Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/cmd/sas_switch_id/Makefile.in

522 lines
16 KiB
Makefile
Raw Normal View History

Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = cmd/sas_switch_id
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
DIST_COMMON = $(dist_udev_SCRIPTS) $(srcdir)/Makefile.am \
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = \
$(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
Simplify BDI integration Update the code to use the bdi_setup_and_register() helper to simplify the bdi integration code. The updated code now just registers the bdi during mount and destroys it during unmount. The only complication is that for 2.6.32 - 2.6.33 kernels the helper wasn't available so in these cases the zfs code must provide it. Luckily the bdi_setup_and_register() function is trivial. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #367
2011-11-08 00:39:03 +00:00
$(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
Add backing_device_info per-filesystem For a long time now the kernel has been moving away from using the pdflush daemon to write 'old' dirty pages to disk. The primary reason for this is because the pdflush daemon is single threaded and can be a limiting factor for performance. Since pdflush sequentially walks the dirty inode list for each super block any delay in processing can slow down dirty page writeback for all filesystems. The replacement for pdflush is called bdi (backing device info). The bdi system involves creating a per-filesystem control structure each with its own private sets of queues to manage writeback. The advantage is greater parallelism which improves performance and prevents a single filesystem from slowing writeback to the others. For a long time both systems co-existed in the kernel so it wasn't strictly required to implement the bdi scheme. However, as of Linux 2.6.36 kernels the pdflush functionality has been retired. Since ZFS already bypasses the page cache for most I/O this is only an issue for mmap(2) writes which must go through the page cache. Even then adding this missing support for newer kernels was overlooked because there are other mechanisms which can trigger writeback. However, there is one critical case where not implementing the bdi functionality can cause problems. If an application handles a page fault it can enter the balance_dirty_pages() callpath. This will result in the application hanging until the number of dirty pages in the system drops below the dirty ratio. Without a registered backing_device_info for the filesystem the dirty pages will not get written out. Thus the application will hang. As mentioned above this was less of an issue with older kernels because pdflush would eventually write out the dirty pages. This change adds a backing_device_info structure to the zfs_sb_t which is already allocated per-super block. It is then registered when the filesystem mounted and unregistered on unmount. It will not be registered for mounted snapshots which are read-only. This change will result in flush-<pool> thread being dynamically created and destroyed per-mounted filesystem for writeback. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #174
2011-08-02 01:24:40 +00:00
$(top_srcdir)/config/kernel-bdi.m4 \
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
$(top_srcdir)/config/kernel-bio-failfast.m4 \
$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
$(top_srcdir)/config/kernel-blk-end-request.m4 \
$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
$(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
$(top_srcdir)/config/kernel-check-disk-size-change.m4 \
$(top_srcdir)/config/kernel-d-obtain-alias.m4 \
$(top_srcdir)/config/kernel-evict-inode.m4 \
$(top_srcdir)/config/kernel-fmode-t.m4 \
$(top_srcdir)/config/kernel-fsync.m4 \
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
$(top_srcdir)/config/kernel-insert-inode-locked.m4 \
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
$(top_srcdir)/config/kernel-kobj-name-len.m4 \
Linux compat 2.6.39: mount_nodev() The .get_sb callback has been replaced by a .mount callback in the file_system_type structure. When using the new interface the caller must now use the mount_nodev() helper. Unfortunately, the new interface no longer passes the vfsmount down to the zfs layers. This poses a problem for the existing implementation because we currently save this pointer in the super block for latter use. It provides our only entry point in to the namespace layer for manipulating certain mount options. This needed to be done originally to allow commands like 'zfs set atime=off tank' to work properly. It also allowed me to keep more of the original Solaris code unmodified. Under Solaris there is a 1-to-1 mapping between a mount point and a file system so this is a fairly natural thing to do. However, under Linux they many be multiple entries in the namespace which reference the same filesystem. Thus keeping a back reference from the filesystem to the namespace is complicated. Rather than introduce some ugly hack to get the vfsmount and continue as before. I'm leveraging this API change to update the ZFS code to do things in a more natural way for Linux. This has the upside that is resolves the compatibility issue for the long term and fixes several other minor bugs which have been reported. This commit updates the code to remove this vfsmount back reference entirely. All modifications to filesystem mount options are now passed in to the kernel via a '-o remount'. This is the expected Linux mechanism and allows the namespace to properly handle any options which apply to it before passing them on to the file system itself. Aside from fixing the compatibility issue, removing the vfsmount has had the benefit of simplifying the code. This change which fairly involved has turned out nicely. Closes #246 Closes #217 Closes #187 Closes #248 Closes #231
2011-05-19 18:44:07 +00:00
$(top_srcdir)/config/kernel-mount-nodev.m4 \
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
$(top_srcdir)/config/kernel-rq-is_sync.m4 \
Linux compat 2.6.39: security_inode_init_security() The security_inode_init_security() function now takes an additional qstr argument which must be passed in from the dentry if available. Passing a NULL is safe when no qstr is available the relevant security checks will just be skipped. Closes #246 Closes #217 Closes #187
2011-05-19 19:47:32 +00:00
$(top_srcdir)/config/kernel-security-inode-init.m4 \
Tear down and flush the mmap region The inode eviction should unmap the pages associated with the inode. These pages should also be flushed to disk to avoid the data loss. Therefore, use truncate_setsize() in evict_inode() to release the pagecache. The API truncate_setsize() was added in 2.6.35 kernel. To ensure compatibility with the old kernel, the patch defines its own truncate_setsize function. Signed-off-by: Prasad Joshi <pjoshi@stec-inc.com> Closes #255
2011-06-25 12:30:29 +00:00
$(top_srcdir)/config/kernel-truncate-setsize.m4 \
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
$(top_srcdir)/config/kernel-xattr-handler.m4 \
$(top_srcdir)/config/kernel.m4 \
$(top_srcdir)/config/user-arch.m4 \
$(top_srcdir)/config/user-frame-larger-than.m4 \
$(top_srcdir)/config/user-ioctl.m4 \
$(top_srcdir)/config/user-libblkid.m4 \
$(top_srcdir)/config/user-libuuid.m4 \
$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
$(top_srcdir)/config/user-selinux.m4 \
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
$(top_srcdir)/config/user-udev.m4 \
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
$(top_srcdir)/config/zfs-build.m4 \
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/zfs_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
am__installdirs = "$(DESTDIR)$(udevdir)"
SCRIPTS = $(dist_udev_SCRIPTS)
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
ALIEN_VERSION = @ALIEN_VERSION@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
Provide a rc.d script for archlinux Unlike most other Linux distributions archlinux installs its init scripts in /etc/rc.d insead of /etc/init.d. This commit provides an archlinux rc.d script for zfs and extends the build infrastructure to ensure it get's installed in the correct place. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #322
2011-07-10 15:57:33 +00:00
DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DPKG = @DPKG@
DPKGBUILD = @DPKGBUILD@
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
DPKG_VERSION = @DPKG_VERSION@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
GREP = @GREP@
HAVE_ALIEN = @HAVE_ALIEN@
HAVE_DPKG = @HAVE_DPKG@
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
HAVE_RPM = @HAVE_RPM@
HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KERNELCPPFLAGS = @KERNELCPPFLAGS@
KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBBLKID = @LIBBLKID@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSELINUX = @LIBSELINUX@
LIBTOOL = @LIBTOOL@
LIBUUID = @LIBUUID@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
LINUX_VERSION = @LINUX_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPL = @SPL@
SPL_OBJ = @SPL_OBJ@
SPL_SYMBOLS = @SPL_SYMBOLS@
SPL_VERSION = @SPL_VERSION@
STRIP = @STRIP@
TARGET_ASM_DIR = @TARGET_ASM_DIR@
VENDOR = @VENDOR@
VERSION = @VERSION@
ZFS_CONFIG = @ZFS_CONFIG@
ZFS_META_ALIAS = @ZFS_META_ALIAS@
ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
ZFS_META_DATA = @ZFS_META_DATA@
ZFS_META_LICENSE = @ZFS_META_LICENSE@
ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
ZFS_META_NAME = @ZFS_META_NAME@
ZFS_META_RELEASE = @ZFS_META_RELEASE@
ZFS_META_VERSION = @ZFS_META_VERSION@
ZLIB = @ZLIB@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
udevdir = @udevdir@
udevruledir = @udevruledir@
dist_udev_SCRIPTS = sas_switch_id
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu cmd/sas_switch_id/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu cmd/sas_switch_id/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
install-dist_udevSCRIPTS: $(dist_udev_SCRIPTS)
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
@$(NORMAL_INSTALL)
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
test -z "$(udevdir)" || $(MKDIR_P) "$(DESTDIR)$(udevdir)"
@list='$(dist_udev_SCRIPTS)'; test -n "$(udevdir)" || list=; \
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n' \
-e 'h;s|.*|.|' \
-e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) { files[d] = files[d] " " $$1; \
if (++n[d] == $(am__install_max)) { \
print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
else { print "f", d "/" $$4, $$1 } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(udevdir)$$dir'"; \
$(INSTALL_SCRIPT) $$files "$(DESTDIR)$(udevdir)$$dir" || exit $$?; \
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
} \
; done
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
uninstall-dist_udevSCRIPTS:
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
@$(NORMAL_UNINSTALL)
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
@list='$(dist_udev_SCRIPTS)'; test -n "$(udevdir)" || exit 0; \
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
files=`for p in $$list; do echo "$$p"; done | \
sed -e 's,.*/,,;$(transform)'`; \
test -n "$$list" || exit 0; \
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
echo " ( cd '$(DESTDIR)$(udevdir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(udevdir)" && rm -f $$files
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(SCRIPTS)
installdirs:
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
for dir in "$(DESTDIR)$(udevdir)"; do \
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
install-data-am: install-dist_udevSCRIPTS
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
install-dvi: install-dvi-am
install-dvi-am:
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
install-exec-am:
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
uninstall-am: uninstall-dist_udevSCRIPTS
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
install-data install-data-am install-dist_udevSCRIPTS \
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-info install-info-am \
install-man install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
Autogen refresh for udev changes Run autogen.sh using the same autotools versions as upstream: * autoconf-2.63 * automake-1.11.1 * libtool-2.2.6b
2011-08-08 21:50:36 +00:00
ps ps-am uninstall uninstall-am uninstall-dist_udevSCRIPTS
Multipath device manageability improvements Update udev helper scripts to deal with device-mapper devices created by multipathd. These enhancements are targeted at a particular storage network topology under evaluation at LLNL consisting of two SAS switches providing redundant connectivity between multiple server nodes and disk enclosures. The key to making these systems manageable is to create shortnames for each disk that conveys its physical location in a drawer. In a direct-attached topology we infer a disk's enclosure from the PCI bus number and HBA port number in the by-path name provided by udev. In a switched topology, however, multiple drawers are accessed via a single HBA port. We therefore resort to assigning drawer identifiers based on which switch port a drive's enclosure is connected to. This information is available from sysfs. Add options to zpool_layout to generate an /etc/zfs/zdev.conf using symbolic links in /dev/disk/by-id of the form <label>-<UUID>-switch-port:<X>-slot:<Y>. <label> is a string that depends on the subsystem that created the link and defaults to "dm-uuid-mpath" (this prefix is used by multipathd). <UUID> is a unique identifier for the disk typically obtained from the scsi_id program, and <X> and <Y> denote the switch port and disk slot numbers, respectively. Add a callout script sas_switch_id for use by multipathd to help create symlinks of the form described above. Update zpool_id and the udev zpool rules file to handle both multipath devices and conventional drives.
2011-06-21 23:18:27 +00:00
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: