Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/man/man8/zdb.8

531 lines
10 KiB
Groff
Raw Normal View History

Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
'\" t
.\"
.\" This file and its contents are supplied under the terms of the
.\" Common Development and Distribution License ("CDDL"), version 1.0.
.\" You may only use this file in accordance with the terms of version
.\" 1.0 of the CDDL.
.\"
.\" A full copy of the text of the CDDL should have accompanied this
.\" source. A copy of the CDDL is also available via the Internet at
.\" http://www.illumos.org/license/CDDL.
.\"
.\"
.\" Copyright 2012, Richard Lowe.
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
.\" Copyright (c) 2012 by Delphix. All rights reserved.
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.\"
.TH "ZDB" "8" "February 15, 2012" "" ""
.SH "NAME"
\fBzdb\fR - Display zpool debugging and consistency information
.SH "SYNOPSIS"
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
\fBzdb\fR [-CumdibcsDvhLMXFPA] [-e [-p \fIpath\fR...]] [-t \fItxg\fR]
[-U \fIcache\fR] [-I \fIinflight I/Os\fR]
[\fIpoolname\fR [\fIobject\fR ...]]
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.P
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
\fBzdb\fR [-divPA] [-e [-p \fIpath\fR...]] [-U \fIcache\fR]
\fIdataset\fR [\fIobject\fR ...]
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.P
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
\fBzdb\fR -m [-MLXFPA] [-t \fItxg\fR] [-e [-p \fIpath\fR...]] [-U \fIcache\fR]
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
\fIpoolname\fR [\fIvdev\fR [\fImetaslab\fR ...]]
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.P
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
\fBzdb\fR -R [-A] [-e [-p \fIpath\fR...]] [-U \fIcache\fR] \fIpoolname\fR
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
\fIvdev\fR:\fIoffset\fR:\fIsize\fR[:\fIflags\fR]
.P
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
\fBzdb\fR -S [-AP] [-e [-p \fIpath\fR...]] [-U \fIcache\fR] \fIpoolname\fR
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.P
\fBzdb\fR -l [-uA] \fIdevice\fR
.P
\fBzdb\fR -C [-A] [-U \fIcache\fR]
.SH "DESCRIPTION"
The \fBzdb\fR utility displays information about a ZFS pool useful for
debugging and performs some amount of consistency checking. It is a not a
general purpose tool and options (and facilities) may change. This is neither
a fsck(8) nor an fsdb(8) utility.
.P
The output of this command in general reflects the on-disk structure of a ZFS
pool, and is inherently unstable. The precise output of most invocations is
not documented, a knowledge of ZFS internals is assumed.
.P
When operating on an imported and active pool it is possible, though unlikely,
that zdb may interpret inconsistent pool data and behave erratically.
.SH "OPTIONS"
Display options:
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.sp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.ne 2
.na
\fB-b\fR
.ad
.sp .6
.RS 4n
Display statistics regarding the number, size (logical, physical and
allocated) and deduplication of blocks.
.RE
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.sp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.ne 2
.na
\fB-c\fR
.ad
.sp .6
.RS 4n
Verify the checksum of all metadata blocks while printing block statistics
(see \fB-b\fR).
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.sp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
If specified multiple times, verify the checksums of all blocks.
.RE
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.sp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.ne 2
.na
\fB-C\fR
.ad
.sp .6
.RS 4n
Display information about the configuration. If specified with no other
options, instead display information about the cache file
(\fB/etc/zfs/zpool.cache\fR). To specify the cache file to display, see
\fB-U\fR.
.P
If specified multiple times, and a pool name is also specified display both
the cached configuration and the on-disk configuration. If specified multiple
times with \fB-e\fR also display the configuration that would be used were the
pool to be imported.
.RE
.sp
.ne 2
.na
\fB-d\fR
.ad
.sp .6
.RS 4n
Display information about datasets. Specified once, displays basic dataset
information: ID, create transaction, size, and object count.
.sp
If specified multiple times provides greater and greater verbosity.
.sp
If object IDs are specified, display information about those specific objects only.
.RE
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.sp
.ne 2
.na
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
\fB-D\fR
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.ad
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.sp .6
.RS 4n
Display deduplication statistics, including the deduplication ratio (dedup),
compression ratio (compress), inflation due to the zfs copies property
(copies), and an overall effective ratio (dedup * compress / copies).
.sp
If specified twice, display a histogram of deduplication statistics, showing
the allocated (physically present on disk) and referenced (logically
referenced in the pool) block counts and sizes by reference count.
Dedup-related documentation additions for zpool and zdb. Document the "-D" and "-T" options and the optional interval and count or "zpool status". Also for zpool's man page, use a consistent order for the various "-T" options to match the program's help output. Document the effect of additional "-D" options for zdb. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1786
2013-10-13 16:36:15 +00:00
.sp
If specified a third time, display the statistics independently for each deduplication table.
.sp
If specified a fourth time, dump the contents of the deduplication tables describing duplicate blocks.
.sp
If specified a fifth time, also dump the contents of the deduplication tables describing unique blocks.
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.RE
.sp
.ne 2
.na
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
\fB-h\fR
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.ad
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.sp .6
.RS 4n
Display pool history similar to \fBzpool history\fR, but include internal
changes, transaction, and dataset information.
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.RE
.sp
.ne 2
.na
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
\fB-i\fR
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.ad
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.sp .6
.RS 4n
Display information about intent log (ZIL) entries relating to each
dataset. If specified multiple times, display counts of each intent log
transaction type.
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.RE
.sp
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.ne 2
.na
\fB-l\fR \fIdevice\fR
.ad
.sp .6
.RS 4n
Display the vdev labels from the specified device. If the \fB-u\fR option is
also specified, also display the uberblocks on this device.
.RE
.sp
.ne 2
.na
\fB-L\fR
.ad
.sp .6
.RS 4n
Disable leak tracing and the loading of space maps. By default, \fBzdb\fR
verifies that all non-free blocks are referenced, which can be very expensive.
.RE
.sp
.ne 2
.na
\fB-m\fR
.ad
.sp .6
.RS 4n
Display the offset, spacemap, and free space of each metaslab.
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
When specified twice, also display information about the on-disk free
space histogram associated with each metaslab. When specified three time,
display the maximum contiguous free space, the in-core free space histogram,
and the percentage of free space in each space map. When specified
four times display every spacemap record.
.RE
.sp
.ne 2
.na
\fB-M\fR
.ad
.sp .6
.RS 4n
Display the offset, spacemap, and free space of each metaslab.
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
When specified twice, also display information about the maximum contiguous
free space and the percentage of free space in each space map. When specified
three times display every spacemap record.
.RE
.sp
.ne 2
.na
\fB-R\fR \fIpoolname\fR \fIvdev\fR:\fIoffset\fR:\fIsize\fR[:\fIflags\fR]
.ad
.sp .6
.RS 4n
Read and display a block from the specified device. By default the block is
displayed as a hex dump, but see the description of the \'r\' flag, below.
.sp
The block is specified in terms of a colon-separated tuple \fIvdev\fR (an
integer vdev identifier) \fIoffset\fR (the offset within the vdev) \fIsize\fR
(the size of the block to read) and, optionally, \fIflags\fR (a set of flags,
described below).
.sp
.ne 2
.na
\fBb\fR \fIoffset\fR
.ad
.sp .6
.RS 4n
Print block pointer
.RE
.sp
.ne 2
.na
\fBd\fR
.ad
.sp .6
.RS 4n
Decompress the block
.RE
.sp
.ne 2
.na
\fBe\fR
.ad
.sp .6
.RS 4n
Byte swap the block
.RE
.sp
.ne 2
.na
\fBg\fR
.ad
.sp .6
.RS 4n
Dump gang block header
.RE
.sp
.ne 2
.na
\fBi\fR
.ad
.sp .6
.RS 4n
Dump indirect block
.RE
.sp
.ne 2
.na
\fBr\fR
.ad
.sp .6
.RS 4n
Dump raw uninterpreted block data
.RE
.RE
.sp
.ne 2
.na
\fB-s\fR
.ad
.sp .6
.RS 4n
Report statistics on \fBzdb\fR\'s I/O. Display operation counts, bandwidth,
and error counts of I/O to the pool from \fBzdb\fR.
