZ to be 1000 - # on most 2.6 systems thus we divide by 10 to get a percentage. - echo -n "${STEP}, " - for (( i=0; i<${#ROW_N[@]}; i++ )); do - DELTA=`echo "scale=1; (${ROW_N[${i}]}-${ROW_M[${i}]})/10" | bc` - echo -n "${DELTA}, " - done - - echo - let STEP=${STEP}+1 -done - - -exit 0 diff --git a/scripts/profile-kpios-post.sh b/scripts/profile-kpios-post.sh deleted file mode 100755 index 74c0890a8a..0000000000 --- a/scripts/profile-kpios-post.sh +++ /dev/null @@ -1,67 +0,0 @@ -#!/bin/bash - -prog=profile-kpios-post.sh -. ../.script-config - -RUN_POST=${0} -RUN_PHASE=${1} -RUN_LOG_DIR=${2} -RUN_ID=${3} -RUN_POOL=${4} -RUN_CHUNK_SIZE=${5} -RUN_REGION_SIZE=${6} -RUN_THREAD_COUNT=${7} -RUN_REGION_COUNT=${8} -RUN_OFFSET=${9} -RUN_REGION_NOISE=${10} -RUN_CHUNK_NOISE=${11} -RUN_THREAD_DELAY=${12} -RUN_FLAGS=${13} -RUN_RESULT=${14} - -PROFILE_KPIOS_PIDS_BIN=/home/behlendo/src/zfs/scripts/profile-kpios-pids.sh -PROFILE_KPIOS_PIDS_LOG=${RUN_LOG_DIR}/${RUN_ID}/pids-summary.csv - -PROFILE_KPIOS_DISK_BIN=/home/behlendo/src/zfs/scripts/profile-kpios-disk.sh -PROFILE_KPIOS_DISK_LOG=${RUN_LOG_DIR}/${RUN_ID}/disk-summary.csv - -PROFILE_KPIOS_ARC_LOG=${RUN_LOG_DIR}/${RUN_ID}/arcstats -PROFILE_KPIOS_VDEV_LOG=${RUN_LOG_DIR}/${RUN_ID}/vdev_cache_stats - -KERNEL_BIN="/lib/modules/`uname -r`/kernel/" -SPL_BIN="${SPLBUILD}/modules/spl/" -ZFS_BIN="${ZFSBUILD}/lib/" - -OPROFILE_SHORT_ARGS="-a -g -l -p ${KERNEL_BIN},${SPL_BIN},${ZFS_BIN}" -OPROFILE_LONG_ARGS="-d -a -g -l -p ${KERNEL_BIN},${SPL_BIN},${ZFS_BIN}" - -OPROFILE_LOG=${RUN_LOG_DIR}/${RUN_ID}/oprofile.txt -OPROFILE_SHORT_LOG=${RUN_LOG_DIR}/${RUN_ID}/oprofile-short.txt -OPROFILE_LONG_LOG=${RUN_LOG_DIR}/${RUN_ID}/oprofile-long.txt -PROFILE_PID=${RUN_LOG_DIR}/${RUN_ID}/pid - -if [ "${RUN_PHASE}" != "post" ]; then - exit 1 -fi - -# opcontrol --stop >>${OPROFILE_LOG} 2>&1 -# opcontrol --dump >>${OPROFILE_LOG} 2>&1 - -kill -s SIGHUP `cat ${PROFILE_PID}` -rm -f ${PROFILE_PID} - -# opreport ${OPROFILE_SHORT_ARGS} >${OPROFILE_SHORT_LOG} 2>&1 -# opreport ${OPROFILE_LONG_ARGS} >${OPROFILE_LONG_LOG} 2>&1 - -# opcontrol --deinit >>${OPROFILE_LOG} 2>&1 - -cat /proc/spl/kstat/zfs/arcstats >${PROFILE_KPIOS_ARC_LOG} -cat /proc/spl/kstat/zfs/vdev_cache_stats >${PROFILE_KPIOS_VDEV_LOG} - -# Summarize system time per pid -${PROFILE_KPIOS_PIDS_BIN} ${RUN_LOG_DIR} ${RUN_ID} >${PROFILE_KPIOS_PIDS_LOG} - -# Summarize per device performance -${PROFILE_KPIOS_DISK_BIN} ${RUN_LOG_DIR} ${RUN_ID} >${PROFILE_KPIOS_DISK_LOG} - -exit 0 diff --git a/scripts/profile-kpios-pre.sh b/scripts/profile-kpios-pre.sh deleted file mode 100755 index 1a2dcf0221..0000000000 --- a/scripts/profile-kpios-pre.sh +++ /dev/null @@ -1,69 +0,0 @@ -#!