Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/cmd/zed/Makefile.am

87 lines
1.8 KiB
Makefile
Raw Normal View History

Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
include $(top_srcdir)/config/Rules.am
DEFAULT_INCLUDES += \
-I$(top_srcdir)/include \
-I$(top_srcdir)/lib/libspl/include
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
EXTRA_DIST = zed.d/README
Cleanup ZEDLETs This commit factors out several common ZEDLET code blocks into zed-functions.sh. This shortens the length of the scripts, thereby (hopefully) making them easier to understand and maintain. In addition, this commit revamps the coding style used by the scripts to be more consistent and (again, hopefully) maintainable. It now mostly follows the Google Shell Style Guide. I've tried to assimilate the following resources: Google Shell Style Guide https://google-styleguide.googlecode.com/svn/trunk/shell.xml Dash as /bin/sh https://wiki.ubuntu.com/DashAsBinSh Filenames and Pathnames in Shell: How to do it Correctly http://www.dwheeler.com/essays/filenames-in-shell.html Common shell script mistakes http://www.pixelbeat.org/programming/shell_script_mistakes.html Finally, this commit updates the exit codes used by the ZEDLETs to be more consistent with one another. All scripts run cleanly through ShellCheck <http://www.shellcheck.net/>. All scripts have been tested on bash and dash. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
2015-02-18 01:23:54 +00:00
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
sbin_PROGRAMS = zed
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
ZED_SRC = \
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
zed.c \
zed.h \
zed_conf.c \
zed_conf.h \
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
zed_disk_event.c \
zed_disk_event.h \
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
zed_event.c \
zed_event.h \
zed_exec.c \
zed_exec.h \
zed_file.c \
zed_file.h \
zed_log.c \
zed_log.h \
zed_strings.c \
zed_strings.h
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
FMA_SRC = \
agents/zfs_agents.h \
agents/zfs_diagnosis.c \
agents/zfs_mod.c \
agents/zfs_retire.c
zed_SOURCES = $(ZED_SRC) $(FMA_SRC)
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
zed_LDADD = \
$(top_builddir)/lib/libavl/libavl.la \
$(top_builddir)/lib/libnvpair/libnvpair.la \
$(top_builddir)/lib/libspl/libspl.la \
Fix build error when make deb After 53698a4, the following error occurs when make deb. CCLD zed ../../lib/libzfs/.libs/libzfs.so: undefined reference to `get_system_hostid' Add libzpool.la to zed/Makefile.am to fix this Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3080
2015-02-06 07:22:10 +00:00
$(top_builddir)/lib/libzpool/libzpool.la \
zed needs libzfs_core As of a recent group of Illumos/Delphix updates, zed needs libzfs_core in order to resolve lzc_get_bookmarks() and likely other functions going forward. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2534
2014-06-15 13:47:40 +00:00
$(top_builddir)/lib/libzfs/libzfs.la \
$(top_builddir)/lib/libzfs_core/libzfs_core.la
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
zedconfdir = $(sysconfdir)/zfs/zed.d
dist_zedconf_DATA = \
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
zed.d/zed-functions.sh \
zed.d/zed.rc
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
zedexecdir = $(libexecdir)/zfs/zed.d
dist_zedexec_SCRIPTS = \
Support parallel build trees (VPATH builds) Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082
2014-06-09 21:55:31 +00:00
zed.d/all-debug.sh \
zed.d/all-syslog.sh \
zed.d/checksum-notify.sh \
zed.d/checksum-spare.sh \
zed.d/data-notify.sh \
zed.d/generic-notify.sh \
zed.d/io-notify.sh \
zed.d/io-spare.sh \
OpenZFS 5997 - FRU field not set during pool creation and never updated Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com> Reviewed by: Dan Fields <dan.fields@nexenta.com> Reviewed by: Josef Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Signed-off-by: Don Brady <don.brady@intel.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/5997 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283 Porting Notes: In addition to the OpenZFS changes this patch realigns the events with those found in OpenZFS. Events which would be logged as sysevents on illumos have been been mapped to the 'sysevent' class for Linux. In addition, several subclass names have been changed to match what is used in OpenZFS. In all cases this means a '.' was changed to an '_' in the subclass. The scripts provided by ZoL have been updated, however users which provide scripts for any of the following events will need to rename them based on the new subclass names. ereport.fs.zfs.config.sync sysevent.fs.zfs.config_sync ereport.fs.zfs.zpool.destroy sysevent.fs.zfs.pool_destroy ereport.fs.zfs.zpool.reguid sysevent.fs.zfs.pool_reguid ereport.fs.zfs.vdev.remove sysevent.fs.zfs.vdev_remove ereport.fs.zfs.vdev.clear sysevent.fs.zfs.vdev_clear ereport.fs.zfs.vdev.check sysevent.fs.zfs.vdev_check ereport.fs.zfs.vdev.spare sysevent.fs.zfs.vdev_spare ereport.fs.zfs.vdev.autoexpand sysevent.fs.zfs.vdev_autoexpand ereport.fs.zfs.resilver.start sysevent.fs.zfs.resilver_start ereport.fs.zfs.resilver.finish sysevent.fs.zfs.resilver_finish ereport.fs.zfs.scrub.start sysevent.fs.zfs.scrub_start ereport.fs.zfs.scrub.finish sysevent.fs.zfs.scrub_finish ereport.fs.zfs.bootfs.vdev.attach sysevent.fs.zfs.bootfs_vdev_attach
2016-07-27 22:29:15 +00:00
zed.d/resilver_finish-notify.sh \
Multipath autoreplace, control enclosure LEDs, event rate limiting 1. Enable multipath autoreplace support for FMA. This extends FMA autoreplace to work with multipath disks. This requires libdevmapper to be installed at build time. 2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure LED for a drive when a drive becomes FAULTED/DEGRADED. Your enclosure must be supported by the Linux SES driver for this to work. The enclosure LED scripts work for multipath devices as well. The scripts will clear the LED when the fault is cleared. 3. Rate limit ZIO delay and checksum events so as not to flood ZED ZIO delay and checksum events are rate limited to 5/sec in the zfs module. Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #2449 Closes #3017 Closes #5159
2016-10-19 19:55:59 +00:00
zed.d/scrub_finish-notify.sh \
zed.d/statechange-led.sh \
zed.d/vdev_clear-led.sh
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
zedconfdefaults = \
all-syslog.sh \
Replace "email" ZEDLETs with "notify" ZEDLETs Several ZEDLETs already exist for sending email in reponse to a particular zevent. While email is ubiquitous, alternative methods may be better suited for some configurations. Instead of duplicating the "email" ZEDLETs for every future notification method, it is preferable to abstract the notification method into a function. This has the added benefit of reducing the amount of code duplicated between ZEDLETs, and allowing related bugs to be fixed in a single location. This commit replaces the existing "email" ZEDLETs with corresponding "notify" ZEDLETs. In addition, the ZEDLET code for sending an email message has been moved into the zed_notify_email() function. And this zed_notify_email() has been added to a generic zed_notify() function for sending notifications via all available methods that have been configured. This commit also changes a couple of related zed.rc variables. ZED_EMAIL_INTERVAL_SECS is changed to ZED_NOTIFY_INTERVAL_SECS, and ZED_EMAIL_VERBOSE is changed to ZED_NOTIFY_VERBOSE. Note that ZED_EMAIL remains unchanged as its use is solely for the email notification method. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
2015-02-27 00:26:25 +00:00
checksum-notify.sh \
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
checksum-spare.sh \
Replace "email" ZEDLETs with "notify" ZEDLETs Several ZEDLETs already exist for sending email in reponse to a particular zevent. While email is ubiquitous, alternative methods may be better suited for some configurations. Instead of duplicating the "email" ZEDLETs for every future notification method, it is preferable to abstract the notification method into a function. This has the added benefit of reducing the amount of code duplicated between ZEDLETs, and allowing related bugs to be fixed in a single location. This commit replaces the existing "email" ZEDLETs with corresponding "notify" ZEDLETs. In addition, the ZEDLET code for sending an email message has been moved into the zed_notify_email() function. And this zed_notify_email() has been added to a generic zed_notify() function for sending notifications via all available methods that have been configured. This commit also changes a couple of related zed.rc variables. ZED_EMAIL_INTERVAL_SECS is changed to ZED_NOTIFY_INTERVAL_SECS, and ZED_EMAIL_VERBOSE is changed to ZED_NOTIFY_VERBOSE. Note that ZED_EMAIL remains unchanged as its use is solely for the email notification method. Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
2015-02-27 00:26:25 +00:00
data-notify.sh \
io-notify.sh \
Add automatic hot spare functionality When a vdev starts getting I/O or checksum errors it is now possible to automatically rebuild to a hot spare device. To cleanly support this functionality in a shell script some additional information was added to all zevent ereports which include a vdev. This covers both io and checksum zevents but may be used but other scripts. In the Illumos FMA solution the same information is required but it is retrieved through the libzfs library interface. Specifically the following members were added: vdev_spare_paths - List of vdev paths for all hot spares. vdev_spare_guids - List of vdev guids for all hot spares. vdev_read_errors - Read errors for the problematic vdev vdev_write_errors - Write errors for the problematic vdev vdev_cksum_errors - Checksum errors for the problematic vdev. By default the required hot spare scripts are installed but this functionality is disabled. To enable hot sparing uncomment the ZED_SPARE_ON_IO_ERRORS and ZED_SPARE_ON_CHECKSUM_ERRORS in the /etc/zfs/zed.d/zed.rc configuration file. These scripts do no add support for the autoexpand property. At a minimum this requires adding a new udev rule to detect when a new device is added to the system. It also requires that the autoexpand policy be ported from Illumos, see: https://github.com/illumos/illumos-gate/blob/master/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c Support for detecting the correct name of a vdev when it's not a whole disk was added by Turbo Fredriksson. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Issue #2
