Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/cmd/zed/Makefile.am

55 lines
1.1 KiB
Makefile
Raw Normal View History

Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
include $(top_srcdir)/config/Rules.am
Turn shellcheck into a normal make target. Fix new files it caught This checks every file it checked (and a few more), but explicitly instead of "if it works it works" best-effort (which wasn't that good anyway) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #10512 Closes #12101
2021-05-21 21:43:38 +00:00
include $(top_srcdir)/config/Shellcheck.am
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
Clean up lib dependencies libzutil is currently statically linked into libzfs, libzfs_core and libzpool. Avoid the unnecessary duplication by removing it from libzfs and libzpool, and adding libzfs_core to libzpool. Remove a few unnecessary dependencies: - libuutil from libzfs_core - libtirpc from libspl - keep only libcrypto in libzfs, as we don't use any functions from libssl - librt is only used for clock_gettime, however on modern systems that's in libc rather than librt. Add a configure check to see if we actually need librt - libdl from raidz_test Add a few missing dependencies: - zlib to libefi and libzfs - libuuid to zpool, and libuuid and libudev to zed - libnvpair uses assertions, so add assert.c to provide aok and libspl_assertf Sort the LDADD for programs so that libraries that satisfy dependencies come at the end rather than the beginning of the linker command line. Revamp the configure tests for libaries to use FIND_SYSTEM_LIBRARY instead. This can take advantage of pkg-config, and it also avoids polluting LIBS. List all the required dependencies in the pkgconfig files, and move the one for libzfs_core into the latter's directory. Install pkgconfig files in $(libdir)/pkgconfig on linux and $(prefix)/libdata/pkgconfig on FreeBSD, instead of /usr/share/pkgconfig, as the more correct location for library .pc files. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10538
2020-06-30 17:10:41 +00:00
AM_CFLAGS += $(LIBUDEV_CFLAGS) $(LIBUUID_CFLAGS)
OpenZFS restructuring - libspl Factor Linux specific pieces out of libspl. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #9336
2019-10-02 17:39:48 +00:00
SUBDIRS = zed.d
Turn shellcheck into a normal make target. Fix new files it caught This checks every file it checked (and a few more), but explicitly instead of "if it works it works" best-effort (which wasn't that good anyway) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #10512 Closes #12101
2021-05-21 21:43:38 +00:00
SHELLCHECKDIRS = $(SUBDIRS)
Add ShellCheck's `--enable=all` inside `cmd/` The only exception is `cmd/vdev_id/vdev_id` which might be a subject of refactoring (see #12084) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Signed-off-by: szubersk <szuberskidamian@gmail.com> Closes #12912
2022-01-07 00:07:54 +00:00
SHELLCHECK_OPTS = --enable=all
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
sbin_PROGRAMS = zed
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
ZED_SRC = \
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
zed.c \
zed.h \
zed_conf.c \
zed_conf.h \
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
zed_disk_event.c \
zed_disk_event.h \
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
zed_event.c \
zed_event.h \
zed_exec.c \
zed_exec.h \
zed_file.c \
zed_file.h \
zed_log.c \
zed_log.h \
zed_strings.c \
zed_strings.h
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
FMA_SRC = \
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
agents/zfs_agents.c \
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
agents/zfs_agents.h \
agents/zfs_diagnosis.c \
agents/zfs_mod.c \
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
agents/zfs_retire.c \
agents/fmd_api.c \
agents/fmd_api.h \
agents/fmd_serd.c \
agents/fmd_serd.h
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
zed_SOURCES = $(ZED_SRC) $(FMA_SRC)
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
zed_LDADD = \
Use abs_top_builddir when referencing libraries libtool stores absolute paths in the dependency_libs component of the .la files. If the Makefile for a dependent library refers to the libraries by relative path, some libraries end up duplicated on the link command line. As an example, libzfs specifies libzfs_core, libnvpair and libuutil as dependencies to be linked in. The .la file for libzfs_core also specifies libnvpair, but using an absolute path, with the result that libnvpair is present twice in the linker command line for producing libzfs. While the only thing this causes is to slightly slow down the linking, we can avoid it by using absolute paths everywhere, including for convenience libraries just for consistency. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10538
