zfs/module/zfs/vdev_indirect.c

1065 lines
34 KiB
C
Raw Normal View History

OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
/*
* CDDL HEADER START
*
* This file and its contents are supplied under the terms of the
* Common Development and Distribution License ("CDDL"), version 1.0.
* You may only use this file in accordance with the terms of version
* 1.0 of the CDDL.
*
* A full copy of the text of the CDDL should have accompanied this
* source. A copy of the CDDL is also available via the Internet at
* http://www.illumos.org/license/CDDL.
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2014, 2015 by Delphix. All rights reserved.
*/
#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/spa_impl.h>
#include <sys/vdev_impl.h>
#include <sys/fs/zfs.h>
#include <sys/zio.h>
#include <sys/metaslab.h>
#include <sys/refcount.h>
#include <sys/dmu.h>
#include <sys/vdev_indirect_mapping.h>
#include <sys/dmu_tx.h>
#include <sys/dsl_synctask.h>
#include <sys/zap.h>
/*
* An indirect vdev corresponds to a vdev that has been removed. Since
* we cannot rewrite block pointers of snapshots, etc., we keep a
* mapping from old location on the removed device to the new location
* on another device in the pool and use this mapping whenever we need
* to access the DVA. Unfortunately, this mapping did not respect
* logical block boundaries when it was first created, and so a DVA on
* this indirect vdev may be "split" into multiple sections that each
* map to a different location. As a consequence, not all DVAs can be
* translated to an equivalent new DVA. Instead we must provide a
* "vdev_remap" operation that executes a callback on each contiguous
* segment of the new location. This function is used in multiple ways:
*
* - reads and repair writes to this device use the callback to create
* a child io for each mapped segment.
*
* - frees and claims to this device use the callback to free or claim
* each mapped segment. (Note that we don't actually need to claim
* log blocks on indirect vdevs, because we don't allocate to
* removing vdevs. However, zdb uses zio_claim() for its leak
* detection.)
*/
/*
* "Big theory statement" for how we mark blocks obsolete.
*
* When a block on an indirect vdev is freed or remapped, a section of
* that vdev's mapping may no longer be referenced (aka "obsolete"). We
* keep track of how much of each mapping entry is obsolete. When
* an entry becomes completely obsolete, we can remove it, thus reducing
* the memory used by the mapping. The complete picture of obsolescence
* is given by the following data structures, described below:
* - the entry-specific obsolete count
* - the vdev-specific obsolete spacemap
* - the pool-specific obsolete bpobj
*
* == On disk data structures used ==
*
* We track the obsolete space for the pool using several objects. Each
* of these objects is created on demand and freed when no longer
* needed, and is assumed to be empty if it does not exist.
* SPA_FEATURE_OBSOLETE_COUNTS includes the count of these objects.
*
* - Each vic_mapping_object (associated with an indirect vdev) can
* have a vimp_counts_object. This is an array of uint32_t's
* with the same number of entries as the vic_mapping_object. When
* the mapping is condensed, entries from the vic_obsolete_sm_object
* (see below) are folded into the counts. Therefore, each
* obsolete_counts entry tells us the number of bytes in the
* corresponding mapping entry that were not referenced when the
* mapping was last condensed.
*
* - Each indirect or removing vdev can have a vic_obsolete_sm_object.
* This is a space map containing an alloc entry for every DVA that
* has been obsoleted since the last time this indirect vdev was
* condensed. We use this object in order to improve performance
* when marking a DVA as obsolete. Instead of modifying an arbitrary
* offset of the vimp_counts_object, we only need to append an entry
* to the end of this object. When a DVA becomes obsolete, it is
* added to the obsolete space map. This happens when the DVA is
* freed, remapped and not referenced by a snapshot, or the last
* snapshot referencing it is destroyed.
*
* - Each dataset can have a ds_remap_deadlist object. This is a
* deadlist object containing all blocks that were remapped in this
* dataset but referenced in a previous snapshot. Blocks can *only*
* appear on this list if they were remapped (dsl_dataset_block_remapped);
* blocks that were killed in a head dataset are put on the normal
* ds_deadlist and marked obsolete when they are freed.
*
* - The pool can have a dp_obsolete_bpobj. This is a list of blocks
* in the pool that need to be marked obsolete. When a snapshot is
* destroyed, we move some of the ds_remap_deadlist to the obsolete
* bpobj (see dsl_destroy_snapshot_handle_remaps()). We then
* asynchronously process the obsolete bpobj, moving its entries to
* the specific vdevs' obsolete space maps.
*
* == Summary of how we mark blocks as obsolete ==
*
* - When freeing a block: if any DVA is on an indirect vdev, append to
* vic_obsolete_sm_object.
