Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/dracut/Makefile.in

669 lines
20 KiB
Makefile
Raw Normal View History

Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = dracut
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = \
Always check -Wno-unused-but-set-variable gcc support The previous commit 8a7e1ceefa430988c8f888ca708ab307333b4464 wasn't quite right. This check applies to both the user and kernel space build and as such we must make sure it runs regardless of what the --with-config option is set too. For example, if --with-config=kernel then the autoconf test does not run and we generate build warnings when compiling the kernel packages.
2011-06-14 22:09:05 +00:00
$(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
$(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
Add backing_device_info per-filesystem For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #174
2011-08-02 01:24:40 +00:00
$(top_srcdir)/config/kernel-bdi.m4 \
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
$(top_srcdir)/config/kernel-bio-failfast.m4 \
$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
$(top_srcdir)/config/kernel-blk-end-request.m4 \
$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
$(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
Fix 'zfs set volsize=N pool/dataset' This change fixes a kernel panic which would occur when resizing a dataset which was not open. The objset_t stored in the zvol_state_t will be set to NULL when the block device is closed. To avoid this issue we pass the correct objset_t as the third arg. The code has also been updated to correctly notify the kernel when the block device capacity changes. For 2.6.28 and newer kernels the capacity change will be immediately detected. For earlier kernels the capacity change will be detected when the device is next opened. This is a known limitation of older kernels. Online ext3 resize test case passes on 2.6.28+ kernels: $ dd if=/dev/zero of=/tmp/zvol bs=1M count=1 seek=1023 $ zpool create tank /tmp/zvol $ zfs create -V 500M tank/zd0 $ mkfs.ext3 /dev/zd0 $ mkdir /mnt/zd0 $ mount /dev/zd0 /mnt/zd0 $ df -h /mnt/zd0 $ zfs set volsize=800M tank/zd0 $ resize2fs /dev/zd0 $ df -h /mnt/zd0 Original-patch-by: Fajar A. Nugraha <github@fajar.net> Closes #68 Closes #84
2011-02-25 07:36:01 +00:00
$(top_srcdir)/config/kernel-check-disk-size-change.m4 \
Implemented NFS export_operations. Implemented the required NFS operations for exporting ZFS datasets using the in-kernel NFS daemon.
2011-04-28 16:35:50 +00:00
$(top_srcdir)/config/kernel-d-obtain-alias.m4 \
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
$(top_srcdir)/config/kernel-evict-inode.m4 \
$(top_srcdir)/config/kernel-fmode-t.m4 \
$(top_srcdir)/config/kernel-fsync.m4 \
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
Autogen refresh for kernel-insert-inode-locked.m4 Several Makefile.in's were accidentally not updated when the kernel-insert-inode-locked.m4 check was added. This change simply refreshes the missed files.
2011-04-18 19:48:44 +00:00
$(top_srcdir)/config/kernel-insert-inode-locked.m4 \
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
$(top_srcdir)/config/kernel-kobj-name-len.m4 \
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 18:44:07 +00:00
$(top_srcdir)/config/kernel-mount-nodev.m4 \
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
$(top_srcdir)/config/kernel-rq-is_sync.m4 \
Linux compat 2.6.39: security_inode_init_security() The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
2011-05-19 19:47:32 +00:00
$(top_srcdir)/config/kernel-security-inode-init.m4 \
Linux 3.2 compat: set_nlink() Directly changing inode->i_nlink is deprecated in Linux 3.2 by commit SHA: bfe8684869601dacfcb2cd69ef8cfd9045f62170 Use the new set_nlink() kernel function instead. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #462
2011-12-16 21:15:12 +00:00
$(top_srcdir)/config/kernel-set-nlink.m4 \
Tear down and flush the mmap region The inode eviction should unmap the pages associated with the inode. These pages should also be flushed to disk to avoid the data loss. Therefore, use truncate_setsize() in evict_inode() to release the pagecache. The API truncate_setsize() was added in 2.6.35 kernel. To ensure compatibility with the old kernel, the patch defines its own truncate_setsize function. Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com> Closes #255
2011-06-25 12:30:29 +00:00
$(top_srcdir)/config/kernel-truncate-setsize.m4 \
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
$(top_srcdir)/config/kernel-xattr-handler.m4 \
$(top_srcdir)/config/kernel.m4 \
$(top_srcdir)/config/user-arch.m4 \
$(top_srcdir)/config/user-frame-larger-than.m4 \
$(top_srcdir)/config/user-ioctl.m4 \
$(top_srcdir)/config/user-libblkid.m4 \
$(top_srcdir)/config/user-libuuid.m4 \
$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
$(top_srcdir)/config/user-selinux.m4 \
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
$(top_srcdir)/config/user-udev.m4 \
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
$(top_srcdir)/config/zfs-build.m4 \
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/zfs_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
ALIEN_VERSION = @ALIEN_VERSION@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
Provide a rc.d script for archlinux Unlike most other Linux distributions archlinux installs its init scripts in /etc/rc.d insead of /etc/init.d. This commit provides an archlinux rc.d script for zfs and extends the build infrastructure to ensure it get's installed in the correct place. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #322
2011-07-10 15:57:33 +00:00
DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DPKG = @DPKG@
DPKGBUILD = @DPKGBUILD@
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
DPKG_VERSION = @DPKG_VERSION@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
GREP = @GREP@
HAVE_ALIEN = @HAVE_ALIEN@
HAVE_DPKG = @HAVE_DPKG@
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
