zfs/cmd/zdb/zdb.c

8774 lines
238 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
2008-11-20 20:01:55 +00:00
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011, 2019 by Delphix. All rights reserved.
* Copyright (c) 2014 Integros [integros.com]
* Copyright 2016 Nexenta Systems, Inc.
* Copyright (c) 2017, 2018 Lawrence Livermore National Security, LLC.
* Copyright (c) 2015, 2017, Intel Corporation.
* Copyright (c) 2020 Datto Inc.
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
* Copyright (c) 2020, The FreeBSD Foundation [1]
*
* [1] Portions of this software were developed by Allan Jude
* under sponsorship from the FreeBSD Foundation.
* Copyright (c) 2021 Allan Jude
2008-11-20 20:01:55 +00:00
*/
#include <stdio.h>
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
#include <unistd.h>
2008-11-20 20:01:55 +00:00
#include <stdlib.h>
#include <ctype.h>
#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/spa_impl.h>
#include <sys/dmu.h>
#include <sys/zap.h>
#include <sys/fs/zfs.h>
#include <sys/zfs_znode.h>
#include <sys/zfs_sa.h>
#include <sys/sa.h>
#include <sys/sa_impl.h>
2008-11-20 20:01:55 +00:00
#include <sys/vdev.h>
#include <sys/vdev_impl.h>
#include <sys/metaslab_impl.h>
#include <sys/dmu_objset.h>
#include <sys/dsl_dir.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_pool.h>
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
#include <sys/dsl_bookmark.h>
2008-11-20 20:01:55 +00:00
#include <sys/dbuf.h>
#include <sys/zil.h>
#include <sys/zil_impl.h>
#include <sys/stat.h>
#include <sys/resource.h>
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
#include <sys/dmu_send.h>
2008-11-20 20:01:55 +00:00
#include <sys/dmu_traverse.h>
#include <sys/zio_checksum.h>
#include <sys/zio_compress.h>
#include <sys/zfs_fuid.h>
#include <sys/arc.h>
#include <sys/arc_impl.h>
#include <sys/ddt.h>
#include <sys/zfeature.h>
#include <sys/abd.h>
#include <sys/blkptr.h>
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
#include <sys/dsl_crypt.h>
#include <sys/dsl_scan.h>
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
#include <sys/btree.h>
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
#include <zfs_comutil.h>
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
#include <sys/zstd/zstd.h>
#include <libnvpair.h>
#include <libzutil.h>
2008-11-20 20:01:55 +00:00
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
#include "zdb.h"
#define ZDB_COMPRESS_NAME(idx) ((idx) < ZIO_COMPRESS_FUNCTIONS ? \
zio_compress_table[(idx)].ci_name : "UNKNOWN")
#define ZDB_CHECKSUM_NAME(idx) ((idx) < ZIO_CHECKSUM_FUNCTIONS ? \
zio_checksum_table[(idx)].ci_name : "UNKNOWN")
#define ZDB_OT_TYPE(idx) ((idx) < DMU_OT_NUMTYPES ? (idx) : \
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
(idx) == DMU_OTN_ZAP_DATA || (idx) == DMU_OTN_ZAP_METADATA ? \
DMU_OT_ZAP_OTHER : \
(idx) == DMU_OTN_UINT64_DATA || (idx) == DMU_OTN_UINT64_METADATA ? \
DMU_OT_UINT64_OTHER : DMU_OT_NUMTYPES)
static char *
zdb_ot_name(dmu_object_type_t type)
{
if (type < DMU_OT_NUMTYPES)
return (dmu_ot[type].ot_name);
else if ((type & DMU_OT_NEWTYPE) &&
((type & DMU_OT_BYTESWAP_MASK) < DMU_BSWAP_NUMFUNCS))
return (dmu_ot_byteswap[type & DMU_OT_BYTESWAP_MASK].ob_name);
else
return ("UNKNOWN");
}
extern int reference_tracking_enable;
extern int zfs_recover;
extern unsigned long zfs_arc_meta_min, zfs_arc_meta_limit;
extern int zfs_vdev_async_read_max_active;
extern boolean_t spa_load_verify_dryrun;
ztest: split block reconstruction Increase the default allowed number of reconstruction attempts. There's not an exact right number for this setting. It needs to be set large enough to cover any realistic failure scenarios and small enough to avoid stalling the IO pipeline and invoking the dead man detection. The current value of 256 was empirically determined to be too low based on multi-day runs of ztest. The fault injection code would inject more damage than could be reconstructed given the relatively small number of attempts. However, in all observed cases the block could be reconstructed using a slightly higher limit. Based on local testing increasing the default value to 4096 was determined to strike the best balance. Checking all combinations takes less than 10s in the worst case, and has so far eliminated the vast majority of false positives detected by ztest. This delay is roughly on par with how long retries may be performed to a misbehaving HDD and was deemed to be reasonable. Better to err on the side of a brief delay rather than fail to reconstruct the data. Lastly, the -Y flag has been added to zdb to make it easy to try all possible combinations when performing split block reconstruction. For badly damaged blocks with 18 splits, they can be fully enumerated within a few minutes. This has been done to ensure permanent errors are never incorrectly reported when ztest verifies the pool with zdb. Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8271
2019-01-16 22:10:02 +00:00
extern int zfs_reconstruct_indirect_combinations_max;
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 17:36:03 +00:00
extern int zfs_btree_verify_intensity;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
static const char cmdname[] = "zdb";
2008-11-20 20:01:55 +00:00
uint8_t dump_opt[256];
typedef void object_viewer_t(objset_t *, uint64_t, void *data, size_t size);
2020-01-24 19:00:46 +00:00
uint64_t *zopt_metaslab = NULL;
static unsigned zopt_metaslab_args = 0;
typedef struct zopt_object_range {
uint64_t zor_obj_start;
uint64_t zor_obj_end;
uint64_t zor_flags;
} zopt_object_range_t;
zopt_object_range_t *zopt_object_ranges = NULL;
static unsigned zopt_object_args = 0;
static int flagbits[256];
#define ZOR_FLAG_PLAIN_FILE 0x0001
#define ZOR_FLAG_DIRECTORY 0x0002
#define ZOR_FLAG_SPACE_MAP 0x0004
#define ZOR_FLAG_ZAP 0x0008
#define ZOR_FLAG_ALL_TYPES -1
#define ZOR_SUPPORTED_FLAGS (ZOR_FLAG_PLAIN_FILE | \
ZOR_FLAG_DIRECTORY | \
ZOR_FLAG_SPACE_MAP | \
ZOR_FLAG_ZAP)
#define ZDB_FLAG_CHECKSUM 0x0001
#define ZDB_FLAG_DECOMPRESS 0x0002
#define ZDB_FLAG_BSWAP 0x0004
#define ZDB_FLAG_GBH 0x0008
#define ZDB_FLAG_INDIRECT 0x0010
#define ZDB_FLAG_RAW 0x0020
#define ZDB_FLAG_PRINT_BLKPTR 0x0040
#define ZDB_FLAG_VERBOSE 0x0080
uint64_t max_inflight_bytes = 256 * 1024 * 1024; /* 256MB */
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 17:35:20 +00:00
static int leaked_objects = 0;
static range_tree_t *mos_refd_objs;
2008-11-20 20:01:55 +00:00
static void snprintf_blkptr_compact(char *, size_t, const blkptr_t *,
boolean_t);
static void mos_obj_refd(uint64_t);
static void mos_obj_refd_multiple(uint64_t);
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
static int dump_bpobj_cb(void *arg, const blkptr_t *bp, boolean_t free,
dmu_tx_t *tx);
typedef struct sublivelist_verify {
/* FREE's that haven't yet matched to an ALLOC, in one sub-livelist */
zfs_btree_t sv_pair;
/* ALLOC's without a matching FREE, accumulates across sub-livelists */
zfs_btree_t sv_leftover;
} sublivelist_verify_t;
static int
livelist_compare(const void *larg, const void *rarg)
{
const blkptr_t *l = larg;
const blkptr_t *r = rarg;
/* Sort them according to dva[0] */
uint64_t l_dva0_vdev, r_dva0_vdev;
l_dva0_vdev = DVA_GET_VDEV(&l->blk_dva[0]);
r_dva0_vdev = DVA_GET_VDEV(&r->blk_dva[0]);
if (l_dva0_vdev < r_dva0_vdev)
return (-1);
else if (l_dva0_vdev > r_dva0_vdev)
return (+1);
/* if vdevs are equal, sort by offsets. */
uint64_t l_dva0_offset;
uint64_t r_dva0_offset;
l_dva0_offset = DVA_GET_OFFSET(&l->blk_dva[0]);
r_dva0_offset = DVA_GET_OFFSET(&r->blk_dva[0]);
if (l_dva0_offset < r_dva0_offset) {
return (-1);
} else if (l_dva0_offset > r_dva0_offset) {
return (+1);
}
/*
* Since we're storing blkptrs without cancelling FREE/ALLOC pairs,
* it's possible the offsets are equal. In that case, sort by txg
*/
if (l->blk_birth < r->blk_birth) {
return (-1);
} else if (l->blk_birth > r->blk_birth) {
return (+1);
}
return (0);
}
typedef struct sublivelist_verify_block {
dva_t svb_dva;
/*
* We need this to check if the block marked as allocated
* in the livelist was freed (and potentially reallocated)
* in the metaslab spacemaps at a later TXG.
*/
uint64_t svb_allocated_txg;
} sublivelist_verify_block_t;
static void zdb_print_blkptr(const blkptr_t *bp, int flags);
typedef struct sublivelist_verify_block_refcnt {
/* block pointer entry in livelist being verified */
blkptr_t svbr_blk;
/*
* Refcount gets incremented to 1 when we encounter the first
* FREE entry for the svfbr block pointer and a node for it
* is created in our ZDB verification/tracking metadata.
*
* As we encounter more FREE entries we increment this counter
* and similarly decrement it whenever we find the respective
* ALLOC entries for this block.
*
* When the refcount gets to 0 it means that all the FREE and
* ALLOC entries of this block have paired up and we no longer
* need to track it in our verification logic (e.g. the node
* containing this struct in our verification data structure
* should be freed).
*
* [refer to sublivelist_verify_blkptr() for the actual code]
*/
uint32_t svbr_refcnt;
} sublivelist_verify_block_refcnt_t;
static int
sublivelist_block_refcnt_compare(const void *larg, const void *rarg)
{
const sublivelist_verify_block_refcnt_t *l = larg;
const sublivelist_verify_block_refcnt_t *r = rarg;
return (livelist_compare(&l->svbr_blk, &r->svbr_blk));
}
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
static int
sublivelist_verify_blkptr(void *arg, const blkptr_t *bp, boolean_t free,
dmu_tx_t *tx)
{
ASSERT3P(tx, ==, NULL);
struct sublivelist_verify *sv = arg;
sublivelist_verify_block_refcnt_t current = {
.svbr_blk = *bp,
/*
* Start with 1 in case this is the first free entry.
* This field is not used for our B-Tree comparisons
* anyway.
*/
.svbr_refcnt = 1,
};
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
zfs_btree_index_t where;
sublivelist_verify_block_refcnt_t *pair =
zfs_btree_find(&sv->sv_pair, &current, &where);
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
if (free) {
if (pair == NULL) {
/* first free entry for this block pointer */
zfs_btree_add(&sv->sv_pair, &current);
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
} else {
pair->svbr_refcnt++;
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
}
} else {
if (pair == NULL) {
/* block that is currently marked as allocated */
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
for (int i = 0; i < SPA_DVAS_PER_BP; i++) {
if (DVA_IS_EMPTY(&bp->blk_dva[i]))
break;
sublivelist_verify_block_t svb = {
.svb_dva = bp->blk_dva[i],
.svb_allocated_txg = bp->blk_birth
};
if (zfs_btree_find(&sv->sv_leftover, &svb,
&where) == NULL) {
zfs_btree_add_idx(&sv->sv_leftover,
&svb, &where);
}
}
} else {
/* alloc matches a free entry */
pair->svbr_refcnt--;
if (pair->svbr_refcnt == 0) {
/* all allocs and frees have been matched */
zfs_btree_remove_idx(&sv->sv_pair, &where);
}
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
}
}
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
return (0);
}
static int
sublivelist_verify_func(void *args, dsl_deadlist_entry_t *dle)
{
int err;
struct sublivelist_verify *sv = args;
zfs_btree_create(&sv->sv_pair, sublivelist_block_refcnt_compare,
sizeof (sublivelist_verify_block_refcnt_t));
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
err = bpobj_iterate_nofree(&dle->dle_bpobj, sublivelist_verify_blkptr,
sv, NULL);
sublivelist_verify_block_refcnt_t *e;
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
zfs_btree_index_t *cookie = NULL;
while ((e = zfs_btree_destroy_nodes(&sv->sv_pair, &cookie)) != NULL) {
char blkbuf[BP_SPRINTF_LEN];
snprintf_blkptr_compact(blkbuf, sizeof (blkbuf),
&e->svbr_blk, B_TRUE);
(void) printf("\tERROR: %d unmatched FREE(s): %s\n",
e->svbr_refcnt, blkbuf);
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
}
zfs_btree_destroy(&sv->sv_pair);
return (err);
}
static int
livelist_block_compare(const void *larg, const void *rarg)
{
const sublivelist_verify_block_t *l = larg;
const sublivelist_verify_block_t *r = rarg;
if (DVA_GET_VDEV(&l->svb_dva) < DVA_GET_VDEV(&r->svb_dva))
return (-1);
else if (DVA_GET_VDEV(&l->svb_dva) > DVA_GET_VDEV(&r->svb_dva))
return (+1);
if (DVA_GET_OFFSET(&l->svb_dva) < DVA_GET_OFFSET(&r->svb_dva))
return (-1);
else if (DVA_GET_OFFSET(&l->svb_dva) > DVA_GET_OFFSET(&r->svb_dva))
return (+1);
if (DVA_GET_ASIZE(&l->svb_dva) < DVA_GET_ASIZE(&r->svb_dva))
return (-1);
else if (DVA_GET_ASIZE(&l->svb_dva) > DVA_GET_ASIZE(&r->svb_dva))
return (+1);
return (0);
}
/*
* Check for errors in a livelist while tracking all unfreed ALLOCs in the
* sublivelist_verify_t: sv->sv_leftover
*/
static void
livelist_verify(dsl_deadlist_t *dl, void *arg)
{
sublivelist_verify_t *sv = arg;
dsl_deadlist_iterate(dl, sublivelist_verify_func, sv);
}
/*
* Check for errors in the livelist entry and discard the intermediary
* data structures
*/
/* ARGSUSED */
static int
sublivelist_verify_lightweight(void *args, dsl_deadlist_entry_t *dle)
{
sublivelist_verify_t sv;
zfs_btree_create(&sv.sv_leftover, livelist_block_compare,
sizeof (sublivelist_verify_block_t));
int err = sublivelist_verify_func(&sv, dle);
zfs_btree_clear(&sv.sv_leftover);
zfs_btree_destroy(&sv.sv_leftover);
return (err);
}
typedef struct metaslab_verify {
/*
* Tree containing all the leftover ALLOCs from the livelists
* that are part of this metaslab.
*/
zfs_btree_t mv_livelist_allocs;
/*
* Metaslab information.
*/
uint64_t mv_vdid;
uint64_t mv_msid;
uint64_t mv_start;
uint64_t mv_end;
/*
* What's currently allocated for this metaslab.
*/
range_tree_t *mv_allocated;
} metaslab_verify_t;
typedef void ll_iter_t(dsl_deadlist_t *ll, void *arg);
typedef int (*zdb_log_sm_cb_t)(spa_t *spa, space_map_entry_t *sme, uint64_t txg,
void *arg);
typedef struct unflushed_iter_cb_arg {
spa_t *uic_spa;
uint64_t uic_txg;
void *uic_arg;
zdb_log_sm_cb_t uic_cb;
} unflushed_iter_cb_arg_t;
static int
iterate_through_spacemap_logs_cb(space_map_entry_t *sme, void *arg)
{
unflushed_iter_cb_arg_t *uic = arg;
return (uic->uic_cb(uic->uic_spa, sme, uic->uic_txg, uic->uic_arg));
}
static void
iterate_through_spacemap_logs(spa_t *spa, zdb_log_sm_cb_t cb, void *arg)
{
if (!spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP))
return;
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
for (spa_log_sm_t *sls = avl_first(&spa->spa_sm_logs_by_txg);
sls; sls = AVL_NEXT(&spa->spa_sm_logs_by_txg, sls)) {
space_map_t *sm = NULL;
VERIFY0(space_map_open(&sm, spa_meta_objset(spa),
sls->sls_sm_obj, 0, UINT64_MAX, SPA_MINBLOCKSHIFT));
unflushed_iter_cb_arg_t uic = {
.uic_spa = spa,
.uic_txg = sls->sls_txg,
.uic_arg = arg,
.uic_cb = cb
};
VERIFY0(space_map_iterate(sm, space_map_length(sm),
iterate_through_spacemap_logs_cb, &uic));
space_map_close(sm);
}
spa_config_exit(spa, SCL_CONFIG, FTAG);
}
static void
verify_livelist_allocs(metaslab_verify_t *mv, uint64_t txg,
uint64_t offset, uint64_t size)
{
sublivelist_verify_block_t svb;
DVA_SET_VDEV(&svb.svb_dva, mv->mv_vdid);
DVA_SET_OFFSET(&svb.svb_dva, offset);
DVA_SET_ASIZE(&svb.svb_dva, size);
zfs_btree_index_t where;
uint64_t end_offset = offset + size;
/*
* Look for an exact match for spacemap entry in the livelist entries.
* Then, look for other livelist entries that fall within the range
* of the spacemap entry as it may have been condensed
*/
sublivelist_verify_block_t *found =
zfs_btree_find(&mv->mv_livelist_allocs, &svb, &where);
if (found == NULL) {
found = zfs_btree_next(&mv->mv_livelist_allocs, &where, &where);
}
for (; found != NULL && DVA_GET_VDEV(&found->svb_dva) == mv->mv_vdid &&
DVA_GET_OFFSET(&found->svb_dva) < end_offset;
found = zfs_btree_next(&mv->mv_livelist_allocs, &where, &where)) {
if (found->svb_allocated_txg <= txg) {
(void) printf("ERROR: Livelist ALLOC [%llx:%llx] "
"from TXG %llx FREED at TXG %llx\n",
(u_longlong_t)DVA_GET_OFFSET(&found->svb_dva),
(u_longlong_t)DVA_GET_ASIZE(&found->svb_dva),
(u_longlong_t)found->svb_allocated_txg,
(u_longlong_t)txg);
}
}
}
static int
metaslab_spacemap_validation_cb(space_map_entry_t *sme, void *arg)
{
metaslab_verify_t *mv = arg;
uint64_t offset = sme->sme_offset;
uint64_t size = sme->sme_run;
uint64_t txg = sme->sme_txg;
if (sme->sme_type == SM_ALLOC) {
if (range_tree_contains(mv->mv_allocated,
offset, size)) {
(void) printf("ERROR: DOUBLE ALLOC: "
"%llu [%llx:%llx] "
"%llu:%llu LOG_SM\n",
(u_longlong_t)txg, (u_longlong_t)offset,
(u_longlong_t)size, (u_longlong_t)mv->mv_vdid,
(u_longlong_t)mv->mv_msid);
} else {
range_tree_add(mv->mv_allocated,
offset, size);
}
} else {
if (!range_tree_contains(mv->mv_allocated,
offset, size)) {
(void) printf("ERROR: DOUBLE FREE: "
"%llu [%llx:%llx] "
"%llu:%llu LOG_SM\n",
(u_longlong_t)txg, (u_longlong_t)offset,
(u_longlong_t)size, (u_longlong_t)mv->mv_vdid,
(u_longlong_t)mv->mv_msid);
} else {
range_tree_remove(mv->mv_allocated,
offset, size);
}
}
if (sme->sme_type != SM_ALLOC) {
/*
* If something is freed in the spacemap, verify that
* it is not listed as allocated in the livelist.
*/
verify_livelist_allocs(mv, txg, offset, size);
}
return (0);
}
static int
spacemap_check_sm_log_cb(spa_t *spa, space_map_entry_t *sme,
uint64_t txg, void *arg)
{
metaslab_verify_t *mv = arg;
uint64_t offset = sme->sme_offset;
uint64_t vdev_id = sme->sme_vdev;
vdev_t *vd = vdev_lookup_top(spa, vdev_id);
/* skip indirect vdevs */
if (!vdev_is_concrete(vd))
return (0);
if (vdev_id != mv->mv_vdid)
return (0);
metaslab_t *ms = vd->vdev_ms[offset >> vd->vdev_ms_shift];
if (ms->ms_id != mv->mv_msid)
return (0);
if (txg < metaslab_unflushed_txg(ms))
return (0);
ASSERT3U(txg, ==, sme->sme_txg);
return (metaslab_spacemap_validation_cb(sme, mv));
}
static void
spacemap_check_sm_log(spa_t *spa, metaslab_verify_t *mv)
{
iterate_through_spacemap_logs(spa, spacemap_check_sm_log_cb, mv);
}
static void
spacemap_check_ms_sm(space_map_t *sm, metaslab_verify_t *mv)
{
if (sm == NULL)
return;
VERIFY0(space_map_iterate(sm, space_map_length(sm),
metaslab_spacemap_validation_cb, mv));
}
static void iterate_deleted_livelists(spa_t *spa, ll_iter_t func, void *arg);
/*
* Transfer blocks from sv_leftover tree to the mv_livelist_allocs if
* they are part of that metaslab (mv_msid).
*/
static void
mv_populate_livelist_allocs(metaslab_verify_t *mv, sublivelist_verify_t *sv)
{
zfs_btree_index_t where;
sublivelist_verify_block_t *svb;
ASSERT3U(zfs_btree_numnodes(&mv->mv_livelist_allocs), ==, 0);
for (svb = zfs_btree_first(&sv->sv_leftover, &where);
svb != NULL;
svb = zfs_btree_next(&sv->sv_leftover, &where, &where)) {
if (DVA_GET_VDEV(&svb->svb_dva) != mv->mv_vdid)
continue;
if (DVA_GET_OFFSET(&svb->svb_dva) < mv->mv_start &&
(DVA_GET_OFFSET(&svb->svb_dva) +
DVA_GET_ASIZE(&svb->svb_dva)) > mv->mv_start) {
(void) printf("ERROR: Found block that crosses "
"metaslab boundary: <%llu:%llx:%llx>\n",
(u_longlong_t)DVA_GET_VDEV(&svb->svb_dva),
(u_longlong_t)DVA_GET_OFFSET(&svb->svb_dva),
(u_longlong_t)DVA_GET_ASIZE(&svb->svb_dva));
continue;
}
if (DVA_GET_OFFSET(&svb->svb_dva) < mv->mv_start)
continue;
if (DVA_GET_OFFSET(&svb->svb_dva) >= mv->mv_end)
continue;
if ((DVA_GET_OFFSET(&svb->svb_dva) +
DVA_GET_ASIZE(&svb->svb_dva)) > mv->mv_end) {
(void) printf("ERROR: Found block that crosses "
"metaslab boundary: <%llu:%llx:%llx>\n",
(u_longlong_t)DVA_GET_VDEV(&svb->svb_dva),
(u_longlong_t)DVA_GET_OFFSET(&svb->svb_dva),
(u_longlong_t)DVA_GET_ASIZE(&svb->svb_dva));
continue;
}
zfs_btree_add(&mv->mv_livelist_allocs, svb);
}
for (svb = zfs_btree_first(&mv->mv_livelist_allocs, &where);
svb != NULL;
svb = zfs_btree_next(&mv->mv_livelist_allocs, &where, &where)) {
zfs_btree_remove(&sv->sv_leftover, svb);
}
}
/*
* [Livelist Check]
* Iterate through all the sublivelists and:
* - report leftover frees (**)
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
* - record leftover ALLOCs together with their TXG [see Cross Check]
*
* (**) Note: Double ALLOCs are valid in datasets that have dedup
* enabled. Similarly double FREEs are allowed as well but
* only if they pair up with a corresponding ALLOC entry once
* we our done with our sublivelist iteration.
*
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
* [Spacemap Check]
* for each metaslab:
* - iterate over spacemap and then the metaslab's entries in the
* spacemap log, then report any double FREEs and ALLOCs (do not
* blow up).
*
* [Cross Check]
* After finishing the Livelist Check phase and while being in the
* Spacemap Check phase, we find all the recorded leftover ALLOCs
* of the livelist check that are part of the metaslab that we are
* currently looking at in the Spacemap Check. We report any entries
* that are marked as ALLOCs in the livelists but have been actually
* freed (and potentially allocated again) after their TXG stamp in
* the spacemaps. Also report any ALLOCs from the livelists that
* belong to indirect vdevs (e.g. their vdev completed removal).
*
* Note that this will miss Log Spacemap entries that cancelled each other
* out before being flushed to the metaslab, so we are not guaranteed
* to match all erroneous ALLOCs.
*/
static void
livelist_metaslab_validate(spa_t *spa)
{
(void) printf("Verifying deleted livelist entries\n");
sublivelist_verify_t sv;
zfs_btree_create(&sv.sv_leftover, livelist_block_compare,
sizeof (sublivelist_verify_block_t));
iterate_deleted_livelists(spa, livelist_verify, &sv);
(void) printf("Verifying metaslab entries\n");
vdev_t *rvd = spa->spa_root_vdev;
for (uint64_t c = 0; c < rvd->vdev_children; c++) {
vdev_t *vd = rvd->vdev_child[c];
if (!vdev_is_concrete(vd))
continue;
for (uint64_t mid = 0; mid < vd->vdev_ms_count; mid++) {
metaslab_t *m = vd->vdev_ms[mid];
(void) fprintf(stderr,
"\rverifying concrete vdev %llu, "
"metaslab %llu of %llu ...",
(longlong_t)vd->vdev_id,
(longlong_t)mid,
(longlong_t)vd->vdev_ms_count);
uint64_t shift, start;
range_seg_type_t type =
metaslab_calculate_range_tree_type(vd, m,
&start, &shift);
metaslab_verify_t mv;
mv.mv_allocated = range_tree_create(NULL,
type, NULL, start, shift);
mv.mv_vdid = vd->vdev_id;
mv.mv_msid = m->ms_id;
mv.mv_start = m->ms_start;
mv.mv_end = m->ms_start + m->ms_size;
zfs_btree_create(&mv.mv_livelist_allocs,
livelist_block_compare,
sizeof (sublivelist_verify_block_t));
mv_populate_livelist_allocs(&mv, &sv);
spacemap_check_ms_sm(m->ms_sm, &mv);
spacemap_check_sm_log(spa, &mv);
range_tree_vacate(mv.mv_allocated, NULL, NULL);
range_tree_destroy(mv.mv_allocated);
zfs_btree_clear(&mv.mv_livelist_allocs);
zfs_btree_destroy(&mv.mv_livelist_allocs);
}
}
(void) fprintf(stderr, "\n");
/*
* If there are any segments in the leftover tree after we walked
* through all the metaslabs in the concrete vdevs then this means
* that we have segments in the livelists that belong to indirect
* vdevs and are marked as allocated.
*/
if (zfs_btree_numnodes(&sv.sv_leftover) == 0) {
zfs_btree_destroy(&sv.sv_leftover);
return;
}
(void) printf("ERROR: Found livelist blocks marked as allocated "
"for indirect vdevs:\n");
zfs_btree_index_t *where = NULL;
sublivelist_verify_block_t *svb;
while ((svb = zfs_btree_destroy_nodes(&sv.sv_leftover, &where)) !=
NULL) {
int vdev_id = DVA_GET_VDEV(&svb->svb_dva);
ASSERT3U(vdev_id, <, rvd->vdev_children);
vdev_t *vd = rvd->vdev_child[vdev_id];
ASSERT(!vdev_is_concrete(vd));
(void) printf("<%d:%llx:%llx> TXG %llx\n",
vdev_id, (u_longlong_t)DVA_GET_OFFSET(&svb->svb_dva),
(u_longlong_t)DVA_GET_ASIZE(&svb->svb_dva),
(u_longlong_t)svb->svb_allocated_txg);
}
(void) printf("\n");
zfs_btree_destroy(&sv.sv_leftover);
}
2008-11-20 20:01:55 +00:00
/*
* These libumem hooks provide a reasonable set of defaults for the allocator's
* debugging facilities.
*/
const char *
_umem_debug_init(void)
2008-11-20 20:01:55 +00:00
{
return ("default,verbose"); /* $UMEM_DEBUG setting */
}
const char *
_umem_logging_init(void)
{
return ("fail,contents"); /* $UMEM_LOGGING setting */
}
static void
usage(void)
{
(void) fprintf(stderr,
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
"Usage:\t%s [-AbcdDFGhikLMPsvXy] [-e [-V] [-p <path> ...]] "
"[-I <inflight I/Os>]\n"
"\t\t[-o <var>=<value>]... [-t <txg>] [-U <cache>] [-x <dumpdir>]\n"
2020-01-24 19:00:46 +00:00
"\t\t[<poolname>[/<dataset | objset id>] [<object | range> ...]]\n"
"\t%s [-AdiPv] [-e [-V] [-p <path> ...]] [-U <cache>]\n"
2020-01-24 19:00:46 +00:00
"\t\t[<poolname>[/<dataset | objset id>] [<object | range> ...]\n"
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
"\t%s [-v] <bookmark>\n"
"\t%s -C [-A] [-U <cache>]\n"
"\t%s -l [-Aqu] <device>\n"
"\t%s -m [-AFLPX] [-e [-V] [-p <path> ...]] [-t <txg>] "
"[-U <cache>]\n\t\t<poolname> [<vdev> [<metaslab> ...]]\n"
"\t%s -O <dataset> <path>\n"
"\t%s -r <dataset> <path> <destination>\n"
"\t%s -R [-A] [-e [-V] [-p <path> ...]] [-U <cache>]\n"
"\t\t<poolname> <vdev>:<offset>:<size>[:<flags>]\n"
"\t%s -E [-A] word0:word1:...:word15\n"
"\t%s -S [-AP] [-e [-V] [-p <path> ...]] [-U <cache>] "
"<poolname>\n\n",
cmdname, cmdname, cmdname, cmdname, cmdname, cmdname, cmdname,
cmdname, cmdname, cmdname, cmdname);
(void) fprintf(stderr, " Dataset name must include at least one "
"separator character '/' or '@'\n");
(void) fprintf(stderr, " If dataset name is specified, only that "
"dataset is dumped\n");
2020-01-24 19:00:46 +00:00
(void) fprintf(stderr, " If object numbers or object number "
"ranges are specified, only those\n"
" objects or ranges are dumped.\n\n");
(void) fprintf(stderr,
" Object ranges take the form <start>:<end>[:<flags>]\n"
" start Starting object number\n"
" end Ending object number, or -1 for no upper bound\n"
" flags Optional flags to select object types:\n"
" A All objects (this is the default)\n"
" d ZFS directories\n"
" f ZFS files \n"
" m SPA space maps\n"
" z ZAPs\n"
" - Negate effect of next flag\n\n");
(void) fprintf(stderr, " Options to control amount of output:\n");
(void) fprintf(stderr, " -b block statistics\n");
(void) fprintf(stderr, " -c checksum all metadata (twice for "
2009-07-02 22:44:48 +00:00
"all data) blocks\n");
(void) fprintf(stderr, " -C config (or cachefile if alone)\n");
(void) fprintf(stderr, " -d dataset(s)\n");
(void) fprintf(stderr, " -D dedup statistics\n");
(void) fprintf(stderr, " -E decode and display block from an "
"embedded block pointer\n");
(void) fprintf(stderr, " -h pool history\n");
(void) fprintf(stderr, " -i intent logs\n");
(void) fprintf(stderr, " -l read label contents\n");
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
(void) fprintf(stderr, " -k examine the checkpointed state "
"of the pool\n");
2009-01-15 21:59:39 +00:00
(void) fprintf(stderr, " -L disable leak tracking (do not "
"load spacemaps)\n");
(void) fprintf(stderr, " -m metaslabs\n");
(void) fprintf(stderr, " -M metaslab groups\n");
(void) fprintf(stderr, " -O perform object lookups by path\n");
(void) fprintf(stderr, " -r copy an object by path to file\n");
2008-11-20 20:01:55 +00:00
(void) fprintf(stderr, " -R read and display block from a "
"device\n");
(void) fprintf(stderr, " -s report stats on zdb's I/O\n");
(void) fprintf(stderr, " -S simulate dedup to measure effect\n");
(void) fprintf(stderr, " -v verbose (applies to all "
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
"others)\n");
(void) fprintf(stderr, " -y perform livelist and metaslab "
"validation on any livelists being deleted\n\n");
(void) fprintf(stderr, " Below options are intended for use "
"with other options:\n");
(void) fprintf(stderr, " -A ignore assertions (-A), enable "
"panic recovery (-AA) or both (-AAA)\n");
(void) fprintf(stderr, " -e pool is exported/destroyed/"
"has altroot/not in a cachefile\n");
(void) fprintf(stderr, " -F attempt automatic rewind within "
"safe range of transaction groups\n");
(void) fprintf(stderr, " -G dump zfs_dbgmsg buffer before "
"exiting\n");
(void) fprintf(stderr, " -I <number of inflight I/Os> -- "
"specify the maximum number of\n "
"checksumming I/Os [default is 200]\n");
(void) fprintf(stderr, " -o <variable>=<value> set global "
"variable to an unsigned 32-bit integer\n");
(void) fprintf(stderr, " -p <path> -- use one or more with "
"-e to specify path to vdev dir\n");
(void) fprintf(stderr, " -P print numbers in parseable form\n");
(void) fprintf(stderr, " -q don't print label contents\n");
(void) fprintf(stderr, " -t <txg> -- highest txg to use when "
"searching for uberblocks\n");
(void) fprintf(stderr, " -u uberblock\n");
(void) fprintf(stderr, " -U <cachefile_path> -- use alternate "
"cachefile\n");
(void) fprintf(stderr, " -V do verbatim import\n");
(void) fprintf(stderr, " -x <dumpdir> -- "
"dump all read blocks into specified directory\n");
(void) fprintf(stderr, " -X attempt extreme rewind (does not "
"work with dataset)\n");
ztest: split block reconstruction Increase the default allowed number of reconstruction attempts. There's not an exact right number for this setting. It needs to be set large enough to cover any realistic failure scenarios and small enough to avoid stalling the IO pipeline and invoking the dead man detection. The current value of 256 was empirically determined to be too low based on multi-day runs of ztest. The fault injection code would inject more damage than could be reconstructed given the relatively small number of attempts. However, in all observed cases the block could be reconstructed using a slightly higher limit. Based on local testing increasing the default value to 4096 was determined to strike the best balance. Checking all combinations takes less than 10s in the worst case, and has so far eliminated the vast majority of false positives detected by ztest. This delay is roughly on par with how long retries may be performed to a misbehaving HDD and was deemed to be reasonable. Better to err on the side of a brief delay rather than fail to reconstruct the data. Lastly, the -Y flag has been added to zdb to make it easy to try all possible combinations when performing split block reconstruction. For badly damaged blocks with 18 splits, they can be fully enumerated within a few minutes. This has been done to ensure permanent errors are never incorrectly reported when ztest verifies the pool with zdb. Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8271
2019-01-16 22:10:02 +00:00
(void) fprintf(stderr, " -Y attempt all reconstruction "
"combinations for split blocks\n");
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
(void) fprintf(stderr, " -Z show ZSTD headers \n");
2008-11-20 20:01:55 +00:00
(void) fprintf(stderr, "Specify an option more than once (e.g. -bb) "
"to make only that option verbose\n");
(void) fprintf(stderr, "Default is to dump everything non-verbosely\n");
exit(1);
}
static void
dump_debug_buffer(void)
{
if (dump_opt['G']) {
(void) printf("\n");
(void) fflush(stdout);
zfs_dbgmsg_print("zdb");
}
}
2009-07-02 22:44:48 +00:00
/*
* Called for usage errors that are discovered after a call to spa_open(),
* dmu_bonus_hold(), or pool_match(). abort() is called for other errors.
*/
2008-11-20 20:01:55 +00:00
static void
fatal(const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
(void) fprintf(stderr, "%s: ", cmdname);
(void) vfprintf(stderr, fmt, ap);
va_end(ap);
(void) fprintf(stderr, "\n");
dump_debug_buffer();
2009-07-02 22:44:48 +00:00
exit(1);
2008-11-20 20:01:55 +00:00
}
/* ARGSUSED */
static void
dump_packed_nvlist(objset_t *os, uint64_t object, void *data, size_t size)
{
nvlist_t *nv;
size_t nvsize = *(uint64_t *)data;
char *packed = umem_alloc(nvsize, UMEM_NOFAIL);
2009-07-02 22:44:48 +00:00
VERIFY(0 == dmu_read(os, object, 0, nvsize, packed, DMU_READ_PREFETCH));
2008-11-20 20:01:55 +00:00
VERIFY(nvlist_unpack(packed, nvsize, &nv, 0) == 0);
umem_free(packed, nvsize);
dump_nvlist(nv, 8);
nvlist_free(nv);
}
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
/* ARGSUSED */
static void
dump_history_offsets(objset_t *os, uint64_t object, void *data, size_t size)
{
spa_history_phys_t *shp = data;
if (shp == NULL)
return;
(void) printf("\t\tpool_create_len = %llu\n",
(u_longlong_t)shp->sh_pool_create_len);
(void) printf("\t\tphys_max_off = %llu\n",
(u_longlong_t)shp->sh_phys_max_off);
(void) printf("\t\tbof = %llu\n",
(u_longlong_t)shp->sh_bof);
(void) printf("\t\teof = %llu\n",
(u_longlong_t)shp->sh_eof);
(void) printf("\t\trecords_lost = %llu\n",
(u_longlong_t)shp->sh_records_lost);
}
static void
zdb_nicenum(uint64_t num, char *buf, size_t buflen)
{
if (dump_opt['P'])
(void) snprintf(buf, buflen, "%llu", (longlong_t)num);
else
nicenum(num, buf, sizeof (buf));
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
static const char histo_stars[] = "****************************************";
static const uint64_t histo_width = sizeof (histo_stars) - 1;
2008-11-20 20:01:55 +00:00
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
dump_histogram(const uint64_t *histo, int size, int offset)
2008-11-20 20:01:55 +00:00
{
int i;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
int minidx = size - 1;
2008-11-20 20:01:55 +00:00
int maxidx = 0;
uint64_t max = 0;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
for (i = 0; i < size; i++) {
2008-11-20 20:01:55 +00:00
if (histo[i] > max)
max = histo[i];
if (histo[i] > 0 && i > maxidx)
maxidx = i;
if (histo[i] > 0 && i < minidx)
minidx = i;
}
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
if (max < histo_width)
max = histo_width;
2008-11-20 20:01:55 +00:00
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
for (i = minidx; i <= maxidx; i++) {
(void) printf("\t\t\t%3u: %6llu %s\n",
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
i + offset, (u_longlong_t)histo[i],
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
&histo_stars[(max - histo[i]) * histo_width / max]);
}
2008-11-20 20:01:55 +00:00
}
static void
dump_zap_stats(objset_t *os, uint64_t object)
{
int error;
zap_stats_t zs;
error = zap_get_stats(os, object, &zs);
if (error)
return;
if (zs.zs_ptrtbl_len == 0) {
ASSERT(zs.zs_num_blocks == 1);
(void) printf("\tmicrozap: %llu bytes, %llu entries\n",
(u_longlong_t)zs.zs_blocksize,
(u_longlong_t)zs.zs_num_entries);
return;
}
(void) printf("\tFat ZAP stats:\n");
(void) printf("\t\tPointer table:\n");
(void) printf("\t\t\t%llu elements\n",
(u_longlong_t)zs.zs_ptrtbl_len);
(void) printf("\t\t\tzt_blk: %llu\n",
(u_longlong_t)zs.zs_ptrtbl_zt_blk);
(void) printf("\t\t\tzt_numblks: %llu\n",
(u_longlong_t)zs.zs_ptrtbl_zt_numblks);
(void) printf("\t\t\tzt_shift: %llu\n",
(u_longlong_t)zs.zs_ptrtbl_zt_shift);
(void) printf("\t\t\tzt_blks_copied: %llu\n",
(u_longlong_t)zs.zs_ptrtbl_blks_copied);
(void) printf("\t\t\tzt_nextblk: %llu\n",
(u_longlong_t)zs.zs_ptrtbl_nextblk);
(void) printf("\t\tZAP entries: %llu\n",
(u_longlong_t)zs.zs_num_entries);
(void) printf("\t\tLeaf blocks: %llu\n",
(u_longlong_t)zs.zs_num_leafs);
(void) printf("\t\tTotal blocks: %llu\n",
(u_longlong_t)zs.zs_num_blocks);
(void) printf("\t\tzap_block_type: 0x%llx\n",
(u_longlong_t)zs.zs_block_type);
(void) printf("\t\tzap_magic: 0x%llx\n",
(u_longlong_t)zs.zs_magic);
(void) printf("\t\tzap_salt: 0x%llx\n",
(u_longlong_t)zs.zs_salt);
(void) printf("\t\tLeafs with 2^n pointers:\n");
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
dump_histogram(zs.zs_leafs_with_2n_pointers, ZAP_HISTOGRAM_SIZE, 0);
2008-11-20 20:01:55 +00:00
(void) printf("\t\tBlocks with n*5 entries:\n");
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
dump_histogram(zs.zs_blocks_with_n5_entries, ZAP_HISTOGRAM_SIZE, 0);
2008-11-20 20:01:55 +00:00
(void) printf("\t\tBlocks n/10 full:\n");
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
dump_histogram(zs.zs_blocks_n_tenths_full, ZAP_HISTOGRAM_SIZE, 0);
2008-11-20 20:01:55 +00:00
(void) printf("\t\tEntries with n chunks:\n");
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
dump_histogram(zs.zs_entries_using_n_chunks, ZAP_HISTOGRAM_SIZE, 0);
2008-11-20 20:01:55 +00:00
(void) printf("\t\tBuckets with n entries:\n");
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
dump_histogram(zs.zs_buckets_with_n_entries, ZAP_HISTOGRAM_SIZE, 0);
2008-11-20 20:01:55 +00:00
}
/*ARGSUSED*/
static void
dump_none(objset_t *os, uint64_t object, void *data, size_t size)
{
}
/*ARGSUSED*/
static void
dump_unknown(objset_t *os, uint64_t object, void *data, size_t size)
{
(void) printf("\tUNKNOWN OBJECT TYPE\n");
}
2008-11-20 20:01:55 +00:00
/*ARGSUSED*/
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
static void
2008-11-20 20:01:55 +00:00
dump_uint8(objset_t *os, uint64_t object, void *data, size_t size)
{
}
/*ARGSUSED*/
static void
dump_uint64(objset_t *os, uint64_t object, void *data, size_t size)
{
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
uint64_t *arr;
uint64_t oursize;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
if (dump_opt['d'] < 6)
return;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
if (data == NULL) {
dmu_object_info_t doi;
VERIFY0(dmu_object_info(os, object, &doi));
size = doi.doi_max_offset;
/*
* We cap the size at 1 mebibyte here to prevent
* allocation failures and nigh-infinite printing if the
* object is extremely large.
*/
oursize = MIN(size, 1 << 20);
arr = kmem_alloc(oursize, KM_SLEEP);
int err = dmu_read(os, object, 0, oursize, arr, 0);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
if (err != 0) {
(void) printf("got error %u from dmu_read\n", err);
kmem_free(arr, oursize);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
return;
}
} else {
/*
* Even though the allocation is already done in this code path,
* we still cap the size to prevent excessive printing.