2020-07-06 20:01:29 +00:00
$(abs_top_builddir)/lib/libzfs/libzfs.la \
$(abs_top_builddir)/lib/libzfs_core/libzfs_core.la \
$(abs_top_builddir)/lib/libnvpair/libnvpair.la \
$(abs_top_builddir)/lib/libuutil/libuutil.la
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
libspl: implement atomics in terms of atomics This replaces the generic libspl atomic.c atomics implementation with one based on builtin gcc atomics. This functionality was added as an experimental feature in gcc 4.4. Today even CentOS 7 ships with gcc 4.8 as the default compiler we can make this the default. Furthermore, the builtin atomics are as good or better than our hand-rolled implementation so it's reasonable to drop that custom code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #11904
2021-04-19 05:13:24 +00:00
zed_LDADD += -lrt $(LIBATOMIC_LIBS) $(LIBUDEV_LIBS) $(LIBUUID_LIBS)
Add libtpool (thread pools) OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6442
2017-08-09 22:31:08 +00:00
zed_LDFLAGS = -pthread
Fixes for make dist Reduce the usage of EXTRA_DIST. If files are conditionally included in _SOURCES, _HEADERS etc, automake is smart enough to dist all files that could possibly be included, but this does not apply to EXTRA_DIST, resulting in make dist depending on the configuration. Add some files that were missing altogether in various Makefile's. The changes to disted files in this commit (excluding deleted files): +./cmd/zed/agents/README.md +./etc/init.d/README.md +./lib/libspl/os/freebsd/getexecname.c +./lib/libspl/os/freebsd/gethostid.c +./lib/libspl/os/freebsd/getmntany.c +./lib/libspl/os/freebsd/mnttab.c -./lib/libzfs/libzfs_core.pc -./lib/libzfs/libzfs.pc +./lib/libzfs/os/freebsd/libzfs_compat.c +./lib/libzfs/os/freebsd/libzfs_fsshare.c +./lib/libzfs/os/freebsd/libzfs_ioctl_compat.c +./lib/libzfs/os/freebsd/libzfs_zmount.c +./lib/libzutil/os/freebsd/zutil_compat.c +./lib/libzutil/os/freebsd/zutil_device_path_os.c +./lib/libzutil/os/freebsd/zutil_import_os.c +./module/lua/README.zfs +./module/os/linux/spl/README.md +./tests/README.md +./tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh +./tests/zfs-tests/tests/functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh +./tests/zfs-tests/tests/functional/inheritance/README.config +./tests/zfs-tests/tests/functional/inheritance/README.state +./tests/zfs-tests/tests/functional/rsend/rsend_016_neg.ksh +./tests/zfs-tests/tests/perf/fio/sequential_readwrite.fio Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10501
2020-06-25 18:14:54 +00:00
EXTRA_DIST = agents/README.md
cppcheck: integrete cppcheck In order for cppcheck to perform a proper analysis it needs to be aware of how the sources are compiled (source files, include paths/files, extra defines, etc). All the needed information is available from the Makefiles and can be leveraged with a generic cppcheck Makefile target. So let's add one. Additional minor changes: * Removing the cppcheck-suppressions.txt file. With cppcheck 2.3 and these changes it appears to no longer be needed. Some inline suppressions were also removed since they appear not to be needed. We can add them back if it turns out they're needed for older versions of cppcheck. * Added the ax_count_cpus m4 macro to detect at configure time how many processors are available in order to run multiple cppcheck jobs. This value is also now used as a replacement for nproc when executing the kernel interface checks. * "PHONY =" line moved in to the Rules.am file which is included at the top of all Makefile.am's. This is just convenient becase it allows us to use the += syntax to add phony targets. * One upside of this integration worth mentioning is it now allows `make cppcheck` to be run in any directory to check that subtree. * For the moment, cppcheck is not run against the FreeBSD specific kernel sources. The cppcheck-FreeBSD target will need to be implemented and testing on FreeBSD to support this. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11508
2021-01-22 20:54:34 +00:00
include $(top_srcdir)/config/CppCheck.am