Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/tests/runfiles/common.run

901 lines
37 KiB
Plaintext
Raw Normal View History

Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
[DEFAULT]
pre = setup
quiet = False
pre_user = root
user = root
timeout = 600
post_user = root
post = cleanup
ZTS: Add a failsafe callback to run after each test Tests that get killed do not have an opportunity to clean up. There are many bad states this can leave the system in, but of particular gravity is when zinject has been used to induce bad behavior for one or more of the test disks. Create a failsafe mechanism in test-runner.py that runs a callback script after every test. The script is common to all tests so all tests benefit from the protection. Add an obligatory `zinject -c all` to clear all zinject state after every test case is run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10096
2020-03-10 18:00:56 +00:00
failsafe_user = root
failsafe = callbacks/zfs_failsafe
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
outputdir = /var/tmp/test_results
tags = ['functional']
[tests/functional/alloc_class]
tests = ['alloc_class_001_pos', 'alloc_class_002_neg', 'alloc_class_003_pos',
'alloc_class_004_pos', 'alloc_class_005_pos', 'alloc_class_006_pos',
'alloc_class_007_pos', 'alloc_class_008_pos', 'alloc_class_009_pos',
'alloc_class_010_pos', 'alloc_class_011_neg', 'alloc_class_012_pos',
'alloc_class_013_pos']
tags = ['functional', 'alloc_class']
[tests/functional/atime]
ZTS: Move atime_003 to linux.run This test verifies relatime behavior, which is only present on Linux. Move the test to linux.run Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10046
2020-02-25 23:27:41 +00:00
tests = ['atime_001_pos', 'atime_002_neg', 'root_atime_off', 'root_atime_on']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'atime']
[tests/functional/bootfs]
tests = ['bootfs_001_pos', 'bootfs_002_neg', 'bootfs_003_pos',
'bootfs_004_neg', 'bootfs_005_neg', 'bootfs_006_pos', 'bootfs_007_pos',
'bootfs_008_pos']
tags = ['functional', 'bootfs']
Tests for btree implementation used by range trees Additional test cases for the btree implementation, see #9181. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: John Kennedy <john.kennedy@delphix.com> Closes #9717
2019-12-19 19:53:55 +00:00
[tests/functional/btree]
tests = ['btree_positive', 'btree_negative']
tags = ['functional', 'btree']
pre =
post =
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/cache]
tests = ['cache_001_pos', 'cache_002_pos', 'cache_003_pos', 'cache_004_neg',
'cache_005_neg', 'cache_006_pos', 'cache_007_neg', 'cache_008_neg',
ZTS: Fix and change testcase cache_010_neg Commit 379ca9c removed the requirement on aux devices to be block devices only but the test case cache_010_neg was not updated, making it fail consistently. This change changes the test to check that cache devices _can_ be anything that presents a block interface. The testcase is renamed to cache_010_pos and the exceptions for known failure removed from the test runner. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reported-by: Richard Elling <Richard.Elling@RichardElling.com> Signed-off-by: Alex John <alex@stty.io> Closes #10172
2020-04-13 17:50:41 +00:00
'cache_009_pos', 'cache_010_pos', 'cache_011_pos', 'cache_012_pos']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'cache']
[tests/functional/cachefile]
tests = ['cachefile_001_pos', 'cachefile_002_pos', 'cachefile_003_pos',
'cachefile_004_pos']
tags = ['functional', 'cachefile']
[tests/functional/casenorm]
tests = ['case_all_values', 'norm_all_values', 'mixed_create_failure',
'sensitive_none_lookup', 'sensitive_none_delete',
'sensitive_formd_lookup', 'sensitive_formd_delete',
'insensitive_none_lookup', 'insensitive_none_delete',
'insensitive_formd_lookup', 'insensitive_formd_delete',
'mixed_none_lookup', 'mixed_none_lookup_ci', 'mixed_none_delete',
'mixed_formd_lookup', 'mixed_formd_lookup_ci', 'mixed_formd_delete']
tags = ['functional', 'casenorm']
[tests/functional/channel_program/lua_core]
tests = ['tst.args_to_lua', 'tst.divide_by_zero', 'tst.exists',
'tst.integer_illegal', 'tst.integer_overflow', 'tst.language_functions_neg',
'tst.language_functions_pos', 'tst.large_prog', 'tst.libraries',
'tst.memory_limit', 'tst.nested_neg', 'tst.nested_pos', 'tst.nvlist_to_lua',
'tst.recursive_neg', 'tst.recursive_pos', 'tst.return_large',
'tst.return_nvlist_neg', 'tst.return_nvlist_pos',
Fix lua stack overflow on recursive call to gsub() The `zfs program` subcommand invokes a LUA interpreter to run ZFS "channel programs". This interpreter runs in a constrained environment, with defined memory limits. The LUA stack (used for LUA functions that call each other) is allocated in the kernel's heap, and is limited by the `-m MEMORY-LIMIT` flag and the `zfs_lua_max_memlimit` module parameter. The C stack is used by certain LUA features that are implemented in C. The C stack is limited by `LUAI_MAXCCALLS=20`, which limits call depth. Some LUA C calls use more stack space than others, and `gsub()` uses an unusually large amount. With a programming trick, it can be invoked recursively using the C stack (rather than the LUA stack). This overflows the 16KB Linux kernel stack after about 11 iterations, less than the limit of 20. One solution would be to decrease `LUAI_MAXCCALLS`. This could be made to work, but it has a few drawbacks: 1. The existing test suite does not pass with `LUAI_MAXCCALLS=10`. 2. There may be other LUA functions that use a lot of stack space, and the stack space may change depending on compiler version and options. This commit addresses the problem by adding a new limit on the amount of free space (in bytes) remaining on the C stack while running the LUA interpreter: `LUAI_MINCSTACK=4096`. If there is less than this amount of stack space remaining, a LUA runtime error is generated. Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Allan Jude <allanjude@freebsd.org> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #10611 Closes #10613
2020-07-27 23:11:47 +00:00
'tst.return_recursive_table', 'tst.stack_gsub', 'tst.timeout']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'channel_program', 'lua_core']
[tests/functional/channel_program/synctask_core]
tests = ['tst.destroy_fs', 'tst.destroy_snap', 'tst.get_count_and_limit',
'tst.get_index_props', 'tst.get_mountpoint', 'tst.get_neg',
'tst.get_number_props', 'tst.get_string_props', 'tst.get_type',
Support inheriting properties in channel programs This adds support in channel programs to inherit properties analogous to `zfs inherit` by adding `zfs.sync.inherit` and `zfs.check.inherit` functions to the ZFS LUA API. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Jason King <jason.king@joyent.com> Closes #9738
2020-01-23 01:03:17 +00:00
'tst.get_userquota', 'tst.get_written', 'tst.inherit', 'tst.list_bookmarks',
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
'tst.list_children', 'tst.list_clones', 'tst.list_holds',
'tst.list_snapshots', 'tst.list_system_props',
'tst.list_user_props', 'tst.parse_args_neg','tst.promote_conflict',
'tst.promote_multiple', 'tst.promote_simple', 'tst.rollback_mult',
Support setting user properties in a channel program This adds support for setting user properties in a zfs channel program by adding 'zfs.sync.set_prop' and 'zfs.check.set_prop' to the ZFS LUA API. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matt Ahrens <matt@delphix.com> Co-authored-by: Sara Hartse <sara.hartse@delphix.com> Contributions-by: Jason King <jason.king@joyent.com> Signed-off-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Jason King <jason.king@joyent.com> Closes #9950
2020-02-14 21:41:42 +00:00
'tst.rollback_one', 'tst.set_props', 'tst.snapshot_destroy', 'tst.snapshot_neg',
Implement bookmark copying This feature allows copying existing bookmarks using zfs bookmark fs#target fs#newbookmark There are some niche use cases for such functionality, e.g. when using bookmarks as markers for replication progress. Copying redaction bookmarks produces a normal bookmark that cannot be used for redacted send (we are not duplicating the redaction object). ZCP support for bookmarking (both creation and copying) will be implemented in a separate patch based on this work. Overview: - Terminology: - source = existing snapshot or bookmark - new/bmark = new bookmark - Implement bookmark copying in `dsl_bookmark.c` - create new bookmark node - copy source's `zbn_phys` to new's `zbn_phys` - zero-out redaction object id in copy - Extend existing bookmark ioctl nvlist schema to accept bookmarks as sources - => `dsl_bookmark_create_nvl_validate` is authoritative - use `dsl_dataset_is_before` check for both snapshot and bookmark sources - Adjust CLI - refactor shortname expansion logic in `zfs_do_bookmark` - Update man pages - warn about redaction bookmark handling - Add test cases - CLI - pyyzfs libzfs_core bindings Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Christian Schwarz <me@cschwarz.com> Closes #9571
