Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/include/sys/fm/fs/zfs.h

138 lines
6.0 KiB
C
Raw Normal View History

Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
Replace dead opensolaris.org license link The commit replaces all findings of the link: http://www.opensolaris.org/os/licensing with this one: https://opensource.org/licenses/CDDL-1.0 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de> Closes #13619
2022-07-11 21:16:13 +00:00
* or https://opensource.org/licenses/CDDL-1.0.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
Rebase master to b117
2009-07-02 22:44:48 +00:00
* Copyright 2009 Sun Microsystems, Inc. All rights reserved.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
* Use is subject to license terms.
*/
Avoid posting duplicate zpool events Duplicate io and checksum ereport events can misrepresent that things are worse than they seem. Ideally the zpool events and the corresponding vdev stat error counts in a zpool status should be for unique errors -- not the same error being counted over and over. This can be demonstrated in a simple example. With a single bad block in a datafile and just 5 reads of the file we end up with a degraded vdev, even though there is only one unique error in the pool. The proposed solution to the above issue, is to eliminate duplicates when posting events and when updating vdev error stats. We now save recent error events of interest when posting events so that we can easily check for duplicates when posting an error. Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@delphix.com> Closes #10861
2020-09-04 17:34:28 +00:00
/*
* Copyright (c) 2020 by Delphix. All rights reserved.
*/
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#ifndef _SYS_FM_FS_ZFS_H
#define _SYS_FM_FS_ZFS_H
#ifdef __cplusplus
extern "C" {
#endif
#define ZFS_ERROR_CLASS "fs.zfs"
#define FM_EREPORT_ZFS_CHECKSUM "checksum"
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
#define FM_EREPORT_ZFS_AUTHENTICATION "authentication"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define FM_EREPORT_ZFS_IO "io"
#define FM_EREPORT_ZFS_DATA "data"
Initial zio delay timing While there is no right maximum timeout for a disk IO we can start laying the ground work to measure how long they do take in practice. This change simply measures the IO time and if it exceeds 30s an event is posted for 'zpool events'. This value was carefully selected because for sd devices it implies that at least one timeout (SD_TIMEOUT) has occured. Unfortunately, even with FAILFAST set we may retry and request and not get an error. This behavior is strongly dependant on the device driver and how it is hooked in to the scsi error handling stack. However by setting the limit at 30s we can log the event even if no error was returned. Slightly longer term we can start recording these delays perhaps as a simple power-of-two histrogram. This histogram can then be reported as part of the 'zpool status' command when given an command line option. None of this code changes the internal behavior of ZFS. Currently it is simply for reporting excessively long delays.
2010-10-01 23:54:52 +00:00
#define FM_EREPORT_ZFS_DELAY "delay"
Extend deadman logic The intent of this patch is extend the existing deadman code such that it's flexible enough to be used by both ztest and on production systems. The proposed changes include: * Added a new `zfs_deadman_failmode` module option which is used to dynamically control the behavior of the deadman. It's loosely modeled after, but independant from, the pool failmode property. It can be set to wait, continue, or panic. * wait - Wait for the "hung" I/O (default) * continue - Attempt to recover from a "hung" I/O * panic - Panic the system * Added a new `zfs_deadman_ziotime_ms` module option which is analogous to `zfs_deadman_synctime_ms` except instead of applying to a pool TXG sync it applies to zio_wait(). A default value of 300s is used to define a "hung" zio. * The ztest deadman thread has been re-enabled by default, aligned with the upstream OpenZFS code, and then extended to terminate the process when it takes significantly longer to complete than expected. * The -G option was added to ztest to print the internal debug log when a fatal error is