zfs/include/os/linux/spl/sys/rwlock.h

201 lines
4.7 KiB
C
Raw Normal View History

/*
* Copyright (C) 2007-2010 Lawrence Livermore National Security, LLC.
* Copyright (C) 2007 The Regents of the University of California.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Written by Brian Behlendorf <behlendorf1@llnl.gov>.
* UCRL-CODE-235197
*
* This file is part of the SPL, Solaris Porting Layer.
*
* The SPL is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* The SPL is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with the SPL. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _SPL_RWLOCK_H
#define _SPL_RWLOCK_H
#include <sys/types.h>
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
#include <linux/rwsem.h>
Update build system and packaging Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> TEST_ZIMPORT_SKIP="yes" Closes #7556
2018-02-16 01:53:18 +00:00
#include <linux/sched.h>
typedef enum {
RW_DRIVER = 2,
RW_DEFAULT = 4,
RW_NOLOCKDEP = 5
} krw_type_t;
typedef enum {
RW_NONE = 0,
RW_WRITER = 1,
RW_READER = 2
} krw_t;
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
typedef struct {
struct rw_semaphore rw_rwlock;
kthread_t *rw_owner;
#ifdef CONFIG_LOCKDEP
krw_type_t rw_type;
#endif /* CONFIG_LOCKDEP */
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
} krwlock_t;
#define SEM(rwp) (&(rwp)->rw_rwlock)
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
static inline void
spl_rw_set_owner(krwlock_t *rwp)
{
rwp->rw_owner = current;
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
}
static inline void
spl_rw_clear_owner(krwlock_t *rwp)
{
rwp->rw_owner = NULL;
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
}
static inline kthread_t *
rw_owner(krwlock_t *rwp)
{
return (rwp->rw_owner);
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
}
#ifdef CONFIG_LOCKDEP
static inline void
spl_rw_set_type(krwlock_t *rwp, krw_type_t type)
{
rwp->rw_type = type;
}
static inline void
spl_rw_lockdep_off_maybe(krwlock_t *rwp) \
{ \
if (rwp && rwp->rw_type == RW_NOLOCKDEP) \
lockdep_off(); \
}
static inline void
spl_rw_lockdep_on_maybe(krwlock_t *rwp) \
{ \
if (rwp && rwp->rw_type == RW_NOLOCKDEP) \
lockdep_on(); \
}
#else /* CONFIG_LOCKDEP */
#define spl_rw_set_type(rwp, type)
#define spl_rw_lockdep_off_maybe(rwp)
#define spl_rw_lockdep_on_maybe(rwp)
#endif /* CONFIG_LOCKDEP */
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
static inline int
RW_LOCK_HELD(krwlock_t *rwp)
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
{
return (rwsem_is_locked(SEM(rwp)));
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
}
static inline int
RW_WRITE_HELD(krwlock_t *rwp)
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
{
return (rw_owner(rwp) == current);
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
}
static inline int
RW_READ_HELD(krwlock_t *rwp)
{
return (RW_LOCK_HELD(rwp) && rw_owner(rwp) == NULL);
}
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
/*
* The following functions must be a #define and not static inline.
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
* This ensures that the native linux semaphore functions (down/up)
* will be correctly located in the users code which is important
* for the built in kernel lock analysis tools
*/
/* BEGIN CSTYLED */
#define rw_init(rwp, name, type, arg) \
({ \
static struct lock_class_key __key; \
ASSERT(type == RW_DEFAULT || type == RW_NOLOCKDEP); \
\
__init_rwsem(SEM(rwp), #rwp, &__key); \
spl_rw_clear_owner(rwp); \
spl_rw_set_type(rwp, type); \
Reimplement rwlocks for Linux lock profiling/analysis. It turns out that the previous rwlock implementation worked well but did not integrate properly with the upstream kernel lock profiling/ analysis tools. This is a major problem since it would be awfully nice to be able to use the automatic lock checker and profiler. The problem is that the upstream lock tools use the pre-processor to create a lock class for each uniquely named locked. Since the rwsem was embedded in a wrapper structure the name was always the same. The effect was that we only ended up with one lock class for the entire SPL which caused the lock dependency checker to flag nearly everything as a possible deadlock. The solution was to directly map a krwlock to a Linux rwsem using a typedef there by eliminating the wrapper structure. This was not done initially because the rwsem implementation is specific to the arch. To fully implement the Solaris krwlock API using only the provided rwsem API is not possible. It can only be done by directly accessing some of the internal data member of the rwsem structure. For example, the Linux API provides a different function for dropping a reader vs writer lock. Whereas the Solaris API uses the same function and the caller does not pass in what type of lock it is. This means to properly drop the lock we need to determine if the lock is currently a reader or writer lock. Then we need to call the proper Linux API function. Unfortunately, there is no provided API for this so we must extracted this information directly from arch specific lock implementation. This is all do able, and what I did, but it does complicate things considerably. The good news is that in addition to the profiling benefits of this change. We may see performance improvements due to slightly reduced overhead when creating rwlocks and manipulating them. The only function I was forced to sacrafice was rw_owner() because this information is simply not stored anywhere in the rwsem. Luckily this appears not to be a commonly used function on Solaris, and it is my understanding it is mainly used for debugging anyway. In addition to the core rwlock changes, extensive updates were made to the rwlock regression tests. Each class of test was extended to provide more API coverage and to be more rigerous in checking for misbehavior. This is a pretty significant change and with that in mind I have been careful to validate it on several platforms before committing. The full SPLAT regression test suite was run numberous times on all of the following platforms. This includes various kernels ranging from 2.6.16 to 2.6.29. - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-18 23:09:47 +00:00
})
/*
* The Linux rwsem implementation does not require a matching destroy.