.RE
.sp
.ne 2
.na
\fB-S\fR
.ad
.sp .6
.RS 4n
Simulate the effects of deduplication, constructing a DDT and then display
that DDT as with \fB-DD\fR.
.RE
.sp
.ne 2
.na
\fB-u\fR
.ad
.sp .6
.RS 4n
Display the current uberblock.
.RE
.P
Other options:
.sp
.ne 2
.na
\fB-A\fR
.ad
.sp .6
.RS 4n
Do not abort should any assertion fail.
.RE
.sp
.ne 2
.na
\fB-AA\fR
.ad
.sp .6
.RS 4n
Enable panic recovery, certain errors which would otherwise be fatal are
demoted to warnings.
.RE
.sp
.ne 2
.na
\fB-AAA\fR
.ad
.sp .6
.RS 4n
Do not abort if asserts fail and also enable panic recovery.
.RE
.sp
.ne 2
.na
\fB-e\fR [-p \fIpath\fR]...
.ad
.sp .6
.RS 4n
Operate on an exported pool, not present in \fB/etc/zfs/zpool.cache\fR. The
\fB-p\fR flag specifies the path under which devices are to be searched.
.RE
.sp
.ne 2
.na
\fB-F\fR
.ad
.sp .6
.RS 4n
Attempt to make an unreadable pool readable by trying progressively older
transactions.
.RE
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
.sp
.ne 2
.na
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
\fB-I \fIinflight I/Os\fR \fR
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
.ad
.sp .6
.RS 4n
Limit the number of outstanding checksum I/Os to the specified value. The
default value is 200. This option affects the performance of the \fB-c\fR
option.
.RE
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.sp
.ne 2
.na
\fB-P\fR
.ad
.sp .6
.RS 4n
Print numbers in an unscaled form more amenable to parsing, eg. 1000000 rather
than 1M.
.RE
.sp
.ne 2
.na
\fB-t\fR \fItransaction\fR
.ad
.sp .6
.RS 4n
Specify the highest transaction to use when searching for uberblocks. See also
the \fB-u\fR and \fB-l\fR options for a means to see the available uberblocks
and their associated transaction numbers.
.RE
.sp
.ne 2
.na
\fB-U\fR \fIcachefile\fR
.ad
.sp .6
.RS 4n
Illumos #3306, #3321 3306 zdb should be able to issue reads in parallel 3321 'zpool reopen' command should be documented in the man page and help Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: illumos/illumos-gate@31d7e8fa33fae995f558673adb22641b5aa8b6e1 https://www.illumos.org/issues/3306 https://www.illumos.org/issues/3321 The vdev_file.c implementation in this patch diverges significantly from the upstream version. For consistenty with the vdev_disk.c code the upstream version leverages the Illumos bio interfaces. This makes sense for Illumos but not for ZoL for two reasons. 1) The vdev_disk.c code in ZoL has been rewritten to use the Linux block device interfaces which differ significantly from those in Illumos. Therefore, updating the vdev_file.c to use the Illumos interfaces doesn't get you consistency with vdev_disk.c. 2) Using the upstream patch as is would requiring implementing compatibility code for those Solaris block device interfaces in user and kernel space. That additional complexity could lead to confusion and doesn't buy us anything. For these reasons I've opted to simply move the existing vn_rdwr() as is in to the taskq function. This has the advantage of being low risk and easy to understand. Moving the vn_rdwr() function in to its own taskq thread also neatly avoids the possibility of a stack overflow. Finally, because of the additional work which is being handled by the free taskq the number of threads has been increased. The thread count under Illumos defaults to 100 but was decreased to 2 in commit 08d08e due to contention. We increase it to 8 until the contention can be address by porting Illumos #3581. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1354
2013-05-02 23:36:32 +00:00
Use a cache file other than \fB/etc/zfs/zpool.cache\fR.
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.RE
.sp
.ne 2
.na
\fB-v\fR
.ad
.sp .6
.RS 4n
Enable verbosity. Specify multiple times for increased verbosity.
