Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/include/sys/arc.h

191 lines
5.6 KiB
C
Raw Normal View History

Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
Illumos 4914 - zfs on-disk bookmark structure should be named *_phys_t 4914 zfs on-disk bookmark structure should be named *_phys_t Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Approved by: Robert Mustacchi <rm@joyent.com> References: https://www.illumos.org/issues/4914 https://github.com/illumos/illumos-gate/commit/7802d7b Porting notes: There were a number of zfsonlinux-specific uses of zbookmark_t which needed to be updated. This should reduce the likelihood of further problems like issue #2094 from occurring. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2558
2014-06-25 18:37:59 +00:00
* Copyright (c) 2012, 2014 by Delphix. All rights reserved.
Illumos #3137 L2ARC compression 3137 L2ARC compression Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Approved by: Dan McDonald <danmcd@nexenta.com> References: illumos/illumos-gate@aad02571bc59671aa3103bb070ae365f531b0b62 https://www.illumos.org/issues/3137 http://wiki.illumos.org/display/illumos/L2ARC+Compression Notes for Linux port: A l2arc_nocompress module option was added to prevent the compression of l2arc buffers regardless of how a dataset's compression property is set. This allows the legacy behavior to be preserved. Ported by: James H <james@kagisoft.co.uk> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1379
2013-08-01 20:02:10 +00:00
* Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
*/
#ifndef _SYS_ARC_H
#define _SYS_ARC_H
#include <sys/zfs_context.h>
#ifdef __cplusplus
extern "C" {
#endif
#include <sys/zio.h>
#include <sys/dmu.h>
#include <sys/spa.h>
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
#include <sys/refcount.h>
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
typedef struct arc_buf_hdr arc_buf_hdr_t;
typedef struct arc_buf arc_buf_t;
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
typedef struct arc_prune arc_prune_t;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
typedef void arc_done_func_t(zio_t *zio, arc_buf_t *buf, void *private);
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
typedef void arc_prune_func_t(int64_t bytes, void *private);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
typedef int arc_evict_func_t(void *private);
/* generic arc_done_func_t's which you can use */
arc_done_func_t arc_bcopy_func;
arc_done_func_t arc_getbuf_func;
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
/* generic arc_prune_func_t wrapper for callbacks */
struct arc_prune {
arc_prune_func_t *p_pfunc;
void *p_private;
list_node_t p_node;
refcount_t p_refcnt;
};
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
struct arc_buf {
arc_buf_hdr_t *b_hdr;
arc_buf_t *b_next;
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
kmutex_t b_evict_lock;
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void *b_data;
arc_evict_func_t *b_efunc;
void *b_private;
};
typedef enum arc_buf_contents {
ARC_BUFC_DATA, /* buffer contains data */
ARC_BUFC_METADATA, /* buffer contains metadata */
ARC_BUFC_NUMTYPES
} arc_buf_contents_t;
/*
* These are the flags we pass into calls to the arc
*/
#define ARC_WAIT (1 << 1) /* perform I/O synchronously */
#define ARC_NOWAIT (1 << 2) /* perform I/O asynchronously */
#define ARC_PREFETCH (1 << 3) /* I/O is a prefetch */
#define ARC_CACHED (1 << 4) /* I/O was already in cache */
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
#define ARC_L2CACHE (1 << 5) /* cache in L2ARC */
Illumos #3137 L2ARC compression 3137 L2ARC compression Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Approved by: Dan McDonald <danmcd@nexenta.com> References: illumos/illumos-gate@aad02571bc59671aa3103bb070ae365f531b0b62 https://www.illumos.org/issues/3137 http://wiki.illumos.org/display/illumos/L2ARC+Compression Notes for Linux port: A l2arc_nocompress module option was added to prevent the compression of l2arc buffers regardless of how a dataset's compression property is set. This allows the legacy behavior to be preserved. Ported by: James H <james@kagisoft.co.uk> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1379
2013-08-01 20:02:10 +00:00
#define ARC_L2COMPRESS (1 << 6) /* compress in L2ARC */
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Rebase master to b108
2009-02-18 20:51:31 +00:00
/*
* The following breakdows of arc_size exist for kstat only.