*/
oursize = MIN(size, 1 << 20);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
arr = data;
}
if (size == 0) {
(void) printf("\t\t[]\n");
return;
}
(void) printf("\t\t[%0llx", (u_longlong_t)arr[0]);
for (size_t i = 1; i * sizeof (uint64_t) < oursize; i++) {
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
if (i % 4 != 0)
(void) printf(", %0llx", (u_longlong_t)arr[i]);
else
(void) printf(",\n\t\t%0llx", (u_longlong_t)arr[i]);
}
if (oursize != size)
(void) printf(", ... ");
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
(void) printf("]\n");
if (data == NULL)
kmem_free(arr, oursize);
2008-11-20 20:01:55 +00:00
}
/*ARGSUSED*/
static void
dump_zap(objset_t *os, uint64_t object, void *data, size_t size)
{
zap_cursor_t zc;
zap_attribute_t attr;
void *prop;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
unsigned i;
2008-11-20 20:01:55 +00:00
dump_zap_stats(os, object);
(void) printf("\n");
for (zap_cursor_init(&zc, os, object);
zap_cursor_retrieve(&zc, &attr) == 0;
zap_cursor_advance(&zc)) {
(void) printf("\t\t%s = ", attr.za_name);
if (attr.za_num_integers == 0) {
(void) printf("\n");
continue;
}
prop = umem_zalloc(attr.za_num_integers *
attr.za_integer_length, UMEM_NOFAIL);
(void) zap_lookup(os, object, attr.za_name,
attr.za_integer_length, attr.za_num_integers, prop);
if (attr.za_integer_length == 1) {
if (strcmp(attr.za_name,
DSL_CRYPTO_KEY_MASTER_KEY) == 0 ||
strcmp(attr.za_name,
DSL_CRYPTO_KEY_HMAC_KEY) == 0 ||
strcmp(attr.za_name, DSL_CRYPTO_KEY_IV) == 0 ||
strcmp(attr.za_name, DSL_CRYPTO_KEY_MAC) == 0 ||
strcmp(attr.za_name, DMU_POOL_CHECKSUM_SALT) == 0) {
uint8_t *u8 = prop;
for (i = 0; i < attr.za_num_integers; i++) {
(void) printf("%02x", u8[i]);
}
} else {
(void) printf("%s", (char *)prop);
}
2008-11-20 20:01:55 +00:00
} else {
for (i = 0; i < attr.za_num_integers; i++) {
switch (attr.za_integer_length) {
case 2:
(void) printf("%u ",
((uint16_t *)prop)[i]);
break;
case 4:
(void) printf("%u ",
((uint32_t *)prop)[i]);
break;
case 8:
(void) printf("%lld ",
(u_longlong_t)((int64_t *)prop)[i]);
break;
}
}
}
(void) printf("\n");
umem_free(prop, attr.za_num_integers * attr.za_integer_length);
}
zap_cursor_fini(&zc);
}
static void
dump_bpobj(objset_t *os, uint64_t object, void *data, size_t size)
{
bpobj_phys_t *bpop = data;
uint64_t i;
char bytes[32], comp[32], uncomp[32];
/* make sure the output won't get truncated */
CTASSERT(sizeof (bytes) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (comp) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (uncomp) >= NN_NUMBUF_SZ);
if (bpop == NULL)
return;
zdb_nicenum(bpop->bpo_bytes, bytes, sizeof (bytes));
zdb_nicenum(bpop->bpo_comp, comp, sizeof (comp));
zdb_nicenum(bpop->bpo_uncomp, uncomp, sizeof (uncomp));
(void) printf("\t\tnum_blkptrs = %llu\n",
(u_longlong_t)bpop->bpo_num_blkptrs);
(void) printf("\t\tbytes = %s\n", bytes);
if (size >= BPOBJ_SIZE_V1) {
(void) printf("\t\tcomp = %s\n", comp);
(void) printf("\t\tuncomp = %s\n", uncomp);
}
if (size >= BPOBJ_SIZE_V2) {
(void) printf("\t\tsubobjs = %llu\n",
(u_longlong_t)bpop->bpo_subobjs);
(void) printf("\t\tnum_subobjs = %llu\n",
(u_longlong_t)bpop->bpo_num_subobjs);
}
if (size >= sizeof (*bpop)) {
(void) printf("\t\tnum_freed = %llu\n",
(u_longlong_t)bpop->bpo_num_freed);
}
if (dump_opt['d'] < 5)
return;
for (i = 0; i < bpop->bpo_num_blkptrs; i++) {
char blkbuf[BP_SPRINTF_LEN];
blkptr_t bp;
int err = dmu_read(os, object,
i * sizeof (bp), sizeof (bp), &bp, 0);
if (err != 0) {
(void) printf("got error %u from dmu_read\n", err);
break;
}
snprintf_blkptr_compact(blkbuf, sizeof (blkbuf), &bp,
BP_GET_FREE(&bp));
(void) printf("\t%s\n", blkbuf);
}
}
/* ARGSUSED */
static void
dump_bpobj_subobjs(objset_t *os, uint64_t object, void *data, size_t size)
{
dmu_object_info_t doi;
int64_t i;
VERIFY0(dmu_object_info(os, object, &doi));
uint64_t *subobjs = kmem_alloc(doi.doi_max_offset, KM_SLEEP);
int err = dmu_read(os, object, 0, doi.doi_max_offset, subobjs, 0);
if (err != 0) {
(void) printf("got error %u from dmu_read\n", err);
kmem_free(subobjs, doi.doi_max_offset);
return;
}
int64_t last_nonzero = -1;
for (i = 0; i < doi.doi_max_offset / 8; i++) {
if (subobjs[i] != 0)
last_nonzero = i;
}
for (i = 0; i <= last_nonzero; i++) {
(void) printf("\t%llu\n", (u_longlong_t)subobjs[i]);
}
kmem_free(subobjs, doi.doi_max_offset);
}
/*ARGSUSED*/
static void
dump_ddt_zap(objset_t *os, uint64_t object, void *data, size_t size)
{
dump_zap_stats(os, object);
/* contents are printed elsewhere, properly decoded */
}
/*ARGSUSED*/
static void
dump_sa_attrs(objset_t *os, uint64_t object, void *data, size_t size)
{
zap_cursor_t zc;
zap_attribute_t attr;
dump_zap_stats(os, object);
(void) printf("\n");
for (zap_cursor_init(&zc, os, object);
zap_cursor_retrieve(&zc, &attr) == 0;
zap_cursor_advance(&zc)) {
(void) printf("\t\t%s = ", attr.za_name);
if (attr.za_num_integers == 0) {
(void) printf("\n");
continue;
}
(void) printf(" %llx : [%d:%d:%d]\n",
(u_longlong_t)attr.za_first_integer,
(int)ATTR_LENGTH(attr.za_first_integer),
(int)ATTR_BSWAP(attr.za_first_integer),
(int)ATTR_NUM(attr.za_first_integer));
}
zap_cursor_fini(&zc);
}
/*ARGSUSED*/
static void
dump_sa_layouts(objset_t *os, uint64_t object, void *data, size_t size)
{
zap_cursor_t zc;
zap_attribute_t attr;
uint16_t *layout_attrs;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
unsigned i;
dump_zap_stats(os, object);
(void) printf("\n");
for (zap_cursor_init(&zc, os, object);
zap_cursor_retrieve(&zc, &attr) == 0;
zap_cursor_advance(&zc)) {
(void) printf("\t\t%s = [", attr.za_name);
if (attr.za_num_integers == 0) {
(void) printf("\n");
continue;
}
VERIFY(attr.za_integer_length == 2);
layout_attrs = umem_zalloc(attr.za_num_integers *
attr.za_integer_length, UMEM_NOFAIL);
VERIFY(zap_lookup(os, object, attr.za_name,
attr.za_integer_length,
attr.za_num_integers, layout_attrs) == 0);
for (i = 0; i != attr.za_num_integers; i++)
(void) printf(" %d ", (int)layout_attrs[i]);
(void) printf("]\n");
umem_free(layout_attrs,
attr.za_num_integers * attr.za_integer_length);
}
zap_cursor_fini(&zc);
}
2008-11-20 20:01:55 +00:00
/*ARGSUSED*/
static void
dump_zpldir(objset_t *os, uint64_t object, void *data, size_t size)
{
zap_cursor_t zc;
zap_attribute_t attr;
const char *typenames[] = {
/* 0 */ "not specified",
/* 1 */ "FIFO",
/* 2 */ "Character Device",
/* 3 */ "3 (invalid)",
/* 4 */ "Directory",
/* 5 */ "5 (invalid)",
/* 6 */ "Block Device",
/* 7 */ "7 (invalid)",
/* 8 */ "Regular File",
/* 9 */ "9 (invalid)",
/* 10 */ "Symbolic Link",
/* 11 */ "11 (invalid)",
/* 12 */ "Socket",
/* 13 */ "Door",
/* 14 */ "Event Port",
/* 15 */ "15 (invalid)",
};
dump_zap_stats(os, object);
(void) printf("\n");
for (zap_cursor_init(&zc, os, object);
zap_cursor_retrieve(&zc, &attr) == 0;
zap_cursor_advance(&zc)) {
(void) printf("\t\t%s = %lld (type: %s)\n",
attr.za_name, ZFS_DIRENT_OBJ(attr.za_first_integer),
typenames[ZFS_DIRENT_TYPE(attr.za_first_integer)]);
}
zap_cursor_fini(&zc);
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
static int
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
get_dtl_refcount(vdev_t *vd)
{
int refcount = 0;
if (vd->vdev_ops->vdev_op_leaf) {
space_map_t *sm = vd->vdev_dtl_sm;
if (sm != NULL &&
sm->sm_dbuf->db_size == sizeof (space_map_phys_t))
return (1);
return (0);
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
for (unsigned c = 0; c < vd->vdev_children; c++)
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
refcount += get_dtl_refcount(vd->vdev_child[c]);
return (refcount);
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
static int
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
get_metaslab_refcount(vdev_t *vd)
{
int refcount = 0;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
if (vd->vdev_top == vd) {
for (uint64_t m = 0; m < vd->vdev_ms_count; m++) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
space_map_t *sm = vd->vdev_ms[m]->ms_sm;
if (sm != NULL &&
sm->sm_dbuf->db_size == sizeof (space_map_phys_t))
refcount++;
}
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
for (unsigned c = 0; c < vd->vdev_children; c++)
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
refcount += get_metaslab_refcount(vd->vdev_child[c]);
return (refcount);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
static int
get_obsolete_refcount(vdev_t *vd)
{
uint64_t obsolete_sm_object;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
int refcount = 0;
VERIFY0(vdev_obsolete_sm_object(vd, &obsolete_sm_object));
if (vd->vdev_top == vd && obsolete_sm_object != 0) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
dmu_object_info_t doi;
VERIFY0(dmu_object_info(vd->vdev_spa->spa_meta_objset,
obsolete_sm_object, &doi));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
if (doi.doi_bonus_size == sizeof (space_map_phys_t)) {
refcount++;
}
} else {
ASSERT3P(vd->vdev_obsolete_sm, ==, NULL);
ASSERT3U(obsolete_sm_object, ==, 0);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
}
for (unsigned c = 0; c < vd->vdev_children; c++) {
refcount += get_obsolete_refcount(vd->vdev_child[c]);
}
return (refcount);
}
static int
get_prev_obsolete_spacemap_refcount(spa_t *spa)
{
uint64_t prev_obj =
spa->spa_condensing_indirect_phys.scip_prev_obsolete_sm_object;
if (prev_obj != 0) {
dmu_object_info_t doi;
VERIFY0(dmu_object_info(spa->spa_meta_objset, prev_obj, &doi));
if (doi.doi_bonus_size == sizeof (space_map_phys_t)) {
return (1);
}
}
return (0);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
static int
get_checkpoint_refcount(vdev_t *vd)
{
int refcount = 0;
if (vd->vdev_top == vd && vd->vdev_top_zap != 0 &&
zap_contains(spa_meta_objset(vd->vdev_spa),
vd->vdev_top_zap, VDEV_TOP_ZAP_POOL_CHECKPOINT_SM) == 0)
refcount++;
for (uint64_t c = 0; c < vd->vdev_children; c++)
refcount += get_checkpoint_refcount(vd->vdev_child[c]);
return (refcount);
}
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
static int
get_log_spacemap_refcount(spa_t *spa)
{
return (avl_numnodes(&spa->spa_sm_logs_by_txg));
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
static int
verify_spacemap_refcounts(spa_t *spa)
{
uint64_t expected_refcount = 0;
uint64_t actual_refcount;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
(void) feature_get_refcount(spa,
&spa_feature_table[SPA_FEATURE_SPACEMAP_HISTOGRAM],
&expected_refcount);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
actual_refcount = get_dtl_refcount(spa->spa_root_vdev);
actual_refcount += get_metaslab_refcount(spa->spa_root_vdev);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
actual_refcount += get_obsolete_refcount(spa->spa_root_vdev);
actual_refcount += get_prev_obsolete_spacemap_refcount(spa);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
actual_refcount += get_checkpoint_refcount(spa->spa_root_vdev);
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
actual_refcount += get_log_spacemap_refcount(spa);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (expected_refcount != actual_refcount) {
(void) printf("space map refcount mismatch: expected %lld != "
"actual %lld\n",
(longlong_t)expected_refcount,
(longlong_t)actual_refcount);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
return (2);
}
return (0);
}
2008-11-20 20:01:55 +00:00
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
dump_spacemap(objset_t *os, space_map_t *sm)
2008-11-20 20:01:55 +00:00
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
const char *ddata[] = { "ALLOC", "FREE", "CONDENSE", "INVALID",
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
"INVALID", "INVALID", "INVALID", "INVALID" };
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (sm == NULL)
2008-11-20 20:01:55 +00:00
return;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
(void) printf("space map object %llu:\n",
Get rid of space_map_update() for ms_synced_length Initially, metaslabs and space maps used to be the same thing in ZFS. Later, we started differentiating them by referring to the space map as the on-disk state of the metaslab, making the metaslab a higher-level concept that is metadata that deals with space accounting. Today we've managed to split that code furthermore, with the space map being its own on-disk data structure used in areas of ZFS besides metaslabs (e.g. the vdev-wide space maps used for zpool checkpoint or vdev removal features). This patch refactors the space map code to further split the space map code from the metaslab code. It does so by getting rid of the idea that the space map can have a different in-core and on-disk length (sm_length vs smp_length) which is something that is only used for the metaslab code, and other consumers of space maps just have to deal with. Instead, this patch introduces changes that move the old in-core length of the metaslab's space map to the metaslab structure itself (see ms_synced_length field) while making the space map code only care about the actual space map's length on-disk. The result of this is that space map consumers no longer have to deal with syncing two different lengths for the same structure (e.g. space_map_update() goes away) while metaslab specific behavior stays within the metaslab code. Specifically, the ms_synced_length field keeps track of the amount of data metaslab_load() can read from the metaslab's space map while working concurrently with metaslab_sync() that may be appending to that same space map. As a side note, the patch also adds a few comments around the metaslab code documenting some assumptions and expected behavior. Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8328
2019-02-12 18:38:11 +00:00
(longlong_t)sm->sm_object);
(void) printf(" smp_length = 0x%llx\n",
(longlong_t)sm->sm_phys->smp_length);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
(void) printf(" smp_alloc = 0x%llx\n",
(longlong_t)sm->sm_phys->smp_alloc);
if (dump_opt['d'] < 6 && dump_opt['m'] < 4)
return;
2008-11-20 20:01:55 +00:00
/*
* Print out the freelist entries in both encoded and decoded form.
*/
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
uint8_t mapshift = sm->sm_shift;
int64_t alloc = 0;
uint64_t word, entry_id = 0;
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
for (uint64_t offset = 0; offset < space_map_length(sm);
offset += sizeof (word)) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
VERIFY0(dmu_read(os, space_map_object(sm), offset,
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
sizeof (word), &word, DMU_READ_PREFETCH));
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
if (sm_entry_is_debug(word)) {
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
uint64_t de_txg = SM_DEBUG_TXG_DECODE(word);
uint64_t de_sync_pass = SM_DEBUG_SYNCPASS_DECODE(word);
if (de_txg == 0) {
(void) printf(
"\t [%6llu] PADDING\n",
(u_longlong_t)entry_id);
} else {
(void) printf(
"\t [%6llu] %s: txg %llu pass %llu\n",
(u_longlong_t)entry_id,
ddata[SM_DEBUG_ACTION_DECODE(word)],
(u_longlong_t)de_txg,
(u_longlong_t)de_sync_pass);
}
entry_id++;
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
continue;
}
uint8_t words;
char entry_type;
uint64_t entry_off, entry_run, entry_vdev = SM_NO_VDEVID;
if (sm_entry_is_single_word(word)) {
entry_type = (SM_TYPE_DECODE(word) == SM_ALLOC) ?
'A' : 'F';
entry_off = (SM_OFFSET_DECODE(word) << mapshift) +
sm->sm_start;
entry_run = SM_RUN_DECODE(word) << mapshift;
words = 1;
2008-11-20 20:01:55 +00:00
} else {
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
/* it is a two-word entry so we read another word */
ASSERT(sm_entry_is_double_word(word));
uint64_t extra_word;
offset += sizeof (extra_word);
VERIFY0(dmu_read(os, space_map_object(sm), offset,
sizeof (extra_word), &extra_word,
DMU_READ_PREFETCH));
ASSERT3U(offset, <=, space_map_length(sm));
entry_run = SM2_RUN_DECODE(word) << mapshift;
entry_vdev = SM2_VDEV_DECODE(word);
entry_type = (SM2_TYPE_DECODE(extra_word) == SM_ALLOC) ?
'A' : 'F';
entry_off = (SM2_OFFSET_DECODE(extra_word) <<
mapshift) + sm->sm_start;
words = 2;
2008-11-20 20:01:55 +00:00
}
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
(void) printf("\t [%6llu] %c range:"
" %010llx-%010llx size: %06llx vdev: %06llu words: %u\n",
(u_longlong_t)entry_id,
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
entry_type, (u_longlong_t)entry_off,
(u_longlong_t)(entry_off + entry_run),
(u_longlong_t)entry_run,
(u_longlong_t)entry_vdev, words);
if (entry_type == 'A')
alloc += entry_run;
else
alloc -= entry_run;
entry_id++;
2008-11-20 20:01:55 +00:00
}
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
if (alloc != space_map_allocated(sm)) {
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
(void) printf("space_map_object alloc (%lld) INCONSISTENT "
"with space map summary (%lld)\n",
(longlong_t)space_map_allocated(sm), (longlong_t)alloc);
2008-11-20 20:01:55 +00:00
}
}
2009-07-02 22:44:48 +00:00
static void
dump_metaslab_stats(metaslab_t *msp)
{
char maxbuf[32];
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
range_tree_t *rt = msp->ms_allocatable;
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 17:36:03 +00:00
zfs_btree_t *t = &msp->ms_allocatable_by_size;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
int free_pct = range_tree_space(rt) * 100 / msp->ms_size;
2009-07-02 22:44:48 +00:00
/* max sure nicenum has enough space */
CTASSERT(sizeof (maxbuf) >= NN_NUMBUF_SZ);
zdb_nicenum(metaslab_largest_allocatable(msp), maxbuf, sizeof (maxbuf));
2009-07-02 22:44:48 +00:00
(void) printf("\t %25s %10lu %7s %6s %4s %4d%%\n",
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 17:36:03 +00:00
"segments", zfs_btree_numnodes(t), "maxsize", maxbuf,
2009-07-02 22:44:48 +00:00
"freepct", free_pct);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
(void) printf("\tIn-memory histogram:\n");
dump_histogram(rt->rt_histogram, RANGE_TREE_HISTOGRAM_SIZE, 0);
2009-07-02 22:44:48 +00:00
}
2008-11-20 20:01:55 +00:00
static void
dump_metaslab(metaslab_t *msp)
{
vdev_t *vd = msp->ms_group->mg_vd;
spa_t *spa = vd->vdev_spa;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
space_map_t *sm = msp->ms_sm;
char freebuf[32];
2008-11-20 20:01:55 +00:00
zdb_nicenum(msp->ms_size - space_map_allocated(sm), freebuf,
sizeof (freebuf));
2008-11-20 20:01:55 +00:00
(void) printf(
"\tmetaslab %6llu offset %12llx spacemap %6llu free %5s\n",
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
(u_longlong_t)msp->ms_id, (u_longlong_t)msp->ms_start,
(u_longlong_t)space_map_object(sm), freebuf);
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (dump_opt['m'] > 2 && !dump_opt['L']) {
2009-07-02 22:44:48 +00:00
mutex_enter(&msp->ms_lock);
VERIFY0(metaslab_load(msp));
range_tree_stat_verify(msp->ms_allocatable);
2009-07-02 22:44:48 +00:00
dump_metaslab_stats(msp);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_unload(msp);
2009-07-02 22:44:48 +00:00
mutex_exit(&msp->ms_lock);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (dump_opt['m'] > 1 && sm != NULL &&
spa_feature_is_active(spa, SPA_FEATURE_SPACEMAP_HISTOGRAM)) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* The space map histogram represents free space in chunks
* of sm_shift (i.e. bucket 0 refers to 2^sm_shift).
*/
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
(void) printf("\tOn-disk histogram:\t\tfragmentation %llu\n",
(u_longlong_t)msp->ms_fragmentation);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
dump_histogram(sm->sm_phys->smp_histogram,
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
SPACE_MAP_HISTOGRAM_SIZE, sm->sm_shift);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-13 21:51:51 +00:00
if (vd->vdev_ops == &vdev_draid_ops)
ASSERT3U(msp->ms_size, <=, 1ULL << vd->vdev_ms_shift);
else
ASSERT3U(msp->ms_size, ==, 1ULL << vd->vdev_ms_shift);
dump_spacemap(spa->spa_meta_objset, msp->ms_sm);
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
if (spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP)) {
(void) printf("\tFlush data:\n\tunflushed txg=%llu\n\n",
(u_longlong_t)metaslab_unflushed_txg(msp));
}
}
2008-11-20 20:01:55 +00:00
static void
print_vdev_metaslab_header(vdev_t *vd)
{
vdev_alloc_bias_t alloc_bias = vd->vdev_alloc_bias;
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
const char *bias_str = "";
if (alloc_bias == VDEV_BIAS_LOG || vd->vdev_islog) {
bias_str = VDEV_ALLOC_BIAS_LOG;
} else if (alloc_bias == VDEV_BIAS_SPECIAL) {
bias_str = VDEV_ALLOC_BIAS_SPECIAL;
} else if (alloc_bias == VDEV_BIAS_DEDUP) {
bias_str = VDEV_ALLOC_BIAS_DEDUP;
}
uint64_t ms_flush_data_obj = 0;
if (vd->vdev_top_zap != 0) {
int error = zap_lookup(spa_meta_objset(vd->vdev_spa),
vd->vdev_top_zap, VDEV_TOP_ZAP_MS_UNFLUSHED_PHYS_TXGS,
sizeof (uint64_t), 1, &ms_flush_data_obj);
if (error != ENOENT) {
ASSERT0(error);
}
}
(void) printf("\tvdev %10llu %s",
(u_longlong_t)vd->vdev_id, bias_str);
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
if (ms_flush_data_obj != 0) {
(void) printf(" ms_unflushed_phys object %llu",
(u_longlong_t)ms_flush_data_obj);
}
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
(void) printf("\n\t%-10s%5llu %-19s %-15s %-12s\n",
"metaslabs", (u_longlong_t)vd->vdev_ms_count,
"offset", "spacemap", "free");
(void) printf("\t%15s %19s %15s %12s\n",
"---------------", "-------------------",
"---------------", "------------");
2008-11-20 20:01:55 +00:00
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
static void
dump_metaslab_groups(spa_t *spa)
{
vdev_t *rvd = spa->spa_root_vdev;
metaslab_class_t *mc = spa_normal_class(spa);
uint64_t fragmentation;
metaslab_class_histogram_verify(mc);
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
for (unsigned c = 0; c < rvd->vdev_children; c++) {
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
vdev_t *tvd = rvd->vdev_child[c];
metaslab_group_t *mg = tvd->vdev_mg;
if (mg == NULL || mg->mg_class != mc)
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
continue;
metaslab_group_histogram_verify(mg);
mg->mg_fragmentation = metaslab_group_fragmentation(mg);
(void) printf("\tvdev %10llu\t\tmetaslabs%5llu\t\t"
"fragmentation",
(u_longlong_t)tvd->vdev_id,
(u_longlong_t)tvd->vdev_ms_count);
if (mg->mg_fragmentation == ZFS_FRAG_INVALID) {
(void) printf("%3s\n", "-");
} else {
(void) printf("%3llu%%\n",
(u_longlong_t)mg->mg_fragmentation);
}
dump_histogram(mg->mg_histogram, RANGE_TREE_HISTOGRAM_SIZE, 0);
}
(void) printf("\tpool %s\tfragmentation", spa_name(spa));
fragmentation = metaslab_class_fragmentation(mc);
if (fragmentation == ZFS_FRAG_INVALID)
(void) printf("\t%3s\n", "-");
else
(void) printf("\t%3llu%%\n", (u_longlong_t)fragmentation);
dump_histogram(mc->mc_histogram, RANGE_TREE_HISTOGRAM_SIZE, 0);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
static void
print_vdev_indirect(vdev_t *vd)
{
vdev_indirect_config_t *vic = &vd->vdev_indirect_config;
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
vdev_indirect_births_t *vib = vd->vdev_indirect_births;
if (vim == NULL) {
ASSERT3P(vib, ==, NULL);
return;
}
ASSERT3U(vdev_indirect_mapping_object(vim), ==,
vic->vic_mapping_object);
ASSERT3U(vdev_indirect_births_object(vib), ==,
vic->vic_births_object);
(void) printf("indirect births obj %llu:\n",
(longlong_t)vic->vic_births_object);
(void) printf(" vib_count = %llu\n",
(longlong_t)vdev_indirect_births_count(vib));
for (uint64_t i = 0; i < vdev_indirect_births_count(vib); i++) {
vdev_indirect_birth_entry_phys_t *cur_vibe =
&vib->vib_entries[i];
(void) printf("\toffset %llx -> txg %llu\n",
(longlong_t)cur_vibe->vibe_offset,
(longlong_t)cur_vibe->vibe_phys_birth_txg);
}
(void) printf("\n");
(void) printf("indirect mapping obj %llu:\n",
(longlong_t)vic->vic_mapping_object);
(void) printf(" vim_max_offset = 0x%llx\n",
(longlong_t)vdev_indirect_mapping_max_offset(vim));
(void) printf(" vim_bytes_mapped = 0x%llx\n",
(longlong_t)vdev_indirect_mapping_bytes_mapped(vim));
(void) printf(" vim_count = %llu\n",
(longlong_t)vdev_indirect_mapping_num_entries(vim));
if (dump_opt['d'] <= 5 && dump_opt['m'] <= 3)
return;
uint32_t *counts = vdev_indirect_mapping_load_obsolete_counts(vim);
for (uint64_t i = 0; i < vdev_indirect_mapping_num_entries(vim); i++) {
vdev_indirect_mapping_entry_phys_t *vimep =
&vim->vim_entries[i];
(void) printf("\t<%llx:%llx:%llx> -> "
"<%llx:%llx:%llx> (%x obsolete)\n",
(longlong_t)vd->vdev_id,
(longlong_t)DVA_MAPPING_GET_SRC_OFFSET(vimep),
(longlong_t)DVA_GET_ASIZE(&vimep->vimep_dst),
(longlong_t)DVA_GET_VDEV(&vimep->vimep_dst),
(longlong_t)DVA_GET_OFFSET(&vimep->vimep_dst),
(longlong_t)DVA_GET_ASIZE(&vimep->vimep_dst),
counts[i]);
}
(void) printf("\n");
uint64_t obsolete_sm_object;
VERIFY0(vdev_obsolete_sm_object(vd, &obsolete_sm_object));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
if (obsolete_sm_object != 0) {
objset_t *mos = vd->vdev_spa->spa_meta_objset;
(void) printf("obsolete space map object %llu:\n",
(u_longlong_t)obsolete_sm_object);
ASSERT(vd->vdev_obsolete_sm != NULL);
ASSERT3U(space_map_object(vd->vdev_obsolete_sm), ==,
obsolete_sm_object);
dump_spacemap(mos, vd->vdev_obsolete_sm);
(void) printf("\n");
}
}
2008-11-20 20:01:55 +00:00
static void
dump_metaslabs(spa_t *spa)
{
vdev_t *vd, *rvd = spa->spa_root_vdev;
uint64_t m, c = 0, children = rvd->vdev_children;
2008-11-20 20:01:55 +00:00
(void) printf("\nMetaslabs:\n");
2020-01-24 19:00:46 +00:00
if (!dump_opt['d'] && zopt_metaslab_args > 0) {
c = zopt_metaslab[0];
if (c >= children)
(void) fatal("bad vdev id: %llu", (u_longlong_t)c);
2008-11-20 20:01:55 +00:00
2020-01-24 19:00:46 +00:00
if (zopt_metaslab_args > 1) {
vd = rvd->vdev_child[c];
print_vdev_metaslab_header(vd);
2020-01-24 19:00:46 +00:00
for (m = 1; m < zopt_metaslab_args; m++) {
if (zopt_metaslab[m] < vd->vdev_ms_count)
dump_metaslab(
2020-01-24 19:00:46 +00:00
vd->vdev_ms[zopt_metaslab[m]]);
else
(void) fprintf(stderr, "bad metaslab "
"number %llu\n",
2020-01-24 19:00:46 +00:00
(u_longlong_t)zopt_metaslab[m]);
}
(void) printf("\n");
return;
}
children = c + 1;
}
for (; c < children; c++) {
vd = rvd->vdev_child[c];
print_vdev_metaslab_header(vd);
2008-11-20 20:01:55 +00:00
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
print_vdev_indirect(vd);
2008-11-20 20:01:55 +00:00
for (m = 0; m < vd->vdev_ms_count; m++)
dump_metaslab(vd->vdev_ms[m]);
(void) printf("\n");
}
}
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
static void
dump_log_spacemaps(spa_t *spa)
{
if (!spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP))
return;
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
(void) printf("\nLog Space Maps in Pool:\n");
for (spa_log_sm_t *sls = avl_first(&spa->spa_sm_logs_by_txg);
sls; sls = AVL_NEXT(&spa->spa_sm_logs_by_txg, sls)) {
space_map_t *sm = NULL;
VERIFY0(space_map_open(&sm, spa_meta_objset(spa),
sls->sls_sm_obj, 0, UINT64_MAX, SPA_MINBLOCKSHIFT));
(void) printf("Log Spacemap object %llu txg %llu\n",
(u_longlong_t)sls->sls_sm_obj, (u_longlong_t)sls->sls_txg);
dump_spacemap(spa->spa_meta_objset, sm);
space_map_close(sm);
}
(void) printf("\n");
}
static void
dump_dde(const ddt_t *ddt, const ddt_entry_t *dde, uint64_t index)
{
const ddt_phys_t *ddp = dde->dde_phys;
const ddt_key_t *ddk = &dde->dde_key;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
const char *types[4] = { "ditto", "single", "double", "triple" };
char blkbuf[BP_SPRINTF_LEN];
blkptr_t blk;
int p;
for (p = 0; p < DDT_PHYS_TYPES; p++, ddp++) {
if (ddp->ddp_phys_birth == 0)
continue;
ddt_bp_create(ddt->ddt_checksum, ddk, ddp, &blk);
snprintf_blkptr(blkbuf, sizeof (blkbuf), &blk);
(void) printf("index %llx refcnt %llu %s %s\n",
(u_longlong_t)index, (u_longlong_t)ddp->ddp_refcnt,
types[p], blkbuf);
}
}
static void
dump_dedup_ratio(const ddt_stat_t *dds)
{
double rL, rP, rD, D, dedup, compress, copies;
if (dds->dds_blocks == 0)
return;
rL = (double)dds->dds_ref_lsize;
rP = (double)dds->dds_ref_psize;
rD = (double)dds->dds_ref_dsize;
D = (double)dds->dds_dsize;
dedup = rD / D;
compress = rL / rP;
copies = rD / rP;
(void) printf("dedup = %.2f, compress = %.2f, copies = %.2f, "
"dedup * compress / copies = %.2f\n\n",
dedup, compress, copies, dedup * compress / copies);
}
static void
dump_ddt(ddt_t *ddt, enum ddt_type type, enum ddt_class class)
{
char name[DDT_NAMELEN];
ddt_entry_t dde;
uint64_t walk = 0;
dmu_object_info_t doi;
uint64_t count, dspace, mspace;
int error;
error = ddt_object_info(ddt, type, class, &doi);
if (error == ENOENT)
return;
ASSERT(error == 0);
error = ddt_object_count(ddt, type, class, &count);
ASSERT(error == 0);
if (count == 0)
return;
dspace = doi.doi_physical_blocks_512 << 9;
mspace = doi.doi_fill_count * doi.doi_data_block_size;
ddt_object_name(ddt, type, class, name);
(void) printf("%s: %llu entries, size %llu on disk, %llu in core\n",
name,
(u_longlong_t)count,
(u_longlong_t)(dspace / count),
(u_longlong_t)(mspace / count));
if (dump_opt['D'] < 3)
return;
zpool_dump_ddt(NULL, &ddt->ddt_histogram[type][class]);
if (dump_opt['D'] < 4)
return;
if (dump_opt['D'] < 5 && class == DDT_CLASS_UNIQUE)
return;
(void) printf("%s contents:\n\n", name);
while ((error = ddt_object_walk(ddt, type, class, &walk, &dde)) == 0)
dump_dde(ddt, &dde, walk);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
ASSERT3U(error, ==, ENOENT);
(void) printf("\n");
}
static void
dump_all_ddts(spa_t *spa)
{
ddt_histogram_t ddh_total;
ddt_stat_t dds_total;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
bzero(&ddh_total, sizeof (ddh_total));
bzero(&dds_total, sizeof (dds_total));
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
for (enum zio_checksum c = 0; c < ZIO_CHECKSUM_FUNCTIONS; c++) {
ddt_t *ddt = spa->spa_ddt[c];
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
for (enum ddt_type type = 0; type < DDT_TYPES; type++) {
for (enum ddt_class class = 0; class < DDT_CLASSES;
class++) {
dump_ddt(ddt, type, class);
}
}
}
ddt_get_dedup_stats(spa, &dds_total);
if (dds_total.dds_blocks == 0) {
(void) printf("All DDTs are empty\n");
return;
}
(void) printf("\n");
if (dump_opt['D'] > 1) {
(void) printf("DDT histogram (aggregated over all DDTs):\n");
ddt_get_dedup_histogram(spa, &ddh_total);
zpool_dump_ddt(&dds_total, &ddh_total);
}
dump_dedup_ratio(&dds_total);
}
2009-01-15 21:59:39 +00:00
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
dump_dtl_seg(void *arg, uint64_t start, uint64_t size)
2009-01-15 21:59:39 +00:00
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
char *prefix = arg;
2009-01-15 21:59:39 +00:00
(void) printf("%s [%llu,%llu) length %llu\n",
prefix,
(u_longlong_t)start,
(u_longlong_t)(start + size),
(u_longlong_t)(size));
}
2008-11-20 20:01:55 +00:00
static void
dump_dtl(vdev_t *vd, int indent)
{
2009-01-15 21:59:39 +00:00
spa_t *spa = vd->vdev_spa;
boolean_t required;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
const char *name[DTL_TYPES] = { "missing", "partial", "scrub",
"outage" };
2009-01-15 21:59:39 +00:00
char prefix[256];
spa_vdev_state_enter(spa, SCL_NONE);
2009-01-15 21:59:39 +00:00
required = vdev_dtl_required(vd);
(void) spa_vdev_state_exit(spa, NULL, 0);
2008-11-20 20:01:55 +00:00
if (indent == 0)
(void) printf("\nDirty time logs:\n\n");
2009-01-15 21:59:39 +00:00
(void) printf("\t%*s%s [%s]\n", indent, "",
vd->vdev_path ? vd->vdev_path :
2009-01-15 21:59:39 +00:00
vd->vdev_parent ? vd->vdev_ops->vdev_op_type : spa_name(spa),
required ? "DTL-required" : "DTL-expendable");
2008-11-20 20:01:55 +00:00
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
for (int t = 0; t < DTL_TYPES; t++) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_t *rt = vd->vdev_dtl[t];
if (range_tree_space(rt) == 0)
2009-01-15 21:59:39 +00:00
continue;
(void) snprintf(prefix, sizeof (prefix), "\t%*s%s",
indent + 2, "", name[t]);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_walk(rt, dump_dtl_seg, prefix);
2009-01-15 21:59:39 +00:00
if (dump_opt['d'] > 5 && vd->vdev_children == 0)
dump_spacemap(spa->spa_meta_objset,
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
vd->vdev_dtl_sm);
2008-11-20 20:01:55 +00:00
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
for (unsigned c = 0; c < vd->vdev_children; c++)
2008-11-20 20:01:55 +00:00
dump_dtl(vd->vdev_child[c], indent + 4);
}
static void
dump_history(spa_t *spa)
{
nvlist_t **events = NULL;
char *buf;
uint64_t resid, len, off = 0;
uint_t num = 0;
int error;
time_t tsec;
struct tm t;
char tbuf[30];
char internalstr[MAXPATHLEN];
if ((buf = malloc(SPA_OLD_MAXBLOCKSIZE)) == NULL) {
(void) fprintf(stderr, "%s: unable to allocate I/O buffer\n",
__func__);
return;
}
do {
len = SPA_OLD_MAXBLOCKSIZE;
if ((error = spa_history_get(spa, &off, &len, buf)) != 0) {
(void) fprintf(stderr, "Unable to read history: "
"error %d\n", error);
free(buf);
return;
}
if (zpool_history_unpack(buf, len, &resid, &events, &num) != 0)
break;
off -= resid;
} while (len != 0);
(void) printf("\nHistory:\n");
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
for (unsigned i = 0; i < num; i++) {
uint64_t time, txg, ievent;
char *cmd, *intstr;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
boolean_t printed = B_FALSE;
if (nvlist_lookup_uint64(events[i], ZPOOL_HIST_TIME,
&time) != 0)
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
goto next;
if (nvlist_lookup_string(events[i], ZPOOL_HIST_CMD,
&cmd) != 0) {
if (nvlist_lookup_uint64(events[i],
ZPOOL_HIST_INT_EVENT, &ievent) != 0)
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
goto next;
verify(nvlist_lookup_uint64(events[i],
ZPOOL_HIST_TXG, &txg) == 0);
verify(nvlist_lookup_string(events[i],
ZPOOL_HIST_INT_STR, &intstr) == 0);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
if (ievent >= ZFS_NUM_LEGACY_HISTORY_EVENTS)
goto next;
(void) snprintf(internalstr,
sizeof (internalstr),
"[internal %s txg:%lld] %s",
zfs_history_event_names[ievent],
(longlong_t)txg, intstr);
cmd = internalstr;
}
tsec = time;
(void) localtime_r(&tsec, &t);
(void) strftime(tbuf, sizeof (tbuf), "%F.%T", &t);
(void) printf("%s %s\n", tbuf, cmd);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
printed = B_TRUE;
next:
if (dump_opt['h'] > 1) {
if (!printed)
(void) printf("unrecognized record:\n");
dump_nvlist(events[i], 2);
}
}
free(buf);
}
2008-11-20 20:01:55 +00:00
/*ARGSUSED*/
static void
dump_dnode(objset_t *os, uint64_t object, void *data, size_t size)
{
}
static uint64_t
blkid2offset(const dnode_phys_t *dnp, const blkptr_t *bp,
const zbookmark_phys_t *zb)
2008-11-20 20:01:55 +00:00
{
if (dnp == NULL) {
ASSERT(zb->zb_level < 0);
if (zb->zb_object == 0)
return (zb->zb_blkid);
return (zb->zb_blkid * BP_GET_LSIZE(bp));
}
ASSERT(zb->zb_level >= 0);
2008-11-20 20:01:55 +00:00
return ((zb->zb_blkid <<
(zb->zb_level * (dnp->dn_indblkshift - SPA_BLKPTRSHIFT))) *
2008-11-20 20:01:55 +00:00
dnp->dn_datablkszsec << SPA_MINBLOCKSHIFT);
}
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
static void
snprintf_zstd_header(spa_t *spa, char *blkbuf, size_t buflen,
const blkptr_t *bp)
{
abd_t *pabd;
void *buf;
zio_t *zio;
zfs_zstdhdr_t zstd_hdr;
int error;
if (BP_GET_COMPRESS(bp) != ZIO_COMPRESS_ZSTD)
return;
if (BP_IS_HOLE(bp))
return;
if (BP_IS_EMBEDDED(bp)) {
buf = malloc(SPA_MAXBLOCKSIZE);
if (buf == NULL) {
(void) fprintf(stderr, "out of memory\n");
exit(1);
}
decode_embedded_bp_compressed(bp, buf);
memcpy(&zstd_hdr, buf, sizeof (zstd_hdr));
free(buf);
zstd_hdr.c_len = BE_32(zstd_hdr.c_len);
zstd_hdr.raw_version_level = BE_32(zstd_hdr.raw_version_level);
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf),
" ZSTD:size=%u:version=%u:level=%u:EMBEDDED",
zstd_hdr.c_len, zfs_get_hdrversion(&zstd_hdr),
zfs_get_hdrlevel(&zstd_hdr));
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
return;
}
pabd = abd_alloc_for_io(SPA_MAXBLOCKSIZE, B_FALSE);
zio = zio_root(spa, NULL, NULL, 0);
/* Decrypt but don't decompress so we can read the compression header */
zio_nowait(zio_read(zio, spa, bp, pabd, BP_GET_PSIZE(bp), NULL, NULL,
ZIO_PRIORITY_SYNC_READ, ZIO_FLAG_CANFAIL | ZIO_FLAG_RAW_COMPRESS,
NULL));
error = zio_wait(zio);
if (error) {
(void) fprintf(stderr, "read failed: %d\n", error);
return;
}
buf = abd_borrow_buf_copy(pabd, BP_GET_LSIZE(bp));
memcpy(&zstd_hdr, buf, sizeof (zstd_hdr));
zstd_hdr.c_len = BE_32(zstd_hdr.c_len);
zstd_hdr.raw_version_level = BE_32(zstd_hdr.raw_version_level);
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf),
" ZSTD:size=%u:version=%u:level=%u:NORMAL",
zstd_hdr.c_len, zfs_get_hdrversion(&zstd_hdr),
zfs_get_hdrlevel(&zstd_hdr));
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
abd_return_buf_copy(pabd, buf, BP_GET_LSIZE(bp));
}
2008-11-20 20:01:55 +00:00
static void
snprintf_blkptr_compact(char *blkbuf, size_t buflen, const blkptr_t *bp,
boolean_t bp_freed)
2008-11-20 20:01:55 +00:00
{
const dva_t *dva = bp->blk_dva;
int ndvas = dump_opt['d'] > 5 ? BP_GET_NDVAS(bp) : 1;
int i;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
if (dump_opt['b'] >= 6) {
snprintf_blkptr(blkbuf, buflen, bp);
if (bp_freed) {
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf), " %s", "FREE");
}
return;
}
2008-11-20 20:01:55 +00:00
if (BP_IS_EMBEDDED(bp)) {
(void) sprintf(blkbuf,
"EMBEDDED et=%u %llxL/%llxP B=%llu",
(int)BPE_GET_ETYPE(bp),
(u_longlong_t)BPE_GET_LSIZE(bp),
(u_longlong_t)BPE_GET_PSIZE(bp),
(u_longlong_t)bp->blk_birth);
return;
}
2008-11-20 20:01:55 +00:00
blkbuf[0] = '\0';
for (i = 0; i < ndvas; i++)
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf), "%llu:%llx:%llx ",
2008-11-20 20:01:55 +00:00
(u_longlong_t)DVA_GET_VDEV(&dva[i]),
(u_longlong_t)DVA_GET_OFFSET(&dva[i]),
(u_longlong_t)DVA_GET_ASIZE(&dva[i]));
if (BP_IS_HOLE(bp)) {
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf),
"%llxL B=%llu",
(u_longlong_t)BP_GET_LSIZE(bp),
(u_longlong_t)bp->blk_birth);
} else {
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf),
"%llxL/%llxP F=%llu B=%llu/%llu",
(u_longlong_t)BP_GET_LSIZE(bp),
(u_longlong_t)BP_GET_PSIZE(bp),
(u_longlong_t)BP_GET_FILL(bp),
(u_longlong_t)bp->blk_birth,
(u_longlong_t)BP_PHYSICAL_BIRTH(bp));
if (bp_freed)
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf), " %s", "FREE");
zdb: print block checksums with 6 d's of verbosity Include checksums in the output of 'zdb -dddddd' along with other indirect block information already displayed. Example output follows (with long lines trimmed): $ zdb -dddddd tank/fish 128 Dataset tank/fish [ZPL], ID 259, cr_txg 10, 16.2M, 93 objects, rootbp DV Object lvl iblk dblk dsize dnsize lsize %full type 128 2 128K 128K 634K 512 1M 100.00 ZFS plain f 168 bonus System attri dnode flags: USED_BYTES USERUSED_ACCOUNTED USEROBJUSED_ACCOUNTED dnode maxblkid: 7 path /c uid 0 gid 0 atime Sat Dec 21 10:49:26 2019 mtime Sat Dec 21 10:49:26 2019 ctime Sat Dec 21 10:49:26 2019 crtime Sat Dec 21 10:49:26 2019 gen 41 mode 100755 size 964592 parent 34 links 1 pflags 40800000104 Indirect blocks: 0 L1 0:2c0000:400 0:c021e00:400 20000L/400P F=8 B=41/41 0 L0 0:227800:13800 20000L/13800P F=1 B=41/41 cksum=167a 20000 L0 0:25ec00:17c00 20000L/17c00P F=1 B=41/41 cksum=2312 40000 L0 0:276800:18400 20000L/18400P F=1 B=41/41 cksum=24e0 60000 L0 0:2a7800:18800 20000L/18800P F=1 B=41/41 cksum=25be 80000 L0 0:28ec00:18c00 20000L/18c00P F=1 B=41/41 cksum=2579 a0000 L0 0:24d000:11c00 20000L/11c00P F=1 B=41/41 cksum=140a c0000 L0 0:23b000:12000 20000L/12000P F=1 B=41/41 cksum=164e e0000 L0 0:221e00:5a00 20000L/5a00P F=1 B=41/41 cksum=9de790 segment [0000000000000000, 0000000000100000) size 1M Reviewed-by: Kjeld Schouten <kjeld@schouten-lebbing.nl> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #9765
