73 lines
2.3 KiB
Groff
73 lines
2.3 KiB
Groff
|
.TH vdev_id 8
|
||
|
|
.SH NAME
|
||
|
|
vdev_id \- generate user-friendly names for JBOD disks
|
||
|
|
.SH SYNOPSIS
|
||
|
|
.LP
|
||
|
|
.nf
|
||
|
|
\fBvdev_id\fR <-d dev> [-c config_file] [-g sas_direct|sas_switch]
|
||
|
|
[-m] [-p phys_per_port]
|
||
|
|
\fBvdev_id\fR -h
|
||
|
|
.fi
|
||
|
|
.SH DESCRIPTION
|
||
|
|
The \fBvdev_id\fR command is a udev helper which parses the file
|
||
|
|
.BR /etc/zfs/vdev_id.conf (5)
|
||
|
|
to map a physical path in a storage topology to a channel name. The
|
||
|
|
channel name is combined with a disk enclosure slot number to create an
|
||
|
|
alias that reflects the physical location of the drive. This is
|
||
|
|
particularly helpful when it comes to tasks like replacing failed
|
||
|
|
drives. Slot numbers may also be re-mapped in case the default
|
||
|
|
numbering is unsatisfactory. The drive aliases will be created as
|
||
|
|
symbolic links in /dev/disk/by-vdev.
|
||
|
|
|
||
|
|
The only currently supported topologies are sas_direct and
|
||
|
|
sas_switch. A multipath mode is supported in which dm-mpath
|
||
|
|
devices are handled by examining the first-listed running
|
||
|
|
component disk as reported by the
|
||
|
|
.BR multipath (8)
|
||
|
|
command. In multipath mode the configuration file should contain a
|
||
|
|
channel definition with the same name for each path to a given
|
||
|
|
enclosure.
|
||
|
|
|
||
|
|
.SH OPTIONS
|
||
|
|
.TP
|
||
|
|
\fB\-c\fR <config_file>
|
||
|
|
Specifies the path to an alternate configuration file. The default is
|
||
|
|
/etc/zfs/vdev_id.conf.
|
||
|
|
.TP
|
||
|
|
\fB\-d\fR <device>
|
||
|
|
This is the only mandatory argument. Specifies the name of a device
|
||
|
|
in /dev, i.e. "sda".
|
||
|
|
.TP
|
||
|
|
\fB\-g\fR <sas_direct|sas_switch>
|
||
|
|
Identifies a physical topology that governs how physical paths are
|
||
|
|
mapped to channels.
|
||
|
|
|
||
|
|
\fIsas_direct\fR - in this mode a channel is uniquely identified by
|
||
|
|
a PCI slot and a HBA port number
|
||
|
|
|
||
|
|
\fIsas_switch\fR - in this mode a channel is uniquely identified by
|
||
|
|
a SAS switch port number
|
||
|
|
.TP
|
||
|
|
\fB\-m\fR
|
||
|
|
Specifies that
|
||
|
|
.BR vdev_id (8)
|
||
|
|
will handle only dm-multipath devices. If set to "yes" then
|
||
|
|
.BR vdev_id (8)
|
||
|
|
will examine the first running component disk of a dm-multipath
|
||
|
|
device as listed by the
|
||
|
|
.BR multipath (8)
|
||
|
|
command to determine the physical path.
|
||
|
|
.TP
|
||
|
|
\fB\-p\fR <phys_per_port>
|
||
|
|
Specifies the number of PHY devices associated with a SAS HBA port or SAS
|
||
|
|
switch port.
|
||
|
|
.BR vdev_id (8)
|
||
|
|
internally uses this value to determine which HBA or switch port a
|
||
|
|
device is connected to. The default is 4.
|
||
|
|
.TP
|
||
|
|
\fB\-h\fR
|
||
|
|
Print a usage summary.
|
||
|
|
.SH SEE ALSO
|
||
|
|
.LP
|
||
|
|
\fBvdev_id.conf\fR(5)
|