2014-01-24 23:47:46 +00:00
io-spare.sh \
OpenZFS 5997 - FRU field not set during pool creation and never updated Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com> Reviewed by: Dan Fields <dan.fields@nexenta.com> Reviewed by: Josef Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Approved by: Robert Mustacchi <rm@joyent.com> Signed-off-by: Don Brady <don.brady@intel.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/5997 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1437283 Porting Notes: In addition to the OpenZFS changes this patch realigns the events with those found in OpenZFS. Events which would be logged as sysevents on illumos have been been mapped to the 'sysevent' class for Linux. In addition, several subclass names have been changed to match what is used in OpenZFS. In all cases this means a '.' was changed to an '_' in the subclass. The scripts provided by ZoL have been updated, however users which provide scripts for any of the following events will need to rename them based on the new subclass names. ereport.fs.zfs.config.sync sysevent.fs.zfs.config_sync ereport.fs.zfs.zpool.destroy sysevent.fs.zfs.pool_destroy ereport.fs.zfs.zpool.reguid sysevent.fs.zfs.pool_reguid ereport.fs.zfs.vdev.remove sysevent.fs.zfs.vdev_remove ereport.fs.zfs.vdev.clear sysevent.fs.zfs.vdev_clear ereport.fs.zfs.vdev.check sysevent.fs.zfs.vdev_check ereport.fs.zfs.vdev.spare sysevent.fs.zfs.vdev_spare ereport.fs.zfs.vdev.autoexpand sysevent.fs.zfs.vdev_autoexpand ereport.fs.zfs.resilver.start sysevent.fs.zfs.resilver_start ereport.fs.zfs.resilver.finish sysevent.fs.zfs.resilver_finish ereport.fs.zfs.scrub.start sysevent.fs.zfs.scrub_start ereport.fs.zfs.scrub.finish sysevent.fs.zfs.scrub_finish ereport.fs.zfs.bootfs.vdev.attach sysevent.fs.zfs.bootfs_vdev_attach
2016-07-27 22:29:15 +00:00
resilver_finish-notify.sh \
Multipath autoreplace, control enclosure LEDs, event rate limiting 1. Enable multipath autoreplace support for FMA. This extends FMA autoreplace to work with multipath disks. This requires libdevmapper to be installed at build time. 2. Turn on/off fault LEDs when VDEVs become degraded/faulted/online Set ZED_USE_ENCLOSURE_LEDS=1 in zed.rc to have ZED turn on/off the enclosure LED for a drive when a drive becomes FAULTED/DEGRADED. Your enclosure must be supported by the Linux SES driver for this to work. The enclosure LED scripts work for multipath devices as well. The scripts will clear the LED when the fault is cleared. 3. Rate limit ZIO delay and checksum events so as not to flood ZED ZIO delay and checksum events are rate limited to 5/sec in the zfs module. Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #2449 Closes #3017 Closes #5159
2016-10-19 19:55:59 +00:00
scrub_finish-notify.sh \
statechange-blinkled.sh \
vdev_clear-blinkled.sh
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
Add support for Pushbullet notifications This commit adds the zed_notify_pushbullet() function and hooks it into zed_notify(), thereby integrating it with the existing "notify" ZEDLETs. This enables ZED to push notifications to your desktop computer and/or mobile device(s). It is configured with the ZED_PUSHBULLET_ACCESS_TOKEN and ZED_PUSHBULLET_CHANNEL_TAG variables in zed.rc. https://www.pushbullet.com/ The Makefile install-data-local target has been replaced with install-data-hook. With the "-local" target, there is no particular guarantee of execution order. But with the zed.rc now potentially containing sensitive information (i.e., the Pushbullet access token), the recommended permissions have changed to 0600. The "-hook" target is always executed after the main rule's work is done; thus, the chmod will always take place after the zed.rc file has been installed. https://www.gnu.org/software/automake/manual/automake.html#Extending Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
2015-02-27 00:26:48 +00:00
install-data-hook:
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
$(MKDIR_P) "$(DESTDIR)$(zedconfdir)"
for f in $(zedconfdefaults); do \
test -f "$(DESTDIR)$(zedconfdir)/$${f}" -o \
-L "$(DESTDIR)$(zedconfdir)/$${f}" || \
ln -s "$(zedexecdir)/$${f}" "$(DESTDIR)$(zedconfdir)"; \
done
Add support for Pushbullet notifications This commit adds the zed_notify_pushbullet() function and hooks it into zed_notify(), thereby integrating it with the existing "notify" ZEDLETs. This enables ZED to push notifications to your desktop computer and/or mobile device(s). It is configured with the ZED_PUSHBULLET_ACCESS_TOKEN and ZED_PUSHBULLET_CHANNEL_TAG variables in zed.rc. https://www.pushbullet.com/ The Makefile install-data-local target has been replaced with install-data-hook. With the "-local" target, there is no particular guarantee of execution order. But with the zed.rc now potentially containing sensitive information (i.e., the Pushbullet access token), the recommended permissions have changed to 0600. The "-hook" target is always executed after the main rule's work is done; thus, the chmod will always take place after the zed.rc file has been installed. https://www.gnu.org/software/automake/manual/automake.html#Extending Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
2015-02-27 00:26:48 +00:00
chmod 0600 "$(DESTDIR)$(zedconfdir)/zed.rc"