Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/include/sys/Makefile.am

152 lines
2.2 KiB
Makefile
Raw Normal View History

Add zstd support to zfs This PR adds two new compression types, based on ZStandard: - zstd: A basic ZStandard compression algorithm Available compression. Levels for zstd are zstd-1 through zstd-19, where the compression increases with every level, but speed decreases. - zstd-fast: A faster version of the ZStandard compression algorithm zstd-fast is basically a "negative" level of zstd. The compression decreases with every level, but speed increases. Available compression levels for zstd-fast: - zstd-fast-1 through zstd-fast-10 - zstd-fast-20 through zstd-fast-100 (in increments of 10) - zstd-fast-500 and zstd-fast-1000 For more information check the man page. Implementation details: Rather than treat each level of zstd as a different algorithm (as was done historically with gzip), the block pointer `enum zio_compress` value is simply zstd for all levels, including zstd-fast, since they all use the same decompression function. The compress= property (a 64bit unsigned integer) uses the lower 7 bits to store the compression algorithm (matching the number of bits used in a block pointer, as the 8th bit was borrowed for embedded block pointers). The upper bits are used to store the compression level. It is necessary to be able to determine what compression level was used when later reading a block back, so the concept used in LZ4, where the first 32bits of the on-disk value are the size of the compressed data (since the allocation is rounded up to the nearest ashift), was extended, and we store the version of ZSTD and the level as well as the compressed size. This value is returned when decompressing a block, so that if the block needs to be recompressed (L2ARC, nop-write, etc), that the same parameters will be used to result in the matching checksum. All of the internal ZFS code ( `arc_buf_hdr_t`, `objset_t`, `zio_prop_t`, etc.) uses the separated _compress and _complevel variables. Only the properties ZAP contains the combined/bit-shifted value. The combined value is split when the compression_changed_cb() callback is called, and sets both objset members (os_compress and os_complevel). The userspace tools all use the combined/bit-shifted value. Additional notes: zdb can now also decode the ZSTD compression header (flag -Z) and inspect the size, version and compression level saved in that header. For each record, if it is ZSTD compressed, the parameters of the decoded compression header get printed. ZSTD is included with all current tests and new tests are added as-needed. Per-dataset feature flags now get activated when the property is set. If a compression algorithm requires a feature flag, zfs activates the feature when the property is set, rather than waiting for the first block to be born. This is currently only used by zstd but can be extended as needed. Portions-Sponsored-By: The FreeBSD Foundation Co-authored-by: Allan Jude <allanjude@freebsd.org> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-authored-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Co-authored-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Allan Jude <allanjude@freebsd.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kjeld Schouten-Lebbing <kjeld@schouten-lebbing.nl> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Closes #6247 Closes #9024 Closes #10277 Closes #10278
2020-08-18 17:10:17 +00:00
SUBDIRS = fm fs crypto lua sysevent zstd
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
COMMON_H = \
Drop unnecessary srcdir paths There's no need to specify the srcdir explicitly in _HEADERS and EXTRA_DIST. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-22 21:30:40 +00:00
abd.h \
abd_impl.h \
aggsum.h \
arc.h \
arc_impl.h \
avl.h \
avl_impl.h \
bitops.h \
blkptr.h \
bplist.h \
bpobj.h \
bptree.h \
btree.h \
bqueue.h \
dataset_kstats.h \
dbuf.h \
ddt.h \
dmu.h \
dmu_impl.h \
dmu_objset.h \
dmu_recv.h \
dmu_redact.h \
dmu_send.h \
dmu_traverse.h \
dmu_tx.h \
dmu_zfetch.h \
dnode.h \
dsl_bookmark.h \
dsl_dataset.h \
dsl_deadlist.h \
dsl_deleg.h \
dsl_destroy.h \
dsl_dir.h \
dsl_crypt.h \
dsl_pool.h \
dsl_prop.h \
