Introduce minimal ZIL block commit delay

Despite all optimizations, tests on actual hardware show that FreeBSD
kernel can't sleep for less then ~2us.  Similar tests on Linux show
~50us delay at least from nanosleep() (haven't tested inside kernel).
It means that on very fast log device ZIL may not be able to satisfy
zfs_commit_timeout_pct block commit timeout, increasing log latency
more than desired.

Handle that by introduction of zil_min_commit_timeout parameter,
specifying minimal timeout value where additional delays to aggregate
writes may be skipped.  Also skip delays if the LWB is more than 7/8
full, that often happens if I/O sizes are constant and match one of
LWB sizes.  Both things are applied only if there were no already
outstanding log blocks, that may indicate single-threaded workload,
that by definition can not benefit from the commit delays.

While there, add short time moving average to zl_last_lwb_latency to
make it more stable.

Tests of single-threaded 4KB writes to NVDIMM SLOG on FreeBSD show IOPS
increase by 9% instead of expected 5%.  For zfs_commit_timeout_pct of
1 there IOPS increase by 5.5% instead of expected 1%.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes #14418
This commit is contained in:
Alexander Motin 2023-01-24 12:20:32 -05:00 committed by GitHub
parent 037e4f2536
commit 0f740a4f1d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 41 additions and 2 deletions

View File

@ -2209,6 +2209,13 @@ On very fragmented pools, lowering this
.Pq typically to Sy 36 KiB
can improve performance.
.
.It Sy zil_min_commit_timeout Ns = Ns Sy 5000 Pq u64
This sets the minimum delay in nanoseconds ZIL care to delay block commit,
waiting for more records.
If ZIL writes are too fast, kernel may not be able sleep for so short interval,
increasing log latency above allowed by
.Sy zfs_commit_timeout_pct .
.
.It Sy zil_nocacheflush Ns = Ns Sy 0 Ns | Ns 1 Pq int
Disable the cache flush commands that are normally sent to disk by
the ZIL after an LWB write has completed.

View File

@ -92,6 +92,14 @@
*/
static uint_t zfs_commit_timeout_pct = 5;
/*
* Minimal time we care to delay commit waiting for more ZIL records.
* At least FreeBSD kernel can't sleep for less than 2us at its best.
* So requests to sleep for less then 5us is a waste of CPU time with
* a risk of significant log latency increase due to oversleep.
*/
static uint64_t zil_min_commit_timeout = 5000;
/*
* See zil.h for more information about these fields.
*/
@ -1295,7 +1303,8 @@ zil_lwb_flush_vdevs_done(zio_t *zio)
lwb->lwb_buf = NULL;
ASSERT3U(lwb->lwb_issued_timestamp, >, 0);
zilog->zl_last_lwb_latency = gethrtime() - lwb->lwb_issued_timestamp;
zilog->zl_last_lwb_latency = (zilog->zl_last_lwb_latency * 3 +
gethrtime() - lwb->lwb_issued_timestamp) / 4;
lwb->lwb_root_zio = NULL;
@ -2463,8 +2472,9 @@ zil_process_commit_list(zilog_t *zilog)
spa_t *spa = zilog->zl_spa;
list_t nolwb_itxs;
list_t nolwb_waiters;
lwb_t *lwb;
lwb_t *lwb, *plwb;
itx_t *itx;
boolean_t first = B_TRUE;
ASSERT(MUTEX_HELD(&zilog->zl_issuer_lock));
@ -2491,6 +2501,9 @@ zil_process_commit_list(zilog_t *zilog)
ASSERT3S(lwb->lwb_state, !=, LWB_STATE_ISSUED);
ASSERT3S(lwb->lwb_state, !=, LWB_STATE_WRITE_DONE);
ASSERT3S(lwb->lwb_state, !=, LWB_STATE_FLUSH_DONE);
first = (lwb->lwb_state != LWB_STATE_OPENED) &&
((plwb = list_prev(&zilog->zl_lwb_list, lwb)) == NULL ||
plwb->lwb_state == LWB_STATE_FLUSH_DONE);
}
while ((itx = list_head(&zilog->zl_itx_commit_list)) != NULL) {
@ -2661,7 +2674,23 @@ zil_process_commit_list(zilog_t *zilog)
* try and pack as many itxs into as few lwbs as
* possible, without significantly impacting the latency
* of each individual itx.
*
* If we had no already running or open LWBs, it can be
* the workload is single-threaded. And if the ZIL write
* latency is very small or if the LWB is almost full, it
* may be cheaper to bypass the delay.
*/
if (lwb->lwb_state == LWB_STATE_OPENED && first) {
hrtime_t sleep = zilog->zl_last_lwb_latency *
zfs_commit_timeout_pct / 100;
if (sleep < zil_min_commit_timeout ||
lwb->lwb_sz - lwb->lwb_nused < lwb->lwb_sz / 8) {
lwb = zil_lwb_write_issue(zilog, lwb);
zilog->zl_cur_used = 0;
if (lwb == NULL)
zil_commit_writer_stall(zilog);
}
}
}
}
@ -3949,6 +3978,9 @@ EXPORT_SYMBOL(zil_kstat_values_update);
ZFS_MODULE_PARAM(zfs, zfs_, commit_timeout_pct, UINT, ZMOD_RW,
"ZIL block open timeout percentage");
ZFS_MODULE_PARAM(zfs_zil, zil_, min_commit_timeout, U64, ZMOD_RW,
"Minimum delay we care for ZIL block commit");
ZFS_MODULE_PARAM(zfs_zil, zil_, replay_disable, INT, ZMOD_RW,
"Disable intent logging replay");