2019-11-11 07:24:14 +00:00
'tst.snapshot_recursive', 'tst.snapshot_simple',
zcp: add zfs.sync.bookmark Add support for bookmark creation and cloning. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Christian Schwarz <me@cschwarz.com> Closes #9571
2020-01-16 01:15:05 +00:00
'tst.bookmark.create', 'tst.bookmark.copy',
Implement bookmark copying This feature allows copying existing bookmarks using zfs bookmark fs#target fs#newbookmark There are some niche use cases for such functionality, e.g. when using bookmarks as markers for replication progress. Copying redaction bookmarks produces a normal bookmark that cannot be used for redacted send (we are not duplicating the redaction object). ZCP support for bookmarking (both creation and copying) will be implemented in a separate patch based on this work. Overview: - Terminology: - source = existing snapshot or bookmark - new/bmark = new bookmark - Implement bookmark copying in `dsl_bookmark.c` - create new bookmark node - copy source's `zbn_phys` to new's `zbn_phys` - zero-out redaction object id in copy - Extend existing bookmark ioctl nvlist schema to accept bookmarks as sources - => `dsl_bookmark_create_nvl_validate` is authoritative - use `dsl_dataset_is_before` check for both snapshot and bookmark sources - Adjust CLI - refactor shortname expansion logic in `zfs_do_bookmark` - Update man pages - warn about redaction bookmark handling - Add test cases - CLI - pyyzfs libzfs_core bindings Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Christian Schwarz <me@cschwarz.com> Closes #9571
2019-11-11 07:24:14 +00:00
'tst.terminate_by_signal'
]
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'channel_program', 'synctask_core']
[tests/functional/checksum]
Disable EDONR on FreeBSD FreeBSD uses its own crypto framework in-kernel which, at this time, has no EDONR implementation. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Allan Jude <allanjude@freebsd.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9664
2019-12-05 21:10:29 +00:00
tests = ['run_sha2_test', 'run_skein_test', 'filetest_001_pos']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'checksum']
[tests/functional/clean_mirror]
tests = [ 'clean_mirror_001_pos', 'clean_mirror_002_pos',
'clean_mirror_003_pos', 'clean_mirror_004_pos']
tags = ['functional', 'clean_mirror']
[tests/functional/cli_root/zdb]
Add more sanity testing for zdb input args Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: sara hartse <sara.hartse@delphix.com> Closes #10243
2020-04-28 16:56:31 +00:00
tests = ['zdb_002_pos', 'zdb_003_pos', 'zdb_004_pos', 'zdb_005_pos',
Add block histogram to zdb The block histogram tracks the changes to psize, lsize and asize both in the count of the number of blocks (by blocksize) and the total length of all of the blocks for that blocksize. It also keeps a running total of the cumulative size of all of the blocks up to each size to help determine the size of caching SSDs to be added to zfs hardware deployments. The block history counts and lengths are summarized in bins which are powers of two. Even rows with counts of zero are printed. This change is accessed by specifying one of two options: zdb -bbb pool zdb -Pbbb pool The first version prints the table in fixed size columns. The second prints in "parseable" output that can be placed into a CSV file. Fixed Column, nicenum output sample: block psize lsize asize size Count Length Cum. Count Length Cum. Count Length Cum. 512: 3.50K 1.75M 1.75M 3.43K 1.71M 1.71M 3.41K 1.71M 1.71M 1K: 3.65K 3.67M 5.43M 3.43K 3.44M 5.15M 3.50K 3.51M 5.22M 2K: 3.45K 6.92M 12.3M 3.41K 6.83M 12.0M 3.59K 7.26M 12.5M 4K: 3.44K 13.8M 26.1M 3.43K 13.7M 25.7M 3.49K 14.1M 26.6M 8K: 3.42K 27.3M 53.5M 3.41K 27.3M 53.0M 3.44K 27.6M 54.2M 16K: 3.43K 54.9M 108M 3.50K 56.1M 109M 3.42K 54.7M 109M 32K: 3.44K 110M 219M 3.41K 109M 218M 3.43K 110M 219M 64K: 3.41K 218M 437M 3.41K 218M 437M 3.44K 221M 439M 128K: 3.41K 437M 874M 3.70K 474M 911M 3.41K 437M 876M 256K: 3.41K 874M 1.71G 3.41K 874M 1.74G 3.41K 874M 1.71G 512K: 3.41K 1.71G 3.41G 3.41K 1.71G 3.45G 3.41K 1.71G 3.42G 1M: 3.41K 3.41G 6.82G 3.41K 3.41G 6.86G 3.41K 3.41G 6.83G 2M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 4M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 8M: 0 0 6.82G 0 0 6.86G 0 0 6.83G 16M: 0 0 6.82G 0 0 6.86G 0 0 6.83G Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Robert E. Novak <novak5@llnl.gov> Closes: #9158 Closes #10315
2020-06-26 22:09:20 +00:00
'zdb_006_pos', 'zdb_args_neg', 'zdb_args_pos',
'zdb_block_size_histogram', 'zdb_checksum', 'zdb_decompress',
'zdb_display_block', 'zdb_object_range_neg', 'zdb_object_range_pos',
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
'zdb_objset_id', 'zdb_decompress_zstd']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
pre =
post =
tags = ['functional', 'cli_root', 'zdb']
[tests/functional/cli_root/zfs]
tests = ['zfs_001_neg', 'zfs_002_pos']
tags = ['functional', 'cli_root', 'zfs']
[tests/functional/cli_root/zfs_bookmark]
tests = ['zfs_bookmark_cliargs']
tags = ['functional', 'cli_root', 'zfs_bookmark']
[tests/functional/cli_root/zfs_change-key]
tests = ['zfs_change-key', 'zfs_change-key_child', 'zfs_change-key_format',
'zfs_change-key_inherit', 'zfs_change-key_load', 'zfs_change-key_location',
'zfs_change-key_pbkdf2iters', 'zfs_change-key_clones']
tags = ['functional', 'cli_root', 'zfs_change-key']
[tests/functional/cli_root/zfs_clone]
tests = ['zfs_clone_001_neg', 'zfs_clone_002_pos', 'zfs_clone_003_pos',
'zfs_clone_004_pos', 'zfs_clone_005_pos', 'zfs_clone_006_pos',
'zfs_clone_007_pos', 'zfs_clone_008_neg', 'zfs_clone_009_neg',
'zfs_clone_010_pos', 'zfs_clone_encrypted', 'zfs_clone_deeply_nested']
tags = ['functional', 'cli_root', 'zfs_clone']
[tests/functional/cli_root/zfs_copies]
tests = ['zfs_copies_001_pos', 'zfs_copies_002_pos', 'zfs_copies_003_pos',
'zfs_copies_004_neg', 'zfs_copies_005_neg', 'zfs_copies_006_pos']
tags = ['functional', 'cli_root', 'zfs_copies']
[tests/functional/cli_root/zfs_create]
tests = ['zfs_create_001_pos', 'zfs_create_002_pos', 'zfs_create_003_pos',
'zfs_create_004_pos', 'zfs_create_005_pos', 'zfs_create_006_pos',
'zfs_create_007_pos', 'zfs_create_008_neg', 'zfs_create_009_neg',
'zfs_create_010_neg', 'zfs_create_011_pos', 'zfs_create_012_pos',
'zfs_create_013_pos', 'zfs_create_014_pos', 'zfs_create_encrypted',
'zfs_create_crypt_combos', 'zfs_create_dryrun', 'zfs_create_verbose']
tags = ['functional', 'cli_root', 'zfs_create']
[tests/functional/cli_root/zfs_destroy]
tests = ['zfs_clone_livelist_condense_and_disable',
'zfs_clone_livelist_condense_races', 'zfs_destroy_001_pos',
'zfs_destroy_002_pos', 'zfs_destroy_003_pos',
'zfs_destroy_004_pos', 'zfs_destroy_005_neg', 'zfs_destroy_006_neg',
'zfs_destroy_007_neg', 'zfs_destroy_008_pos', 'zfs_destroy_009_pos',
'zfs_destroy_010_pos', 'zfs_destroy_011_pos', 'zfs_destroy_012_pos',
'zfs_destroy_013_neg', 'zfs_destroy_014_pos', 'zfs_destroy_015_pos',
'zfs_destroy_016_pos', 'zfs_destroy_clone_livelist',
'zfs_destroy_dev_removal', 'zfs_destroy_dev_removal_condense']
tags = ['functional', 'cli_root', 'zfs_destroy']
[tests/functional/cli_root/zfs_diff]
tests = ['zfs_diff_changes', 'zfs_diff_cliargs', 'zfs_diff_timestamp',
'zfs_diff_types', 'zfs_diff_encrypted']
tags = ['functional', 'cli_root', 'zfs_diff']
[tests/functional/cli_root/zfs_get]
tests = ['zfs_get_001_pos', 'zfs_get_002_pos', 'zfs_get_003_pos',
'zfs_get_004_pos', 'zfs_get_005_neg', 'zfs_get_006_neg', 'zfs_get_007_neg',
'zfs_get_008_pos', 'zfs_get_009_pos', 'zfs_get_010_neg']
tags = ['functional', 'cli_root', 'zfs_get']
Small program that converts a dataset id and an object id to a path Small program that converts a dataset id and an object id to a path Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #10204
2020-05-20 17:05:33 +00:00
[tests/functional/cli_root/zfs_ids_to_path]
tests = ['zfs_ids_to_path_001_pos']
tags = ['functional', 'cli_root', 'zfs_ids_to_path']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/cli_root/zfs_inherit]
tests = ['zfs_inherit_001_neg', 'zfs_inherit_002_neg', 'zfs_inherit_003_pos',
'zfs_inherit_mountpoint']
tags = ['functional', 'cli_root', 'zfs_inherit']
[tests/functional/cli_root/zfs_load-key]
tests = ['zfs_load-key', 'zfs_load-key_all', 'zfs_load-key_file',
'zfs_load-key_location', 'zfs_load-key_noop', 'zfs_load-key_recursive']
tags = ['functional', 'cli_root', 'zfs_load-key']
[tests/functional/cli_root/zfs_mount]
tests = ['zfs_mount_001_pos', 'zfs_mount_002_pos', 'zfs_mount_003_pos',
'zfs_mount_004_pos', 'zfs_mount_005_pos', 'zfs_mount_007_pos',
'zfs_mount_009_neg', 'zfs_mount_010_neg', 'zfs_mount_011_neg',
Change default to overlay=on Filesystems allow overlay mounts by default on FreeBSD and Linux. Respect the native convention by switching the default to overlay=on, while retaining the option to turn the property off for compatibility with other operating systems' conventions. Update documentation and tests accordingly. Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10030
2020-03-06 17:28:19 +00:00
'zfs_mount_012_pos', 'zfs_mount_all_001_pos', 'zfs_mount_encrypted',
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
'zfs_mount_remount', 'zfs_mount_all_fail', 'zfs_mount_all_mountpoints',
'zfs_mount_test_race']
tags = ['functional', 'cli_root', 'zfs_mount']
[tests/functional/cli_root/zfs_program]
tests = ['zfs_program_json']
tags = ['functional', 'cli_root', 'zfs_program']
[tests/functional/cli_root/zfs_promote]
tests = ['zfs_promote_001_pos', 'zfs_promote_002_pos', 'zfs_promote_003_pos',
'zfs_promote_004_pos', 'zfs_promote_005_pos', 'zfs_promote_006_neg',
'zfs_promote_007_neg', 'zfs_promote_008_pos', 'zfs_promote_encryptionroot']
tags = ['functional', 'cli_root', 'zfs_promote']
[tests/functional/cli_root/zfs_property]
tests = ['zfs_written_property_001_pos']
tags = ['functional', 'cli_root', 'zfs_property']
[tests/functional/cli_root/zfs_receive]
tests = ['zfs_receive_001_pos', 'zfs_receive_002_pos', 'zfs_receive_003_pos',
'zfs_receive_004_neg', 'zfs_receive_005_neg', 'zfs_receive_006_pos',
'zfs_receive_007_neg', 'zfs_receive_008_pos', 'zfs_receive_009_neg',
'zfs_receive_010_pos', 'zfs_receive_011_pos', 'zfs_receive_012_pos',
'zfs_receive_013_pos', 'zfs_receive_014_pos', 'zfs_receive_015_pos',
Add option for forcible unmounting dataset while receiving snapshot. Currently when the dataset is in use we can't receive snapshots. zfs send test/1@asd | zfs recv -FM test/2 cannot unmount '/test/2': Device busy This commits add option 'M' which attempts to forcibly unmount the dataset. Thanks to this we can enforce receiving snapshots in a single step. Note that this functionality is not supported on Linux because the VFS will prevent active mounted filesystems from being unmounted, even with the force option. This is the intended VFS behavior. Test cases were added to verify the expected behavior based on the platform. Discussed-with: Pawel Jakub Dawidek <pjd@FreeBSD.org> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Allan Jude <allanjude@freebsd.org> External-issue: https://reviews.freebsd.org/D22306 Closes #9904
2020-03-17 17:08:32 +00:00
'zfs_receive_016_pos', 'receive-o-x_props_override',
'zfs_receive_from_encrypted', 'zfs_receive_to_encrypted',
'zfs_receive_raw', 'zfs_receive_raw_incremental', 'zfs_receive_-e',
Always track temporary fses and snapshots for accounting The root cause of the issue is that we only occasionally do as the comments in the code suggest and actually ignore the %recv dataset when it comes to filesystem limit tracking. Specifically, the only time we ignore it is when initializing the filesystem and snapshot limit values; when creating a new %recv dataset or deleting one, we always update the bookkeeping. This causes a problem if you init the fs count on a filesystem that already has a %recv dataset, since the bookmarking will be decremented but not incremented. This is resolved in this patch by simply always tracking the %recv dataset as a child. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #10791
2020-08-27 04:38:27 +00:00
'zfs_receive_raw_-d', 'zfs_receive_from_zstd', 'zfs_receive_new_props']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'cli_root', 'zfs_receive']
[tests/functional/cli_root/zfs_rename]
tests = ['zfs_rename_001_pos', 'zfs_rename_002_pos', 'zfs_rename_003_pos',
'zfs_rename_004_neg', 'zfs_rename_005_neg', 'zfs_rename_006_pos',
'zfs_rename_007_pos', 'zfs_rename_008_pos', 'zfs_rename_009_neg',
'zfs_rename_010_neg', 'zfs_rename_011_pos', 'zfs_rename_012_neg',
'zfs_rename_013_pos', 'zfs_rename_014_neg', 'zfs_rename_encrypted_child',
Add 'zfs rename -u' to rename without remounting Allow to rename file systems without remounting if it is possible. It is possible for file systems with 'mountpoint' property set to 'legacy' or 'none' - we don't have to change mount directory for them. Currently such file systems are unmounted on rename and not even mounted back. This introduces layering violation, as we need to update 'f_mntfromname' field in statfs structure related to mountpoint (for the dataset we are renaming and all its children). In my opinion it is worth it, as it allow to update FreeBSD in even cleaner way - in ZFS-only configuration root file system is ZFS file system with 'mountpoint' property set to 'legacy'. If root dataset is named system/rootfs, we can snapshot it (system/rootfs@upgrade), clone it (system/oldrootfs), update FreeBSD and if it doesn't boot we can boot back from system/oldrootfs and rename it back to system/rootfs while it is mounted as /. Before it was not possible, because unmounting / was not possible. Authored by: Pawel Jakub Dawidek <pjd@FreeBSD.org> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: Matt Macy <mmacy@freebsd.org> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10839
2020-09-01 23:14:16 +00:00
'zfs_rename_to_encrypted', 'zfs_rename_mountpoint', 'zfs_rename_nounmount']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'cli_root', 'zfs_rename']
[tests/functional/cli_root/zfs_reservation]
tests = ['zfs_reservation_001_pos', 'zfs_reservation_002_pos']
tags = ['functional', 'cli_root', 'zfs_reservation']
[tests/functional/cli_root/zfs_rollback]
tests = ['zfs_rollback_001_pos', 'zfs_rollback_002_pos',
'zfs_rollback_003_neg', 'zfs_rollback_004_neg']
tags = ['functional', 'cli_root', 'zfs_rollback']
[tests/functional/cli_root/zfs_send]
tests = ['zfs_send_001_pos', 'zfs_send_002_pos', 'zfs_send_003_pos',
'zfs_send_004_neg', 'zfs_send_005_pos', 'zfs_send_006_pos',
'zfs_send_007_pos', 'zfs_send_encrypted', 'zfs_send_raw',
'zfs_send_sparse', 'zfs_send-b']
tags = ['functional', 'cli_root', 'zfs_send']
[tests/functional/cli_root/zfs_set]
tests = ['cache_001_pos', 'cache_002_neg', 'canmount_001_pos',
'canmount_002_pos', 'canmount_003_pos', 'canmount_004_pos',
'checksum_001_pos', 'compression_001_pos', 'mountpoint_001_pos',
'mountpoint_002_pos', 'reservation_001_neg', 'user_property_002_pos',
'share_mount_001_neg', 'snapdir_001_pos', 'onoffs_001_pos',
'user_property_001_pos', 'user_property_003_neg', 'readonly_001_pos',
'user_property_004_pos', 'version_001_neg', 'zfs_set_001_neg',
'zfs_set_002_neg', 'zfs_set_003_neg', 'property_alias_001_pos',
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
'mountpoint_003_pos', 'ro_props_001_pos', 'zfs_set_keylocation',
'zfs_set_feature_activation']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'cli_root', 'zfs_set']
[tests/functional/cli_root/zfs_share]
tests = ['zfs_share_001_pos', 'zfs_share_002_pos', 'zfs_share_003_pos',
Remove dependency on sharetab file and refactor sharing logic == Motivation and Context The current implementation of 'sharenfs' and 'sharesmb' relies on the use of the sharetab file. The use of this file is os-specific and not required by linux or freebsd. Currently the code must maintain updates to this file which adds complexity and presents a significant performance impact when sharing many datasets. In addition, concurrently running 'zfs sharenfs' command results in missing entries in the sharetab file leading to unexpected failures. == Description This change removes the sharetab logic from the linux and freebsd implementation of 'sharenfs' and 'sharesmb'. It still preserves an os-specific library which contains the logic required for sharing NFS or SMB. The following entry points exist in the vastly simplified libshare library: - sa_enable_share -- shares a dataset but may not commit the change - sa_disable_share -- unshares a dataset but may not commit the change - sa_is_shared -- determine if a dataset is shared - sa_commit_share -- notify NFS/SMB subsystem to commit the shares - sa_validate_shareopts -- determine if sharing options are valid The sa_commit_share entry point is provided as a performance enhancement and is not required. The sa_enable_share/sa_disable_share may commit the share as part of the implementation. Libshare provides a framework for both NFS and SMB but some operating systems may not fully support these protocols or all features of the protocol. NFS Operation: For linux, libshare updates /etc/exports.d/zfs.exports to add and remove shares and then commits the changes by invoking 'exportfs -r'. This file, is automatically read by the kernel NFS implementation which makes for better integration with the NFS systemd service. For FreeBSD, libshare updates /etc/zfs/exports to add and remove shares and then commits the changes by sending a SIGHUP to mountd. SMB Operation: For linux, libshare adds and removes files in /var/lib/samba/usershares by calling the 'net' command directly. There is no need to commit the changes. FreeBSD does not support SMB. == Performance Results To test sharing performance we created a pool with an increasing number of datasets and invoked various zfs actions that would enable and disable sharing. The performance testing was limited to NFS sharing. The following tests were performed on an 8 vCPU system with 128GB and a pool comprised of 4 50GB SSDs: Scale testing: - Share all filesystems in parallel -- zfs sharenfs=on <dataset> & - Unshare all filesystems in parallel -- zfs sharenfs=off <dataset> & Functional testing: - share each filesystem serially -- zfs share -a - unshare each filesystem serially -- zfs unshare -a - reset sharenfs property and unshare -- zfs inherit -r sharenfs <pool> For 'zfs sharenfs=on' scale testing we saw an average reduction in time of 89.43% and for 'zfs sharenfs=off' we saw an average reduction in time of 83.36%. Functional testing also shows a huge improvement: - zfs share -- 97.97% reduction in time - zfs unshare -- 96.47% reduction in time - zfs inhert -r sharenfs -- 99.01% reduction in time Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Bryant G. Ly <bryangly@gmail.com> Signed-off-by: George Wilson <gwilson@delphix.com> External-Issue: DLPX-68690 Closes #1603 Closes #7692 Closes #7943 Closes #10300