dsl_scan.h \
dsl_synctask.h \
dsl_userhold.h \
edonr.h \
efi_partition.h \
frame.h \
hkdf.h \
metaslab.h \
metaslab_impl.h \
mmp.h \
mntent.h \
mod.h \
multilist.h \
nvpair.h \
nvpair_impl.h \
objlist.h \
pathname.h \
qat.h \
range_tree.h \
rrwlock.h \
sa.h \
sa_impl.h \
skein.h \
spa_boot.h \
spa_checkpoint.h \
spa_log_spacemap.h \
space_map.h \
space_reftree.h \
spa.h \
spa_impl.h \
spa_checksum.h \
sysevent.h \
txg.h \
txg_impl.h \
u8_textprep_data.h \
u8_textprep.h \
uberblock.h \
uberblock_impl.h \
uio_impl.h \
unique.h \
uuid.h \
vdev_disk.h \
vdev_file.h \
vdev.h \
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-13 21:51:51 +00:00
vdev_draid.h \
Drop unnecessary srcdir paths There's no need to specify the srcdir explicitly in _HEADERS and EXTRA_DIST. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-22 21:30:40 +00:00
vdev_impl.h \
vdev_indirect_births.h \
vdev_indirect_mapping.h \
vdev_initialize.h \
vdev_raidz.h \
vdev_raidz_impl.h \
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 18:05:50 +00:00
vdev_rebuild.h \
Drop unnecessary srcdir paths There's no need to specify the srcdir explicitly in _HEADERS and EXTRA_DIST. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-22 21:30:40 +00:00
vdev_removal.h \
vdev_trim.h \
xvattr.h \
zap.h \
zap_impl.h \
zap_leaf.h \
zcp.h \
zcp_global.h \
zcp_iter.h \
zcp_prop.h \
zcp_set.h \
zfeature.h \
zfs_acl.h \
zfs label bootenv should store data as nvlist nvlist does allow us to support different data types and systems. To encapsulate user data to/from nvlist, the libzfsbootenv library is provided. Reviewed-by: Arvind Sankar <nivedita@alum.mit.edu> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Igor Kozhukhov <igor@dilos.org> Signed-off-by: Toomas Soome <tsoome@me.com> Closes #10774
2020-09-15 22:42:27 +00:00
zfs_bootenv.h \
Drop unnecessary srcdir paths There's no need to specify the srcdir explicitly in _HEADERS and EXTRA_DIST. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-22 21:30:40 +00:00
zfs_context.h \
zfs_debug.h \
zfs_delay.h \
zfs_file.h \
zfs_fuid.h \
zfs_project.h \
zfs_quota.h \
Restore FreeBSD resource usage accounting Add zfs_racct_* interfaces for platform-dependent read/write accounting. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #11613
2021-02-20 06:34:33 +00:00
zfs_racct.h \
Drop unnecessary srcdir paths There's no need to specify the srcdir explicitly in _HEADERS and EXTRA_DIST. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-22 21:30:40 +00:00
zfs_ratelimit.h \
Rename refcount.h to zfs_refcount.h Renamed to avoid conflicting with refcount.h when a different implementation is already provided by the platform. Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #10620
2020-07-29 23:35:33 +00:00
zfs_refcount.h \
Drop unnecessary srcdir paths There's no need to specify the srcdir explicitly in _HEADERS and EXTRA_DIST. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-22 21:30:40 +00:00
zfs_rlock.h \
zfs_sa.h \
zfs_stat.h \
zfs_sysfs.h \
Add 'zfs rename -u' to rename without remounting Allow to rename file systems without remounting if it is possible. It is possible for file systems with 'mountpoint' property set to 'legacy' or 'none' - we don't have to change mount directory for them. Currently such file systems are unmounted on rename and not even mounted back. This introduces layering violation, as we need to update 'f_mntfromname' field in statfs structure related to mountpoint (for the dataset we are renaming and all its children). In my opinion it is worth it, as it allow to update FreeBSD in even cleaner way - in ZFS-only configuration root file system is ZFS file system with 'mountpoint' property set to 'legacy'. If root dataset is named system/rootfs, we can snapshot it (system/rootfs@upgrade), clone it (system/oldrootfs), update FreeBSD and if it doesn't boot we can boot back from system/oldrootfs and rename it back to system/rootfs while it is mounted as /. Before it was not possible, because unmounting / was not possible. Authored by: Pawel Jakub Dawidek <pjd@FreeBSD.org> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: Matt Macy <mmacy@freebsd.org> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10839