* - When remapping a block, add dva to ds_remap_deadlist (if prev snap
* references; otherwise append to vic_obsolete_sm_object).
* - When freeing a snapshot: move parts of ds_remap_deadlist to
* dp_obsolete_bpobj (same algorithm as ds_deadlist).
* - When syncing the spa: process dp_obsolete_bpobj, moving ranges to
* individual vdev's vic_obsolete_sm_object.
*/
/*
* "Big theory statement" for how we condense indirect vdevs.
*
* Condensing an indirect vdev's mapping is the process of determining
* the precise counts of obsolete space for each mapping entry (by
* integrating the obsolete spacemap into the obsolete counts) and
* writing out a new mapping that contains only referenced entries.
*
* We condense a vdev when we expect the mapping to shrink (see
* vdev_indirect_should_condense()), but only perform one condense at a
* time to limit the memory usage. In addition, we use a separate
* open-context thread (spa_condense_indirect_thread) to incrementally
* create the new mapping object in a way that minimizes the impact on
* the rest of the system.
*
* == Generating a new mapping ==
*
* To generate a new mapping, we follow these steps:
*
* 1. Save the old obsolete space map and create a new mapping object
* (see spa_condense_indirect_start_sync()). This initializes the
* spa_condensing_indirect_phys with the "previous obsolete space map",
* which is now read only. Newly obsolete DVAs will be added to a
* new (initially empty) obsolete space map, and will not be
* considered as part of this condense operation.
*
* 2. Construct in memory the precise counts of obsolete space for each
* mapping entry, by incorporating the obsolete space map into the
* counts. (See vdev_indirect_mapping_load_obsolete_{counts,spacemap}().)
*
* 3. Iterate through each mapping entry, writing to the new mapping any
* entries that are not completely obsolete (i.e. which don't have
* obsolete count == mapping length). (See
* spa_condense_indirect_generate_new_mapping().)
*
* 4. Destroy the old mapping object and switch over to the new one
* (spa_condense_indirect_complete_sync).
*
* == Restarting from failure ==
*
* To restart the condense when we import/open the pool, we must start
* at the 2nd step above: reconstruct the precise counts in memory,
* based on the space map + counts. Then in the 3rd step, we start
* iterating where we left off: at vimp_max_offset of the new mapping
* object.
*/
boolean_t zfs_condense_indirect_vdevs_enable = B_TRUE;
/*
* Condense if at least this percent of the bytes in the mapping is
* obsolete. With the default of 25%, the amount of space mapped
* will be reduced to 1% of its original size after at most 16
* condenses. Higher values will condense less often (causing less
* i/o); lower values will reduce the mapping size more quickly.
*/
int zfs_indirect_condense_obsolete_pct = 25;
/*
* Condense if the obsolete space map takes up more than this amount of
* space on disk (logically). This limits the amount of disk space
* consumed by the obsolete space map; the default of 1GB is small enough
* that we typically don't mind "wasting" it.
*/
uint64_t zfs_condense_max_obsolete_bytes = 1024 * 1024 * 1024;
/*
* Don't bother condensing if the mapping uses less than this amount of
* memory. The default of 128KB is considered a "trivial" amount of
* memory and not worth reducing.
*/
unsigned long zfs_condense_min_mapping_bytes = 128 * 1024;
/*
* This is used by the test suite so that it can ensure that certain
* actions happen while in the middle of a condense (which might otherwise
* complete too quickly). If used to reduce the performance impact of
* condensing in production, a maximum value of 1 should be sufficient.
*/
int zfs_condense_indirect_commit_entry_delay_ms = 0;
/*
* Mark the given offset and size as being obsolete in the given txg.
*/
void
vdev_indirect_mark_obsolete(vdev_t *vd, uint64_t offset, uint64_t size,
uint64_t txg)
{
spa_t *spa = vd->vdev_spa;
ASSERT3U(spa_syncing_txg(spa), ==, txg);
ASSERT3U(vd->vdev_indirect_config.vic_mapping_object, !=, 0);
ASSERT(vd->vdev_removing || vd->vdev_ops == &vdev_indirect_ops);
ASSERT(size > 0);
VERIFY(vdev_indirect_mapping_entry_for_offset(
vd->vdev_indirect_mapping, offset) != NULL);
if (spa_feature_is_enabled(spa, SPA_FEATURE_OBSOLETE_COUNTS)) {
mutex_enter(&vd->vdev_obsolete_lock);
range_tree_add(vd->vdev_obsolete_segments, offset, size);
mutex_exit(&vd->vdev_obsolete_lock);
vdev_dirty(vd, 0, NULL, txg);
}
}
/*
* Mark the DVA vdev_id:offset:size as being obsolete in the given tx. This
* wrapper is provided because the DMU does not know about vdev_t's and
* cannot directly call vdev_indirect_mark_obsolete.
