zfs/lib/libzfs/libzfs_status.c

487 lines
13 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
2008-11-20 20:01:55 +00:00
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2012 by Delphix. All rights reserved.
* Copyright (c) 2013 Steven Hartland. All rights reserved.
2008-11-20 20:01:55 +00:00
*/
/*
* This file contains the functions which analyze the status of a pool. This
* include both the status of an active pool, as well as the status exported
* pools. Returns one of the ZPOOL_STATUS_* defines describing the status of
* the pool. This status is independent (to a certain degree) from the state of
* the pool. A pool's state describes only whether or not it is capable of
* providing the necessary fault tolerance for data. The status describes the
* overall status of devices. A pool that is online can still have a device
* that is experiencing errors.
*
* Only a subset of the possible faults can be detected using 'zpool status',
* and not all possible errors correspond to a FMA message ID. The explanation
* is left up to the caller, depending on whether it is a live pool or an
* import.
*/
#include <libzfs.h>
#include <string.h>
#include <unistd.h>
Add libtpool (thread pools) OpenZFS provides a library called tpool which implements thread pools for user space applications. Porting this library means the zpool utility no longer needs to borrow the kernel mutex and taskq interfaces from libzpool. This code was updated to use the tpool library which behaves in a very similar fashion. Porting libtpool was relatively straight forward and minimal modifications were needed. The core changes were: * Fully convert the library to use pthreads. * Updated signal handling. * lmalloc/lfree converted to calloc/free * Implemented portable pthread_attr_clone() function. Finally, update the build system such that libzpool.so is no longer linked in to zfs(8), zpool(8), etc. All that is required is libzfs to which the zcommon soures were added (which is the way it always should have been). Removing the libzpool dependency resulted in several build issues which needed to be resolved. * Moved zfeature support to module/zcommon/zfeature_common.c * Moved ratelimiting to to module/zfs/zfs_ratelimit.c * Moved get_system_hostid() to lib/libspl/gethostid.c * Removed use of cmn_err() in zcommon source * Removed dprintf_setup() call from zpool_main.c and zfs_main.c * Removed highbit() and lowbit() * Removed unnecessary library dependencies from Makefiles * Removed fletcher-4 kstat in user space * Added sha2 support explicitly to libzfs * Added highbit64() and lowbit64() to zpool_util.c Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6442
2017-08-09 22:31:08 +00:00
#include <sys/systeminfo.h>
2008-11-20 20:01:55 +00:00
#include "libzfs_impl.h"
#include "zfeature_common.h"
2008-11-20 20:01:55 +00:00
/*
* Message ID table. This must be kept in sync with the ZPOOL_STATUS_* defines
* in libzfs.h. Note that there are some status results which go past the end
* of this table, and hence have no associated message ID.
*/
static char *zfs_msgid_table[] = {
"ZFS-8000-14",
"ZFS-8000-2Q",
"ZFS-8000-3C",
"ZFS-8000-4J",
"ZFS-8000-5E",
"ZFS-8000-6X",
"ZFS-8000-72",
"ZFS-8000-8A",
"ZFS-8000-9P",
"ZFS-8000-A5",
"ZFS-8000-EY",
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
"ZFS-8000-EY",
"ZFS-8000-EY",
"ZFS-8000-HC",
"ZFS-8000-JQ",
"ZFS-8000-K4",
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
"ZFS-8000-ER",
2008-11-20 20:01:55 +00:00
};
#define NMSGID (sizeof (zfs_msgid_table) / sizeof (zfs_msgid_table[0]))
/* ARGSUSED */
static int
vdev_missing(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_CANT_OPEN &&
aux == VDEV_AUX_OPEN_FAILED);
}
/* ARGSUSED */
static int
vdev_faulted(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_FAULTED);
}
/* ARGSUSED */
static int
vdev_errors(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_DEGRADED || errs != 0);
}
/* ARGSUSED */
static int
vdev_broken(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_CANT_OPEN);
}
/* ARGSUSED */
static int
vdev_offlined(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_OFFLINE);
}
2009-08-18 18:43:27 +00:00
/* ARGSUSED */
static int
vdev_removed(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_REMOVED);
}
2008-11-20 20:01:55 +00:00
/*
* Detect if any leaf devices that have seen errors or could not be opened.
*/
static boolean_t
find_vdev_problem(nvlist_t *vdev, int (*func)(uint64_t, uint64_t, uint64_t))
{
nvlist_t **child;
vdev_stat_t *vs;
uint_t c, children;
char *type;
/*
* Ignore problems within a 'replacing' vdev, since we're presumably in
* the process of repairing any such errors, and don't want to call them
* out again. We'll pick up the fact that a resilver is happening
* later.
*/
verify(nvlist_lookup_string(vdev, ZPOOL_CONFIG_TYPE, &type) == 0);
if (strcmp(type, VDEV_TYPE_REPLACING) == 0)
return (B_FALSE);
if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_CHILDREN, &child,
&children) == 0) {
for (c = 0; c < children; c++)
if (find_vdev_problem(child[c], func))
return (B_TRUE);
} else {
verify(nvlist_lookup_uint64_array(vdev, ZPOOL_CONFIG_VDEV_STATS,
2008-11-20 20:01:55 +00:00
(uint64_t **)&vs, &c) == 0);
if (func(vs->vs_state, vs->vs_aux,
vs->vs_read_errors +
vs->vs_write_errors +
vs->vs_checksum_errors))
return (B_TRUE);
}
/*
* Check any L2 cache devs
*/
if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_L2CACHE, &child,
&children) == 0) {
for (c = 0; c < children; c++)
if (find_vdev_problem(child[c], func))
return (B_TRUE);
}
2008-11-20 20:01:55 +00:00
return (B_FALSE);
}
/*
* Active pool health status.
*
* To determine the status for a pool, we make several passes over the config,
* picking the most egregious error we find. In order of importance, we do the
* following:
*
* - Check for a complete and valid configuration
* - Look for any faulted or missing devices in a non-replicated config
* - Check for any data errors
* - Check for any faulted or missing devices in a replicated config
* - Look for any devices showing errors
* - Check for any resilvering devices
*
* There can obviously be multiple errors within a single pool, so this routine
* only picks the most damaging of all the current errors to report.
*/
static zpool_status_t
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
check_status(nvlist_t *config, boolean_t isimport, zpool_errata_t *erratap)
2008-11-20 20:01:55 +00:00
{
nvlist_t *nvroot;
vdev_stat_t *vs;
pool_scan_stat_t *ps = NULL;
uint_t vsc, psc;
2008-11-20 20:01:55 +00:00
uint64_t nerr;
uint64_t version;
uint64_t stateval;
uint64_t suspended;
2008-11-20 20:01:55 +00:00
uint64_t hostid = 0;
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
uint64_t errata = 0;
unsigned long system_hostid = get_system_hostid();
2008-11-20 20:01:55 +00:00
verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION,
&version) == 0);
verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
&nvroot) == 0);
verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_VDEV_STATS,
2008-11-20 20:01:55 +00:00
(uint64_t **)&vs, &vsc) == 0);
verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE,
&stateval) == 0);
/*
* Currently resilvering a vdev
*/
(void) nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_SCAN_STATS,
(uint64_t **)&ps, &psc);
if (ps != NULL && ps->pss_func == POOL_SCAN_RESILVER &&
ps->pss_state == DSS_SCANNING)
return (ZPOOL_STATUS_RESILVERING);
2008-11-20 20:01:55 +00:00
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
/*
* The multihost property is set and the pool may be active.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_ACTIVE) {
mmp_state_t mmp_state;
nvlist_t *nvinfo;
nvinfo = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO);
mmp_state = fnvlist_lookup_uint64(nvinfo,
ZPOOL_CONFIG_MMP_STATE);
if (mmp_state == MMP_STATE_ACTIVE)
return (ZPOOL_STATUS_HOSTID_ACTIVE);
else if (mmp_state == MMP_STATE_NO_HOSTID)
return (ZPOOL_STATUS_HOSTID_REQUIRED);
else
return (ZPOOL_STATUS_HOSTID_MISMATCH);
}
2008-11-20 20:01:55 +00:00
/*
* Pool last accessed by another system.
*/
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_HOSTID, &hostid);
if (hostid != 0 && (unsigned long)hostid != system_hostid &&
2008-11-20 20:01:55 +00:00
stateval == POOL_STATE_ACTIVE)
return (ZPOOL_STATUS_HOSTID_MISMATCH);
/*
* Newer on-disk version.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_VERSION_NEWER)
return (ZPOOL_STATUS_VERSION_NEWER);
/*
* Unsupported feature(s).
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_UNSUP_FEAT) {
nvlist_t *nvinfo;
verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO,
&nvinfo) == 0);
if (nvlist_exists(nvinfo, ZPOOL_CONFIG_CAN_RDONLY))
return (ZPOOL_STATUS_UNSUP_FEAT_WRITE);
return (ZPOOL_STATUS_UNSUP_FEAT_READ);
}
2008-11-20 20:01:55 +00:00
/*
* Check that the config is complete.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_BAD_GUID_SUM)
return (ZPOOL_STATUS_BAD_GUID_SUM);
/*
* Check whether the pool has suspended due to failed I/O.
*/
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_SUSPENDED,
&suspended) == 0) {
if (suspended == ZIO_FAILURE_MODE_CONTINUE)
return (ZPOOL_STATUS_IO_FAILURE_CONTINUE);
return (ZPOOL_STATUS_IO_FAILURE_WAIT);
}
/*
* Could not read a log.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_BAD_LOG) {
return (ZPOOL_STATUS_BAD_LOG);
}
2008-11-20 20:01:55 +00:00
/*
* Bad devices in non-replicated config.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
find_vdev_problem(nvroot, vdev_faulted))
return (ZPOOL_STATUS_FAULTED_DEV_NR);
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
find_vdev_problem(nvroot, vdev_missing))
return (ZPOOL_STATUS_MISSING_DEV_NR);
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
find_vdev_problem(nvroot, vdev_broken))
return (ZPOOL_STATUS_CORRUPT_LABEL_NR);
/*
* Corrupted pool metadata
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_CORRUPT_DATA)
return (ZPOOL_STATUS_CORRUPT_POOL);
/*
* Persistent data errors.
*/
if (!isimport) {
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRCOUNT,
&nerr) == 0 && nerr != 0)
return (ZPOOL_STATUS_CORRUPT_DATA);
}
/*
* Missing devices in a replicated config.
*/
if (find_vdev_problem(nvroot, vdev_faulted))
return (ZPOOL_STATUS_FAULTED_DEV_R);
if (find_vdev_problem(nvroot, vdev_missing))
return (ZPOOL_STATUS_MISSING_DEV_R);
if (find_vdev_problem(nvroot, vdev_broken))
return (ZPOOL_STATUS_CORRUPT_LABEL_R);
/*
* Devices with errors
*/
if (!isimport && find_vdev_problem(nvroot, vdev_errors))
return (ZPOOL_STATUS_FAILING_DEV);
/*
* Offlined devices
*/
if (find_vdev_problem(nvroot, vdev_offlined))
return (ZPOOL_STATUS_OFFLINE_DEV);
2009-08-18 18:43:27 +00:00
/*
* Removed device
*/
if (find_vdev_problem(nvroot, vdev_removed))
return (ZPOOL_STATUS_REMOVED_DEV);
Encryption Stability and On-Disk Format Fixes The on-disk format for encrypted datasets protects not only the encrypted and authenticated blocks themselves, but also the order and interpretation of these blocks. In order to make this work while maintaining the ability to do raw sends, the indirect bps maintain a secure checksum of all the MACs in the block below it along with a few other fields that determine how the data is interpreted. Unfortunately, the current on-disk format erroneously includes some fields which are not portable and thus cannot support raw sends. It is not possible to easily work around this issue due to a separate and much smaller bug which causes indirect blocks for encrypted dnodes to not be compressed, which conflicts with the previous bug. In addition, the current code generates incompatible on-disk formats on big endian and little endian systems due to an issue with how block pointers are authenticated. Finally, raw send streams do not currently include dn_maxblkid when sending both the metadnode and normal dnodes which are needed in order to ensure that we are correctly maintaining the portable objset MAC. This patch zero's out the offending fields when computing the bp MAC and ensures that these MACs are always calculated in little endian order (regardless of the host system's byte order). This patch also registers an errata for the old on-disk format, which we detect by adding a "version" field to newly created DSL Crypto Keys. We allow datasets without a version (version 0) to only be mounted for read so that they can easily be migrated. We also now include dn_maxblkid in raw send streams to ensure the MAC can be maintained correctly. This patch also contains minor bug fixes and cleanups. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #6845 Closes #6864 Closes #7052
2017-11-08 19:12:59 +00:00
/*
* Informational errata available.
*/
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRATA, &errata);
if (errata) {
*erratap = errata;
return (ZPOOL_STATUS_ERRATA);
}
2008-11-20 20:01:55 +00:00
/*
* Outdated, but usable, version
*/
if (SPA_VERSION_IS_SUPPORTED(version) && version != SPA_VERSION)
2008-11-20 20:01:55 +00:00
return (ZPOOL_STATUS_VERSION_OLDER);
/*
* Usable pool with disabled features
*/
if (version >= SPA_VERSION_FEATURES) {
int i;
nvlist_t *feat;
if (isimport) {
feat = fnvlist_lookup_nvlist(config,
ZPOOL_CONFIG_LOAD_INFO);
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
if (nvlist_exists(feat, ZPOOL_CONFIG_ENABLED_FEAT))
feat = fnvlist_lookup_nvlist(feat,
ZPOOL_CONFIG_ENABLED_FEAT);
} else {
feat = fnvlist_lookup_nvlist(config,
ZPOOL_CONFIG_FEATURE_STATS);
}
for (i = 0; i < SPA_FEATURES; i++) {
zfeature_info_t *fi = &spa_feature_table[i];
if (!nvlist_exists(feat, fi->fi_guid))
return (ZPOOL_STATUS_FEAT_DISABLED);
}
}
2008-11-20 20:01:55 +00:00
return (ZPOOL_STATUS_OK);
}
zpool_status_t
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
zpool_get_status(zpool_handle_t *zhp, char **msgid, zpool_errata_t *errata)
2008-11-20 20:01:55 +00:00
{
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
zpool_status_t ret = check_status(zhp->zpool_config, B_FALSE, errata);
2008-11-20 20:01:55 +00:00
if (ret >= NMSGID)
*msgid = NULL;
else
*msgid = zfs_msgid_table[ret];
return (ret);
}
zpool_status_t
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
zpool_import_status(nvlist_t *config, char **msgid, zpool_errata_t *errata)
2008-11-20 20:01:55 +00:00
{
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
zpool_status_t ret = check_status(config, B_TRUE, errata);
2008-11-20 20:01:55 +00:00
if (ret >= NMSGID)
*msgid = NULL;
else
*msgid = zfs_msgid_table[ret];
return (ret);
}
static void
dump_ddt_stat(const ddt_stat_t *dds, int h)
{
char refcnt[6];
char blocks[6], lsize[6], psize[6], dsize[6];
char ref_blocks[6], ref_lsize[6], ref_psize[6], ref_dsize[6];
if (dds == NULL || dds->dds_blocks == 0)
return;
if (h == -1)
(void) strcpy(refcnt, "Total");
else
zfs_nicenum(1ULL << h, refcnt, sizeof (refcnt));
zfs_nicenum(dds->dds_blocks, blocks, sizeof (blocks));
zfs_nicebytes(dds->dds_lsize, lsize, sizeof (lsize));
zfs_nicebytes(dds->dds_psize, psize, sizeof (psize));
zfs_nicebytes(dds->dds_dsize, dsize, sizeof (dsize));
zfs_nicenum(dds->dds_ref_blocks, ref_blocks, sizeof (ref_blocks));
zfs_nicebytes(dds->dds_ref_lsize, ref_lsize, sizeof (ref_lsize));
zfs_nicebytes(dds->dds_ref_psize, ref_psize, sizeof (ref_psize));
zfs_nicebytes(dds->dds_ref_dsize, ref_dsize, sizeof (ref_dsize));
(void) printf("%6s %6s %5s %5s %5s %6s %5s %5s %5s\n",
refcnt,
blocks, lsize, psize, dsize,
ref_blocks, ref_lsize, ref_psize, ref_dsize);
}
/*
* Print the DDT histogram and the column totals.
*/
void
zpool_dump_ddt(const ddt_stat_t *dds_total, const ddt_histogram_t *ddh)
{
int h;
(void) printf("\n");
(void) printf("bucket "
" allocated "
" referenced \n");
(void) printf("______ "
"______________________________ "
"______________________________\n");
(void) printf("%6s %6s %5s %5s %5s %6s %5s %5s %5s\n",
"refcnt",
"blocks", "LSIZE", "PSIZE", "DSIZE",
"blocks", "LSIZE", "PSIZE", "DSIZE");
(void) printf("%6s %6s %5s %5s %5s %6s %5s %5s %5s\n",
"------",
"------", "-----", "-----", "-----",
"------", "-----", "-----", "-----");
for (h = 0; h < 64; h++)
dump_ddt_stat(&ddh->ddh_stat[h], h);
dump_ddt_stat(dds_total, -1);
(void) printf("\n");
}