/bin/bash -# profile-kpios-pre.sh - -trap "PROFILE_KPIOS_READY=1" SIGHUP - -RUN_PRE=${0} -RUN_PHASE=${1} -RUN_LOG_DIR=${2} -RUN_ID=${3} -RUN_POOL=${4} -RUN_CHUNK_SIZE=${5} -RUN_REGION_SIZE=${6} -RUN_THREAD_COUNT=${7} -RUN_REGION_COUNT=${8} -RUN_OFFSET=${9} -RUN_REGION_NOISE=${10} -RUN_CHUNK_NOISE=${11} -RUN_THREAD_DELAY=${12} -RUN_FLAGS=${13} -RUN_RESULT=${14} - -PROFILE_KPIOS_BIN=/home/behlendo/src/zfs/scripts/profile-kpios.sh -PROFILE_KPIOS_READY=0 - -OPROFILE_LOG=${RUN_LOG_DIR}/${RUN_ID}/oprofile.txt -PROFILE_PID=${RUN_LOG_DIR}/${RUN_ID}/pid -RUN_ARGS=${RUN_LOG_DIR}/${RUN_ID}/args - -if [ "${RUN_PHASE}" != "pre" ]; then - exit 1 -fi - -rm -Rf ${RUN_LOG_DIR}/${RUN_ID}/ -mkdir -p ${RUN_LOG_DIR}/${RUN_ID}/ - -echo "PHASE=${RUN_PHASE}" >>${RUN_ARGS} -echo "LOG_DIR=${RUN_LOG_DIR}" >>${RUN_ARGS} -echo "ID=${RUN_ID}" >>${RUN_ARGS} -echo "POOL=${RUN_POOL}" >>${RUN_ARGS} -echo "CHUNK_SIZE=${RUN_CHUNK_SIZE}" >>${RUN_ARGS} -echo "REGION_SIZE=${RUN_REGION_SIZE}" >>${RUN_ARGS} -echo "THREAD_COUNT=${RUN_THREAD_COUNT}" >>${RUN_ARGS} -echo "REGION_COUNT=${RUN_REGION_COUNT}" >>${RUN_ARGS} -echo "OFFSET=${RUN_OFFSET}" >>${RUN_ARGS} -echo "REGION_NOISE=${RUN_REGION_NOISE}" >>${RUN_ARGS} -echo "CHUNK_NOISE=${RUN_CHUNK_NOISE}" >>${RUN_ARGS} -echo "THREAD_DELAY=${RUN_THREAD_DELAY}" >>${RUN_ARGS} -echo "FLAGS=${RUN_FLAGS}" >>${RUN_ARGS} -echo "RESULT=${RUN_RESULT}" >>${RUN_ARGS} - -# XXX: Oprofile support seems to be broken when I try and start -# it via a user mode helper script, I suspect the setup is failing. -# opcontrol --init >>${OPROFILE_LOG} 2>&1 -# opcontrol --setup --vmlinux=/boot/vmlinux >>${OPROFILE_LOG} 2>&1 - -# Start the profile script -${PROFILE_KPIOS_BIN} ${RUN_PHASE} ${RUN_LOG_DIR} ${RUN_ID} & -echo "$!" >${PROFILE_PID} - -# Sleep waiting for profile script to be ready, it will -# signal us via SIGHUP when it is ready to start profiling. -while [ ${PROFILE_KPIOS_READY} -eq 0 ]; do - sleep 0.1 -done - -# opcontrol --start-daemon >>${OPROFILE_LOG} 2>&1 -# opcontrol --start >>${OPROFILE_LOG} 2>&1 - -exit 0 diff --git a/scripts/profile-kpios.sh b/scripts/profile-kpios.sh deleted file mode 100755 index 88b9343f3e..0000000000 --- a/scripts/profile-kpios.sh +++ /dev/null @@ -1,222 +0,0 @@ -#!/bin/bash -# profile-kpios.sh - -trap "RUN_DONE=1" SIGHUP - -RUN_PHASE=${1} -RUN_LOG_DIR=${2} -RUN_ID=${3} -RUN_DONE=0 - -POLL_INTERVAL=2.99 - -# Log these pids, the exact pid numbers will vary from system to system -# so I harvest pid for all the following type of processes from /proc// -# -# zio_taskq/# -# spa_zio_issue/# -# spa_zio_intr/# -# txg_quiesce_thr -# txg_sync_thread -# txg_timelimit_t -# arc_reclaim_thr -# l2arc_feed_thre -# kpios_io/# - -ZIO_TASKQ_PIDS=() -ZIO_REQ_NUL_PIDS=() -ZIO_IRQ_NUL_PIDS=() -ZIO_REQ_RD_PIDS=() -ZIO_IRQ_RD_PIDS=() -ZIO_REQ_WR_PIDS=() -ZIO_IRQ_WR_PIDS=() -ZIO_REQ_FR_PIDS=() -ZIO_IRQ_FR_PIDS=() -ZIO_REQ_CM_PIDS=() -ZIO_IRQ_CM_PIDS=() -ZIO_REQ_CTL_PIDS=() -ZIO_IRQ_CTL_PIDS=() - -TXG_QUIESCE_PIDS=() -TXG_SYNC_PIDS=() -TXG_TIMELIMIT_PIDS=() - -ARC_RECLAIM_PIDS=() -L2ARC_FEED_PIDS=() - -KPIOS_IO_PIDS=() - -show_pids() { - echo "* zio_taskq: { ${ZIO_TASKQ_PIDS[@]} } = ${#ZIO_TASKQ_PIDS[@]}" - echo "* zio_req_nul: { ${ZIO_REQ_NUL_PIDS[@]} } = ${#ZIO_REQ_NUL_PIDS[@]}" - echo "* zio_irq_nul: { ${ZIO_IRQ_NUL_PIDS[@]} } = ${#ZIO_IRQ_NUL_PIDS[@]}" - echo "* zio_req_rd: { ${ZIO_REQ_RD_PIDS[@]} } = ${#ZIO_REQ_RD_PIDS[@]}" - echo "* zio_irq_rd: { ${ZIO_IRQ_RD_PIDS[@]} } = ${#ZIO_IRQ_RD_PIDS[@]}" - echo "* zio_req_wr: { ${ZIO_REQ_WR_PIDS[@]} } = ${#ZIO_REQ_WR_PIDS[@]}" - echo "* zio_irq_wr: { ${ZIO_IRQ_WR_PIDS[@]} } = ${#ZIO_IRQ_WR_PIDS[@]}" - echo "* zio_req_fr: { ${ZIO_REQ_FR_PIDS[@]} } = ${#ZIO_REQ_FR_PIDS[@]}" - echo "* zio_irq_fr: { ${ZIO_IRQ_FR_PIDS[@]} } = ${#ZIO_IRQ_FR_PIDS[@]}" - echo "* zio_req_cm: { ${ZIO_REQ_CM_PIDS[@]} } = ${#ZIO_REQ_CM_PIDS[@]}" - echo "* zio_irq_cm: { ${ZIO_IRQ_CM_PIDS[@]} } = ${#ZIO_IRQ_CM_PIDS[@]}" - echo "* zio_req_ctl: { ${ZIO_REQ_CTL_PIDS[@]} } = ${#ZIO_REQ_CTL_PIDS[@]}" - echo "* zio_irq_ctl: { ${ZIO_IRQ_CTL_PIDS[@]} } = ${#ZIO_IRQ_CTL_PIDS[@]}" - echo "* txg_quiesce: { ${TXG_QUIESCE_PIDS[@]} } = ${#TXG_QUIESCE_PIDS[@]}" - echo "* txg_sync: { ${TXG_SYNC_PIDS[@]} } = ${#TXG_SYNC_PIDS[@]}" - echo "* txg_timelimit: { ${TXG_TIMELIMIT_PIDS[@]} } = ${#TXG_TIMELIMIT_PIDS[@]}" - echo "* arc_reclaim: { ${ARC_RECLAIM_PIDS[@]} } = ${#ARC_RECLAIM_PIDS[@]}" - echo "* l2arc_feed: { ${L2ARC_FEED_PIDS[@]} } = ${#L2ARC_FEED_PIDS[@]}" - echo "* kpios_io: { ${KPIOS_IO_PIDS[@]} } = ${#KPIOS_IO_PIDS[@]}" -} - -check_pid() { - local PID=$1 - local NAME=$2 - local TYPE=$3 - local PIDS=( "$4" ) - local NAME_STRING=`echo ${NAME} | cut -f1 -d'/'` - local NAME_NUMBER=`echo ${NAME} | cut -f2 -d'/'` - - if [ "${NAME_STRING}" == "${TYPE}" ]; then - if [ -n "${NAME_NUMBER}" ]; then - PIDS[${NAME_NUMBER}]=${PID} - else - PIDS[${#PIDS[@]}]=${PID} - - fi - fi - - echo "${PIDS[@]}" -} - -# NOTE: This whole process is crazy slow but it will do for now -aquire_pids() { - echo "--- Aquiring ZFS pids ---" - - for PID in `ls /proc/ | grep [0-9] | sort -n -u`; do - if [ ! -e /proc/${PID}/status ]; then - continue - fi - - NAME=`cat /proc/${PID}/status | head -n1 | cut -f2` - - ZIO_TASKQ_PIDS=( `check_pid ${PID} ${NAME} "zio_taskq" \ - "$(echo "${ZIO_TASKQ_PIDS[@]}")"` ) - - ZIO_REQ_NUL_PIDS=( `check_pid ${PID} ${NAME} "zio_req_nul" \ - "$(echo "${ZIO_REQ_NUL_PIDS[@]}")"` ) - - ZIO_IRQ_NUL_PIDS=( `check_pid ${PID} ${NAME} "zio_irq_nul" \ - "$(echo "${ZIO_IRQ_NUL_PIDS[@]}")"` ) - - ZIO_REQ_RD_PIDS=( `check_pid ${PID} ${NAME} "zio_req_rd" \ - "$(echo "${ZIO_REQ_RD_PIDS[@]}")"` ) - - ZIO_IRQ_RD_PIDS=( `check_pid ${PID} ${NAME} "zio_irq_rd" \ - "$(echo "${ZIO_IRQ_RD_PIDS[@]}")"` ) - - ZIO_REQ_WR_PIDS=( `check_pid ${PID} ${NAME} "zio_req_wr" \ - "$(echo "${ZIO_REQ_WR_PIDS[@]}")"` ) - - ZIO_IRQ_WR_PIDS=( `check_pid ${PID} ${NAME} "zio_irq_wr" \ - "$(echo "${ZIO_IRQ_WR_PIDS[@]}")"` ) - - ZIO_REQ_FR_PIDS=( `check_pid ${PID} ${NAME} "zio_req_fr" \ - "$(echo "${ZIO_REQ_FR_PIDS[@]}")"` ) - - ZIO_IRQ_FR_PIDS=( `check_pid ${PID} ${NAME} "zio_irq_fr" \ - "$(echo "${ZIO_IRQ_FR_PIDS[@]}")"` ) - - ZIO_REQ_CM_PIDS=( `check_pid ${PID} ${NAME} "zio_req_cm" \ - "$(echo "${ZIO_REQ_CM_PIDS[@]}")"` ) - - ZIO_IRQ_CM_PIDS=( `check_pid ${PID} ${NAME} "zio_irq_cm" \ - "$(echo "${ZIO_IRQ_CM_PIDS[@]}")"` ) - - ZIO_REQ_CTL_PIDS=( `check_pid ${PID} ${NAME} "zio_req_ctl" \ - "$(echo "${ZIO_REQ_CTL_PIDS[@]}")"` ) - - ZIO_IRQ_CTL_PIDS=( `check_pid ${PID} ${NAME} "zio_irq_ctl" \ - "$(echo "${ZIO_IRQ_CTL_PIDS[@]}")"` ) - - TXG_QUIESCE_PIDS=( `check_pid ${PID} ${NAME} "txg_quiesce" \ - "$(echo "${TXG_QUIESCE_PIDS[@]}")"` ) - - TXG_SYNC_PIDS=( `check_pid ${PID} ${NAME} "txg_sync" \ - "$(echo "${TXG_SYNC_PIDS[@]}")"` ) - - TXG_TIMELIMIT_PIDS=( `check_pid ${PID} ${NAME} "txg_timelimit" \ - "$(echo "${TXG_TIMELIMIT_PIDS[@]}")"` ) - - ARC_RECLAIM_PIDS=( `check_pid ${PID} ${NAME} "arc_reclaim" \ - "$(echo "${ARC_RECLAIM_PIDS[@]}")"` ) - - L2ARC_FEED_PIDS=( `check_pid ${PID} ${NAME} "l2arc_feed" \ - "$(echo "${L2ARC_FEED_PIDS[@]}")"` ) - done - - # Wait for kpios_io threads to start - kill -s SIGHUP ${PPID} - echo "* Waiting for kpios_io threads to start" - while [ ${RUN_DONE} -eq 0 ]; do - KPIOS_IO_PIDS=( `ps ax | grep kpios_io | grep -v grep | \ - sed 's/^ *//g' | cut -f1 -d' '` ) - if [ ${#KPIOS_IO_PIDS[@]} -gt 0 ]; then - break; - fi - sleep 0.1 - done - - echo "`show_pids`" >${RUN_LOG_DIR}/${RUN_ID}/pids.txt -} - -log_pids() { - echo "--- Logging ZFS profile to ${RUN_LOG_DIR}/${RUN_ID}/ ---" - ALL_PIDS=( ${ZIO_TASKQ_PIDS[@]} \ - ${ZIO_REQ_NUL_PIDS[@]} \ - ${ZIO_IRQ_NUL_PIDS[@]} \ - ${ZIO_REQ_RD_PID[@]} \ - ${ZIO_IRQ_RD_PIDS[@]} \ - ${ZIO_REQ_WR_PIDS[@]} \ - ${ZIO_IRQ_WR_PIDS[@]} \ - ${ZIO_REQ_FR_PIDS[@]} \ - ${ZIO_IRQ_FR_PIDS[@]} \ - ${ZIO_REQ_CM_PIDS[@]} \ - ${ZIO_IRQ_CM_PIDS[@]} \ - ${ZIO_REQ_CTL_PIDS[@]} \ - ${ZIO_IRQ_CTL_PIDS[@]} \ - ${TXG_QUIESCE_PIDS[@]} \ - ${TXG_SYNC_PIDS[@]} \ - ${TXG_TIMELIMIT_PIDS[@]} \ - ${ARC_RECLAIM_PIDS[@]} \ - ${L2ARC_FEED_PIDS[@]} \ - ${KPIOS_IO_PIDS[@]} ) - - while [ ${RUN_DONE} -eq 0 ]; do - NOW=`date +%s.%N` - LOG_PIDS="${RUN_LOG_DIR}/${RUN_ID}/pids-${NOW}" - LOG_DISK="${RUN_LOG_DIR}/${RUN_ID}/disk-${NOW}" - - for PID in "${ALL_PIDS[@]}"; do - if [ -z ${PID} ]; then - continue; - fi - - if [ -e /proc/${PID}/stat ]; then - cat /proc/${PID}/stat | head -n1 >>${LOG_PIDS} - else - echo "<${PID} exited>" >>${LOG_PIDS} - fi - done - - cat /proc/diskstats >${LOG_DISK} - - NOW2=`date +%s.%N` - DELTA=`echo "${POLL_INTERVAL}-(${NOW2}-${NOW})" | bc` - sleep ${DELTA} - done -} - -aquire_pids -log_pids - -exit 0 diff --git a/scripts/survey.sh b/scripts/survey.sh deleted file mode 100755 index 9198a418f3..0000000000 --- a/scripts/survey.sh +++ /dev/null @@ -1,102 +0,0 @@ -#!/bin/bash - -prog=survey.sh -. ../.script-config - -LOG=/home/`whoami`/zpios-logs/`uname -r`/kpios-`date +%Y%m%d`/ -mkdir -p ${LOG} - -# Apply all tunings described below to generate some best case -# numbers for what is acheivable with some more elbow grease. -NAME="prefetch+zerocopy+checksum+pending1024+kmem" -echo "----------------------- ${NAME} ------------------------------" -./zpios.sh \ - "" \ - "zfs_prefetch_disable=1 zfs_vdev_max_pending=1024 zio_bulk_flags=0x100" \ - "--zerocopy" \ - ${LOG}/${NAME}/ \ - "${CMDDIR}/zfs/zfs set checksum=off lustre" | \ - tee ${LOG}/${NAME}.txt - -# Baseline number for an out of the box config with no manual tuning. -# Ideally, we will want things to be automatically tuned and for this -# number to approach the tweaked out results above. -NAME="baseline" -echo "----------------------- ${NAME} ------------------------------" -./zpios.sh \ - "" \ - "" \ - "" \ - ${LOG}/${NAME}/ | \ - tee ${LOG}/${NAME}.txt - -# Disable ZFS's prefetching. For some reason still not clear to me -# current prefetching policy is quite bad for a random workload. -# Allow the algorithm to detect a random workload and not do anything -# may be the way to address this issue. -NAME="prefetch" -echo "----------------------- ${NAME} ------------------------------" -./zpios.sh \ - "" \ - "zfs_prefetch_disable=1" \ - "" \ - ${LOG}/${NAME}/ | \ - tee ${LOG}/${NAME}.txt - -# As expected, simulating a zerocopy IO path improves performance -# by freeing up lots of CPU which is wasted move data between buffers. -NAME="zerocopy" -echo "----------------------- ${NAME} ------------------------------" -./zpios.sh \ - "" \ - "" \ - "--zerocopy" \ - ${LOG}/${NAME}/ | \ - tee ${LOG}/${NAME}.txt - -# Disabling checksumming should show some (if small) improvement -# simply due to freeing up a modest amount of CPU. -NAME="checksum" -echo "----------------------- ${NAME} ------------------------------" -./zpios.sh \ - "" \ - "" \ - "" \ - ${LOG}/${NAME}/ \ - "${CMDDIR}/zfs/zfs set checksum=off lustre" | \ - tee ${LOG}/${NAME}.txt - -# Increasing the pending IO depth also seems to improve things likely -# at the expense of latency. This should be exported more because I'm -# seeing a much bigger impact there that I would have expected. There -# may be some low hanging fruit to be found here. -NAME="pending" -echo "----------------------- ${NAME} ------------------------------" -./zpios.sh \ - "" \ - "zfs_vdev_max_pending=1024" \ - "" \ - ${LOG}/${NAME}/ | \ - tee ${LOG}/${NAME}.txt - -# To avoid memory fragmentation issues our slab implementation can be -# based on a virtual address space. Interestingly, we take a pretty -# substantial performance penalty for this somewhere in the low level -# IO drivers. If we back the