2020-07-13 16:19:18 +00:00
'zfs_share_004_pos', 'zfs_share_006_pos', 'zfs_share_008_neg',
'zfs_share_010_neg', 'zfs_share_011_pos', 'zfs_share_concurrent_shares']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'cli_root', 'zfs_share']
[tests/functional/cli_root/zfs_snapshot]
tests = ['zfs_snapshot_001_neg', 'zfs_snapshot_002_neg',
'zfs_snapshot_003_neg', 'zfs_snapshot_004_neg', 'zfs_snapshot_005_neg',
'zfs_snapshot_006_pos', 'zfs_snapshot_007_neg', 'zfs_snapshot_008_neg',
'zfs_snapshot_009_pos']
tags = ['functional', 'cli_root', 'zfs_snapshot']
[tests/functional/cli_root/zfs_unload-key]
tests = ['zfs_unload-key', 'zfs_unload-key_all', 'zfs_unload-key_recursive']
tags = ['functional', 'cli_root', 'zfs_unload-key']
[tests/functional/cli_root/zfs_unmount]
tests = ['zfs_unmount_001_pos', 'zfs_unmount_002_pos', 'zfs_unmount_003_pos',
'zfs_unmount_004_pos', 'zfs_unmount_005_pos', 'zfs_unmount_006_pos',
'zfs_unmount_007_neg', 'zfs_unmount_008_neg', 'zfs_unmount_009_pos',
'zfs_unmount_all_001_pos', 'zfs_unmount_nested', 'zfs_unmount_unload_keys']
tags = ['functional', 'cli_root', 'zfs_unmount']
[tests/functional/cli_root/zfs_unshare]
tests = ['zfs_unshare_001_pos', 'zfs_unshare_002_pos', 'zfs_unshare_003_pos',
'zfs_unshare_004_neg', 'zfs_unshare_005_neg', 'zfs_unshare_006_pos',
'zfs_unshare_007_pos']
tags = ['functional', 'cli_root', 'zfs_unshare']
[tests/functional/cli_root/zfs_upgrade]
tests = ['zfs_upgrade_001_pos', 'zfs_upgrade_002_pos', 'zfs_upgrade_003_pos',
'zfs_upgrade_004_pos', 'zfs_upgrade_005_pos', 'zfs_upgrade_006_neg',
'zfs_upgrade_007_neg']
tags = ['functional', 'cli_root', 'zfs_upgrade']
Add 'zfs wait' command Add a mechanism to wait for delete queue to drain. When doing redacted send/recv, many workflows involve deleting files that contain sensitive data. Because of the way zfs handles file deletions, snapshots taken quickly after a rm operation can sometimes still contain the file in question, especially if the file is very large. This can result in issues for redacted send/recv users who expect the deleted files to be redacted in the send streams, and not appear in their clones. This change duplicates much of the zpool wait related logic into a zfs wait command, which can be used to wait until the internal deleteq has been drained. Additional wait activities may be added in the future. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Gallagher <john.gallagher@delphix.com> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #9707
2020-04-01 17:02:06 +00:00
[tests/functional/cli_root/zfs_wait]
tests = ['zfs_wait_deleteq']
tags = ['functional', 'cli_root', 'zfs_wait']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/cli_root/zpool]
Colorize zpool status output If the ZFS_COLOR env variable is set, then use ANSI color output in zpool status: - Column headers are bold - Degraded or offline pools/vdevs are yellow - Non-zero error counters and faulted vdevs/pools are red - The 'status:' and 'action:' sections are yellow if they're displaying a warning. This also includes a new 'faketty' function in libtest.shlib that is compatible with FreeBSD (code provided by @freqlabs). Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #9340
2019-12-20 00:26:07 +00:00
tests = ['zpool_001_neg', 'zpool_002_pos', 'zpool_003_pos', 'zpool_colors']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'cli_root', 'zpool']
[tests/functional/cli_root/zpool_add]
tests = ['zpool_add_001_pos', 'zpool_add_002_pos', 'zpool_add_003_pos',
ZTS: Move dumpdev tests to sunos.run Neither FreeBSD nor Linux support dumping to zvols. DilOS still uses these tests, so the files are kept and the tests have been relocated to sunos.run. An `is_illumos` function was added to libtest.shlib to eliminate some awkward platform checks. A few functions that are not expected to be used outside of illumos have been sanitized of extraneous FreeBSD adaptations. Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9794
2020-01-03 17:08:23 +00:00
'zpool_add_004_pos', 'zpool_add_006_pos', 'zpool_add_007_neg',
'zpool_add_008_neg', 'zpool_add_009_neg', 'zpool_add_010_pos',
ZTS: Move more tests out of common.run These tests won't run on all platforms as currently implemented: * add_nested_replacing_spare (needs zed) * fault (needs zed) * mmp (needs multihost_history) * umount_unlink_drained (needs procfs) * zpool_expand (needs udev events and zed) * zpool_reopen (needs scsi_debug) * zvol_swap_003_pos (needs to modify vfstab) * zvol_swap_00[56]_pos (needs swaphigh/swaplen) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9871
2020-01-27 21:29:25 +00:00
'add-o_ashift', 'add_prop_ashift']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'cli_root', 'zpool_add']
[tests/functional/cli_root/zpool_attach]
tests = ['zpool_attach_001_neg', 'attach-o_ashift']
tags = ['functional', 'cli_root', 'zpool_attach']
[tests/functional/cli_root/zpool_clear]
tests = ['zpool_clear_001_pos', 'zpool_clear_002_neg', 'zpool_clear_003_neg',
'zpool_clear_readonly']
tags = ['functional', 'cli_root', 'zpool_clear']
[tests/functional/cli_root/zpool_create]
tests = ['zpool_create_001_pos', 'zpool_create_002_pos',
'zpool_create_003_pos', 'zpool_create_004_pos', 'zpool_create_005_pos',
'zpool_create_006_pos', 'zpool_create_007_neg', 'zpool_create_008_pos',
'zpool_create_009_neg', 'zpool_create_010_neg', 'zpool_create_011_neg',
ZTS: Move dumpdev tests to sunos.run Neither FreeBSD nor Linux support dumping to zvols. DilOS still uses these tests, so the files are kept and the tests have been relocated to sunos.run. An `is_illumos` function was added to libtest.shlib to eliminate some awkward platform checks. A few functions that are not expected to be used outside of illumos have been sanitized of extraneous FreeBSD adaptations. Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9794
2020-01-03 17:08:23 +00:00
'zpool_create_012_neg', 'zpool_create_014_neg', 'zpool_create_015_neg',
'zpool_create_017_neg', 'zpool_create_018_pos', 'zpool_create_019_pos',
'zpool_create_020_pos', 'zpool_create_021_pos', 'zpool_create_022_pos',
'zpool_create_023_neg', 'zpool_create_024_pos',
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
'zpool_create_encrypted', 'zpool_create_crypt_combos',
'zpool_create_features_001_pos', 'zpool_create_features_002_pos',
'zpool_create_features_003_pos', 'zpool_create_features_004_neg',
'zpool_create_features_005_pos',
'create-o_ashift', 'zpool_create_tempname']
tags = ['functional', 'cli_root', 'zpool_create']
[tests/functional/cli_root/zpool_destroy]
tests = ['zpool_destroy_001_pos', 'zpool_destroy_002_pos',
'zpool_destroy_003_neg']
pre =
post =
tags = ['functional', 'cli_root', 'zpool_destroy']
[tests/functional/cli_root/zpool_detach]
tests = ['zpool_detach_001_neg']
tags = ['functional', 'cli_root', 'zpool_detach']
Enable zpool events tunables and tests on FreeBSD We have have made the necessary changes in our module code to expose zevents through both devd and the zpool events ioctl. Now the tunables can be exposed and zpool events tests can be enabled on both platforms. A few minor tweaks to the tests were needed to accommodate the way wc formats output on FreeBSD. zed remains to be ported. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10008
2020-02-18 19:22:56 +00:00
[tests/functional/cli_root/zpool_events]
tests = ['zpool_events_clear', 'zpool_events_cliargs', 'zpool_events_follow',
'zpool_events_poolname', 'zpool_events_errors']
tags = ['functional', 'cli_root', 'zpool_events']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/cli_root/zpool_export]
tests = ['zpool_export_001_pos', 'zpool_export_002_pos',
'zpool_export_003_neg', 'zpool_export_004_pos']
tags = ['functional', 'cli_root', 'zpool_export']
[tests/functional/cli_root/zpool_get]
tests = ['zpool_get_001_pos', 'zpool_get_002_pos', 'zpool_get_003_pos',
'zpool_get_004_neg', 'zpool_get_005_pos']
tags = ['functional', 'cli_root', 'zpool_get']
[tests/functional/cli_root/zpool_history]
tests = ['zpool_history_001_neg', 'zpool_history_002_pos']
tags = ['functional', 'cli_root', 'zpool_history']
[tests/functional/cli_root/zpool_import]
tests = ['zpool_import_001_pos', 'zpool_import_002_pos',
'zpool_import_003_pos', 'zpool_import_004_pos', 'zpool_import_005_pos',
'zpool_import_006_pos', 'zpool_import_007_pos', 'zpool_import_008_pos',
'zpool_import_009_neg', 'zpool_import_010_pos', 'zpool_import_011_neg',
'zpool_import_012_pos', 'zpool_import_013_neg', 'zpool_import_014_pos',
'zpool_import_015_pos',
'zpool_import_features_001_pos', 'zpool_import_features_002_neg',
'zpool_import_features_003_pos', 'zpool_import_missing_001_pos',
'zpool_import_missing_002_pos', 'zpool_import_missing_003_pos',
'zpool_import_rename_001_pos', 'zpool_import_all_001_pos',
'zpool_import_encrypted', 'zpool_import_encrypted_load',
'zpool_import_errata3', 'zpool_import_errata4',
'import_cachefile_device_added',
'import_cachefile_device_removed',
'import_cachefile_device_replaced',
'import_cachefile_mirror_attached',
'import_cachefile_mirror_detached',
'import_cachefile_shared_device',
'import_devices_missing',
'import_paths_changed',
'import_rewind_config_changed',
'import_rewind_device_replaced']
tags = ['functional', 'cli_root', 'zpool_import']
[tests/functional/cli_root/zpool_labelclear]
tests = ['zpool_labelclear_active', 'zpool_labelclear_exported',
'zpool_labelclear_removed', 'zpool_labelclear_valid']
pre =
post =
tags = ['functional', 'cli_root', 'zpool_labelclear']
[tests/functional/cli_root/zpool_initialize]
tests = ['zpool_initialize_attach_detach_add_remove',
'zpool_initialize_import_export',
'zpool_initialize_offline_export_import_online',
'zpool_initialize_online_offline',
'zpool_initialize_split',
'zpool_initialize_start_and_cancel_neg',
'zpool_initialize_start_and_cancel_pos',
'zpool_initialize_suspend_resume',
'zpool_initialize_unsupported_vdevs',
'zpool_initialize_verify_checksums',
'zpool_initialize_verify_initialized']
pre =
tags = ['functional', 'cli_root', 'zpool_initialize']
[tests/functional/cli_root/zpool_offline]
tests = ['zpool_offline_001_pos', 'zpool_offline_002_neg',
'zpool_offline_003_pos']
tags = ['functional', 'cli_root', 'zpool_offline']
[tests/functional/cli_root/zpool_online]
tests = ['zpool_online_001_pos', 'zpool_online_002_neg']
tags = ['functional', 'cli_root', 'zpool_online']
[tests/functional/cli_root/zpool_remove]
tests = ['zpool_remove_001_neg', 'zpool_remove_002_pos',
'zpool_remove_003_pos']
tags = ['functional', 'cli_root', 'zpool_remove']
[tests/functional/cli_root/zpool_replace]
tests = ['zpool_replace_001_neg', 'replace-o_ashift', 'replace_prop_ashift']
tags = ['functional', 'cli_root', 'zpool_replace']
[tests/functional/cli_root/zpool_resilver]
tests = ['zpool_resilver_bad_args', 'zpool_resilver_restart']
tags = ['functional', 'cli_root', 'zpool_resilver']
[tests/functional/cli_root/zpool_scrub]
tests = ['zpool_scrub_001_neg', 'zpool_scrub_002_pos', 'zpool_scrub_003_pos',
'zpool_scrub_004_pos', 'zpool_scrub_005_pos',
'zpool_scrub_encrypted_unloaded', 'zpool_scrub_print_repairing',
'zpool_scrub_offline_device', 'zpool_scrub_multiple_copies']
tags = ['functional', 'cli_root', 'zpool_scrub']
[tests/functional/cli_root/zpool_set]
tests = ['zpool_set_001_pos', 'zpool_set_002_neg', 'zpool_set_003_neg',
'zpool_set_ashift', 'zpool_set_features']
tags = ['functional', 'cli_root', 'zpool_set']
[tests/functional/cli_root/zpool_split]
tests = ['zpool_split_cliargs', 'zpool_split_devices',
'zpool_split_encryption', 'zpool_split_props', 'zpool_split_vdevs',
Enable splitting mirrors with indirect vdevs When a top-level vdev is removed from a pool it is converted to an indirect vdev. Until now splitting such mirrored pools was not possible with zpool split. This patch enables handling of indirect vdevs and splitting of those pools with zpool split. Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #10283
2020-05-06 17:32:28 +00:00
'zpool_split_resilver', 'zpool_split_indirect']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'cli_root', 'zpool_split']
[tests/functional/cli_root/zpool_status]
tests = ['zpool_status_001_pos', 'zpool_status_002_pos']
tags = ['functional', 'cli_root', 'zpool_status']
[tests/functional/cli_root/zpool_sync]
tests = ['zpool_sync_001_pos', 'zpool_sync_002_neg']
tags = ['functional', 'cli_root', 'zpool_sync']
[tests/functional/cli_root/zpool_trim]
tests = ['zpool_trim_attach_detach_add_remove',
'zpool_trim_import_export', 'zpool_trim_multiple', 'zpool_trim_neg',
'zpool_trim_offline_export_import_online', 'zpool_trim_online_offline',
'zpool_trim_partial', 'zpool_trim_rate', 'zpool_trim_rate_neg',
'zpool_trim_secure', 'zpool_trim_split', 'zpool_trim_start_and_cancel_neg',
'zpool_trim_start_and_cancel_pos', 'zpool_trim_suspend_resume',
'zpool_trim_unsupported_vdevs', 'zpool_trim_verify_checksums',
'zpool_trim_verify_trimmed']
tags = ['functional', 'zpool_trim']
[tests/functional/cli_root/zpool_upgrade]
tests = ['zpool_upgrade_001_pos', 'zpool_upgrade_002_pos',
'zpool_upgrade_003_pos', 'zpool_upgrade_004_pos',
'zpool_upgrade_005_neg', 'zpool_upgrade_006_neg',
'zpool_upgrade_007_pos', 'zpool_upgrade_008_pos',
'zpool_upgrade_009_neg']
tags = ['functional', 'cli_root', 'zpool_upgrade']
[tests/functional/cli_root/zpool_wait]
tests = ['zpool_wait_discard', 'zpool_wait_freeing',
'zpool_wait_initialize_basic', 'zpool_wait_initialize_cancel',
'zpool_wait_initialize_flag', 'zpool_wait_multiple',
'zpool_wait_no_activity', 'zpool_wait_remove', 'zpool_wait_remove_cancel',
Add trim support to zpool wait Manual trims fall into the category of long-running pool activities which people might want to wait synchronously for. This change adds support to 'zpool wait' for waiting for manual trim operations to complete. It also adds a '-w' flag to 'zpool trim' which can be used to turn 'zpool trim' into a synchronous operation. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Signed-off-by: John Gallagher <john.gallagher@delphix.com> Closes #10071
2020-03-04 23:07:11 +00:00
'zpool_wait_trim_basic', 'zpool_wait_trim_cancel', 'zpool_wait_trim_flag',
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
'zpool_wait_usage']
tags = ['functional', 'cli_root', 'zpool_wait']
[tests/functional/cli_root/zpool_wait/scan]
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 18:05:50 +00:00
tests = ['zpool_wait_replace_cancel', 'zpool_wait_rebuild',
'zpool_wait_resilver', 'zpool_wait_scrub_cancel',
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
'zpool_wait_replace', 'zpool_wait_scrub_basic', 'zpool_wait_scrub_flag']
tags = ['functional', 'cli_root', 'zpool_wait']
[tests/functional/cli_user/misc]
tests = ['zdb_001_neg', 'zfs_001_neg', 'zfs_allow_001_neg',
'zfs_clone_001_neg', 'zfs_create_001_neg', 'zfs_destroy_001_neg',
'zfs_get_001_neg', 'zfs_inherit_001_neg', 'zfs_mount_001_neg',
'zfs_promote_001_neg', 'zfs_receive_001_neg', 'zfs_rename_001_neg',
'zfs_rollback_001_neg', 'zfs_send_001_neg', 'zfs_set_001_neg',
'zfs_share_001_neg', 'zfs_snapshot_001_neg', 'zfs_unallow_001_neg',
'zfs_unmount_001_neg', 'zfs_unshare_001_neg', 'zfs_upgrade_001_neg',
'zpool_001_neg', 'zpool_add_001_neg', 'zpool_attach_001_neg',
'zpool_clear_001_neg', 'zpool_create_001_neg', 'zpool_destroy_001_neg',
'zpool_detach_001_neg', 'zpool_export_001_neg', 'zpool_get_001_neg',
'zpool_history_001_neg', 'zpool_import_001_neg', 'zpool_import_002_neg',
'zpool_offline_001_neg', 'zpool_online_001_neg', 'zpool_remove_001_neg',
'zpool_replace_001_neg', 'zpool_scrub_001_neg', 'zpool_set_001_neg',
'zpool_status_001_neg', 'zpool_upgrade_001_neg', 'arcstat_001_pos',
'arc_summary_001_pos', 'arc_summary_002_neg', 'zpool_wait_privilege']
user =
tags = ['functional', 'cli_user', 'misc']
[tests/functional/cli_user/zfs_list]
tests = ['zfs_list_001_pos', 'zfs_list_002_pos', 'zfs_list_003_pos',
'zfs_list_004_neg', 'zfs_list_007_pos', 'zfs_list_008_neg']
user =
tags = ['functional', 'cli_user', 'zfs_list']
[tests/functional/cli_user/zpool_iostat]
tests = ['zpool_iostat_001_neg', 'zpool_iostat_002_pos',
'zpool_iostat_003_neg', 'zpool_iostat_004_pos',
'zpool_iostat_005_pos', 'zpool_iostat_-c_disable',
'zpool_iostat_-c_homedir', 'zpool_iostat_-c_searchpath']
user =
tags = ['functional', 'cli_user', 'zpool_iostat']
[tests/functional/cli_user/zpool_list]
tests = ['zpool_list_001_pos', 'zpool_list_002_neg']
user =
tags = ['functional', 'cli_user', 'zpool_list']
[tests/functional/cli_user/zpool_status]
tests = ['zpool_status_003_pos', 'zpool_status_-c_disable',
'zpool_status_-c_homedir', 'zpool_status_-c_searchpath']
user =
tags = ['functional', 'cli_user', 'zpool_status']
[tests/functional/compression]