*/
typedef enum arc_space_type {
ARC_SPACE_DATA,
Split "data_size" into "meta" and "data" Previously, the "data_size" field in the arcstats kstat contained the amount of cached "metadata" and "data" in the ARC. The problem is this then made it difficult to extract out just the "metadata" size, or just the "data" size. To make it easier to distinguish the two values, "data_size" has been modified to count only buffers of type ARC_BUFC_DATA, and "meta_size" was added to count only buffers of type ARC_BUFC_METADATA. If one wants the old "data_size" value, simply sum the new "data_size" and "meta_size" values. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2110
2014-02-03 20:41:47 +00:00
ARC_SPACE_META,
Rebase master to b108
2009-02-18 20:51:31 +00:00
ARC_SPACE_HDRS,
ARC_SPACE_L2HDRS,
ARC_SPACE_OTHER,
ARC_SPACE_NUMTYPES
} arc_space_type_t;
Add visibility in to cached dbufs Currently there is no mechanism to inspect which dbufs are being cached by the system. There are some coarse counters in arcstats by they only give a rough idea of what's being cached. This patch aims to improve the current situation by adding a new dbufs kstat. When read this new kstat will walk all cached dbufs linked in to the dbuf_hash. For each dbuf it will dump detailed information about the buffer. It will also dump additional information about the referenced arc buffer and its related dnode. This provides a more complete view in to exactly what is being cached. With this generic infrastructure in place utilities can be written to post-process the data to understand exactly how the caching is working. For example, the data could be processed to show a list of all cached dnodes and how much space they're consuming. Or a similar list could be generated based on dnode type. Many other ways to interpret the data exist based on what kinds of questions you're trying to answer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Prakash Surya <surya1@llnl.gov>
2013-10-03 00:11:19 +00:00
typedef enum arc_state_type {
ARC_STATE_ANON,
ARC_STATE_MRU,
ARC_STATE_MRU_GHOST,
ARC_STATE_MFU,
ARC_STATE_MFU_GHOST,
ARC_STATE_L2C_ONLY,
ARC_STATE_NUMTYPES
} arc_state_type_t;
typedef struct arc_buf_info {
arc_state_type_t abi_state_type;
arc_buf_contents_t abi_state_contents;
uint64_t abi_state_index;
uint32_t abi_flags;
uint32_t abi_datacnt;
uint64_t abi_size;
uint64_t abi_spa;
uint64_t abi_access;
uint32_t abi_mru_hits;
uint32_t abi_mru_ghost_hits;
uint32_t abi_mfu_hits;
uint32_t abi_mfu_ghost_hits;
uint32_t abi_l2arc_hits;
uint32_t abi_holds;
uint64_t abi_l2arc_dattr;
uint64_t abi_l2arc_asize;
enum zio_compress abi_l2arc_compress;
} arc_buf_info_t;
Rebase master to b108
2009-02-18 20:51:31 +00:00
void arc_space_consume(uint64_t space, arc_space_type_t type);
void arc_space_return(uint64_t space, arc_space_type_t type);
Handle block pointers with a corrupt logical size The general strategy used by ZFS to verify that blocks are valid is to checksum everything. This has the advantage of being extremely robust and generically applicable regardless of the contents of the block. If a blocks checksum is valid then its contents are trusted by the higher layers. This system works exceptionally well as long as bad data is never written with a valid checksum. If this does somehow occur due to a software bug or a memory bit-flip on a non-ECC system it may result in kernel panic. One such place where this could occur is if somehow the logical size stored in a block pointer exceeds the maximum block size. This will result in an attempt to allocate a buffer greater than the maximum block size causing a system panic. To prevent this from happening the arc_read() function has been updated to detect this specific case. If a block pointer with an invalid logical size is passed it will treat the block as if it contained a checksum error. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2678
2014-09-10 18:59:03 +00:00
arc_buf_t *arc_buf_alloc(spa_t *spa, uint64_t size, void *tag,
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
arc_buf_contents_t type);
Handle block pointers with a corrupt logical size The general strategy used by ZFS to verify that blocks are valid is to checksum everything. This has the advantage of being extremely robust and generically applicable regardless of the contents of the block. If a blocks checksum is valid then its contents are trusted by the higher layers. This system works exceptionally well as long as bad data is never written with a valid checksum. If this does somehow occur due to a software bug or a memory bit-flip on a non-ECC system it may result in kernel panic. One such place where this could occur is if somehow the logical size stored in a block pointer exceeds the maximum block size. This will result in an attempt to allocate a buffer greater than the maximum block size causing a system panic. To prevent this from happening the arc_read() function has been updated to detect this specific case. If a block pointer with an invalid logical size is passed it will treat the block as if it contained a checksum error. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2678
2014-09-10 18:59:03 +00:00
arc_buf_t *arc_loan_buf(spa_t *spa, uint64_t size);
Rebase master to b117
2009-07-02 22:44:48 +00:00
void arc_return_buf(arc_buf_t *buf, void *tag);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
void arc_loan_inuse_buf(arc_buf_t *buf, void *tag);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void arc_buf_add_ref(arc_buf_t *buf, void *tag);
Illumos #3464 3464 zfs synctask code needs restructuring Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/3464 illumos/illumos-gate@3b2aab18808792cbd248a12f1edf139b89833c13 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1495
2013-09-04 12:00:57 +00:00
boolean_t arc_buf_remove_ref(arc_buf_t *buf, void *tag);
Add visibility in to cached dbufs Currently there is no mechanism to inspect which dbufs are being cached by the system. There are some coarse counters in arcstats by they only give a rough idea of what's being cached. This patch aims to improve the current situation by adding a new dbufs kstat. When read this new kstat will walk all cached dbufs linked in to the dbuf_hash. For each dbuf it will dump detailed information about the buffer. It will also dump additional information about the referenced arc buffer and its related dnode. This provides a more complete view in to exactly what is being cached. With this generic infrastructure in place utilities can be written to post-process the data to understand exactly how the caching is working. For example, the data could be processed to show a list of all cached dnodes and how much space they're consuming. Or a similar list could be generated based on dnode type. Many other ways to interpret the data exist based on what kinds of questions you're trying to answer. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Prakash Surya <surya1@llnl.gov>
2013-10-03 00:11:19 +00:00
void arc_buf_info(arc_buf_t *buf, arc_buf_info_t *abi, int state_index);
Handle block pointers with a corrupt logical size The general strategy used by ZFS to verify that blocks are valid is to checksum everything. This has the advantage of being extremely robust and generically applicable regardless of the contents of the block. If a blocks checksum is valid then its contents are trusted by the higher layers. This system works exceptionally well as long as bad data is never written with a valid checksum. If this does somehow occur due to a software bug or a memory bit-flip on a non-ECC system it may result in kernel panic. One such place where this could occur is if somehow the logical size stored in a block pointer exceeds the maximum block size. This will result in an attempt to allocate a buffer greater than the maximum block size causing a system panic. To prevent this from happening the arc_read() function has been updated to detect this specific case. If a block pointer with an invalid logical size is passed it will treat the block as if it contained a checksum error. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2678
2014-09-10 18:59:03 +00:00
uint64_t arc_buf_size(arc_buf_t *buf);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void arc_release(arc_buf_t *buf, void *tag);
int arc_released(arc_buf_t *buf);
Illumos #3112, #3113, #3114 3112 ztest does not honor ZFS_DEBUG 3113 ztest should use watchpoints to protect frozen arc bufs 3114 some leaked nvlists in zfsdev_ioctl Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Amdur <Matt.Amdur@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: https://www.illumos.org/issues/3112 https://www.illumos.org/issues/3113 https://www.illumos.org/issues/3114 illumos/illumos-gate@cd1c8b85eb30b568e9816221430c479ace7a559d The /proc/self/cmd watchpoint interface is specific to Solaris. Therefore, the #3113 implementation was reworked to use the more portable mprotect(2) system call. When the pages are watched they are marked read-only for protection. Any write to the protected address range immediately trigger a SIGSEGV. The pages are marked writable again when they are unwatched. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1489
2013-05-16 21:18:06 +00:00
void arc_buf_sigsegv(int sig, siginfo_t *si, void *unused);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void arc_buf_freeze(arc_buf_t *buf);
void arc_buf_thaw(arc_buf_t *buf);
Illumos #3145, #3212 3145 single-copy arc 3212 ztest: race condition between vdev_online() and spa_vdev_remove() Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Eric Schrock <eric.schrock@delphix.com> Reviewed by: Justin T. Gibbs <gibbs@scsiguy.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: illumos-gate/commit/9253d63df408bb48584e0b1abfcc24ef2472382e illumos changeset: 13840:97fd5cdf328a https://www.illumos.org/issues/3145 https://www.illumos.org/issues/3212 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #989 Closes #1137
2012-12-21 22:57:09 +00:00
boolean_t arc_buf_eviction_needed(arc_buf_t *buf);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#ifdef ZFS_DEBUG
int arc_referenced(arc_buf_t *buf);
#endif
Illumos #3498 panic in arc_read() 3498 panic in arc_read(): !refcount_is_zero(&pbuf->b_hdr->b_refcnt) Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Approved by: Richard Lowe <richlowe@richlowe.net> References: illumos/illumos-gate@1b912ec7100c10e7243bf0879af0fe580e08c73d https://www.illumos.org/issues/3498 Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1249
2013-07-02 20:26:24 +00:00
int arc_read(zio_t *pio, spa_t *spa, const blkptr_t *bp,
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 03:01:20 +00:00
arc_done_func_t *done, void *private, zio_priority_t priority, int flags,
Illumos 4914 - zfs on-disk bookmark structure should be named *_phys_t 4914 zfs on-disk bookmark structure should be named *_phys_t Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Approved by: Robert Mustacchi <rm@joyent.com> References: https://www.illumos.org/issues/4914 https://github.com/illumos/illumos-gate/commit/7802d7b Porting notes: There were a number of zfsonlinux-specific uses of zbookmark_t which needed to be updated. This should reduce the likelihood of further problems like issue #2094 from occurring. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2558
2014-06-25 18:37:59 +00:00
uint32_t *arc_flags, const zbookmark_phys_t *zb);
Update core ZFS code from build 121 to build 141.