.RE
.sp
.ne 2
.na
\fB-X\fR
.ad
.sp .6
.RS 4n
Attempt \'extreme\' transaction rewind, that is attempt the same recovery as
\fB-F\fR but read transactions otherwise deemed too old.
.RE
zdb: Introduce -V for verbatim import When given a pool name via -e, zdb would attempt an import. If it failed, then it would attempt a verbatim import. This behavior is not always desirable so a -V switch is added to zdb to control the behavior. When specified, a verbatim import is done. Otherwise, the behavior is as it was previously, except no verbatim import is done on failure. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2372
2014-06-08 18:10:14 +00:00
.sp
.ne 2
.na
\fB-V\fR
.ad
.sp .6
.RS 4n
Attempt a verbatim import. This mimics the behavior of the kernel when loading
a pool from a cachefile.
.RE
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.P
Specifying a display option more than once enables verbosity for only that
option, with more occurrences enabling more verbosity.
.P
If no options are specified, all information about the named pool will be
displayed at default verbosity.
.SH "EXAMPLES"
Pull in latest man pages as part of update-zfs.sh The script has been updated to download the latest documentations packages for Solaris and extract the needed ZFS man pages. These will still need a little markup to handle changes between the Solaris and Linux versions of ZFS. Howver, they should be pretty minor I've tried hard to keep the interface the same. In additional to the script update the zdb, zfs, and zpool man pages have been added to the repo.
2009-12-12 00:15:33 +00:00
.LP
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
\fBExample 1 \fRDisplay the configuration of imported pool 'rpool'
.sp
.in +2
.nf
# zdb -C rpool
MOS Configuration:
version: 28
name: 'rpool'
...
.fi
.in -2
.sp
.LP
\fBExample 2 \fRDisplay basic dataset information about 'rpool'
.sp
.in +2
.nf
# zdb -d rpool
Dataset mos [META], ID 0, cr_txg 4, 26.9M, 1051 objects
Dataset rpool/swap [ZVOL], ID 59, cr_txg 356, 486M, 2 objects
...
.fi
.in -2
.sp
.LP
Fix zdb.8 macro warning Detected by rpmlint the 'rpool/export/home' section was being interpretted by troff as an undefined macro. This resulted in the 'rpool/export/home' output being omitted from 'man zdb'. This was caused by starting the line with a ' character. By moving the 'in' down to the next line we're able to fix it. zfs.x86_64: W: manual-page-warning /usr/share/man/man8/zdb.8.gz 450: warning: macro `rpool/export/home'' not defined Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-02-22 19:28:28 +00:00
\fBExample 3 \fRDisplay basic information about object 0
in 'rpool/export/home'
Illumos #2088 zdb could use a reasonable manual page Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Steve Gonczi <gonczi@comcast.net> Reviewed by: Richard Elling <richard.elling@richardelling.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/2088 Ported by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #682
2012-02-04 05:44:53 +00:00
.sp
.in +2
.nf
# zdb -d rpool/export/home 0
Dataset rpool/export/home [ZPL], ID 137, cr_txg 1546, 32K, 8 objects
Object lvl iblk dblk dsize lsize %full type
0 7 16K 16K 15.0K 16K 25.00 DMU dnode
.fi
.in -2
.sp
.LP
\fBExample 4 \fRDisplay the predicted effect of enabling deduplication on 'rpool'
.sp
.in +2
.nf
# zdb -S rpool
Simulated DDT histogram:
bucket allocated referenced
______ ______________________________ ______________________________
refcnt blocks LSIZE PSIZE DSIZE blocks LSIZE PSIZE DSIZE
------ ------ ----- ----- ----- ------ ----- ----- -----
1 694K 27.1G 15.0G 15.0G 694K 27.1G 15.0G 15.0G
2 35.0K 1.33G 699M 699M 74.7K 2.79G 1.45G 1.45G
...
dedup = 1.11, compress = 1.80, copies = 1.00, dedup * compress / copies = 2.00
.fi
.in -2
.sp
.SH "SEE ALSO"
zfs(8), zpool(8)