2019-12-30 17:14:40 +00:00
(void) snprintf(blkbuf + strlen(blkbuf),
buflen - strlen(blkbuf), " cksum=%llx:%llx:%llx:%llx",
(u_longlong_t)bp->blk_cksum.zc_word[0],
(u_longlong_t)bp->blk_cksum.zc_word[1],
(u_longlong_t)bp->blk_cksum.zc_word[2],
(u_longlong_t)bp->blk_cksum.zc_word[3]);
}
2008-11-20 20:01:55 +00:00
}
static void
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
print_indirect(spa_t *spa, blkptr_t *bp, const zbookmark_phys_t *zb,
const dnode_phys_t *dnp)
2008-11-20 20:01:55 +00:00
{
char blkbuf[BP_SPRINTF_LEN];
2008-11-20 20:01:55 +00:00
int l;
if (!BP_IS_EMBEDDED(bp)) {
ASSERT3U(BP_GET_TYPE(bp), ==, dnp->dn_type);
ASSERT3U(BP_GET_LEVEL(bp), ==, zb->zb_level);
}
2008-11-20 20:01:55 +00:00
(void) printf("%16llx ", (u_longlong_t)blkid2offset(dnp, bp, zb));
2008-11-20 20:01:55 +00:00
ASSERT(zb->zb_level >= 0);
for (l = dnp->dn_nlevels - 1; l >= -1; l--) {
if (l == zb->zb_level) {
(void) printf("L%llx", (u_longlong_t)zb->zb_level);
2008-11-20 20:01:55 +00:00
} else {
(void) printf(" ");
2008-11-20 20:01:55 +00:00
}
}
snprintf_blkptr_compact(blkbuf, sizeof (blkbuf), bp, B_FALSE);
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
if (dump_opt['Z'] && BP_GET_COMPRESS(bp) == ZIO_COMPRESS_ZSTD)
snprintf_zstd_header(spa, blkbuf, sizeof (blkbuf), bp);
(void) printf("%s\n", blkbuf);
}
static int
visit_indirect(spa_t *spa, const dnode_phys_t *dnp,
blkptr_t *bp, const zbookmark_phys_t *zb)
{
int err = 0;
if (bp->blk_birth == 0)
return (0);
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
print_indirect(spa, bp, zb, dnp);
if (BP_GET_LEVEL(bp) > 0 && !BP_IS_HOLE(bp)) {
arc_flags_t flags = ARC_FLAG_WAIT;
int i;
blkptr_t *cbp;
int epb = BP_GET_LSIZE(bp) >> SPA_BLKPTRSHIFT;
arc_buf_t *buf;
uint64_t fill = 0;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
ASSERT(!BP_IS_REDACTED(bp));
err = arc_read(NULL, spa, bp, arc_getbuf_func, &buf,
ZIO_PRIORITY_ASYNC_READ, ZIO_FLAG_CANFAIL, &flags, zb);
if (err)
return (err);
ASSERT(buf->b_data);
/* recursively visit blocks below this */
cbp = buf->b_data;
for (i = 0; i < epb; i++, cbp++) {
zbookmark_phys_t czb;
SET_BOOKMARK(&czb, zb->zb_objset, zb->zb_object,
zb->zb_level - 1,
zb->zb_blkid * epb + i);
err = visit_indirect(spa, dnp, cbp, &czb);
if (err)
break;
fill += BP_GET_FILL(cbp);
}
2009-01-15 21:59:39 +00:00
if (!err)
ASSERT3U(fill, ==, BP_GET_FILL(bp));
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 04:04:53 +00:00
arc_buf_destroy(buf, &buf);
2008-11-20 20:01:55 +00:00
}
return (err);
2008-11-20 20:01:55 +00:00
}
/*ARGSUSED*/
static void
dump_indirect(dnode_t *dn)
2008-11-20 20:01:55 +00:00
{
dnode_phys_t *dnp = dn->dn_phys;
int j;
zbookmark_phys_t czb;
2008-11-20 20:01:55 +00:00
(void) printf("Indirect blocks:\n");
SET_BOOKMARK(&czb, dmu_objset_id(dn->dn_objset),
dn->dn_object, dnp->dn_nlevels - 1, 0);
for (j = 0; j < dnp->dn_nblkptr; j++) {
czb.zb_blkid = j;
(void) visit_indirect(dmu_objset_spa(dn->dn_objset), dnp,
&dnp->dn_blkptr[j], &czb);
}
2008-11-20 20:01:55 +00:00
(void) printf("\n");
}
/*ARGSUSED*/
static void
dump_dsl_dir(objset_t *os, uint64_t object, void *data, size_t size)
{
dsl_dir_phys_t *dd = data;
time_t crtime;
char nice[32];
2008-11-20 20:01:55 +00:00
/* make sure nicenum has enough space */
CTASSERT(sizeof (nice) >= NN_NUMBUF_SZ);
2008-11-20 20:01:55 +00:00
if (dd == NULL)
return;
ASSERT3U(size, >=, sizeof (dsl_dir_phys_t));
crtime = dd->dd_creation_time;
(void) printf("\t\tcreation_time = %s", ctime(&crtime));
(void) printf("\t\thead_dataset_obj = %llu\n",
(u_longlong_t)dd->dd_head_dataset_obj);
(void) printf("\t\tparent_dir_obj = %llu\n",
(u_longlong_t)dd->dd_parent_obj);
(void) printf("\t\torigin_obj = %llu\n",
(u_longlong_t)dd->dd_origin_obj);
(void) printf("\t\tchild_dir_zapobj = %llu\n",
(u_longlong_t)dd->dd_child_dir_zapobj);
zdb_nicenum(dd->dd_used_bytes, nice, sizeof (nice));
(void) printf("\t\tused_bytes = %s\n", nice);
zdb_nicenum(dd->dd_compressed_bytes, nice, sizeof (nice));
(void) printf("\t\tcompressed_bytes = %s\n", nice);
zdb_nicenum(dd->dd_uncompressed_bytes, nice, sizeof (nice));
(void) printf("\t\tuncompressed_bytes = %s\n", nice);
zdb_nicenum(dd->dd_quota, nice, sizeof (nice));
(void) printf("\t\tquota = %s\n", nice);
zdb_nicenum(dd->dd_reserved, nice, sizeof (nice));
(void) printf("\t\treserved = %s\n", nice);
2008-11-20 20:01:55 +00:00
(void) printf("\t\tprops_zapobj = %llu\n",
(u_longlong_t)dd->dd_props_zapobj);
(void) printf("\t\tdeleg_zapobj = %llu\n",
(u_longlong_t)dd->dd_deleg_zapobj);
(void) printf("\t\tflags = %llx\n",
(u_longlong_t)dd->dd_flags);
#define DO(which) \
zdb_nicenum(dd->dd_used_breakdown[DD_USED_ ## which], nice, \
sizeof (nice)); \
(void) printf("\t\tused_breakdown[" #which "] = %s\n", nice)
DO(HEAD);
DO(SNAP);
DO(CHILD);
DO(CHILD_RSRV);
DO(REFRSRV);
#undef DO
(void) printf("\t\tclones = %llu\n",
(u_longlong_t)dd->dd_clones);
2008-11-20 20:01:55 +00:00
}
/*ARGSUSED*/
static void
dump_dsl_dataset(objset_t *os, uint64_t object, void *data, size_t size)
{
dsl_dataset_phys_t *ds = data;
time_t crtime;
char used[32], compressed[32], uncompressed[32], unique[32];
2008-11-20 20:01:55 +00:00
char blkbuf[BP_SPRINTF_LEN];
/* make sure nicenum has enough space */
CTASSERT(sizeof (used) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (compressed) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (uncompressed) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (unique) >= NN_NUMBUF_SZ);
2008-11-20 20:01:55 +00:00
if (ds == NULL)
return;
ASSERT(size == sizeof (*ds));
crtime = ds->ds_creation_time;
zdb_nicenum(ds->ds_referenced_bytes, used, sizeof (used));
zdb_nicenum(ds->ds_compressed_bytes, compressed, sizeof (compressed));
zdb_nicenum(ds->ds_uncompressed_bytes, uncompressed,
sizeof (uncompressed));
zdb_nicenum(ds->ds_unique_bytes, unique, sizeof (unique));
snprintf_blkptr(blkbuf, sizeof (blkbuf), &ds->ds_bp);
2008-11-20 20:01:55 +00:00
(void) printf("\t\tdir_obj = %llu\n",
2008-11-20 20:01:55 +00:00
(u_longlong_t)ds->ds_dir_obj);
(void) printf("\t\tprev_snap_obj = %llu\n",
(u_longlong_t)ds->ds_prev_snap_obj);
(void) printf("\t\tprev_snap_txg = %llu\n",
(u_longlong_t)ds->ds_prev_snap_txg);
(void) printf("\t\tnext_snap_obj = %llu\n",
(u_longlong_t)ds->ds_next_snap_obj);
(void) printf("\t\tsnapnames_zapobj = %llu\n",
(u_longlong_t)ds->ds_snapnames_zapobj);
(void) printf("\t\tnum_children = %llu\n",
(u_longlong_t)ds->ds_num_children);
2009-08-18 18:43:27 +00:00
(void) printf("\t\tuserrefs_obj = %llu\n",
(u_longlong_t)ds->ds_userrefs_obj);
2008-11-20 20:01:55 +00:00
(void) printf("\t\tcreation_time = %s", ctime(&crtime));
(void) printf("\t\tcreation_txg = %llu\n",
(u_longlong_t)ds->ds_creation_txg);
(void) printf("\t\tdeadlist_obj = %llu\n",
(u_longlong_t)ds->ds_deadlist_obj);
(void) printf("\t\tused_bytes = %s\n", used);
(void) printf("\t\tcompressed_bytes = %s\n", compressed);
(void) printf("\t\tuncompressed_bytes = %s\n", uncompressed);
(void) printf("\t\tunique = %s\n", unique);
(void) printf("\t\tfsid_guid = %llu\n",
(u_longlong_t)ds->ds_fsid_guid);
(void) printf("\t\tguid = %llu\n",
(u_longlong_t)ds->ds_guid);
(void) printf("\t\tflags = %llx\n",
(u_longlong_t)ds->ds_flags);
(void) printf("\t\tnext_clones_obj = %llu\n",
(u_longlong_t)ds->ds_next_clones_obj);
(void) printf("\t\tprops_obj = %llu\n",
(u_longlong_t)ds->ds_props_obj);
2008-11-20 20:01:55 +00:00
(void) printf("\t\tbp = %s\n", blkbuf);
}
/* ARGSUSED */
static int
dump_bptree_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
char blkbuf[BP_SPRINTF_LEN];
if (bp->blk_birth != 0) {
snprintf_blkptr(blkbuf, sizeof (blkbuf), bp);
(void) printf("\t%s\n", blkbuf);
}
return (0);
}
static void
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
dump_bptree(objset_t *os, uint64_t obj, const char *name)
{
char bytes[32];
bptree_phys_t *bt;
dmu_buf_t *db;
/* make sure nicenum has enough space */
CTASSERT(sizeof (bytes) >= NN_NUMBUF_SZ);
if (dump_opt['d'] < 3)
return;
VERIFY3U(0, ==, dmu_bonus_hold(os, obj, FTAG, &db));
bt = db->db_data;
zdb_nicenum(bt->bt_bytes, bytes, sizeof (bytes));
(void) printf("\n %s: %llu datasets, %s\n",
name, (unsigned long long)(bt->bt_end - bt->bt_begin), bytes);
dmu_buf_rele(db, FTAG);
if (dump_opt['d'] < 5)
return;
(void) printf("\n");
(void) bptree_iterate(os, obj, B_FALSE, dump_bptree_cb, NULL, NULL);
}
/* ARGSUSED */
static int
dump_bpobj_cb(void *arg, const blkptr_t *bp, boolean_t bp_freed, dmu_tx_t *tx)
{
char blkbuf[BP_SPRINTF_LEN];
ASSERT(bp->blk_birth != 0);
snprintf_blkptr_compact(blkbuf, sizeof (blkbuf), bp, bp_freed);
(void) printf("\t%s\n", blkbuf);
return (0);
}
2008-11-20 20:01:55 +00:00
static void
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
dump_full_bpobj(bpobj_t *bpo, const char *name, int indent)
2008-11-20 20:01:55 +00:00
{
char bytes[32];
char comp[32];
char uncomp[32];
uint64_t i;
2008-11-20 20:01:55 +00:00
/* make sure nicenum has enough space */
CTASSERT(sizeof (bytes) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (comp) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (uncomp) >= NN_NUMBUF_SZ);
2008-11-20 20:01:55 +00:00
if (dump_opt['d'] < 3)
return;
zdb_nicenum(bpo->bpo_phys->bpo_bytes, bytes, sizeof (bytes));
if (bpo->bpo_havesubobj && bpo->bpo_phys->bpo_subobjs != 0) {
zdb_nicenum(bpo->bpo_phys->bpo_comp, comp, sizeof (comp));
zdb_nicenum(bpo->bpo_phys->bpo_uncomp, uncomp, sizeof (uncomp));
if (bpo->bpo_havefreed) {
(void) printf(" %*s: object %llu, %llu local "
"blkptrs, %llu freed, %llu subobjs in object %llu, "
"%s (%s/%s comp)\n",
indent * 8, name,
(u_longlong_t)bpo->bpo_object,
(u_longlong_t)bpo->bpo_phys->bpo_num_blkptrs,
(u_longlong_t)bpo->bpo_phys->bpo_num_freed,
(u_longlong_t)bpo->bpo_phys->bpo_num_subobjs,
(u_longlong_t)bpo->bpo_phys->bpo_subobjs,
bytes, comp, uncomp);
} else {
(void) printf(" %*s: object %llu, %llu local "
"blkptrs, %llu subobjs in object %llu, "
"%s (%s/%s comp)\n",
indent * 8, name,
(u_longlong_t)bpo->bpo_object,
(u_longlong_t)bpo->bpo_phys->bpo_num_blkptrs,
(u_longlong_t)bpo->bpo_phys->bpo_num_subobjs,
(u_longlong_t)bpo->bpo_phys->bpo_subobjs,
bytes, comp, uncomp);
}
for (i = 0; i < bpo->bpo_phys->bpo_num_subobjs; i++) {
uint64_t subobj;
bpobj_t subbpo;
int error;
VERIFY0(dmu_read(bpo->bpo_os,
bpo->bpo_phys->bpo_subobjs,
i * sizeof (subobj), sizeof (subobj), &subobj, 0));
error = bpobj_open(&subbpo, bpo->bpo_os, subobj);
if (error != 0) {
(void) printf("ERROR %u while trying to open "
"subobj id %llu\n",
error, (u_longlong_t)subobj);
continue;
}
dump_full_bpobj(&subbpo, "subobj", indent + 1);
bpobj_close(&subbpo);
}
2008-11-20 20:01:55 +00:00
} else {
if (bpo->bpo_havefreed) {
(void) printf(" %*s: object %llu, %llu blkptrs, "
"%llu freed, %s\n",
indent * 8, name,
(u_longlong_t)bpo->bpo_object,
(u_longlong_t)bpo->bpo_phys->bpo_num_blkptrs,
(u_longlong_t)bpo->bpo_phys->bpo_num_freed,
bytes);
} else {
(void) printf(" %*s: object %llu, %llu blkptrs, "
"%s\n",
indent * 8, name,
(u_longlong_t)bpo->bpo_object,
(u_longlong_t)bpo->bpo_phys->bpo_num_blkptrs,
bytes);
}
2008-11-20 20:01:55 +00:00
}
if (dump_opt['d'] < 5)
2008-11-20 20:01:55 +00:00
return;
if (indent == 0) {
(void) bpobj_iterate_nofree(bpo, dump_bpobj_cb, NULL, NULL);
(void) printf("\n");
}
}
2008-11-20 20:01:55 +00:00
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
static int
dump_bookmark(dsl_pool_t *dp, char *name, boolean_t print_redact,
boolean_t print_list)
{
int err = 0;
zfs_bookmark_phys_t prop;
objset_t *mos = dp->dp_spa->spa_meta_objset;
err = dsl_bookmark_lookup(dp, name, NULL, &prop);
if (err != 0) {
return (err);
}
(void) printf("\t#%s: ", strchr(name, '#') + 1);
(void) printf("{guid: %llx creation_txg: %llu creation_time: "
"%llu redaction_obj: %llu}\n", (u_longlong_t)prop.zbm_guid,
(u_longlong_t)prop.zbm_creation_txg,
(u_longlong_t)prop.zbm_creation_time,
(u_longlong_t)prop.zbm_redaction_obj);
IMPLY(print_list, print_redact);
if (!print_redact || prop.zbm_redaction_obj == 0)
return (0);
redaction_list_t *rl;
VERIFY0(dsl_redaction_list_hold_obj(dp,
prop.zbm_redaction_obj, FTAG, &rl));
redaction_list_phys_t *rlp = rl->rl_phys;
(void) printf("\tRedacted:\n\t\tProgress: ");
if (rlp->rlp_last_object != UINT64_MAX ||
rlp->rlp_last_blkid != UINT64_MAX) {
(void) printf("%llu %llu (incomplete)\n",
(u_longlong_t)rlp->rlp_last_object,
(u_longlong_t)rlp->rlp_last_blkid);
} else {
(void) printf("complete\n");
}
(void) printf("\t\tSnapshots: [");
for (unsigned int i = 0; i < rlp->rlp_num_snaps; i++) {
if (i > 0)
(void) printf(", ");
(void) printf("%0llu",
(u_longlong_t)rlp->rlp_snaps[i]);
}
(void) printf("]\n\t\tLength: %llu\n",
(u_longlong_t)rlp->rlp_num_entries);
if (!print_list) {
dsl_redaction_list_rele(rl, FTAG);
return (0);
}
if (rlp->rlp_num_entries == 0) {
dsl_redaction_list_rele(rl, FTAG);
(void) printf("\t\tRedaction List: []\n\n");
return (0);
}
redact_block_phys_t *rbp_buf;
uint64_t size;
dmu_object_info_t doi;
VERIFY0(dmu_object_info(mos, prop.zbm_redaction_obj, &doi));
size = doi.doi_max_offset;
rbp_buf = kmem_alloc(size, KM_SLEEP);
err = dmu_read(mos, prop.zbm_redaction_obj, 0, size,
rbp_buf, 0);
if (err != 0) {
dsl_redaction_list_rele(rl, FTAG);
kmem_free(rbp_buf, size);
return (err);
}
(void) printf("\t\tRedaction List: [{object: %llx, offset: "
"%llx, blksz: %x, count: %llx}",
(u_longlong_t)rbp_buf[0].rbp_object,
(u_longlong_t)rbp_buf[0].rbp_blkid,
(uint_t)(redact_block_get_size(&rbp_buf[0])),
(u_longlong_t)redact_block_get_count(&rbp_buf[0]));
for (size_t i = 1; i < rlp->rlp_num_entries; i++) {
(void) printf(",\n\t\t{object: %llx, offset: %llx, "
"blksz: %x, count: %llx}",
(u_longlong_t)rbp_buf[i].rbp_object,
(u_longlong_t)rbp_buf[i].rbp_blkid,
(uint_t)(redact_block_get_size(&rbp_buf[i])),
(u_longlong_t)redact_block_get_count(&rbp_buf[i]));
}
dsl_redaction_list_rele(rl, FTAG);
kmem_free(rbp_buf, size);
(void) printf("]\n\n");
return (0);
}
static void
dump_bookmarks(objset_t *os, int verbosity)
{
zap_cursor_t zc;
zap_attribute_t attr;
dsl_dataset_t *ds = dmu_objset_ds(os);
dsl_pool_t *dp = spa_get_dsl(os->os_spa);
objset_t *mos = os->os_spa->spa_meta_objset;
if (verbosity < 4)
return;
dsl_pool_config_enter(dp, FTAG);
for (zap_cursor_init(&zc, mos, ds->ds_bookmarks_obj);
zap_cursor_retrieve(&zc, &attr) == 0;
zap_cursor_advance(&zc)) {
char osname[ZFS_MAX_DATASET_NAME_LEN];
char buf[ZFS_MAX_DATASET_NAME_LEN];
dmu_objset_name(os, osname);
VERIFY3S(0, <=, snprintf(buf, sizeof (buf), "%s#%s", osname,
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
attr.za_name));
(void) dump_bookmark(dp, buf, verbosity >= 5, verbosity >= 6);
}
zap_cursor_fini(&zc);
dsl_pool_config_exit(dp, FTAG);
}
static void
bpobj_count_refd(bpobj_t *bpo)
{
mos_obj_refd(bpo->bpo_object);
if (bpo->bpo_havesubobj && bpo->bpo_phys->bpo_subobjs != 0) {
mos_obj_refd(bpo->bpo_phys->bpo_subobjs);
for (uint64_t i = 0; i < bpo->bpo_phys->bpo_num_subobjs; i++) {
uint64_t subobj;
bpobj_t subbpo;
int error;
VERIFY0(dmu_read(bpo->bpo_os,
bpo->bpo_phys->bpo_subobjs,
i * sizeof (subobj), sizeof (subobj), &subobj, 0));
error = bpobj_open(&subbpo, bpo->bpo_os, subobj);
if (error != 0) {
(void) printf("ERROR %u while trying to open "
"subobj id %llu\n",
error, (u_longlong_t)subobj);
continue;
}
bpobj_count_refd(&subbpo);
bpobj_close(&subbpo);
}
}
}
static int
dsl_deadlist_entry_count_refd(void *arg, dsl_deadlist_entry_t *dle)
{
spa_t *spa = arg;
uint64_t empty_bpobj = spa->spa_dsl_pool->dp_empty_bpobj;
if (dle->dle_bpobj.bpo_object != empty_bpobj)
bpobj_count_refd(&dle->dle_bpobj);
return (0);
}
static int
dsl_deadlist_entry_dump(void *arg, dsl_deadlist_entry_t *dle)
{
ASSERT(arg == NULL);
if (dump_opt['d'] >= 5) {
char buf[128];
(void) snprintf(buf, sizeof (buf),
"mintxg %llu -> obj %llu",
(longlong_t)dle->dle_mintxg,
(longlong_t)dle->dle_bpobj.bpo_object);
dump_full_bpobj(&dle->dle_bpobj, buf, 0);
} else {
(void) printf("mintxg %llu -> obj %llu\n",
(longlong_t)dle->dle_mintxg,
(longlong_t)dle->dle_bpobj.bpo_object);
}
return (0);
}
static void
dump_blkptr_list(dsl_deadlist_t *dl, char *name)
{
char bytes[32];
char comp[32];
char uncomp[32];
char entries[32];
spa_t *spa = dmu_objset_spa(dl->dl_os);
uint64_t empty_bpobj = spa->spa_dsl_pool->dp_empty_bpobj;
if (dl->dl_oldfmt) {
if (dl->dl_bpobj.bpo_object != empty_bpobj)
bpobj_count_refd(&dl->dl_bpobj);
} else {
mos_obj_refd(dl->dl_object);
dsl_deadlist_iterate(dl, dsl_deadlist_entry_count_refd, spa);
}
/* make sure nicenum has enough space */
CTASSERT(sizeof (bytes) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (comp) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (uncomp) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (entries) >= NN_NUMBUF_SZ);
if (dump_opt['d'] < 3)
return;
2008-11-20 20:01:55 +00:00
if (dl->dl_oldfmt) {
dump_full_bpobj(&dl->dl_bpobj, "old-format deadlist", 0);
return;
}
zdb_nicenum(dl->dl_phys->dl_used, bytes, sizeof (bytes));
zdb_nicenum(dl->dl_phys->dl_comp, comp, sizeof (comp));
zdb_nicenum(dl->dl_phys->dl_uncomp, uncomp, sizeof (uncomp));
zdb_nicenum(avl_numnodes(&dl->dl_tree), entries, sizeof (entries));
(void) printf("\n %s: %s (%s/%s comp), %s entries\n",
name, bytes, comp, uncomp, entries);
if (dump_opt['d'] < 4)
return;
(void) printf("\n");
dsl_deadlist_iterate(dl, dsl_deadlist_entry_dump, NULL);
}
static int
verify_dd_livelist(objset_t *os)
{
uint64_t ll_used, used, ll_comp, comp, ll_uncomp, uncomp;
dsl_pool_t *dp = spa_get_dsl(os->os_spa);
dsl_dir_t *dd = os->os_dsl_dataset->ds_dir;
ASSERT(!dmu_objset_is_snapshot(os));
if (!dsl_deadlist_is_open(&dd->dd_livelist))
return (0);
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
/* Iterate through the livelist to check for duplicates */
dsl_deadlist_iterate(&dd->dd_livelist, sublivelist_verify_lightweight,
NULL);
dsl_pool_config_enter(dp, FTAG);
dsl_deadlist_space(&dd->dd_livelist, &ll_used,
&ll_comp, &ll_uncomp);
dsl_dataset_t *origin_ds;
ASSERT(dsl_pool_config_held(dp));
VERIFY0(dsl_dataset_hold_obj(dp,
dsl_dir_phys(dd)->dd_origin_obj, FTAG, &origin_ds));
VERIFY0(dsl_dataset_space_written(origin_ds, os->os_dsl_dataset,
&used, &comp, &uncomp));
dsl_dataset_rele(origin_ds, FTAG);
dsl_pool_config_exit(dp, FTAG);
/*
* It's possible that the dataset's uncomp space is larger than the
* livelist's because livelists do not track embedded block pointers
*/
if (used != ll_used || comp != ll_comp || uncomp < ll_uncomp) {
char nice_used[32], nice_comp[32], nice_uncomp[32];
(void) printf("Discrepancy in space accounting:\n");
zdb_nicenum(used, nice_used, sizeof (nice_used));
zdb_nicenum(comp, nice_comp, sizeof (nice_comp));
zdb_nicenum(uncomp, nice_uncomp, sizeof (nice_uncomp));
(void) printf("dir: used %s, comp %s, uncomp %s\n",
nice_used, nice_comp, nice_uncomp);
zdb_nicenum(ll_used, nice_used, sizeof (nice_used));
zdb_nicenum(ll_comp, nice_comp, sizeof (nice_comp));
zdb_nicenum(ll_uncomp, nice_uncomp, sizeof (nice_uncomp));
(void) printf("livelist: used %s, comp %s, uncomp %s\n",
nice_used, nice_comp, nice_uncomp);
return (1);
}
return (0);
2008-11-20 20:01:55 +00:00
}
static avl_tree_t idx_tree;
static avl_tree_t domain_tree;
static boolean_t fuid_table_loaded;
static objset_t *sa_os = NULL;
static sa_attr_type_t *sa_attr_table = NULL;
static int
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
open_objset(const char *path, void *tag, objset_t **osp)
{
int err;
uint64_t sa_attrs = 0;
uint64_t version = 0;
VERIFY3P(sa_os, ==, NULL);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
/*
* We can't own an objset if it's redacted. Therefore, we do this
* dance: hold the objset, then acquire a long hold on its dataset, then
* release the pool (which is held as part of holding the objset).
*/
err = dmu_objset_hold(path, tag, osp);
if (err != 0) {
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
(void) fprintf(stderr, "failed to hold dataset '%s': %s\n",
path, strerror(err));
return (err);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
dsl_dataset_long_hold(dmu_objset_ds(*osp), tag);
dsl_pool_rele(dmu_objset_pool(*osp), tag);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
if (dmu_objset_type(*osp) == DMU_OST_ZFS && !(*osp)->os_encrypted) {
(void) zap_lookup(*osp, MASTER_NODE_OBJ, ZPL_VERSION_STR,
8, 1, &version);
if (version >= ZPL_VERSION_SA) {
(void) zap_lookup(*osp, MASTER_NODE_OBJ, ZFS_SA_ATTRS,
8, 1, &sa_attrs);
}
err = sa_setup(*osp, sa_attrs, zfs_attr_table, ZPL_END,
&sa_attr_table);
if (err != 0) {
(void) fprintf(stderr, "sa_setup failed: %s\n",
strerror(err));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
dsl_dataset_long_rele(dmu_objset_ds(*osp), tag);
dsl_dataset_rele(dmu_objset_ds(*osp), tag);
*osp = NULL;
}
}
sa_os = *osp;
return (0);
}
static void
close_objset(objset_t *os, void *tag)
{
VERIFY3P(os, ==, sa_os);
if (os->os_sa != NULL)
sa_tear_down(os);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
dsl_dataset_long_rele(dmu_objset_ds(os), tag);
dsl_dataset_rele(dmu_objset_ds(os), tag);
sa_attr_table = NULL;
sa_os = NULL;
}
2008-11-20 20:01:55 +00:00
static void
fuid_table_destroy(void)
2008-11-20 20:01:55 +00:00
{
if (fuid_table_loaded) {
zfs_fuid_table_destroy(&idx_tree, &domain_tree);
fuid_table_loaded = B_FALSE;
}
}
/*
* print uid or gid information.
* For normal POSIX id just the id is printed in decimal format.
* For CIFS files with FUID the fuid is printed in hex followed by
* the domain-rid string.
2008-11-20 20:01:55 +00:00
*/
static void
print_idstr(uint64_t id, const char *id_type)
{
if (FUID_INDEX(id)) {
char *domain;
domain = zfs_fuid_idx_domain(&idx_tree, FUID_INDEX(id));
(void) printf("\t%s %llx [%s-%d]\n", id_type,
(u_longlong_t)id, domain, (int)FUID_RID(id));
} else {
(void) printf("\t%s %llu\n", id_type, (u_longlong_t)id);
}
}
static void
dump_uidgid(objset_t *os, uint64_t uid, uint64_t gid)
2008-11-20 20:01:55 +00:00
{
uint32_t uid_idx, gid_idx;
uid_idx = FUID_INDEX(uid);
gid_idx = FUID_INDEX(gid);
2008-11-20 20:01:55 +00:00
/* Load domain table, if not already loaded */
if (!fuid_table_loaded && (uid_idx || gid_idx)) {
uint64_t fuid_obj;
/* first find the fuid object. It lives in the master node */
VERIFY(zap_lookup(os, MASTER_NODE_OBJ, ZFS_FUID_TABLES,
8, 1, &fuid_obj) == 0);
2009-07-02 22:44:48 +00:00
zfs_fuid_avl_tree_create(&idx_tree, &domain_tree);
2008-11-20 20:01:55 +00:00
(void) zfs_fuid_table_load(os, fuid_obj,
&idx_tree, &domain_tree);
fuid_table_loaded = B_TRUE;
}
print_idstr(uid, "uid");
print_idstr(gid, "gid");
2008-11-20 20:01:55 +00:00
}
static void
dump_znode_sa_xattr(sa_handle_t *hdl)
{
nvlist_t *sa_xattr;
nvpair_t *elem = NULL;
int sa_xattr_size = 0;
int sa_xattr_entries = 0;
int error;
char *sa_xattr_packed;
error = sa_size(hdl, sa_attr_table[ZPL_DXATTR], &sa_xattr_size);
if (error || sa_xattr_size == 0)
return;
sa_xattr_packed = malloc(sa_xattr_size);
if (sa_xattr_packed == NULL)
return;
error = sa_lookup(hdl, sa_attr_table[ZPL_DXATTR],
sa_xattr_packed, sa_xattr_size);
if (error) {
free(sa_xattr_packed);
return;
}
error = nvlist_unpack(sa_xattr_packed, sa_xattr_size, &sa_xattr, 0);
if (error) {
free(sa_xattr_packed);
return;
}
while ((elem = nvlist_next_nvpair(sa_xattr, elem)) != NULL)
sa_xattr_entries++;
(void) printf("\tSA xattrs: %d bytes, %d entries\n\n",
sa_xattr_size, sa_xattr_entries);
while ((elem = nvlist_next_nvpair(sa_xattr, elem)) != NULL) {
uchar_t *value;
uint_t cnt, idx;
(void) printf("\t\t%s = ", nvpair_name(elem));
nvpair_value_byte_array(elem, &value, &cnt);
for (idx = 0; idx < cnt; ++idx) {
if (isprint(value[idx]))
(void) putchar(value[idx]);
else
(void) printf("\\%3.3o", value[idx]);
}
(void) putchar('\n');
}
nvlist_free(sa_xattr);
free(sa_xattr_packed);
}
static void
dump_znode_symlink(sa_handle_t *hdl)
{
int sa_symlink_size = 0;
char linktarget[MAXPATHLEN];
linktarget[0] = '\0';
int error;
error = sa_size(hdl, sa_attr_table[ZPL_SYMLINK], &sa_symlink_size);
if (error || sa_symlink_size == 0) {
return;
}
if (sa_lookup(hdl, sa_attr_table[ZPL_SYMLINK],
&linktarget, sa_symlink_size) == 0)
(void) printf("\ttarget %s\n", linktarget);
}
2008-11-20 20:01:55 +00:00
/*ARGSUSED*/
static void
dump_znode(objset_t *os, uint64_t object, void *data, size_t size)
{
char path[MAXPATHLEN * 2]; /* allow for xattr and failure prefix */
sa_handle_t *hdl;
uint64_t xattr, rdev, gen;
uint64_t uid, gid, mode, fsize, parent, links;
uint64_t pflags;
uint64_t acctm[2], modtm[2], chgtm[2], crtm[2];
time_t z_crtime, z_atime, z_mtime, z_ctime;
sa_bulk_attr_t bulk[12];
int idx = 0;
2008-11-20 20:01:55 +00:00
int error;
VERIFY3P(os, ==, sa_os);
if (sa_handle_get(os, object, NULL, SA_HDL_PRIVATE, &hdl)) {
(void) printf("Failed to get handle for SA znode\n");
return;
}
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_UID], NULL, &uid, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_GID], NULL, &gid, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_LINKS], NULL,
&links, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_GEN], NULL, &gen, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_MODE], NULL,
&mode, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_PARENT],
NULL, &parent, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_SIZE], NULL,
&fsize, 8);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_ATIME], NULL,
acctm, 16);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_MTIME], NULL,
modtm, 16);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_CRTIME], NULL,
crtm, 16);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_CTIME], NULL,
chgtm, 16);
SA_ADD_BULK_ATTR(bulk, idx, sa_attr_table[ZPL_FLAGS], NULL,
&pflags, 8);
if (sa_bulk_lookup(hdl, bulk, idx)) {
(void) sa_handle_destroy(hdl);
return;
}
2008-11-20 20:01:55 +00:00
z_crtime = (time_t)crtm[0];
z_atime = (time_t)acctm[0];
z_mtime = (time_t)modtm[0];
z_ctime = (time_t)chgtm[0];
2008-11-20 20:01:55 +00:00
if (dump_opt['d'] > 4) {
error = zfs_obj_to_path(os, object, path, sizeof (path));
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 17:35:20 +00:00
if (error == ESTALE) {
(void) snprintf(path, sizeof (path), "on delete queue");
} else if (error != 0) {
leaked_objects++;
(void) snprintf(path, sizeof (path),
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 17:35:20 +00:00
"path not found, possibly leaked");
}
(void) printf("\tpath %s\n", path);
}
if (S_ISLNK(mode))
dump_znode_symlink(hdl);
dump_uidgid(os, uid, gid);
2008-11-20 20:01:55 +00:00
(void) printf("\tatime %s", ctime(&z_atime));
(void) printf("\tmtime %s", ctime(&z_mtime));
(void) printf("\tctime %s", ctime(&z_ctime));
(void) printf("\tcrtime %s", ctime(&z_crtime));
(void) printf("\tgen %llu\n", (u_longlong_t)gen);
(void) printf("\tmode %llo\n", (u_longlong_t)mode);
(void) printf("\tsize %llu\n", (u_longlong_t)fsize);
(void) printf("\tparent %llu\n", (u_longlong_t)parent);
(void) printf("\tlinks %llu\n", (u_longlong_t)links);
(void) printf("\tpflags %llx\n", (u_longlong_t)pflags);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-13 22:54:54 +00:00
if (dmu_objset_projectquota_enabled(os) && (pflags & ZFS_PROJID)) {
uint64_t projid;
if (sa_lookup(hdl, sa_attr_table[ZPL_PROJID], &projid,
sizeof (uint64_t)) == 0)
(void) printf("\tprojid %llu\n", (u_longlong_t)projid);
}
if (sa_lookup(hdl, sa_attr_table[ZPL_XATTR], &xattr,
sizeof (uint64_t)) == 0)
(void) printf("\txattr %llu\n", (u_longlong_t)xattr);
if (sa_lookup(hdl, sa_attr_table[ZPL_RDEV], &rdev,
sizeof (uint64_t)) == 0)
(void) printf("\trdev 0x%016llx\n", (u_longlong_t)rdev);
dump_znode_sa_xattr(hdl);
sa_handle_destroy(hdl);
2008-11-20 20:01:55 +00:00
}
/*ARGSUSED*/
static void
dump_acl(objset_t *os, uint64_t object, void *data, size_t size)
{
}
/*ARGSUSED*/
static void
dump_dmu_objset(objset_t *os, uint64_t object, void *data, size_t size)
{
}
static object_viewer_t *object_viewer[DMU_OT_NUMTYPES + 1] = {
2008-11-20 20:01:55 +00:00
dump_none, /* unallocated */
dump_zap, /* object directory */
dump_uint64, /* object array */
dump_none, /* packed nvlist */
dump_packed_nvlist, /* packed nvlist size */
dump_none, /* bpobj */
dump_bpobj, /* bpobj header */
2008-11-20 20:01:55 +00:00
dump_none, /* SPA space map header */
dump_none, /* SPA space map */
dump_none, /* ZIL intent log */
dump_dnode, /* DMU dnode */
dump_dmu_objset, /* DMU objset */
dump_dsl_dir, /* DSL directory */
dump_zap, /* DSL directory child map */
dump_zap, /* DSL dataset snap map */
dump_zap, /* DSL props */
dump_dsl_dataset, /* DSL dataset */
dump_znode, /* ZFS znode */
dump_acl, /* ZFS V0 ACL */
dump_uint8, /* ZFS plain file */
dump_zpldir, /* ZFS directory */
dump_zap, /* ZFS master node */
dump_zap, /* ZFS delete queue */
dump_uint8, /* zvol object */
dump_zap, /* zvol prop */
dump_uint8, /* other uint8[] */
dump_uint64, /* other uint64[] */
dump_zap, /* other ZAP */
dump_zap, /* persistent error log */
dump_uint8, /* SPA history */
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
dump_history_offsets, /* SPA history offsets */
2008-11-20 20:01:55 +00:00
dump_zap, /* Pool properties */
dump_zap, /* DSL permissions */
dump_acl, /* ZFS ACL */
dump_uint8, /* ZFS SYSACL */
dump_none, /* FUID nvlist */
dump_packed_nvlist, /* FUID nvlist size */
dump_zap, /* DSL dataset next clones */
dump_zap, /* DSL scrub queue */
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-13 22:54:54 +00:00
dump_zap, /* ZFS user/group/project used */
dump_zap, /* ZFS user/group/project quota */
2009-08-18 18:43:27 +00:00
dump_zap, /* snapshot refcount tags */
dump_ddt_zap, /* DDT ZAP object */
dump_zap, /* DDT statistics */
dump_znode, /* SA object */
dump_zap, /* SA Master Node */
dump_sa_attrs, /* SA attribute registration */
dump_sa_layouts, /* SA attribute layouts */
dump_zap, /* DSL scrub translations */
dump_none, /* fake dedup BP */
dump_zap, /* deadlist */
dump_none, /* deadlist hdr */
dump_zap, /* dsl clones */
dump_bpobj_subobjs, /* bpobj subobjs */
dump_unknown, /* Unknown type, must be last */
2008-11-20 20:01:55 +00:00
};
2020-01-24 19:00:46 +00:00
static boolean_t
match_object_type(dmu_object_type_t obj_type, uint64_t flags)
{
boolean_t match = B_TRUE;
switch (obj_type) {
case DMU_OT_DIRECTORY_CONTENTS:
if (!(flags & ZOR_FLAG_DIRECTORY))
match = B_FALSE;
break;
case DMU_OT_PLAIN_FILE_CONTENTS:
if (!(flags & ZOR_FLAG_PLAIN_FILE))
match = B_FALSE;
break;
case DMU_OT_SPACE_MAP:
if (!(flags & ZOR_FLAG_SPACE_MAP))
match = B_FALSE;
break;
default:
if (strcmp(zdb_ot_name(obj_type), "zap") == 0) {
if (!(flags & ZOR_FLAG_ZAP))
match = B_FALSE;
break;
}
/*
* If all bits except some of the supported flags are
* set, the user combined the all-types flag (A) with
* a negated flag to exclude some types (e.g. A-f to
* show all object types except plain files).
*/
if ((flags | ZOR_SUPPORTED_FLAGS) != ZOR_FLAG_ALL_TYPES)
match = B_FALSE;
break;
}
return (match);
}
2008-11-20 20:01:55 +00:00
static void
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
dump_object(objset_t *os, uint64_t object, int verbosity,
2020-01-24 19:00:46 +00:00
boolean_t *print_header, uint64_t *dnode_slots_used, uint64_t flags)
2008-11-20 20:01:55 +00:00
{
dmu_buf_t *db = NULL;
dmu_object_info_t doi;
dnode_t *dn;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
boolean_t dnode_held = B_FALSE;
2008-11-20 20:01:55 +00:00
void *bonus = NULL;
size_t bsize = 0;
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
char iblk[32], dblk[32], lsize[32], asize[32], fill[32], dnsize[32];
char bonus_size[32];
2008-11-20 20:01:55 +00:00
char aux[50];
int error;
/* make sure nicenum has enough space */
CTASSERT(sizeof (iblk) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (dblk) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (lsize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (asize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (bonus_size) >= NN_NUMBUF_SZ);
2008-11-20 20:01:55 +00:00
if (*print_header) {
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
(void) printf("\n%10s %3s %5s %5s %5s %6s %5s %6s %s\n",
"Object", "lvl", "iblk", "dblk", "dsize", "dnsize",
"lsize", "%full", "type");
2008-11-20 20:01:55 +00:00
*print_header = 0;
}
if (object == 0) {
dn = DMU_META_DNODE(os);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
dmu_object_info_from_dnode(dn, &doi);
2008-11-20 20:01:55 +00:00
} else {
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
/*
* Encrypted datasets will have sensitive bonus buffers
* encrypted. Therefore we cannot hold the bonus buffer and
* must hold the dnode itself instead.
*/
error = dmu_object_info(os, object, &doi);
2008-11-20 20:01:55 +00:00
if (error)
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
fatal("dmu_object_info() failed, errno %u", error);
if (os->os_encrypted &&
DMU_OT_IS_ENCRYPTED(doi.doi_bonus_type)) {
error = dnode_hold(os, object, FTAG, &dn);
if (error)
fatal("dnode_hold() failed, errno %u", error);
dnode_held = B_TRUE;
} else {
error = dmu_bonus_hold(os, object, FTAG, &db);
if (error)
fatal("dmu_bonus_hold(%llu) failed, errno %u",
object, error);
bonus = db->db_data;
bsize = db->db_size;
dn = DB_DNODE((dmu_buf_impl_t *)db);
}
2008-11-20 20:01:55 +00:00
}
2020-01-24 19:00:46 +00:00
/*
* Default to showing all object types if no flags were specified.
*/
if (flags != 0 && flags != ZOR_FLAG_ALL_TYPES &&
!match_object_type(doi.doi_type, flags))
goto out;
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-05 23:15:04 +00:00
if (dnode_slots_used)
*dnode_slots_used = doi.doi_dnodesize / DNODE_MIN_SIZE;
zdb_nicenum(doi.doi_metadata_block_size, iblk, sizeof (iblk));
zdb_nicenum(doi.doi_data_block_size, dblk, sizeof (dblk));
zdb_nicenum(doi.doi_max_offset, lsize, sizeof (lsize));
zdb_nicenum(doi.doi_physical_blocks_512 << 9, asize, sizeof (asize));
zdb_nicenum(doi.doi_bonus_size, bonus_size, sizeof (bonus_size));
zdb_nicenum(doi.doi_dnodesize, dnsize, sizeof (dnsize));
(void) sprintf(fill, "%6.2f", 100.0 * doi.doi_fill_count *
doi.doi_data_block_size / (object == 0 ? DNODES_PER_BLOCK : 1) /
doi.doi_max_offset);
2008-11-20 20:01:55 +00:00
aux[0] = '\0';
if (doi.doi_checksum != ZIO_CHECKSUM_INHERIT || verbosity >= 6) {
(void) snprintf(aux + strlen(aux), sizeof (aux) - strlen(aux),
" (K=%s)", ZDB_CHECKSUM_NAME(doi.doi_checksum));
2008-11-20 20:01:55 +00:00
}
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
if (doi.doi_compress == ZIO_COMPRESS_INHERIT &&
ZIO_COMPRESS_HASLEVEL(os->os_compress) && verbosity >= 6) {
const char *compname = NULL;
if (zfs_prop_index_to_string(ZFS_PROP_COMPRESSION,
ZIO_COMPRESS_RAW(os->os_compress, os->os_complevel),
&compname) == 0) {
(void) snprintf(aux + strlen(aux),
sizeof (aux) - strlen(aux), " (Z=inherit=%s)",
compname);
} else {
(void) snprintf(aux + strlen(aux),
sizeof (aux) - strlen(aux),
" (Z=inherit=%s-unknown)",
ZDB_COMPRESS_NAME(os->os_compress));
}
} else if (doi.doi_compress == ZIO_COMPRESS_INHERIT && verbosity >= 6) {
(void) snprintf(aux + strlen(aux), sizeof (aux) - strlen(aux),
" (Z=inherit=%s)", ZDB_COMPRESS_NAME(os->os_compress));
} else if (doi.doi_compress != ZIO_COMPRESS_INHERIT || verbosity >= 6) {
(void) snprintf(aux + strlen(aux), sizeof (aux) - strlen(aux),
" (Z=%s)", ZDB_COMPRESS_NAME(doi.doi_compress));
2008-11-20 20:01:55 +00:00
}
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
(void) printf("%10lld %3u %5s %5s %5s %6s %5s %6s %s%s\n",
(u_longlong_t)object, doi.doi_indirection, iblk, dblk,
asize, dnsize, lsize, fill, zdb_ot_name(doi.doi_type), aux);
2008-11-20 20:01:55 +00:00
if (doi.doi_bonus_type != DMU_OT_NONE && verbosity > 3) {
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
(void) printf("%10s %3s %5s %5s %5s %5s %5s %6s %s\n",
"", "", "", "", "", "", bonus_size, "bonus",
zdb_ot_name(doi.doi_bonus_type));
2008-11-20 20:01:55 +00:00
}
if (verbosity >= 4) {
(void) printf("\tdnode flags: %s%s%s%s\n",
2009-07-02 22:44:48 +00:00
(dn->dn_phys->dn_flags & DNODE_FLAG_USED_BYTES) ?
"USED_BYTES " : "",
(dn->dn_phys->dn_flags & DNODE_FLAG_USERUSED_ACCOUNTED) ?
"USERUSED_ACCOUNTED " : "",
(dn->dn_phys->dn_flags & DNODE_FLAG_USEROBJUSED_ACCOUNTED) ?
"USEROBJUSED_ACCOUNTED " : "",
(dn->dn_phys->dn_flags & DNODE_FLAG_SPILL_BLKPTR) ?
"SPILL_BLKPTR" : "");
2009-07-02 22:44:48 +00:00
(void) printf("\tdnode maxblkid: %llu\n",
(longlong_t)dn->dn_phys->dn_maxblkid);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
if (!dnode_held) {
object_viewer[ZDB_OT_TYPE(doi.doi_bonus_type)](os,
object, bonus, bsize);
} else {
(void) printf("\t\t(bonus encrypted)\n");
}
if (!os->os_encrypted || !DMU_OT_IS_ENCRYPTED(doi.doi_type)) {
object_viewer[ZDB_OT_TYPE(doi.doi_type)](os, object,
NULL, 0);
} else {
(void) printf("\t\t(object encrypted)\n");
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
*print_header = B_TRUE;
2008-11-20 20:01:55 +00:00
}
if (verbosity >= 5)
dump_indirect(dn);
2008-11-20 20:01:55 +00:00
if (verbosity >= 5) {
/*
* Report the list of segments that comprise the object.
*/
uint64_t start = 0;
uint64_t end;
uint64_t blkfill = 1;
int minlvl = 1;
if (dn->dn_type == DMU_OT_DNODE) {
minlvl = 0;
blkfill = DNODES_PER_BLOCK;
}
for (;;) {
char segsize[32];
/* make sure nicenum has enough space */
CTASSERT(sizeof (segsize) >= NN_NUMBUF_SZ);
error = dnode_next_offset(dn,
0, &start, minlvl, blkfill, 0);
2008-11-20 20:01:55 +00:00
if (error)
break;
end = start;
error = dnode_next_offset(dn,
DNODE_FIND_HOLE, &end, minlvl, blkfill, 0);
zdb_nicenum(end - start, segsize, sizeof (segsize));
2008-11-20 20:01:55 +00:00
(void) printf("\t\tsegment [%016llx, %016llx)"
" size %5s\n", (u_longlong_t)start,
(u_longlong_t)end, segsize);
if (error)
break;
start = end;
}
}
2020-01-24 19:00:46 +00:00
out:
2008-11-20 20:01:55 +00:00
if (db != NULL)
dmu_buf_rele(db, FTAG);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
if (dnode_held)
dnode_rele(dn, FTAG);
2008-11-20 20:01:55 +00:00
}
static void
count_dir_mos_objects(dsl_dir_t *dd)
{
mos_obj_refd(dd->dd_object);
mos_obj_refd(dsl_dir_phys(dd)->dd_child_dir_zapobj);
mos_obj_refd(dsl_dir_phys(dd)->dd_deleg_zapobj);
mos_obj_refd(dsl_dir_phys(dd)->dd_props_zapobj);
mos_obj_refd(dsl_dir_phys(dd)->dd_clones);
/*
* The dd_crypto_obj can be referenced by multiple dsl_dir's.
* Ignore the references after the first one.
*/
mos_obj_refd_multiple(dd->dd_crypto_obj);
}
static void
count_ds_mos_objects(dsl_dataset_t *ds)
{
mos_obj_refd(ds->ds_object);
mos_obj_refd(dsl_dataset_phys(ds)->ds_next_clones_obj);
mos_obj_refd(dsl_dataset_phys(ds)->ds_props_obj);
mos_obj_refd(dsl_dataset_phys(ds)->ds_userrefs_obj);
mos_obj_refd(dsl_dataset_phys(ds)->ds_snapnames_zapobj);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
mos_obj_refd(ds->ds_bookmarks_obj);
if (!dsl_dataset_is_snapshot(ds)) {
count_dir_mos_objects(ds->ds_dir);
}
}
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
static const char *objset_types[DMU_OST_NUMTYPES] = {
2008-11-20 20:01:55 +00:00
"NONE", "META", "ZPL", "ZVOL", "OTHER", "ANY" };
2020-01-24 19:00:46 +00:00
/*
* Parse a string denoting a range of object IDs of the form
* <start>[:<end>[:flags]], and store the results in zor.
* Return 0 on success. On error, return 1 and update the msg
* pointer to point to a descriptive error message.
*/
static int
parse_object_range(char *range, zopt_object_range_t *zor, char **msg)
{
uint64_t flags = 0;
char *p, *s, *dup, *flagstr;
size_t len;
int i;
int rc = 0;
if (strchr(range, ':') == NULL) {
zor->zor_obj_start = strtoull(range, &p, 0);
if (*p != '\0') {
*msg = "Invalid characters in object ID";
rc = 1;
}
zor->zor_obj_end = zor->zor_obj_start;
return (rc);
}
if (strchr(range, ':') == range) {
*msg = "Invalid leading colon";
rc = 1;
return (rc);
}
len = strlen(range);
if (range[len - 1] == ':') {
*msg = "Invalid trailing colon";
rc = 1;
return (rc);
}
dup = strdup(range);
s = strtok(dup, ":");
zor->zor_obj_start = strtoull(s, &p, 0);
if (*p != '\0') {
*msg = "Invalid characters in start object ID";
rc = 1;
goto out;
}
s = strtok(NULL, ":");
zor->zor_obj_end = strtoull(s, &p, 0);
if (*p != '\0') {
*msg = "Invalid characters in end object ID";
rc = 1;
goto out;
}
if (zor->zor_obj_start > zor->zor_obj_end) {
*msg = "Start object ID may not exceed end object ID";
rc = 1;
goto out;
}
s = strtok(NULL, ":");
if (s == NULL) {
zor->zor_flags = ZOR_FLAG_ALL_TYPES;
goto out;
} else if (strtok(NULL, ":") != NULL) {
*msg = "Invalid colon-delimited field after flags";
rc = 1;
goto out;
}
flagstr = s;
for (i = 0; flagstr[i]; i++) {
int bit;
boolean_t negation = (flagstr[i] == '-');
if (negation) {
i++;
if (flagstr[i] == '\0') {
*msg = "Invalid trailing negation operator";
rc = 1;
goto out;
}
}
bit = flagbits[(uchar_t)flagstr[i]];
if (bit == 0) {
*msg = "Invalid flag";
rc = 1;
goto out;
}
if (negation)
flags &= ~bit;
else
flags |= bit;
}
zor->zor_flags = flags;
out:
free(dup);
return (rc);
}
2008-11-20 20:01:55 +00:00
static void
dump_objset(objset_t *os)
2008-11-20 20:01:55 +00:00
{
dmu_objset_stats_t dds = { 0 };
2008-11-20 20:01:55 +00:00
uint64_t object, object_count;
uint64_t refdbytes, usedobjs, scratch;
char numbuf[32];
2009-07-02 22:44:48 +00:00
char blkbuf[BP_SPRINTF_LEN + 20];
char osname[ZFS_MAX_DATASET_NAME_LEN];
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
const char *type = "UNKNOWN";
2008-11-20 20:01:55 +00:00
int verbosity = dump_opt['d'];
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
boolean_t print_header;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
unsigned i;
int error;
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-05 23:15:04 +00:00
uint64_t total_slots_used = 0;
uint64_t max_slot_used = 0;
uint64_t dnode_slots;
2020-01-24 19:00:46 +00:00
uint64_t obj_start;
uint64_t obj_end;
uint64_t flags;
2008-11-20 20:01:55 +00:00
/* make sure nicenum has enough space */
CTASSERT(sizeof (numbuf) >= NN_NUMBUF_SZ);
dsl_pool_config_enter(dmu_objset_pool(os), FTAG);
2008-11-20 20:01:55 +00:00
dmu_objset_fast_stat(os, &dds);
dsl_pool_config_exit(dmu_objset_pool(os), FTAG);
2008-11-20 20:01:55 +00:00
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
print_header = B_TRUE;
2008-11-20 20:01:55 +00:00
if (dds.dds_type < DMU_OST_NUMTYPES)
type = objset_types[dds.dds_type];
if (dds.dds_type == DMU_OST_META) {
dds.dds_creation_txg = TXG_INITIAL;
usedobjs = BP_GET_FILL(os->os_rootbp);
refdbytes = dsl_dir_phys(os->os_spa->spa_dsl_pool->dp_mos_dir)->
dd_used_bytes;
2008-11-20 20:01:55 +00:00
} else {
dmu_objset_space(os, &refdbytes, &scratch, &usedobjs, &scratch);
}
ASSERT3U(usedobjs, ==, BP_GET_FILL(os->os_rootbp));
2008-11-20 20:01:55 +00:00
zdb_nicenum(refdbytes, numbuf, sizeof (numbuf));
2008-11-20 20:01:55 +00:00
if (verbosity >= 4) {
(void) snprintf(blkbuf, sizeof (blkbuf), ", rootbp ");
(void) snprintf_blkptr(blkbuf + strlen(blkbuf),
sizeof (blkbuf) - strlen(blkbuf), os->os_rootbp);
2008-11-20 20:01:55 +00:00
} else {
blkbuf[0] = '\0';
}
dmu_objset_name(os, osname);
(void) printf("Dataset %s [%s], ID %llu, cr_txg %llu, "
"%s, %llu objects%s%s\n",
2008-11-20 20:01:55 +00:00
osname, type, (u_longlong_t)dmu_objset_id(os),
(u_longlong_t)dds.dds_creation_txg,
numbuf, (u_longlong_t)usedobjs, blkbuf,
(dds.dds_inconsistent) ? " (inconsistent)" : "");
2008-11-20 20:01:55 +00:00
2020-01-24 19:00:46 +00:00
for (i = 0; i < zopt_object_args; i++) {
obj_start = zopt_object_ranges[i].zor_obj_start;
obj_end = zopt_object_ranges[i].zor_obj_end;
flags = zopt_object_ranges[i].zor_flags;
object = obj_start;
if (object == 0 || obj_start == obj_end)
dump_object(os, object, verbosity, &print_header, NULL,
flags);
else
object--;
while ((dmu_object_next(os, &object, B_FALSE, 0) == 0) &&
object <= obj_end) {
dump_object(os, object, verbosity, &print_header, NULL,
flags);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
}
2020-01-24 19:00:46 +00:00
}
if (zopt_object_args > 0) {
2008-11-20 20:01:55 +00:00
(void) printf("\n");
return;
}
if (dump_opt['i'] != 0 || verbosity >= 2)
dump_intent_log(dmu_objset_zil(os));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
if (dmu_objset_ds(os) != NULL) {
dsl_dataset_t *ds = dmu_objset_ds(os);
dump_blkptr_list(&ds->ds_deadlist, "Deadlist");
if (dsl_deadlist_is_open(&ds->ds_dir->dd_livelist) &&
!dmu_objset_is_snapshot(os)) {
dump_blkptr_list(&ds->ds_dir->dd_livelist, "Livelist");
if (verify_dd_livelist(os) != 0)
fatal("livelist is incorrect");
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
if (dsl_dataset_remap_deadlist_exists(ds)) {
(void) printf("ds_remap_deadlist:\n");
dump_blkptr_list(&ds->ds_remap_deadlist, "Deadlist");
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
}
count_ds_mos_objects(ds);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
if (dmu_objset_ds(os) != NULL)
dump_bookmarks(os, verbosity);
if (verbosity < 2)
return;
if (BP_IS_HOLE(os->os_rootbp))
return;
2020-01-24 19:00:46 +00:00
dump_object(os, 0, verbosity, &print_header, NULL, 0);
2009-07-02 22:44:48 +00:00
object_count = 0;
if (DMU_USERUSED_DNODE(os) != NULL &&
DMU_USERUSED_DNODE(os)->dn_type != 0) {
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-05 23:15:04 +00:00
dump_object(os, DMU_USERUSED_OBJECT, verbosity, &print_header,
2020-01-24 19:00:46 +00:00
NULL, 0);
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-05 23:15:04 +00:00
dump_object(os, DMU_GROUPUSED_OBJECT, verbosity, &print_header,
2020-01-24 19:00:46 +00:00
NULL, 0);
2009-07-02 22:44:48 +00:00
}
2008-11-20 20:01:55 +00:00
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-13 22:54:54 +00:00
if (DMU_PROJECTUSED_DNODE(os) != NULL &&
DMU_PROJECTUSED_DNODE(os)->dn_type != 0)
dump_object(os, DMU_PROJECTUSED_OBJECT, verbosity,
2020-01-24 19:00:46 +00:00
&print_header, NULL, 0);
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-13 22:54:54 +00:00
2008-11-20 20:01:55 +00:00
object = 0;
while ((error = dmu_object_next(os, &object, B_FALSE, 0)) == 0) {
2020-01-24 19:00:46 +00:00
dump_object(os, object, verbosity, &print_header, &dnode_slots,
0);
2008-11-20 20:01:55 +00:00
object_count++;
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-05 23:15:04 +00:00
total_slots_used += dnode_slots;
max_slot_used = object + dnode_slots - 1;
2008-11-20 20:01:55 +00:00
}
(void) printf("\n");
Improved dnode allocation and dmu_hold_impl() Refactor dmu_object_alloc_dnsize() and dnode_hold_impl() to simplify the code, fix errors introduced by commit dbeb879 (PR #6117) interacting badly with large dnodes, and improve performance. * When allocating a new dnode in dmu_object_alloc_dnsize(), update the percpu object ID for the core's metadnode chunk immediately. This eliminates most lock contention when taking the hold and creating the dnode. * Correct detection of the chunk boundary to work properly with large dnodes. * Separate the dmu_hold_impl() code for the FREE case from the code for the ALLOCATED case to make it easier to read. * Fully populate the dnode handle array immediately after reading a block of the metadnode from disk. Subsequently the dnode handle array provides enough information to determine which dnode slots are in use and which are free. * Add several kstats to allow the behavior of the code to be examined. * Verify dnode packing in large_dnode_008_pos.ksh. Since the test is purely creates, it should leave very few holes in the metadnode. * Add test large_dnode_009_pos.ksh, which performs concurrent creates and deletes, to complement existing test which does only creates. With the above fixes, there is very little contention in a test of about 200,000 racing dnode allocations produced by tests 'large_dnode_008_pos' and 'large_dnode_009_pos'. name type data dnode_hold_dbuf_hold 4 0 dnode_hold_dbuf_read 4 0 dnode_hold_alloc_hits 4 3804690 dnode_hold_alloc_misses 4 216 dnode_hold_alloc_interior 4 3 dnode_hold_alloc_lock_retry 4 0 dnode_hold_alloc_lock_misses 4 0 dnode_hold_alloc_type_none 4 0 dnode_hold_free_hits 4 203105 dnode_hold_free_misses 4 4 dnode_hold_free_lock_misses 4 0 dnode_hold_free_lock_retry 4 0 dnode_hold_free_overflow 4 0 dnode_hold_free_refcount 4 57 dnode_hold_free_txg 4 0 dnode_allocate 4 203154 dnode_reallocate 4 0 dnode_buf_evict 4 23918 dnode_alloc_next_chunk 4 4887 dnode_alloc_race 4 0 dnode_alloc_next_block 4 18 The performance is slightly improved for concurrent creates with 16+ threads, and unchanged for low thread counts. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5396 Closes #6522 Closes #6414 Closes #6564
2017-09-05 23:15:04 +00:00
(void) printf(" Dnode slots:\n");
(void) printf("\tTotal used: %10llu\n",
(u_longlong_t)total_slots_used);
(void) printf("\tMax used: %10llu\n",
(u_longlong_t)max_slot_used);
(void) printf("\tPercent empty: %10lf\n",
(double)(max_slot_used - total_slots_used)*100 /
(double)max_slot_used);
(void) printf("\n");
2009-07-02 22:44:48 +00:00
if (error != ESRCH) {
(void) fprintf(stderr, "dmu_object_next() = %d\n", error);
abort();
}
ASSERT3U(object_count, ==, usedobjs);
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 17:35:20 +00:00
if (leaked_objects != 0) {
(void) printf("%d potentially leaked objects detected\n",
leaked_objects);
leaked_objects = 0;
}
2008-11-20 20:01:55 +00:00
}
static void
dump_uberblock(uberblock_t *ub, const char *header, const char *footer)
2008-11-20 20:01:55 +00:00
{
time_t timestamp = ub->ub_timestamp;
(void) printf("%s", header ? header : "");
2008-11-20 20:01:55 +00:00
(void) printf("\tmagic = %016llx\n", (u_longlong_t)ub->ub_magic);
(void) printf("\tversion = %llu\n", (u_longlong_t)ub->ub_version);
(void) printf("\ttxg = %llu\n", (u_longlong_t)ub->ub_txg);
(void) printf("\tguid_sum = %llu\n", (u_longlong_t)ub->ub_guid_sum);
(void) printf("\ttimestamp = %llu UTC = %s",
(u_longlong_t)ub->ub_timestamp, asctime(localtime(&timestamp)));
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
(void) printf("\tmmp_magic = %016llx\n",
(u_longlong_t)ub->ub_mmp_magic);
MMP interval and fail_intervals in uberblock When Multihost is enabled, and a pool is imported, uberblock writes include ub_mmp_delay to allow an importing node to calculate the duration of an activity test. This value, is not enough information. If zfs_multihost_fail_intervals > 0 on the node with the pool imported, the safe minimum duration of the activity test is well defined, but does not depend on ub_mmp_delay: zfs_multihost_fail_intervals * zfs_multihost_interval and if zfs_multihost_fail_intervals == 0 on that node, there is no such well defined safe duration, but the importing host cannot tell whether mmp_delay is high due to I/O delays, or due to a very large zfs_multihost_interval setting on the host which last imported the pool. As a result, it may use a far longer period for the activity test than is necessary. This patch renames ub_mmp_sequence to ub_mmp_config and uses it to record the zfs_multihost_interval and zfs_multihost_fail_intervals values, as well as the mmp sequence. This allows a shorter activity test duration to be calculated by the importing host in most situations. These values are also added to the multihost_history kstat records. It calculates the activity test duration differently depending on whether the new fields are present or not; for importing pools with only ub_mmp_delay, it uses (zfs_multihost_interval + ub_mmp_delay) * zfs_multihost_import_intervals Which results in an activity test duration less sensitive to the leaf count. In addition, it makes a few other improvements: * It updates the "sequence" part of ub_mmp_config when MMP writes in between syncs occur. This allows an importing host to detect MMP on the remote host sooner, when the pool is idle, as it is not limited to the granularity of ub_timestamp (1 second). * It issues writes immediately when zfs_multihost_interval is changed so remote hosts see the updated value as soon as possible. * It fixes a bug where setting zfs_multihost_fail_intervals = 1 results in immediate pool suspension. * Update tests to verify activity check duration is based on recorded tunable values, not tunable values on importing host. * Update tests to verify the expected number of uberblocks have valid MMP fields - fail_intervals, mmp_interval, mmp_seq (sequence number), that sequence number is incrementing, and that uberblock values match tunable settings. Reviewed-by: Andreas Dilger <andreas.dilger@whamcloud.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #7842
2019-03-21 19:47:57 +00:00
if (MMP_VALID(ub)) {
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
(void) printf("\tmmp_delay = %0llu\n",
(u_longlong_t)ub->ub_mmp_delay);
MMP interval and fail_intervals in uberblock When Multihost is enabled, and a pool is imported, uberblock writes include ub_mmp_delay to allow an importing node to calculate the duration of an activity test. This value, is not enough information. If zfs_multihost_fail_intervals > 0 on the node with the pool imported, the safe minimum duration of the activity test is well defined, but does not depend on ub_mmp_delay: zfs_multihost_fail_intervals * zfs_multihost_interval and if zfs_multihost_fail_intervals == 0 on that node, there is no such well defined safe duration, but the importing host cannot tell whether mmp_delay is high due to I/O delays, or due to a very large zfs_multihost_interval setting on the host which last imported the pool. As a result, it may use a far longer period for the activity test than is necessary. This patch renames ub_mmp_sequence to ub_mmp_config and uses it to record the zfs_multihost_interval and zfs_multihost_fail_intervals values, as well as the mmp sequence. This allows a shorter activity test duration to be calculated by the importing host in most situations. These values are also added to the multihost_history kstat records. It calculates the activity test duration differently depending on whether the new fields are present or not; for importing pools with only ub_mmp_delay, it uses (zfs_multihost_interval + ub_mmp_delay) * zfs_multihost_import_intervals Which results in an activity test duration less sensitive to the leaf count. In addition, it makes a few other improvements: * It updates the "sequence" part of ub_mmp_config when MMP writes in between syncs occur. This allows an importing host to detect MMP on the remote host sooner, when the pool is idle, as it is not limited to the granularity of ub_timestamp (1 second). * It issues writes immediately when zfs_multihost_interval is changed so remote hosts see the updated value as soon as possible. * It fixes a bug where setting zfs_multihost_fail_intervals = 1 results in immediate pool suspension. * Update tests to verify activity check duration is based on recorded tunable values, not tunable values on importing host. * Update tests to verify the expected number of uberblocks have valid MMP fields - fail_intervals, mmp_interval, mmp_seq (sequence number), that sequence number is incrementing, and that uberblock values match tunable settings. Reviewed-by: Andreas Dilger <andreas.dilger@whamcloud.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #7842
2019-03-21 19:47:57 +00:00
if (MMP_SEQ_VALID(ub))
(void) printf("\tmmp_seq = %u\n",
(unsigned int) MMP_SEQ(ub));
if (MMP_FAIL_INT_VALID(ub))
(void) printf("\tmmp_fail = %u\n",
(unsigned int) MMP_FAIL_INT(ub));
if (MMP_INTERVAL_VALID(ub))
(void) printf("\tmmp_write = %u\n",
(unsigned int) MMP_INTERVAL(ub));
/* After MMP_* to make summarize_uberblock_mmp cleaner */
(void) printf("\tmmp_valid = %x\n",
(unsigned int) ub->ub_mmp_config & 0xFF);
}
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
if (dump_opt['u'] >= 4) {
2008-11-20 20:01:55 +00:00
char blkbuf[BP_SPRINTF_LEN];
snprintf_blkptr(blkbuf, sizeof (blkbuf), &ub->ub_rootbp);
2008-11-20 20:01:55 +00:00
(void) printf("\trootbp = %s\n", blkbuf);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
(void) printf("\tcheckpoint_txg = %llu\n",
(u_longlong_t)ub->ub_checkpoint_txg);
(void) printf("%s", footer ? footer : "");
2008-11-20 20:01:55 +00:00
}
static void
dump_config(spa_t *spa)
2008-11-20 20:01:55 +00:00
{
dmu_buf_t *db;
size_t nvsize = 0;
int error = 0;
2008-11-20 20:01:55 +00:00
error = dmu_bonus_hold(spa->spa_meta_objset,
spa->spa_config_object, FTAG, &db);
if (error == 0) {
nvsize = *(uint64_t *)db->db_data;
dmu_buf_rele(db, FTAG);
(void) printf("\nMOS Configuration:\n");
dump_packed_nvlist(spa->spa_meta_objset,
spa->spa_config_object, (void *)&nvsize, 1);
} else {
(void) fprintf(stderr, "dmu_bonus_hold(%llu) failed, errno %d",
(u_longlong_t)spa->spa_config_object, error);
}
}
static void
dump_cachefile(const char *cachefile)
{
int fd;
struct stat64 statbuf;
char *buf;
nvlist_t *config;
if ((fd = open64(cachefile, O_RDONLY)) < 0) {
(void) printf("cannot open '%s': %s\n", cachefile,
strerror(errno));
exit(1);
}
if (fstat64(fd, &statbuf) != 0) {
(void) printf("failed to stat '%s': %s\n", cachefile,
strerror(errno));
exit(1);
}
if ((buf = malloc(statbuf.st_size)) == NULL) {
(void) fprintf(stderr, "failed to allocate %llu bytes\n",
(u_longlong_t)statbuf.st_size);
exit(1);
}
if (read(fd, buf, statbuf.st_size) != statbuf.st_size) {
(void) fprintf(stderr, "failed to read %llu bytes\n",
(u_longlong_t)statbuf.st_size);
exit(1);
}
(void) close(fd);
if (nvlist_unpack(buf, statbuf.st_size, &config, 0) != 0) {
(void) fprintf(stderr, "failed to unpack nvlist\n");
exit(1);
}
free(buf);
dump_nvlist(config, 0);
nvlist_free(config);
}
/*
* ZFS label nvlist stats
*/
typedef struct zdb_nvl_stats {
int zns_list_count;
int zns_leaf_count;
size_t zns_leaf_largest;
size_t zns_leaf_total;
nvlist_t *zns_string;
nvlist_t *zns_uint64;
nvlist_t *zns_boolean;
} zdb_nvl_stats_t;
static void
collect_nvlist_stats(nvlist_t *nvl, zdb_nvl_stats_t *stats)
{
nvlist_t *list, **array;
nvpair_t *nvp = NULL;
char *name;
uint_t i, items;
stats->zns_list_count++;
while ((nvp = nvlist_next_nvpair(nvl, nvp)) != NULL) {
name = nvpair_name(nvp);
switch (nvpair_type(nvp)) {
case DATA_TYPE_STRING:
fnvlist_add_string(stats->zns_string, name,
fnvpair_value_string(nvp));
break;
case DATA_TYPE_UINT64:
fnvlist_add_uint64(stats->zns_uint64, name,
fnvpair_value_uint64(nvp));
break;
case DATA_TYPE_BOOLEAN:
fnvlist_add_boolean(stats->zns_boolean, name);
break;
case DATA_TYPE_NVLIST:
if (nvpair_value_nvlist(nvp, &list) == 0)
collect_nvlist_stats(list, stats);
break;
case DATA_TYPE_NVLIST_ARRAY:
if (nvpair_value_nvlist_array(nvp, &array, &items) != 0)
break;
for (i = 0; i < items; i++) {
collect_nvlist_stats(array[i], stats);
/* collect stats on leaf vdev */
if (strcmp(name, "children") == 0) {
size_t size;
(void) nvlist_size(array[i], &size,
NV_ENCODE_XDR);
stats->zns_leaf_total += size;
if (size > stats->zns_leaf_largest)
stats->zns_leaf_largest = size;
stats->zns_leaf_count++;
}
}
break;
default:
(void) printf("skip type %d!\n", (int)nvpair_type(nvp));
}
}
}
static void
dump_nvlist_stats(nvlist_t *nvl, size_t cap)
{
zdb_nvl_stats_t stats = { 0 };
size_t size, sum = 0, total;
size_t noise;
/* requires nvlist with non-unique names for stat collection */
VERIFY0(nvlist_alloc(&stats.zns_string, 0, 0));
VERIFY0(nvlist_alloc(&stats.zns_uint64, 0, 0));
VERIFY0(nvlist_alloc(&stats.zns_boolean, 0, 0));
VERIFY0(nvlist_size(stats.zns_boolean, &noise, NV_ENCODE_XDR));
(void) printf("\n\nZFS Label NVList Config Stats:\n");
VERIFY0(nvlist_size(nvl, &total, NV_ENCODE_XDR));
(void) printf(" %d bytes used, %d bytes free (using %4.1f%%)\n\n",
(int)total, (int)(cap - total), 100.0 * total / cap);
collect_nvlist_stats(nvl, &stats);
VERIFY0(nvlist_size(stats.zns_uint64, &size, NV_ENCODE_XDR));
size -= noise;
sum += size;
(void) printf("%12s %4d %6d bytes (%5.2f%%)\n", "integers:",
(int)fnvlist_num_pairs(stats.zns_uint64),
(int)size, 100.0 * size / total);
VERIFY0(nvlist_size(stats.zns_string, &size, NV_ENCODE_XDR));
size -= noise;
sum += size;
(void) printf("%12s %4d %6d bytes (%5.2f%%)\n", "strings:",
(int)fnvlist_num_pairs(stats.zns_string),
(int)size, 100.0 * size / total);
VERIFY0(nvlist_size(stats.zns_boolean, &size, NV_ENCODE_XDR));
size -= noise;
sum += size;
(void) printf("%12s %4d %6d bytes (%5.2f%%)\n", "booleans:",
(int)fnvlist_num_pairs(stats.zns_boolean),
(int)size, 100.0 * size / total);
size = total - sum; /* treat remainder as nvlist overhead */
(void) printf("%12s %4d %6d bytes (%5.2f%%)\n\n", "nvlists:",
stats.zns_list_count, (int)size, 100.0 * size / total);
if (stats.zns_leaf_count > 0) {
size_t average = stats.zns_leaf_total / stats.zns_leaf_count;
(void) printf("%12s %4d %6d bytes average\n", "leaf vdevs:",
stats.zns_leaf_count, (int)average);
(void) printf("%24d bytes largest\n",
(int)stats.zns_leaf_largest);
if (dump_opt['l'] >= 3 && average > 0)
(void) printf(" space for %d additional leaf vdevs\n",
(int)((cap - total) / average));
}
(void) printf("\n");
nvlist_free(stats.zns_string);
nvlist_free(stats.zns_uint64);
nvlist_free(stats.zns_boolean);
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
typedef struct cksum_record {
zio_cksum_t cksum;
boolean_t labels[VDEV_LABELS];
avl_node_t link;
} cksum_record_t;
static int
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
cksum_record_compare(const void *x1, const void *x2)
2008-11-20 20:01:55 +00:00
{
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
const cksum_record_t *l = (cksum_record_t *)x1;
const cksum_record_t *r = (cksum_record_t *)x2;
int arraysize = ARRAY_SIZE(l->cksum.zc_word);
int difference = 0;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
for (int i = 0; i < arraysize; i++) {
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 17:36:03 +00:00
difference = TREE_CMP(l->cksum.zc_word[i], r->cksum.zc_word[i]);
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
if (difference)
break;
}
return (difference);
}
static cksum_record_t *
cksum_record_alloc(zio_cksum_t *cksum, int l)
{
cksum_record_t *rec;
rec = umem_zalloc(sizeof (*rec), UMEM_NOFAIL);
rec->cksum = *cksum;
rec->labels[l] = B_TRUE;
return (rec);
}
static cksum_record_t *
cksum_record_lookup(avl_tree_t *tree, zio_cksum_t *cksum)
{
cksum_record_t lookup = { .cksum = *cksum };
avl_index_t where;
return (avl_find(tree, &lookup, &where));
}
static cksum_record_t *
cksum_record_insert(avl_tree_t *tree, zio_cksum_t *cksum, int l)
{
cksum_record_t *rec;
rec = cksum_record_lookup(tree, cksum);
if (rec) {
rec->labels[l] = B_TRUE;
} else {
rec = cksum_record_alloc(cksum, l);
avl_add(tree, rec);
}
return (rec);
}
static int
first_label(cksum_record_t *rec)
{
for (int i = 0; i < VDEV_LABELS; i++)
if (rec->labels[i])
return (i);
return (-1);
}
static void
print_label_numbers(char *prefix, cksum_record_t *rec)
{
printf("%s", prefix);
for (int i = 0; i < VDEV_LABELS; i++)
if (rec->labels[i] == B_TRUE)
printf("%d ", i);
printf("\n");
}
#define MAX_UBERBLOCK_COUNT (VDEV_UBERBLOCK_RING >> UBERBLOCK_SHIFT)
typedef struct zdb_label {
2008-11-20 20:01:55 +00:00
vdev_label_t label;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
nvlist_t *config_nv;
cksum_record_t *config;
cksum_record_t *uberblocks[MAX_UBERBLOCK_COUNT];
boolean_t header_printed;
boolean_t read_failed;
} zdb_label_t;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
static void
print_label_header(zdb_label_t *label, int l)
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
{
if (dump_opt['q'])
return;
if (label->header_printed == B_TRUE)
return;
(void) printf("------------------------------------\n");
(void) printf("LABEL %d\n", l);
(void) printf("------------------------------------\n");
label->header_printed = B_TRUE;
}
static void
print_l2arc_header(void)
{
(void) printf("------------------------------------\n");
(void) printf("L2ARC device header\n");
(void) printf("------------------------------------\n");
}
static void
print_l2arc_log_blocks(void)
{
(void) printf("------------------------------------\n");
(void) printf("L2ARC device log blocks\n");
(void) printf("------------------------------------\n");
}
static void
dump_l2arc_log_entries(uint64_t log_entries,
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
l2arc_log_ent_phys_t *le, uint64_t i)
{
for (int j = 0; j < log_entries; j++) {
dva_t dva = le[j].le_dva;
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
(void) printf("lb[%4llu]\tle[%4d]\tDVA asize: %llu, "
"vdev: %llu, offset: %llu\n",
(u_longlong_t)i, j + 1,
(u_longlong_t)DVA_GET_ASIZE(&dva),
(u_longlong_t)DVA_GET_VDEV(&dva),
(u_longlong_t)DVA_GET_OFFSET(&dva));
(void) printf("|\t\t\t\tbirth: %llu\n",
(u_longlong_t)le[j].le_birth);
(void) printf("|\t\t\t\tlsize: %llu\n",
(u_longlong_t)L2BLK_GET_LSIZE((&le[j])->le_prop));
(void) printf("|\t\t\t\tpsize: %llu\n",
(u_longlong_t)L2BLK_GET_PSIZE((&le[j])->le_prop));
(void) printf("|\t\t\t\tcompr: %llu\n",
(u_longlong_t)L2BLK_GET_COMPRESS((&le[j])->le_prop));
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
(void) printf("|\t\t\t\tcomplevel: %llu\n",
(u_longlong_t)(&le[j])->le_complevel);
(void) printf("|\t\t\t\ttype: %llu\n",
(u_longlong_t)L2BLK_GET_TYPE((&le[j])->le_prop));
(void) printf("|\t\t\t\tprotected: %llu\n",
(u_longlong_t)L2BLK_GET_PROTECTED((&le[j])->le_prop));
(void) printf("|\t\t\t\tprefetch: %llu\n",
(u_longlong_t)L2BLK_GET_PREFETCH((&le[j])->le_prop));
(void) printf("|\t\t\t\taddress: %llu\n",
(u_longlong_t)le[j].le_daddr);
Add L2ARC arcstats for MFU/MRU buffers and buffer content type Currently the ARC state (MFU/MRU) of cached L2ARC buffer and their content type is unknown. Knowing this information may prove beneficial in adjusting the L2ARC caching policy. This commit adds L2ARC arcstats that display the aligned size (in bytes) of L2ARC buffers according to their content type (data/metadata) and according to their ARC state (MRU/MFU or prefetch). It also expands the existing evict_l2_eligible arcstat to differentiate between MFU and MRU buffers. L2ARC caches buffers from the MRU and MFU lists of ARC. Upon caching a buffer, its ARC state (MRU/MFU) is stored in the L2 header (b_arcs_state). The l2_m{f,r}u_asize arcstats reflect the aligned size (in bytes) of L2ARC buffers according to their ARC state (based on b_arcs_state). We also account for the case where an L2ARC and ARC cached MRU or MRU_ghost buffer transitions to MFU. The l2_prefetch_asize reflects the alinged size (in bytes) of L2ARC buffers that were cached while they had the prefetch flag set in ARC. This is dynamically updated as the prefetch flag of L2ARC buffers changes. When buffers are evicted from ARC, if they are determined to be L2ARC eligible then their logical size is recorded in evict_l2_eligible_m{r,f}u arcstats according to their ARC state upon eviction. Persistent L2ARC: When committing an L2ARC buffer to a log block (L2ARC metadata) its b_arcs_state and prefetch flag is also stored. If the buffer changes its arcstate or prefetch flag this is reflected in the above arcstats. However, the L2ARC metadata cannot currently be updated to reflect this change. Example: L2ARC caches an MRU buffer. L2ARC metadata and arcstats count this as an MRU buffer. The buffer transitions to MFU. The arcstats are updated to reflect this. Upon pool re-import or on/offlining the L2ARC device the arcstats are cleared and the buffer will now be counted as an MRU buffer, as the L2ARC metadata were not updated. Bug fix: - If l2arc_noprefetch is set, arc_read_done clears the L2CACHE flag of an ARC buffer. However, prefetches may be issued in a way that arc_read_done() is bypassed. Instead, move the related code in l2arc_write_eligible() to account for those cases too. Also add a test and update manpages for l2arc_mfuonly module parameter, and update the manpages and code comments for l2arc_noprefetch. Move persist_l2arc tests to l2arc. Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org> Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10743
2020-09-14 17:10:44 +00:00
(void) printf("|\t\t\t\tARC state: %llu\n",
(u_longlong_t)L2BLK_GET_STATE((&le[j])->le_prop));
(void) printf("|\n");
}
(void) printf("\n");
}
static void
dump_l2arc_log_blkptr(l2arc_log_blkptr_t lbps)
{
(void) printf("|\t\tdaddr: %llu\n", (u_longlong_t)lbps.lbp_daddr);
(void) printf("|\t\tpayload_asize: %llu\n",
(u_longlong_t)lbps.lbp_payload_asize);
(void) printf("|\t\tpayload_start: %llu\n",
(u_longlong_t)lbps.lbp_payload_start);
(void) printf("|\t\tlsize: %llu\n",
(u_longlong_t)L2BLK_GET_LSIZE((&lbps)->lbp_prop));
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
(void) printf("|\t\tasize: %llu\n",
(u_longlong_t)L2BLK_GET_PSIZE((&lbps)->lbp_prop));
(void) printf("|\t\tcompralgo: %llu\n",
(u_longlong_t)L2BLK_GET_COMPRESS((&lbps)->lbp_prop));
(void) printf("|\t\tcksumalgo: %llu\n",
(u_longlong_t)L2BLK_GET_CHECKSUM((&lbps)->lbp_prop));
(void) printf("|\n\n");
}
static void
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
dump_l2arc_log_blocks(int fd, l2arc_dev_hdr_phys_t l2dhdr,
l2arc_dev_hdr_phys_t *rebuild)
{
l2arc_log_blk_phys_t this_lb;
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
uint64_t asize;
l2arc_log_blkptr_t lbps[2];
abd_t *abd;
zio_cksum_t cksum;
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
int failed = 0;
l2arc_dev_t dev;
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
if (!dump_opt['q'])
print_l2arc_log_blocks();
bcopy((&l2dhdr)->dh_start_lbps, lbps, sizeof (lbps));
dev.l2ad_evict = l2dhdr.dh_evict;
dev.l2ad_start = l2dhdr.dh_start;
dev.l2ad_end = l2dhdr.dh_end;
if (l2dhdr.dh_start_lbps[0].lbp_daddr == 0) {
/* no log blocks to read */
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
if (!dump_opt['q']) {
(void) printf("No log blocks to read\n");
(void) printf("\n");
}
return;
} else {
dev.l2ad_hand = lbps[0].lbp_daddr +
L2BLK_GET_PSIZE((&lbps[0])->lbp_prop);
}
dev.l2ad_first = !!(l2dhdr.dh_flags & L2ARC_DEV_HDR_EVICT_FIRST);
for (;;) {
if (!l2arc_log_blkptr_valid(&dev, &lbps[0]))
break;
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
/* L2BLK_GET_PSIZE returns aligned size for log blocks */
asize = L2BLK_GET_PSIZE((&lbps[0])->lbp_prop);
if (pread64(fd, &this_lb, asize, lbps[0].lbp_daddr) != asize) {
if (!dump_opt['q']) {
(void) printf("Error while reading next log "
"block\n\n");
}
break;
}
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
fletcher_4_native_varsize(&this_lb, asize, &cksum);
if (!ZIO_CHECKSUM_EQUAL(cksum, lbps[0].lbp_cksum)) {
failed++;
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
if (!dump_opt['q']) {
(void) printf("Invalid cksum\n");
dump_l2arc_log_blkptr(lbps[0]);
}
break;
}
switch (L2BLK_GET_COMPRESS((&lbps[0])->lbp_prop)) {
case ZIO_COMPRESS_OFF:
break;
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
default:
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
abd = abd_alloc_for_io(asize, B_TRUE);
abd_copy_from_buf_off(abd, &this_lb, 0, asize);
zio_decompress_data(L2BLK_GET_COMPRESS(
(&lbps[0])->lbp_prop), abd, &this_lb,
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
asize, sizeof (this_lb), NULL);
abd_free(abd);
break;
}
if (this_lb.lb_magic == BSWAP_64(L2ARC_LOG_BLK_MAGIC))
byteswap_uint64_array(&this_lb, sizeof (this_lb));
if (this_lb.lb_magic != L2ARC_LOG_BLK_MAGIC) {
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
if (!dump_opt['q'])
(void) printf("Invalid log block magic\n\n");
break;
}
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
rebuild->dh_lb_count++;
rebuild->dh_lb_asize += asize;
if (dump_opt['l'] > 1 && !dump_opt['q']) {
(void) printf("lb[%4llu]\tmagic: %llu\n",
(u_longlong_t)rebuild->dh_lb_count,
(u_longlong_t)this_lb.lb_magic);
dump_l2arc_log_blkptr(lbps[0]);
}
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
if (dump_opt['l'] > 2 && !dump_opt['q'])
dump_l2arc_log_entries(l2dhdr.dh_log_entries,
this_lb.lb_entries,
rebuild->dh_lb_count);
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
if (l2arc_range_check_overlap(lbps[1].lbp_payload_start,
lbps[0].lbp_payload_start, dev.l2ad_evict) &&
!dev.l2ad_first)
break;
lbps[0] = lbps[1];
lbps[1] = this_lb.lb_prev_lbp;
}
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
if (!dump_opt['q']) {
(void) printf("log_blk_count:\t %llu with valid cksum\n",
(u_longlong_t)rebuild->dh_lb_count);
(void) printf("\t\t %d with invalid cksum\n", failed);
(void) printf("log_blk_asize:\t %llu\n\n",
(u_longlong_t)rebuild->dh_lb_asize);
}
}
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
static int
dump_l2arc_header(int fd)
{
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
l2arc_dev_hdr_phys_t l2dhdr, rebuild;
int error = B_FALSE;
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
bzero(&l2dhdr, sizeof (l2dhdr));
bzero(&rebuild, sizeof (rebuild));
if (pread64(fd, &l2dhdr, sizeof (l2dhdr),
VDEV_LABEL_START_SIZE) != sizeof (l2dhdr)) {
error = B_TRUE;
} else {
if (l2dhdr.dh_magic == BSWAP_64(L2ARC_DEV_HDR_MAGIC))
byteswap_uint64_array(&l2dhdr, sizeof (l2dhdr));
if (l2dhdr.dh_magic != L2ARC_DEV_HDR_MAGIC)
error = B_TRUE;
}
if (error) {
(void) printf("L2ARC device header not found\n\n");
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
/* Do not return an error here for backward compatibility */
return (0);
} else if (!dump_opt['q']) {
print_l2arc_header();
(void) printf(" magic: %llu\n",
(u_longlong_t)l2dhdr.dh_magic);
(void) printf(" version: %llu\n",
(u_longlong_t)l2dhdr.dh_version);
(void) printf(" pool_guid: %llu\n",
(u_longlong_t)l2dhdr.dh_spa_guid);
(void) printf(" flags: %llu\n",
(u_longlong_t)l2dhdr.dh_flags);
(void) printf(" start_lbps[0]: %llu\n",
(u_longlong_t)
l2dhdr.dh_start_lbps[0].lbp_daddr);
(void) printf(" start_lbps[1]: %llu\n",
(u_longlong_t)
l2dhdr.dh_start_lbps[1].lbp_daddr);
(void) printf(" log_blk_ent: %llu\n",
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
(u_longlong_t)l2dhdr.dh_log_entries);
(void) printf(" start: %llu\n",
(u_longlong_t)l2dhdr.dh_start);
(void) printf(" end: %llu\n",
(u_longlong_t)l2dhdr.dh_end);
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
(void) printf(" evict: %llu\n",
(u_longlong_t)l2dhdr.dh_evict);
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
(void) printf(" lb_asize_refcount: %llu\n",
(u_longlong_t)l2dhdr.dh_lb_asize);
Trim L2ARC The l2arc_evict() function is responsible for evicting buffers which reference the next bytes of the L2ARC device to be overwritten. Teach this function to additionally TRIM that vdev space before it is overwritten if the device has been filled with data. This is done by vdev_trim_simple() which trims by issuing a new type of TRIM, TRIM_TYPE_SIMPLE. We also implement a "Trim Ahead" feature. It is a zfs module parameter, expressed in % of the current write size. This trims ahead of the current write size. A minimum of 64MB will be trimmed. The default is 0 which disables TRIM on L2ARC as it can put significant stress to underlying storage devices. To enable TRIM on L2ARC we set l2arc_trim_ahead > 0. We also implement TRIM of the whole cache device upon addition to a pool, pool creation or when the header of the device is invalid upon importing a pool or onlining a cache device. This is dependent on l2arc_trim_ahead > 0. TRIM of the whole device is done with TRIM_TYPE_MANUAL so that its status can be monitored by zpool status -t. We save the TRIM state for the whole device and the time of completion on-disk in the header, and restore these upon L2ARC rebuild so that zpool status -t can correctly report them. Whole device TRIM is done asynchronously so that the user can export of the pool or remove the cache device while it is trimming (ie if it is too slow). We do not TRIM the whole device if persistent L2ARC has been disabled by l2arc_rebuild_enabled = 0 because we may not want to lose all cached buffers (eg we may want to import the pool with l2arc_rebuild_enabled = 0 only once because of memory pressure). If persistent L2ARC has been disabled by setting the module parameter l2arc_rebuild_blocks_min_l2size to a value greater than the size of the cache device then the whole device is trimmed upon creation or import of a pool if l2arc_trim_ahead > 0. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam D. Moss <c@yotes.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9713 Closes #9789 Closes #10224
2020-06-09 17:15:08 +00:00
(void) printf(" lb_count_refcount: %llu\n",
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
(u_longlong_t)l2dhdr.dh_lb_count);
Trim L2ARC The l2arc_evict() function is responsible for evicting buffers which reference the next bytes of the L2ARC device to be overwritten. Teach this function to additionally TRIM that vdev space before it is overwritten if the device has been filled with data. This is done by vdev_trim_simple() which trims by issuing a new type of TRIM, TRIM_TYPE_SIMPLE. We also implement a "Trim Ahead" feature. It is a zfs module parameter, expressed in % of the current write size. This trims ahead of the current write size. A minimum of 64MB will be trimmed. The default is 0 which disables TRIM on L2ARC as it can put significant stress to underlying storage devices. To enable TRIM on L2ARC we set l2arc_trim_ahead > 0. We also implement TRIM of the whole cache device upon addition to a pool, pool creation or when the header of the device is invalid upon importing a pool or onlining a cache device. This is dependent on l2arc_trim_ahead > 0. TRIM of the whole device is done with TRIM_TYPE_MANUAL so that its status can be monitored by zpool status -t. We save the TRIM state for the whole device and the time of completion on-disk in the header, and restore these upon L2ARC rebuild so that zpool status -t can correctly report them. Whole device TRIM is done asynchronously so that the user can export of the pool or remove the cache device while it is trimming (ie if it is too slow). We do not TRIM the whole device if persistent L2ARC has been disabled by l2arc_rebuild_enabled = 0 because we may not want to lose all cached buffers (eg we may want to import the pool with l2arc_rebuild_enabled = 0 only once because of memory pressure). If persistent L2ARC has been disabled by setting the module parameter l2arc_rebuild_blocks_min_l2size to a value greater than the size of the cache device then the whole device is trimmed upon creation or import of a pool if l2arc_trim_ahead > 0. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam D. Moss <c@yotes.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9713 Closes #9789 Closes #10224
2020-06-09 17:15:08 +00:00
(void) printf(" trim_action_time: %llu\n",
(u_longlong_t)l2dhdr.dh_trim_action_time);
(void) printf(" trim_state: %llu\n\n",
(u_longlong_t)l2dhdr.dh_trim_state);
}
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
dump_l2arc_log_blocks(fd, l2dhdr, &rebuild);
/*
* The total aligned size of log blocks and the number of log blocks
* reported in the header of the device may be less than what zdb
* reports by dump_l2arc_log_blocks() which emulates l2arc_rebuild().
* This happens because dump_l2arc_log_blocks() lacks the memory
* pressure valve that l2arc_rebuild() has. Thus, if we are on a system
* with low memory, l2arc_rebuild will exit prematurely and dh_lb_asize
* and dh_lb_count will be lower to begin with than what exists on the
* device. This is normal and zdb should not exit with an error. The
* opposite case should never happen though, the values reported in the
* header should never be higher than what dump_l2arc_log_blocks() and
* l2arc_rebuild() report. If this happens there is a leak in the
* accounting of log blocks.
*/
if (l2dhdr.dh_lb_asize > rebuild.dh_lb_asize ||
l2dhdr.dh_lb_count > rebuild.dh_lb_count)
return (1);
return (0);
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
static void
dump_config_from_label(zdb_label_t *label, size_t buflen, int l)
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
{
if (dump_opt['q'])
return;
if ((dump_opt['l'] < 3) && (first_label(label->config) != l))
return;
print_label_header(label, l);
dump_nvlist(label->config_nv, 4);
print_label_numbers(" labels = ", label->config);
if (dump_opt['l'] >= 2)
dump_nvlist_stats(label->config_nv, buflen);
}
#define ZDB_MAX_UB_HEADER_SIZE 32
static void
dump_label_uberblocks(zdb_label_t *label, uint64_t ashift, int label_num)
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
{
vdev_t vd;
char header[ZDB_MAX_UB_HEADER_SIZE];
vd.vdev_ashift = ashift;
vd.vdev_top = &vd;
for (int i = 0; i < VDEV_UBERBLOCK_COUNT(&vd); i++) {
uint64_t uoff = VDEV_UBERBLOCK_OFFSET(&vd, i);
uberblock_t *ub = (void *)((char *)&label->label + uoff);
cksum_record_t *rec = label->uberblocks[i];
if (rec == NULL) {
if (dump_opt['u'] >= 2) {
print_label_header(label, label_num);
(void) printf(" Uberblock[%d] invalid\n", i);
}
continue;
}
if ((dump_opt['u'] < 3) && (first_label(rec) != label_num))
continue;
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
if ((dump_opt['u'] < 4) &&
(ub->ub_mmp_magic == MMP_MAGIC) && ub->ub_mmp_delay &&
(i >= VDEV_UBERBLOCK_COUNT(&vd) - MMP_BLOCKS_PER_LABEL))
continue;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
print_label_header(label, label_num);
(void) snprintf(header, ZDB_MAX_UB_HEADER_SIZE,
" Uberblock[%d]\n", i);
dump_uberblock(ub, header, "");
print_label_numbers(" labels = ", rec);
}
}
static char curpath[PATH_MAX];
/*
* Iterate through the path components, recursively passing
* current one's obj and remaining path until we find the obj
* for the last one.
*/
static int
dump_path_impl(objset_t *os, uint64_t obj, char *name, uint64_t *retobj)
{
int err;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
boolean_t header = B_TRUE;
uint64_t child_obj;
char *s;
dmu_buf_t *db;
dmu_object_info_t doi;
if ((s = strchr(name, '/')) != NULL)
*s = '\0';
err = zap_lookup(os, obj, name, 8, 1, &child_obj);
(void) strlcat(curpath, name, sizeof (curpath));
if (err != 0) {
(void) fprintf(stderr, "failed to lookup %s: %s\n",
curpath, strerror(err));
return (err);
}
child_obj = ZFS_DIRENT_OBJ(child_obj);
err = sa_buf_hold(os, child_obj, FTAG, &db);
if (err != 0) {
(void) fprintf(stderr,
"failed to get SA dbuf for obj %llu: %s\n",
(u_longlong_t)child_obj, strerror(err));
return (EINVAL);
}
dmu_object_info_from_db(db, &doi);
sa_buf_rele(db, FTAG);
if (doi.doi_bonus_type != DMU_OT_SA &&
doi.doi_bonus_type != DMU_OT_ZNODE) {
(void) fprintf(stderr, "invalid bonus type %d for obj %llu\n",
doi.doi_bonus_type, (u_longlong_t)child_obj);
return (EINVAL);
}
if (dump_opt['v'] > 6) {
(void) printf("obj=%llu %s type=%d bonustype=%d\n",
(u_longlong_t)child_obj, curpath, doi.doi_type,
doi.doi_bonus_type);
}
(void) strlcat(curpath, "/", sizeof (curpath));
switch (doi.doi_type) {
case DMU_OT_DIRECTORY_CONTENTS:
if (s != NULL && *(s + 1) != '\0')
return (dump_path_impl(os, child_obj, s + 1, retobj));
fallthrough;
case DMU_OT_PLAIN_FILE_CONTENTS:
if (retobj != NULL) {
*retobj = child_obj;
} else {
dump_object(os, child_obj, dump_opt['v'], &header,
NULL, 0);
}
return (0);
default:
(void) fprintf(stderr, "object %llu has non-file/directory "
"type %d\n", (u_longlong_t)obj, doi.doi_type);
break;
}
return (EINVAL);
}
/*
* Dump the blocks for the object specified by path inside the dataset.
*/
static int
dump_path(char *ds, char *path, uint64_t *retobj)
{
int err;
objset_t *os;
uint64_t root_obj;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
err = open_objset(ds, FTAG, &os);
if (err != 0)
return (err);
err = zap_lookup(os, MASTER_NODE_OBJ, ZFS_ROOT_OBJ, 8, 1, &root_obj);
if (err != 0) {
(void) fprintf(stderr, "can't lookup root znode: %s\n",
strerror(err));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
close_objset(os, FTAG);
return (EINVAL);
}
(void) snprintf(curpath, sizeof (curpath), "dataset=%s path=/", ds);
err = dump_path_impl(os, root_obj, path, retobj);
close_objset(os, FTAG);
return (err);
}
static int
zdb_copy_object(objset_t *os, uint64_t srcobj, char *destfile)
{
int err = 0;
uint64_t size, readsize, oursize, offset;
ssize_t writesize;
sa_handle_t *hdl;
(void) printf("Copying object %" PRIu64 " to file %s\n", srcobj,
destfile);
VERIFY3P(os, ==, sa_os);
if ((err = sa_handle_get(os, srcobj, NULL, SA_HDL_PRIVATE, &hdl))) {
(void) printf("Failed to get handle for SA znode\n");
return (err);
}
if ((err = sa_lookup(hdl, sa_attr_table[ZPL_SIZE], &size, 8))) {
(void) sa_handle_destroy(hdl);
return (err);
}
(void) sa_handle_destroy(hdl);
(void) printf("Object %" PRIu64 " is %" PRIu64 " bytes\n", srcobj,
size);
if (size == 0) {
return (EINVAL);
}
int fd = open(destfile, O_WRONLY | O_CREAT | O_TRUNC, 0644);
/*
* We cap the size at 1 mebibyte here to prevent
* allocation failures and nigh-infinite printing if the
* object is extremely large.
*/
oursize = MIN(size, 1 << 20);
offset = 0;
char *buf = kmem_alloc(oursize, KM_NOSLEEP);
if (buf == NULL) {
return (ENOMEM);
}
while (offset < size) {
readsize = MIN(size - offset, 1 << 20);
err = dmu_read(os, srcobj, offset, readsize, buf, 0);
if (err != 0) {
(void) printf("got error %u from dmu_read\n", err);
kmem_free(buf, oursize);
return (err);
}
if (dump_opt['v'] > 3) {
(void) printf("Read offset=%" PRIu64 " size=%" PRIu64
" error=%d\n", offset, readsize, err);
}
writesize = write(fd, buf, readsize);
if (writesize < 0) {
err = errno;
break;
} else if (writesize != readsize) {
/* Incomplete write */
(void) fprintf(stderr, "Short write, only wrote %llu of"
" %" PRIu64 " bytes, exiting...\n",
(u_longlong_t)writesize, readsize);
break;
}
offset += readsize;
}
(void) close(fd);
if (buf != NULL)
kmem_free(buf, oursize);
return (err);
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
static int
dump_label(const char *dev)
{
char path[MAXPATHLEN];
zdb_label_t labels[VDEV_LABELS];
uint64_t psize, ashift, l2cache;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
struct stat64 statbuf;
boolean_t config_found = B_FALSE;
boolean_t error = B_FALSE;
boolean_t read_l2arc_header = B_FALSE;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
avl_tree_t config_tree;
avl_tree_t uberblock_tree;
void *node, *cookie;
int fd;
bzero(labels, sizeof (labels));
2008-11-20 20:01:55 +00:00
/*
* Check if we were given absolute path and use it as is.
* Otherwise if the provided vdev name doesn't point to a file,
* try prepending expected disk paths and partition numbers.
*/
(void) strlcpy(path, dev, sizeof (path));
if (dev[0] != '/' && stat64(path, &statbuf) != 0) {
int error;
error = zfs_resolve_shortname(dev, path, MAXPATHLEN);
if (error == 0 && zfs_dev_is_whole_disk(path)) {
if (zfs_append_partition(path, MAXPATHLEN) == -1)
error = ENOENT;
}
if (error || (stat64(path, &statbuf) != 0)) {
(void) printf("failed to find device %s, try "
"specifying absolute path instead\n", dev);
return (1);
}
}
if ((fd = open64(path, O_RDONLY)) < 0) {
(void) printf("cannot open '%s': %s\n", path, strerror(errno));
2008-11-20 20:01:55 +00:00
exit(1);
}
if (fstat64_blk(fd, &statbuf) != 0) {
(void) printf("failed to stat '%s': %s\n", path,
2008-11-20 20:01:55 +00:00
strerror(errno));
(void) close(fd);
exit(1);
}
if (S_ISBLK(statbuf.st_mode) && zfs_dev_flush(fd) != 0)
(void) printf("failed to invalidate cache '%s' : %s\n", path,
strerror(errno));
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
avl_create(&config_tree, cksum_record_compare,
sizeof (cksum_record_t), offsetof(cksum_record_t, link));
avl_create(&uberblock_tree, cksum_record_compare,
sizeof (cksum_record_t), offsetof(cksum_record_t, link));
2008-11-20 20:01:55 +00:00
psize = statbuf.st_size;
psize = P2ALIGN(psize, (uint64_t)sizeof (vdev_label_t));
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
ashift = SPA_MINBLOCKSHIFT;
2008-11-20 20:01:55 +00:00
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
/*
* 1. Read the label from disk
* 2. Unpack the configuration and insert in config tree.
* 3. Traverse all uberblocks and insert in uberblock tree.