2010-05-28 20:45:14 +00:00
zio_t *arc_write(zio_t *pio, spa_t *spa, uint64_t txg,
Illumos #3137 L2ARC compression 3137 L2ARC compression Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Approved by: Dan McDonald <danmcd@nexenta.com> References: illumos/illumos-gate@aad02571bc59671aa3103bb070ae365f531b0b62 https://www.illumos.org/issues/3137 http://wiki.illumos.org/display/illumos/L2ARC+Compression Notes for Linux port: A l2arc_nocompress module option was added to prevent the compression of l2arc buffers regardless of how a dataset's compression property is set. This allows the legacy behavior to be preserved. Ported by: James H <james@kagisoft.co.uk> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1379
2013-08-01 20:02:10 +00:00
blkptr_t *bp, arc_buf_t *buf, boolean_t l2arc, boolean_t l2arc_compress,
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 03:01:20 +00:00
const zio_prop_t *zp, arc_done_func_t *ready, arc_done_func_t *physdone,
arc_done_func_t *done, void *private, zio_priority_t priority,
Illumos 4914 - zfs on-disk bookmark structure should be named *_phys_t 4914 zfs on-disk bookmark structure should be named *_phys_t Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Approved by: Robert Mustacchi <rm@joyent.com> References: https://www.illumos.org/issues/4914 https://github.com/illumos/illumos-gate/commit/7802d7b Porting notes: There were a number of zfsonlinux-specific uses of zbookmark_t which needed to be updated. This should reduce the likelihood of further problems like issue #2094 from occurring. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2558
2014-06-25 18:37:59 +00:00
int zio_flags, const zbookmark_phys_t *zb);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
arc_prune_t *arc_add_prune_callback(arc_prune_func_t *func, void *private);
void arc_remove_prune_callback(arc_prune_t *p);
Illumos #3805 arc shouldn't cache freed blocks 3805 arc shouldn't cache freed blocks Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Richard Elling <richard.elling@dey-sys.com> Reviewed by: Will Andrews <will@firepipe.net> Approved by: Dan McDonald <danmcd@nexenta.com> References: illumos/illumos-gate@6e6d5868f52089b9026785bd90257a3d3f6e5ee2 https://www.illumos.org/issues/3805 ZFS should proactively evict freed blocks from the cache. On dcenter, we saw that we were caching ~256GB of metadata, while the pool only had <4GB of metadata on disk. We were wasting about half the system's RAM (252GB) on blocks that have been freed. Even though these freed blocks will never be used again, and thus will eventually be evicted, this causes us to use memory inefficiently for 2 reasons: 1. A block that is freed has no chance of being accessed again, but will be kept in memory preferentially to a block that was accessed before it (and is thus older) but has not been freed and thus has at least some chance of being accessed again. 2. We partition the ARC into several buckets: user data that has been accessed only once (MRU) metadata that has been accessed only once (MRU) user data that has been accessed more than once (MFU) metadata that has been accessed more than once (MFU) The user data vs metadata split is somewhat arbitrary, and the primary control on how much memory is used to cache data vs metadata is to simply try to keep the proportion the same as it has been in the past (each bucket "evicts against" itself). The secondary control is to evict data before evicting metadata. Because of this bucketing, we may end up with one bucket mostly containing freed blocks that are very old, while another bucket has more recently accessed, still-allocated blocks. Data in the useful bucket (with still-allocated blocks) may be evicted in preference to data in the useless bucket (with old, freed blocks). On dcenter, we saw that the MFU metadata bucket was 230MB, while the MFU data bucket was 27GB and the MRU metadata bucket was 256GB. However, the vast majority of data in the MRU metadata bucket (256GB) was freed blocks, and thus useless. Meanwhile, the MFU metadata bucket (230MB) was constantly evicting useful blocks that will be soon needed. The problem of cache segmentation is a larger problem that needs more investigation. However, if we stop caching freed blocks, it should reduce the impact of this more fundamental issue. Ported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1503
2013-06-06 22:46:55 +00:00
void arc_freed(spa_t *spa, const blkptr_t *bp);