2020-09-01 23:14:16 +00:00
zfs_vfsops.h \
Share zfs_fsync, zfs_read, zfs_write, et al between Linux and FreeBSD The zfs_fsync, zfs_read, and zfs_write function are almost identical between Linux and FreeBSD. With a little refactoring they can be moved to the common code which is what is done by this commit. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #11078
2020-10-21 21:08:06 +00:00
zfs_vnops.h \
Drop unnecessary srcdir paths There's no need to specify the srcdir explicitly in _HEADERS and EXTRA_DIST. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-22 21:30:40 +00:00
zfs_znode.h \
zil.h \
zil_impl.h \
zio_checksum.h \
zio_compress.h \
zio_crypt.h \
zio.h \
zio_impl.h \
zio_priority.h \
zrlock.h \
zthr.h
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
KERNEL_H = \
Drop unnecessary srcdir paths There's no need to specify the srcdir explicitly in _HEADERS and EXTRA_DIST. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10493
2020-06-22 21:30:40 +00:00
zfs_ioctl.h \
zfs_ioctl_impl.h \
zfs_onexit.h \
zvol.h \
zvol_impl.h
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
if CONFIG_USER
libzfsdir = $(includedir)/libzfs/sys
Fixes for make dist Reduce the usage of EXTRA_DIST. If files are conditionally included in _SOURCES, _HEADERS etc, automake is smart enough to dist all files that could possibly be included, but this does not apply to EXTRA_DIST, resulting in make dist depending on the configuration. Add some files that were missing altogether in various Makefile's. The changes to disted files in this commit (excluding deleted files): +./cmd/zed/agents/README.md +./etc/init.d/README.md +./lib/libspl/os/freebsd/getexecname.c +./lib/libspl/os/freebsd/gethostid.c +./lib/libspl/os/freebsd/getmntany.c +./lib/libspl/os/freebsd/mnttab.c -./lib/libzfs/libzfs_core.pc -./lib/libzfs/libzfs.pc +./lib/libzfs/os/freebsd/libzfs_compat.c +./lib/libzfs/os/freebsd/libzfs_fsshare.c +./lib/libzfs/os/freebsd/libzfs_ioctl_compat.c +./lib/libzfs/os/freebsd/libzfs_zmount.c +./lib/libzutil/os/freebsd/zutil_compat.c +./lib/libzutil/os/freebsd/zutil_device_path_os.c +./lib/libzutil/os/freebsd/zutil_import_os.c +./module/lua/README.zfs +./module/os/linux/spl/README.md +./tests/README.md +./tests/zfs-tests/tests/functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh +./tests/zfs-tests/tests/functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh +./tests/zfs-tests/tests/functional/inheritance/README.config +./tests/zfs-tests/tests/functional/inheritance/README.state +./tests/zfs-tests/tests/functional/rsend/rsend_016_neg.ksh +./tests/zfs-tests/tests/perf/fio/sequential_readwrite.fio Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10501
2020-06-25 18:14:54 +00:00
libzfs_HEADERS = $(COMMON_H)
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
endif
if CONFIG_KERNEL
Avoid installing kernel headers on FreeBSD The kernel headers are installed for DKMS on linux, so don't install them unless we're building on linux. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10506
2020-06-26 21:20:30 +00:00
if BUILD_LINUX
Kernel header installation should respect --prefix This is the upstream component of work that enables preliminary support for building Gentoo's ZFS packaging on other Linux systems via Gentoo Prefix. Signed-off-by: Richard Yao <richard.yao@clusterhq.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2641
2014-08-29 15:53:09 +00:00
kerneldir = @prefix@/src/zfs-$(VERSION)/include/sys
Support custom build directories and move includes One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz tar -xzf zfs-x.y.z.tar.gz cd zfs-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This change also moves many of the include headers from individual incude/sys directories under the modules directory in to a single top level include directory. This has the advantage of making the build rules cleaner and logically it makes a bit more sense.
2010-09-04 20:26:23 +00:00
kernel_HEADERS = $(COMMON_H) $(KERNEL_H)
endif
Avoid installing kernel headers on FreeBSD The kernel headers are installed for DKMS on linux, so don't install them unless we're building on linux. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10506
2020-06-26 21:20:30 +00:00
endif