*/
#define rw_destroy(rwp) ((void) 0)
/*
* Upgrading a rwsem from a reader to a writer is not supported by the
* Linux kernel. The lock must be dropped and reacquired as a writer.
*/
#define rw_tryupgrade(rwp) RW_WRITE_HELD(rwp)
#define rw_tryenter(rwp, rw) \
({ \
int _rc_ = 0; \
\
spl_rw_lockdep_off_maybe(rwp); \
switch (rw) { \
case RW_READER: \
_rc_ = down_read_trylock(SEM(rwp)); \
break; \
case RW_WRITER: \
if ((_rc_ = down_write_trylock(SEM(rwp)))) \
spl_rw_set_owner(rwp); \
break; \
default: \
VERIFY(0); \
} \
spl_rw_lockdep_on_maybe(rwp); \
_rc_; \
})
#define rw_enter(rwp, rw) \
({ \
spl_rw_lockdep_off_maybe(rwp); \
switch (rw) { \
case RW_READER: \
down_read(SEM(rwp)); \
break; \
case RW_WRITER: \
down_write(SEM(rwp)); \
spl_rw_set_owner(rwp); \
break; \
default: \
VERIFY(0); \
} \
spl_rw_lockdep_on_maybe(rwp); \
Reimplement rwlocks for Linux lock profiling/analysis. It turns out that the previous rwlock implementation worked well but did not integrate properly with the upstream kernel lock profiling/ analysis tools. This is a major problem since it would be awfully nice to be able to use the automatic lock checker and profiler. The problem is that the upstream lock tools use the pre-processor to create a lock class for each uniquely named locked. Since the rwsem was embedded in a wrapper structure the name was always the same. The effect was that we only ended up with one lock class for the entire SPL which caused the lock dependency checker to flag nearly everything as a possible deadlock. The solution was to directly map a krwlock to a Linux rwsem using a typedef there by eliminating the wrapper structure. This was not done initially because the rwsem implementation is specific to the arch. To fully implement the Solaris krwlock API using only the provided rwsem API is not possible. It can only be done by directly accessing some of the internal data member of the rwsem structure. For example, the Linux API provides a different function for dropping a reader vs writer lock. Whereas the Solaris API uses the same function and the caller does not pass in what type of lock it is. This means to properly drop the lock we need to determine if the lock is currently a reader or writer lock. Then we need to call the proper Linux API function. Unfortunately, there is no provided API for this so we must extracted this information directly from arch specific lock implementation. This is all do able, and what I did, but it does complicate things considerably. The good news is that in addition to the profiling benefits of this change. We may see performance improvements due to slightly reduced overhead when creating rwlocks and manipulating them. The only function I was forced to sacrafice was rw_owner() because this information is simply not stored anywhere in the rwsem. Luckily this appears not to be a commonly used function on Solaris, and it is my understanding it is mainly used for debugging anyway. In addition to the core rwlock changes, extensive updates were made to the rwlock regression tests. Each class of test was extended to provide more API coverage and to be more rigerous in checking for misbehavior. This is a pretty significant change and with that in mind I have been careful to validate it on several platforms before committing. The full SPLAT regression test suite was run numberous times on all of the following platforms. This includes various kernels ranging from 2.6.16 to 2.6.29. - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-18 23:09:47 +00:00
})
#define rw_exit(rwp) \
({ \
spl_rw_lockdep_off_maybe(rwp); \
if (RW_WRITE_HELD(rwp)) { \
spl_rw_clear_owner(rwp); \
up_write(SEM(rwp)); \
} else { \
ASSERT(RW_READ_HELD(rwp)); \
up_read(SEM(rwp)); \
} \
spl_rw_lockdep_on_maybe(rwp); \
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
})
#define rw_downgrade(rwp) \
({ \
spl_rw_lockdep_off_maybe(rwp); \
spl_rw_clear_owner(rwp); \
downgrade_write(SEM(rwp)); \
spl_rw_lockdep_on_maybe(rwp); \
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
})
/* END CSTYLED */
Update rwlocks to track owner to ensure correct semantics The behavior of RW_*_HELD was updated because it was not quite right. It is not sufficient to return non-zero when the lock is help, we must only do this when the current task in the holder. This means we need to track the lock owner which is not something tracked in a Linux semaphore. After some experimentation the solution I settled on was to embed the Linux semaphore at the start of a larger krwlock_t structure which includes the owner field. This maintains good performance and allows us to cleanly intergrate with the kernel lock analysis tools. My reasons: 1) By placing the Linux semaphore at the start of krwlock_t we can then simply cast krwlock_t to a rw_semaphore and pass that on to the linux kernel. This allows us to use '#defines so the preprocessor can do direct replacement of the Solaris primative with the linux equivilant. This is important because it then maintains the location information for each rw_* call point. 2) Additionally, by adding the owner to krwlock_t we can keep this needed extra information adjacent to the lock itself. This removes the need for a fancy lookup to get the owner which is optimal for performance. We can also leverage the existing spin lock in the semaphore to ensure owner is updated correctly. 3) All helper functions which do not need to strictly be implemented as a define to preserve location information can be done as a static inline function. 4) Adding the owner to krwlock_t allows us to remove all memory allocations done during lock initialization. This is good for all the obvious reasons, we do give up the ability to specific the lock name. The Linux profiling tools will stringify the lock name used in the code via the preprocessor and use that. Update rwlocks validated on: - SLES10 (ppc64) - SLES11 (x86_64) - CHAOS4.2 (x86_64) - RHEL5.3 (x86_64) - RHEL6 (x86_64) - FC11 (x86_64)
2009-09-25 21:14:35 +00:00
#endif /* _SPL_RWLOCK_H */