slab with kmem pages we see far better -# read performance numbers at the cost of memory fragmention and general -# system instability due to large allocations. This may be because of -# an optimization in the low level drivers due to the contigeous kmem -# based memory. This needs to be explained. The good news here is that -# with zerocopy interfaces added at the DMU layer we could gaurentee -# kmem based memory for a pool of pages. -# -# 0x100 = KMC_KMEM - Force kmem_* based slab -# 0x200 = KMC_VMEM - Force vmem_* based slab -NAME="kmem" -echo "----------------------- ${NAME} ------------------------------" -./zpios.sh \ - "" \ - "zio_bulk_flags=0x100" \ - "" \ - ${LOG}/${NAME}/ | \ - tee ${LOG}/${NAME}.txt diff --git a/scripts/unload-zfs.sh b/scripts/unload-zfs.sh deleted file mode 100755 index 12e987bd3f..0000000000 --- a/scripts/unload-zfs.sh +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash - -prog=unload-zfs.sh -. ../.script-config - -spl_module=${SPLBUILD}/modules/spl/spl.ko -zlib_module=/lib/modules/${KERNELSRCVER}/kernel/lib/zlib_deflate/zlib_deflate.ko -zavl_module=${ZFSBUILD}/lib/libavl/zavl.ko -znvpair_module=${ZFSBUILD}/lib/libnvpair/znvpair.ko -zport_module=${ZFSBUILD}/lib/libport/zport.ko -zcommon_module=${ZFSBUILD}/lib/libzcommon/zcommon.ko -zpool_module=${ZFSBUILD}/lib/libzpool/zpool.ko -zctl_module=${ZFSBUILD}/lib/libdmu-ctl/zctl.ko -zpios_module=${ZFSBUILD}/lib/libzpios/zpios.ko - -die() { - echo "${prog}: $1" >&2 - exit 1 -} - -unload_module() { - echo "Unloading $1" - /sbin/rmmod $1 || die "Failed to unload $1" -} - -if [ $(id -u) != 0 ]; then - die "Must run as root" -fi - -unload_module ${zpios_module} -unload_module ${zctl_module} -unload_module ${zpool_module} -unload_module ${zcommon_module} -unload_module ${zport_module} -unload_module ${znvpair_module} -unload_module ${zavl_module} -unload_module ${zlib_module} - -# Set DUMP=1 to generate debug logs on unload -if [ -n "${DUMP}" ]; then - sysctl -w kernel.spl.debug.dump=1 - # This is racy, I don't like it, but for a helper script it will do. - SPL_LOG=`dmesg | tail -n 1 | cut -f5 -d' '` - ${SPLBUILD}/cmd/spl ${SPL_LOG} >${SPL_LOG}.log - echo - echo "Dumped debug log: ${SPL_LOG}.log" - tail -n1 ${SPL_LOG}.log - echo -fi - -unload_module ${spl_module} - -echo "Successfully unloaded ZFS module stack" - -exit 0 diff --git a/scripts/zpios-jbod.sh b/scripts/zpios-jbod.sh deleted file mode 100755 index 4cb960fc23..0000000000 --- a/scripts/zpios-jbod.sh +++ /dev/null @@ -1,110 +0,0 @@ -#!