Fix L2ARC reads when compressed ARC disabled When reading compressed blocks from the L2ARC, with compressed ARC disabled, arc_hdr_size() returns LSIZE rather than PSIZE, but the actual read is PSIZE. This causes l2arc_read_done() to compare the checksum against the wrong size, resulting in checksum failure. This manifests as an increase in the kstat l2_cksum_bad and the read being retried from the main pool, making the L2ARC ineffective. Add new L2ARC tests with Compressed ARC enabled/disabled Blocks are handled differently depending on the state of the zfs_compressed_arc_enabled tunable. If a block is compressed on-disk, and compressed_arc is enabled: - the block is read from disk - It is NOT decompressed - It is added to the ARC in its compressed form - l2arc_write_buffers() may write it to the L2ARC (as is) - l2arc_read_done() compares the checksum to the BP (compressed) However, if compressed_arc is disabled: - the block is read from disk - It is decompressed - It is added to the ARC (uncompressed) - l2arc_write_buffers() will use l2arc_apply_transforms() to recompress the block, before writing it to the L2ARC - l2arc_read_done() compares the checksum to the BP (compressed) - l2arc_read_done() will use l2arc_untransform() to uncompress it This test writes out a test file to a pool consisting of one disk and one cache device, then randomly reads from it. Since the arc_max in the tests is low, this will feed the L2ARC, and result in reads from the L2ARC. We compare the value of the kstat l2_cksum_bad before and after to determine if any blocks failed to survive the trip through the L2ARC. Sponsored-by: The FreeBSD Foundation Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Allan Jude <allanjude@freebsd.org> Closes #10693
2020-08-14 06:31:20 +00:00
tests = ['compress_001_pos', 'compress_002_pos', 'compress_003_pos',
Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
'l2arc_compressed_arc', 'l2arc_compressed_arc_disabled',
'l2arc_encrypted', 'l2arc_encrypted_no_compressed_arc']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'compression']
[tests/functional/cp_files]
tests = ['cp_files_001_pos']
tags = ['functional', 'cp_files']
[tests/functional/ctime]
tests = ['ctime_001_pos' ]
tags = ['functional', 'ctime']
[tests/functional/delegate]
tests = ['zfs_allow_001_pos', 'zfs_allow_002_pos', 'zfs_allow_003_pos',
'zfs_allow_004_pos', 'zfs_allow_005_pos', 'zfs_allow_006_pos',
'zfs_allow_007_pos', 'zfs_allow_008_pos', 'zfs_allow_009_neg',
'zfs_allow_010_pos', 'zfs_allow_011_neg', 'zfs_allow_012_neg',
'zfs_unallow_001_pos', 'zfs_unallow_002_pos', 'zfs_unallow_003_pos',
'zfs_unallow_004_pos', 'zfs_unallow_005_pos', 'zfs_unallow_006_pos',
'zfs_unallow_007_neg', 'zfs_unallow_008_neg']
tags = ['functional', 'delegate']
[tests/functional/exec]
tests = ['exec_001_pos', 'exec_002_neg']
tags = ['functional', 'exec']
[tests/functional/features/async_destroy]
tests = ['async_destroy_001_pos']
tags = ['functional', 'features', 'async_destroy']
[tests/functional/features/large_dnode]
tests = ['large_dnode_001_pos', 'large_dnode_003_pos', 'large_dnode_004_neg',
'large_dnode_005_pos', 'large_dnode_007_neg', 'large_dnode_009_pos']
tags = ['functional', 'features', 'large_dnode']
[tests/functional/grow]
pre =
post =
tests = ['grow_pool_001_pos', 'grow_replicas_001_pos']
tags = ['functional', 'grow']
[tests/functional/history]
tests = ['history_001_pos', 'history_002_pos', 'history_003_pos',
'history_004_pos', 'history_005_neg', 'history_006_neg',
'history_007_pos', 'history_008_pos', 'history_009_pos',
'history_010_pos']
tags = ['functional', 'history']
[tests/functional/hkdf]
tests = ['run_hkdf_test']
tags = ['functional', 'hkdf']
[tests/functional/inheritance]
tests = ['inherit_001_pos']
pre =
tags = ['functional', 'inheritance']
[tests/functional/io]
tests = ['sync', 'psync', 'posixaio', 'mmap']
tags = ['functional', 'io']
[tests/functional/inuse]
ZTS: Move dumpdev tests to sunos.run Neither FreeBSD nor Linux support dumping to zvols. DilOS still uses these tests, so the files are kept and the tests have been relocated to sunos.run. An `is_illumos` function was added to libtest.shlib to eliminate some awkward platform checks. A few functions that are not expected to be used outside of illumos have been sanitized of extraneous FreeBSD adaptations. Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9794
2020-01-03 17:08:23 +00:00
tests = ['inuse_004_pos', 'inuse_005_pos', 'inuse_008_pos', 'inuse_009_pos']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
post =
tags = ['functional', 'inuse']
[tests/functional/large_files]
tests = ['large_files_001_pos', 'large_files_002_pos']
tags = ['functional', 'large_files']
[tests/functional/largest_pool]
tests = ['largest_pool_001_pos']
pre =
post =
tags = ['functional', 'largest_pool']
[tests/functional/limits]
tests = ['filesystem_count', 'filesystem_limit', 'snapshot_count',
'snapshot_limit']
tags = ['functional', 'limits']
[tests/functional/link_count]
ZTS: Consistency pass for .ksh extensions * Use .ksh extension for ksh scripts, not .sh * Remove .ksh extension from tests in common.run Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #9502
2019-10-24 17:47:47 +00:00
tests = ['link_count_001', 'link_count_root_inode']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'link_count']
[tests/functional/migration]
tests = ['migration_001_pos', 'migration_002_pos', 'migration_003_pos',
'migration_004_pos', 'migration_005_pos', 'migration_006_pos',
'migration_007_pos', 'migration_008_pos', 'migration_009_pos',
'migration_010_pos', 'migration_011_pos', 'migration_012_pos']
tags = ['functional', 'migration']
[tests/functional/mmap]
tests = ['mmap_write_001_pos', 'mmap_read_001_pos']
tags = ['functional', 'mmap']
[tests/functional/mount]
ZTS: Move more tests out of common.run These tests won't run on all platforms as currently implemented: * add_nested_replacing_spare (needs zed) * fault (needs zed) * mmp (needs multihost_history) * umount_unlink_drained (needs procfs) * zpool_expand (needs udev events and zed) * zpool_reopen (needs scsi_debug) * zvol_swap_003_pos (needs to modify vfstab) * zvol_swap_00[56]_pos (needs swaphigh/swaplen) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9871
2020-01-27 21:29:25 +00:00
tests = ['umount_001', 'umountall_001']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'mount']
[tests/functional/mv_files]
tests = ['mv_files_001_pos', 'mv_files_002_pos', 'random_creation']
tags = ['functional', 'mv_files']
[tests/functional/nestedfs]
tests = ['nestedfs_001_pos']
tags = ['functional', 'nestedfs']
[tests/functional/no_space]
tests = ['enospc_001_pos', 'enospc_002_pos', 'enospc_003_pos',
'enospc_df']
tags = ['functional', 'no_space']
[tests/functional/nopwrite]
tests = ['nopwrite_copies', 'nopwrite_mtime', 'nopwrite_negative',
'nopwrite_promoted_clone', 'nopwrite_recsize', 'nopwrite_sync',
'nopwrite_varying_compression', 'nopwrite_volume']
tags = ['functional', 'nopwrite']
[tests/functional/online_offline]
tests = ['online_offline_001_pos', 'online_offline_002_neg',
'online_offline_003_neg']
tags = ['functional', 'online_offline']
Add FreeBSD support to OpenZFS Add the FreeBSD platform code to the OpenZFS repository. As of this commit the source can be compiled and tested on FreeBSD 11 and 12. Subsequent commits are now required to compile on FreeBSD and Linux. Additionally, they must pass the ZFS Test Suite on FreeBSD which is being run by the CI. As of this commit 1230 tests pass on FreeBSD and there are no unexpected failures. Reviewed-by: Sean Eric Fagan <sef@ixsystems.com> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #898 Closes #8987
2020-04-14 18:36:28 +00:00
[tests/functional/persist_l2arc]
tests = ['persist_l2arc_001_pos', 'persist_l2arc_002_pos',
'persist_l2arc_003_neg', 'persist_l2arc_004_pos', 'persist_l2arc_005_pos',
'persist_l2arc_006_pos', 'persist_l2arc_007_pos', 'persist_l2arc_008_pos']
tags = ['functional', 'persist_l2arc']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/pool_checkpoint]
tests = ['checkpoint_after_rewind', 'checkpoint_big_rewind',
'checkpoint_capacity', 'checkpoint_conf_change', 'checkpoint_discard',
'checkpoint_discard_busy', 'checkpoint_discard_many',
'checkpoint_indirect', 'checkpoint_invalid', 'checkpoint_lun_expsz',
'checkpoint_open', 'checkpoint_removal', 'checkpoint_rewind',
'checkpoint_ro_rewind', 'checkpoint_sm_scale', 'checkpoint_twice',
'checkpoint_vdev_add', 'checkpoint_zdb', 'checkpoint_zhack_feat']
tags = ['functional', 'pool_checkpoint']
timeout = 1800
[tests/functional/pool_names]
tests = ['pool_names_001_pos', 'pool_names_002_neg']
pre =
post =
tags = ['functional', 'pool_names']
[tests/functional/poolversion]
tests = ['poolversion_001_pos', 'poolversion_002_pos']
tags = ['functional', 'poolversion']
[tests/functional/pyzfs]
tests = ['pyzfs_unittest']
pre =
post =
tags = ['functional', 'pyzfs']
[tests/functional/quota]
tests = ['quota_001_pos', 'quota_002_pos', 'quota_003_pos',
'quota_004_pos', 'quota_005_pos', 'quota_006_neg']
tags = ['functional', 'quota']
[tests/functional/redacted_send]
tests = ['redacted_compressed', 'redacted_contents', 'redacted_deleted',
'redacted_disabled_feature', 'redacted_embedded', 'redacted_holes',
'redacted_incrementals', 'redacted_largeblocks', 'redacted_many_clones',
'redacted_mixed_recsize', 'redacted_mounts', 'redacted_negative',
'redacted_origin', 'redacted_props', 'redacted_resume', 'redacted_size',
'redacted_volume']
tags = ['functional', 'redacted_send']
[tests/functional/raidz]
tests = ['raidz_001_neg', 'raidz_002_pos']
tags = ['functional', 'raidz']
[tests/functional/redundancy]
tests = ['redundancy_001_pos', 'redundancy_002_pos', 'redundancy_003_pos',
'redundancy_004_neg']
tags = ['functional', 'redundancy']
[tests/functional/refquota]
tests = ['refquota_001_pos', 'refquota_002_pos', 'refquota_003_pos',
'refquota_004_pos', 'refquota_005_pos', 'refquota_006_neg',
'refquota_007_neg', 'refquota_008_neg']
tags = ['functional', 'refquota']
[tests/functional/refreserv]
tests = ['refreserv_001_pos', 'refreserv_002_pos', 'refreserv_003_pos',
'refreserv_004_pos', 'refreserv_005_pos', 'refreserv_multi_raidz',
'refreserv_raidz']
tags = ['functional', 'refreserv']
[tests/functional/removal]
pre =
tests = ['removal_all_vdev', 'removal_cancel', 'removal_check_space',
'removal_condense_export', 'removal_multiple_indirection',
'removal_nopwrite', 'removal_remap_deadlists',
'removal_resume_export', 'removal_sanity', 'removal_with_add',
'removal_with_create_fs', 'removal_with_dedup',
'removal_with_errors', 'removal_with_export',
'removal_with_ganging', 'removal_with_faulted',
'removal_with_remove', 'removal_with_scrub', 'removal_with_send',
'removal_with_send_recv', 'removal_with_snapshot',
'removal_with_write', 'removal_with_zdb', 'remove_expanded',
'remove_mirror', 'remove_mirror_sanity', 'remove_raidz',
'remove_indirect']
tags = ['functional', 'removal']
[tests/functional/rename_dirs]
tests = ['rename_dirs_001_pos']
tags = ['functional', 'rename_dirs']
[tests/functional/replacement]
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 18:05:50 +00:00
tests = ['attach_import', 'attach_multiple', 'attach_rebuild',
'attach_resilver', 'detach', 'rebuild_disabled_feature',
'rebuild_multiple', 'rebuild_raidz', 'replace_import', 'replace_rebuild',
'replace_resilver', 'resilver_restart_001', 'resilver_restart_002',
'scrub_cancel']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'replacement']
[tests/functional/reservation]
tests = ['reservation_001_pos', 'reservation_002_pos', 'reservation_003_pos',
'reservation_004_pos', 'reservation_005_pos', 'reservation_006_pos',
'reservation_007_pos', 'reservation_008_pos', 'reservation_009_pos',
'reservation_010_pos', 'reservation_011_pos', 'reservation_012_pos',
'reservation_013_pos', 'reservation_014_pos', 'reservation_015_pos',
'reservation_016_pos', 'reservation_017_pos', 'reservation_018_pos',
'reservation_019_pos', 'reservation_020_pos', 'reservation_021_neg',
'reservation_022_pos']
tags = ['functional', 'reservation']
[tests/functional/rootpool]
tests = ['rootpool_002_neg', 'rootpool_003_neg', 'rootpool_007_pos']
tags = ['functional', 'rootpool']
[tests/functional/rsend]
Remove deduplicated send/receive code Deduplicated send streams (i.e. `zfs send -D` and `zfs receive` of such streams) are deprecated. Deduplicated send streams can be received by first converting them to non-deduplicated with the `zstream redup` command. This commit removes the code for sending and receiving deduplicated send streams. `zfs send -D` will now print a warning, ignore the `-D` flag, and generate a regular (non-deduplicated) send stream. `zfs receive` of a deduplicated send stream will print an error message and fail. The resulting code simplification (especially in the kernel's support for receiving dedup streams) should help enable future performance enhancements. Several new tests are added which leverage `zstream redup`. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Issue #7887 Issue #10117 Issue #10156 Closes #10212
2020-04-23 17:06:57 +00:00
tests = ['recv_dedup', 'recv_dedup_encrypted_zvol', 'rsend_001_pos',
'rsend_002_pos', 'rsend_003_pos', 'rsend_004_pos', 'rsend_005_pos',
'rsend_006_pos', 'rsend_007_pos', 'rsend_008_pos', 'rsend_009_pos',
'rsend_010_pos', 'rsend_011_pos', 'rsend_012_pos', 'rsend_013_pos',
'rsend_014_pos', 'rsend_016_neg', 'rsend_019_pos', 'rsend_020_pos',
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
'rsend_021_pos', 'rsend_022_pos', 'rsend_024_pos',
'send-c_verify_ratio', 'send-c_verify_contents', 'send-c_props',
'send-c_incremental', 'send-c_volume', 'send-c_zstreamdump',
'send-c_lz4_disabled', 'send-c_recv_lz4_disabled',
Remove deduplicated send/receive code Deduplicated send streams (i.e. `zfs send -D` and `zfs receive` of such streams) are deprecated. Deduplicated send streams can be received by first converting them to non-deduplicated with the `zstream redup` command. This commit removes the code for sending and receiving deduplicated send streams. `zfs send -D` will now print a warning, ignore the `-D` flag, and generate a regular (non-deduplicated) send stream. `zfs receive` of a deduplicated send stream will print an error message and fail. The resulting code simplification (especially in the kernel's support for receiving dedup streams) should help enable future performance enhancements. Several new tests are added which leverage `zstream redup`. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Issue #7887 Issue #10117 Issue #10156 Closes #10212
2020-04-23 17:06:57 +00:00
'send-c_mixed_compression', 'send-c_stream_size_estimate',
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
'send-c_embedded_blocks', 'send-c_resume', 'send-cpL_varied_recsize',
File incorrectly zeroed when receiving incremental stream that toggles -L Background: By increasing the recordsize property above the default of 128KB, a filesystem may have "large" blocks. By default, a send stream of such a filesystem does not contain large WRITE records, instead it decreases objects' block sizes to 128KB and splits the large blocks into 128KB blocks, allowing the large-block filesystem to be received by a system that does not support the `large_blocks` feature. A send stream generated by `zfs send -L` (or `--large-block`) preserves the large block size on the receiving system, by using large WRITE records. When receiving an incremental send stream for a filesystem with large blocks, if the send stream's -L flag was toggled, a bug is encountered in which the file's contents are incorrectly zeroed out. The contents of any blocks that were not modified by this send stream will be lost. "Toggled" means that the previous send used `-L`, but this incremental does not use `-L` (-L to no-L); or that the previous send did not use `-L`, but this incremental does use `-L` (no-L to -L). Changes: This commit addresses the problem with several changes to the semantics of zfs send/receive: 1. "-L to no-L" incrementals are rejected. If the previous send used `-L`, but this incremental does not use `-L`, the `zfs receive` will fail with this error message: incremental send stream requires -L (--large-block), to match previous receive. 2. "no-L to -L" incrementals are handled correctly, preserving the smaller (128KB) block size of any already-received files that used large blocks on the sending system but were split by `zfs send` without the `-L` flag. 3. A new send stream format flag is added, `SWITCH_TO_LARGE_BLOCKS`. This feature indicates that we can correctly handle "no-L to -L" incrementals. This flag is currently not set on any send streams. In the future, we intend for incremental send streams of snapshots that have large blocks to use `-L` by default, and these streams will also have the `SWITCH_TO_LARGE_BLOCKS` feature set. This ensures that streams from the default use of `zfs send` won't encounter the bug mentioned above, because they can't be received by software with the bug. Implementation notes: To facilitate accessing the ZPL's generation number, `zfs_space_delta_cb()` has been renamed to `zpl_get_file_info()` and restructured to fill in a struct with ZPL-specific info including owner and generation. In the "no-L to -L" case, if this is a compressed send stream (from `zfs send -cL`), large WRITE records that are being written to small (128KB) blocksize files need to be decompressed so that they can be written split up into multiple blocks. The zio pipeline will recompress each smaller block individually. A new test case, `send-L_toggle`, is added, which tests the "no-L to -L" case and verifies that we get an error for the "-L to no-L" case. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Closes #6224 Closes #10383
2020-06-09 17:41:01 +00:00
'send-c_recv_dedup', 'send-L_toggle', 'send_encrypted_hierarchy',
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
'send_encrypted_props', 'send_encrypted_truncated_files',
'send_freeobjects', 'send_realloc_files',
'send_realloc_encrypted_files', 'send_spill_block', 'send_holds',