*/
for (int l = 0; l < VDEV_LABELS; l++) {
zdb_label_t *label = &labels[l];
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
char *buf = label->label.vl_vdev_phys.vp_nvlist;
size_t buflen = sizeof (label->label.vl_vdev_phys.vp_nvlist);
nvlist_t *config;
cksum_record_t *rec;
zio_cksum_t cksum;
vdev_t vd;
if (pread64(fd, &label->label, sizeof (label->label),
vdev_label_offset(psize, l, 0)) != sizeof (label->label)) {
if (!dump_opt['q'])
(void) printf("failed to read label %d\n", l);
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
label->read_failed = B_TRUE;
error = B_TRUE;
2008-11-20 20:01:55 +00:00
continue;
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
label->read_failed = B_FALSE;
if (nvlist_unpack(buf, buflen, &config, 0) == 0) {
nvlist_t *vdev_tree = NULL;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
size_t size;
if ((nvlist_lookup_nvlist(config,
ZPOOL_CONFIG_VDEV_TREE, &vdev_tree) != 0) ||
(nvlist_lookup_uint64(vdev_tree,
ZPOOL_CONFIG_ASHIFT, &ashift) != 0))
ashift = SPA_MINBLOCKSHIFT;
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
if (nvlist_size(config, &size, NV_ENCODE_XDR) != 0)
size = buflen;
/* If the device is a cache device clear the header. */
if (!read_l2arc_header) {
if (nvlist_lookup_uint64(config,
ZPOOL_CONFIG_POOL_STATE, &l2cache) == 0 &&
l2cache == POOL_STATE_L2CACHE) {
read_l2arc_header = B_TRUE;
}
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
fletcher_4_native_varsize(buf, size, &cksum);
rec = cksum_record_insert(&config_tree, &cksum, l);
label->config = rec;
label->config_nv = config;
config_found = B_TRUE;
} else {
error = B_TRUE;
2008-11-20 20:01:55 +00:00
}
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
vd.vdev_ashift = ashift;
vd.vdev_top = &vd;
for (int i = 0; i < VDEV_UBERBLOCK_COUNT(&vd); i++) {
uint64_t uoff = VDEV_UBERBLOCK_OFFSET(&vd, i);
uberblock_t *ub = (void *)((char *)label + uoff);
if (uberblock_verify(ub))
continue;
fletcher_4_native_varsize(ub, sizeof (*ub), &cksum);
rec = cksum_record_insert(&uberblock_tree, &cksum, l);
label->uberblocks[i] = rec;
}
}
/*
* Dump the label and uberblocks.
*/
for (int l = 0; l < VDEV_LABELS; l++) {
zdb_label_t *label = &labels[l];
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
size_t buflen = sizeof (label->label.vl_vdev_phys.vp_nvlist);
if (label->read_failed == B_TRUE)
continue;
if (label->config_nv) {
dump_config_from_label(label, buflen, l);
} else {
if (!dump_opt['q'])
(void) printf("failed to unpack label %d\n", l);
}
if (dump_opt['u'])
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
dump_label_uberblocks(label, ashift, l);
nvlist_free(label->config_nv);
2008-11-20 20:01:55 +00:00
}
/*
* Dump the L2ARC header, if existent.
*/
if (read_l2arc_header)
Improvements on persistent L2ARC Functional changes: We implement refcounts of log blocks and their aligned size on the cache device along with two corresponding arcstats. The refcounts are reflected in the header of the device and provide valuable information as to whether log blocks are accounted for correctly. These are dynamically adjusted as log blocks are committed/evicted. zdb also uses this information in the device header and compares it to the corresponding values as reported by dump_l2arc_log_blocks() which emulates l2arc_rebuild(). If the refcounts saved in the device header report higher values, zdb exits with an error. For this feature to work correctly there should be no active writes on the device. This is also employed in the tests of persistent L2ARC. We extend the structure of the cache device header by adding the two new variables mirroring the refcounts after the existing variables to preserve backward compatibility in terms of persistent L2ARC. 1) a new arcstat "l2_log_blk_asize" and refcount "l2ad_lb_asize" which reflect the total aligned size of log blocks on the device. This is also reflected in the header of the cache device as "dh_lb_asize". 2) a new arcstat "l2arc_log_blk_count" and refcount "l2ad_lb_count" which reflect the total number of L2ARC log blocks present on cache devices. It is also reflected in the header of the cache device as "dh_lb_count". In l2arc_rebuild_vdev() if the amount of committed log entries in a log block is 0 and the device header is valid we update the device header. This will facilitate trimming of the whole device in this case when TRIM for L2ARC is implemented. Improve loop protection in l2arc_rebuild() by using the starting offset of the payload of each log block instead of the starting offset of the log block. If the zio in l2arc_write_buffers() fails, restore the lbps array in the header of the device to its previous state in l2arc_write_done(). If l2arc_rebuild() ends the rebuild process without restoring any L2ARC log blocks in ARC and without any other error, this means that the lbps array in the header is pointing to non-existent or invalid log blocks. Reset the device header in this case. In l2arc_rebuild() change the zfs_dbgmsg messages to spa_history_log_internal() making them user visible with zpool history command. Non-functional changes: Make the first test in persistent L2ARC use `zdb -lll` to increase coverage in `zdb.c`. Rename psize with asize when referring to log blocks, since L2ARC_SET_PSIZE stores the vdev aligned size for log blocks. Also rename dh_log_blk_entries to dh_log_entries to make it clear that it is a mirror of l2ad_log_entries. Added comments for both changes. Fix inaccurate comments for example in l2arc_log_blk_restore(). Add asserts at the end in l2arc_evict() and l2arc_write_buffers(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10228
2020-05-07 23:34:03 +00:00
error |= dump_l2arc_header(fd);
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
cookie = NULL;
while ((node = avl_destroy_nodes(&config_tree, &cookie)) != NULL)
umem_free(node, sizeof (cksum_record_t));
cookie = NULL;
while ((node = avl_destroy_nodes(&uberblock_tree, &cookie)) != NULL)
umem_free(node, sizeof (cksum_record_t));
avl_destroy(&config_tree);
avl_destroy(&uberblock_tree);
(void) close(fd);
Dump unique configurations and Uberblocks in zdb -lu For zdb -l, detect when the configuration nvlist in some label l (l>0) is the same as a configuration already dumped. If so, do not dump it. Make a similar check when dumping Uberblocks for zdb -lu. Check whether a label already dumped contains an identical Uberblock. If so, do not dump the Uberblock. When dumping a configuration or Uberblock, state which labels it is found in (0-3), for example: labels = 1 2 3 Detecting redundant uberblocks or configurations is accomplished by calculating checksums of the uberblocks and the packed nvlists containing the configuration. If there is nothing unique to be dumped for a label (ie the configuration and uberblocks have checksums matching those already dumped) print nothing for that label. With additional l's or u's, increase verbosity as follows: -l Dump each unique configuration only once. Indicate which labels it appears in. -ll In addition, dump label space usage stats. -lll Dump every configuration, unique or not. -u Dump each unique, valid, uberblock only once. Indicate which labels it appears in. -uu In addition, state which slots are invalid. -uuu Dump every uberblock, unique or not. -uuuu Dump the uberblock blockpointer (used to be -uuu) Make exit values conform to the manual page. Failing to unpack a configuration nvlist is considered an error, as well as failing to open or read from the device. Add three tests, zdb_00{3,4,5}_pos to verify the above functionality. An example of the output: ------------------------------------ LABEL 0 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 880 < ... redacted ... > features_for_read: com.delphix:hole_birth com.delphix:embedded_data labels = 0 Uberblock[0] magic = 0000000000bab10c version = 5000 txg = 0 guid_sum = 3038694082047428541 timestamp = 1487715500 UTC = Tue Feb 21 14:18:20 2017 labels = 0 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 772 guid_sum = 9045970794941528051 timestamp = 1487727291 UTC = Tue Feb 21 17:34:51 2017 labels = 0 < ... redacted ... > ------------------------------------ LABEL 1 ------------------------------------ version: 5000 name: 'pool' state: 1 txg: 14 < ... redacted ... > com.delphix:embedded_data labels = 1 2 3 Uberblock[4] magic = 0000000000bab10c version = 5000 txg = 4 guid_sum = 7793930272573252584 timestamp = 1487727521 UTC = Tue Feb 21 17:38:41 2017 labels = 1 2 3 < ... redacted ... > Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #5738
2017-03-07 00:01:45 +00:00
return (config_found == B_FALSE ? 2 :
(error == B_TRUE ? 1 : 0));
2008-11-20 20:01:55 +00:00
}
static uint64_t dataset_feature_count[SPA_FEATURES];
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
static uint64_t global_feature_count[SPA_FEATURES];
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
static uint64_t remap_deadlist_count = 0;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
2008-11-20 20:01:55 +00:00
/*ARGSUSED*/
static int
dump_one_objset(const char *dsname, void *arg)
2008-11-20 20:01:55 +00:00
{
int error;
objset_t *os;
spa_feature_t f;
2008-11-20 20:01:55 +00:00
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
error = open_objset(dsname, FTAG, &os);
if (error != 0)
2008-11-20 20:01:55 +00:00
return (0);
for (f = 0; f < SPA_FEATURES; f++) {
if (!dsl_dataset_feature_is_active(dmu_objset_ds(os), f))
continue;
ASSERT(spa_feature_table[f].fi_flags &
ZFEATURE_FLAG_PER_DATASET);
dataset_feature_count[f]++;
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
if (dsl_dataset_remap_deadlist_exists(dmu_objset_ds(os))) {
remap_deadlist_count++;
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
for (dsl_bookmark_node_t *dbn =
avl_first(&dmu_objset_ds(os)->ds_bookmarks); dbn != NULL;
dbn = AVL_NEXT(&dmu_objset_ds(os)->ds_bookmarks, dbn)) {
mos_obj_refd(dbn->dbn_phys.zbm_redaction_obj);
if (dbn->dbn_phys.zbm_redaction_obj != 0)
global_feature_count[SPA_FEATURE_REDACTION_BOOKMARKS]++;
if (dbn->dbn_phys.zbm_flags & ZBM_FLAG_HAS_FBN)
global_feature_count[SPA_FEATURE_BOOKMARK_WRITTEN]++;
}
if (dsl_deadlist_is_open(&dmu_objset_ds(os)->ds_dir->dd_livelist) &&
!dmu_objset_is_snapshot(os)) {
global_feature_count[SPA_FEATURE_LIVELIST]++;
}
dump_objset(os);
close_objset(os, FTAG);
2008-11-20 20:01:55 +00:00
fuid_table_destroy();
return (0);
}
/*
* Block statistics.
2008-11-20 20:01:55 +00:00
*/
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
#define PSIZE_HISTO_SIZE (SPA_OLD_MAXBLOCKSIZE / SPA_MINBLOCKSIZE + 2)
2008-11-20 20:01:55 +00:00
typedef struct zdb_blkstats {
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
uint64_t zb_asize;
uint64_t zb_lsize;
uint64_t zb_psize;
uint64_t zb_count;
uint64_t zb_gangs;
uint64_t zb_ditto_samevdev;
uint64_t zb_ditto_same_ms;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
uint64_t zb_psize_histogram[PSIZE_HISTO_SIZE];
2008-11-20 20:01:55 +00:00
} zdb_blkstats_t;
/*
* Extended object types to report deferred frees and dedup auto-ditto blocks.
*/
#define ZDB_OT_DEFERRED (DMU_OT_NUMTYPES + 0)
#define ZDB_OT_DITTO (DMU_OT_NUMTYPES + 1)
#define ZDB_OT_OTHER (DMU_OT_NUMTYPES + 2)
#define ZDB_OT_TOTAL (DMU_OT_NUMTYPES + 3)
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
static const char *zdb_ot_extname[] = {
"deferred free",
"dedup ditto",
"other",
"Total",
};
2008-11-20 20:01:55 +00:00
#define ZB_TOTAL DN_MAX_LEVELS
Add block histogram to zdb The block histogram tracks the changes to psize, lsize and asize both in the count of the number of blocks (by blocksize) and the total length of all of the blocks for that blocksize. It also keeps a running total of the cumulative size of all of the blocks up to each size to help determine the size of caching SSDs to be added to zfs hardware deployments. The block history counts and lengths are summarized in bins which are powers of two. Even rows with counts of zero are printed. This change is accessed by specifying one of two options: zdb -bbb pool zdb -Pbbb pool The first version prints the table in fixed size columns. The second prints in "parseable" output that can be placed into a CSV file. Fixed Column, nicenum output sample: block psize lsize asize size Count Length Cum. Count Length Cum. Count Length Cum. 512: 3.50K 1.75M 1.75M 3.43K 1.71M 1.71M 3.41K 1.71M 1.71M 1K: 3.65K 3.67M 5.43M 3.43K 3.44M 5.15M 3.50K 3.51M 5.22M 2K: 3.45K 6.92M 12.3M 3.41K 6.83M 12.0M 3.59K 7.26M 12.5M 4K: 3.44K 13.8M 26.1M 3.43K 13.7M 25.7M 3.49K 14.1M 26.6M 8K: 3.42K 27.3M 53.5M 3.41K 27.3M 53.0M 3.44K 27.6M 54.2M 16K: 3.43K 54.9M 108M 3.50K 56.1M 109M 3.42K 54.7M 109M 32K: 3.44K 110M 219M 3.41K 109M 218M 3.43K 110M 219M 64K: 3.41K 218M 437M 3.41K 218M 437M 3.44K 221M 439M 128K: 3.41K 437M 874M 3.70K 474M 911M 3.41K 437M 876M 256K: 3.41K 874M 1.71G 3.41K 874M 1.74G 3.41K 874M 1.71G 512K: 3.41K 1.71G 3.41G 3.41K 1.71G 3.45G 3.41K 1.71G 3.42G 1M: 3.41K 3.41G 6.82G 3.41K 3.41G 6.86G 3.41K 3.41G 6.83G 2M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 4M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 8M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 16M: 0 0 6.82G 0 0 6.86G 0 0 6.83G Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Robert E. Novak <novak5@llnl.gov> Closes: #9158 Closes #10315
2020-06-26 22:09:20 +00:00
#define SPA_MAX_FOR_16M (SPA_MAXBLOCKSHIFT+1)
2008-11-20 20:01:55 +00:00
typedef struct zdb_cb {
zdb_blkstats_t zcb_type[ZB_TOTAL + 1][ZDB_OT_TOTAL + 1];
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
uint64_t zcb_removing_size;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
uint64_t zcb_checkpoint_size;
uint64_t zcb_dedup_asize;
uint64_t zcb_dedup_blocks;
Add block histogram to zdb The block histogram tracks the changes to psize, lsize and asize both in the count of the number of blocks (by blocksize) and the total length of all of the blocks for that blocksize. It also keeps a running total of the cumulative size of all of the blocks up to each size to help determine the size of caching SSDs to be added to zfs hardware deployments. The block history counts and lengths are summarized in bins which are powers of two. Even rows with counts of zero are printed. This change is accessed by specifying one of two options: zdb -bbb pool zdb -Pbbb pool The first version prints the table in fixed size columns. The second prints in "parseable" output that can be placed into a CSV file. Fixed Column, nicenum output sample: block psize lsize asize size Count Length Cum. Count Length Cum. Count Length Cum. 512: 3.50K 1.75M 1.75M 3.43K 1.71M 1.71M 3.41K 1.71M 1.71M 1K: 3.65K 3.67M 5.43M 3.43K 3.44M 5.15M 3.50K 3.51M 5.22M 2K: 3.45K 6.92M 12.3M 3.41K 6.83M 12.0M 3.59K 7.26M 12.5M 4K: 3.44K 13.8M 26.1M 3.43K 13.7M 25.7M 3.49K 14.1M 26.6M 8K: 3.42K 27.3M 53.5M 3.41K 27.3M 53.0M 3.44K 27.6M 54.2M 16K: 3.43K 54.9M 108M 3.50K 56.1M 109M 3.42K 54.7M 109M 32K: 3.44K 110M 219M 3.41K 109M 218M 3.43K 110M 219M 64K: 3.41K 218M 437M 3.41K 218M 437M 3.44K 221M 439M 128K: 3.41K 437M 874M 3.70K 474M 911M 3.41K 437M 876M 256K: 3.41K 874M 1.71G 3.41K 874M 1.74G 3.41K 874M 1.71G 512K: 3.41K 1.71G 3.41G 3.41K 1.71G 3.45G 3.41K 1.71G 3.42G 1M: 3.41K 3.41G 6.82G 3.41K 3.41G 6.86G 3.41K 3.41G 6.83G 2M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 4M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 8M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 16M: 0 0 6.82G 0 0 6.86G 0 0 6.83G Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Robert E. Novak <novak5@llnl.gov> Closes: #9158 Closes #10315
2020-06-26 22:09:20 +00:00
uint64_t zcb_psize_count[SPA_MAX_FOR_16M];
uint64_t zcb_lsize_count[SPA_MAX_FOR_16M];
uint64_t zcb_asize_count[SPA_MAX_FOR_16M];
uint64_t zcb_psize_len[SPA_MAX_FOR_16M];
uint64_t zcb_lsize_len[SPA_MAX_FOR_16M];
uint64_t zcb_asize_len[SPA_MAX_FOR_16M];
uint64_t zcb_psize_total;
uint64_t zcb_lsize_total;
uint64_t zcb_asize_total;
uint64_t zcb_embedded_blocks[NUM_BP_EMBEDDED_TYPES];
uint64_t zcb_embedded_histogram[NUM_BP_EMBEDDED_TYPES]
[BPE_PAYLOAD_SIZE + 1];
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
uint64_t zcb_start;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
hrtime_t zcb_lastprint;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
uint64_t zcb_totalasize;
2008-11-20 20:01:55 +00:00
uint64_t zcb_errors[256];
int zcb_readfails;
int zcb_haderrors;
spa_t *zcb_spa;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
uint32_t **zcb_vd_obsolete_counts;
2008-11-20 20:01:55 +00:00
} zdb_cb_t;
/* test if two DVA offsets from same vdev are within the same metaslab */
static boolean_t
same_metaslab(spa_t *spa, uint64_t vdev, uint64_t off1, uint64_t off2)
{
vdev_t *vd = vdev_lookup_top(spa, vdev);
uint64_t ms_shift = vd->vdev_ms_shift;
return ((off1 >> ms_shift) == (off2 >> ms_shift));
}
Add block histogram to zdb The block histogram tracks the changes to psize, lsize and asize both in the count of the number of blocks (by blocksize) and the total length of all of the blocks for that blocksize. It also keeps a running total of the cumulative size of all of the blocks up to each size to help determine the size of caching SSDs to be added to zfs hardware deployments. The block history counts and lengths are summarized in bins which are powers of two. Even rows with counts of zero are printed. This change is accessed by specifying one of two options: zdb -bbb pool zdb -Pbbb pool The first version prints the table in fixed size columns. The second prints in "parseable" output that can be placed into a CSV file. Fixed Column, nicenum output sample: block psize lsize asize size Count Length Cum. Count Length Cum. Count Length Cum. 512: 3.50K 1.75M 1.75M 3.43K 1.71M 1.71M 3.41K 1.71M 1.71M 1K: 3.65K 3.67M 5.43M 3.43K 3.44M 5.15M 3.50K 3.51M 5.22M 2K: 3.45K 6.92M 12.3M 3.41K 6.83M 12.0M 3.59K 7.26M 12.5M 4K: 3.44K 13.8M 26.1M 3.43K 13.7M 25.7M 3.49K 14.1M 26.6M 8K: 3.42K 27.3M 53.5M 3.41K 27.3M 53.0M 3.44K 27.6M 54.2M 16K: 3.43K 54.9M 108M 3.50K 56.1M 109M 3.42K 54.7M 109M 32K: 3.44K 110M 219M 3.41K 109M 218M 3.43K 110M 219M 64K: 3.41K 218M 437M 3.41K 218M 437M 3.44K 221M 439M 128K: 3.41K 437M 874M 3.70K 474M 911M 3.41K 437M 876M 256K: 3.41K 874M 1.71G 3.41K 874M 1.74G 3.41K 874M 1.71G 512K: 3.41K 1.71G 3.41G 3.41K 1.71G 3.45G 3.41K 1.71G 3.42G 1M: 3.41K 3.41G 6.82G 3.41K 3.41G 6.86G 3.41K 3.41G 6.83G 2M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 4M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 8M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 16M: 0 0 6.82G 0 0 6.86G 0 0 6.83G Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Robert E. Novak <novak5@llnl.gov> Closes: #9158 Closes #10315
2020-06-26 22:09:20 +00:00
/*
* Used to simplify reporting of the histogram data.
*/
typedef struct one_histo {
char *name;
uint64_t *count;
uint64_t *len;
uint64_t cumulative;
} one_histo_t;
/*
* The number of separate histograms processed for psize, lsize and asize.
*/
#define NUM_HISTO 3
/*
* This routine will create a fixed column size output of three different
* histograms showing by blocksize of 512 - 2^ SPA_MAX_FOR_16M
* the count, length and cumulative length of the psize, lsize and
* asize blocks.
*
* All three types of blocks are listed on a single line
*
* By default the table is printed in nicenumber format (e.g. 123K) but
* if the '-P' parameter is specified then the full raw number (parseable)
* is printed out.
*/
static void
dump_size_histograms(zdb_cb_t *zcb)
{
/*
* A temporary buffer that allows us to convert a number into
* a string using zdb_nicenumber to allow either raw or human
* readable numbers to be output.
*/
char numbuf[32];
/*
* Define titles which are used in the headers of the tables
* printed by this routine.
*/
const char blocksize_title1[] = "block";
const char blocksize_title2[] = "size";
const char count_title[] = "Count";
const char length_title[] = "Size";
const char cumulative_title[] = "Cum.";
/*
* Setup the histogram arrays (psize, lsize, and asize).
*/
one_histo_t parm_histo[NUM_HISTO];
parm_histo[0].name = "psize";
parm_histo[0].count = zcb->zcb_psize_count;
parm_histo[0].len = zcb->zcb_psize_len;
parm_histo[0].cumulative = 0;
parm_histo[1].name = "lsize";
parm_histo[1].count = zcb->zcb_lsize_count;
parm_histo[1].len = zcb->zcb_lsize_len;
parm_histo[1].cumulative = 0;
parm_histo[2].name = "asize";
parm_histo[2].count = zcb->zcb_asize_count;
parm_histo[2].len = zcb->zcb_asize_len;
parm_histo[2].cumulative = 0;
(void) printf("\nBlock Size Histogram\n");
/*
* Print the first line titles
*/
if (dump_opt['P'])
(void) printf("\n%s\t", blocksize_title1);
else
(void) printf("\n%7s ", blocksize_title1);
for (int j = 0; j < NUM_HISTO; j++) {
if (dump_opt['P']) {
if (j < NUM_HISTO - 1) {
(void) printf("%s\t\t\t", parm_histo[j].name);
} else {
/* Don't print trailing spaces */
(void) printf(" %s", parm_histo[j].name);
}
} else {
if (j < NUM_HISTO - 1) {
/* Left aligned strings in the output */
(void) printf("%-7s ",
parm_histo[j].name);
} else {
/* Don't print trailing spaces */
(void) printf("%s", parm_histo[j].name);
}
}
}
(void) printf("\n");
/*
* Print the second line titles
*/
if (dump_opt['P']) {
(void) printf("%s\t", blocksize_title2);
} else {
(void) printf("%7s ", blocksize_title2);
}
for (int i = 0; i < NUM_HISTO; i++) {
if (dump_opt['P']) {
(void) printf("%s\t%s\t%s\t",
count_title, length_title, cumulative_title);
} else {
(void) printf("%7s%7s%7s",
count_title, length_title, cumulative_title);
}
}
(void) printf("\n");
/*
* Print the rows
*/
for (int i = SPA_MINBLOCKSHIFT; i < SPA_MAX_FOR_16M; i++) {
/*
* Print the first column showing the blocksize
*/
zdb_nicenum((1ULL << i), numbuf, sizeof (numbuf));
if (dump_opt['P']) {
printf("%s", numbuf);
} else {
printf("%7s:", numbuf);
}
/*
* Print the remaining set of 3 columns per size:
* for psize, lsize and asize
*/
for (int j = 0; j < NUM_HISTO; j++) {
parm_histo[j].cumulative += parm_histo[j].len[i];
zdb_nicenum(parm_histo[j].count[i],
numbuf, sizeof (numbuf));
if (dump_opt['P'])
(void) printf("\t%s", numbuf);
else
(void) printf("%7s", numbuf);
zdb_nicenum(parm_histo[j].len[i],
numbuf, sizeof (numbuf));
if (dump_opt['P'])
(void) printf("\t%s", numbuf);
else
(void) printf("%7s", numbuf);
zdb_nicenum(parm_histo[j].cumulative,
numbuf, sizeof (numbuf));
if (dump_opt['P'])
(void) printf("\t%s", numbuf);
else
(void) printf("%7s", numbuf);
}
(void) printf("\n");
}
}
2008-11-20 20:01:55 +00:00
static void
zdb_count_block(zdb_cb_t *zcb, zilog_t *zilog, const blkptr_t *bp,
dmu_object_type_t type)
2008-11-20 20:01:55 +00:00
{
uint64_t refcnt = 0;
int i;
ASSERT(type < ZDB_OT_TOTAL);
if (zilog && zil_bp_tree_add(zilog, bp) != 0)
return;
spa_config_enter(zcb->zcb_spa, SCL_CONFIG, FTAG, RW_READER);
for (i = 0; i < 4; i++) {
2008-11-20 20:01:55 +00:00
int l = (i < 2) ? BP_GET_LEVEL(bp) : ZB_TOTAL;
int t = (i & 1) ? type : ZDB_OT_TOTAL;
int equal;
2008-11-20 20:01:55 +00:00
zdb_blkstats_t *zb = &zcb->zcb_type[l][t];
zb->zb_asize += BP_GET_ASIZE(bp);
zb->zb_lsize += BP_GET_LSIZE(bp);
zb->zb_psize += BP_GET_PSIZE(bp);
zb->zb_count++;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
/*
* The histogram is only big enough to record blocks up to
* SPA_OLD_MAXBLOCKSIZE; larger blocks go into the last,
* "other", bucket.
*/
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
unsigned idx = BP_GET_PSIZE(bp) >> SPA_MINBLOCKSHIFT;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
idx = MIN(idx, SPA_OLD_MAXBLOCKSIZE / SPA_MINBLOCKSIZE + 1);
zb->zb_psize_histogram[idx]++;
zb->zb_gangs += BP_COUNT_GANG(bp);
switch (BP_GET_NDVAS(bp)) {
case 2:
if (DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[1])) {
zb->zb_ditto_samevdev++;
if (same_metaslab(zcb->zcb_spa,
DVA_GET_VDEV(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[1])))
zb->zb_ditto_same_ms++;
}
break;
case 3:
equal = (DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[1])) +
(DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[2])) +
(DVA_GET_VDEV(&bp->blk_dva[1]) ==
DVA_GET_VDEV(&bp->blk_dva[2]));
if (equal != 0) {
zb->zb_ditto_samevdev++;
if (DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[1]) &&
same_metaslab(zcb->zcb_spa,
DVA_GET_VDEV(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[1])))
zb->zb_ditto_same_ms++;
else if (DVA_GET_VDEV(&bp->blk_dva[0]) ==
DVA_GET_VDEV(&bp->blk_dva[2]) &&
same_metaslab(zcb->zcb_spa,
DVA_GET_VDEV(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[0]),
DVA_GET_OFFSET(&bp->blk_dva[2])))
zb->zb_ditto_same_ms++;
else if (DVA_GET_VDEV(&bp->blk_dva[1]) ==
DVA_GET_VDEV(&bp->blk_dva[2]) &&
same_metaslab(zcb->zcb_spa,
DVA_GET_VDEV(&bp->blk_dva[1]),
DVA_GET_OFFSET(&bp->blk_dva[1]),
DVA_GET_OFFSET(&bp->blk_dva[2])))
zb->zb_ditto_same_ms++;
}
break;
}
2008-11-20 20:01:55 +00:00
}
spa_config_exit(zcb->zcb_spa, SCL_CONFIG, FTAG);
if (BP_IS_EMBEDDED(bp)) {
zcb->zcb_embedded_blocks[BPE_GET_ETYPE(bp)]++;
zcb->zcb_embedded_histogram[BPE_GET_ETYPE(bp)]
[BPE_GET_PSIZE(bp)]++;
return;
}
Add block histogram to zdb The block histogram tracks the changes to psize, lsize and asize both in the count of the number of blocks (by blocksize) and the total length of all of the blocks for that blocksize. It also keeps a running total of the cumulative size of all of the blocks up to each size to help determine the size of caching SSDs to be added to zfs hardware deployments. The block history counts and lengths are summarized in bins which are powers of two. Even rows with counts of zero are printed. This change is accessed by specifying one of two options: zdb -bbb pool zdb -Pbbb pool The first version prints the table in fixed size columns. The second prints in "parseable" output that can be placed into a CSV file. Fixed Column, nicenum output sample: block psize lsize asize size Count Length Cum. Count Length Cum. Count Length Cum. 512: 3.50K 1.75M 1.75M 3.43K 1.71M 1.71M 3.41K 1.71M 1.71M 1K: 3.65K 3.67M 5.43M 3.43K 3.44M 5.15M 3.50K 3.51M 5.22M 2K: 3.45K 6.92M 12.3M 3.41K 6.83M 12.0M 3.59K 7.26M 12.5M 4K: 3.44K 13.8M 26.1M 3.43K 13.7M 25.7M 3.49K 14.1M 26.6M 8K: 3.42K 27.3M 53.5M 3.41K 27.3M 53.0M 3.44K 27.6M 54.2M 16K: 3.43K 54.9M 108M 3.50K 56.1M 109M 3.42K 54.7M 109M 32K: 3.44K 110M 219M 3.41K 109M 218M 3.43K 110M 219M 64K: 3.41K 218M 437M 3.41K 218M 437M 3.44K 221M 439M 128K: 3.41K 437M 874M 3.70K 474M 911M 3.41K 437M 876M 256K: 3.41K 874M 1.71G 3.41K 874M 1.74G 3.41K 874M 1.71G 512K: 3.41K 1.71G 3.41G 3.41K 1.71G 3.45G 3.41K 1.71G 3.42G 1M: 3.41K 3.41G 6.82G 3.41K 3.41G 6.86G 3.41K 3.41G 6.83G 2M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 4M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 8M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 16M: 0 0 6.82G 0 0 6.86G 0 0 6.83G Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Robert E. Novak <novak5@llnl.gov> Closes: #9158 Closes #10315
2020-06-26 22:09:20 +00:00
/*
* The binning histogram bins by powers of two up to
* SPA_MAXBLOCKSIZE rather than creating bins for
* every possible blocksize found in the pool.
*/
int bin = highbit64(BP_GET_PSIZE(bp)) - 1;
zcb->zcb_psize_count[bin]++;
zcb->zcb_psize_len[bin] += BP_GET_PSIZE(bp);
zcb->zcb_psize_total += BP_GET_PSIZE(bp);
bin = highbit64(BP_GET_LSIZE(bp)) - 1;
zcb->zcb_lsize_count[bin]++;
zcb->zcb_lsize_len[bin] += BP_GET_LSIZE(bp);
zcb->zcb_lsize_total += BP_GET_LSIZE(bp);
bin = highbit64(BP_GET_ASIZE(bp)) - 1;
zcb->zcb_asize_count[bin]++;
zcb->zcb_asize_len[bin] += BP_GET_ASIZE(bp);
zcb->zcb_asize_total += BP_GET_ASIZE(bp);
if (dump_opt['L'])
return;
if (BP_GET_DEDUP(bp)) {
ddt_t *ddt;
ddt_entry_t *dde;
ddt = ddt_select(zcb->zcb_spa, bp);
ddt_enter(ddt);
dde = ddt_lookup(ddt, bp, B_FALSE);
if (dde == NULL) {
refcnt = 0;
} else {
ddt_phys_t *ddp = ddt_phys_select(dde, bp);
ddt_phys_decref(ddp);
refcnt = ddp->ddp_refcnt;
if (ddt_phys_total_refcnt(dde) == 0)
ddt_remove(ddt, dde);
2008-11-20 20:01:55 +00:00
}
ddt_exit(ddt);
2008-11-20 20:01:55 +00:00
}
VERIFY3U(zio_wait(zio_claim(NULL, zcb->zcb_spa,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
refcnt ? 0 : spa_min_claim_txg(zcb->zcb_spa),
bp, NULL, NULL, ZIO_FLAG_CANFAIL)), ==, 0);
2008-11-20 20:01:55 +00:00
}
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
static void
zdb_blkptr_done(zio_t *zio)
{
spa_t *spa = zio->io_spa;
blkptr_t *bp = zio->io_bp;
int ioerr = zio->io_error;
zdb_cb_t *zcb = zio->io_private;
zbookmark_phys_t *zb = &zio->io_bookmark;
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
mutex_enter(&spa->spa_scrub_lock);
spa->spa_load_verify_bytes -= BP_GET_PSIZE(bp);
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
cv_broadcast(&spa->spa_scrub_io_cv);
if (ioerr && !(zio->io_flags & ZIO_FLAG_SPECULATIVE)) {
char blkbuf[BP_SPRINTF_LEN];
zcb->zcb_haderrors = 1;
zcb->zcb_errors[ioerr]++;
if (dump_opt['b'] >= 2)
snprintf_blkptr(blkbuf, sizeof (blkbuf), bp);
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
else
blkbuf[0] = '\0';
(void) printf("zdb_blkptr_cb: "
"Got error %d reading "
"<%llu, %llu, %lld, %llx> %s -- skipping\n",
ioerr,
(u_longlong_t)zb->zb_objset,
(u_longlong_t)zb->zb_object,
(u_longlong_t)zb->zb_level,
(u_longlong_t)zb->zb_blkid,
blkbuf);
}
mutex_exit(&spa->spa_scrub_lock);
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-13 21:51:51 +00:00
abd_free(zio->io_abd);
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
}
2008-11-20 20:01:55 +00:00
static int
zdb_blkptr_cb(spa_t *spa, zilog_t *zilog, const blkptr_t *bp,
const zbookmark_phys_t *zb, const dnode_phys_t *dnp, void *arg)
2008-11-20 20:01:55 +00:00
{
zdb_cb_t *zcb = arg;
2009-07-02 22:44:48 +00:00
dmu_object_type_t type;
boolean_t is_metadata;
2008-11-20 20:01:55 +00:00
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
if (zb->zb_level == ZB_DNODE_LEVEL)
return (0);
if (dump_opt['b'] >= 5 && bp->blk_birth > 0) {
char blkbuf[BP_SPRINTF_LEN];
snprintf_blkptr(blkbuf, sizeof (blkbuf), bp);
(void) printf("objset %llu object %llu "
"level %lld offset 0x%llx %s\n",
(u_longlong_t)zb->zb_objset,
(u_longlong_t)zb->zb_object,
(longlong_t)zb->zb_level,
(u_longlong_t)blkid2offset(dnp, bp, zb),
blkbuf);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
if (BP_IS_HOLE(bp) || BP_IS_REDACTED(bp))
return (0);
2009-07-02 22:44:48 +00:00
type = BP_GET_TYPE(bp);
zdb_count_block(zcb, zilog, bp,
(type & DMU_OT_NEWTYPE) ? ZDB_OT_OTHER : type);
is_metadata = (BP_GET_LEVEL(bp) != 0 || DMU_OT_IS_METADATA(type));
if (!BP_IS_EMBEDDED(bp) &&
(dump_opt['c'] > 1 || (dump_opt['c'] && is_metadata))) {
size_t size = BP_GET_PSIZE(bp);
abd_t *abd = abd_alloc(size, B_FALSE);
int flags = ZIO_FLAG_CANFAIL | ZIO_FLAG_SCRUB | ZIO_FLAG_RAW;
2009-07-02 22:44:48 +00:00
/* If it's an intent log block, failure is expected. */
if (zb->zb_level == ZB_ZIL_LEVEL)
flags |= ZIO_FLAG_SPECULATIVE;
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
mutex_enter(&spa->spa_scrub_lock);
while (spa->spa_load_verify_bytes > max_inflight_bytes)
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
cv_wait(&spa->spa_scrub_io_cv, &spa->spa_scrub_lock);
spa->spa_load_verify_bytes += size;
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
mutex_exit(&spa->spa_scrub_lock);
zio_nowait(zio_read(NULL, spa, bp, abd, size,
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
zdb_blkptr_done, zcb, ZIO_PRIORITY_ASYNC_READ, flags, zb));
2008-11-20 20:01:55 +00:00
}
zcb->zcb_readfails = 0;
/* only call gethrtime() every 100 blocks */
static int iters;
if (++iters > 100)
iters = 0;
else
return (0);
if (dump_opt['b'] < 5 && gethrtime() > zcb->zcb_lastprint + NANOSEC) {
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
uint64_t now = gethrtime();
char buf[10];
uint64_t bytes = zcb->zcb_type[ZB_TOTAL][ZDB_OT_TOTAL].zb_asize;
int kb_per_sec =
1 + bytes / (1 + ((now - zcb->zcb_start) / 1000 / 1000));
int sec_remaining =
(zcb->zcb_totalasize - bytes) / 1024 / kb_per_sec;
/* make sure nicenum has enough space */
CTASSERT(sizeof (buf) >= NN_NUMBUF_SZ);
zfs_nicebytes(bytes, buf, sizeof (buf));
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
(void) fprintf(stderr,
"\r%5s completed (%4dMB/s) "
"estimated time remaining: %uhr %02umin %02usec ",
buf, kb_per_sec / 1024,
sec_remaining / 60 / 60,
sec_remaining / 60 % 60,
sec_remaining % 60);
zcb->zcb_lastprint = now;
}
2008-11-20 20:01:55 +00:00
return (0);
}
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
zdb_leak(void *arg, uint64_t start, uint64_t size)
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
vdev_t *vd = arg;
(void) printf("leaked space: vdev %llu, offset 0x%llx, size %llu\n",
(u_longlong_t)vd->vdev_id, (u_longlong_t)start, (u_longlong_t)size);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
static metaslab_ops_t zdb_metaslab_ops = {
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
NULL /* alloc */
};
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
/* ARGSUSED */
static int
load_unflushed_svr_segs_cb(spa_t *spa, space_map_entry_t *sme,
uint64_t txg, void *arg)
{
spa_vdev_removal_t *svr = arg;
uint64_t offset = sme->sme_offset;
uint64_t size = sme->sme_run;
/* skip vdevs we don't care about */
if (sme->sme_vdev != svr->svr_vdev_id)
return (0);
vdev_t *vd = vdev_lookup_top(spa, sme->sme_vdev);
metaslab_t *ms = vd->vdev_ms[offset >> vd->vdev_ms_shift];
ASSERT(sme->sme_type == SM_ALLOC || sme->sme_type == SM_FREE);
if (txg < metaslab_unflushed_txg(ms))
return (0);
if (sme->sme_type == SM_ALLOC)
range_tree_add(svr->svr_allocd_segs, offset, size);
else
range_tree_remove(svr->svr_allocd_segs, offset, size);
return (0);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
/* ARGSUSED */
static void
claim_segment_impl_cb(uint64_t inner_offset, vdev_t *vd, uint64_t offset,
uint64_t size, void *arg)
{
/*
* This callback was called through a remap from
* a device being removed. Therefore, the vdev that
* this callback is applied to is a concrete
* vdev.
*/
ASSERT(vdev_is_concrete(vd));
VERIFY0(metaslab_claim_impl(vd, offset, size,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
spa_min_claim_txg(vd->vdev_spa)));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
}
static void
claim_segment_cb(void *arg, uint64_t offset, uint64_t size)
{
vdev_t *vd = arg;
vdev_indirect_ops.vdev_op_remap(vd, offset, size,
claim_segment_impl_cb, NULL);
}
/*
* After accounting for all allocated blocks that are directly referenced,
* we might have missed a reference to a block from a partially complete
* (and thus unused) indirect mapping object. We perform a secondary pass
* through the metaslabs we have already mapped and claim the destination
* blocks.
*/
static void
zdb_claim_removing(spa_t *spa, zdb_cb_t *zcb)
{
if (dump_opt['L'])
return;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
if (spa->spa_vdev_removal == NULL)
return;
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
spa_vdev_removal_t *svr = spa->spa_vdev_removal;
OpenZFS 9290 - device removal reduces redundancy of mirrors Mirrors are supposed to provide redundancy in the face of whole-disk failure and silent damage (e.g. some data on disk is not right, but ZFS hasn't detected the whole device as being broken). However, the current device removal implementation bypasses some of the mirror's redundancy. Note that in no case is incorrect data returned, but we might get a checksum error when we should have been able to find the right data. There are two underlying problems: 1. When we remove a mirror device, we only read one side of the mirror. Since we can't verify the checksum, this side may be silently bad, but the good data is on the other side of the mirror (which we didn't read). This can cause the removal to "bake in" the busted data – all copies of the data in the new location are the same, busted version, while we left the good version behind. The fix for this is to read and copy both sides of the mirror. If the old and new vdevs are mirrors, we will read both sides of the old mirror, and write each copy to the corresponding side of the new mirror. (If the old and new vdevs have a different number of children, we will do this as best as possible.) Even though we aren't verifying checksums, this ensures that as long as there's a good copy of the data, we'll have a good copy after the removal, even if there's silent damage to one side of the mirror. If we're removing a mirror that has some silent damage, we'll have exactly the same damage in the new location (assuming that the new location is also a mirror). 2. When we read from an indirect vdev that points to a mirror vdev, we only consider one copy of the data. This can lead to reduced effective redundancy, because we might read a bad copy of the data from one side of the mirror, and not retry the other, good side of the mirror. Note that the problem is not with the removal process, but rather after the removal has completed (having copied correct data to both sides of the mirror), if one side of the new mirror is silently damaged, we encounter the problem when reading the relocated data via the indirect vdev. Also note that the problem doesn't occur when ZFS knows that one side of the mirror is bad, e.g. when a disk entirely fails or is offlined. The impact is that reads (from indirect vdevs that point to mirrors) may return a checksum error even though the good data exists on one side of the mirror, and scrub doesn't repair all data on the mirror (if some of it is pointed to via an indirect vdev). The fix for this is complicated by "split blocks" - one logical block may be split into two (or more) pieces with each piece moved to a different new location. In this case we need to read all versions of each split (one from each side of the mirror), and figure out which combination of versions results in the correct checksum, and then repair the incorrect versions. This ensures that we supply the same redundancy whether you use device removal or not. For example, if a mirror has small silent errors on all of its children, we can still reconstruct the correct data, as long as those errors are at sufficiently-separated offsets (specifically, separated by the largest block size - default of 128KB, but up to 16MB). Porting notes: * A new indirect vdev check was moved from dsl_scan_needs_resilver_cb() to dsl_scan_needs_resilver(), which was added to ZoL as part of the sequential scrub work. * Passed NULL for zfs_ereport_post_checksum()'s zbookmark_phys_t parameter. The extra parameter is unique to ZoL. * When posting indirect checksum errors the ABD can be passed directly, zfs_ereport_post_checksum() is not yet ABD-aware in OpenZFS. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9290 OpenZFS-commit: https://github.com/openzfs/openzfs/pull/591 Closes #6900
2018-02-13 19:37:56 +00:00
vdev_t *vd = vdev_lookup_top(spa, svr->svr_vdev_id);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
ASSERT0(range_tree_space(svr->svr_allocd_segs));
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 17:36:03 +00:00
range_tree_t *allocs = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
for (uint64_t msi = 0; msi < vd->vdev_ms_count; msi++) {
metaslab_t *msp = vd->vdev_ms[msi];
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
ASSERT0(range_tree_space(allocs));
if (msp->ms_sm != NULL)
VERIFY0(space_map_load(msp->ms_sm, allocs, SM_ALLOC));
range_tree_vacate(allocs, range_tree_add, svr->svr_allocd_segs);
}
range_tree_destroy(allocs);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
iterate_through_spacemap_logs(spa, load_unflushed_svr_segs_cb, svr);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
/*
* Clear everything past what has been synced,
* because we have not allocated mappings for
* it yet.
*/
range_tree_clear(svr->svr_allocd_segs,
vdev_indirect_mapping_max_offset(vim),
vd->vdev_asize - vdev_indirect_mapping_max_offset(vim));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
zcb->zcb_removing_size += range_tree_space(svr->svr_allocd_segs);
range_tree_vacate(svr->svr_allocd_segs, claim_segment_cb, vd);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
spa_config_exit(spa, SCL_CONFIG, FTAG);
}
/* ARGSUSED */
static int
increment_indirect_mapping_cb(void *arg, const blkptr_t *bp, boolean_t bp_freed,
dmu_tx_t *tx)
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
{
zdb_cb_t *zcb = arg;
spa_t *spa = zcb->zcb_spa;
vdev_t *vd;
const dva_t *dva = &bp->blk_dva[0];
ASSERT(!bp_freed);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
ASSERT(!dump_opt['L']);
ASSERT3U(BP_GET_NDVAS(bp), ==, 1);
spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
vd = vdev_lookup_top(zcb->zcb_spa, DVA_GET_VDEV(dva));
ASSERT3P(vd, !=, NULL);
spa_config_exit(spa, SCL_VDEV, FTAG);
ASSERT(vd->vdev_indirect_config.vic_mapping_object != 0);
ASSERT3P(zcb->zcb_vd_obsolete_counts[vd->vdev_id], !=, NULL);
vdev_indirect_mapping_increment_obsolete_count(
vd->vdev_indirect_mapping,
DVA_GET_OFFSET(dva), DVA_GET_ASIZE(dva),
zcb->zcb_vd_obsolete_counts[vd->vdev_id]);
return (0);
}
static uint32_t *
zdb_load_obsolete_counts(vdev_t *vd)
{
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
spa_t *spa = vd->vdev_spa;
spa_condensing_indirect_phys_t *scip =
&spa->spa_condensing_indirect_phys;
uint64_t obsolete_sm_object;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
uint32_t *counts;
VERIFY0(vdev_obsolete_sm_object(vd, &obsolete_sm_object));
EQUIV(obsolete_sm_object != 0, vd->vdev_obsolete_sm != NULL);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
counts = vdev_indirect_mapping_load_obsolete_counts(vim);
if (vd->vdev_obsolete_sm != NULL) {
vdev_indirect_mapping_load_obsolete_spacemap(vim, counts,
vd->vdev_obsolete_sm);
}
if (scip->scip_vdev == vd->vdev_id &&
scip->scip_prev_obsolete_sm_object != 0) {
space_map_t *prev_obsolete_sm = NULL;
VERIFY0(space_map_open(&prev_obsolete_sm, spa->spa_meta_objset,
scip->scip_prev_obsolete_sm_object, 0, vd->vdev_asize, 0));
vdev_indirect_mapping_load_obsolete_spacemap(vim, counts,
prev_obsolete_sm);
space_map_close(prev_obsolete_sm);
}
return (counts);
}
static void
zdb_ddt_leak_init(spa_t *spa, zdb_cb_t *zcb)
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
ddt_bookmark_t ddb;
ddt_entry_t dde;
int error;
int p;
ASSERT(!dump_opt['L']);
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
bzero(&ddb, sizeof (ddb));
while ((error = ddt_walk(spa, &ddb, &dde)) == 0) {
blkptr_t blk;
ddt_phys_t *ddp = dde.dde_phys;
if (ddb.ddb_class == DDT_CLASS_UNIQUE)
return;
ASSERT(ddt_phys_total_refcnt(&dde) > 1);
for (p = 0; p < DDT_PHYS_TYPES; p++, ddp++) {
if (ddp->ddp_phys_birth == 0)
continue;
ddt_bp_create(ddb.ddb_checksum,
&dde.dde_key, ddp, &blk);
if (p == DDT_PHYS_DITTO) {
zdb_count_block(zcb, NULL, &blk, ZDB_OT_DITTO);
} else {
zcb->zcb_dedup_asize +=
BP_GET_ASIZE(&blk) * (ddp->ddp_refcnt - 1);
zcb->zcb_dedup_blocks++;
}
}
ddt_t *ddt = spa->spa_ddt[ddb.ddb_checksum];
ddt_enter(ddt);
VERIFY(ddt_lookup(ddt, &blk, B_TRUE) != NULL);
ddt_exit(ddt);
}
ASSERT(error == ENOENT);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
typedef struct checkpoint_sm_exclude_entry_arg {
vdev_t *cseea_vd;
uint64_t cseea_checkpoint_size;
} checkpoint_sm_exclude_entry_arg_t;
static int
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
checkpoint_sm_exclude_entry_cb(space_map_entry_t *sme, void *arg)
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
{
checkpoint_sm_exclude_entry_arg_t *cseea = arg;
vdev_t *vd = cseea->cseea_vd;
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
metaslab_t *ms = vd->vdev_ms[sme->sme_offset >> vd->vdev_ms_shift];
uint64_t end = sme->sme_offset + sme->sme_run;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
ASSERT(sme->sme_type == SM_FREE);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
/*
* Since the vdev_checkpoint_sm exists in the vdev level
* and the ms_sm space maps exist in the metaslab level,
* an entry in the checkpoint space map could theoretically
* cross the boundaries of the metaslab that it belongs.
*
* In reality, because of the way that we populate and
* manipulate the checkpoint's space maps currently,
* there shouldn't be any entries that cross metaslabs.
* Hence the assertion below.
*
* That said, there is no fundamental requirement that
* the checkpoint's space map entries should not cross
* metaslab boundaries. So if needed we could add code
* that handles metaslab-crossing segments in the future.