/bin/bash - -prog=zpios-jbod.sh -. ../.script-config - -SPL_OPTIONS=$1 -ZPOOL_OPTIONS=$2 -KPIOS_OPTIONS=$3 -PROFILE_KPIOS_LOGS=$4 -KPIOS_PRE=$5 -KPIOS_POST=$6 - -PROFILE_KPIOS_PRE=/home/behlendo/src/zfs/scripts/profile-kpios-pre.sh -PROFILE_KPIOS_POST=/home/behlendo/src/zfs/scripts/profile-kpios-post.sh - -echo ------------------------- ZFS TEST LOG --------------------------------- -echo -n "Date = "; date -echo -n "Kernel = "; uname -r -echo ------------------------------------------------------------------------ - -echo -./load-zfs.sh "${SPL_OPTIONS}" "${ZPOOL_OPTIONS}" - -sysctl -w kernel.spl.debug.mask=0 -sysctl -w kernel.spl.debug.subsystem=0 - -echo ---------------------- SPL Sysctl Tunings ------------------------------ -sysctl -A | grep spl -echo - -echo ------------------- SPL/ZPOOL Module Tunings --------------------------- -grep [0-9] /sys/module/spl/parameters/* -grep [0-9] /sys/module/zpool/parameters/* -echo - -DEVICES="/dev/sdn /dev/sdo /dev/sdp \ - /dev/sdq /dev/sdr /dev/sds \ - /dev/sdt /dev/sdu /dev/sdv \ - /dev/sdw /dev/sdx /dev/sdy" - -${CMDDIR}/zpool/zpool create -F lustre ${DEVICES} -${CMDDIR}/zpool/zpool status lustre - -if [ -n "${KPIOS_PRE}" ]; then - ${KPIOS_PRE} -fi - -# Usage: zpios -# --chunksize -c =values -# --chunksize_low -a =value -# --chunksize_high -b =value -# --chunksize_incr -g =value -# --offset -o =values -# --offset_low -m =value -# --offset_high -q =value -# --offset_incr -r =value -# --regioncount -n =values -# --regioncount_low -i =value -# --regioncount_high -j =value -# --regioncount_incr -k =value -# --threadcount -t =values -# --threadcount_low -l =value -# --threadcount_high -h =value -# --threadcount_incr -e =value -# --regionsize -s =values -# --regionsize_low -A =value -# --regionsize_high -B =value -# --regionsize_incr -C =value -# --cleanup -x -# --verify -V -# --zerocopy -z -# --threaddelay -T =jiffies -# --regionnoise -I =shift -# --chunknoise -N =bytes -# --prerun -P =pre-command -# --postrun -R =post-command -# --log -G =log directory -# --pool | --path -p =pool name -# --load -L =dmuio -# --help -? =this help -# --verbose -v =increase verbosity -# --threadcount=256,256,256,256,256 \ - -CMD="${CMDDIR}/zpios/zpios \ - --load=dmuio \ - --path=lustre \ - --chunksize=1M \ - --regionsize=4M \ - --regioncount=16384 \ - --threadcount=256 \ - --offset=4M \ - --cleanup \ - --verbose \ - --human-readable \ - ${KPIOS_OPTIONS} \ - --prerun=${PROFILE_KPIOS_PRE} \ - --postrun=${PROFILE_KPIOS_POST} \ - --log=${PROFILE_KPIOS_LOGS}" -echo -date -echo ${CMD} -$CMD -date - -if [ -n "${KPIOS_POST}" ]; then - ${KPIOS_POST} -fi - -${CMDDIR}/zpool/zpool destroy lustre -./unload-zfs.sh diff --git a/scripts/zpios.sh b/scripts/zpios.sh deleted file mode 100755 index 342ecd1f5d..0000000000 --- a/scripts/zpios.sh +++ /dev/null @@ -1,133 +0,0 @@ -#!