Remove deduplicated send/receive code Deduplicated send streams (i.e. `zfs send -D` and `zfs receive` of such streams) are deprecated. Deduplicated send streams can be received by first converting them to non-deduplicated with the `zstream redup` command. This commit removes the code for sending and receiving deduplicated send streams. `zfs send -D` will now print a warning, ignore the `-D` flag, and generate a regular (non-deduplicated) send stream. `zfs receive` of a deduplicated send stream will print an error message and fail. The resulting code simplification (especially in the kernel's support for receiving dedup streams) should help enable future performance enhancements. Several new tests are added which leverage `zstream redup`. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com> Issue #7887 Issue #10117 Issue #10156 Closes #10212
2020-04-23 17:06:57 +00:00
'send_hole_birth', 'send_mixed_raw', 'send-wR_encrypted_zvol',
Add 'zfs send --saved' flag This commit adds the --saved (-S) to the 'zfs send' command. This flag allows a user to send a partially received dataset, which can be useful when migrating a backup server to new hardware. This flag is compatible with resumable receives, so even if the saved send is interrupted, it can be resumed. The flag does not require any user / kernel ABI changes or any new feature flags in the send stream format. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Alek Pinchuk <apinchuk@datto.com> Reviewed-by: Paul Zuchowski <pzuchowski@datto.com> Reviewed-by: Christian Schwarz <me@cschwarz.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #9007
2020-01-10 18:16:58 +00:00
'send_partial_dataset']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'rsend']
[tests/functional/scrub_mirror]
tests = ['scrub_mirror_001_pos', 'scrub_mirror_002_pos',
'scrub_mirror_003_pos', 'scrub_mirror_004_pos']
tags = ['functional', 'scrub_mirror']
[tests/functional/slog]
tests = ['slog_001_pos', 'slog_002_pos', 'slog_003_pos', 'slog_004_pos',
'slog_005_pos', 'slog_006_pos', 'slog_007_pos', 'slog_008_neg',
'slog_009_neg', 'slog_010_neg', 'slog_011_neg', 'slog_012_neg',
'slog_013_pos', 'slog_014_pos', 'slog_015_neg', 'slog_replay_fs_001',
'slog_replay_fs_002', 'slog_replay_volume']
tags = ['functional', 'slog']
[tests/functional/snapshot]
tests = ['clone_001_pos', 'rollback_001_pos', 'rollback_002_pos',
'rollback_003_pos', 'snapshot_001_pos', 'snapshot_002_pos',
'snapshot_003_pos', 'snapshot_004_pos', 'snapshot_005_pos',
'snapshot_006_pos', 'snapshot_007_pos', 'snapshot_008_pos',
'snapshot_009_pos', 'snapshot_010_pos', 'snapshot_011_pos',
'snapshot_012_pos', 'snapshot_013_pos', 'snapshot_014_pos',
'snapshot_017_pos']
tags = ['functional', 'snapshot']
[tests/functional/snapused]
tests = ['snapused_001_pos', 'snapused_002_pos', 'snapused_003_pos',
'snapused_004_pos', 'snapused_005_pos']
tags = ['functional', 'snapused']
[tests/functional/sparse]
tests = ['sparse_001_pos']
tags = ['functional', 'sparse']
[tests/functional/suid]
tests = ['suid_write_to_suid', 'suid_write_to_sgid', 'suid_write_to_suid_sgid',
'suid_write_to_none']
tags = ['functional', 'suid']
[tests/functional/threadsappend]
tests = ['threadsappend_001_pos']
tags = ['functional', 'threadsappend']
[tests/functional/trim]
tests = ['autotrim_integrity', 'autotrim_config', 'autotrim_trim_integrity',
Trim L2ARC The l2arc_evict() function is responsible for evicting buffers which reference the next bytes of the L2ARC device to be overwritten. Teach this function to additionally TRIM that vdev space before it is overwritten if the device has been filled with data. This is done by vdev_trim_simple() which trims by issuing a new type of TRIM, TRIM_TYPE_SIMPLE. We also implement a "Trim Ahead" feature. It is a zfs module parameter, expressed in % of the current write size. This trims ahead of the current write size. A minimum of 64MB will be trimmed. The default is 0 which disables TRIM on L2ARC as it can put significant stress to underlying storage devices. To enable TRIM on L2ARC we set l2arc_trim_ahead > 0. We also implement TRIM of the whole cache device upon addition to a pool, pool creation or when the header of the device is invalid upon importing a pool or onlining a cache device. This is dependent on l2arc_trim_ahead > 0. TRIM of the whole device is done with TRIM_TYPE_MANUAL so that its status can be monitored by zpool status -t. We save the TRIM state for the whole device and the time of completion on-disk in the header, and restore these upon L2ARC rebuild so that zpool status -t can correctly report them. Whole device TRIM is done asynchronously so that the user can export of the pool or remove the cache device while it is trimming (ie if it is too slow). We do not TRIM the whole device if persistent L2ARC has been disabled by l2arc_rebuild_enabled = 0 because we may not want to lose all cached buffers (eg we may want to import the pool with l2arc_rebuild_enabled = 0 only once because of memory pressure). If persistent L2ARC has been disabled by setting the module parameter l2arc_rebuild_blocks_min_l2size to a value greater than the size of the cache device then the whole device is trimmed upon creation or import of a pool if l2arc_trim_ahead > 0. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam D. Moss <c@yotes.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #9713 Closes #9789 Closes #10224
2020-06-09 17:15:08 +00:00
'trim_integrity', 'trim_config', 'trim_l2arc']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'trim']
[tests/functional/truncate]
tests = ['truncate_001_pos', 'truncate_002_pos', 'truncate_timestamps']
tags = ['functional', 'truncate']
[tests/functional/upgrade]
tests = ['upgrade_userobj_001_pos', 'upgrade_readonly_pool']
tags = ['functional', 'upgrade']
[tests/functional/userquota]
tests = [
'userquota_001_pos', 'userquota_002_pos', 'userquota_003_pos',
'userquota_004_pos', 'userquota_005_neg', 'userquota_006_pos',
'userquota_007_pos', 'userquota_008_pos', 'userquota_009_pos',
'userquota_010_pos', 'userquota_011_pos', 'userquota_012_neg',
'userspace_001_pos', 'userspace_002_pos']
tags = ['functional', 'userquota']
[tests/functional/vdev_zaps]
tests = ['vdev_zaps_001_pos', 'vdev_zaps_002_pos', 'vdev_zaps_003_pos',
'vdev_zaps_004_pos', 'vdev_zaps_005_pos', 'vdev_zaps_006_pos',
'vdev_zaps_007_pos']
tags = ['functional', 'vdev_zaps']
[tests/functional/write_dirs]
tests = ['write_dirs_001_pos', 'write_dirs_002_pos']
tags = ['functional', 'write_dirs']
ZTS: Get xattr tests running on FreeBSD This mostly involves reworking platform checks to make illumos the exception (thanks to their unusual way of exposing xattrs). Other platforms are able to take advantage of the recently added xattr wrappers in libtest. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9872
2020-01-24 01:14:40 +00:00
[tests/functional/xattr]
tests = ['xattr_001_pos', 'xattr_002_neg', 'xattr_003_neg', 'xattr_004_pos',
'xattr_005_pos', 'xattr_006_pos', 'xattr_007_neg',
'xattr_011_pos', 'xattr_012_pos', 'xattr_013_pos']
tags = ['functional', 'xattr']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/zvol/zvol_ENOSPC]
tests = ['zvol_ENOSPC_001_pos']
tags = ['functional', 'zvol', 'zvol_ENOSPC']
[tests/functional/zvol/zvol_cli]
tests = ['zvol_cli_001_pos', 'zvol_cli_002_pos', 'zvol_cli_003_neg']
tags = ['functional', 'zvol', 'zvol_cli']
[tests/functional/zvol/zvol_misc]
ZTS: Move dumpdev tests to sunos.run Neither FreeBSD nor Linux support dumping to zvols. DilOS still uses these tests, so the files are kept and the tests have been relocated to sunos.run. An `is_illumos` function was added to libtest.shlib to eliminate some awkward platform checks. A few functions that are not expected to be used outside of illumos have been sanitized of extraneous FreeBSD adaptations. Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9794
2020-01-03 17:08:23 +00:00
tests = ['zvol_misc_002_pos', 'zvol_misc_hierarchy', 'zvol_misc_rename_inuse',
'zvol_misc_snapdev', 'zvol_misc_volmode', 'zvol_misc_zil']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'zvol', 'zvol_misc']
[tests/functional/zvol/zvol_swap]
ZTS: Move more tests out of common.run These tests won't run on all platforms as currently implemented: * add_nested_replacing_spare (needs zed) * fault (needs zed) * mmp (needs multihost_history) * umount_unlink_drained (needs procfs) * zpool_expand (needs udev events and zed) * zpool_reopen (needs scsi_debug) * zvol_swap_003_pos (needs to modify vfstab) * zvol_swap_00[56]_pos (needs swaphigh/swaplen) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9871
2020-01-27 21:29:25 +00:00
tests = ['zvol_swap_001_pos', 'zvol_swap_002_pos', 'zvol_swap_004_pos']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
tags = ['functional', 'zvol', 'zvol_swap']
[tests/functional/libzfs]
tests = ['many_fds', 'libzfs_input']
tags = ['functional', 'libzfs']
[tests/functional/log_spacemap]
tests = ['log_spacemap_import_logs']
pre =
post =
tags = ['functional', 'log_spacemap']