Linux 3.1 compat, super_block->s_shrink The Linux 3.1 kernel has introduced the concept of per-filesystem shrinkers which are directly assoicated with a super block. Prior to this change there was one shared global shrinker. The zfs code relied on being able to call the global shrinker when the arc_meta_limit was exceeded. This would cause the VFS to drop references on a fraction of the dentries in the dcache. The ARC could then safely reclaim the memory used by these entries and honor the arc_meta_limit. Unfortunately, when per-filesystem shrinkers were added the old interfaces were made unavailable. This change adds support to use the new per-filesystem shrinker interface so we can continue to honor the arc_meta_limit. The major benefit of the new interface is that we can now target only the zfs filesystem for dentry and inode pruning. Thus we can minimize any impact on the caching of other filesystems. In the context of making this change several other important issues related to managing the ARC were addressed, they include: * The dnlc_reduce_cache() function which was called by the ARC to drop dentries for the Posix layer was replaced with a generic zfs_prune_t callback. The ZPL layer now registers a callback to drop these dentries removing a layering violation which dates back to the Solaris code. This callback can also be used by other ARC consumers such as Lustre. arc_add_prune_callback() arc_remove_prune_callback() * The arc_reduce_dnlc_percent module option has been changed to arc_meta_prune for clarity. The dnlc functions are specific to Solaris's VFS and have already been largely eliminated already. The replacement tunable now represents the number of bytes the prune callback will request when invoked. * Less aggressively invoke the prune callback. We used to call this whenever we exceeded the arc_meta_limit however that's not strictly correct since it results in over zeleous reclaim of dentries and inodes. It is now only called once the arc_meta_limit is exceeded and every effort has been made to evict other data from the ARC cache. * More promptly manage exceeding the arc_meta_limit. When reading meta data in to the cache if a buffer was unable to be recycled notify the arc_reclaim thread to invoke the required prune. * Added arcstat_prune kstat which is incremented when the ARC is forced to request that a consumer prune its cache. Remember this will only occur when the ARC has no other choice. If it can evict buffers safely without invoking the prune callback it will. * This change is also expected to resolve the unexpect collapses of the ARC cache. This would occur because when exceeded just the arc_meta_limit reclaim presure would be excerted on the arc_c value via arc_shrink(). This effectively shrunk the entire cache when really we just needed to reclaim meta data. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #466 Closes #292
2011-12-22 20:20:43 +00:00
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void arc_set_callback(arc_buf_t *buf, arc_evict_func_t *func, void *private);
Illumos 4631 - zvol_get_stats triggering too many reads 4631 zvol_get_stats triggering too many reads Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/4631 https://github.com/illumos/illumos-gate/commit/bbfa8ea Ported-by: Boris Protopopov <bprotopopov@hotmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2612 Closes #2480
2014-07-15 07:43:18 +00:00
boolean_t arc_clear_callback(arc_buf_t *buf);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void arc_flush(spa_t *spa);
void arc_tempreserve_clear(uint64_t reserve);
int arc_tempreserve_space(uint64_t reserve, uint64_t txg);
void arc_init(void);
void arc_fini(void);
/*
* Level 2 ARC
*/
Rebase master to b117
2009-07-02 22:44:48 +00:00
void l2arc_add_vdev(spa_t *spa, vdev_t *vd);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void l2arc_remove_vdev(vdev_t *vd);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
boolean_t l2arc_vdev_present(vdev_t *vd);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
void l2arc_init(void);
void l2arc_fini(void);
Rebase to OpenSolaris b103, in the process we are removing any code which did not originate from the OpenSolaris source. These changes will be reintroduced in topic branches for easier tracking
2008-12-03 20:09:06 +00:00
void l2arc_start(void);
void l2arc_stop(void);
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
Illumos #3112, #3113, #3114 3112 ztest does not honor ZFS_DEBUG 3113 ztest should use watchpoints to protect frozen arc bufs 3114 some leaked nvlists in zfsdev_ioctl Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Matt Amdur <Matt.Amdur@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Christopher Siden <chris.siden@delphix.com> Approved by: Eric Schrock <eric.schrock@delphix.com> References: https://www.illumos.org/issues/3112 https://www.illumos.org/issues/3113 https://www.illumos.org/issues/3114 illumos/illumos-gate@cd1c8b85eb30b568e9816221430c479ace7a559d The /proc/self/cmd watchpoint interface is specific to Solaris. Therefore, the #3113 implementation was reworked to use the more portable mprotect(2) system call. When the pages are watched they are marked read-only for protection. Any write to the protected address range immediately trigger a SIGSEGV. The pages are marked writable again when they are unwatched. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1489
2013-05-16 21:18:06 +00:00
#ifndef _KERNEL
extern boolean_t arc_watch;
#endif
Initial Linux ZFS GIT Repo
2008-11-20 20:01:55 +00:00
#ifdef __cplusplus
}
#endif
#endif /* _SYS_ARC_H */