encountered. This same option was previously added to zdb in commit fa603f82. Update zloop.sh to unconditionally pass -G to obtain additional debugging. * The FM_EREPORT_ZFS_DELAY event which was previously posted when the deadman detect a "hung" pool has been replaced by a new dedicated FM_EREPORT_ZFS_DEADMAN event. * The proposed recovery logic attempts to restart a "hung" zio by calling zio_interrupt() on any outstanding leaf zios. We may want to further restrict this to zios in either the ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages. Calling zio_interrupt() is expected to only be useful for cases when an IO has been submitted to the physical device but for some reasonable the completion callback hasn't been called by the lower layers. This shouldn't be possible but has been observed and may be caused by kernel/driver bugs. * The 'zfs_deadman_synctime_ms' default value was reduced from 1000s to 600s. * Depending on how ztest fails there may be no cache file to move. This should not be considered fatal, collect the logs which are available and carry on. * Add deadman test cases for spa_deadman() and zio_wait(). * Increase default zfs_deadman_checktime_ms to 60s. Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6999
2017-12-18 22:06:07 +00:00
#define FM_EREPORT_ZFS_DEADMAN "deadman"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define FM_EREPORT_ZFS_POOL "zpool"
#define FM_EREPORT_ZFS_DEVICE_UNKNOWN "vdev.unknown"
#define FM_EREPORT_ZFS_DEVICE_OPEN_FAILED "vdev.open_failed"
#define FM_EREPORT_ZFS_DEVICE_CORRUPT_DATA "vdev.corrupt_data"
#define FM_EREPORT_ZFS_DEVICE_NO_REPLICAS "vdev.no_replicas"
#define FM_EREPORT_ZFS_DEVICE_BAD_GUID_SUM "vdev.bad_guid_sum"
#define FM_EREPORT_ZFS_DEVICE_TOO_SMALL "vdev.too_small"
#define FM_EREPORT_ZFS_DEVICE_BAD_LABEL "vdev.bad_label"
Illumos #2671: zpool import should not fail if vdev ashift has increased Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Gordon Ross <gwr@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Approved by: Richard Lowe <richlowe@richlowe.net> Refererces to Illumos issue: https://www.illumos.org/issues/2671 This patch has been slightly modified from the upstream Illumos version. In the upstream implementation a warning message is logged to the console. To prevent pointless console noise this notification is now posted as a "ereport.fs.zfs.vdev.bad_ashift" event. The event indicates a non-optimial (but entirely safe) ashift value was used to create the pool. Depending on your workload this may impact pool performance. Unfortunately, the only way to correct the issue is to recreate the pool with a new ashift. NOTE: The unrelated fix to the comment in zpool_main.c appears in the upstream commit and was preserved for consistnecy. Ported-by: Cyril Plisko <cyril.plisko@mountall.com> Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #955
2012-05-03 12:49:19 +00:00
#define FM_EREPORT_ZFS_DEVICE_BAD_ASHIFT "vdev.bad_ashift"
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
#define FM_EREPORT_ZFS_IO_FAILURE "io_failure"
#define FM_EREPORT_ZFS_PROBE_FAILURE "probe_failure"
#define FM_EREPORT_ZFS_LOG_REPLAY "log_replay"
Illumos 3749 - zfs event processing should work on R/O root filesystems 3749 zfs event processing should work on R/O root filesystems Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Approved by: Christopher Siden <christopher.siden@delphix.com> References: https://www.illumos.org/issues/3749 https://github.com/illumos/illumos-gate/commit/3cb69f7 Porting notes: - [include/sys/spa_impl.h] - ffe9d38 Add generic errata infrastructure - 1421c89 Add visibility in to arc_read - [include/sys/fm/fs/zfs.h] - 2668527 Add linux events - 6283f55 Support custom build directories and move includes - [module/zfs/spa_config.c] - Updated spa_config_sync() to match illumos with the exception of a Linux specific block. Ported-by: kernelOfTruth kerneloftruth@gmail.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-12-31 16:38:59 +00:00
#define FM_EREPORT_ZFS_CONFIG_CACHE_WRITE "config_cache_write"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_POOL "pool"
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_POOL_FAILMODE "pool_failmode"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_POOL_GUID "pool_guid"
#define FM_EREPORT_PAYLOAD_ZFS_POOL_CONTEXT "pool_context"
Additional Information for Zedlets * Add ZPOOL pool state to zfs_post_common to allow differentiation between export and destroy by zedlets. * Add pool name as standard export This ensures pool name is exported to zedlets. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com> Closes #5942
2017-04-03 21:23:02 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_POOL_STATE "pool_state"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_GUID "vdev_guid"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_TYPE "vdev_type"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_PATH "vdev_path"
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_PHYSPATH "vdev_physpath"
Turn on/off enclosure slot fault LED even when disk isn't present Previously when a drive faulted, the statechange-led.sh script would lookup the drive's LED sysfs entry in /sys/block/sd*/device/enclosure_device, and turn it on. During testing we noticed that if you pulled out a drive, or if the drive was so badly broken that it no longer appeared to Linux, that the /sys/block/sd* path would be removed, and the script could not lookup the LED entry. To fix this, this patch looks up the disks's more persistent "/sys/class/enclosure/X:X:X:X/Slot N" LED sysfs path at pool import. It then passes that path to the statechange-led script to use, rather than having the script look it up on the fly. This allows the script to turn on/off the slot LEDs even when the drive is missing. Closes #5309 Closes #2375
2016-10-24 17:45:59 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_ENC_SYSFS_PATH "vdev_enc_sysfs_path"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_DEVID "vdev_devid"
Rebase master to b117
2009-07-02 22:44:48 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_FRU "vdev_fru"
Add linux events This topic branch leverages the Solaris style FMA call points in ZFS to create a user space visible event notification system under Linux. This new system is called zevent and it unifies all previous Solaris style ereports and sysevent notifications. Under this Linux specific scheme when a sysevent or ereport event occurs an nvlist describing the event is created which looks almost exactly like a Solaris ereport. These events are queued up in the kernel when they occur and conditionally logged to the console. It is then up to a user space application to consume the events and do whatever it likes with them. To make this possible the existing /dev/zfs ABI has been extended with two new ioctls which behave as follows. * ZFS_IOC_EVENTS_NEXT Get the next pending event. The kernel will keep track of the last event consumed by the file descriptor and provide the next one if available. If no new events are available the ioctl() will block waiting for the next event. This ioctl may also be called in a non-blocking mode by setting zc.zc_guid = ZEVENT_NONBLOCK. In the non-blocking case if no events are available ENOENT will be returned. It is possible that ESHUTDOWN will be returned if the ioctl() is called while module unloading is in progress. And finally ENOMEM may occur if the provided nvlist buffer is not large enough to contain the entire event. * ZFS_IOC_EVENTS_CLEAR Clear are events queued by the kernel. The kernel will keep a fairly large number of recent events queued, use this ioctl to clear the in kernel list. This will effect all user space processes consuming events. The zpool command has been extended to use this events ABI with the 'events' subcommand. You may run 'zpool events -v' to output a verbose log of all recent events. This is very similar to the Solaris 'fmdump -ev' command with the key difference being it also includes what would be considered sysevents under Solaris. You may also run in follow mode with the '-f' option. To clear the in kernel event queue use the '-c' option. $ sudo cmd/zpool/zpool events -fv TIME CLASS May 13 2010 16:31:15.777711000 ereport.fs.zfs.config.sync class = "ereport.fs.zfs.config.sync" ena = 0x40982b7897700001 detector = (embedded nvlist) version = 0x0 scheme = "zfs" pool = 0xed976600de75dfa6 (end detector) time = 0x4bec8bc3 0x2e5aed98 pool = "zpios" pool_guid = 0xed976600de75dfa6 pool_context = 0x0 While the 'zpool events' command is handy for interactive debugging it is not expected to be the primary consumer of zevents. This ABI was primarily added to facilitate the addition of a user space monitoring daemon. This daemon would consume all events posted by the kernel and based on the type of event perform an action. For most events simply forwarding them on to syslog is likely enough. But this interface also cleanly allows for more sophisticated actions to be taken such as generating an email for a failed drive. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:42:43 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_STATE "vdev_state"