/bin/bash - -prog=zpios.sh -. ../.script-config - -SPL_OPTIONS="spl_debug_mask=0 spl_debug_subsys=0 ${1}" -ZPOOL_OPTIONS=$2 -KPIOS_OPTIONS=$3 -PROFILE_KPIOS_LOGS=$4 -KPIOS_PRE=$5 -KPIOS_POST=$6 - -PROFILE_KPIOS_PRE=/home/behlendo/src/zfs/scripts/profile-kpios-pre.sh -PROFILE_KPIOS_POST=/home/behlendo/src/zfs/scripts/profile-kpios-post.sh - -DEVICES="/dev/hda" - -echo ------------------------- ZFS TEST LOG --------------------------------- -echo -n "Date = "; date -echo -n "Kernel = "; uname -r -echo ------------------------------------------------------------------------ - -echo -./load-zfs.sh "${SPL_OPTIONS}" "${ZPOOL_OPTIONS}" - -echo ---------------------- SPL Sysctl Tunings ------------------------------ -sysctl -A | grep spl -echo - -echo ------------------- SPL/ZPOOL Module Tunings --------------------------- -if [ -d /sys/module/spl/parameters ]; then - grep [0-9] /sys/module/spl/parameters/* - grep [0-9] /sys/module/zpool/parameters/* -else - grep [0-9] /sys/module/spl/* - grep [0-9] /sys/module/zpool/* -fi -echo - -echo "${CMDDIR}/zpool/zpool create -f lustre ${DEVICES}" -${CMDDIR}/zpool/zpool create -f lustre ${DEVICES} - -echo "${CMDDIR}/zpool/zpool status lustre" -${CMDDIR}/zpool/zpool status lustre - -echo "Waiting for /dev/kpios to come up..." -while [ ! -c /dev/kpios ]; do - sleep 1 -done - -if [ -n "${KPIOS_PRE}" ]; then - ${KPIOS_PRE} -fi - -# Usage: zpios -# --chunksize -c =values -# --chunksize_low -a =value -# --chunksize_high -b =value -# --chunksize_incr -g =value -# --offset -o =values -# --offset_low -m =value -# --offset_high -q =value -# --offset_incr -r =value -# --regioncount -n =values -# --regioncount_low -i =value -# --regioncount_high -j =value -# --regioncount_incr -k =value -# --threadcount -t =values -# --threadcount_low -l =value -# --threadcount_high -h =value -# --threadcount_incr -e =value -# --regionsize -s =values -# --regionsize_low -A =value -# --regionsize_high -B =value -# --regionsize_incr -C =value -# --cleanup -x -# --verify -V -# --zerocopy -z -# --threaddelay -T =jiffies -# --regionnoise -I =shift -# --chunknoise -N =bytes -# --prerun -P =pre-command -# --postrun -R =post-command -# --log -G =log directory -# --pool | --path -p =pool name -# --load -L =dmuio -# --help -? =this help -# --verbose -v =increase verbosity - -# --prerun=${PROFILE_KPIOS_PRE} \ -# --postrun=${PROFILE_KPIOS_POST} \ - -CMD="${CMDDIR}/zpios/zpios \ - --load=dmuio \ - --path=lustre \ - --chunksize=1M \ - --regionsize=4M \ - --regioncount=64 \ - --threadcount=4 \ - --offset=4M \ - --cleanup \ - --verbose \ - --human-readable \ - ${KPIOS_OPTIONS} \ - --log=${PROFILE_KPIOS_LOGS}" -echo -date -echo ${CMD} -$CMD -date - -if [ -n "${KPIOS_POST}" ]; then - ${KPIOS_POST} -fi - -${CMDDIR}/zpool/zpool destroy lustre - -echo ---------------------- SPL Sysctl Tunings ------------------------------ -sysctl -A | grep spl -echo - -echo ------------------------ KSTAT Statistics ------------------------------ -echo ARCSTATS -cat /proc/spl/kstat/zfs/arcstats -echo -echo VDEV_CACHE_STATS -cat /proc/spl/kstat/zfs/vdev_cache_stats -echo -echo SLAB -cat /proc/spl/kmem/slab -echo - -./unload-zfs.sh