Add make rule for building Arch Linux packages Added the necessary build infrastructure for building packages compatible with the Arch Linux distribution. As such, one can now run: $ ./configure $ make pkg # Alternatively, one can run 'make arch' as well on the Arch Linux machine to create two binary packages compatible with the pacman package manager, one for the zfs userland utilities and another for the zfs kernel modules. The new packages can then be installed by running: # pacman -U $package.pkg.tar.xz In addition, source-only packages suitable for an Arch Linux chroot environment or remote builder can also be build using the 'sarch' make rule. NOTE: Since the source dist tarball is created on the fly from the head of the build tree, it's MD5 hash signature will be continually influx. As a result, the md5sum variable was intentionally omitted from the PKGBUILD files, and the '--skipinteg' makepkg option is used. This may or may not have any serious security implications, as the source tarball is not being downloaded from an outside source. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #491
2011-12-08 01:02:42 +00:00
HAVE_MAKEPKG = @HAVE_MAKEPKG@
HAVE_PACMAN = @HAVE_PACMAN@
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
HAVE_RPM = @HAVE_RPM@
HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KERNELCPPFLAGS = @KERNELCPPFLAGS@
KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBBLKID = @LIBBLKID@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSELINUX = @LIBSELINUX@
LIBTOOL = @LIBTOOL@
LIBUUID = @LIBUUID@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
LINUX_VERSION = @LINUX_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
Add make rule for building Arch Linux packages Added the necessary build infrastructure for building packages compatible with the Arch Linux distribution. As such, one can now run: $ ./configure $ make pkg # Alternatively, one can run 'make arch' as well on the Arch Linux machine to create two binary packages compatible with the pacman package manager, one for the zfs userland utilities and another for the zfs kernel modules. The new packages can then be installed by running: # pacman -U $package.pkg.tar.xz In addition, source-only packages suitable for an Arch Linux chroot environment or remote builder can also be build using the 'sarch' make rule. NOTE: Since the source dist tarball is created on the fly from the head of the build tree, it's MD5 hash signature will be continually influx. As a result, the md5sum variable was intentionally omitted from the PKGBUILD files, and the '--skipinteg' makepkg option is used. This may or may not have any serious security implications, as the source tarball is not being downloaded from an outside source. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #491
2011-12-08 01:02:42 +00:00
MAKEPKG = @MAKEPKG@
MAKEPKG_VERSION = @MAKEPKG_VERSION@
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
Check for -Wno-unused-but-set-variable gcc support Gcc versions 4.3.2 and earlier do not support the compiler flag -Wno-unused-but-set-variable. This can lead to build failures on older Linux platforms such as Debian Lenny. Since this is an optional build argument this changes add a new autoconf check for the option. If it is supported by the installed version of gcc then it is used otherwise it is omited. See commit's 12c1acde76683108441827ae9affba1872f3afe5 and 79713039a2b6e0ed223d141b4a8a8455f282d2f2 for the reason the -Wno-unused-but-set-variable options was originally added.
2011-06-14 18:02:13 +00:00
NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
Add make rule for building Arch Linux packages Added the necessary build infrastructure for building packages compatible with the Arch Linux distribution. As such, one can now run: $ ./configure $ make pkg # Alternatively, one can run 'make arch' as well on the Arch Linux machine to create two binary packages compatible with the pacman package manager, one for the zfs userland utilities and another for the zfs kernel modules. The new packages can then be installed by running: # pacman -U $package.pkg.tar.xz In addition, source-only packages suitable for an Arch Linux chroot environment or remote builder can also be build using the 'sarch' make rule. NOTE: Since the source dist tarball is created on the fly from the head of the build tree, it's MD5 hash signature will be continually influx. As a result, the md5sum variable was intentionally omitted from the PKGBUILD files, and the '--skipinteg' makepkg option is used. This may or may not have any serious security implications, as the source tarball is not being downloaded from an outside source. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #491
2011-12-08 01:02:42 +00:00
PACMAN = @PACMAN@
PACMAN_VERSION = @PACMAN_VERSION@
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPL = @SPL@
SPL_OBJ = @SPL_OBJ@
SPL_SYMBOLS = @SPL_SYMBOLS@
SPL_VERSION = @SPL_VERSION@
STRIP = @STRIP@
TARGET_ASM_DIR = @TARGET_ASM_DIR@
VENDOR = @VENDOR@
VERSION = @VERSION@
ZFS_CONFIG = @ZFS_CONFIG@
ZFS_META_ALIAS = @ZFS_META_ALIAS@
ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
ZFS_META_DATA = @ZFS_META_DATA@
ZFS_META_LICENSE = @ZFS_META_LICENSE@
ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
ZFS_META_NAME = @ZFS_META_NAME@
ZFS_META_RELEASE = @ZFS_META_RELEASE@
ZFS_META_VERSION = @ZFS_META_VERSION@
ZLIB = @ZLIB@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
udevdir = @udevdir@
udevruledir = @udevruledir@
Add dracut support To simplify the process of using zfs as your root filesystem a zfs-drucat sub-package has been added. This sub-package adds a zfs dracut module which allows your initramfs to be rebuilt with zfs support. The process for doing this is still complicated but there is clearly interest from the community about getting this working well and documented. This should help lay some of the groundwork. Longer term these changes should be pushed in the upstream dracut package. Once that occurs this subpackage will no longer be required for new systems, however we may want to conditionally build this package in the future for systems running older dracut versions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-17 22:18:13 +00:00
SUBDIRS = 90zfs
EXTRA_DIST = README.dracut.markdown
all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu dracut/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu dracut/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic clean-libtool \
ctags ctags-recursive distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: