Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/include/linux/blkdev_compat.h

651 lines
18 KiB
C
Raw Normal View History

Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
/*
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
* Copyright (C) 2011 Lawrence Livermore National Security, LLC.
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Written by Brian Behlendorf <behlendorf1@llnl.gov>.
* LLNL-CODE-403049.
*/
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#ifndef _ZFS_BLKDEV_H
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define _ZFS_BLKDEV_H
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
#include <linux/blkdev.h>
#include <linux/elevator.h>
Enable Linux read-ahead for a single page on ZVOLs Linux has read-ahead logic designed to accelerate sequential workloads. ZFS has its own read-ahead logic called zprefetch that operates on both ZVOLs and datasets. Having two prefetchers active at the same time can cause overprefetching, which unnecessarily reduces IOPS performance on CoW filesystems like ZFS. Testing shows that entirely disabling the Linux prefetch results in a significant performance penalty for reads while commensurate benefits are seen in random writes. It appears that read-ahead benefits are inversely proportional to random write benefits, and so a single page of Linux-layer read-ahead appears to offer the middle ground for both workloads. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Issue #5902
2014-07-11 18:35:58 +00:00
#include <linux/backing-dev.h>
Update build system and packaging Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> TEST_ZIMPORT_SKIP="yes" Closes #7556
2018-02-16 01:53:18 +00:00
#include <linux/hdreg.h>
Linux compat 4.18: check_disk_size_change() Added support for the bops->check_events() interface which was added in the 2.6.38 kernel to replace bops->media_changed(). Fully implementing this functionality allows the volume resize code to rely on revalidate_disk(), which is the preferred mechanism, and removes the need to use check_disk_size_change(). In order for bops->check_events() to lookup the zvol_state_t stored in the disk->private_data the zvol_state_lock needs to be held. Since the check events interface may poll the mutex has been converted to a rwlock for better concurrently. The rwlock need only be taken as a writer in the zvol_free() path when disk->private_data is set to NULL. The configure checks for the block_device_operations structure were consolidated in a single kernel-block-device-operations.m4 file. The ZFS_AC_KERNEL_BDEV_BLOCK_DEVICE_OPERATIONS configure checks and assoicated dead code was removed. This interface was added to the 2.6.28 kernel which predates the oldest supported 2.6.32 kernel and will therefore always be available. Updated maximum Linux version in META file. The 4.17 kernel was released on 2018-06-03 and ZoL is compatible with the finalized kernel. Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com> Reviewed-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7611
2018-06-15 22:05:21 +00:00
#include <linux/msdos_fs.h> /* for SECTOR_* */
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
#ifndef HAVE_FMODE_T
typedef unsigned __bitwise__ fmode_t;
#endif /* HAVE_FMODE_T */
Linux compat 4.16: blk_queue_flag_{set,clear} queue_flag_{set,clear}_unlocked are now private interfaces in the Linux kernel (https://github.com/torvalds/linux/commit/8a0ac14). Use blk_queue_flag_{set,clear} interfaces which were introduced as of https://github.com/torvalds/linux/commit/8814ce8. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #7410
2018-04-10 17:32:14 +00:00
#ifndef HAVE_BLK_QUEUE_FLAG_SET
static inline void
blk_queue_flag_set(unsigned int flag, struct request_queue *q)
{
Linux compat 4.16: blk_queue_flag_{set,clear} The HAVE_BLK_QUEUE_WRITE_CACHE_GPL_ONLY case was overlooked in the original 10f88c5c commit because blk_queue_write_cache() was available for the in-kernel builds. Update the blk_queue_flag_{set,clear} wrappers to call the locked versions to avoid confusion. This is safe for all existing callers. The blk_queue_set_write_cache() function has been updated to use these wrappers. This means setting/clearing both QUEUE_FLAG_WC and QUEUE_FLAG_FUA is no longer atomic but this only done early in zvol_alloc() prior to any requests so there is no issue. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Kash Pande <kash@tripleback.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7428 Closes #7431
2018-04-13 02:46:14 +00:00
queue_flag_set(flag, q);
Linux compat 4.16: blk_queue_flag_{set,clear} queue_flag_{set,clear}_unlocked are now private interfaces in the Linux kernel (https://github.com/torvalds/linux/commit/8a0ac14). Use blk_queue_flag_{set,clear} interfaces which were introduced as of https://github.com/torvalds/linux/commit/8814ce8. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #7410
2018-04-10 17:32:14 +00:00
}
#endif
#ifndef HAVE_BLK_QUEUE_FLAG_CLEAR
static inline void
blk_queue_flag_clear(unsigned int flag, struct request_queue *q)
{
Linux compat 4.16: blk_queue_flag_{set,clear} The HAVE_BLK_QUEUE_WRITE_CACHE_GPL_ONLY case was overlooked in the original 10f88c5c commit because blk_queue_write_cache() was available for the in-kernel builds. Update the blk_queue_flag_{set,clear} wrappers to call the locked versions to avoid confusion. This is safe for all existing callers. The blk_queue_set_write_cache() function has been updated to use these wrappers. This means setting/clearing both QUEUE_FLAG_WC and QUEUE_FLAG_FUA is no longer atomic but this only done early in zvol_alloc() prior to any requests so there is no issue. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Kash Pande <kash@tripleback.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7428 Closes #7431
2018-04-13 02:46:14 +00:00
queue_flag_clear(flag, q);
Linux compat 4.16: blk_queue_flag_{set,clear} queue_flag_{set,clear}_unlocked are now private interfaces in the Linux kernel (https://github.com/torvalds/linux/commit/8a0ac14). Use blk_queue_flag_{set,clear} interfaces which were introduced as of https://github.com/torvalds/linux/commit/8814ce8. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #7410
2018-04-10 17:32:14 +00:00
}
#endif
Fix synchronicity for ZVOLs. zvol_write() assumes that the write request must be written to stable storage if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed, "sync" does *not* mean what we think it means in the context of the Linux block layer. This is well explained in linux/fs.h: WRITE: A normal async write. Device will be plugged. WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down the hint that someone will be waiting on this IO shortly. WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush. WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on non-volatile media on completion. In other words, SYNC does not *mean* that the write must be on stable storage on completion. It just means that someone is waiting on us to complete the write request. Thus triggering a ZIL commit for each SYNC write request on a ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL users have no way to express that they actually want data to be written to stable storage, which means the ZIL is broken for ZVOLs. The request for stable storage is expressed by the FUA flag, so we must commit the ZIL after the write if the FUA flag is set. In addition, we must commit the ZIL before the write if the FLUSH flag is set. Also, we must inform the block layer that we actually support FLUSH and FUA. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 09:11:38 +00:00
/*
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
* 4.7 - 4.x API,
* The blk_queue_write_cache() interface has replaced blk_queue_flush()
* interface. However, the new interface is GPL-only thus we implement
* our own trivial wrapper when the GPL-only version is detected.
*
* 2.6.36 - 4.6 API,
Fix synchronicity for ZVOLs. zvol_write() assumes that the write request must be written to stable storage if rq_is_sync() is true. Unfortunately, this assumption is incorrect. Indeed, "sync" does *not* mean what we think it means in the context of the Linux block layer. This is well explained in linux/fs.h: WRITE: A normal async write. Device will be plugged. WRITE_SYNC: Synchronous write. Identical to WRITE, but passes down the hint that someone will be waiting on this IO shortly. WRITE_FLUSH: Like WRITE_SYNC but with preceding cache flush. WRITE_FUA: Like WRITE_SYNC but data is guaranteed to be on non-volatile media on completion. In other words, SYNC does not *mean* that the write must be on stable storage on completion. It just means that someone is waiting on us to complete the write request. Thus triggering a ZIL commit for each SYNC write request on a ZVOL is unnecessary and harmful for performance. To make matters worse, ZVOL users have no way to express that they actually want data to be written to stable storage, which means the ZIL is broken for ZVOLs. The request for stable storage is expressed by the FUA flag, so we must commit the ZIL after the write if the FUA flag is set. In addition, we must commit the ZIL before the write if the FLUSH flag is set. Also, we must inform the block layer that we actually support FLUSH and FUA. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 09:11:38 +00:00
* The blk_queue_flush() interface has replaced blk_queue_ordered()
* interface. However, while the old interface was available to all the
* new one is GPL-only. Thus if the GPL-only version is detected we
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
* implement our own trivial helper.
*
* 2.6.x - 2.6.35
* Legacy blk_queue_ordered() interface.
Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cache Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4665
2016-05-18 20:45:39 +00:00
*/
static inline void
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
blk_queue_set_write_cache(struct request_queue *q, bool wc, bool fua)
Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cache Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4665
2016-05-18 20:45:39 +00:00
{
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
#if defined(HAVE_BLK_QUEUE_WRITE_CACHE_GPL_ONLY)
Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cache Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4665
2016-05-18 20:45:39 +00:00
if (wc)
Linux compat 4.16: blk_queue_flag_{set,clear} The HAVE_BLK_QUEUE_WRITE_CACHE_GPL_ONLY case was overlooked in the original 10f88c5c commit because blk_queue_write_cache() was available for the in-kernel builds. Update the blk_queue_flag_{set,clear} wrappers to call the locked versions to avoid confusion. This is safe for all existing callers. The blk_queue_set_write_cache() function has been updated to use these wrappers. This means setting/clearing both QUEUE_FLAG_WC and QUEUE_FLAG_FUA is no longer atomic but this only done early in zvol_alloc() prior to any requests so there is no issue. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Kash Pande <kash@tripleback.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7428 Closes #7431
2018-04-13 02:46:14 +00:00
blk_queue_flag_set(QUEUE_FLAG_WC, q);
Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cache Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4665
2016-05-18 20:45:39 +00:00
else
Linux compat 4.16: blk_queue_flag_{set,clear} The HAVE_BLK_QUEUE_WRITE_CACHE_GPL_ONLY case was overlooked in the original 10f88c5c commit because blk_queue_write_cache() was available for the in-kernel builds. Update the blk_queue_flag_{set,clear} wrappers to call the locked versions to avoid confusion. This is safe for all existing callers. The blk_queue_set_write_cache() function has been updated to use these wrappers. This means setting/clearing both QUEUE_FLAG_WC and QUEUE_FLAG_FUA is no longer atomic but this only done early in zvol_alloc() prior to any requests so there is no issue. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Kash Pande <kash@tripleback.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7428 Closes #7431
2018-04-13 02:46:14 +00:00
blk_queue_flag_clear(QUEUE_FLAG_WC, q);
Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cache Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4665
2016-05-18 20:45:39 +00:00
if (fua)
Linux compat 4.16: blk_queue_flag_{set,clear} The HAVE_BLK_QUEUE_WRITE_CACHE_GPL_ONLY case was overlooked in the original 10f88c5c commit because blk_queue_write_cache() was available for the in-kernel builds. Update the blk_queue_flag_{set,clear} wrappers to call the locked versions to avoid confusion. This is safe for all existing callers. The blk_queue_set_write_cache() function has been updated to use these wrappers. This means setting/clearing both QUEUE_FLAG_WC and QUEUE_FLAG_FUA is no longer atomic but this only done early in zvol_alloc() prior to any requests so there is no issue. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Kash Pande <kash@tripleback.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7428 Closes #7431
2018-04-13 02:46:14 +00:00
blk_queue_flag_set(QUEUE_FLAG_FUA, q);
Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cache Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4665
2016-05-18 20:45:39 +00:00
else
Linux compat 4.16: blk_queue_flag_{set,clear} The HAVE_BLK_QUEUE_WRITE_CACHE_GPL_ONLY case was overlooked in the original 10f88c5c commit because blk_queue_write_cache() was available for the in-kernel builds. Update the blk_queue_flag_{set,clear} wrappers to call the locked versions to avoid confusion. This is safe for all existing callers. The blk_queue_set_write_cache() function has been updated to use these wrappers. This means setting/clearing both QUEUE_FLAG_WC and QUEUE_FLAG_FUA is no longer atomic but this only done early in zvol_alloc() prior to any requests so there is no issue. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Kash Pande <kash@tripleback.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7428 Closes #7431
2018-04-13 02:46:14 +00:00
blk_queue_flag_clear(QUEUE_FLAG_FUA, q);
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
#elif defined(HAVE_BLK_QUEUE_WRITE_CACHE)
blk_queue_write_cache(q, wc, fua);
#elif defined(HAVE_BLK_QUEUE_FLUSH_GPL_ONLY)
if (wc)
q->flush_flags |= REQ_FLUSH;
if (fua)
q->flush_flags |= REQ_FUA;
#elif defined(HAVE_BLK_QUEUE_FLUSH)
blk_queue_flush(q, (wc ? REQ_FLUSH : 0) | (fua ? REQ_FUA : 0));
#else
blk_queue_ordered(q, QUEUE_ORDERED_DRAIN, NULL);
Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cache Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4665
2016-05-18 20:45:39 +00:00
#endif
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
}
Linux 4.7 compat: replace blk_queue_flush with blk_queue_write_cache Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4665
2016-05-18 20:45:39 +00:00
Linux 2.6.36 compat, blk_* macros removed Most of the blk_* macros were removed in 2.6.36. Ostensibly this was done to improve readability and allow easier grepping. However, from a portability stand point the macros are helpful. Therefore the needed macros are redefined here if they are missing from the kernel.
2010-11-11 00:38:14 +00:00
/*
* Most of the blk_* macros were removed in 2.6.36. Ostensibly this was
* done to improve readability and allow easier grepping. However, from
* a portability stand point the macros are helpful. Therefore the needed
* macros are redefined here if they are missing from the kernel.
*/
#ifndef blk_fs_request
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define blk_fs_request(rq) ((rq)->cmd_type == REQ_TYPE_FS)
Linux 2.6.36 compat, blk_* macros removed Most of the blk_* macros were removed in 2.6.36. Ostensibly this was done to improve readability and allow easier grepping. However, from a portability stand point the macros are helpful. Therefore the needed macros are redefined here if they are missing from the kernel.
2010-11-11 00:38:14 +00:00
#endif
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 13:15:45 +00:00
/*
* 2.6.34 API change,
* The blk_queue_max_hw_sectors() function replaces blk_queue_max_sectors().
*/
#ifndef HAVE_BLK_QUEUE_MAX_HW_SECTORS
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define blk_queue_max_hw_sectors __blk_queue_max_hw_sectors
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 13:15:45 +00:00
static inline void
__blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
{
blk_queue_max_sectors(q, max_hw_sectors);
}
#endif
/*
* 2.6.34 API change,
* The blk_queue_max_segments() function consolidates
* blk_queue_max_hw_segments() and blk_queue_max_phys_segments().
*/
#ifndef HAVE_BLK_QUEUE_MAX_SEGMENTS
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define blk_queue_max_segments __blk_queue_max_segments
Improve ZVOL queue behavior. The Linux block device queue subsystem exposes a number of configurable settings described in Linux block/blk-settings.c. The defaults for these settings are tuned for hard drives, and are not optimized for ZVOLs. Proper configuration of these options would allow upper layers (I/O scheduler) to take better decisions about write merging and ordering. Detailed rationale: - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to handle writes of any size, so there's no reason to impose a limit. Let the upper layer decide. - max_segments and max_segment_size are set to unlimited. zvol_write() will copy the requests' contents into a dbuf anyway, so the number and size of the segments are irrelevant. Let the upper layer decide. - physical_block_size and io_opt are set to the ZVOL's block size. This has the potential to somewhat alleviate issue #361 for ZVOLs, by warning the upper layers that writes smaller than the volume's block size will be slow. - The NONROT flag is set to indicate this isn't a rotational device. Although the backing zpool might be composed of rotational devices, the resulting ZVOL often doesn't exhibit the same behavior due to the COW mechanisms used by ZFS. Setting this flag will prevent upper layers from making useless decisions (such as reordering writes) based on incorrect assumptions about the behavior of the ZVOL. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-05 13:15:45 +00:00
static inline void
__blk_queue_max_segments(struct request_queue *q, unsigned short max_segments)
{
blk_queue_max_phys_segments(q, max_segments);
blk_queue_max_hw_segments(q, max_segments);
}
#endif
Enable Linux read-ahead for a single page on ZVOLs Linux has read-ahead logic designed to accelerate sequential workloads. ZFS has its own read-ahead logic called zprefetch that operates on both ZVOLs and datasets. Having two prefetchers active at the same time can cause overprefetching, which unnecessarily reduces IOPS performance on CoW filesystems like ZFS. Testing shows that entirely disabling the Linux prefetch results in a significant performance penalty for reads while commensurate benefits are seen in random writes. It appears that read-ahead benefits are inversely proportional to random write benefits, and so a single page of Linux-layer read-ahead appears to offer the middle ground for both workloads. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <ryao@gentoo.org> Issue #5902
2014-07-11 18:35:58 +00:00
static inline void
blk_queue_set_read_ahead(struct request_queue *q, unsigned long ra_pages)
{
#ifdef HAVE_BLK_QUEUE_BDI_DYNAMIC
q->backing_dev_info->ra_pages = ra_pages;
#else
q->backing_dev_info.ra_pages = ra_pages;
#endif
}
Linux 4.16 compat: get_disk_and_module() As of https://github.com/torvalds/linux/commit/fb6d47a, get_disk() is now get_disk_and_module(). Add a configure check to determine if we need to use get_disk_and_module(). Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #7264
2018-03-05 20:44:35 +00:00
#ifndef HAVE_GET_DISK_AND_MODULE
static inline struct kobject *
get_disk_and_module(struct gendisk *disk)
{
return (get_disk(disk));
}
#endif
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
#ifndef HAVE_GET_DISK_RO
static inline int
get_disk_ro(struct gendisk *disk)
{
int policy = 0;
if (disk->part[0])
policy = disk->part[0]->policy;
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
return (policy);
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
}
#endif /* HAVE_GET_DISK_RO */
Linux 3.14 compat: Immutable biovec changes in vdev_disk.c bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter. This patch creates BIO_BI_*(bio) macros to hide the differences. Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2124
2014-03-28 07:08:21 +00:00
#ifdef HAVE_BIO_BVEC_ITER
#define BIO_BI_SECTOR(bio) (bio)->bi_iter.bi_sector
#define BIO_BI_SIZE(bio) (bio)->bi_iter.bi_size
#define BIO_BI_IDX(bio) (bio)->bi_iter.bi_idx
Use uio for zvol_{read,write} Since uio now supports bvec, we can convert bio into uio and reuse dmu_{read,write}_uio. This way, we can remove some duplicate code. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4078
2015-12-08 20:37:24 +00:00
#define BIO_BI_SKIP(bio) (bio)->bi_iter.bi_bvec_done
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#define bio_for_each_segment4(bv, bvp, b, i) \
bio_for_each_segment((bv), (b), (i))
typedef struct bvec_iter bvec_iterator_t;
Linux 3.14 compat: Immutable biovec changes in vdev_disk.c bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter. This patch creates BIO_BI_*(bio) macros to hide the differences. Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2124
2014-03-28 07:08:21 +00:00
#else
#define BIO_BI_SECTOR(bio) (bio)->bi_sector
#define BIO_BI_SIZE(bio) (bio)->bi_size
#define BIO_BI_IDX(bio) (bio)->bi_idx
Use uio for zvol_{read,write} Since uio now supports bvec, we can convert bio into uio and reuse dmu_{read,write}_uio. This way, we can remove some duplicate code. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4078
2015-12-08 20:37:24 +00:00
#define BIO_BI_SKIP(bio) (0)
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#define bio_for_each_segment4(bv, bvp, b, i) \
bio_for_each_segment((bvp), (b), (i))
typedef int bvec_iterator_t;
Linux 3.14 compat: Immutable biovec changes in vdev_disk.c bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter. This patch creates BIO_BI_*(bio) macros to hide the differences. Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2124
2014-03-28 07:08:21 +00:00
#endif
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* Portable helper for correctly setting the FAILFAST flags. The
* correct usage has changed 3 times from 2.6.12 to 2.6.38.
*/
Add FAILFAST support ZFS works best when it is notified as soon as possible when a device failure occurs. This allows it to immediately start any recovery actions which may be needed. In theory Linux supports a flag which can be set on bio's called FAILFAST which provides this quick notification by disabling the retry logic in the lower scsi layers. That's the theory at least. In practice is turns out that while the flag exists you oddly have to set it with the BIO_RW_AHEAD flag. And even when it's set it you may get retries in the low level drivers decides that's the right behavior, or if you don't get the right error codes reported to the scsi midlayer. Unfortunately, without additional kernels patchs there's not much which can be done to improve this. Basically, this just means that it may take 2-3 minutes before a ZFS is notified properly that a device has failed. This can be improved and I suspect I'll be submitting patches upstream to handle this.
2010-10-01 17:57:56 +00:00
static inline void
bio_set_flags_failfast(struct block_device *bdev, int *flags)
{
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
#ifdef CONFIG_BUG
Add FAILFAST support ZFS works best when it is notified as soon as possible when a device failure occurs. This allows it to immediately start any recovery actions which may be needed. In theory Linux supports a flag which can be set on bio's called FAILFAST which provides this quick notification by disabling the retry logic in the lower scsi layers. That's the theory at least. In practice is turns out that while the flag exists you oddly have to set it with the BIO_RW_AHEAD flag. And even when it's set it you may get retries in the low level drivers decides that's the right behavior, or if you don't get the right error codes reported to the scsi midlayer. Unfortunately, without additional kernels patchs there's not much which can be done to improve this. Basically, this just means that it may take 2-3 minutes before a ZFS is notified properly that a device has failed. This can be improved and I suspect I'll be submitting patches upstream to handle this.
2010-10-01 17:57:56 +00:00
/*
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
* Disable FAILFAST for loopback devices because of the
* following incorrect BUG_ON() in loop_make_request().
Add FAILFAST support ZFS works best when it is notified as soon as possible when a device failure occurs. This allows it to immediately start any recovery actions which may be needed. In theory Linux supports a flag which can be set on bio's called FAILFAST which provides this quick notification by disabling the retry logic in the lower scsi layers. That's the theory at least. In practice is turns out that while the flag exists you oddly have to set it with the BIO_RW_AHEAD flag. And even when it's set it you may get retries in the low level drivers decides that's the right behavior, or if you don't get the right error codes reported to the scsi midlayer. Unfortunately, without additional kernels patchs there's not much which can be done to improve this. Basically, this just means that it may take 2-3 minutes before a ZFS is notified properly that a device has failed. This can be improved and I suspect I'll be submitting patches upstream to handle this.
2010-10-01 17:57:56 +00:00
* This support is also disabled for md devices because the
* test suite layers md devices on top of loopback devices.
* This may be removed when the loopback driver is fixed.
*
* BUG_ON(!lo || (rw != READ && rw != WRITE));
*/
if ((MAJOR(bdev->bd_dev) == LOOP_MAJOR) ||
(MAJOR(bdev->bd_dev) == MD_MAJOR))
return;
#ifdef BLOCK_EXT_MAJOR
if (MAJOR(bdev->bd_dev) == BLOCK_EXT_MAJOR)
return;
#endif /* BLOCK_EXT_MAJOR */
#endif /* CONFIG_BUG */
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
Linux 2.6.36 compat, use REQ_FAILFAST_MASK and remove pre-2.6.36 support Commit f4af6bb783b0b7f2a6075cb1c74c225db8a157b2 which added support for REQ_FAILFAST_MASK but the new autoconf test didn't use the same preprocessor macro name as the code did. The effect is that FAILFAST mode has not been enabled for ZoL in any post-2.6.35 kernel. Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels. Raise an error condition if the FAILFAST interface can't be detected. Signed-off-by: Tim Chase <tim@onlight.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3386
2015-05-08 20:49:56 +00:00
#if defined(HAVE_BIO_RW_FAILFAST_DTD)
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
/* BIO_RW_FAILFAST_* preferred interface from 2.6.28 - 2.6.35 */
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
*flags |= (
(1 << BIO_RW_FAILFAST_DEV) |
(1 << BIO_RW_FAILFAST_TRANSPORT) |
(1 << BIO_RW_FAILFAST_DRIVER));
Linux 2.6.36 compat, use REQ_FAILFAST_MASK and remove pre-2.6.36 support Commit f4af6bb783b0b7f2a6075cb1c74c225db8a157b2 which added support for REQ_FAILFAST_MASK but the new autoconf test didn't use the same preprocessor macro name as the code did. The effect is that FAILFAST mode has not been enabled for ZoL in any post-2.6.35 kernel. Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels. Raise an error condition if the FAILFAST interface can't be detected. Signed-off-by: Tim Chase <tim@onlight.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3386
2015-05-08 20:49:56 +00:00
#elif defined(HAVE_REQ_FAILFAST_MASK)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
/*
* REQ_FAILFAST_* preferred interface from 2.6.36 - 2.6.xx,
* the BIO_* and REQ_* flags were unified under REQ_* flags.
*/
Linux 2.6.36 compat, use REQ_FAILFAST_MASK As of linux-2.6.36 the BIO_RW_FAILFAST and REQ_FAILFAST flags have been unified under the REQ_* names. These flags always had to be kept in-sync so this is a nice step forward, unfortunately it means we need to be careful to only use the new unified flags when the BIO_RW_* flags are not defined. Additional autoconf checks were added for this and if it is ever unclear which method to use no flags are set. This is safe but may result in longer delays before a disk is failed. Perferred interface for setting FAILFAST on a bio: 2.6.12-2.6.27: BIO_RW_FAILFAST 2.6.28-2.6.35: BIO_RW_FAILFAST_{DEV|TRANSPORT|DRIVER} 2.6.36-2.6.xx: REQ_FAILFAST_{DEV|TRANSPORT|DRIVER}
2010-11-10 22:40:38 +00:00
*flags |= REQ_FAILFAST_MASK;
Linux 2.6.36 compat, use REQ_FAILFAST_MASK and remove pre-2.6.36 support Commit f4af6bb783b0b7f2a6075cb1c74c225db8a157b2 which added support for REQ_FAILFAST_MASK but the new autoconf test didn't use the same preprocessor macro name as the code did. The effect is that FAILFAST mode has not been enabled for ZoL in any post-2.6.35 kernel. Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels. Raise an error condition if the FAILFAST interface can't be detected. Signed-off-by: Tim Chase <tim@onlight.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3386
2015-05-08 20:49:56 +00:00
#else
#error "Undefined block IO FAILFAST interface."
#endif
Add FAILFAST support ZFS works best when it is notified as soon as possible when a device failure occurs. This allows it to immediately start any recovery actions which may be needed. In theory Linux supports a flag which can be set on bio's called FAILFAST which provides this quick notification by disabling the retry logic in the lower scsi layers. That's the theory at least. In practice is turns out that while the flag exists you oddly have to set it with the BIO_RW_AHEAD flag. And even when it's set it you may get retries in the low level drivers decides that's the right behavior, or if you don't get the right error codes reported to the scsi midlayer. Unfortunately, without additional kernels patchs there's not much which can be done to improve this. Basically, this just means that it may take 2-3 minutes before a ZFS is notified properly that a device has failed. This can be improved and I suspect I'll be submitting patches upstream to handle this.
2010-10-01 17:57:56 +00:00
}
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* Maximum disk label length, it may be undefined for some kernels.
*/
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
#ifndef DISK_NAME_LEN
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define DISK_NAME_LEN 32
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
#endif /* DISK_NAME_LEN */
Linux 4.13 compat: bio->bi_status and blk_status_t Commit torvalds/linux@4e4cbee9. The bio->bi_error field was replaced with bio->bi_status which is an enum that describes all possible error types. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6351
2017-07-24 02:37:12 +00:00
#ifdef HAVE_BIO_BI_STATUS
static inline int
bi_status_to_errno(blk_status_t status)
{
switch (status) {
case BLK_STS_OK:
return (0);
case BLK_STS_NOTSUPP:
return (EOPNOTSUPP);
case BLK_STS_TIMEOUT:
return (ETIMEDOUT);
case BLK_STS_NOSPC:
return (ENOSPC);
case BLK_STS_TRANSPORT:
return (ENOLINK);
case BLK_STS_TARGET:
return (EREMOTEIO);
case BLK_STS_NEXUS:
return (EBADE);
case BLK_STS_MEDIUM:
return (ENODATA);
case BLK_STS_PROTECTION:
return (EILSEQ);
case BLK_STS_RESOURCE:
return (ENOMEM);
case BLK_STS_AGAIN:
return (EAGAIN);
case BLK_STS_IOERR:
return (EIO);
default:
return (EIO);
}
}
static inline blk_status_t
errno_to_bi_status(int error)
{
switch (error) {
case 0:
return (BLK_STS_OK);
case EOPNOTSUPP:
return (BLK_STS_NOTSUPP);
case ETIMEDOUT:
return (BLK_STS_TIMEOUT);
case ENOSPC:
return (BLK_STS_NOSPC);
case ENOLINK:
return (BLK_STS_TRANSPORT);
case EREMOTEIO:
return (BLK_STS_TARGET);
case EBADE:
return (BLK_STS_NEXUS);
case ENODATA:
return (BLK_STS_MEDIUM);
case EILSEQ:
return (BLK_STS_PROTECTION);
case ENOMEM:
return (BLK_STS_RESOURCE);
case EAGAIN:
return (BLK_STS_AGAIN);
case EIO:
return (BLK_STS_IOERR);
default:
return (BLK_STS_IOERR);
}
}
#endif /* HAVE_BIO_BI_STATUS */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
Linux 4.3 compat: bio_end_io_t / BIO_UPTODATE Commit torvalds/linux@4246a0b63bd8f56a1469b12eafeb875b1041a451 ("block: add a bi_error field to struct bio") dropped the error argument from bio_endio in favor of newly introduced bio->bi_error. This also replaces bio->bi_flags value BIO_UPTODATE. bio_endio was a 3 argument function until Linux 2.6.24, which made it a 2 argument function, and now the prototype has changed yet again to a 1 argument function. Support for pre 2.6.24 kernels was already dropped with 37f9dac592bf ("zvol processing should use struct bio") which assumed the 2 argument version in zvol_request(). Remaining code to support the 3 argument version is hereby removed. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Lukas Wunner <lukas@wunner.de> Issue #3799
2015-09-23 15:55:15 +00:00
* 4.3 API change
* The bio_endio() prototype changed slightly. These are helper
* macro's to ensure the prototype and invocation are handled.
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
*/
Linux 4.3 compat: bio_end_io_t / BIO_UPTODATE Commit torvalds/linux@4246a0b63bd8f56a1469b12eafeb875b1041a451 ("block: add a bi_error field to struct bio") dropped the error argument from bio_endio in favor of newly introduced bio->bi_error. This also replaces bio->bi_flags value BIO_UPTODATE. bio_endio was a 3 argument function until Linux 2.6.24, which made it a 2 argument function, and now the prototype has changed yet again to a 1 argument function. Support for pre 2.6.24 kernels was already dropped with 37f9dac592bf ("zvol processing should use struct bio") which assumed the 2 argument version in zvol_request(). Remaining code to support the 3 argument version is hereby removed. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Lukas Wunner <lukas@wunner.de> Issue #3799
2015-09-23 15:55:15 +00:00
#ifdef HAVE_1ARG_BIO_END_IO_T
Linux 4.13 compat: bio->bi_status and blk_status_t Commit torvalds/linux@4e4cbee9. The bio->bi_error field was replaced with bio->bi_status which is an enum that describes all possible error types. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6351
2017-07-24 02:37:12 +00:00
#ifdef HAVE_BIO_BI_STATUS
#define BIO_END_IO_ERROR(bio) bi_status_to_errno(bio->bi_status)
#define BIO_END_IO_PROTO(fn, x, z) static void fn(struct bio *x)
#define BIO_END_IO(bio, error) bio_set_bi_status(bio, error)
static inline void
bio_set_bi_status(struct bio *bio, int error)
{
ASSERT3S(error, <=, 0);
bio->bi_status = errno_to_bi_status(-error);
bio_endio(bio);
}
#else
#define BIO_END_IO_ERROR(bio) (-(bio->bi_error))
Linux 4.3 compat: bio_end_io_t / BIO_UPTODATE Commit torvalds/linux@4246a0b63bd8f56a1469b12eafeb875b1041a451 ("block: add a bi_error field to struct bio") dropped the error argument from bio_endio in favor of newly introduced bio->bi_error. This also replaces bio->bi_flags value BIO_UPTODATE. bio_endio was a 3 argument function until Linux 2.6.24, which made it a 2 argument function, and now the prototype has changed yet again to a 1 argument function. Support for pre 2.6.24 kernels was already dropped with 37f9dac592bf ("zvol processing should use struct bio") which assumed the 2 argument version in zvol_request(). Remaining code to support the 3 argument version is hereby removed. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Lukas Wunner <lukas@wunner.de> Issue #3799
2015-09-23 15:55:15 +00:00
#define BIO_END_IO_PROTO(fn, x, z) static void fn(struct bio *x)
Linux 4.13 compat: bio->bi_status and blk_status_t Commit torvalds/linux@4e4cbee9. The bio->bi_error field was replaced with bio->bi_status which is an enum that describes all possible error types. Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6351
2017-07-24 02:37:12 +00:00
#define BIO_END_IO(bio, error) bio_set_bi_error(bio, error)
static inline void
bio_set_bi_error(struct bio *bio, int error)
{
ASSERT3S(error, <=, 0);
bio->bi_error = error;
bio_endio(bio);
}
#endif /* HAVE_BIO_BI_STATUS */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#else
Linux 4.3 compat: bio_end_io_t / BIO_UPTODATE Commit torvalds/linux@4246a0b63bd8f56a1469b12eafeb875b1041a451 ("block: add a bi_error field to struct bio") dropped the error argument from bio_endio in favor of newly introduced bio->bi_error. This also replaces bio->bi_flags value BIO_UPTODATE. bio_endio was a 3 argument function until Linux 2.6.24, which made it a 2 argument function, and now the prototype has changed yet again to a 1 argument function. Support for pre 2.6.24 kernels was already dropped with 37f9dac592bf ("zvol processing should use struct bio") which assumed the 2 argument version in zvol_request(). Remaining code to support the 3 argument version is hereby removed. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Lukas Wunner <lukas@wunner.de> Issue #3799
2015-09-23 15:55:15 +00:00
#define BIO_END_IO_PROTO(fn, x, z) static void fn(struct bio *x, int z)
#define BIO_END_IO(bio, error) bio_endio(bio, error);
#endif /* HAVE_1ARG_BIO_END_IO_T */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
* 2.6.38 - 2.6.x API,
* blkdev_get_by_path()
* blkdev_put()
*
* 2.6.28 - 2.6.37 API,
* open_bdev_exclusive()
* close_bdev_exclusive()
*
* 2.6.12 - 2.6.27 API,
* open_bdev_excl()
* close_bdev_excl()
*
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
* Used to exclusively open a block device from within the kernel.
*/
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
#if defined(HAVE_BLKDEV_GET_BY_PATH)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_open(path, md, hld) blkdev_get_by_path(path, \
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
(md) | FMODE_EXCL, hld)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_close(bdev, md) blkdev_put(bdev, (md) | FMODE_EXCL)
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
#elif defined(HAVE_OPEN_BDEV_EXCLUSIVE)
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_open(path, md, hld) open_bdev_exclusive(path, md, hld)
#define vdev_bdev_close(bdev, md) close_bdev_exclusive(bdev, md)
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_open(path, md, hld) open_bdev_excl(path, md, hld)
#define vdev_bdev_close(bdev, md) close_bdev_excl(bdev)
Linux 2.6.38 compat, blkdev_get_by_path() The open_bdev_exclusive() function has been replaced (again) by the more generic blkdev_get_by_path() function. Additionally, the counterpart function close_bdev_exclusive() has been replaced by blkdev_put(). Because these functions are more generic versions of the functions they replaced the compatibility macro must add the FMODE_EXCL mask to ensure they are exclusive. Closes #114
2011-02-22 22:55:35 +00:00
#endif /* HAVE_BLKDEV_GET_BY_PATH | HAVE_OPEN_BDEV_EXCLUSIVE */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
Add support for autoexpand property While the autoexpand property may seem like a small feature it depends on a significant amount of system infrastructure. Enough of that infrastructure is now in place that with a few modifications for Linux it can be supported. Auto-expand works as follows; when a block device is modified (re-sized, closed after being open r/w, etc) a change uevent is generated for udev. The ZED, which is monitoring udev events, passes the change event along to zfs_deliver_dle() if the disk or partition contains a zfs_member as identified by blkid. From here the device is matched against all imported pool vdevs using the vdev_guid which was read from the label by blkid. If a match is found the ZED reopens the pool vdev. This re-opening is important because it allows the vdev to be briefly closed so the disk partition table can be re-read. Otherwise, it wouldn't be possible to report the maximum possible expansion size. Finally, if the property autoexpand=on a vdev expansion will be attempted. After performing some sanity checks on the disk to verify that it is safe to expand, the primary partition (-part1) will be expanded and the partition table updated. The partition is then re-opened (again) to detect the updated size which allows the new capacity to be used. In order to make all of the above possible the following changes were required: * Updated the zpool_expand_001_pos and zpool_expand_003_pos tests. These tests now create a pool which is layered on a loopback, scsi_debug, and file vdev. This allows for testing of non- partitioned block device (loopback), a partition block device (scsi_debug), and a file which does not receive udev change events. This provided for better test coverage, and by removing the layering on ZFS volumes there issues surrounding layering one pool on another are avoided. * zpool_find_vdev_by_physpath() updated to accept a vdev guid. This allows for matching by guid rather than path which is a more reliable way for the ZED to reference a vdev. * Fixed zfs_zevent_wait() signal handling which could result in the ZED spinning when a signal was not handled. * Removed vdev_disk_rrpart() functionality which can be abandoned in favor of kernel provided blkdev_reread_part() function. * Added a rwlock which is held as a writer while a disk is being reopened. This is important to prevent errors from occurring for any configuration related IOs which bypass the SCL_ZIO lock. The zpool_reopen_007_pos.ksh test case was added to verify IO error are never observed when reopening. This is not expected to impact IO performance. Additional fixes which aren't critical but were discovered and resolved in the course of developing this functionality. * Added PHYS_PATH="/dev/zvol/dataset" to the vdev configuration for ZFS volumes. This is as good as a unique physical path, while the volumes are not used in the test cases anymore for other reasons this improvement was included. Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Signed-off-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #120 Closes #2437 Closes #5771 Closes #7366 Closes #7582 Closes #7629
2018-07-23 22:40:15 +00:00
/*
* 4.1 - x.y.z API,
* 3.10.0 CentOS 7.x API,
* blkdev_reread_part()
*
* For older kernels trigger a re-reading of the partition table by calling
* check_disk_change() which calls flush_disk() to invalidate the device.
*/
#ifdef HAVE_BLKDEV_REREAD_PART
#define vdev_bdev_reread_part(bdev) blkdev_reread_part(bdev)
#else
#define vdev_bdev_reread_part(bdev) check_disk_change(bdev)
#endif /* HAVE_BLKDEV_REREAD_PART */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* 2.6.22 API change
* The function invalidate_bdev() lost it's second argument because
* it was unused.
*/
#ifdef HAVE_1ARG_INVALIDATE_BDEV
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_invalidate(bdev) invalidate_bdev(bdev)
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_invalidate(bdev) invalidate_bdev(bdev, 1)
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#endif /* HAVE_1ARG_INVALIDATE_BDEV */
Linux 2.6.26 compat, lookup_bdev() It's doubtful many people were impacted by this but commit 6c28567 accidentally broke ZFS builds for 2.6.26 and earlier kernels. This commit depends on the lookup_bdev() function which exists in 2.6.26 but wasn't exported until 2.6.27. The availability of the function isn't critical so a wrapper is introduced which returns ERR_PTR(-ENOTSUP) when the function isn't defined. This will have the effect of causing zvol_is_zvol() to always fail for 2.6.26 kernels. This in turn means vdevs will always get opened concurrently which is good for normal usage. This will only become an issue if your using a zvol as a vdev in another pool. In which case you really should be using a newer kernel anyway. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1205
2013-01-28 22:15:39 +00:00
/*
* 2.6.27 API change
Fix lookup_bdev() on Ubuntu Ubuntu added support for checking inode permissions to lookup_bdev() in kernel commit 193fb6a2c94fab8eb8ce70a5da4d21c7d4023bee (merged in 4.4.0-6.21). Upstream bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1636517 This patch adds a test for Ubuntu's variant of lookup_bdev() to configure and calls the function in the correct way. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Hajo Möller <dasjoe@gmail.com> Closes #5336
2016-10-26 17:30:43 +00:00
* The function was exported for use, prior to this it existed but the
Linux 2.6.26 compat, lookup_bdev() It's doubtful many people were impacted by this but commit 6c28567 accidentally broke ZFS builds for 2.6.26 and earlier kernels. This commit depends on the lookup_bdev() function which exists in 2.6.26 but wasn't exported until 2.6.27. The availability of the function isn't critical so a wrapper is introduced which returns ERR_PTR(-ENOTSUP) when the function isn't defined. This will have the effect of causing zvol_is_zvol() to always fail for 2.6.26 kernels. This in turn means vdevs will always get opened concurrently which is good for normal usage. This will only become an issue if your using a zvol as a vdev in another pool. In which case you really should be using a newer kernel anyway. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1205
2013-01-28 22:15:39 +00:00
* symbol was not exported.
Fix lookup_bdev() on Ubuntu Ubuntu added support for checking inode permissions to lookup_bdev() in kernel commit 193fb6a2c94fab8eb8ce70a5da4d21c7d4023bee (merged in 4.4.0-6.21). Upstream bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1636517 This patch adds a test for Ubuntu's variant of lookup_bdev() to configure and calls the function in the correct way. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Hajo Möller <dasjoe@gmail.com> Closes #5336
2016-10-26 17:30:43 +00:00
*
* 4.4.0-6.21 API change for Ubuntu
* lookup_bdev() gained a second argument, FMODE_*, to check inode permissions.
Linux 2.6.26 compat, lookup_bdev() It's doubtful many people were impacted by this but commit 6c28567 accidentally broke ZFS builds for 2.6.26 and earlier kernels. This commit depends on the lookup_bdev() function which exists in 2.6.26 but wasn't exported until 2.6.27. The availability of the function isn't critical so a wrapper is introduced which returns ERR_PTR(-ENOTSUP) when the function isn't defined. This will have the effect of causing zvol_is_zvol() to always fail for 2.6.26 kernels. This in turn means vdevs will always get opened concurrently which is good for normal usage. This will only become an issue if your using a zvol as a vdev in another pool. In which case you really should be using a newer kernel anyway. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1205
2013-01-28 22:15:39 +00:00
*/
Fix lookup_bdev() on Ubuntu Ubuntu added support for checking inode permissions to lookup_bdev() in kernel commit 193fb6a2c94fab8eb8ce70a5da4d21c7d4023bee (merged in 4.4.0-6.21). Upstream bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1636517 This patch adds a test for Ubuntu's variant of lookup_bdev() to configure and calls the function in the correct way. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Hajo Möller <dasjoe@gmail.com> Closes #5336
2016-10-26 17:30:43 +00:00
#ifdef HAVE_1ARG_LOOKUP_BDEV
#define vdev_lookup_bdev(path) lookup_bdev(path)
#else
#ifdef HAVE_2ARGS_LOOKUP_BDEV
#define vdev_lookup_bdev(path) lookup_bdev(path, 0)
#else
#define vdev_lookup_bdev(path) ERR_PTR(-ENOTSUP)
#endif /* HAVE_2ARGS_LOOKUP_BDEV */
#endif /* HAVE_1ARG_LOOKUP_BDEV */
Linux 2.6.26 compat, lookup_bdev() It's doubtful many people were impacted by this but commit 6c28567 accidentally broke ZFS builds for 2.6.26 and earlier kernels. This commit depends on the lookup_bdev() function which exists in 2.6.26 but wasn't exported until 2.6.27. The availability of the function isn't critical so a wrapper is introduced which returns ERR_PTR(-ENOTSUP) when the function isn't defined. This will have the effect of causing zvol_is_zvol() to always fail for 2.6.26 kernels. This in turn means vdevs will always get opened concurrently which is good for normal usage. This will only become an issue if your using a zvol as a vdev in another pool. In which case you really should be using a newer kernel anyway. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1205
2013-01-28 22:15:39 +00:00
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* 2.6.30 API change
Improve AF hard disk detection Use the bdev_physical_block_size() interface to determine the minimize write size which can be issued without incurring a read-modify-write operation. This is used to set the ashift correctly to prevent a performance penalty when using AF hard disks. Unfortunately, this interface isn't entirely reliable because it's not uncommon for disks to misreport this value. For this reason you may still need to manually set your ashift with: zpool create -o ashift=12 ... The solution to this in the upstream Illumos source was to add a white list of known offending drives. Maintaining such a list will be a burden, but it still may be worth doing if we can detect a large number of these drives. This should be considered as future work. Reported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #916
2012-09-02 23:34:12 +00:00
* To ensure good performance preferentially use the physical block size
* for proper alignment. The physical size is supposed to be the internal
* sector size used by the device. This is often 4096 byte for AF devices,
* while a smaller 512 byte logical size is supported for compatibility.
*
* Unfortunately, many drives still misreport their physical sector size.
* For devices which are known to lie you may need to manually set this
* at pool creation time with 'zpool create -o ashift=12 ...'.
*
* When the physical block size interface isn't available, we fall back to
* the logical block size interface and then the older hard sector size.
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
*/
Improve AF hard disk detection Use the bdev_physical_block_size() interface to determine the minimize write size which can be issued without incurring a read-modify-write operation. This is used to set the ashift correctly to prevent a performance penalty when using AF hard disks. Unfortunately, this interface isn't entirely reliable because it's not uncommon for disks to misreport this value. For this reason you may still need to manually set your ashift with: zpool create -o ashift=12 ... The solution to this in the upstream Illumos source was to add a white list of known offending drives. Maintaining such a list will be a burden, but it still may be worth doing if we can detect a large number of these drives. This should be considered as future work. Reported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #916
2012-09-02 23:34:12 +00:00
#ifdef HAVE_BDEV_PHYSICAL_BLOCK_SIZE
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_block_size(bdev) bdev_physical_block_size(bdev)
#else
#ifdef HAVE_BDEV_LOGICAL_BLOCK_SIZE
#define vdev_bdev_block_size(bdev) bdev_logical_block_size(bdev)
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define vdev_bdev_block_size(bdev) bdev_hardsect_size(bdev)
#endif /* HAVE_BDEV_LOGICAL_BLOCK_SIZE */
Improve AF hard disk detection Use the bdev_physical_block_size() interface to determine the minimize write size which can be issued without incurring a read-modify-write operation. This is used to set the ashift correctly to prevent a performance penalty when using AF hard disks. Unfortunately, this interface isn't entirely reliable because it's not uncommon for disks to misreport this value. For this reason you may still need to manually set your ashift with: zpool create -o ashift=12 ... The solution to this in the upstream Illumos source was to add a white list of known offending drives. Maintaining such a list will be a burden, but it still may be worth doing if we can detect a large number of these drives. This should be considered as future work. Reported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #916
2012-09-02 23:34:12 +00:00
#endif /* HAVE_BDEV_PHYSICAL_BLOCK_SIZE */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
4.10 compat - BIO flag changes and others [bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API" autotools checks to use an int to determine whether the various REQ_OP values are defined. This should work properly on kernels >= 4.8. [bio] bio_set_op_attrs() is now an inline function and can't be detected with #ifdef. Add a configure check to determine whether bio_set_op_attrs() is defined. Move the local definition of it from vdev_disk.c to blkdev_compat.h for consistency with other related compability shims. [bio] The read/write flags and their modifiers, including WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA and set the flags appropriately for each supported kernel version. [vfs] The generic_readlink() function has been made static. If .readlink in inode_operations is NULL, generic_readlink() is used. [zol typo] Completely unrelated to 4.10 compat, fix a typo in the check for REQ_OP_SECURE_ERASE so that the proper macro is defined: s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/ Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #5499
2016-12-30 22:03:59 +00:00
#ifndef HAVE_BIO_SET_OP_ATTRS
Linux 2.6.37 compat, WRITE_FLUSH_FUA The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been introduced as a replacement for WRITE_BARRIER. This was done to allow richer semantics to be expressed to the block layer. It is the block layers responsibility to choose the correct way to implement these semantics. This change simply updates the bio's to use the new kernel API which should be absolutely safe. However, since ZFS depends entirely on this working as designed for correctness we do want to be careful. Closes #281
2011-06-16 18:20:22 +00:00
/*
4.10 compat - BIO flag changes and others [bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API" autotools checks to use an int to determine whether the various REQ_OP values are defined. This should work properly on kernels >= 4.8. [bio] bio_set_op_attrs() is now an inline function and can't be detected with #ifdef. Add a configure check to determine whether bio_set_op_attrs() is defined. Move the local definition of it from vdev_disk.c to blkdev_compat.h for consistency with other related compability shims. [bio] The read/write flags and their modifiers, including WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA and set the flags appropriately for each supported kernel version. [vfs] The generic_readlink() function has been made static. If .readlink in inode_operations is NULL, generic_readlink() is used. [zol typo] Completely unrelated to 4.10 compat, fix a typo in the check for REQ_OP_SECURE_ERASE so that the proper macro is defined: s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/ Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #5499
2016-12-30 22:03:59 +00:00
* Kernels without bio_set_op_attrs use bi_rw for the bio flags.
Linux 2.6.37 compat, WRITE_FLUSH_FUA The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been introduced as a replacement for WRITE_BARRIER. This was done to allow richer semantics to be expressed to the block layer. It is the block layers responsibility to choose the correct way to implement these semantics. This change simply updates the bio's to use the new kernel API which should be absolutely safe. However, since ZFS depends entirely on this working as designed for correctness we do want to be careful. Closes #281
2011-06-16 18:20:22 +00:00
*/
4.10 compat - BIO flag changes and others [bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API" autotools checks to use an int to determine whether the various REQ_OP values are defined. This should work properly on kernels >= 4.8. [bio] bio_set_op_attrs() is now an inline function and can't be detected with #ifdef. Add a configure check to determine whether bio_set_op_attrs() is defined. Move the local definition of it from vdev_disk.c to blkdev_compat.h for consistency with other related compability shims. [bio] The read/write flags and their modifiers, including WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA and set the flags appropriately for each supported kernel version. [vfs] The generic_readlink() function has been made static. If .readlink in inode_operations is NULL, generic_readlink() is used. [zol typo] Completely unrelated to 4.10 compat, fix a typo in the check for REQ_OP_SECURE_ERASE so that the proper macro is defined: s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/ Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #5499
2016-12-30 22:03:59 +00:00
static inline void
bio_set_op_attrs(struct bio *bio, unsigned rw, unsigned flags)
{
bio->bi_rw |= rw | flags;
}
#endif
/*
* bio_set_flush - Set the appropriate flags in a bio to guarantee
* data are on non-volatile media on completion.
*
* 2.6.X - 2.6.36 API,
* WRITE_BARRIER - Tells the block layer to commit all previously submitted
* writes to stable storage before this one is started and that the current
* write is on stable storage upon completion. Also prevents reordering
* on both sides of the current operation.
*
* 2.6.37 - 4.8 API,
* Introduce WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags as a
* replacement for WRITE_BARRIER to allow expressing richer semantics
* to the block layer. It's up to the block layer to implement the
* semantics correctly. Use the WRITE_FLUSH_FUA flag combination.
*
* 4.8 - 4.9 API,
* REQ_FLUSH was renamed to REQ_PREFLUSH. For consistency with previous
* ZoL releases, prefer the WRITE_FLUSH_FUA flag set if it's available.
*
* 4.10 API,
* The read/write flags and their modifiers, including WRITE_FLUSH,
* WRITE_FUA and WRITE_FLUSH_FUA were removed from fs.h in
* torvalds/linux@70fd7614 and replaced by direct flag modification
* of the REQ_ flags in bio->bi_opf. Use REQ_PREFLUSH.
*/
static inline void
bio_set_flush(struct bio *bio)
{
Fix harmless "BARRIER is deprecated" kernel warning on Centos 6.8 A one time warning after module load that "BARRIER is deprecated" was seen on the heavily patched 2.6.32-642.13.1.el6.x86_64 Centos 6.8 kernel. It seems that kernel had both the old BARRIER and the newer FLUSH/FUA interfaces defined. This fixes the warning by prefering the newer FLUSH/FUA interface if it's available. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #5739 Closes #5828
2017-03-08 17:20:21 +00:00
#if defined(REQ_PREFLUSH) /* >= 4.10 */
bio_set_op_attrs(bio, 0, REQ_PREFLUSH);
4.10 compat - BIO flag changes and others [bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API" autotools checks to use an int to determine whether the various REQ_OP values are defined. This should work properly on kernels >= 4.8. [bio] bio_set_op_attrs() is now an inline function and can't be detected with #ifdef. Add a configure check to determine whether bio_set_op_attrs() is defined. Move the local definition of it from vdev_disk.c to blkdev_compat.h for consistency with other related compability shims. [bio] The read/write flags and their modifiers, including WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA and set the flags appropriately for each supported kernel version. [vfs] The generic_readlink() function has been made static. If .readlink in inode_operations is NULL, generic_readlink() is used. [zol typo] Completely unrelated to 4.10 compat, fix a typo in the check for REQ_OP_SECURE_ERASE so that the proper macro is defined: s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/ Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #5499
2016-12-30 22:03:59 +00:00
#elif defined(WRITE_FLUSH_FUA) /* >= 2.6.37 and <= 4.9 */
bio_set_op_attrs(bio, 0, WRITE_FLUSH_FUA);
Fix harmless "BARRIER is deprecated" kernel warning on Centos 6.8 A one time warning after module load that "BARRIER is deprecated" was seen on the heavily patched 2.6.32-642.13.1.el6.x86_64 Centos 6.8 kernel. It seems that kernel had both the old BARRIER and the newer FLUSH/FUA interfaces defined. This fixes the warning by prefering the newer FLUSH/FUA interface if it's available. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #5739 Closes #5828
2017-03-08 17:20:21 +00:00
#elif defined(WRITE_BARRIER) /* < 2.6.37 */
bio_set_op_attrs(bio, 0, WRITE_BARRIER);
Linux 4.8 compat: REQ_PREFLUSH The REQ_FLUSH flag was renamed REQ_PREFLUSH to avoid confusion with REQ_OP_FLUSH. See https://github.com/torvalds/linux/commit/28a8f0d3 for complete details. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4892 Issue #4899
2016-07-27 18:06:17 +00:00
#else
4.10 compat - BIO flag changes and others [bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API" autotools checks to use an int to determine whether the various REQ_OP values are defined. This should work properly on kernels >= 4.8. [bio] bio_set_op_attrs() is now an inline function and can't be detected with #ifdef. Add a configure check to determine whether bio_set_op_attrs() is defined. Move the local definition of it from vdev_disk.c to blkdev_compat.h for consistency with other related compability shims. [bio] The read/write flags and their modifiers, including WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA and set the flags appropriately for each supported kernel version. [vfs] The generic_readlink() function has been made static. If .readlink in inode_operations is NULL, generic_readlink() is used. [zol typo] Completely unrelated to 4.10 compat, fix a typo in the check for REQ_OP_SECURE_ERASE so that the proper macro is defined: s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/ Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #5499
2016-12-30 22:03:59 +00:00
#error "Allowing the build will cause bio_set_flush requests to be ignored."
Linux 4.8 compat: REQ_PREFLUSH The REQ_FLUSH flag was renamed REQ_PREFLUSH to avoid confusion with REQ_OP_FLUSH. See https://github.com/torvalds/linux/commit/28a8f0d3 for complete details. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4892 Issue #4899
2016-07-27 18:06:17 +00:00
#endif
4.10 compat - BIO flag changes and others [bio] The req_op enum was changed to req_opf. Update the "Linux 4.8 API" autotools checks to use an int to determine whether the various REQ_OP values are defined. This should work properly on kernels >= 4.8. [bio] bio_set_op_attrs() is now an inline function and can't be detected with #ifdef. Add a configure check to determine whether bio_set_op_attrs() is defined. Move the local definition of it from vdev_disk.c to blkdev_compat.h for consistency with other related compability shims. [bio] The read/write flags and their modifiers, including WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA have been removed from fs.h. Add the new bio_set_flush() compatibility wrapper to replace VDEV_WRITE_FLUSH_FUA and set the flags appropriately for each supported kernel version. [vfs] The generic_readlink() function has been made static. If .readlink in inode_operations is NULL, generic_readlink() is used. [zol typo] Completely unrelated to 4.10 compat, fix a typo in the check for REQ_OP_SECURE_ERASE so that the proper macro is defined: s/HAVE_REQ_OP_SECURE_DISCARD/HAVE_REQ_OP_SECURE_ERASE/ Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Tim Chase <tim@chase2k.com> Closes #5499
2016-12-30 22:03:59 +00:00
}
Linux 4.8 compat: REQ_PREFLUSH The REQ_FLUSH flag was renamed REQ_PREFLUSH to avoid confusion with REQ_OP_FLUSH. See https://github.com/torvalds/linux/commit/28a8f0d3 for complete details. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4892 Issue #4899
2016-07-27 18:06:17 +00:00
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
/*
* 4.8 - 4.x API,
* REQ_OP_FLUSH
*
* 4.8-rc0 - 4.8-rc1,
* REQ_PREFLUSH
*
* 2.6.36 - 4.7 API,
* REQ_FLUSH
*
* 2.6.x - 2.6.35 API,
* HAVE_BIO_RW_BARRIER
*
* Used to determine if a cache flush has been requested. This check has
* been left intentionally broad in order to cover both a legacy flush
* and the new preflush behavior introduced in Linux 4.8. This is correct
* in all cases but may have a performance impact for some kernels. It
* has the advantage of minimizing kernel specific changes in the zvol code.
Reorder HAVE_BIO_RW_* checks The HAVE_BIO_RW_* #ifdef's must appear before REQ_* #ifdef's in the bio_is_flush() and bio_is_discard() macros. Linux 2.6.32 era kernels defined both of values and the HAVE_BIO_RW_* must be used in this case. This resulted in a panic in zconfig test 5. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951 Closes #4959
2016-08-11 21:58:13 +00:00
*
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
*/
static inline boolean_t
bio_is_flush(struct bio *bio)
{
#if defined(HAVE_REQ_OP_FLUSH) && defined(HAVE_BIO_BI_OPF)
return ((bio_op(bio) == REQ_OP_FLUSH) || (bio->bi_opf & REQ_PREFLUSH));
#elif defined(REQ_PREFLUSH) && defined(HAVE_BIO_BI_OPF)
return (bio->bi_opf & REQ_PREFLUSH);
#elif defined(REQ_PREFLUSH) && !defined(HAVE_BIO_BI_OPF)
return (bio->bi_rw & REQ_PREFLUSH);
Reorder HAVE_BIO_RW_* checks The HAVE_BIO_RW_* #ifdef's must appear before REQ_* #ifdef's in the bio_is_flush() and bio_is_discard() macros. Linux 2.6.32 era kernels defined both of values and the HAVE_BIO_RW_* must be used in this case. This resulted in a panic in zconfig test 5. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951 Closes #4959
2016-08-11 21:58:13 +00:00
#elif defined(REQ_FLUSH)
return (bio->bi_rw & REQ_FLUSH);
Fix harmless "BARRIER is deprecated" kernel warning on Centos 6.8 A one time warning after module load that "BARRIER is deprecated" was seen on the heavily patched 2.6.32-642.13.1.el6.x86_64 Centos 6.8 kernel. It seems that kernel had both the old BARRIER and the newer FLUSH/FUA interfaces defined. This fixes the warning by prefering the newer FLUSH/FUA interface if it's available. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #5739 Closes #5828
2017-03-08 17:20:21 +00:00
#elif defined(HAVE_BIO_RW_BARRIER)
return (bio->bi_rw & (1 << BIO_RW_BARRIER));
Linux 2.6.37 compat, WRITE_FLUSH_FUA The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been introduced as a replacement for WRITE_BARRIER. This was done to allow richer semantics to be expressed to the block layer. It is the block layers responsibility to choose the correct way to implement these semantics. This change simply updates the bio's to use the new kernel API which should be absolutely safe. However, since ZFS depends entirely on this working as designed for correctness we do want to be careful. Closes #281
2011-06-16 18:20:22 +00:00
#else
Fix multi-line error messages in blkdev_compat.h Fix multi-line error messages in blkdev_compat.h by changing error-generating multi-line error messages to single line errors. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: bunder2015 <omfgbunder@gmail.com> Closes #5860
2017-03-07 17:54:55 +00:00
#error "Allowing the build will cause flush requests to be ignored."
Linux 2.6.37 compat, WRITE_FLUSH_FUA The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been introduced as a replacement for WRITE_BARRIER. This was done to allow richer semantics to be expressed to the block layer. It is the block layers responsibility to choose the correct way to implement these semantics. This change simply updates the bio's to use the new kernel API which should be absolutely safe. However, since ZFS depends entirely on this working as designed for correctness we do want to be careful. Closes #281
2011-06-16 18:20:22 +00:00
#endif
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
}
Linux 4.8 compat: REQ_PREFLUSH The REQ_FLUSH flag was renamed REQ_PREFLUSH to avoid confusion with REQ_OP_FLUSH. See https://github.com/torvalds/linux/commit/28a8f0d3 for complete details. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4892 Issue #4899
2016-07-27 18:06:17 +00:00
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
/*
* 4.8 - 4.x API,
* REQ_FUA flag moved to bio->bi_opf
*
* 2.6.x - 4.7 API,
* REQ_FUA
*/
static inline boolean_t
bio_is_fua(struct bio *bio)
{
#if defined(HAVE_BIO_BI_OPF)
return (bio->bi_opf & REQ_FUA);
#elif defined(REQ_FUA)
return (bio->bi_rw & REQ_FUA);
#else
Fix multi-line error messages in blkdev_compat.h Fix multi-line error messages in blkdev_compat.h by changing error-generating multi-line error messages to single line errors. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: bunder2015 <omfgbunder@gmail.com> Closes #5860
2017-03-07 17:54:55 +00:00
#error "Allowing the build will cause fua requests to be ignored."
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#endif
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
}
Linux 2.6.37 compat, WRITE_FLUSH_FUA The WRITE_FLUSH, WRITE_FUA, and WRITE_FLUSH_FUA flags have been introduced as a replacement for WRITE_BARRIER. This was done to allow richer semantics to be expressed to the block layer. It is the block layers responsibility to choose the correct way to implement these semantics. This change simply updates the bio's to use the new kernel API which should be absolutely safe. However, since ZFS depends entirely on this working as designed for correctness we do want to be careful. Closes #281
2011-06-16 18:20:22 +00:00
Add support for DISCARD to ZVOLs. DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-02 13:23:12 +00:00
/*
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
* 4.8 - 4.x API,
* REQ_OP_DISCARD
Linux 4.8 compat: REQ_OP and bio_set_op_attrs() New REQ_OP_* definitions have been introduced to separate the WRITE, READ, and DISCARD operations from the flags. This included changing the encoding of bi_rw. It places REQ_OP_* in high order bits and other stuff in low order bits. This encoding is done through the new helper function bio_set_op_attrs. For complete details refer to: https://github.com/torvalds/linux/commit/f215082 https://github.com/torvalds/linux/commit/4e1b2d5 Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4892 Closes #4899
2016-07-27 17:55:32 +00:00
*
* 2.6.36 - 4.7 API,
* REQ_DISCARD
*
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
* 2.6.28 - 2.6.35 API,
* BIO_RW_DISCARD
Linux 4.8 compat: REQ_OP and bio_set_op_attrs() New REQ_OP_* definitions have been introduced to separate the WRITE, READ, and DISCARD operations from the flags. This included changing the encoding of bi_rw. It places REQ_OP_* in high order bits and other stuff in low order bits. This encoding is done through the new helper function bio_set_op_attrs. For complete details refer to: https://github.com/torvalds/linux/commit/f215082 https://github.com/torvalds/linux/commit/4e1b2d5 Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4892 Closes #4899
2016-07-27 17:55:32 +00:00
*
* In all cases the normal I/O path is used for discards. The only
* difference is how the kernel tags individual I/Os as discards.
Reorder HAVE_BIO_RW_* checks The HAVE_BIO_RW_* #ifdef's must appear before REQ_* #ifdef's in the bio_is_flush() and bio_is_discard() macros. Linux 2.6.32 era kernels defined both of values and the HAVE_BIO_RW_* must be used in this case. This resulted in a panic in zconfig test 5. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951 Closes #4959
2016-08-11 21:58:13 +00:00
*
* Note that 2.6.32 era kernels provide both BIO_RW_DISCARD and REQ_DISCARD,
* where BIO_RW_DISCARD is the correct interface. Therefore, it is important
* that the HAVE_BIO_RW_DISCARD check occur before the REQ_DISCARD check.
Add support for DISCARD to ZVOLs. DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-02 13:23:12 +00:00
*/
Linux 4.8 compat: REQ_OP and bio_set_op_attrs() New REQ_OP_* definitions have been introduced to separate the WRITE, READ, and DISCARD operations from the flags. This included changing the encoding of bi_rw. It places REQ_OP_* in high order bits and other stuff in low order bits. This encoding is done through the new helper function bio_set_op_attrs. For complete details refer to: https://github.com/torvalds/linux/commit/f215082 https://github.com/torvalds/linux/commit/4e1b2d5 Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4892 Closes #4899
2016-07-27 17:55:32 +00:00
static inline boolean_t
bio_is_discard(struct bio *bio)
{
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
#if defined(HAVE_REQ_OP_DISCARD)
return (bio_op(bio) == REQ_OP_DISCARD);
#elif defined(HAVE_BIO_RW_DISCARD)
return (bio->bi_rw & (1 << BIO_RW_DISCARD));
Reorder HAVE_BIO_RW_* checks The HAVE_BIO_RW_* #ifdef's must appear before REQ_* #ifdef's in the bio_is_flush() and bio_is_discard() macros. Linux 2.6.32 era kernels defined both of values and the HAVE_BIO_RW_* must be used in this case. This resulted in a panic in zconfig test 5. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951 Closes #4959
2016-08-11 21:58:13 +00:00
#elif defined(REQ_DISCARD)
return (bio->bi_rw & REQ_DISCARD);
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#else
Fix multi-line error messages in blkdev_compat.h Fix multi-line error messages in blkdev_compat.h by changing error-generating multi-line error messages to single line errors. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: bunder2015 <omfgbunder@gmail.com> Closes #5860
2017-03-07 17:54:55 +00:00
/* potentially triggering the DMU_MAX_ACCESS assertion. */
#error "Allowing the build will cause discard requests to become writes."
Add support for DISCARD to ZVOLs. DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-02 13:23:12 +00:00
#endif
Linux 4.8 compat: REQ_OP and bio_set_op_attrs() New REQ_OP_* definitions have been introduced to separate the WRITE, READ, and DISCARD operations from the flags. This included changing the encoding of bi_rw. It places REQ_OP_* in high order bits and other stuff in low order bits. This encoding is done through the new helper function bio_set_op_attrs. For complete details refer to: https://github.com/torvalds/linux/commit/f215082 https://github.com/torvalds/linux/commit/4e1b2d5 Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4892 Closes #4899
2016-07-27 17:55:32 +00:00
}
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
/*
* 4.8 - 4.x API,
* REQ_OP_SECURE_ERASE
*
* 2.6.36 - 4.7 API,
* REQ_SECURE
*
* 2.6.x - 2.6.35 API,
* Unsupported by kernel
*/
static inline boolean_t
bio_is_secure_erase(struct bio *bio)
{
#if defined(HAVE_REQ_OP_SECURE_ERASE)
return (bio_op(bio) == REQ_OP_SECURE_ERASE);
#elif defined(REQ_SECURE)
return (bio->bi_rw & REQ_SECURE);
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#else
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
return (0);
zvol processing should use struct bio Internally, zvols are files exposed through the block device API. This is intended to reduce overhead when things require block devices. However, the ZoL zvol code emulates a traditional block device in that it has a top half and a bottom half. This is an unnecessary source of overhead that does not exist on any other OpenZFS platform does this. This patch removes it. Early users of this patch reported double digit performance gains in IOPS on zvols in the range of 50% to 80%. Comments in the code suggest that the current implementation was done to obtain IO merging from Linux's IO elevator. However, the DMU already does write merging while arc_read() should implicitly merge read IOs because only 1 thread is permitted to fetch the buffer into ARC. In addition, commercial ZFSOnLinux distributions report that regular files are more performant than zvols under the current implementation, and the main consumers of zvols are VMs and iSCSI targets, which have their own elevators to merge IOs. Some minor refactoring allows us to register zfs_request() as our ->make_request() handler in place of the generic_make_request() function. This eliminates the layer of code that broke IO requests on zvols into a top half and a bottom half. This has several benefits: 1. No per zvol spinlocks. 2. No redundant IO elevator processing. 3. Interrupts are disabled only when actually necessary. 4. No redispatching of IOs when all taskq threads are busy. 5. Linux's page out routines will properly block. 6. Many autotools checks become obsolete. An unfortunate consequence of eliminating the layer that generic_make_request() is that we no longer calls the instrumentation hooks for block IO accounting. Those hooks are GPL-exported, so we cannot call them ourselves and consequently, we lose the ability to do IO monitoring via iostat. Since zvols are internally files mapped as block devices, this should be okay. Anyone who is willing to accept the performance penalty for the block IO layer's accounting could use the loop device in between the zvol and its consumer. Alternatively, perf and ftrace likely could be used. Also, tools like latencytop will still work. Tools such as latencytop sometimes provide a better view of performance bottlenecks than the traditional block IO accounting tools do. Lastly, if direct reclaim occurs during spacemap loading and swap is on a zvol, this code will deadlock. That deadlock could already occur with sync=always on zvols. Given that swap on zvols is not yet production ready, this is not a blocker. Signed-off-by: Richard Yao <ryao@gentoo.org>
2014-07-04 22:43:47 +00:00
#endif
Linux 4.8 compat: Fix removal of bio->bi_rw member All users of bio->bi_rw have been replaced with compatibility wrappers. This allows the kernel specific logic to be abstracted away, and for each of the supported cases to be documented with the wrapper. The updated interfaces are as follows: * void blk_queue_set_write_cache(struct request_queue *, bool, bool) * boolean_t bio_is_flush(struct bio *) * boolean_t bio_is_fua(struct bio *) * boolean_t bio_is_discard(struct bio *) * boolean_t bio_is_secure_erase(struct bio *) * VDEV_WRITE_FLUSH_FUA Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #4951
2016-08-09 18:22:30 +00:00
}
Add support for DISCARD to ZVOLs. DISCARD (REQ_DISCARD, BLKDISCARD) is useful for thin provisioning. It allows ZVOL clients to discard (unmap, trim) block ranges from a ZVOL, thus optimizing disk space usage by allowing a ZVOL to shrink instead of just grow. We can't use zfs_space() or zfs_freesp() here, since these functions only work on regular files, not volumes. Fortunately we can use the low-level function dmu_free_long_range() which does exactly what we want. Currently the discard operation is not added to the log. That's not a big deal since losing discard requests cannot result in data corruption. It would however result in disk space usage higher than it should be. Thus adding log support to zvol_discard() is probably a good idea for a future improvement. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-09-02 13:23:12 +00:00
Set zvol discard_granularity to the volblocksize. Currently, zvols have a discard granularity set to 0, which suggests to the upper layer that discard requests of arbirarily small size and alignment can be made efficiently. In practice however, ZFS does not handle unaligned discard requests efficiently: indeed, it is unable to free a part of a block. It will write zeros to the specified range instead, which is both useless and inefficient (see dnode_free_range). With this patch, zvol block devices expose volblocksize as their discard granularity, so the upper layer is aware that it's not supposed to send discard requests smaller than volblocksize. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #862
2012-08-01 08:29:59 +00:00
/*
* 2.6.33 API change
* Discard granularity and alignment restrictions may now be set. For
* older kernels which do not support this it is safe to skip it.
*/
#ifdef HAVE_DISCARD_GRANULARITY
static inline void
blk_queue_discard_granularity(struct request_queue *q, unsigned int dg)
{
q->limits.discard_granularity = dg;
}
#else
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define blk_queue_discard_granularity(x, dg) ((void)0)
Set zvol discard_granularity to the volblocksize. Currently, zvols have a discard granularity set to 0, which suggests to the upper layer that discard requests of arbirarily small size and alignment can be made efficiently. In practice however, ZFS does not handle unaligned discard requests efficiently: indeed, it is unable to free a part of a block. It will write zeros to the specified range instead, which is both useless and inefficient (see dnode_free_range). With this patch, zvol block devices expose volblocksize as their discard granularity, so the upper layer is aware that it's not supposed to send discard requests smaller than volblocksize. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #862
2012-08-01 08:29:59 +00:00
#endif /* HAVE_DISCARD_GRANULARITY */
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
/*
* Default Linux IO Scheduler,
* Setting the scheduler to noop will allow the Linux IO scheduler to
* still perform front and back merging, while leaving the request
* ordering and prioritization to the ZFS IO scheduler.
*/
#define VDEV_SCHEDULER "noop"
Add linux kernel disk support Native Linux vdev disk interfaces Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2010-08-26 18:45:02 +00:00
Fix hot spares The issue with hot spares in ZoL is because it opens all leaf vdevs exclusively (O_EXCL). On Linux, exclusive opens cause subsequent exclusive opens to fail with EBUSY. This could be resolved by not opening any of the devices exclusively, which is what Illumos does, but the additional protection offered by exclusive opens is desirable. It cleanly prevents you from accidentally adding an in-use non-ZFS device to your pool. To fix this we very slightly relaxed the usage of O_EXCL in the following ways. 1) Functions which open the device but only read had the O_EXCL flag removed and were updated to use O_RDONLY. 2) A common holder was added to the vdev disk code. This allow the ZFS code to internally open the device multiple times but non-ZFS callers may not. 3) An exception was added to make_disks() for hot spare when creating partition tables. For hot spare devices which are already opened exclusively we skip creating the partition table because this must already have been done when the disk was originally added as a hot spare. Additional minor changes include fixing check_in_use() to use a partition instead of a slice suffix. And is_spare() was moved above make_disks() to avoid adding a forward reference. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #250
2013-02-27 01:02:27 +00:00
/*
* A common holder for vdev_bdev_open() is used to relax the exclusive open
* semantics slightly. Internal vdev disk callers may pass VDEV_HOLDER to
* allow them to open the device multiple times. Other kernel callers and
* user space processes which don't pass this value will get EBUSY. This is
* currently required for the correct operation of hot spares.
*/
cstyle: Resolve C style issues The vast majority of these changes are in Linux specific code. They are the result of not having an automated style checker to validate the code when it was originally written. Others were caused when the common code was slightly adjusted for Linux. This patch contains no functional changes. It only refreshes the code to conform to style guide. Everyone submitting patches for inclusion upstream should now run 'make checkstyle' and resolve any warning prior to opening a pull request. The automated builders have been updated to fail a build if when 'make checkstyle' detects an issue. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1821
2013-11-01 19:26:11 +00:00
#define VDEV_HOLDER ((void *)0x2401de7)
Fix hot spares The issue with hot spares in ZoL is because it opens all leaf vdevs exclusively (O_EXCL). On Linux, exclusive opens cause subsequent exclusive opens to fail with EBUSY. This could be resolved by not opening any of the devices exclusively, which is what Illumos does, but the additional protection offered by exclusive opens is desirable. It cleanly prevents you from accidentally adding an in-use non-ZFS device to your pool. To fix this we very slightly relaxed the usage of O_EXCL in the following ways. 1) Functions which open the device but only read had the O_EXCL flag removed and were updated to use O_RDONLY. 2) A common holder was added to the vdev disk code. This allow the ZFS code to internally open the device multiple times but non-ZFS callers may not. 3) An exception was added to make_disks() for hot spare when creating partition tables. For hot spare devices which are already opened exclusively we skip creating the partition table because this must already have been done when the disk was originally added as a hot spare. Additional minor changes include fixing check_in_use() to use a partition instead of a slice suffix. And is_spare() was moved above make_disks() to avoid adding a forward reference. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #250
2013-02-27 01:02:27 +00:00
Reinstate zvol_taskq to fix aio on zvol Commit 37f9dac removed the zvol_taskq for processing zvol requests. This was removed as part of switching to make_request_fn and was motivated by a concern at the time over dispatch latency. However, this also made all bio request synchronous, and caused serious performance issues as the bio submitter would wait for every bio it submitted, effectively making the IO depth 1. This patch reinstate zvol_taskq, and to make sure overlapped I/Os are ordered properly, we take range lock in zvol_request, and pass it along with bio to the I/O functions zvol_{write,discard,read}. In order to facilitate benchmarks a zvol_request_sync module option was added to switch between sync and async request handling. For the moment, the default behavior is synchronous but this is likely to change pending additional testing. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #5824
2017-02-23 00:08:04 +00:00
static inline void
Linux 3.14 compat: IO acct, global_page_state, etc generic_start_io_acct/generic_end_io_acct in the master branch of the linux kernel requires that the request_queue be provided. Move the logic from freemem in the spl to arc_free_memory in arc.c. Do this so we can take advantage of global_page_state interface checks in zfs. Upstream kernel replaced struct block_device with struct gendisk in struct bio. Determine if the function bio_set_dev exists during configure and have zfs use that if it exists. bio_set_dev https://github.com/torvalds/linux/commit/74d4699 global_node_page_state https://github.com/torvalds/linux/commit/75ef718 io acct https://github.com/torvalds/linux/commit/d62e26b Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6635
2017-09-16 18:00:19 +00:00
blk_generic_start_io_acct(struct request_queue *q, int rw,
unsigned long sectors, struct hd_struct *part)
Reinstate zvol_taskq to fix aio on zvol Commit 37f9dac removed the zvol_taskq for processing zvol requests. This was removed as part of switching to make_request_fn and was motivated by a concern at the time over dispatch latency. However, this also made all bio request synchronous, and caused serious performance issues as the bio submitter would wait for every bio it submitted, effectively making the IO depth 1. This patch reinstate zvol_taskq, and to make sure overlapped I/Os are ordered properly, we take range lock in zvol_request, and pass it along with bio to the I/O functions zvol_{write,discard,read}. In order to facilitate benchmarks a zvol_request_sync module option was added to switch between sync and async request handling. For the moment, the default behavior is synchronous but this is likely to change pending additional testing. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #5824
2017-02-23 00:08:04 +00:00
{
Linux 3.14 compat: IO acct, global_page_state, etc generic_start_io_acct/generic_end_io_acct in the master branch of the linux kernel requires that the request_queue be provided. Move the logic from freemem in the spl to arc_free_memory in arc.c. Do this so we can take advantage of global_page_state interface checks in zfs. Upstream kernel replaced struct block_device with struct gendisk in struct bio. Determine if the function bio_set_dev exists during configure and have zfs use that if it exists. bio_set_dev https://github.com/torvalds/linux/commit/74d4699 global_node_page_state https://github.com/torvalds/linux/commit/75ef718 io acct https://github.com/torvalds/linux/commit/d62e26b Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6635
2017-09-16 18:00:19 +00:00
#if defined(HAVE_GENERIC_IO_ACCT_3ARG)
generic_start_io_acct(rw, sectors, part);
#elif defined(HAVE_GENERIC_IO_ACCT_4ARG)
generic_start_io_acct(q, rw, sectors, part);
#endif
Reinstate zvol_taskq to fix aio on zvol Commit 37f9dac removed the zvol_taskq for processing zvol requests. This was removed as part of switching to make_request_fn and was motivated by a concern at the time over dispatch latency. However, this also made all bio request synchronous, and caused serious performance issues as the bio submitter would wait for every bio it submitted, effectively making the IO depth 1. This patch reinstate zvol_taskq, and to make sure overlapped I/Os are ordered properly, we take range lock in zvol_request, and pass it along with bio to the I/O functions zvol_{write,discard,read}. In order to facilitate benchmarks a zvol_request_sync module option was added to switch between sync and async request handling. For the moment, the default behavior is synchronous but this is likely to change pending additional testing. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #5824
2017-02-23 00:08:04 +00:00
}
static inline void
Linux 3.14 compat: IO acct, global_page_state, etc generic_start_io_acct/generic_end_io_acct in the master branch of the linux kernel requires that the request_queue be provided. Move the logic from freemem in the spl to arc_free_memory in arc.c. Do this so we can take advantage of global_page_state interface checks in zfs. Upstream kernel replaced struct block_device with struct gendisk in struct bio. Determine if the function bio_set_dev exists during configure and have zfs use that if it exists. bio_set_dev https://github.com/torvalds/linux/commit/74d4699 global_node_page_state https://github.com/torvalds/linux/commit/75ef718 io acct https://github.com/torvalds/linux/commit/d62e26b Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6635
2017-09-16 18:00:19 +00:00
blk_generic_end_io_acct(struct request_queue *q, int rw,
struct hd_struct *part, unsigned long start_time)
Reinstate zvol_taskq to fix aio on zvol Commit 37f9dac removed the zvol_taskq for processing zvol requests. This was removed as part of switching to make_request_fn and was motivated by a concern at the time over dispatch latency. However, this also made all bio request synchronous, and caused serious performance issues as the bio submitter would wait for every bio it submitted, effectively making the IO depth 1. This patch reinstate zvol_taskq, and to make sure overlapped I/Os are ordered properly, we take range lock in zvol_request, and pass it along with bio to the I/O functions zvol_{write,discard,read}. In order to facilitate benchmarks a zvol_request_sync module option was added to switch between sync and async request handling. For the moment, the default behavior is synchronous but this is likely to change pending additional testing. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Closes #5824
2017-02-23 00:08:04 +00:00
{
Linux 3.14 compat: IO acct, global_page_state, etc generic_start_io_acct/generic_end_io_acct in the master branch of the linux kernel requires that the request_queue be provided. Move the logic from freemem in the spl to arc_free_memory in arc.c. Do this so we can take advantage of global_page_state interface checks in zfs. Upstream kernel replaced struct block_device with struct gendisk in struct bio. Determine if the function bio_set_dev exists during configure and have zfs use that if it exists. bio_set_dev https://github.com/torvalds/linux/commit/74d4699 global_node_page_state https://github.com/torvalds/linux/commit/75ef718 io acct https://github.com/torvalds/linux/commit/d62e26b Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6635
2017-09-16 18:00:19 +00:00
#if defined(HAVE_GENERIC_IO_ACCT_3ARG)
generic_end_io_acct(rw, part, start_time);
#elif defined(HAVE_GENERIC_IO_ACCT_4ARG)
generic_end_io_acct(q, rw, part, start_time);
Reintroduce IO accounting on zvols on Linux 3.19+ zfsonlinux/zfs@e20cd6f7a8922709b1aa2ecefd783390102d79e0 caused us to lose IO accounting on zvols. When I originally wrote that last year, the symbols we needed to maintain IO accounting were GPL exported, but torvalds/linux@394ffa503bc40e32d7f54a9b817264e81ce131b4 provided suitable symbols for restoring this functionality 4 months later. We can call them to restore the IO accounting on Linux 3.19 and later as well as any older kernels where that patch is backported. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3741
2015-09-07 16:03:19 +00:00
#endif
Linux 3.14 compat: IO acct, global_page_state, etc generic_start_io_acct/generic_end_io_acct in the master branch of the linux kernel requires that the request_queue be provided. Move the logic from freemem in the spl to arc_free_memory in arc.c. Do this so we can take advantage of global_page_state interface checks in zfs. Upstream kernel replaced struct block_device with struct gendisk in struct bio. Determine if the function bio_set_dev exists during configure and have zfs use that if it exists. bio_set_dev https://github.com/torvalds/linux/commit/74d4699 global_node_page_state https://github.com/torvalds/linux/commit/75ef718 io acct https://github.com/torvalds/linux/commit/d62e26b Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6635
2017-09-16 18:00:19 +00:00
}
Reintroduce IO accounting on zvols on Linux 3.19+ zfsonlinux/zfs@e20cd6f7a8922709b1aa2ecefd783390102d79e0 caused us to lose IO accounting on zvols. When I originally wrote that last year, the symbols we needed to maintain IO accounting were GPL exported, but torvalds/linux@394ffa503bc40e32d7f54a9b817264e81ce131b4 provided suitable symbols for restoring this functionality 4 months later. We can call them to restore the IO accounting on Linux 3.19 and later as well as any older kernels where that patch is backported. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3741
2015-09-07 16:03:19 +00:00
Linux 2.6.x compat, blkdev_compat.h For legacy reasons the zvol.c and vdev_disk.c Linux compatibility code ended up in sys/blkdev.h and sys/vdev_disk.h headers. While there are worse places for this code to live it should be in a linux/blkdev_compat.h header. This change moves this block device Linux compatibility code in to the linux/blkdev_compat.h header and updates all the correct #include locations. This is not a functional change or bug fix, it is just code cleanup.
2011-02-22 20:15:13 +00:00
#endif /* _ZFS_BLKDEV_H */