*/
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
VERIFY3U(sme->sme_offset, >=, ms->ms_start);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
VERIFY3U(end, <=, ms->ms_start + ms->ms_size);
/*
* By removing the entry from the allocated segments we
* also verify that the entry is there to begin with.
*/
mutex_enter(&ms->ms_lock);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
range_tree_remove(ms->ms_allocatable, sme->sme_offset, sme->sme_run);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
mutex_exit(&ms->ms_lock);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
cseea->cseea_checkpoint_size += sme->sme_run;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
return (0);
}
static void
zdb_leak_init_vdev_exclude_checkpoint(vdev_t *vd, zdb_cb_t *zcb)
{
spa_t *spa = vd->vdev_spa;
space_map_t *checkpoint_sm = NULL;
uint64_t checkpoint_sm_obj;
/*
* If there is no vdev_top_zap, we are in a pool whose
* version predates the pool checkpoint feature.
*/
if (vd->vdev_top_zap == 0)
return;
/*
* If there is no reference of the vdev_checkpoint_sm in
* the vdev_top_zap, then one of the following scenarios
* is true:
*
* 1] There is no checkpoint
* 2] There is a checkpoint, but no checkpointed blocks
* have been freed yet
* 3] The current vdev is indirect
*
* In these cases we return immediately.
*/
if (zap_contains(spa_meta_objset(spa), vd->vdev_top_zap,
VDEV_TOP_ZAP_POOL_CHECKPOINT_SM) != 0)
return;
VERIFY0(zap_lookup(spa_meta_objset(spa), vd->vdev_top_zap,
VDEV_TOP_ZAP_POOL_CHECKPOINT_SM, sizeof (uint64_t), 1,
&checkpoint_sm_obj));
checkpoint_sm_exclude_entry_arg_t cseea;
cseea.cseea_vd = vd;
cseea.cseea_checkpoint_size = 0;
VERIFY0(space_map_open(&checkpoint_sm, spa_meta_objset(spa),
checkpoint_sm_obj, 0, vd->vdev_asize, vd->vdev_ashift));
VERIFY0(space_map_iterate(checkpoint_sm,
Get rid of space_map_update() for ms_synced_length Initially, metaslabs and space maps used to be the same thing in ZFS. Later, we started differentiating them by referring to the space map as the on-disk state of the metaslab, making the metaslab a higher-level concept that is metadata that deals with space accounting. Today we've managed to split that code furthermore, with the space map being its own on-disk data structure used in areas of ZFS besides metaslabs (e.g. the vdev-wide space maps used for zpool checkpoint or vdev removal features). This patch refactors the space map code to further split the space map code from the metaslab code. It does so by getting rid of the idea that the space map can have a different in-core and on-disk length (sm_length vs smp_length) which is something that is only used for the metaslab code, and other consumers of space maps just have to deal with. Instead, this patch introduces changes that move the old in-core length of the metaslab's space map to the metaslab structure itself (see ms_synced_length field) while making the space map code only care about the actual space map's length on-disk. The result of this is that space map consumers no longer have to deal with syncing two different lengths for the same structure (e.g. space_map_update() goes away) while metaslab specific behavior stays within the metaslab code. Specifically, the ms_synced_length field keeps track of the amount of data metaslab_load() can read from the metaslab's space map while working concurrently with metaslab_sync() that may be appending to that same space map. As a side note, the patch also adds a few comments around the metaslab code documenting some assumptions and expected behavior. Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8328
2019-02-12 18:38:11 +00:00
space_map_length(checkpoint_sm),
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
checkpoint_sm_exclude_entry_cb, &cseea));
space_map_close(checkpoint_sm);
zcb->zcb_checkpoint_size += cseea.cseea_checkpoint_size;
}
static void
zdb_leak_init_exclude_checkpoint(spa_t *spa, zdb_cb_t *zcb)
{
ASSERT(!dump_opt['L']);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
vdev_t *rvd = spa->spa_root_vdev;
for (uint64_t c = 0; c < rvd->vdev_children; c++) {
ASSERT3U(c, ==, rvd->vdev_child[c]->vdev_id);
zdb_leak_init_vdev_exclude_checkpoint(rvd->vdev_child[c], zcb);
}
}
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
static int
count_unflushed_space_cb(spa_t *spa, space_map_entry_t *sme,
uint64_t txg, void *arg)
{
int64_t *ualloc_space = arg;
uint64_t offset = sme->sme_offset;
uint64_t vdev_id = sme->sme_vdev;
vdev_t *vd = vdev_lookup_top(spa, vdev_id);
if (!vdev_is_concrete(vd))
return (0);
metaslab_t *ms = vd->vdev_ms[offset >> vd->vdev_ms_shift];
ASSERT(sme->sme_type == SM_ALLOC || sme->sme_type == SM_FREE);
if (txg < metaslab_unflushed_txg(ms))
return (0);
if (sme->sme_type == SM_ALLOC)
*ualloc_space += sme->sme_run;
else
*ualloc_space -= sme->sme_run;
return (0);
}
static int64_t
get_unflushed_alloc_space(spa_t *spa)
{
if (dump_opt['L'])
return (0);
int64_t ualloc_space = 0;
iterate_through_spacemap_logs(spa, count_unflushed_space_cb,
&ualloc_space);
return (ualloc_space);
}
static int
load_unflushed_cb(spa_t *spa, space_map_entry_t *sme, uint64_t txg, void *arg)
{
maptype_t *uic_maptype = arg;
uint64_t offset = sme->sme_offset;
uint64_t size = sme->sme_run;
uint64_t vdev_id = sme->sme_vdev;
vdev_t *vd = vdev_lookup_top(spa, vdev_id);
/* skip indirect vdevs */
if (!vdev_is_concrete(vd))
return (0);
metaslab_t *ms = vd->vdev_ms[offset >> vd->vdev_ms_shift];
ASSERT(sme->sme_type == SM_ALLOC || sme->sme_type == SM_FREE);
ASSERT(*uic_maptype == SM_ALLOC || *uic_maptype == SM_FREE);
if (txg < metaslab_unflushed_txg(ms))
return (0);
if (*uic_maptype == sme->sme_type)
range_tree_add(ms->ms_allocatable, offset, size);
else
range_tree_remove(ms->ms_allocatable, offset, size);
return (0);
}
static void
load_unflushed_to_ms_allocatables(spa_t *spa, maptype_t maptype)
{
iterate_through_spacemap_logs(spa, load_unflushed_cb, &maptype);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
static void
load_concrete_ms_allocatable_trees(spa_t *spa, maptype_t maptype)
{
vdev_t *rvd = spa->spa_root_vdev;
for (uint64_t i = 0; i < rvd->vdev_children; i++) {
vdev_t *vd = rvd->vdev_child[i];
ASSERT3U(i, ==, vd->vdev_id);
if (vd->vdev_ops == &vdev_indirect_ops)
continue;
for (uint64_t m = 0; m < vd->vdev_ms_count; m++) {
metaslab_t *msp = vd->vdev_ms[m];
(void) fprintf(stderr,
"\rloading concrete vdev %llu, "
"metaslab %llu of %llu ...",
(longlong_t)vd->vdev_id,
(longlong_t)msp->ms_id,
(longlong_t)vd->vdev_ms_count);
mutex_enter(&msp->ms_lock);
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
range_tree_vacate(msp->ms_allocatable, NULL, NULL);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
/*
* We don't want to spend the CPU manipulating the
* size-ordered tree, so clear the range_tree ops.
*/
msp->ms_allocatable->rt_ops = NULL;
if (msp->ms_sm != NULL) {
VERIFY0(space_map_load(msp->ms_sm,
msp->ms_allocatable, maptype));
}
if (!msp->ms_loaded)
msp->ms_loaded = B_TRUE;
mutex_exit(&msp->ms_lock);
}
}
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
load_unflushed_to_ms_allocatables(spa, maptype);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
}
/*
* vm_idxp is an in-out parameter which (for indirect vdevs) is the
* index in vim_entries that has the first entry in this metaslab.
* On return, it will be set to the first entry after this metaslab.
*/
static void
load_indirect_ms_allocatable_tree(vdev_t *vd, metaslab_t *msp,
uint64_t *vim_idxp)
{
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
mutex_enter(&msp->ms_lock);
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
range_tree_vacate(msp->ms_allocatable, NULL, NULL);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
/*
* We don't want to spend the CPU manipulating the
* size-ordered tree, so clear the range_tree ops.
*/
msp->ms_allocatable->rt_ops = NULL;
for (; *vim_idxp < vdev_indirect_mapping_num_entries(vim);
(*vim_idxp)++) {
vdev_indirect_mapping_entry_phys_t *vimep =
&vim->vim_entries[*vim_idxp];
uint64_t ent_offset = DVA_MAPPING_GET_SRC_OFFSET(vimep);
uint64_t ent_len = DVA_GET_ASIZE(&vimep->vimep_dst);
ASSERT3U(ent_offset, >=, msp->ms_start);
if (ent_offset >= msp->ms_start + msp->ms_size)
break;
/*
* Mappings do not cross metaslab boundaries,
* because we create them by walking the metaslabs.
*/
ASSERT3U(ent_offset + ent_len, <=,
msp->ms_start + msp->ms_size);
range_tree_add(msp->ms_allocatable, ent_offset, ent_len);
}
if (!msp->ms_loaded)
msp->ms_loaded = B_TRUE;
mutex_exit(&msp->ms_lock);
}
static void
zdb_leak_init_prepare_indirect_vdevs(spa_t *spa, zdb_cb_t *zcb)
{
ASSERT(!dump_opt['L']);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
vdev_t *rvd = spa->spa_root_vdev;
for (uint64_t c = 0; c < rvd->vdev_children; c++) {
vdev_t *vd = rvd->vdev_child[c];
ASSERT3U(c, ==, vd->vdev_id);
if (vd->vdev_ops != &vdev_indirect_ops)
continue;
/*
* Note: we don't check for mapping leaks on
* removing vdevs because their ms_allocatable's
* are used to look for leaks in allocated space.
*/
zcb->zcb_vd_obsolete_counts[c] = zdb_load_obsolete_counts(vd);
/*
* Normally, indirect vdevs don't have any
* metaslabs. We want to set them up for
* zio_claim().
*/
Set aside a metaslab for ZIL blocks Mixing ZIL and normal allocations has several problems: 1. The ZIL allocations are allocated, written to disk, and then a few seconds later freed. This leaves behind holes (free segments) where the ZIL blocks used to be, which increases fragmentation, which negatively impacts performance. 2. When under moderate load, ZIL allocations are of 128KB. If the pool is fairly fragmented, there may not be many free chunks of that size. This causes ZFS to load more metaslabs to locate free segments of 128KB or more. The loading happens synchronously (from zil_commit()), and can take around a second even if the metaslab's spacemap is cached in the ARC. All concurrent synchronous operations on this filesystem must wait while the metaslab is loading. This can cause a significant performance impact. 3. If the pool is very fragmented, there may be zero free chunks of 128KB or more. In this case, the ZIL falls back to txg_wait_synced(), which has an enormous performance impact. These problems can be eliminated by using a dedicated log device ("slog"), even one with the same performance characteristics as the normal devices. This change sets aside one metaslab from each top-level vdev that is preferentially used for ZIL allocations (vdev_log_mg, spa_embedded_log_class). From an allocation perspective, this is similar to having a dedicated log device, and it eliminates the above-mentioned performance problems. Log (ZIL) blocks can be allocated from the following locations. Each one is tried in order until the allocation succeeds: 1. dedicated log vdevs, aka "slog" (spa_log_class) 2. embedded slog metaslabs (spa_embedded_log_class) 3. other metaslabs in normal vdevs (spa_normal_class) The space required for the embedded slog metaslabs is usually between 0.5% and 1.0% of the pool, and comes out of the existing 3.2% of "slop" space that is not available for user data. On an all-ssd system with 4TB storage, 87% fragmentation, 60% capacity, and recordsize=8k, testing shows a ~50% performance increase on random 8k sync writes. On even more fragmented systems (which hit problem #3 above and call txg_wait_synced()), the performance improvement can be arbitrarily large (>100x). Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Don Brady <don.brady@delphix.com> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11389
2021-01-21 23:12:54 +00:00
vdev_metaslab_group_create(vd);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
VERIFY0(vdev_metaslab_init(vd, 0));
vdev_indirect_mapping_t *vim __maybe_unused =
vd->vdev_indirect_mapping;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
uint64_t vim_idx = 0;
for (uint64_t m = 0; m < vd->vdev_ms_count; m++) {
(void) fprintf(stderr,
"\rloading indirect vdev %llu, "
"metaslab %llu of %llu ...",
(longlong_t)vd->vdev_id,
(longlong_t)vd->vdev_ms[m]->ms_id,
(longlong_t)vd->vdev_ms_count);
load_indirect_ms_allocatable_tree(vd, vd->vdev_ms[m],
&vim_idx);
}
ASSERT3U(vim_idx, ==, vdev_indirect_mapping_num_entries(vim));
}
}
static void
zdb_leak_init(spa_t *spa, zdb_cb_t *zcb)
{
zcb->zcb_spa = spa;
if (dump_opt['L'])
return;
dsl_pool_t *dp = spa->spa_dsl_pool;
vdev_t *rvd = spa->spa_root_vdev;
/*
* We are going to be changing the meaning of the metaslab's
* ms_allocatable. Ensure that the allocator doesn't try to
* use the tree.
*/
spa->spa_normal_class->mc_ops = &zdb_metaslab_ops;
spa->spa_log_class->mc_ops = &zdb_metaslab_ops;
Set aside a metaslab for ZIL blocks Mixing ZIL and normal allocations has several problems: 1. The ZIL allocations are allocated, written to disk, and then a few seconds later freed. This leaves behind holes (free segments) where the ZIL blocks used to be, which increases fragmentation, which negatively impacts performance. 2. When under moderate load, ZIL allocations are of 128KB. If the pool is fairly fragmented, there may not be many free chunks of that size. This causes ZFS to load more metaslabs to locate free segments of 128KB or more. The loading happens synchronously (from zil_commit()), and can take around a second even if the metaslab's spacemap is cached in the ARC. All concurrent synchronous operations on this filesystem must wait while the metaslab is loading. This can cause a significant performance impact. 3. If the pool is very fragmented, there may be zero free chunks of 128KB or more. In this case, the ZIL falls back to txg_wait_synced(), which has an enormous performance impact. These problems can be eliminated by using a dedicated log device ("slog"), even one with the same performance characteristics as the normal devices. This change sets aside one metaslab from each top-level vdev that is preferentially used for ZIL allocations (vdev_log_mg, spa_embedded_log_class). From an allocation perspective, this is similar to having a dedicated log device, and it eliminates the above-mentioned performance problems. Log (ZIL) blocks can be allocated from the following locations. Each one is tried in order until the allocation succeeds: 1. dedicated log vdevs, aka "slog" (spa_log_class) 2. embedded slog metaslabs (spa_embedded_log_class) 3. other metaslabs in normal vdevs (spa_normal_class) The space required for the embedded slog metaslabs is usually between 0.5% and 1.0% of the pool, and comes out of the existing 3.2% of "slop" space that is not available for user data. On an all-ssd system with 4TB storage, 87% fragmentation, 60% capacity, and recordsize=8k, testing shows a ~50% performance increase on random 8k sync writes. On even more fragmented systems (which hit problem #3 above and call txg_wait_synced()), the performance improvement can be arbitrarily large (>100x). Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Don Brady <don.brady@delphix.com> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11389
2021-01-21 23:12:54 +00:00
spa->spa_embedded_log_class->mc_ops = &zdb_metaslab_ops;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
zcb->zcb_vd_obsolete_counts =
umem_zalloc(rvd->vdev_children * sizeof (uint32_t *),
UMEM_NOFAIL);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* For leak detection, we overload the ms_allocatable trees
* to contain allocated segments instead of free segments.
* As a result, we can't use the normal metaslab_load/unload
* interfaces.
*/
zdb_leak_init_prepare_indirect_vdevs(spa, zcb);
load_concrete_ms_allocatable_trees(spa, SM_ALLOC);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
/*
* On load_concrete_ms_allocatable_trees() we loaded all the
* allocated entries from the ms_sm to the ms_allocatable for
* each metaslab. If the pool has a checkpoint or is in the
* middle of discarding a checkpoint, some of these blocks
* may have been freed but their ms_sm may not have been
* updated because they are referenced by the checkpoint. In
* order to avoid false-positives during leak-detection, we
* go through the vdev's checkpoint space map and exclude all
* its entries from their relevant ms_allocatable.
*
* We also aggregate the space held by the checkpoint and add
* it to zcb_checkpoint_size.
*
* Note that at this point we are also verifying that all the
* entries on the checkpoint_sm are marked as allocated in
* the ms_sm of their relevant metaslab.
* [see comment in checkpoint_sm_exclude_entry_cb()]
*/
zdb_leak_init_exclude_checkpoint(spa, zcb);
ASSERT3U(zcb->zcb_checkpoint_size, ==, spa_get_checkpoint_space(spa));
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
/* for cleaner progress output */
(void) fprintf(stderr, "\n");
if (bpobj_is_open(&dp->dp_obsolete_bpobj)) {
ASSERT(spa_feature_is_enabled(spa,
SPA_FEATURE_DEVICE_REMOVAL));
(void) bpobj_iterate_nofree(&dp->dp_obsolete_bpobj,
increment_indirect_mapping_cb, zcb, NULL);
}
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
zdb_ddt_leak_init(spa, zcb);
spa_config_exit(spa, SCL_CONFIG, FTAG);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
static boolean_t
zdb_check_for_obsolete_leaks(vdev_t *vd, zdb_cb_t *zcb)
{
boolean_t leaks = B_FALSE;
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
uint64_t total_leaked = 0;
boolean_t are_precise = B_FALSE;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
ASSERT(vim != NULL);
for (uint64_t i = 0; i < vdev_indirect_mapping_num_entries(vim); i++) {
vdev_indirect_mapping_entry_phys_t *vimep =
&vim->vim_entries[i];
uint64_t obsolete_bytes = 0;
uint64_t offset = DVA_MAPPING_GET_SRC_OFFSET(vimep);
metaslab_t *msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];
/*
* This is not very efficient but it's easy to
* verify correctness.
*/
for (uint64_t inner_offset = 0;
inner_offset < DVA_GET_ASIZE(&vimep->vimep_dst);
inner_offset += 1 << vd->vdev_ashift) {
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
if (range_tree_contains(msp->ms_allocatable,
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
offset + inner_offset, 1 << vd->vdev_ashift)) {
obsolete_bytes += 1 << vd->vdev_ashift;
}
}
int64_t bytes_leaked = obsolete_bytes -
zcb->zcb_vd_obsolete_counts[vd->vdev_id][i];
ASSERT3U(DVA_GET_ASIZE(&vimep->vimep_dst), >=,
zcb->zcb_vd_obsolete_counts[vd->vdev_id][i]);
VERIFY0(vdev_obsolete_counts_are_precise(vd, &are_precise));
if (bytes_leaked != 0 && (are_precise || dump_opt['d'] >= 5)) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
(void) printf("obsolete indirect mapping count "
"mismatch on %llu:%llx:%llx : %llx bytes leaked\n",
(u_longlong_t)vd->vdev_id,
(u_longlong_t)DVA_MAPPING_GET_SRC_OFFSET(vimep),
(u_longlong_t)DVA_GET_ASIZE(&vimep->vimep_dst),
(u_longlong_t)bytes_leaked);
}
total_leaked += ABS(bytes_leaked);
}
VERIFY0(vdev_obsolete_counts_are_precise(vd, &are_precise));
if (!are_precise && total_leaked > 0) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
int pct_leaked = total_leaked * 100 /
vdev_indirect_mapping_bytes_mapped(vim);
(void) printf("cannot verify obsolete indirect mapping "
"counts of vdev %llu because precise feature was not "
"enabled when it was removed: %d%% (%llx bytes) of mapping"
"unreferenced\n",
(u_longlong_t)vd->vdev_id, pct_leaked,
(u_longlong_t)total_leaked);
} else if (total_leaked > 0) {
(void) printf("obsolete indirect mapping count mismatch "
"for vdev %llu -- %llx total bytes mismatched\n",
(u_longlong_t)vd->vdev_id,
(u_longlong_t)total_leaked);
leaks |= B_TRUE;
}
vdev_indirect_mapping_free_obsolete_counts(vim,
zcb->zcb_vd_obsolete_counts[vd->vdev_id]);
zcb->zcb_vd_obsolete_counts[vd->vdev_id] = NULL;
return (leaks);
}
static boolean_t
zdb_leak_fini(spa_t *spa, zdb_cb_t *zcb)
{
if (dump_opt['L'])
return (B_FALSE);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
boolean_t leaks = B_FALSE;
vdev_t *rvd = spa->spa_root_vdev;
for (unsigned c = 0; c < rvd->vdev_children; c++) {
vdev_t *vd = rvd->vdev_child[c];
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
if (zcb->zcb_vd_obsolete_counts[c] != NULL) {
leaks |= zdb_check_for_obsolete_leaks(vd, zcb);
}
for (uint64_t m = 0; m < vd->vdev_ms_count; m++) {
metaslab_t *msp = vd->vdev_ms[m];
Set aside a metaslab for ZIL blocks Mixing ZIL and normal allocations has several problems: 1. The ZIL allocations are allocated, written to disk, and then a few seconds later freed. This leaves behind holes (free segments) where the ZIL blocks used to be, which increases fragmentation, which negatively impacts performance. 2. When under moderate load, ZIL allocations are of 128KB. If the pool is fairly fragmented, there may not be many free chunks of that size. This causes ZFS to load more metaslabs to locate free segments of 128KB or more. The loading happens synchronously (from zil_commit()), and can take around a second even if the metaslab's spacemap is cached in the ARC. All concurrent synchronous operations on this filesystem must wait while the metaslab is loading. This can cause a significant performance impact. 3. If the pool is very fragmented, there may be zero free chunks of 128KB or more. In this case, the ZIL falls back to txg_wait_synced(), which has an enormous performance impact. These problems can be eliminated by using a dedicated log device ("slog"), even one with the same performance characteristics as the normal devices. This change sets aside one metaslab from each top-level vdev that is preferentially used for ZIL allocations (vdev_log_mg, spa_embedded_log_class). From an allocation perspective, this is similar to having a dedicated log device, and it eliminates the above-mentioned performance problems. Log (ZIL) blocks can be allocated from the following locations. Each one is tried in order until the allocation succeeds: 1. dedicated log vdevs, aka "slog" (spa_log_class) 2. embedded slog metaslabs (spa_embedded_log_class) 3. other metaslabs in normal vdevs (spa_normal_class) The space required for the embedded slog metaslabs is usually between 0.5% and 1.0% of the pool, and comes out of the existing 3.2% of "slop" space that is not available for user data. On an all-ssd system with 4TB storage, 87% fragmentation, 60% capacity, and recordsize=8k, testing shows a ~50% performance increase on random 8k sync writes. On even more fragmented systems (which hit problem #3 above and call txg_wait_synced()), the performance improvement can be arbitrarily large (>100x). Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Don Brady <don.brady@delphix.com> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11389
2021-01-21 23:12:54 +00:00
ASSERT3P(msp->ms_group, ==, (msp->ms_group->mg_class ==
spa_embedded_log_class(spa)) ?
vd->vdev_log_mg : vd->vdev_mg);
/*
* ms_allocatable has been overloaded
* to contain allocated segments. Now that
* we finished traversing all blocks, any
* block that remains in the ms_allocatable
* represents an allocated block that we
* did not claim during the traversal.
* Claimed blocks would have been removed
* from the ms_allocatable. For indirect
* vdevs, space remaining in the tree
* represents parts of the mapping that are
* not referenced, which is not a bug.
*/
if (vd->vdev_ops == &vdev_indirect_ops) {
range_tree_vacate(msp->ms_allocatable,
NULL, NULL);
} else {
range_tree_vacate(msp->ms_allocatable,
zdb_leak, vd);
}
if (msp->ms_loaded) {
msp->ms_loaded = B_FALSE;
}
}
}
umem_free(zcb->zcb_vd_obsolete_counts,
rvd->vdev_children * sizeof (uint32_t *));
zcb->zcb_vd_obsolete_counts = NULL;
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
return (leaks);
}
/* ARGSUSED */
static int
count_block_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
zdb_cb_t *zcb = arg;
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
if (dump_opt['b'] >= 5) {
char blkbuf[BP_SPRINTF_LEN];
snprintf_blkptr(blkbuf, sizeof (blkbuf), bp);
(void) printf("[%s] %s\n",
"deferred free", blkbuf);
}
zdb_count_block(zcb, NULL, bp, ZDB_OT_DEFERRED);
return (0);
}
/*
* Iterate over livelists which have been destroyed by the user but
* are still present in the MOS, waiting to be freed
*/
static void
iterate_deleted_livelists(spa_t *spa, ll_iter_t func, void *arg)
{
objset_t *mos = spa->spa_meta_objset;
uint64_t zap_obj;
int err = zap_lookup(mos, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_DELETED_CLONES, sizeof (uint64_t), 1, &zap_obj);
if (err == ENOENT)
return;
ASSERT0(err);
zap_cursor_t zc;
zap_attribute_t attr;
dsl_deadlist_t ll;
/* NULL out os prior to dsl_deadlist_open in case it's garbage */
ll.dl_os = NULL;
for (zap_cursor_init(&zc, mos, zap_obj);
zap_cursor_retrieve(&zc, &attr) == 0;
(void) zap_cursor_advance(&zc)) {
dsl_deadlist_open(&ll, mos, attr.za_first_integer);
func(&ll, arg);
dsl_deadlist_close(&ll);
}
zap_cursor_fini(&zc);
}
static int
bpobj_count_block_cb(void *arg, const blkptr_t *bp, boolean_t bp_freed,
dmu_tx_t *tx)
{
ASSERT(!bp_freed);
return (count_block_cb(arg, bp, tx));
}
static int
livelist_entry_count_blocks_cb(void *args, dsl_deadlist_entry_t *dle)
{
zdb_cb_t *zbc = args;
bplist_t blks;
bplist_create(&blks);
/* determine which blocks have been alloc'd but not freed */
VERIFY0(dsl_process_sub_livelist(&dle->dle_bpobj, &blks, NULL, NULL));
/* count those blocks */
(void) bplist_iterate(&blks, count_block_cb, zbc, NULL);
bplist_destroy(&blks);
return (0);
}
static void
livelist_count_blocks(dsl_deadlist_t *ll, void *arg)
{
dsl_deadlist_iterate(ll, livelist_entry_count_blocks_cb, arg);
}
/*
* Count the blocks in the livelists that have been destroyed by the user
* but haven't yet been freed.
*/
static void
deleted_livelists_count_blocks(spa_t *spa, zdb_cb_t *zbc)
{
iterate_deleted_livelists(spa, livelist_count_blocks, zbc);
}
static void
dump_livelist_cb(dsl_deadlist_t *ll, void *arg)
{
ASSERT3P(arg, ==, NULL);
global_feature_count[SPA_FEATURE_LIVELIST]++;
dump_blkptr_list(ll, "Deleted Livelist");
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
dsl_deadlist_iterate(ll, sublivelist_verify_lightweight, NULL);
}
/*
* Print out, register object references to, and increment feature counts for
* livelists that have been destroyed by the user but haven't yet been freed.
*/
static void
deleted_livelists_dump_mos(spa_t *spa)
{
uint64_t zap_obj;
objset_t *mos = spa->spa_meta_objset;
int err = zap_lookup(mos, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_DELETED_CLONES, sizeof (uint64_t), 1, &zap_obj);
if (err == ENOENT)
return;
mos_obj_refd(zap_obj);
iterate_deleted_livelists(spa, dump_livelist_cb, NULL);
}
2008-11-20 20:01:55 +00:00
static int
dump_block_stats(spa_t *spa)
{
zdb_cb_t zcb;
2008-11-20 20:01:55 +00:00
zdb_blkstats_t *zb, *tzb;
uint64_t norm_alloc, norm_space, total_alloc, total_found;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
int flags = TRAVERSE_PRE | TRAVERSE_PREFETCH_METADATA |
TRAVERSE_NO_DECRYPT | TRAVERSE_HARD;
boolean_t leaks = B_FALSE;
int e, c, err;
bp_embedded_type_t i;
2008-11-20 20:01:55 +00:00
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
bzero(&zcb, sizeof (zcb));
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
(void) printf("\nTraversing all blocks %s%s%s%s%s...\n\n",
(dump_opt['c'] || !dump_opt['L']) ? "to verify " : "",
(dump_opt['c'] == 1) ? "metadata " : "",
dump_opt['c'] ? "checksums " : "",
(dump_opt['c'] && !dump_opt['L']) ? "and verify " : "",
!dump_opt['L'] ? "nothing leaked " : "");
2008-11-20 20:01:55 +00:00
/*
* When leak detection is enabled we load all space maps as SM_ALLOC
* maps, then traverse the pool claiming each block we discover. If
* the pool is perfectly consistent, the segment trees will be empty
* when we're done. Anything left over is a leak; any block we can't
* claim (because it's not part of any space map) is a double
* allocation, reference to a freed block, or an unclaimed log block.
*
* When leak detection is disabled (-L option) we still traverse the
* pool claiming each block we discover, but we skip opening any space
* maps.
2008-11-20 20:01:55 +00:00
*/
bzero(&zcb, sizeof (zdb_cb_t));
zdb_leak_init(spa, &zcb);
2008-11-20 20:01:55 +00:00
/*
* If there's a deferred-free bplist, process that first.
*/
(void) bpobj_iterate_nofree(&spa->spa_deferred_bpobj,
bpobj_count_block_cb, &zcb, NULL);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
if (spa_version(spa) >= SPA_VERSION_DEADLISTS) {
(void) bpobj_iterate_nofree(&spa->spa_dsl_pool->dp_free_bpobj,
bpobj_count_block_cb, &zcb, NULL);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
zdb_claim_removing(spa, &zcb);
if (spa_feature_is_active(spa, SPA_FEATURE_ASYNC_DESTROY)) {
VERIFY3U(0, ==, bptree_iterate(spa->spa_meta_objset,
spa->spa_dsl_pool->dp_bptree_obj, B_FALSE, count_block_cb,
&zcb, NULL));
}
2008-11-20 20:01:55 +00:00
deleted_livelists_count_blocks(spa, &zcb);
if (dump_opt['c'] > 1)
flags |= TRAVERSE_PREFETCH_DATA;
2008-11-20 20:01:55 +00:00
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
zcb.zcb_totalasize = metaslab_class_get_alloc(spa_normal_class(spa));
zcb.zcb_totalasize += metaslab_class_get_alloc(spa_special_class(spa));
zcb.zcb_totalasize += metaslab_class_get_alloc(spa_dedup_class(spa));
Set aside a metaslab for ZIL blocks Mixing ZIL and normal allocations has several problems: 1. The ZIL allocations are allocated, written to disk, and then a few seconds later freed. This leaves behind holes (free segments) where the ZIL blocks used to be, which increases fragmentation, which negatively impacts performance. 2. When under moderate load, ZIL allocations are of 128KB. If the pool is fairly fragmented, there may not be many free chunks of that size. This causes ZFS to load more metaslabs to locate free segments of 128KB or more. The loading happens synchronously (from zil_commit()), and can take around a second even if the metaslab's spacemap is cached in the ARC. All concurrent synchronous operations on this filesystem must wait while the metaslab is loading. This can cause a significant performance impact. 3. If the pool is very fragmented, there may be zero free chunks of 128KB or more. In this case, the ZIL falls back to txg_wait_synced(), which has an enormous performance impact. These problems can be eliminated by using a dedicated log device ("slog"), even one with the same performance characteristics as the normal devices. This change sets aside one metaslab from each top-level vdev that is preferentially used for ZIL allocations (vdev_log_mg, spa_embedded_log_class). From an allocation perspective, this is similar to having a dedicated log device, and it eliminates the above-mentioned performance problems. Log (ZIL) blocks can be allocated from the following locations. Each one is tried in order until the allocation succeeds: 1. dedicated log vdevs, aka "slog" (spa_log_class) 2. embedded slog metaslabs (spa_embedded_log_class) 3. other metaslabs in normal vdevs (spa_normal_class) The space required for the embedded slog metaslabs is usually between 0.5% and 1.0% of the pool, and comes out of the existing 3.2% of "slop" space that is not available for user data. On an all-ssd system with 4TB storage, 87% fragmentation, 60% capacity, and recordsize=8k, testing shows a ~50% performance increase on random 8k sync writes. On even more fragmented systems (which hit problem #3 above and call txg_wait_synced()), the performance improvement can be arbitrarily large (>100x). Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Don Brady <don.brady@delphix.com> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11389
2021-01-21 23:12:54 +00:00
zcb.zcb_totalasize +=
metaslab_class_get_alloc(spa_embedded_log_class(spa));
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
zcb.zcb_start = zcb.zcb_lastprint = gethrtime();
err = traverse_pool(spa, 0, flags, zdb_blkptr_cb, &zcb);
2008-11-20 20:01:55 +00:00
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
/*
* If we've traversed the data blocks then we need to wait for those
* I/Os to complete. We leverage "The Godfather" zio to wait on
* all async I/Os to complete.
*/
if (dump_opt['c']) {
for (c = 0; c < max_ncpus; c++) {
(void) zio_wait(spa->spa_async_zio_root[c]);
spa->spa_async_zio_root[c] = zio_root(spa, NULL, NULL,
ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE |
ZIO_FLAG_GODFATHER);
}
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
}
ASSERT0(spa->spa_load_verify_bytes);
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
/*
* Done after zio_wait() since zcb_haderrors is modified in
* zdb_blkptr_done()
*/
zcb.zcb_haderrors |= err;
if (zcb.zcb_haderrors) {
2008-11-20 20:01:55 +00:00
(void) printf("\nError counts:\n\n");
(void) printf("\t%5s %s\n", "errno", "count");
for (e = 0; e < 256; e++) {
2008-11-20 20:01:55 +00:00
if (zcb.zcb_errors[e] != 0) {
(void) printf("\t%5d %llu\n",
e, (u_longlong_t)zcb.zcb_errors[e]);
}
}
}
/*
* Report any leaked segments.
*/
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
leaks |= zdb_leak_fini(spa, &zcb);
2008-11-20 20:01:55 +00:00
tzb = &zcb.zcb_type[ZB_TOTAL][ZDB_OT_TOTAL];
2008-11-20 20:01:55 +00:00
norm_alloc = metaslab_class_get_alloc(spa_normal_class(spa));
norm_space = metaslab_class_get_space(spa_normal_class(spa));
2008-11-20 20:01:55 +00:00
total_alloc = norm_alloc +
metaslab_class_get_alloc(spa_log_class(spa)) +
Set aside a metaslab for ZIL blocks Mixing ZIL and normal allocations has several problems: 1. The ZIL allocations are allocated, written to disk, and then a few seconds later freed. This leaves behind holes (free segments) where the ZIL blocks used to be, which increases fragmentation, which negatively impacts performance. 2. When under moderate load, ZIL allocations are of 128KB. If the pool is fairly fragmented, there may not be many free chunks of that size. This causes ZFS to load more metaslabs to locate free segments of 128KB or more. The loading happens synchronously (from zil_commit()), and can take around a second even if the metaslab's spacemap is cached in the ARC. All concurrent synchronous operations on this filesystem must wait while the metaslab is loading. This can cause a significant performance impact. 3. If the pool is very fragmented, there may be zero free chunks of 128KB or more. In this case, the ZIL falls back to txg_wait_synced(), which has an enormous performance impact. These problems can be eliminated by using a dedicated log device ("slog"), even one with the same performance characteristics as the normal devices. This change sets aside one metaslab from each top-level vdev that is preferentially used for ZIL allocations (vdev_log_mg, spa_embedded_log_class). From an allocation perspective, this is similar to having a dedicated log device, and it eliminates the above-mentioned performance problems. Log (ZIL) blocks can be allocated from the following locations. Each one is tried in order until the allocation succeeds: 1. dedicated log vdevs, aka "slog" (spa_log_class) 2. embedded slog metaslabs (spa_embedded_log_class) 3. other metaslabs in normal vdevs (spa_normal_class) The space required for the embedded slog metaslabs is usually between 0.5% and 1.0% of the pool, and comes out of the existing 3.2% of "slop" space that is not available for user data. On an all-ssd system with 4TB storage, 87% fragmentation, 60% capacity, and recordsize=8k, testing shows a ~50% performance increase on random 8k sync writes. On even more fragmented systems (which hit problem #3 above and call txg_wait_synced()), the performance improvement can be arbitrarily large (>100x). Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Don Brady <don.brady@delphix.com> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11389
2021-01-21 23:12:54 +00:00
metaslab_class_get_alloc(spa_embedded_log_class(spa)) +
metaslab_class_get_alloc(spa_special_class(spa)) +
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
metaslab_class_get_alloc(spa_dedup_class(spa)) +
get_unflushed_alloc_space(spa);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
total_found = tzb->zb_asize - zcb.zcb_dedup_asize +
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
zcb.zcb_removing_size + zcb.zcb_checkpoint_size;
2008-11-20 20:01:55 +00:00
if (total_found == total_alloc && !dump_opt['L']) {
(void) printf("\n\tNo leaks (block sum matches space"
" maps exactly)\n");
} else if (!dump_opt['L']) {
2008-11-20 20:01:55 +00:00
(void) printf("block traversal size %llu != alloc %llu "
2009-01-15 21:59:39 +00:00
"(%s %lld)\n",
(u_longlong_t)total_found,
(u_longlong_t)total_alloc,
2009-01-15 21:59:39 +00:00
(dump_opt['L']) ? "unreachable" : "leaked",
(longlong_t)(total_alloc - total_found));
leaks = B_TRUE;
2008-11-20 20:01:55 +00:00
}
if (tzb->zb_count == 0)
return (2);
(void) printf("\n");
(void) printf("\t%-16s %14llu\n", "bp count:",
2008-11-20 20:01:55 +00:00
(u_longlong_t)tzb->zb_count);
(void) printf("\t%-16s %14llu\n", "ganged count:",
(longlong_t)tzb->zb_gangs);
(void) printf("\t%-16s %14llu avg: %6llu\n", "bp logical:",
2008-11-20 20:01:55 +00:00
(u_longlong_t)tzb->zb_lsize,
(u_longlong_t)(tzb->zb_lsize / tzb->zb_count));
(void) printf("\t%-16s %14llu avg: %6llu compression: %6.2f\n",
"bp physical:", (u_longlong_t)tzb->zb_psize,
2008-11-20 20:01:55 +00:00
(u_longlong_t)(tzb->zb_psize / tzb->zb_count),
(double)tzb->zb_lsize / tzb->zb_psize);
(void) printf("\t%-16s %14llu avg: %6llu compression: %6.2f\n",
"bp allocated:", (u_longlong_t)tzb->zb_asize,
2008-11-20 20:01:55 +00:00
(u_longlong_t)(tzb->zb_asize / tzb->zb_count),
(double)tzb->zb_lsize / tzb->zb_asize);
(void) printf("\t%-16s %14llu ref>1: %6llu deduplication: %6.2f\n",
"bp deduped:", (u_longlong_t)zcb.zcb_dedup_asize,
(u_longlong_t)zcb.zcb_dedup_blocks,
(double)zcb.zcb_dedup_asize / tzb->zb_asize + 1.0);
(void) printf("\t%-16s %14llu used: %5.2f%%\n", "Normal class:",
(u_longlong_t)norm_alloc, 100.0 * norm_alloc / norm_space);
2008-11-20 20:01:55 +00:00
if (spa_special_class(spa)->mc_allocator[0].mca_rotor != NULL) {
uint64_t alloc = metaslab_class_get_alloc(
spa_special_class(spa));
uint64_t space = metaslab_class_get_space(
spa_special_class(spa));
(void) printf("\t%-16s %14llu used: %5.2f%%\n",
"Special class", (u_longlong_t)alloc,
100.0 * alloc / space);
}
if (spa_dedup_class(spa)->mc_allocator[0].mca_rotor != NULL) {
uint64_t alloc = metaslab_class_get_alloc(
spa_dedup_class(spa));
uint64_t space = metaslab_class_get_space(
spa_dedup_class(spa));
(void) printf("\t%-16s %14llu used: %5.2f%%\n",
"Dedup class", (u_longlong_t)alloc,
100.0 * alloc / space);
}
Set aside a metaslab for ZIL blocks Mixing ZIL and normal allocations has several problems: 1. The ZIL allocations are allocated, written to disk, and then a few seconds later freed. This leaves behind holes (free segments) where the ZIL blocks used to be, which increases fragmentation, which negatively impacts performance. 2. When under moderate load, ZIL allocations are of 128KB. If the pool is fairly fragmented, there may not be many free chunks of that size. This causes ZFS to load more metaslabs to locate free segments of 128KB or more. The loading happens synchronously (from zil_commit()), and can take around a second even if the metaslab's spacemap is cached in the ARC. All concurrent synchronous operations on this filesystem must wait while the metaslab is loading. This can cause a significant performance impact. 3. If the pool is very fragmented, there may be zero free chunks of 128KB or more. In this case, the ZIL falls back to txg_wait_synced(), which has an enormous performance impact. These problems can be eliminated by using a dedicated log device ("slog"), even one with the same performance characteristics as the normal devices. This change sets aside one metaslab from each top-level vdev that is preferentially used for ZIL allocations (vdev_log_mg, spa_embedded_log_class). From an allocation perspective, this is similar to having a dedicated log device, and it eliminates the above-mentioned performance problems. Log (ZIL) blocks can be allocated from the following locations. Each one is tried in order until the allocation succeeds: 1. dedicated log vdevs, aka "slog" (spa_log_class) 2. embedded slog metaslabs (spa_embedded_log_class) 3. other metaslabs in normal vdevs (spa_normal_class) The space required for the embedded slog metaslabs is usually between 0.5% and 1.0% of the pool, and comes out of the existing 3.2% of "slop" space that is not available for user data. On an all-ssd system with 4TB storage, 87% fragmentation, 60% capacity, and recordsize=8k, testing shows a ~50% performance increase on random 8k sync writes. On even more fragmented systems (which hit problem #3 above and call txg_wait_synced()), the performance improvement can be arbitrarily large (>100x). Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Don Brady <don.brady@delphix.com> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #11389
2021-01-21 23:12:54 +00:00
if (spa_embedded_log_class(spa)->mc_allocator[0].mca_rotor != NULL) {
uint64_t alloc = metaslab_class_get_alloc(
spa_embedded_log_class(spa));
uint64_t space = metaslab_class_get_space(
spa_embedded_log_class(spa));
(void) printf("\t%-16s %14llu used: %5.2f%%\n",
"Embedded log class", (u_longlong_t)alloc,
100.0 * alloc / space);
}
for (i = 0; i < NUM_BP_EMBEDDED_TYPES; i++) {
if (zcb.zcb_embedded_blocks[i] == 0)
continue;
(void) printf("\n");
(void) printf("\tadditional, non-pointer bps of type %u: "
"%10llu\n",
i, (u_longlong_t)zcb.zcb_embedded_blocks[i]);
if (dump_opt['b'] >= 3) {
(void) printf("\t number of (compressed) bytes: "
"number of bps\n");
dump_histogram(zcb.zcb_embedded_histogram[i],
sizeof (zcb.zcb_embedded_histogram[i]) /
sizeof (zcb.zcb_embedded_histogram[i][0]), 0);
}
}
if (tzb->zb_ditto_samevdev != 0) {
(void) printf("\tDittoed blocks on same vdev: %llu\n",
(longlong_t)tzb->zb_ditto_samevdev);
}
if (tzb->zb_ditto_same_ms != 0) {
(void) printf("\tDittoed blocks in same metaslab: %llu\n",
(longlong_t)tzb->zb_ditto_same_ms);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
for (uint64_t v = 0; v < spa->spa_root_vdev->vdev_children; v++) {
vdev_t *vd = spa->spa_root_vdev->vdev_child[v];
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
if (vim == NULL) {
continue;
}
char mem[32];
zdb_nicenum(vdev_indirect_mapping_num_entries(vim),
mem, vdev_indirect_mapping_size(vim));
(void) printf("\tindirect vdev id %llu has %llu segments "
"(%s in memory)\n",
(longlong_t)vd->vdev_id,
(longlong_t)vdev_indirect_mapping_num_entries(vim), mem);
}
2008-11-20 20:01:55 +00:00
if (dump_opt['b'] >= 2) {
int l, t, level;
(void) printf("\nBlocks\tLSIZE\tPSIZE\tASIZE"
"\t avg\t comp\t%%Total\tType\n");
for (t = 0; t <= ZDB_OT_TOTAL; t++) {
char csize[32], lsize[32], psize[32], asize[32];
char avg[32], gang[32];
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
const char *typename;
2008-11-20 20:01:55 +00:00
/* make sure nicenum has enough space */
CTASSERT(sizeof (csize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (lsize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (psize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (asize) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (avg) >= NN_NUMBUF_SZ);
CTASSERT(sizeof (gang) >= NN_NUMBUF_SZ);
if (t < DMU_OT_NUMTYPES)
typename = dmu_ot[t].ot_name;
else
typename = zdb_ot_extname[t - DMU_OT_NUMTYPES];
2008-11-20 20:01:55 +00:00
if (zcb.zcb_type[ZB_TOTAL][t].zb_asize == 0) {
(void) printf("%6s\t%5s\t%5s\t%5s"
"\t%5s\t%5s\t%6s\t%s\n",
"-",
"-",
"-",
"-",
"-",
"-",
"-",
typename);
continue;
}
for (l = ZB_TOTAL - 1; l >= -1; l--) {
level = (l == -1 ? ZB_TOTAL : l);
zb = &zcb.zcb_type[level][t];
if (zb->zb_asize == 0)
continue;
if (dump_opt['b'] < 3 && level != ZB_TOTAL)
continue;
if (level == 0 && zb->zb_asize ==
zcb.zcb_type[ZB_TOTAL][t].zb_asize)
continue;
zdb_nicenum(zb->zb_count, csize,
sizeof (csize));
zdb_nicenum(zb->zb_lsize, lsize,
sizeof (lsize));
zdb_nicenum(zb->zb_psize, psize,
sizeof (psize));
zdb_nicenum(zb->zb_asize, asize,
sizeof (asize));
zdb_nicenum(zb->zb_asize / zb->zb_count, avg,
sizeof (avg));
zdb_nicenum(zb->zb_gangs, gang, sizeof (gang));
2008-11-20 20:01:55 +00:00
(void) printf("%6s\t%5s\t%5s\t%5s\t%5s"
"\t%5.2f\t%6.2f\t",
csize, lsize, psize, asize, avg,
(double)zb->zb_lsize / zb->zb_psize,
100.0 * zb->zb_asize / tzb->zb_asize);
if (level == ZB_TOTAL)
(void) printf("%s\n", typename);
else
(void) printf(" L%d %s\n",
level, typename);
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
if (dump_opt['b'] >= 3 && zb->zb_gangs > 0) {
(void) printf("\t number of ganged "
"blocks: %s\n", gang);
}
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
if (dump_opt['b'] >= 4) {
(void) printf("psize "
"(in 512-byte sectors): "
"number of blocks\n");
dump_histogram(zb->zb_psize_histogram,
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
PSIZE_HISTO_SIZE, 0);
Illumos #3641 compressed block histograms with zdb This patch is a zdb extension of the '-b' option, producing a histogram of the physical compressed block sizes per DMU object type on disk. The '-bbbb' option to zdb will uncover this new feature; here's an example usage on a new pool and snippet of the output it generates: # zpool create tank /dev/vd{b,c,d} # dd bs=1k if=/dev/urandom of=/tank/1kfile count=1 # dd bs=3k if=/dev/urandom of=/tank/3kfile count=1 # dd bs=64k if=/dev/urandom of=/tank/64kfile count=1 # zdb -bbbb tank ... 3 68.0K 68.0K 68.0K 22.7K 1.00 34.26 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... The blocks are also broken down by their indirection level. Expanding on the above example: # zfs set recordsize=1k tank # dd bs=1k if=/dev/urandom of=/tank/2x1kfile count=2 # zdb -bbbb tank ... 1 16K 1K 2K 2K 16.00 1.02 L1 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 1 * 5 70.0K 70.0K 70.0K 14.0K 1.00 35.71 L0 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 3 *** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * 6 86.0K 71.0K 72.0K 12.0K 1.21 36.73 ZFS plain file psize (in 512-byte sectors): number of blocks 2: 4 **** 3: 0 4: 0 5: 0 6: 1 * 7: 0 ... 127: 0 128: 1 * ... There's now a single 1K L1 block which is the indirect block needed for the '2x1kfile' file just created, as well as two more 1K L0 blocks from the same file. This can be used to get a distribution of the block sizes used within the pool, on a per object type basis. References: https://illumos.org/issues/3641 https://github.com/illumos/illumos-gate/commit/490d05b Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Boris Protopopov <boris.protopopov@me.com> Closes #2456
2013-03-24 21:24:51 +00:00
}
2008-11-20 20:01:55 +00:00
}
}
Add block histogram to zdb The block histogram tracks the changes to psize, lsize and asize both in the count of the number of blocks (by blocksize) and the total length of all of the blocks for that blocksize. It also keeps a running total of the cumulative size of all of the blocks up to each size to help determine the size of caching SSDs to be added to zfs hardware deployments. The block history counts and lengths are summarized in bins which are powers of two. Even rows with counts of zero are printed. This change is accessed by specifying one of two options: zdb -bbb pool zdb -Pbbb pool The first version prints the table in fixed size columns. The second prints in "parseable" output that can be placed into a CSV file. Fixed Column, nicenum output sample: block psize lsize asize size Count Length Cum. Count Length Cum. Count Length Cum. 512: 3.50K 1.75M 1.75M 3.43K 1.71M 1.71M 3.41K 1.71M 1.71M 1K: 3.65K 3.67M 5.43M 3.43K 3.44M 5.15M 3.50K 3.51M 5.22M 2K: 3.45K 6.92M 12.3M 3.41K 6.83M 12.0M 3.59K 7.26M 12.5M 4K: 3.44K 13.8M 26.1M 3.43K 13.7M 25.7M 3.49K 14.1M 26.6M 8K: 3.42K 27.3M 53.5M 3.41K 27.3M 53.0M 3.44K 27.6M 54.2M 16K: 3.43K 54.9M 108M 3.50K 56.1M 109M 3.42K 54.7M 109M 32K: 3.44K 110M 219M 3.41K 109M 218M 3.43K 110M 219M 64K: 3.41K 218M 437M 3.41K 218M 437M 3.44K 221M 439M 128K: 3.41K 437M 874M 3.70K 474M 911M 3.41K 437M 876M 256K: 3.41K 874M 1.71G 3.41K 874M 1.74G 3.41K 874M 1.71G 512K: 3.41K 1.71G 3.41G 3.41K 1.71G 3.45G 3.41K 1.71G 3.42G 1M: 3.41K 3.41G 6.82G 3.41K 3.41G 6.86G 3.41K 3.41G 6.83G 2M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 4M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 8M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 16M: 0 0 6.82G 0 0 6.86G 0 0 6.83G Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Robert E. Novak <novak5@llnl.gov> Closes: #9158 Closes #10315
2020-06-26 22:09:20 +00:00
/* Output a table summarizing block sizes in the pool */
if (dump_opt['b'] >= 2) {
dump_size_histograms(&zcb);
}
2008-11-20 20:01:55 +00:00
}
(void) printf("\n");
if (leaks)
return (2);
if (zcb.zcb_haderrors)
return (3);
return (0);
}
typedef struct zdb_ddt_entry {
ddt_key_t zdde_key;
uint64_t zdde_ref_blocks;
uint64_t zdde_ref_lsize;
uint64_t zdde_ref_psize;
uint64_t zdde_ref_dsize;
avl_node_t zdde_node;
} zdb_ddt_entry_t;
/* ARGSUSED */
static int
zdb_ddt_add_cb(spa_t *spa, zilog_t *zilog, const blkptr_t *bp,
const zbookmark_phys_t *zb, const dnode_phys_t *dnp, void *arg)
{
avl_tree_t *t = arg;
avl_index_t where;
zdb_ddt_entry_t *zdde, zdde_search;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
if (zb->zb_level == ZB_DNODE_LEVEL || BP_IS_HOLE(bp) ||
BP_IS_EMBEDDED(bp))
return (0);
if (dump_opt['S'] > 1 && zb->zb_level == ZB_ROOT_LEVEL) {
(void) printf("traversing objset %llu, %llu objects, "
"%lu blocks so far\n",
(u_longlong_t)zb->zb_objset,
(u_longlong_t)BP_GET_FILL(bp),
avl_numnodes(t));
}
if (BP_IS_HOLE(bp) || BP_GET_CHECKSUM(bp) == ZIO_CHECKSUM_OFF ||
BP_GET_LEVEL(bp) > 0 || DMU_OT_IS_METADATA(BP_GET_TYPE(bp)))
return (0);
ddt_key_fill(&zdde_search.zdde_key, bp);
zdde = avl_find(t, &zdde_search, &where);
if (zdde == NULL) {
zdde = umem_zalloc(sizeof (*zdde), UMEM_NOFAIL);
zdde->zdde_key = zdde_search.zdde_key;
avl_insert(t, zdde, where);
}
zdde->zdde_ref_blocks += 1;
zdde->zdde_ref_lsize += BP_GET_LSIZE(bp);
zdde->zdde_ref_psize += BP_GET_PSIZE(bp);
zdde->zdde_ref_dsize += bp_get_dsize_sync(spa, bp);
return (0);
}
static void
dump_simulated_ddt(spa_t *spa)
{
avl_tree_t t;
void *cookie = NULL;
zdb_ddt_entry_t *zdde;
ddt_histogram_t ddh_total;
ddt_stat_t dds_total;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
bzero(&ddh_total, sizeof (ddh_total));
bzero(&dds_total, sizeof (dds_total));
avl_create(&t, ddt_entry_compare,
sizeof (zdb_ddt_entry_t), offsetof(zdb_ddt_entry_t, zdde_node));
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
(void) traverse_pool(spa, 0, TRAVERSE_PRE | TRAVERSE_PREFETCH_METADATA |
TRAVERSE_NO_DECRYPT, zdb_ddt_add_cb, &t);
spa_config_exit(spa, SCL_CONFIG, FTAG);
while ((zdde = avl_destroy_nodes(&t, &cookie)) != NULL) {
ddt_stat_t dds;
uint64_t refcnt = zdde->zdde_ref_blocks;
ASSERT(refcnt != 0);
dds.dds_blocks = zdde->zdde_ref_blocks / refcnt;
dds.dds_lsize = zdde->zdde_ref_lsize / refcnt;
dds.dds_psize = zdde->zdde_ref_psize / refcnt;
dds.dds_dsize = zdde->zdde_ref_dsize / refcnt;
dds.dds_ref_blocks = zdde->zdde_ref_blocks;
dds.dds_ref_lsize = zdde->zdde_ref_lsize;
dds.dds_ref_psize = zdde->zdde_ref_psize;
dds.dds_ref_dsize = zdde->zdde_ref_dsize;
ddt_stat_add(&ddh_total.ddh_stat[highbit64(refcnt) - 1],
&dds, 0);
umem_free(zdde, sizeof (*zdde));
}
avl_destroy(&t);
ddt_histogram_stat(&dds_total, &ddh_total);
(void) printf("Simulated DDT histogram:\n");
zpool_dump_ddt(&dds_total, &ddh_total);
dump_dedup_ratio(&dds_total);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
static int
verify_device_removal_feature_counts(spa_t *spa)
{
uint64_t dr_feature_refcount = 0;
uint64_t oc_feature_refcount = 0;
uint64_t indirect_vdev_count = 0;
uint64_t precise_vdev_count = 0;
uint64_t obsolete_counts_object_count = 0;
uint64_t obsolete_sm_count = 0;
uint64_t obsolete_counts_count = 0;
uint64_t scip_count = 0;
uint64_t obsolete_bpobj_count = 0;
int ret = 0;
spa_condensing_indirect_phys_t *scip =
&spa->spa_condensing_indirect_phys;
if (scip->scip_next_mapping_object != 0) {
vdev_t *vd = spa->spa_root_vdev->vdev_child[scip->scip_vdev];
ASSERT(scip->scip_prev_obsolete_sm_object != 0);
ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
(void) printf("Condensing indirect vdev %llu: new mapping "
"object %llu, prev obsolete sm %llu\n",
(u_longlong_t)scip->scip_vdev,
(u_longlong_t)scip->scip_next_mapping_object,
(u_longlong_t)scip->scip_prev_obsolete_sm_object);
if (scip->scip_prev_obsolete_sm_object != 0) {
space_map_t *prev_obsolete_sm = NULL;
VERIFY0(space_map_open(&prev_obsolete_sm,
spa->spa_meta_objset,
scip->scip_prev_obsolete_sm_object,
0, vd->vdev_asize, 0));
dump_spacemap(spa->spa_meta_objset, prev_obsolete_sm);
(void) printf("\n");
space_map_close(prev_obsolete_sm);
}
scip_count += 2;
}
for (uint64_t i = 0; i < spa->spa_root_vdev->vdev_children; i++) {
vdev_t *vd = spa->spa_root_vdev->vdev_child[i];
vdev_indirect_config_t *vic = &vd->vdev_indirect_config;
if (vic->vic_mapping_object != 0) {
ASSERT(vd->vdev_ops == &vdev_indirect_ops ||
vd->vdev_removing);
indirect_vdev_count++;
if (vd->vdev_indirect_mapping->vim_havecounts) {
obsolete_counts_count++;
}
}
boolean_t are_precise;
VERIFY0(vdev_obsolete_counts_are_precise(vd, &are_precise));
if (are_precise) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
ASSERT(vic->vic_mapping_object != 0);
precise_vdev_count++;
}
uint64_t obsolete_sm_object;
VERIFY0(vdev_obsolete_sm_object(vd, &obsolete_sm_object));
if (obsolete_sm_object != 0) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
ASSERT(vic->vic_mapping_object != 0);
obsolete_sm_count++;
}
}
(void) feature_get_refcount(spa,
&spa_feature_table[SPA_FEATURE_DEVICE_REMOVAL],
&dr_feature_refcount);
(void) feature_get_refcount(spa,
&spa_feature_table[SPA_FEATURE_OBSOLETE_COUNTS],
&oc_feature_refcount);
if (dr_feature_refcount != indirect_vdev_count) {
ret = 1;
(void) printf("Number of indirect vdevs (%llu) " \
"does not match feature count (%llu)\n",
(u_longlong_t)indirect_vdev_count,
(u_longlong_t)dr_feature_refcount);
} else {
(void) printf("Verified device_removal feature refcount " \
"of %llu is correct\n",
(u_longlong_t)dr_feature_refcount);
}
if (zap_contains(spa_meta_objset(spa), DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_OBSOLETE_BPOBJ) == 0) {
obsolete_bpobj_count++;
}
obsolete_counts_object_count = precise_vdev_count;
obsolete_counts_object_count += obsolete_sm_count;
obsolete_counts_object_count += obsolete_counts_count;
obsolete_counts_object_count += scip_count;
obsolete_counts_object_count += obsolete_bpobj_count;
obsolete_counts_object_count += remap_deadlist_count;
if (oc_feature_refcount != obsolete_counts_object_count) {
ret = 1;
(void) printf("Number of obsolete counts objects (%llu) " \
"does not match feature count (%llu)\n",
(u_longlong_t)obsolete_counts_object_count,
(u_longlong_t)oc_feature_refcount);
(void) printf("pv:%llu os:%llu oc:%llu sc:%llu "
"ob:%llu rd:%llu\n",
(u_longlong_t)precise_vdev_count,
(u_longlong_t)obsolete_sm_count,
(u_longlong_t)obsolete_counts_count,
(u_longlong_t)scip_count,
(u_longlong_t)obsolete_bpobj_count,
(u_longlong_t)remap_deadlist_count);
} else {
(void) printf("Verified indirect_refcount feature refcount " \
"of %llu is correct\n",
(u_longlong_t)oc_feature_refcount);
}
return (ret);
}
static void
zdb_set_skip_mmp(char *target)
{
spa_t *spa;
/*
* Disable the activity check to allow examination of
* active pools.