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_LASTSTATE "vdev_laststate"
Illumos #2671: zpool import should not fail if vdev ashift has increased Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Gordon Ross <gwr@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Approved by: Richard Lowe <richlowe@richlowe.net> Refererces to Illumos issue: https://www.illumos.org/issues/2671 This patch has been slightly modified from the upstream Illumos version. In the upstream implementation a warning message is logged to the console. To prevent pointless console noise this notification is now posted as a "ereport.fs.zfs.vdev.bad_ashift" event. The event indicates a non-optimial (but entirely safe) ashift value was used to create the pool. Depending on your workload this may impact pool performance. Unfortunately, the only way to correct the issue is to recreate the pool with a new ashift. NOTE: The unrelated fix to the comment in zpool_main.c appears in the upstream commit and was preserved for consistnecy. Ported-by: Cyril Plisko <cyril.plisko@mountall.com> Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #955
2012-05-03 12:49:19 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_ASHIFT "vdev_ashift"
3246 ZFS I/O deadman thread Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> NOTES: This patch has been reworked from the original in the following ways to accomidate Linux ZFS implementation *) Usage of the cyclic interface was replaced by the delayed taskq interface. This avoids the need to implement new compatibility code and allows us to rely on the existing taskq implementation. *) An extern for zfs_txg_synctime_ms was added to sys/dsl_pool.h because declaring externs in source files as was done in the original patch is just plain wrong. *) Instead of panicing the system when the deadman triggers a zevent describing the blocked vdev and the first pending I/O is posted. If the panic behavior is desired Linux provides other generic methods to panic the system when threads are observed to hang. *) For reference, to delay zios by 30 seconds for testing you can use zinject as follows: 'zinject -d <vdev> -D30 <pool>' References: illumos/illumos-gate@283b84606b6fc326692c03273de1774e8c122f9a https://www.illumos.org/issues/3246 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1396
2013-04-29 22:49:23 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_COMP_TS "vdev_complete_ts"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_DELTA_TS "vdev_delta_ts"
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_SPARE_PATHS "vdev_spare_paths"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_SPARE_GUIDS "vdev_spare_guids"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_READ_ERRORS "vdev_read_errors"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_WRITE_ERRORS "vdev_write_errors"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_CKSUM_ERRORS "vdev_cksum_errors"
Configure zed's diagnosis engine with vdev properties Introduce four new vdev properties: checksum_n checksum_t io_n io_t These properties can be used for configuring the thresholds of zed's diagnosis engine and are interpeted as <N> events in T <seconds>. When this property is set to a non-default value on a top-level vdev, those thresholds will also apply to its leaf vdevs. This behavior can be overridden by explicitly setting the property on the leaf vdev. Note that, these properties do not persist across vdev replacement. For this reason, it is advisable to set the property on the top-level vdev instead of the leaf vdev. The default values for zed's diagnosis engine (10 events, 600 seconds) remains unchanged. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Wing <rob.wing@klarasystems.com> Sponsored-by: Seagate Technology LLC Closes #13805
2023-01-23 21:14:25 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_CKSUM_N "vdev_cksum_n"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_CKSUM_T "vdev_cksum_t"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_IO_N "vdev_io_n"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_IO_T "vdev_io_t"
Add slow disk diagnosis to ZED Slow disk response times can be indicative of a failing drive. ZFS currently tracks slow I/Os (slower than zio_slow_io_ms) and generates events (ereport.fs.zfs.delay). However, no action is taken by ZED, like is done for checksum or I/O errors. This change adds slow disk diagnosis to ZED which is opt-in using new VDEV properties: VDEV_PROP_SLOW_IO_N VDEV_PROP_SLOW_IO_T If multiple VDEVs in a pool are undergoing slow I/Os, then it skips the zpool_vdev_degrade(). Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Rob Wing <rob.wing@klarasystems.com> Signed-off-by: Don Brady <don.brady@klarasystems.com> Closes #15469
2024-02-08 17:19:52 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_SLOW_IO_N "vdev_slow_io_n"
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_SLOW_IO_T "vdev_slow_io_t"
Add zpool status -s (slow I/Os) and -p (parseable) This patch adds a new slow I/Os (-s) column to zpool status to show the number of VDEV slow I/Os. This is the number of I/Os that didn't complete in zio_slow_io_ms milliseconds. It also adds a new parsable (-p) flag to display exact values. NAME STATE READ WRITE CKSUM SLOW testpool ONLINE 0 0 0 - mirror-0 ONLINE 0 0 0 - loop0 ONLINE 0 0 0 20 loop1 ONLINE 0 0 0 0 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #7756 Closes #6885
2018-11-09 00:47:24 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_VDEV_DELAYS "vdev_delays"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_PARENT_GUID "parent_guid"
#define FM_EREPORT_PAYLOAD_ZFS_PARENT_TYPE "parent_type"
#define FM_EREPORT_PAYLOAD_ZFS_PARENT_PATH "parent_path"
#define FM_EREPORT_PAYLOAD_ZFS_PARENT_DEVID "parent_devid"
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_OBJSET "zio_objset"
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_OBJECT "zio_object"
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_LEVEL "zio_level"
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_BLKID "zio_blkid"
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_ERR "zio_err"
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_OFFSET "zio_offset"
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_SIZE "zio_size"
Generate zevents for speculative and soft errors By default the Solaris code does not log speculative or soft io errors in either 'zpool status' or post an event. Under Linux we don't want to change the expected behavior of 'zpool status' so these io errors are still suppressed there. However, since we do need to know about these events for Linux FMA and the 'zpool events' interface is new we do post the events. With the addition of the zio_flags field the posted events now contain enough information that a user space consumer can identify and discard these events if it sees fit.
2010-09-27 23:55:05 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_FLAGS "zio_flags"
Log I/Os longer than zio_delay_max (30s default) There have been reports of ZFS deadlocking due to what appears to be a lost IO. This patch addes some debugging to determine the exact state of the IO which neither 1) completed, 2) failed, or 3) timed out after zio_delay_max (30) seconds. This information will be logged using the ZFS FMA infrastructure as a 'delay' event and posted to the internal zevent log. By default the last 64 events will be kept in the log but the limit is configurable via the zfs_zevent_len_max module option. To dump the contents of the log use the 'zpool events -v' command and look for the resource.fs.zfs.delay event. It will include various information about the pool, vdev, and zio which may shed some light on the issue. In the context of this change the 120 second kernel blocked thread watchdog has been disabled for synchronous IOs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #930
2012-10-25 20:02:31 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_STAGE "zio_stage"
Avoid posting duplicate zpool events Duplicate io and checksum ereport events can misrepresent that things are worse than they seem. Ideally the zpool events and the corresponding vdev stat error counts in a zpool status should be for unique errors -- not the same error being counted over and over. This can be demonstrated in a simple example. With a single bad block in a datafile and just 5 reads of the file we end up with a degraded vdev, even though there is only one unique error in the pool. The proposed solution to the above issue, is to eliminate duplicates when posting events and when updating vdev error stats. We now save recent error events of interest when posting events so that we can easily check for duplicates when posting an error. Reviewed by: Brad Lewis <brad.lewis@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@delphix.com> Closes #10861
2020-09-04 17:34:28 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_PRIORITY "zio_priority"
Log I/Os longer than zio_delay_max (30s default) There have been reports of ZFS deadlocking due to what appears to be a lost IO. This patch addes some debugging to determine the exact state of the IO which neither 1) completed, 2) failed, or 3) timed out after zio_delay_max (30) seconds. This information will be logged using the ZFS FMA infrastructure as a 'delay' event and posted to the internal zevent log. By default the last 64 events will be kept in the log but the limit is configurable via the zfs_zevent_len_max module option. To dump the contents of the log use the 'zpool events -v' command and look for the resource.fs.zfs.delay event. It will include various information about the pool, vdev, and zio which may shed some light on the issue. In the context of this change the 120 second kernel blocked thread watchdog has been disabled for synchronous IOs. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #930
2012-10-25 20:02:31 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_PIPELINE "zio_pipeline"
Initial zio delay timing While there is no right maximum timeout for a disk IO we can start laying the ground work to measure how long they do take in practice. This change simply measures the IO time and if it exceeds 30s an event is posted for 'zpool events'. This value was carefully selected because for sd devices it implies that at least one timeout (SD_TIMEOUT) has occured. Unfortunately, even with FAILFAST set we may retry and request and not get an error. This behavior is strongly dependant on the device driver and how it is hooked in to the scsi error handling stack. However by setting the limit at 30s we can log the event even if no error was returned. Slightly longer term we can start recording these delays perhaps as a simple power-of-two histrogram. This histogram can then be reported as part of the 'zpool status' command when given an command line option. None of this code changes the internal behavior of ZFS. Currently it is simply for reporting excessively long delays.
2010-10-01 23:54:52 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_DELAY "zio_delay"
3246 ZFS I/O deadman thread Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> NOTES: This patch has been reworked from the original in the following ways to accomidate Linux ZFS implementation *) Usage of the cyclic interface was replaced by the delayed taskq interface. This avoids the need to implement new compatibility code and allows us to rely on the existing taskq implementation. *) An extern for zfs_txg_synctime_ms was added to sys/dsl_pool.h because declaring externs in source files as was done in the original patch is just plain wrong. *) Instead of panicing the system when the deadman triggers a zevent describing the blocked vdev and the first pending I/O is posted. If the panic behavior is desired Linux provides other generic methods to panic the system when threads are observed to hang. *) For reference, to delay zios by 30 seconds for testing you can use zinject as follows: 'zinject -d <vdev> -D30 <pool>' References: illumos/illumos-gate@283b84606b6fc326692c03273de1774e8c122f9a https://www.illumos.org/issues/3246 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1396
2013-04-29 22:49:23 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_TIMESTAMP "zio_timestamp"
#define FM_EREPORT_PAYLOAD_ZFS_ZIO_DELTA "zio_delta"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_PREV_STATE "prev_state"
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_CKSUM_ALGO "cksum_algorithm"
#define FM_EREPORT_PAYLOAD_ZFS_CKSUM_BYTESWAP "cksum_byteswap"
#define FM_EREPORT_PAYLOAD_ZFS_BAD_OFFSET_RANGES "bad_ranges"
#define FM_EREPORT_PAYLOAD_ZFS_BAD_RANGE_MIN_GAP "bad_ranges_min_gap"
#define FM_EREPORT_PAYLOAD_ZFS_BAD_RANGE_SETS "bad_range_sets"
#define FM_EREPORT_PAYLOAD_ZFS_BAD_RANGE_CLEARS "bad_range_clears"
#define FM_EREPORT_PAYLOAD_ZFS_BAD_SET_BITS "bad_set_bits"
#define FM_EREPORT_PAYLOAD_ZFS_BAD_CLEARED_BITS "bad_cleared_bits"
Upstream: Add snapshot and zvol events For kernel to send snapshot mount/unmount events to zed. For kernel to send symlink creates/removes on zvol plumbing. (/dev/run/dsk/zvol/$pool/$zvol -> /dev/diskX) If zed misses the ENODEV, all errors after are EINVAL. Treat any error as kernel module failure. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Jorgen Lundman <lundman@lundman.net> Closes #12416
2021-09-09 17:44:21 +00:00
#define FM_EREPORT_PAYLOAD_ZFS_SNAPSHOT_NAME "snapshot_name"
#define FM_EREPORT_PAYLOAD_ZFS_DEVICE_NAME "device_name"
#define FM_EREPORT_PAYLOAD_ZFS_RAW_DEVICE_NAME "raw_name"
#define FM_EREPORT_PAYLOAD_ZFS_VOLUME "volume"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
#define FM_EREPORT_FAILMODE_WAIT "wait"
#define FM_EREPORT_FAILMODE_CONTINUE "continue"
#define FM_EREPORT_FAILMODE_PANIC "panic"
OpenZFS 5997 - FRU field not set during pool creation and never updated Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com> Reviewed by: Dan Fields <dan.fields@nexenta.com> Reviewed by: Josef Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Signed-off-by: Don Brady <don.brady@intel.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/5997 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283 Porting Notes: In addition to the OpenZFS changes this patch realigns the events with those found in OpenZFS. Events which would be logged as sysevents on illumos have been been mapped to the 'sysevent' class for Linux. In addition, several subclass names have been changed to match what is used in OpenZFS. In all cases this means a '.' was changed to an '_' in the subclass. The scripts provided by ZoL have been updated, however users which provide scripts for any of the following events will need to rename them based on the new subclass names. ereport.fs.zfs.config.sync sysevent.fs.zfs.config_sync ereport.fs.zfs.zpool.destroy sysevent.fs.zfs.pool_destroy ereport.fs.zfs.zpool.reguid sysevent.fs.zfs.pool_reguid ereport.fs.zfs.vdev.remove sysevent.fs.zfs.vdev_remove ereport.fs.zfs.vdev.clear sysevent.fs.zfs.vdev_clear ereport.fs.zfs.vdev.check sysevent.fs.zfs.vdev_check ereport.fs.zfs.vdev.spare sysevent.fs.zfs.vdev_spare ereport.fs.zfs.vdev.autoexpand sysevent.fs.zfs.vdev_autoexpand ereport.fs.zfs.resilver.start sysevent.fs.zfs.resilver_start ereport.fs.zfs.resilver.finish sysevent.fs.zfs.resilver_finish ereport.fs.zfs.scrub.start sysevent.fs.zfs.scrub_start ereport.fs.zfs.scrub.finish sysevent.fs.zfs.scrub_finish ereport.fs.zfs.bootfs.vdev.attach sysevent.fs.zfs.bootfs_vdev_attach
2016-07-27 22:29:15 +00:00
#define FM_RESOURCE_REMOVED "removed"
#define FM_RESOURCE_AUTOREPLACE "autoreplace"
#define FM_RESOURCE_STATECHANGE "statechange"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Upstream: Add snapshot and zvol events For kernel to send snapshot mount/unmount events to zed. For kernel to send symlink creates/removes on zvol plumbing. (/dev/run/dsk/zvol/$pool/$zvol -> /dev/diskX) If zed misses the ENODEV, all errors after are EINVAL. Treat any error as kernel module failure. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Jorgen Lundman <lundman@lundman.net> Closes #12416
2021-09-09 17:44:21 +00:00
#define FM_RESOURCE_ZFS_SNAPSHOT_MOUNT "snapshot_mount"
#define FM_RESOURCE_ZFS_SNAPSHOT_UNMOUNT "snapshot_unmount"
#define FM_RESOURCE_ZVOL_CREATE_SYMLINK "zvol_create"
#define FM_RESOURCE_ZVOL_REMOVE_SYMLINK "zvol_remove"
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#ifdef __cplusplus
}
#endif
#endif /* _SYS_FM_FS_ZFS_H */