*/
mutex_enter(&spa_namespace_lock);
if ((spa = spa_lookup(target)) != NULL) {
spa->spa_import_flags |= ZFS_IMPORT_SKIP_MMP;
}
mutex_exit(&spa_namespace_lock);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
#define BOGUS_SUFFIX "_CHECKPOINTED_UNIVERSE"
/*
* Import the checkpointed state of the pool specified by the target
* parameter as readonly. The function also accepts a pool config
* as an optional parameter, else it attempts to infer the config by
* the name of the target pool.
*
* Note that the checkpointed state's pool name will be the name of
* the original pool with the above suffix appended to it. In addition,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
* if the target is not a pool name (e.g. a path to a dataset) then
* the new_path parameter is populated with the updated path to
* reflect the fact that we are looking into the checkpointed state.
*
* The function returns a newly-allocated copy of the name of the
* pool containing the checkpointed state. When this copy is no
* longer needed it should be freed with free(3C). Same thing
* applies to the new_path parameter if allocated.
*/
static char *
import_checkpointed_state(char *target, nvlist_t *cfg, char **new_path)
{
int error = 0;
char *poolname, *bogus_name = NULL;
boolean_t freecfg = B_FALSE;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
/* If the target is not a pool, the extract the pool name */
char *path_start = strchr(target, '/');
if (path_start != NULL) {
size_t poolname_len = path_start - target;
poolname = strndup(target, poolname_len);
} else {
poolname = target;
}
if (cfg == NULL) {
zdb_set_skip_mmp(poolname);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
error = spa_get_stats(poolname, &cfg, NULL, 0);
if (error != 0) {
fatal("Tried to read config of pool \"%s\" but "
"spa_get_stats() failed with error %d\n",
poolname, error);
}
freecfg = B_TRUE;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
}
if (asprintf(&bogus_name, "%s%s", poolname, BOGUS_SUFFIX) == -1)
return (NULL);
fnvlist_add_string(cfg, ZPOOL_CONFIG_POOL_NAME, bogus_name);
error = spa_import(bogus_name, cfg, NULL,
ZFS_IMPORT_MISSING_LOG | ZFS_IMPORT_CHECKPOINT |
ZFS_IMPORT_SKIP_MMP);
if (freecfg)
nvlist_free(cfg);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
if (error != 0) {
fatal("Tried to import pool \"%s\" but spa_import() failed "
"with error %d\n", bogus_name, error);
}
if (new_path != NULL && path_start != NULL) {
if (asprintf(new_path, "%s%s", bogus_name, path_start) == -1) {
if (path_start != NULL)
free(poolname);
return (NULL);
}
}
if (target != poolname)
free(poolname);
return (bogus_name);
}
typedef struct verify_checkpoint_sm_entry_cb_arg {
vdev_t *vcsec_vd;
/* the following fields are only used for printing progress */
uint64_t vcsec_entryid;
uint64_t vcsec_num_entries;
} verify_checkpoint_sm_entry_cb_arg_t;
#define ENTRIES_PER_PROGRESS_UPDATE 10000
static int
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
verify_checkpoint_sm_entry_cb(space_map_entry_t *sme, void *arg)
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
{
verify_checkpoint_sm_entry_cb_arg_t *vcsec = arg;
vdev_t *vd = vcsec->vcsec_vd;
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
metaslab_t *ms = vd->vdev_ms[sme->sme_offset >> vd->vdev_ms_shift];
uint64_t end = sme->sme_offset + sme->sme_run;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
ASSERT(sme->sme_type == SM_FREE);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
if ((vcsec->vcsec_entryid % ENTRIES_PER_PROGRESS_UPDATE) == 0) {
(void) fprintf(stderr,
"\rverifying vdev %llu, space map entry %llu of %llu ...",
(longlong_t)vd->vdev_id,
(longlong_t)vcsec->vcsec_entryid,
(longlong_t)vcsec->vcsec_num_entries);
}
vcsec->vcsec_entryid++;
/*
* See comment in checkpoint_sm_exclude_entry_cb()
*/
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
VERIFY3U(sme->sme_offset, >=, ms->ms_start);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
VERIFY3U(end, <=, ms->ms_start + ms->ms_size);
/*
* The entries in the vdev_checkpoint_sm should be marked as
* allocated in the checkpointed state of the pool, therefore
* their respective ms_allocateable trees should not contain them.
*/
mutex_enter(&ms->ms_lock);
range_tree_verify_not_present(ms->ms_allocatable,
sme->sme_offset, sme->sme_run);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
mutex_exit(&ms->ms_lock);
return (0);
}
/*
* Verify that all segments in the vdev_checkpoint_sm are allocated
* according to the checkpoint's ms_sm (i.e. are not in the checkpoint's
* ms_allocatable).
*
* Do so by comparing the checkpoint space maps (vdev_checkpoint_sm) of
* each vdev in the current state of the pool to the metaslab space maps
* (ms_sm) of the checkpointed state of the pool.
*
* Note that the function changes the state of the ms_allocatable
* trees of the current spa_t. The entries of these ms_allocatable
* trees are cleared out and then repopulated from with the free
* entries of their respective ms_sm space maps.
*/
static void
verify_checkpoint_vdev_spacemaps(spa_t *checkpoint, spa_t *current)
{
vdev_t *ckpoint_rvd = checkpoint->spa_root_vdev;
vdev_t *current_rvd = current->spa_root_vdev;
load_concrete_ms_allocatable_trees(checkpoint, SM_FREE);
for (uint64_t c = 0; c < ckpoint_rvd->vdev_children; c++) {
vdev_t *ckpoint_vd = ckpoint_rvd->vdev_child[c];
vdev_t *current_vd = current_rvd->vdev_child[c];
space_map_t *checkpoint_sm = NULL;
uint64_t checkpoint_sm_obj;
if (ckpoint_vd->vdev_ops == &vdev_indirect_ops) {
/*
* Since we don't allow device removal in a pool
* that has a checkpoint, we expect that all removed
* vdevs were removed from the pool before the
* checkpoint.
*/
ASSERT3P(current_vd->vdev_ops, ==, &vdev_indirect_ops);
continue;
}
/*
* If the checkpoint space map doesn't exist, then nothing
* here is checkpointed so there's nothing to verify.
*/
if (current_vd->vdev_top_zap == 0 ||
zap_contains(spa_meta_objset(current),
current_vd->vdev_top_zap,
VDEV_TOP_ZAP_POOL_CHECKPOINT_SM) != 0)
continue;
VERIFY0(zap_lookup(spa_meta_objset(current),
current_vd->vdev_top_zap, VDEV_TOP_ZAP_POOL_CHECKPOINT_SM,
sizeof (uint64_t), 1, &checkpoint_sm_obj));
VERIFY0(space_map_open(&checkpoint_sm, spa_meta_objset(current),
checkpoint_sm_obj, 0, current_vd->vdev_asize,
current_vd->vdev_ashift));
verify_checkpoint_sm_entry_cb_arg_t vcsec;
vcsec.vcsec_vd = ckpoint_vd;
vcsec.vcsec_entryid = 0;
vcsec.vcsec_num_entries =
space_map_length(checkpoint_sm) / sizeof (uint64_t);
VERIFY0(space_map_iterate(checkpoint_sm,
Get rid of space_map_update() for ms_synced_length Initially, metaslabs and space maps used to be the same thing in ZFS. Later, we started differentiating them by referring to the space map as the on-disk state of the metaslab, making the metaslab a higher-level concept that is metadata that deals with space accounting. Today we've managed to split that code furthermore, with the space map being its own on-disk data structure used in areas of ZFS besides metaslabs (e.g. the vdev-wide space maps used for zpool checkpoint or vdev removal features). This patch refactors the space map code to further split the space map code from the metaslab code. It does so by getting rid of the idea that the space map can have a different in-core and on-disk length (sm_length vs smp_length) which is something that is only used for the metaslab code, and other consumers of space maps just have to deal with. Instead, this patch introduces changes that move the old in-core length of the metaslab's space map to the metaslab structure itself (see ms_synced_length field) while making the space map code only care about the actual space map's length on-disk. The result of this is that space map consumers no longer have to deal with syncing two different lengths for the same structure (e.g. space_map_update() goes away) while metaslab specific behavior stays within the metaslab code. Specifically, the ms_synced_length field keeps track of the amount of data metaslab_load() can read from the metaslab's space map while working concurrently with metaslab_sync() that may be appending to that same space map. As a side note, the patch also adds a few comments around the metaslab code documenting some assumptions and expected behavior. Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8328
2019-02-12 18:38:11 +00:00
space_map_length(checkpoint_sm),
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
verify_checkpoint_sm_entry_cb, &vcsec));
if (dump_opt['m'] > 3)
dump_spacemap(current->spa_meta_objset, checkpoint_sm);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
space_map_close(checkpoint_sm);
}
/*
* If we've added vdevs since we took the checkpoint, ensure
* that their checkpoint space maps are empty.
*/
if (ckpoint_rvd->vdev_children < current_rvd->vdev_children) {
for (uint64_t c = ckpoint_rvd->vdev_children;
c < current_rvd->vdev_children; c++) {
vdev_t *current_vd = current_rvd->vdev_child[c];
VERIFY3P(current_vd->vdev_checkpoint_sm, ==, NULL);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
}
}
/* for cleaner progress output */
(void) fprintf(stderr, "\n");
}
/*
* Verifies that all space that's allocated in the checkpoint is
* still allocated in the current version, by checking that everything
* in checkpoint's ms_allocatable (which is actually allocated, not
* allocatable/free) is not present in current's ms_allocatable.
*
* Note that the function changes the state of the ms_allocatable
* trees of both spas when called. The entries of all ms_allocatable
* trees are cleared out and then repopulated from their respective
* ms_sm space maps. In the checkpointed state we load the allocated
* entries, and in the current state we load the free entries.
*/
static void
verify_checkpoint_ms_spacemaps(spa_t *checkpoint, spa_t *current)
{
vdev_t *ckpoint_rvd = checkpoint->spa_root_vdev;
vdev_t *current_rvd = current->spa_root_vdev;
load_concrete_ms_allocatable_trees(checkpoint, SM_ALLOC);
load_concrete_ms_allocatable_trees(current, SM_FREE);
for (uint64_t i = 0; i < ckpoint_rvd->vdev_children; i++) {
vdev_t *ckpoint_vd = ckpoint_rvd->vdev_child[i];
vdev_t *current_vd = current_rvd->vdev_child[i];
if (ckpoint_vd->vdev_ops == &vdev_indirect_ops) {
/*
* See comment in verify_checkpoint_vdev_spacemaps()
*/
ASSERT3P(current_vd->vdev_ops, ==, &vdev_indirect_ops);
continue;
}
for (uint64_t m = 0; m < ckpoint_vd->vdev_ms_count; m++) {
metaslab_t *ckpoint_msp = ckpoint_vd->vdev_ms[m];
metaslab_t *current_msp = current_vd->vdev_ms[m];
(void) fprintf(stderr,
"\rverifying vdev %llu of %llu, "
"metaslab %llu of %llu ...",
(longlong_t)current_vd->vdev_id,
(longlong_t)current_rvd->vdev_children,
(longlong_t)current_vd->vdev_ms[m]->ms_id,
(longlong_t)current_vd->vdev_ms_count);
/*
* We walk through the ms_allocatable trees that
* are loaded with the allocated blocks from the
* ms_sm spacemaps of the checkpoint. For each
* one of these ranges we ensure that none of them
* exists in the ms_allocatable trees of the
* current state which are loaded with the ranges
* that are currently free.
*
* This way we ensure that none of the blocks that
* are part of the checkpoint were freed by mistake.
*/
range_tree_walk(ckpoint_msp->ms_allocatable,
(range_tree_func_t *)range_tree_verify_not_present,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
current_msp->ms_allocatable);
}
}
/* for cleaner progress output */
(void) fprintf(stderr, "\n");
}
static void
verify_checkpoint_blocks(spa_t *spa)
{
ASSERT(!dump_opt['L']);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
spa_t *checkpoint_spa;
char *checkpoint_pool;
int error = 0;
/*
* We import the checkpointed state of the pool (under a different
* name) so we can do verification on it against the current state
* of the pool.
*/
checkpoint_pool = import_checkpointed_state(spa->spa_name, NULL,
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
NULL);
ASSERT(strcmp(spa->spa_name, checkpoint_pool) != 0);
error = spa_open(checkpoint_pool, &checkpoint_spa, FTAG);
if (error != 0) {
fatal("Tried to open pool \"%s\" but spa_open() failed with "
"error %d\n", checkpoint_pool, error);
}
/*
* Ensure that ranges in the checkpoint space maps of each vdev
* are allocated according to the checkpointed state's metaslab
* space maps.
*/
verify_checkpoint_vdev_spacemaps(checkpoint_spa, spa);
/*
* Ensure that allocated ranges in the checkpoint's metaslab
* space maps remain allocated in the metaslab space maps of
* the current state.
*/
verify_checkpoint_ms_spacemaps(checkpoint_spa, spa);
/*
* Once we are done, we get rid of the checkpointed state.
*/
spa_close(checkpoint_spa, FTAG);
free(checkpoint_pool);
}
static void
dump_leftover_checkpoint_blocks(spa_t *spa)
{
vdev_t *rvd = spa->spa_root_vdev;
for (uint64_t i = 0; i < rvd->vdev_children; i++) {
vdev_t *vd = rvd->vdev_child[i];
space_map_t *checkpoint_sm = NULL;
uint64_t checkpoint_sm_obj;
if (vd->vdev_top_zap == 0)
continue;
if (zap_contains(spa_meta_objset(spa), vd->vdev_top_zap,
VDEV_TOP_ZAP_POOL_CHECKPOINT_SM) != 0)
continue;
VERIFY0(zap_lookup(spa_meta_objset(spa), vd->vdev_top_zap,
VDEV_TOP_ZAP_POOL_CHECKPOINT_SM,
sizeof (uint64_t), 1, &checkpoint_sm_obj));
VERIFY0(space_map_open(&checkpoint_sm, spa_meta_objset(spa),
checkpoint_sm_obj, 0, vd->vdev_asize, vd->vdev_ashift));
dump_spacemap(spa->spa_meta_objset, checkpoint_sm);
space_map_close(checkpoint_sm);
}
}
static int
verify_checkpoint(spa_t *spa)
{
uberblock_t checkpoint;
int error;
if (!spa_feature_is_active(spa, SPA_FEATURE_POOL_CHECKPOINT))
return (0);
error = zap_lookup(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_ZPOOL_CHECKPOINT, sizeof (uint64_t),
sizeof (uberblock_t) / sizeof (uint64_t), &checkpoint);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
if (error == ENOENT && !dump_opt['L']) {
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
/*
* If the feature is active but the uberblock is missing
* then we must be in the middle of discarding the
* checkpoint.
*/
(void) printf("\nPartially discarded checkpoint "
"state found:\n");
if (dump_opt['m'] > 3)
dump_leftover_checkpoint_blocks(spa);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
return (0);
} else if (error != 0) {
(void) printf("lookup error %d when looking for "
"checkpointed uberblock in MOS\n", error);
return (error);
}
dump_uberblock(&checkpoint, "\nCheckpointed uberblock found:\n", "\n");
if (checkpoint.ub_checkpoint_txg == 0) {
(void) printf("\nub_checkpoint_txg not set in checkpointed "
"uberblock\n");
error = 3;
}
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
if (error == 0 && !dump_opt['L'])
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
verify_checkpoint_blocks(spa);
return (error);
}
/* ARGSUSED */
static void
mos_leaks_cb(void *arg, uint64_t start, uint64_t size)
{
for (uint64_t i = start; i < size; i++) {
(void) printf("MOS object %llu referenced but not allocated\n",
(u_longlong_t)i);
}
}
static void
mos_obj_refd(uint64_t obj)
{
if (obj != 0 && mos_refd_objs != NULL)
range_tree_add(mos_refd_objs, obj, 1);
}
/*
* Call on a MOS object that may already have been referenced.
*/
static void
mos_obj_refd_multiple(uint64_t obj)
{
if (obj != 0 && mos_refd_objs != NULL &&
!range_tree_contains(mos_refd_objs, obj, 1))
range_tree_add(mos_refd_objs, obj, 1);
}
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
static void
mos_leak_vdev_top_zap(vdev_t *vd)
{
uint64_t ms_flush_data_obj;
int error = zap_lookup(spa_meta_objset(vd->vdev_spa),
vd->vdev_top_zap, VDEV_TOP_ZAP_MS_UNFLUSHED_PHYS_TXGS,
sizeof (ms_flush_data_obj), 1, &ms_flush_data_obj);
if (error == ENOENT)
return;
ASSERT0(error);
mos_obj_refd(ms_flush_data_obj);
}
static void
mos_leak_vdev(vdev_t *vd)
{
mos_obj_refd(vd->vdev_dtl_object);
mos_obj_refd(vd->vdev_ms_array);
mos_obj_refd(vd->vdev_indirect_config.vic_births_object);
mos_obj_refd(vd->vdev_indirect_config.vic_mapping_object);
mos_obj_refd(vd->vdev_leaf_zap);
if (vd->vdev_checkpoint_sm != NULL)
mos_obj_refd(vd->vdev_checkpoint_sm->sm_object);
if (vd->vdev_indirect_mapping != NULL) {
mos_obj_refd(vd->vdev_indirect_mapping->
vim_phys->vimp_counts_object);
}
if (vd->vdev_obsolete_sm != NULL)
mos_obj_refd(vd->vdev_obsolete_sm->sm_object);
for (uint64_t m = 0; m < vd->vdev_ms_count; m++) {
metaslab_t *ms = vd->vdev_ms[m];
mos_obj_refd(space_map_object(ms->ms_sm));
}
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
if (vd->vdev_top_zap != 0) {
mos_obj_refd(vd->vdev_top_zap);
mos_leak_vdev_top_zap(vd);
}
for (uint64_t c = 0; c < vd->vdev_children; c++) {
mos_leak_vdev(vd->vdev_child[c]);
}
}
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
static void
mos_leak_log_spacemaps(spa_t *spa)
{
uint64_t spacemap_zap;
int error = zap_lookup(spa_meta_objset(spa),
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_LOG_SPACEMAP_ZAP,
sizeof (spacemap_zap), 1, &spacemap_zap);
if (error == ENOENT)
return;
ASSERT0(error);
mos_obj_refd(spacemap_zap);
for (spa_log_sm_t *sls = avl_first(&spa->spa_sm_logs_by_txg);
sls; sls = AVL_NEXT(&spa->spa_sm_logs_by_txg, sls))
mos_obj_refd(sls->sls_sm_obj);
}
static int
dump_mos_leaks(spa_t *spa)
{
int rv = 0;
objset_t *mos = spa->spa_meta_objset;
dsl_pool_t *dp = spa->spa_dsl_pool;
/* Visit and mark all referenced objects in the MOS */
mos_obj_refd(DMU_POOL_DIRECTORY_OBJECT);
mos_obj_refd(spa->spa_pool_props_object);
mos_obj_refd(spa->spa_config_object);
mos_obj_refd(spa->spa_ddt_stat_object);
mos_obj_refd(spa->spa_feat_desc_obj);
mos_obj_refd(spa->spa_feat_enabled_txg_obj);
mos_obj_refd(spa->spa_feat_for_read_obj);
mos_obj_refd(spa->spa_feat_for_write_obj);
mos_obj_refd(spa->spa_history);
mos_obj_refd(spa->spa_errlog_last);
mos_obj_refd(spa->spa_errlog_scrub);
mos_obj_refd(spa->spa_all_vdev_zaps);
mos_obj_refd(spa->spa_dsl_pool->dp_bptree_obj);
mos_obj_refd(spa->spa_dsl_pool->dp_tmp_userrefs_obj);
mos_obj_refd(spa->spa_dsl_pool->dp_scan->scn_phys.scn_queue_obj);
bpobj_count_refd(&spa->spa_deferred_bpobj);
mos_obj_refd(dp->dp_empty_bpobj);
bpobj_count_refd(&dp->dp_obsolete_bpobj);
bpobj_count_refd(&dp->dp_free_bpobj);
mos_obj_refd(spa->spa_l2cache.sav_object);
mos_obj_refd(spa->spa_spares.sav_object);
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
if (spa->spa_syncing_log_sm != NULL)
mos_obj_refd(spa->spa_syncing_log_sm->sm_object);
mos_leak_log_spacemaps(spa);
mos_obj_refd(spa->spa_condensing_indirect_phys.
scip_next_mapping_object);
mos_obj_refd(spa->spa_condensing_indirect_phys.
scip_prev_obsolete_sm_object);
if (spa->spa_condensing_indirect_phys.scip_next_mapping_object != 0) {
vdev_indirect_mapping_t *vim =
vdev_indirect_mapping_open(mos,
spa->spa_condensing_indirect_phys.scip_next_mapping_object);
mos_obj_refd(vim->vim_phys->vimp_counts_object);
vdev_indirect_mapping_close(vim);
}
deleted_livelists_dump_mos(spa);
if (dp->dp_origin_snap != NULL) {
dsl_dataset_t *ds;
dsl_pool_config_enter(dp, FTAG);
VERIFY0(dsl_dataset_hold_obj(dp,
dsl_dataset_phys(dp->dp_origin_snap)->ds_next_snap_obj,
FTAG, &ds));
count_ds_mos_objects(ds);
dump_blkptr_list(&ds->ds_deadlist, "Deadlist");
dsl_dataset_rele(ds, FTAG);
dsl_pool_config_exit(dp, FTAG);
count_ds_mos_objects(dp->dp_origin_snap);
dump_blkptr_list(&dp->dp_origin_snap->ds_deadlist, "Deadlist");
}
count_dir_mos_objects(dp->dp_mos_dir);
if (dp->dp_free_dir != NULL)
count_dir_mos_objects(dp->dp_free_dir);
if (dp->dp_leak_dir != NULL)
count_dir_mos_objects(dp->dp_leak_dir);
mos_leak_vdev(spa->spa_root_vdev);
for (uint64_t class = 0; class < DDT_CLASSES; class++) {
for (uint64_t type = 0; type < DDT_TYPES; type++) {
for (uint64_t cksum = 0;
cksum < ZIO_CHECKSUM_FUNCTIONS; cksum++) {
ddt_t *ddt = spa->spa_ddt[cksum];
mos_obj_refd(ddt->ddt_object[type][class]);
}
}
}
/*
* Visit all allocated objects and make sure they are referenced.
*/
uint64_t object = 0;
while (dmu_object_next(mos, &object, B_FALSE, 0) == 0) {
if (range_tree_contains(mos_refd_objs, object, 1)) {
range_tree_remove(mos_refd_objs, object, 1);
} else {
dmu_object_info_t doi;
const char *name;
dmu_object_info(mos, object, &doi);
if (doi.doi_type & DMU_OT_NEWTYPE) {
dmu_object_byteswap_t bswap =
DMU_OT_BYTESWAP(doi.doi_type);
name = dmu_ot_byteswap[bswap].ob_name;
} else {
name = dmu_ot[doi.doi_type].ot_name;
}
(void) printf("MOS object %llu (%s) leaked\n",
(u_longlong_t)object, name);
rv = 2;
}
}
(void) range_tree_walk(mos_refd_objs, mos_leaks_cb, NULL);
if (!range_tree_is_empty(mos_refd_objs))
rv = 2;
range_tree_vacate(mos_refd_objs, NULL, NULL);
range_tree_destroy(mos_refd_objs);
return (rv);
}
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
typedef struct log_sm_obsolete_stats_arg {
uint64_t lsos_current_txg;
uint64_t lsos_total_entries;
uint64_t lsos_valid_entries;
uint64_t lsos_sm_entries;
uint64_t lsos_valid_sm_entries;
} log_sm_obsolete_stats_arg_t;
static int
log_spacemap_obsolete_stats_cb(spa_t *spa, space_map_entry_t *sme,
uint64_t txg, void *arg)
{
log_sm_obsolete_stats_arg_t *lsos = arg;
uint64_t offset = sme->sme_offset;
uint64_t vdev_id = sme->sme_vdev;
if (lsos->lsos_current_txg == 0) {
/* this is the first log */
lsos->lsos_current_txg = txg;
} else if (lsos->lsos_current_txg < txg) {
/* we just changed log - print stats and reset */
(void) printf("%-8llu valid entries out of %-8llu - txg %llu\n",
(u_longlong_t)lsos->lsos_valid_sm_entries,
(u_longlong_t)lsos->lsos_sm_entries,
(u_longlong_t)lsos->lsos_current_txg);
lsos->lsos_valid_sm_entries = 0;
lsos->lsos_sm_entries = 0;
lsos->lsos_current_txg = txg;
}
ASSERT3U(lsos->lsos_current_txg, ==, txg);
lsos->lsos_sm_entries++;
lsos->lsos_total_entries++;
vdev_t *vd = vdev_lookup_top(spa, vdev_id);
if (!vdev_is_concrete(vd))
return (0);
metaslab_t *ms = vd->vdev_ms[offset >> vd->vdev_ms_shift];
ASSERT(sme->sme_type == SM_ALLOC || sme->sme_type == SM_FREE);
if (txg < metaslab_unflushed_txg(ms))
return (0);
lsos->lsos_valid_sm_entries++;
lsos->lsos_valid_entries++;
return (0);
}
static void
dump_log_spacemap_obsolete_stats(spa_t *spa)
{
if (!spa_feature_is_active(spa, SPA_FEATURE_LOG_SPACEMAP))
return;
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
log_sm_obsolete_stats_arg_t lsos;
bzero(&lsos, sizeof (lsos));
(void) printf("Log Space Map Obsolete Entry Statistics:\n");
iterate_through_spacemap_logs(spa,
log_spacemap_obsolete_stats_cb, &lsos);
/* print stats for latest log */
(void) printf("%-8llu valid entries out of %-8llu - txg %llu\n",
(u_longlong_t)lsos.lsos_valid_sm_entries,
(u_longlong_t)lsos.lsos_sm_entries,
(u_longlong_t)lsos.lsos_current_txg);
(void) printf("%-8llu valid entries out of %-8llu - total\n\n",
(u_longlong_t)lsos.lsos_valid_entries,
(u_longlong_t)lsos.lsos_total_entries);
}
2008-11-20 20:01:55 +00:00
static void
dump_zpool(spa_t *spa)
{
dsl_pool_t *dp = spa_get_dsl(spa);
int rc = 0;
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
if (dump_opt['y']) {
livelist_metaslab_validate(spa);
}
if (dump_opt['S']) {
dump_simulated_ddt(spa);
return;
}
if (!dump_opt['e'] && dump_opt['C'] > 1) {
(void) printf("\nCached configuration:\n");
dump_nvlist(spa->spa_config, 8);
}
if (dump_opt['C'])
dump_config(spa);
2008-11-20 20:01:55 +00:00
if (dump_opt['u'])
dump_uberblock(&spa->spa_uberblock, "\nUberblock:\n", "\n");
2008-11-20 20:01:55 +00:00
if (dump_opt['D'])
dump_all_ddts(spa);
if (dump_opt['d'] > 2 || dump_opt['m'])
dump_metaslabs(spa);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
if (dump_opt['M'])
dump_metaslab_groups(spa);
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
if (dump_opt['d'] > 2 || dump_opt['m']) {
dump_log_spacemaps(spa);
dump_log_spacemap_obsolete_stats(spa);
}
if (dump_opt['d'] || dump_opt['i']) {
spa_feature_t f;
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 17:36:03 +00:00
mos_refd_objs = range_tree_create(NULL, RANGE_SEG64, NULL, 0,
0);
dump_objset(dp->dp_meta_objset);
2008-11-20 20:01:55 +00:00
if (dump_opt['d'] >= 3) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
dsl_pool_t *dp = spa->spa_dsl_pool;
dump_full_bpobj(&spa->spa_deferred_bpobj,
"Deferred frees", 0);
if (spa_version(spa) >= SPA_VERSION_DEADLISTS) {
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
dump_full_bpobj(&dp->dp_free_bpobj,
"Pool snapshot frees", 0);
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
if (bpobj_is_open(&dp->dp_obsolete_bpobj)) {
ASSERT(spa_feature_is_enabled(spa,
SPA_FEATURE_DEVICE_REMOVAL));
dump_full_bpobj(&dp->dp_obsolete_bpobj,
"Pool obsolete blocks", 0);
}
if (spa_feature_is_active(spa,
SPA_FEATURE_ASYNC_DESTROY)) {
dump_bptree(spa->spa_meta_objset,
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
dp->dp_bptree_obj,
"Pool dataset frees");
}
2008-11-20 20:01:55 +00:00
dump_dtl(spa->spa_root_vdev, 0);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
for (spa_feature_t f = 0; f < SPA_FEATURES; f++)
global_feature_count[f] = UINT64_MAX;
global_feature_count[SPA_FEATURE_REDACTION_BOOKMARKS] = 0;
global_feature_count[SPA_FEATURE_BOOKMARK_WRITTEN] = 0;
global_feature_count[SPA_FEATURE_LIVELIST] = 0;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
(void) dmu_objset_find(spa_name(spa), dump_one_objset,
NULL, DS_FIND_SNAPSHOTS | DS_FIND_CHILDREN);
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
if (rc == 0 && !dump_opt['L'])
rc = dump_mos_leaks(spa);
for (f = 0; f < SPA_FEATURES; f++) {
uint64_t refcount;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
uint64_t *arr;
if (!(spa_feature_table[f].fi_flags &
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
ZFEATURE_FLAG_PER_DATASET)) {
if (global_feature_count[f] == UINT64_MAX)
continue;
if (!spa_feature_is_enabled(spa, f)) {
ASSERT0(global_feature_count[f]);
continue;
}
arr = global_feature_count;
} else {
if (!spa_feature_is_enabled(spa, f)) {
ASSERT0(dataset_feature_count[f]);
continue;
}
arr = dataset_feature_count;
}
if (feature_get_refcount(spa, &spa_feature_table[f],
&refcount) == ENOTSUP)
continue;
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
if (arr[f] != refcount) {
(void) printf("%s feature refcount mismatch: "
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
"%lld consumers != %lld refcount\n",
spa_feature_table[f].fi_uname,
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
(longlong_t)arr[f], (longlong_t)refcount);
rc = 2;
} else {
(void) printf("Verified %s feature refcount "
"of %llu is correct\n",
spa_feature_table[f].fi_uname,
(longlong_t)refcount);
}
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
}
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
Log Spacemap Project = Motivation At Delphix we've seen a lot of customer systems where fragmentation is over 75% and random writes take a performance hit because a lot of time is spend on I/Os that update on-disk space accounting metadata. Specifically, we seen cases where 20% to 40% of sync time is spend after sync pass 1 and ~30% of the I/Os on the system is spent updating spacemaps. The problem is that these pools have existed long enough that we've touched almost every metaslab at least once, and random writes scatter frees across all metaslabs every TXG, thus appending to their spacemaps and resulting in many I/Os. To give an example, assuming that every VDEV has 200 metaslabs and our writes fit within a single spacemap block (generally 4K) we have 200 I/Os. Then if we assume 2 levels of indirection, we need 400 additional I/Os and since we are talking about metadata for which we keep 2 extra copies for redundancy we need to triple that number, leading to a total of 1800 I/Os per VDEV every TXG. We could try and decrease the number of metaslabs so we have less I/Os per TXG but then each metaslab would cover a wider range on disk and thus would take more time to be loaded in memory from disk. In addition, after it's loaded, it's range tree would consume more memory. Another idea would be to just increase the spacemap block size which would allow us to fit more entries within an I/O block resulting in fewer I/Os per metaslab and a speedup in loading time. The problem is still that we don't deal with the number of I/Os going up as the number of metaslabs is increasing and the fact is that we generally write a lot to a few metaslabs and a little to the rest of them. Thus, just increasing the block size would actually waste bandwidth because we won't be utilizing our bigger block size. = About this patch This patch introduces the Log Spacemap project which provides the solution to the above problem while taking into account all the aforementioned tradeoffs. The details on how it achieves that can be found in the references sections below and in the code (see Big Theory Statement in spa_log_spacemap.c). Even though the change is fairly constraint within the metaslab and lower-level SPA codepaths, there is a side-change that is user-facing. The change is that VDEV IDs from VDEV holes will no longer be reused. To give some background and reasoning for this, when a log device is removed and its VDEV structure was replaced with a hole (or was compacted; if at the end of the vdev array), its vdev_id could be reused by devices added after that. Now with the pool-wide space maps recording the vdev ID, this behavior can cause problems (e.g. is this entry referring to a segment in the new vdev or the removed log?). Thus, to simplify things the ID reuse behavior is gone and now vdev IDs for top-level vdevs are truly unique within a pool. = Testing The illumos implementation of this feature has been used internally for a year and has been in production for ~6 months. For this patch specifically there don't seem to be any regressions introduced to ZTS and I have been running zloop for a week without any related problems. = Performance Analysis (Linux Specific) All performance results and analysis for illumos can be found in the links of the references. Redoing the same experiments in Linux gave similar results. Below are the specifics of the Linux run. After the pool reached stable state the percentage of the time spent in pass 1 per TXG was 64% on average for the stock bits while the log spacemap bits stayed at 95% during the experiment (graph: sdimitro.github.io/img/linux-lsm/PercOfSyncInPassOne.png). Sync times per TXG were 37.6 seconds on average for the stock bits and 22.7 seconds for the log spacemap bits (related graph: sdimitro.github.io/img/linux-lsm/SyncTimePerTXG.png). As a result the log spacemap bits were able to push more TXGs, which is also the reason why all graphs quantified per TXG have more entries for the log spacemap bits. Another interesting aspect in terms of txg syncs is that the stock bits had 22% of their TXGs reach sync pass 7, 55% reach sync pass 8, and 20% reach 9. The log space map bits reached sync pass 4 in 79% of their TXGs, sync pass 7 in 19%, and sync pass 8 at 1%. This emphasizes the fact that not only we spend less time on metadata but we also iterate less times to convergence in spa_sync() dirtying objects. [related graphs: stock- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGStock.png lsm- sdimitro.github.io/img/linux-lsm/NumberOfPassesPerTXGLSM.png] Finally, the improvement in IOPs that the userland gains from the change is approximately 40%. There is a consistent win in IOPS as you can see from the graphs below but the absolute amount of improvement that the log spacemap gives varies within each minute interval. sdimitro.github.io/img/linux-lsm/StockVsLog3Days.png sdimitro.github.io/img/linux-lsm/StockVsLog10Hours.png = Porting to Other Platforms For people that want to port this commit to other platforms below is a list of ZoL commits that this patch depends on: Make zdb results for checkpoint tests consistent db587941c5ff6dea01932bb78f70db63cf7f38ba Update vdev_is_spacemap_addressable() for new spacemap encoding 419ba5914552c6185afbe1dd17b3ed4b0d526547 Simplify spa_sync by breaking it up to smaller functions 8dc2197b7b1e4d7ebc1420ea30e51c6541f1d834 Factor metaslab_load_wait() in metaslab_load() b194fab0fb6caad18711abccaff3c69ad8b3f6d3 Rename range_tree_verify to range_tree_verify_not_present df72b8bebe0ebac0b20e0750984bad182cb6564a Change target size of metaslabs from 256GB to 16GB c853f382db731e15a87512f4ef1101d14d778a55 zdb -L should skip leak detection altogether 21e7cf5da89f55ce98ec1115726b150e19eefe89 vs_alloc can underflow in L2ARC vdevs 7558997d2f808368867ca7e5234e5793446e8f3f Simplify log vdev removal code 6c926f426a26ffb6d7d8e563e33fc176164175cb Get rid of space_map_update() for ms_synced_length 425d3237ee88abc53d8522a7139c926d278b4b7f Introduce auxiliary metaslab histograms 928e8ad47d3478a3d5d01f0dd6ae74a9371af65e Error path in metaslab_load_impl() forgets to drop ms_sync_lock 8eef997679ba54547f7d361553d21b3291f41ae7 = References Background, Motivation, and Internals of the Feature - OpenZFS 2017 Presentation: youtu.be/jj2IxRkl5bQ - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemaps-project Flushing Algorithm Internals & Performance Results (Illumos Specific) - Blogpost: sdimitro.github.io/post/zfs-lsm-flushing/ - OpenZFS 2018 Presentation: youtu.be/x6D2dHRjkxw - Slides: slideshare.net/SerapheimNikolaosDim/zfs-log-spacemap-flushing-algorithm Upstream Delphix Issues: DLPX-51539, DLPX-59659, DLPX-57783, DLPX-61438, DLPX-41227, DLPX-59320 DLPX-63385 Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com> Closes #8442
2019-07-16 17:11:49 +00:00
if (rc == 0)
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
rc = verify_device_removal_feature_counts(spa);
2008-11-20 20:01:55 +00:00
}
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
if (rc == 0 && (dump_opt['b'] || dump_opt['c']))
2008-11-20 20:01:55 +00:00
rc = dump_block_stats(spa);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (rc == 0)
rc = verify_spacemap_refcounts(spa);
2008-11-20 20:01:55 +00:00
if (dump_opt['s'])
show_pool_stats(spa);
if (dump_opt['h'])
dump_history(spa);
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
if (rc == 0)
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
rc = verify_checkpoint(spa);
if (rc != 0) {
dump_debug_buffer();
2008-11-20 20:01:55 +00:00
exit(rc);
}
2008-11-20 20:01:55 +00:00
}
#define ZDB_FLAG_CHECKSUM 0x0001
#define ZDB_FLAG_DECOMPRESS 0x0002
#define ZDB_FLAG_BSWAP 0x0004
#define ZDB_FLAG_GBH 0x0008
#define ZDB_FLAG_INDIRECT 0x0010
#define ZDB_FLAG_RAW 0x0020
#define ZDB_FLAG_PRINT_BLKPTR 0x0040
#define ZDB_FLAG_VERBOSE 0x0080
static int flagbits[256];
static char flagbitstr[16];
2008-11-20 20:01:55 +00:00
static void
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
zdb_print_blkptr(const blkptr_t *bp, int flags)
2008-11-20 20:01:55 +00:00
{
char blkbuf[BP_SPRINTF_LEN];
2008-11-20 20:01:55 +00:00
if (flags & ZDB_FLAG_BSWAP)
byteswap_uint64_array((void *)bp, sizeof (blkptr_t));
snprintf_blkptr(blkbuf, sizeof (blkbuf), bp);
(void) printf("%s\n", blkbuf);
2008-11-20 20:01:55 +00:00
}
static void
zdb_dump_indirect(blkptr_t *bp, int nbps, int flags)
{
int i;
for (i = 0; i < nbps; i++)
zdb_print_blkptr(&bp[i], flags);
}
static void
zdb_dump_gbh(void *buf, int flags)
{
zdb_dump_indirect((blkptr_t *)buf, SPA_GBH_NBLKPTRS, flags);
}
static void
zdb_dump_block_raw(void *buf, uint64_t size, int flags)
{
if (flags & ZDB_FLAG_BSWAP)
byteswap_uint64_array(buf, size);
VERIFY(write(fileno(stdout), buf, size) == size);
2008-11-20 20:01:55 +00:00
}
static void
zdb_dump_block(char *label, void *buf, uint64_t size, int flags)
{
uint64_t *d = (uint64_t *)buf;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
unsigned nwords = size / sizeof (uint64_t);
2008-11-20 20:01:55 +00:00
int do_bswap = !!(flags & ZDB_FLAG_BSWAP);
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
unsigned i, j;
const char *hdr;
char *c;
2008-11-20 20:01:55 +00:00
if (do_bswap)
hdr = " 7 6 5 4 3 2 1 0 f e d c b a 9 8";
else
hdr = " 0 1 2 3 4 5 6 7 8 9 a b c d e f";
(void) printf("\n%s\n%6s %s 0123456789abcdef\n", label, "", hdr);
#ifdef _LITTLE_ENDIAN
/* correct the endianness */
do_bswap = !do_bswap;
#endif
2008-11-20 20:01:55 +00:00
for (i = 0; i < nwords; i += 2) {
(void) printf("%06llx: %016llx %016llx ",
(u_longlong_t)(i * sizeof (uint64_t)),
(u_longlong_t)(do_bswap ? BSWAP_64(d[i]) : d[i]),
(u_longlong_t)(do_bswap ? BSWAP_64(d[i + 1]) : d[i + 1]));
c = (char *)&d[i];
for (j = 0; j < 2 * sizeof (uint64_t); j++)
(void) printf("%c", isprint(c[j]) ? c[j] : '.');
(void) printf("\n");
}
}
/*
* There are two acceptable formats:
* leaf_name - For example: c1t0d0 or /tmp/ztest.0a
* child[.child]* - For example: 0.1.1
*
* The second form can be used to specify arbitrary vdevs anywhere
* in the hierarchy. For example, in a pool with a mirror of
2008-11-20 20:01:55 +00:00
* RAID-Zs, you can specify either RAID-Z vdev with 0.0 or 0.1 .
*/
static vdev_t *
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
zdb_vdev_lookup(vdev_t *vdev, const char *path)
2008-11-20 20:01:55 +00:00
{
char *s, *p, *q;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
unsigned i;
2008-11-20 20:01:55 +00:00
if (vdev == NULL)
return (NULL);
/* First, assume the x.x.x.x format */
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
i = strtoul(path, &s, 10);
2008-11-20 20:01:55 +00:00
if (s == path || (s && *s != '.' && *s != '\0'))
goto name;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
if (i >= vdev->vdev_children)
2008-11-20 20:01:55 +00:00
return (NULL);
vdev = vdev->vdev_child[i];
if (s && *s == '\0')
2008-11-20 20:01:55 +00:00
return (vdev);
return (zdb_vdev_lookup(vdev, s+1));
name:
for (i = 0; i < vdev->vdev_children; i++) {
vdev_t *vc = vdev->vdev_child[i];
if (vc->vdev_path == NULL) {
vc = zdb_vdev_lookup(vc, path);
if (vc == NULL)
continue;
else
return (vc);
}
p = strrchr(vc->vdev_path, '/');
p = p ? p + 1 : vc->vdev_path;
q = &vc->vdev_path[strlen(vc->vdev_path) - 2];
if (strcmp(vc->vdev_path, path) == 0)
return (vc);
if (strcmp(p, path) == 0)
return (vc);
if (strcmp(q, "s0") == 0 && strncmp(p, path, q - p) == 0)
return (vc);
}
return (NULL);
}
static int
name_from_objset_id(spa_t *spa, uint64_t objset_id, char *outstr)
{
dsl_dataset_t *ds;
dsl_pool_config_enter(spa->spa_dsl_pool, FTAG);
int error = dsl_dataset_hold_obj(spa->spa_dsl_pool, objset_id,
NULL, &ds);
if (error != 0) {
(void) fprintf(stderr, "failed to hold objset %llu: %s\n",
(u_longlong_t)objset_id, strerror(error));
dsl_pool_config_exit(spa->spa_dsl_pool, FTAG);
return (error);
}
dsl_dataset_name(ds, outstr);
dsl_dataset_rele(ds, NULL);
dsl_pool_config_exit(spa->spa_dsl_pool, FTAG);
return (0);
}
static boolean_t
zdb_parse_block_sizes(char *sizes, uint64_t *lsize, uint64_t *psize)
{
char *s0, *s1;
if (sizes == NULL)
return (B_FALSE);
s0 = strtok(sizes, "/");
if (s0 == NULL)
return (B_FALSE);
s1 = strtok(NULL, "/");
*lsize = strtoull(s0, NULL, 16);
*psize = s1 ? strtoull(s1, NULL, 16) : *lsize;
return (*lsize >= *psize && *psize > 0);
}
#define ZIO_COMPRESS_MASK(alg) (1ULL << (ZIO_COMPRESS_##alg))
static boolean_t
zdb_decompress_block(abd_t *pabd, void *buf, void *lbuf, uint64_t lsize,
uint64_t psize, int flags)
{
boolean_t exceeded = B_FALSE;
/*
* We don't know how the data was compressed, so just try
* every decompress function at every inflated blocksize.
*/
void *lbuf2 = umem_alloc(SPA_MAXBLOCKSIZE, UMEM_NOFAIL);
int cfuncs[ZIO_COMPRESS_FUNCTIONS] = { 0 };
int *cfuncp = cfuncs;
uint64_t maxlsize = SPA_MAXBLOCKSIZE;
uint64_t mask = ZIO_COMPRESS_MASK(ON) | ZIO_COMPRESS_MASK(OFF) |
ZIO_COMPRESS_MASK(INHERIT) | ZIO_COMPRESS_MASK(EMPTY) |
(getenv("ZDB_NO_ZLE") ? ZIO_COMPRESS_MASK(ZLE) : 0);
*cfuncp++ = ZIO_COMPRESS_LZ4;
*cfuncp++ = ZIO_COMPRESS_LZJB;
mask |= ZIO_COMPRESS_MASK(LZ4) | ZIO_COMPRESS_MASK(LZJB);
for (int c = 0; c < ZIO_COMPRESS_FUNCTIONS; c++)
if (((1ULL << c) & mask) == 0)
*cfuncp++ = c;
/*
* On the one hand, with SPA_MAXBLOCKSIZE at 16MB, this
* could take a while and we should let the user know
* we are not stuck. On the other hand, printing progress
* info gets old after a while. User can specify 'v' flag
* to see the progression.
*/
if (lsize == psize)
lsize += SPA_MINBLOCKSIZE;
else
maxlsize = lsize;
for (; lsize <= maxlsize; lsize += SPA_MINBLOCKSIZE) {
for (cfuncp = cfuncs; *cfuncp; cfuncp++) {
if (flags & ZDB_FLAG_VERBOSE) {
(void) fprintf(stderr,
"Trying %05llx -> %05llx (%s)\n",
(u_longlong_t)psize,
(u_longlong_t)lsize,
zio_compress_table[*cfuncp].\
ci_name);
}
/*
* We randomize lbuf2, and decompress to both
* lbuf and lbuf2. This way, we will know if
* decompression fill exactly to lsize.
*/
VERIFY0(random_get_pseudo_bytes(lbuf2, lsize));
if (zio_decompress_data(*cfuncp, pabd,
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
lbuf, psize, lsize, NULL) == 0 &&
zio_decompress_data(*cfuncp, pabd,
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
lbuf2, psize, lsize, NULL) == 0 &&
bcmp(lbuf, lbuf2, lsize) == 0)
break;
}
if (*cfuncp != 0)
break;
}
umem_free(lbuf2, SPA_MAXBLOCKSIZE);
if (lsize > maxlsize) {
exceeded = B_TRUE;
}
buf = lbuf;
if (*cfuncp == ZIO_COMPRESS_ZLE) {
printf("\nZLE decompression was selected. If you "
"suspect the results are wrong,\ntry avoiding ZLE "
"by setting and exporting ZDB_NO_ZLE=\"true\"\n");
}
return (exceeded);
}
2008-11-20 20:01:55 +00:00
/*
* Read a block from a pool and print it out. The syntax of the
* block descriptor is:
*
* pool:vdev_specifier:offset:[lsize/]psize[:flags]
2008-11-20 20:01:55 +00:00
*
* pool - The name of the pool you wish to read from
* vdev_specifier - Which vdev (see comment for zdb_vdev_lookup)
* offset - offset, in hex, in bytes
* size - Amount of data to read, in hex, in bytes
* flags - A string of characters specifying options
* b: Decode a blkptr at given offset within block
* c: Calculate and display checksums
* d: Decompress data before dumping
2008-11-20 20:01:55 +00:00
* e: Byteswap data before dumping
* g: Display data as a gang block header
* i: Display as an indirect block
2008-11-20 20:01:55 +00:00
* r: Dump raw data to stdout
* v: Verbose
2008-11-20 20:01:55 +00:00
*
*/
static void
zdb_read_block(char *thing, spa_t *spa)
2008-11-20 20:01:55 +00:00
{
blkptr_t blk, *bp = &blk;
dva_t *dva = bp->blk_dva;
2008-11-20 20:01:55 +00:00
int flags = 0;
uint64_t offset = 0, psize = 0, lsize = 0, blkptr_offset = 0;
2008-11-20 20:01:55 +00:00
zio_t *zio;
vdev_t *vd;
abd_t *pabd;
void *lbuf, *buf;
char *s, *p, *dup, *vdev, *flagstr, *sizes;
int i, error;
boolean_t borrowed = B_FALSE, found = B_FALSE;
2008-11-20 20:01:55 +00:00
dup = strdup(thing);
s = strtok(dup, ":");
vdev = s ? s : "";
s = strtok(NULL, ":");
offset = strtoull(s ? s : "", NULL, 16);
sizes = strtok(NULL, ":");
2008-11-20 20:01:55 +00:00
s = strtok(NULL, ":");
flagstr = strdup(s ? s : "");
2008-11-20 20:01:55 +00:00
s = NULL;
if (!zdb_parse_block_sizes(sizes, &lsize, &psize))
s = "invalid size(s)";
if (!IS_P2ALIGNED(psize, DEV_BSIZE) || !IS_P2ALIGNED(lsize, DEV_BSIZE))
2008-11-20 20:01:55 +00:00
s = "size must be a multiple of sector size";
if (!IS_P2ALIGNED(offset, DEV_BSIZE))
s = "offset must be a multiple of sector size";
if (s) {
(void) printf("Invalid block specifier: %s - %s\n", thing, s);
goto done;
2008-11-20 20:01:55 +00:00
}
for (s = strtok(flagstr, ":"); s; s = strtok(NULL, ":")) {
for (i = 0; i < strlen(flagstr); i++) {
2008-11-20 20:01:55 +00:00
int bit = flagbits[(uchar_t)flagstr[i]];
if (bit == 0) {
(void) printf("***Ignoring flag: %c\n",
(uchar_t)flagstr[i]);
2008-11-20 20:01:55 +00:00
continue;
}
found = B_TRUE;
2008-11-20 20:01:55 +00:00
flags |= bit;
p = &flagstr[i + 1];
if (*p != ':' && *p != '\0') {
int j = 0, nextbit = flagbits[(uchar_t)*p];
char *end, offstr[8] = { 0 };
if ((bit == ZDB_FLAG_PRINT_BLKPTR) &&
(nextbit == 0)) {
/* look ahead to isolate the offset */
while (nextbit == 0 &&
strchr(flagbitstr, *p) == NULL) {
offstr[j] = *p;
j++;
if (i + j > strlen(flagstr))
break;
p++;
nextbit = flagbits[(uchar_t)*p];
}
blkptr_offset = strtoull(offstr, &end,
16);
i += j;
} else if (nextbit == 0) {
(void) printf("***Ignoring flag arg:"
" '%c'\n", (uchar_t)*p);
}
2008-11-20 20:01:55 +00:00
}
}
}
if (blkptr_offset % sizeof (blkptr_t)) {
printf("Block pointer offset 0x%llx "
"must be divisible by 0x%x\n",
(longlong_t)blkptr_offset, (int)sizeof (blkptr_t));
goto done;
}
if (found == B_FALSE && strlen(flagstr) > 0) {
printf("Invalid flag arg: '%s'\n", flagstr);
goto done;
}
2008-11-20 20:01:55 +00:00
vd = zdb_vdev_lookup(spa->spa_root_vdev, vdev);
if (vd == NULL) {
(void) printf("***Invalid vdev: %s\n", vdev);
free(dup);
return;
} else {
if (vd->vdev_path)
(void) fprintf(stderr, "Found vdev: %s\n",
vd->vdev_path);
2008-11-20 20:01:55 +00:00
else
(void) fprintf(stderr, "Found vdev type: %s\n",
2008-11-20 20:01:55 +00:00
vd->vdev_ops->vdev_op_type);
}
pabd = abd_alloc_for_io(SPA_MAXBLOCKSIZE, B_FALSE);
lbuf = umem_alloc(SPA_MAXBLOCKSIZE, UMEM_NOFAIL);
BP_ZERO(bp);
2008-11-20 20:01:55 +00:00
DVA_SET_VDEV(&dva[0], vd->vdev_id);
DVA_SET_OFFSET(&dva[0], offset);
DVA_SET_GANG(&dva[0], !!(flags & ZDB_FLAG_GBH));
DVA_SET_ASIZE(&dva[0], vdev_psize_to_asize(vd, psize));
BP_SET_BIRTH(bp, TXG_INITIAL, TXG_INITIAL);
BP_SET_LSIZE(bp, lsize);
BP_SET_PSIZE(bp, psize);
BP_SET_COMPRESS(bp, ZIO_COMPRESS_OFF);
BP_SET_CHECKSUM(bp, ZIO_CHECKSUM_OFF);
BP_SET_TYPE(bp, DMU_OT_NONE);
BP_SET_LEVEL(bp, 0);
BP_SET_DEDUP(bp, 0);
BP_SET_BYTEORDER(bp, ZFS_HOST_BYTEORDER);
2008-11-20 20:01:55 +00:00
spa_config_enter(spa, SCL_STATE, FTAG, RW_READER);
2008-11-20 20:01:55 +00:00
zio = zio_root(spa, NULL, NULL, 0);
if (vd == vd->vdev_top) {
/*
* Treat this as a normal block read.
*/
zio_nowait(zio_read(zio, spa, bp, pabd, psize, NULL, NULL,
ZIO_PRIORITY_SYNC_READ,
ZIO_FLAG_CANFAIL | ZIO_FLAG_RAW, NULL));
} else {
/*
* Treat this as a vdev child I/O.
*/
zio_nowait(zio_vdev_child_io(zio, bp, vd, offset, pabd,
psize, ZIO_TYPE_READ, ZIO_PRIORITY_SYNC_READ,
ZIO_FLAG_DONT_CACHE | ZIO_FLAG_DONT_PROPAGATE |
ZIO_FLAG_DONT_RETRY | ZIO_FLAG_CANFAIL | ZIO_FLAG_RAW |
ZIO_FLAG_OPTIONAL, NULL, NULL));
}
2008-11-20 20:01:55 +00:00
error = zio_wait(zio);
spa_config_exit(spa, SCL_STATE, FTAG);
2008-11-20 20:01:55 +00:00
if (error) {
(void) printf("Read of %s failed, error: %d\n", thing, error);
goto out;
}
uint64_t orig_lsize = lsize;
buf = lbuf;
if (flags & ZDB_FLAG_DECOMPRESS) {
boolean_t failed = zdb_decompress_block(pabd, buf, lbuf,
lsize, psize, flags);
if (failed) {
(void) printf("Decompress of %s failed\n", thing);
goto out;
}
} else {
buf = abd_borrow_buf_copy(pabd, lsize);
borrowed = B_TRUE;
}
/*
* Try to detect invalid block pointer. If invalid, try
* decompressing.
*/
if ((flags & ZDB_FLAG_PRINT_BLKPTR || flags & ZDB_FLAG_INDIRECT) &&
!(flags & ZDB_FLAG_DECOMPRESS)) {
const blkptr_t *b = (const blkptr_t *)(void *)
((uintptr_t)buf + (uintptr_t)blkptr_offset);
if (zfs_blkptr_verify(spa, b, B_FALSE, BLK_VERIFY_ONLY) ==
B_FALSE) {
abd_return_buf_copy(pabd, buf, lsize);
borrowed = B_FALSE;
buf = lbuf;
boolean_t failed = zdb_decompress_block(pabd, buf,
lbuf, lsize, psize, flags);
b = (const blkptr_t *)(void *)
((uintptr_t)buf + (uintptr_t)blkptr_offset);
if (failed || zfs_blkptr_verify(spa, b, B_FALSE,
BLK_VERIFY_LOG) == B_FALSE) {
printf("invalid block pointer at this DVA\n");
goto out;
}
}
}
2008-11-20 20:01:55 +00:00
if (flags & ZDB_FLAG_PRINT_BLKPTR)
zdb_print_blkptr((blkptr_t *)(void *)
((uintptr_t)buf + (uintptr_t)blkptr_offset), flags);
else if (flags & ZDB_FLAG_RAW)
zdb_dump_block_raw(buf, lsize, flags);
2008-11-20 20:01:55 +00:00
else if (flags & ZDB_FLAG_INDIRECT)
zdb_dump_indirect((blkptr_t *)buf,
orig_lsize / sizeof (blkptr_t), flags);
2008-11-20 20:01:55 +00:00
else if (flags & ZDB_FLAG_GBH)
zdb_dump_gbh(buf, flags);
else
zdb_dump_block(thing, buf, lsize, flags);
2008-11-20 20:01:55 +00:00
/*
* If :c was specified, iterate through the checksum table to
* calculate and display each checksum for our specified
* DVA and length.
*/
if ((flags & ZDB_FLAG_CHECKSUM) && !(flags & ZDB_FLAG_RAW) &&
!(flags & ZDB_FLAG_GBH)) {
zio_t *czio;
(void) printf("\n");
for (enum zio_checksum ck = ZIO_CHECKSUM_LABEL;
ck < ZIO_CHECKSUM_FUNCTIONS; ck++) {
if ((zio_checksum_table[ck].ci_flags &
ZCHECKSUM_FLAG_EMBEDDED) ||
ck == ZIO_CHECKSUM_NOPARITY) {
continue;
}
BP_SET_CHECKSUM(bp, ck);
spa_config_enter(spa, SCL_STATE, FTAG, RW_READER);
czio = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL);
czio->io_bp = bp;
if (vd == vd->vdev_top) {
zio_nowait(zio_read(czio, spa, bp, pabd, psize,
NULL, NULL,
ZIO_PRIORITY_SYNC_READ,
ZIO_FLAG_CANFAIL | ZIO_FLAG_RAW |
ZIO_FLAG_DONT_RETRY, NULL));
} else {
zio_nowait(zio_vdev_child_io(czio, bp, vd,
offset, pabd, psize, ZIO_TYPE_READ,
ZIO_PRIORITY_SYNC_READ,
ZIO_FLAG_DONT_CACHE |
ZIO_FLAG_DONT_PROPAGATE |
ZIO_FLAG_DONT_RETRY |
ZIO_FLAG_CANFAIL | ZIO_FLAG_RAW |
ZIO_FLAG_SPECULATIVE |
ZIO_FLAG_OPTIONAL, NULL, NULL));
}
error = zio_wait(czio);
if (error == 0 || error == ECKSUM) {
zio_t *ck_zio = zio_root(spa, NULL, NULL, 0);
ck_zio->io_offset =
DVA_GET_OFFSET(&bp->blk_dva[0]);
ck_zio->io_bp = bp;
zio_checksum_compute(ck_zio, ck, pabd, lsize);
printf("%12s\tcksum=%llx:%llx:%llx:%llx\n",
zio_checksum_table[ck].ci_name,
(u_longlong_t)bp->blk_cksum.zc_word[0],
(u_longlong_t)bp->blk_cksum.zc_word[1],
(u_longlong_t)bp->blk_cksum.zc_word[2],
(u_longlong_t)bp->blk_cksum.zc_word[3]);
zio_wait(ck_zio);
} else {
printf("error %d reading block\n", error);
}
spa_config_exit(spa, SCL_STATE, FTAG);
}
}
if (borrowed)
abd_return_buf_copy(pabd, buf, lsize);
2008-11-20 20:01:55 +00:00
out:
abd_free(pabd);
umem_free(lbuf, SPA_MAXBLOCKSIZE);
done:
free(flagstr);
2008-11-20 20:01:55 +00:00
free(dup);
}
static void
zdb_embedded_block(char *thing)
{
blkptr_t bp;
unsigned long long *words = (void *)&bp;
char *buf;
int err;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
bzero(&bp, sizeof (bp));
err = sscanf(thing, "%llx:%llx:%llx:%llx:%llx:%llx:%llx:%llx:"
"%llx:%llx:%llx:%llx:%llx:%llx:%llx:%llx",
words + 0, words + 1, words + 2, words + 3,
words + 4, words + 5, words + 6, words + 7,
words + 8, words + 9, words + 10, words + 11,
words + 12, words + 13, words + 14, words + 15);
if (err != 16) {
(void) fprintf(stderr, "invalid input format\n");
exit(1);
}
ASSERT3U(BPE_GET_LSIZE(&bp), <=, SPA_MAXBLOCKSIZE);
buf = malloc(SPA_MAXBLOCKSIZE);
if (buf == NULL) {
(void) fprintf(stderr, "out of memory\n");
exit(1);
}
err = decode_embedded_bp(&bp, buf, BPE_GET_LSIZE(&bp));
if (err != 0) {
(void) fprintf(stderr, "decode failed: %u\n", err);
exit(1);
}
zdb_dump_block_raw(buf, BPE_GET_LSIZE(&bp), 0);
free(buf);
}
2008-11-20 20:01:55 +00:00
int
main(int argc, char **argv)
{
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
int c;
2008-11-20 20:01:55 +00:00
struct rlimit rl = { 1024, 1024 };
spa_t *spa = NULL;
2008-11-20 20:01:55 +00:00
objset_t *os = NULL;
int dump_all = 1;
int verbose = 0;
int error = 0;
char **searchdirs = NULL;
int nsearch = 0;
char *target, *target_pool, dsname[ZFS_MAX_DATASET_NAME_LEN];
nvlist_t *policy = NULL;
uint64_t max_txg = UINT64_MAX;
int64_t objset_id = -1;
uint64_t object;
int flags = ZFS_IMPORT_MISSING_LOG;
int rewind = ZPOOL_NEVER_REWIND;
char *spa_config_path_env, *objset_str;
boolean_t target_is_spa = B_TRUE, dataset_lookup = B_FALSE;
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
nvlist_t *cfg = NULL;
2008-11-20 20:01:55 +00:00
(void) setrlimit(RLIMIT_NOFILE, &rl);
(void) enable_extended_FILE_stdio(-1, -1);
dprintf_setup(&argc, argv);
/*
* If there is an environment variable SPA_CONFIG_PATH it overrides
* default spa_config_path setting. If -U flag is specified it will
* override this environment variable settings once again.
*/
spa_config_path_env = getenv("SPA_CONFIG_PATH");
if (spa_config_path_env != NULL)
spa_config_path = spa_config_path_env;
Reduce loaded range tree memory usage This patch implements a new tree structure for ZFS, and uses it to store range trees more efficiently. The new structure is approximately a B-tree, though there are some small differences from the usual characterizations. The tree has core nodes and leaf nodes; each contain data elements, which the elements in the core nodes acting as separators between its children. The difference between core and leaf nodes is that the core nodes have an array of children, while leaf nodes don't. Every node in the tree may be only partially full; in most cases, they are all at least 50% full (in terms of element count) except for the root node, which can be less full. Underfull nodes will steal from their neighbors or merge to remain full enough, while overfull nodes will split in two. The data elements are contained in tree-controlled buffers; they are copied into these on insertion, and overwritten on deletion. This means that the elements are not independently allocated, which reduces overhead, but also means they can't be shared between trees (and also that pointers to them are only valid until a side-effectful tree operation occurs). The overhead varies based on how dense the tree is, but is usually on the order of about 50% of the element size; the per-node overheads are very small, and so don't make a significant difference. The trees can accept arbitrary records; they accept a size and a comparator to allow them to be used for a variety of purposes. The new trees replace the AVL trees used in the range trees today. Currently, the range_seg_t structure contains three 8 byte integers of payload and two 24 byte avl_tree_node_ts to handle its storage in both an offset-sorted tree and a size-sorted tree (total size: 64 bytes). In the new model, the range seg structures are usually two 4 byte integers, but a separate one needs to exist for the size-sorted and offset-sorted tree. Between the raw size, the 50% overhead, and the double storage, the new btrees are expected to use 8*1.5*2 = 24 bytes per record, or 33.3% as much memory as the AVL trees (this is for the purposes of storing metaslab range trees; for other purposes, like scrubs, they use ~50% as much memory). We reduced the size of the payload in the range segments by teaching range trees about starting offsets and shifts; since metaslabs have a fixed starting offset, and they all operate in terms of disk sectors, we can store the ranges using 4-byte integers as long as the size of the metaslab divided by the sector size is less than 2^32. For 512-byte sectors, this is a 2^41 (or 2TB) metaslab, which with the default settings corresponds to a 256PB disk. 4k sector disks can handle metaslabs up to 2^46 bytes, or 2^63 byte disks. Since we do not anticipate disks of this size in the near future, there should be almost no cases where metaslabs need 64-byte integers to store their ranges. We do still have the capability to store 64-byte integer ranges to account for cases where we are storing per-vdev (or per-dnode) trees, which could reasonably go above the limits discussed. We also do not store fill information in the compact version of the node, since it is only used for sorted scrub. We also optimized the metaslab loading process in various other ways to offset some inefficiencies in the btree model. While individual operations (find, insert, remove_from) are faster for the btree than they are for the avl tree, remove usually requires a find operation, while in the AVL tree model the element itself suffices. Some clever changes actually caused an overall speedup in metaslab loading; we use approximately 40% less cpu to load metaslabs in our tests on Illumos. Another memory and performance optimization was achieved by changing what is stored in the size-sorted trees. When a disk is heavily fragmented, the df algorithm used by default in ZFS will almost always find a number of small regions in its initial cursor-based search; it will usually only fall back to the size-sorted tree to find larger regions. If we increase the size of the cursor-based search slightly, and don't store segments that are smaller than a tunable size floor in the size-sorted tree, we can further cut memory usage down to below 20% of what the AVL trees store. This also results in further reductions in CPU time spent loading metaslabs. The 16KiB size floor was chosen because it results in substantial memory usage reduction while not usually resulting in situations where we can't find an appropriate chunk with the cursor and are forced to use an oversized chunk from the size-sorted tree. In addition, even if we do have to use an oversized chunk from the size-sorted tree, the chunk would be too small to use for ZIL allocations, so it isn't as big of a loss as it might otherwise be. And often, more small allocations will follow the initial one, and the cursor search will now find the remainder of the chunk we didn't use all of and use it for subsequent allocations. Practical testing has shown little or no change in fragmentation as a result of this change. If the size-sorted tree becomes empty while the offset sorted one still has entries, it will load all the entries from the offset sorted tree and disregard the size floor until it is unloaded again. This operation occurs rarely with the default setting, only on incredibly thoroughly fragmented pools. There are some other small changes to zdb to teach it to handle btrees, but nothing major. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Sebastien Roy seb@delphix.com Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9181
2019-10-09 17:36:03 +00:00
/*
* For performance reasons, we set this tunable down. We do so before
* the arg parsing section so that the user can override this value if
* they choose.
*/
zfs_btree_verify_intensity = 3;
while ((c = getopt(argc, argv,
"AbcCdDeEFGhiI:klLmMo:Op:PqrRsSt:uU:vVx:XYyZ")) != -1) {
2008-11-20 20:01:55 +00:00
switch (c) {
case 'b':
case 'c':
case 'C':
case 'd':
case 'D':
case 'E':
case 'G':
case 'h':
case 'i':
case 'l':
2009-07-02 22:44:48 +00:00
case 'm':
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
case 'M':
case 'O':
case 'r':
2008-11-20 20:01:55 +00:00
case 'R':
case 's':
case 'S':
case 'u':
Extend zdb to print inconsistencies in livelists and metaslabs Livelists and spacemaps are data structures that are logs of allocations and frees. Livelists entries are block pointers (blkptr_t). Spacemaps entries are ranges of numbers, most often used as to track allocated/freed regions of metaslabs/vdevs. These data structures can become self-inconsistent, for example if a block or range can be "double allocated" (two allocation records without an intervening free) or "double freed" (two free records without an intervening allocation). ZDB (as well as zfs running in the kernel) can detect these inconsistencies when loading livelists and metaslab. However, it generally halts processing when the error is detected. When analyzing an on-disk problem, we often want to know the entire set of inconsistencies, which is not possible with the current behavior. This commit adds a new flag, `zdb -y`, which analyzes the livelist and metaslab data structures and displays all of their inconsistencies. Note that this is different from the leak detection performed by `zdb -b`, which checks for inconsistencies between the spacemaps and the tree of block pointers, but assumes the spacemaps are self-consistent. The specific checks added are: Verify livelists by iterating through each sublivelists and: - report leftover FREEs - report double ALLOCs and double FREEs - record leftover ALLOCs together with their TXG [see Cross Check] Verify spacemaps by iterating over each metaslab and: - iterate over spacemap and then the metaslab's entries in the spacemap log, then report any double FREEs and double ALLOCs Verify that livelists are consistenet with spacemaps. The space referenced by livelists (after using the FREE's to cancel out corresponding ALLOCs) should be allocated, according to the spacemaps. Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> External-issue: DLPX-66031 Closes #10515
2020-07-15 00:51:05 +00:00
case 'y':
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
case 'Z':
2008-11-20 20:01:55 +00:00
dump_opt[c]++;
dump_all = 0;
break;
case 'A':
case 'e':
case 'F':
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
case 'k':
2009-01-15 21:59:39 +00:00
case 'L':
case 'P':
case 'q':
case 'X':
2009-01-15 21:59:39 +00:00
dump_opt[c]++;
break;
ztest: split block reconstruction Increase the default allowed number of reconstruction attempts. There's not an exact right number for this setting. It needs to be set large enough to cover any realistic failure scenarios and small enough to avoid stalling the IO pipeline and invoking the dead man detection. The current value of 256 was empirically determined to be too low based on multi-day runs of ztest. The fault injection code would inject more damage than could be reconstructed given the relatively small number of attempts. However, in all observed cases the block could be reconstructed using a slightly higher limit. Based on local testing increasing the default value to 4096 was determined to strike the best balance. Checking all combinations takes less than 10s in the worst case, and has so far eliminated the vast majority of false positives detected by ztest. This delay is roughly on par with how long retries may be performed to a misbehaving HDD and was deemed to be reasonable. Better to err on the side of a brief delay rather than fail to reconstruct the data. Lastly, the -Y flag has been added to zdb to make it easy to try all possible combinations when performing split block reconstruction. For badly damaged blocks with 18 splits, they can be fully enumerated within a few minutes. This has been done to ensure permanent errors are never incorrectly reported when ztest verifies the pool with zdb. Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8271
2019-01-16 22:10:02 +00:00
case 'Y':
zfs_reconstruct_indirect_combinations_max = INT_MAX;
zfs_deadman_enabled = 0;
break;
/* NB: Sort single match options below. */
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
case 'I':
max_inflight_bytes = strtoull(optarg, NULL, 0);
if (max_inflight_bytes == 0) {
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
(void) fprintf(stderr, "maximum number "
"of inflight bytes must be greater "
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
"than 0\n");
usage();
}
break;
case 'o':
error = set_global_var(optarg);
if (error != 0)
usage();
break;
2008-11-20 20:01:55 +00:00
case 'p':
if (searchdirs == NULL) {
searchdirs = umem_alloc(sizeof (char *),
UMEM_NOFAIL);
} else {
char **tmp = umem_alloc((nsearch + 1) *
sizeof (char *), UMEM_NOFAIL);
bcopy(searchdirs, tmp, nsearch *
sizeof (char *));
umem_free(searchdirs,
nsearch * sizeof (char *));
searchdirs = tmp;
}
searchdirs[nsearch++] = optarg;
2008-11-20 20:01:55 +00:00
break;
2009-01-15 21:59:39 +00:00
case 't':
max_txg = strtoull(optarg, NULL, 0);
if (max_txg < TXG_INITIAL) {
2009-01-15 21:59:39 +00:00
(void) fprintf(stderr, "incorrect txg "
"specified: %s\n", optarg);
usage();
}
break;
case 'U':
spa_config_path = optarg;
if (spa_config_path[0] != '/') {
(void) fprintf(stderr,
"cachefile must be an absolute path "
"(i.e. start with a slash)\n");
usage();
}
break;
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
case 'v':
verbose++;
break;
case 'V':
flags = ZFS_IMPORT_VERBATIM;
break;
case 'x':
vn_dumpdir = optarg;
break;
2008-11-20 20:01:55 +00:00
default:
usage();
break;
}
}
if (!dump_opt['e'] && searchdirs != NULL) {
(void) fprintf(stderr, "-p option requires use of -e\n");
usage();
}
if (dump_opt['d'] || dump_opt['r']) {
/* <pool>[/<dataset | objset id> is accepted */
if (argv[2] && (objset_str = strchr(argv[2], '/')) != NULL &&
objset_str++ != NULL) {
char *endptr;
errno = 0;
objset_id = strtoull(objset_str, &endptr, 0);
/* dataset 0 is the same as opening the pool */
if (errno == 0 && endptr != objset_str &&
objset_id != 0) {
target_is_spa = B_FALSE;
dataset_lookup = B_TRUE;
} else if (objset_id != 0) {
printf("failed to open objset %s "
"%llu %s", objset_str,
(u_longlong_t)objset_id,
strerror(errno));
exit(1);
}
/* normal dataset name not an objset ID */
if (endptr == objset_str) {
objset_id = -1;
}
}
}
2008-11-20 20:01:55 +00:00
#if defined(_LP64)
/*
* ZDB does not typically re-read blocks; therefore limit the ARC
* to 256 MB, which can be used entirely for metadata.
*/
zfs_arc_min = zfs_arc_meta_min = 2ULL << SPA_MAXBLOCKSHIFT;
zfs_arc_max = zfs_arc_meta_limit = 256 * 1024 * 1024;
#endif
/*
* "zdb -c" uses checksum-verifying scrub i/os which are async reads.
* "zdb -b" uses traversal prefetch which uses async reads.
* For good performance, let several of them be active at once.
*/
zfs_vdev_async_read_max_active = 10;
/*
* Disable reference tracking for better performance.
*/
reference_tracking_enable = B_FALSE;
/*
* Do not fail spa_load when spa_load_verify fails. This is needed
* to load non-idle pools.
*/
spa_load_verify_dryrun = B_TRUE;
kernel_init(SPA_MODE_READ);
2008-11-20 20:01:55 +00:00
if (dump_all)
verbose = MAX(verbose, 1);
2008-11-20 20:01:55 +00:00
for (c = 0; c < 256; c++) {
if (dump_all && strchr("AeEFklLOPrRSXy", c) == NULL)
2008-11-20 20:01:55 +00:00
dump_opt[c] = 1;
if (dump_opt[c])
dump_opt[c] += verbose;
}
aok = (dump_opt['A'] == 1) || (dump_opt['A'] > 2);
zfs_recover = (dump_opt['A'] > 1);
2008-11-20 20:01:55 +00:00
argc -= optind;
argv += optind;
if (argc < 2 && dump_opt['R'])
usage();
if (dump_opt['E']) {
if (argc != 1)
usage();
zdb_embedded_block(argv[0]);
return (0);
}
2008-11-20 20:01:55 +00:00
if (argc < 1) {
if (!dump_opt['e'] && dump_opt['C']) {
dump_cachefile(spa_config_path);
2008-11-20 20:01:55 +00:00
return (0);
}
usage();
}
if (dump_opt['l'])
return (dump_label(argv[0]));
2008-11-20 20:01:55 +00:00
if (dump_opt['O']) {
if (argc != 2)
usage();
dump_opt['v'] = verbose + 3;
return (dump_path(argv[0], argv[1], NULL));
}
if (dump_opt['r']) {
if (argc != 3)
usage();
dump_opt['v'] = verbose;
error = dump_path(argv[0], argv[1], &object);
}
if (dump_opt['X'] || dump_opt['F'])
rewind = ZPOOL_DO_REWIND |
(dump_opt['X'] ? ZPOOL_EXTREME_REWIND : 0);
2008-11-20 20:01:55 +00:00
if (nvlist_alloc(&policy, NV_UNIQUE_NAME_TYPE, 0) != 0 ||
nvlist_add_uint64(policy, ZPOOL_LOAD_REQUEST_TXG, max_txg) != 0 ||
nvlist_add_uint32(policy, ZPOOL_LOAD_REWIND_POLICY, rewind) != 0)
fatal("internal error: %s", strerror(ENOMEM));
2008-11-20 20:01:55 +00:00
error = 0;
target = argv[0];
2008-11-20 20:01:55 +00:00
if (strpbrk(target, "/@") != NULL) {
size_t targetlen;
target_pool = strdup(target);
*strpbrk(target_pool, "/@") = '\0';
target_is_spa = B_FALSE;
targetlen = strlen(target);
if (targetlen && target[targetlen - 1] == '/')
target[targetlen - 1] = '\0';
} else {
target_pool = target;
}
if (dump_opt['e']) {
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
importargs_t args = { 0 };
2008-11-20 20:01:55 +00:00
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
args.paths = nsearch;
args.path = searchdirs;
args.can_be_active = B_TRUE;
error = zpool_find_config(NULL, target_pool, &cfg, &args,
&libzpool_config_ops);
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
if (error == 0) {
if (nvlist_add_nvlist(cfg,
ZPOOL_LOAD_POLICY, policy) != 0) {
fatal("can't open '%s': %s",
target, strerror(ENOMEM));
}
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
if (dump_opt['C'] > 1) {
(void) printf("\nConfiguration for import:\n");
dump_nvlist(cfg, 8);
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
/*
* Disable the activity check to allow examination of
* active pools.
*/
error = spa_import(target_pool, cfg, NULL,
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
flags | ZFS_IMPORT_SKIP_MMP);
2008-11-20 20:01:55 +00:00
}
}
if (searchdirs != NULL) {
umem_free(searchdirs, nsearch * sizeof (char *));
searchdirs = NULL;
}
/*
* import_checkpointed_state makes the assumption that the
* target pool that we pass it is already part of the spa
* namespace. Because of that we need to make sure to call
* it always after the -e option has been processed, which
* imports the pool to the namespace if it's not in the
* cachefile.
*/
char *checkpoint_pool = NULL;
char *checkpoint_target = NULL;
if (dump_opt['k']) {
checkpoint_pool = import_checkpointed_state(target, cfg,
&checkpoint_target);
if (checkpoint_target != NULL)
target = checkpoint_target;
}
if (cfg != NULL) {
nvlist_free(cfg);
cfg = NULL;
}
if (target_pool != target)
free(target_pool);
if (error == 0) {
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
if (dump_opt['k'] && (target_is_spa || dump_opt['R'])) {
ASSERT(checkpoint_pool != NULL);
ASSERT(checkpoint_target == NULL);
error = spa_open(checkpoint_pool, &spa, FTAG);
if (error != 0) {
fatal("Tried to open pool \"%s\" but "
"spa_open() failed with error %d\n",
checkpoint_pool, error);
}
} else if (target_is_spa || dump_opt['R'] || objset_id == 0) {
zdb_set_skip_mmp(target);
error = spa_open_rewind(target, &spa, FTAG, policy,
NULL);
if (error) {
/*
* If we're missing the log device then
* try opening the pool after clearing the
* log state.
*/
mutex_enter(&spa_namespace_lock);
if ((spa = spa_lookup(target)) != NULL &&
spa->spa_log_state == SPA_LOG_MISSING) {
spa->spa_log_state = SPA_LOG_CLEAR;
error = 0;
}
mutex_exit(&spa_namespace_lock);
if (!error) {
error = spa_open_rewind(target, &spa,
FTAG, policy, NULL);
}
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
} else if (strpbrk(target, "#") != NULL) {
dsl_pool_t *dp;
error = dsl_pool_hold(target, FTAG, &dp);
if (error != 0) {
fatal("can't dump '%s': %s", target,
strerror(error));
}
error = dump_bookmark(dp, target, B_TRUE, verbose > 1);
dsl_pool_rele(dp, FTAG);
if (error != 0) {
fatal("can't dump '%s': %s", target,
strerror(error));
}
return (error);
} else {
zdb_set_skip_mmp(target);
if (dataset_lookup == B_TRUE) {
/*
* Use the supplied id to get the name
* for open_objset.
*/
error = spa_open(target, &spa, FTAG);
if (error == 0) {
error = name_from_objset_id(spa,
objset_id, dsname);
spa_close(spa, FTAG);
if (error == 0)
target = dsname;
}
}
if (error == 0)
error = open_objset(target, FTAG, &os);
if (error == 0)
spa = dmu_objset_spa(os);
}
2008-11-20 20:01:55 +00:00
}
nvlist_free(policy);
2008-11-20 20:01:55 +00:00
if (error)
fatal("can't open '%s': %s", target, strerror(error));
2008-11-20 20:01:55 +00:00
/*
* Set the pool failure mode to panic in order to prevent the pool
* from suspending. A suspended I/O will have no way to resume and
* can prevent the zdb(8) command from terminating as expected.
*/
if (spa != NULL)
spa->spa_failmode = ZIO_FAILURE_MODE_PANIC;
2008-11-20 20:01:55 +00:00
argv++;
argc--;
if (dump_opt['r']) {
error = zdb_copy_object(os, object, argv[1]);
} else if (!dump_opt['R']) {
2020-01-24 19:00:46 +00:00
flagbits['d'] = ZOR_FLAG_DIRECTORY;
flagbits['f'] = ZOR_FLAG_PLAIN_FILE;
flagbits['m'] = ZOR_FLAG_SPACE_MAP;
flagbits['z'] = ZOR_FLAG_ZAP;
flagbits['A'] = ZOR_FLAG_ALL_TYPES;
if (argc > 0 && dump_opt['d']) {
zopt_object_args = argc;
zopt_object_ranges = calloc(zopt_object_args,
sizeof (zopt_object_range_t));
for (unsigned i = 0; i < zopt_object_args; i++) {
int err;
char *msg = NULL;
err = parse_object_range(argv[i],
&zopt_object_ranges[i], &msg);
if (err != 0)
fatal("Bad object or range: '%s': %s\n",
argv[i], msg ? msg : "");
}
} else if (argc > 0 && dump_opt['m']) {
zopt_metaslab_args = argc;
zopt_metaslab = calloc(zopt_metaslab_args,
sizeof (uint64_t));
for (unsigned i = 0; i < zopt_metaslab_args; i++) {
errno = 0;
2020-01-24 19:00:46 +00:00
zopt_metaslab[i] = strtoull(argv[i], NULL, 0);
if (zopt_metaslab[i] == 0 && errno != 0)
fatal("bad number %s: %s", argv[i],
strerror(errno));
}
2008-11-20 20:01:55 +00:00
}
if (os != NULL) {
dump_objset(os);
2020-01-24 19:00:46 +00:00
} else if (zopt_object_args > 0 && !dump_opt['m']) {
dump_objset(spa->spa_meta_objset);
} else {
dump_zpool(spa);
}
2008-11-20 20:01:55 +00:00
} else {
flagbits['b'] = ZDB_FLAG_PRINT_BLKPTR;
flagbits['c'] = ZDB_FLAG_CHECKSUM;
flagbits['d'] = ZDB_FLAG_DECOMPRESS;
flagbits['e'] = ZDB_FLAG_BSWAP;
flagbits['g'] = ZDB_FLAG_GBH;
flagbits['i'] = ZDB_FLAG_INDIRECT;
flagbits['r'] = ZDB_FLAG_RAW;
flagbits['v'] = ZDB_FLAG_VERBOSE;
OpenZFS 8081 - Compiler warnings in zdb Fix compiler warnings in zdb. With these changes, FreeBSD can compile zdb with all compiler warnings enabled save -Wunused-parameter. usr/src/cmd/zdb/zdb.c usr/src/cmd/zdb/zdb_il.c usr/src/uts/common/fs/zfs/sys/sa.h usr/src/uts/common/fs/zfs/sys/spa.h Fix numerous warnings, including: * const-correctness * shadowing global definitions * signed vs unsigned comparisons * missing prototypes, or missing static declarations * unused variables and functions * Unreadable array initializations * Missing struct initializers usr/src/cmd/zdb/zdb.h Add a header file to declare common symbols usr/src/lib/libzpool/common/sys/zfs_context.h usr/src/uts/common/fs/zfs/arc.c usr/src/uts/common/fs/zfs/dbuf.c usr/src/uts/common/fs/zfs/spa.c usr/src/uts/common/fs/zfs/txg.c Add a function prototype for zk_thread_create, and ensure that every callback supplied to this function actually matches the prototype. usr/src/cmd/ztest/ztest.c usr/src/uts/common/fs/zfs/sys/zil.h usr/src/uts/common/fs/zfs/zfs_replay.c usr/src/uts/common/fs/zfs/zvol.c Add a function prototype for zil_replay_func_t, and ensure that every function of this type actually matches the prototype. usr/src/uts/common/fs/zfs/sys/refcount.h Change FTAG so it discards any constness of __func__, necessary since existing APIs expect it passed as void *. Porting Notes: - Many of these fixes have already been applied to Linux. For consistency the OpenZFS version of a change was applied if the warning was addressed in an equivalent but different fashion. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Authored by: Alan Somers <asomers@gmail.com> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/8081 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/843abe1b8a Closes #6787
2017-10-27 19:46:35 +00:00
for (int i = 0; i < argc; i++)
zdb_read_block(argv[i], spa);
2008-11-20 20:01:55 +00:00
}
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
if (dump_opt['k']) {
free(checkpoint_pool);
if (!target_is_spa)
free(checkpoint_target);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
if (os != NULL) {
close_objset(os, FTAG);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
} else {
spa_close(spa, FTAG);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
}
2008-11-20 20:01:55 +00:00
fuid_table_destroy();
dump_debug_buffer();
2008-11-20 20:01:55 +00:00
kernel_fini();
OpenZFS 9421, 9422 - zdb show possibly leaked objects 9421 zdb should detect and print out the number of "leaked" objects 9422 zfs diff and zdb should explicitly mark objects that are on the deleted queue It is possible for zfs to "leak" objects in such a way that they are not freed, but are also not accessible via the POSIX interface. As the only way to know that this is happened is to see one of them directly in a zdb run, or by noting unaccounted space usage, zdb should be enhanced to count these objects and return failure if some are detected. We have access to the delete queue through the zfs_get_deleteq function; we should call it in dump_znode to determine if the object is on the delete queue. This is not the most efficient possible method, but it is the simplest to implement, and should suffice for the common case where there few objects on the delete queue. Also zfs diff and zdb currently traverse every single dnode in a dataset and tries to figure out the path of the object by following it's parent. When an object is placed on the delete queue, for all practical purposes it's already discarded, it's parent might not exist anymore, and another object might now have the object number that belonged to the parent. While all of the above makes sense, when trying to figure out the path of an object that is on the delete queue, we can run into issues where either it is impossible to determine the path because the parent is gone, or another dnode has taken it's place and thus we are returned a wrong path. We should therefore avoid trying to determine the path of an object on the delete queue and mark the object itself as being on the delete queue to avoid confusion. To achieve this, we currently have two ideas: 1. When putting an object on the delete queue, change it's parent object number to a known constant that means NULL. 2. When displaying objects, first check if it is present on the delete queue. Authored by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Matt Ahrens <matt@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Approved by: Matt Ahrens <mahrens@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://illumos.org/issues/9421 OpenZFS-issue: https://illumos.org/issues/9422 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45ae0dd9ca Closes #7500
2017-07-06 17:35:20 +00:00
return (error);
2008-11-20 20:01:55 +00:00
}