*/
void
spa_vdev_indirect_mark_obsolete(spa_t *spa, uint64_t vdev_id, uint64_t offset,
uint64_t size, dmu_tx_t *tx)
{
vdev_t *vd = vdev_lookup_top(spa, vdev_id);
ASSERT(dmu_tx_is_syncing(tx));
/* The DMU can only remap indirect vdevs. */
ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
vdev_indirect_mark_obsolete(vd, offset, size, dmu_tx_get_txg(tx));
}
static spa_condensing_indirect_t *
spa_condensing_indirect_create(spa_t *spa)
{
spa_condensing_indirect_phys_t *scip =
&spa->spa_condensing_indirect_phys;
spa_condensing_indirect_t *sci = kmem_zalloc(sizeof (*sci), KM_SLEEP);
objset_t *mos = spa->spa_meta_objset;
for (int i = 0; i < TXG_SIZE; i++) {
list_create(&sci->sci_new_mapping_entries[i],
sizeof (vdev_indirect_mapping_entry_t),
offsetof(vdev_indirect_mapping_entry_t, vime_node));
}
sci->sci_new_mapping =
vdev_indirect_mapping_open(mos, scip->scip_next_mapping_object);
return (sci);
}
static void
spa_condensing_indirect_destroy(spa_condensing_indirect_t *sci)
{
for (int i = 0; i < TXG_SIZE; i++)
list_destroy(&sci->sci_new_mapping_entries[i]);
if (sci->sci_new_mapping != NULL)
vdev_indirect_mapping_close(sci->sci_new_mapping);
kmem_free(sci, sizeof (*sci));
}
boolean_t
vdev_indirect_should_condense(vdev_t *vd)
{
vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping;
spa_t *spa = vd->vdev_spa;
ASSERT(dsl_pool_sync_context(spa->spa_dsl_pool));
if (!zfs_condense_indirect_vdevs_enable)
return (B_FALSE);
/*
* We can only condense one indirect vdev at a time.
*/
if (spa->spa_condensing_indirect != NULL)
return (B_FALSE);
if (spa_shutting_down(spa))
return (B_FALSE);
/*
* The mapping object size must not change while we are
* condensing, so we can only condense indirect vdevs
* (not vdevs that are still in the middle of being removed).
*/
if (vd->vdev_ops != &vdev_indirect_ops)
return (B_FALSE);
/*
* If nothing new has been marked obsolete, there is no
* point in condensing.
*/
if (vd->vdev_obsolete_sm == NULL) {
ASSERT0(vdev_obsolete_sm_object(vd));
return (B_FALSE);
}
ASSERT(vd->vdev_obsolete_sm != NULL);
ASSERT3U(vdev_obsolete_sm_object(vd), ==,
space_map_object(vd->vdev_obsolete_sm));
uint64_t bytes_mapped = vdev_indirect_mapping_bytes_mapped(vim);
uint64_t bytes_obsolete = space_map_allocated(vd->vdev_obsolete_sm);
uint64_t mapping_size = vdev_indirect_mapping_size(vim);
uint64_t obsolete_sm_size = space_map_length(vd->vdev_obsolete_sm);
ASSERT3U(bytes_obsolete, <=, bytes_mapped);
/*
* If a high percentage of the bytes that are mapped have become
* obsolete, condense (unless the mapping is already small enough).
* This has a good chance of reducing the amount of memory used
* by the mapping.
*/
if (bytes_obsolete * 100 / bytes_mapped >=
zfs_indirect_condense_obsolete_pct &&
mapping_size > zfs_condense_min_mapping_bytes) {
zfs_dbgmsg("should condense vdev %llu because obsolete "
"spacemap covers %d%% of %lluMB mapping",
(u_longlong_t)vd->vdev_id,
(int)(bytes_obsolete * 100 / bytes_mapped),
(u_longlong_t)bytes_mapped / 1024 / 1024);
return (B_TRUE);
}
/*
* If the obsolete space map takes up too much space on disk,
* condense in order to free up this disk space.
*/
if (obsolete_sm_size >= zfs_condense_max_obsolete_bytes) {
zfs_dbgmsg("should condense vdev %llu because obsolete sm "
"length %lluMB >= max size %lluMB",
(u_longlong_t)vd->vdev_id,
(u_longlong_t)obsolete_sm_size / 1024 / 1024,
(u_longlong_t)zfs_condense_max_obsolete_bytes /
1024 / 1024);
return (B_TRUE);
}
return (B_FALSE);
}
/*
* This sync task completes (finishes) a condense, deleting the old
* mapping and replacing it with the new one.
*/
static void
spa_condense_indirect_complete_sync(void *arg, dmu_tx_t *tx)
{
spa_condensing_indirect_t *sci = arg;
spa_t *spa = dmu_tx_pool(tx)->dp_spa;
spa_condensing_indirect_phys_t *scip =
&spa->spa_condensing_indirect_phys;
vdev_t *vd = vdev_lookup_top(spa, scip->scip_vdev);
vdev_indirect_config_t *vic = &vd->vdev_indirect_config;
objset_t *mos = spa->spa_meta_objset;
vdev_indirect_mapping_t *old_mapping = vd->vdev_indirect_mapping;
uint64_t old_count = vdev_indirect_mapping_num_entries(old_mapping);
uint64_t new_count =
vdev_indirect_mapping_num_entries(sci->sci_new_mapping);
ASSERT(dmu_tx_is_syncing(tx));
ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
ASSERT3P(sci, ==, spa->spa_condensing_indirect);
for (int i = 0; i < TXG_SIZE; i++) {
ASSERT(list_is_empty(&sci->sci_new_mapping_entries[i]));
}
ASSERT(vic->vic_mapping_object != 0);
ASSERT3U(vd->vdev_id, ==, scip->scip_vdev);
ASSERT(scip->scip_next_mapping_object != 0);
ASSERT(scip->scip_prev_obsolete_sm_object != 0);
/*
* Reset vdev_indirect_mapping to refer to the new object.
*/
rw_enter(&vd->vdev_indirect_rwlock, RW_WRITER);
vdev_indirect_mapping_close(vd->vdev_indirect_mapping);
vd->vdev_indirect_mapping = sci->sci_new_mapping;
rw_exit(&vd->vdev_indirect_rwlock);
sci->sci_new_mapping = NULL;
vdev_indirect_mapping_free(mos, vic->vic_mapping_object, tx);
vic->vic_mapping_object = scip->scip_next_mapping_object;
scip->scip_next_mapping_object = 0;
space_map_free_obj(mos, scip->scip_prev_obsolete_sm_object, tx);
spa_feature_decr(spa, SPA_FEATURE_OBSOLETE_COUNTS, tx);
scip->scip_prev_obsolete_sm_object = 0;
scip->scip_vdev = 0;
VERIFY0(zap_remove(mos, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_CONDENSING_INDIRECT, tx));
spa_condensing_indirect_destroy(spa->spa_condensing_indirect);
spa->spa_condensing_indirect = NULL;
zfs_dbgmsg("finished condense of vdev %llu in txg %llu: "
"new mapping object %llu has %llu entries "
"(was %llu entries)",
vd->vdev_id, dmu_tx_get_txg(tx), vic->vic_mapping_object,
new_count, old_count);
vdev_config_dirty(spa->spa_root_vdev);
}
/*
* This sync task appends entries to the new mapping object.
*/
static void
spa_condense_indirect_commit_sync(void *arg, dmu_tx_t *tx)
{
spa_condensing_indirect_t *sci = arg;
uint64_t txg = dmu_tx_get_txg(tx);
ASSERTV(spa_t *spa = dmu_tx_pool(tx)->dp_spa);
ASSERT(dmu_tx_is_syncing(tx));
ASSERT3P(sci, ==, spa->spa_condensing_indirect);
vdev_indirect_mapping_add_entries(sci->sci_new_mapping,
&sci->sci_new_mapping_entries[txg & TXG_MASK], tx);
ASSERT(list_is_empty(&sci->sci_new_mapping_entries[txg & TXG_MASK]));
}
/*
* Open-context function to add one entry to the new mapping. The new
* entry will be remembered and written from syncing context.
*/
static void
spa_condense_indirect_commit_entry(spa_t *spa,
vdev_indirect_mapping_entry_phys_t *vimep, uint32_t count)
{
spa_condensing_indirect_t *sci = spa->spa_condensing_indirect;
ASSERT3U(count, <, DVA_GET_ASIZE(&vimep->vimep_dst));
dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir);
dmu_tx_hold_space(tx, sizeof (*vimep) + sizeof (count));
VERIFY0(dmu_tx_assign(tx, TXG_WAIT));
int txgoff = dmu_tx_get_txg(tx) & TXG_MASK;
/*
* If we are the first entry committed this txg, kick off the sync
* task to write to the MOS on our behalf.
*/
if (list_is_empty(&sci->sci_new_mapping_entries[txgoff])) {
dsl_sync_task_nowait(dmu_tx_pool(tx),
spa_condense_indirect_commit_sync, sci,
0, ZFS_SPACE_CHECK_NONE, tx);
}
vdev_indirect_mapping_entry_t *vime =
kmem_alloc(sizeof (*vime), KM_SLEEP);
vime->vime_mapping = *vimep;
vime->vime_obsolete_count = count;
list_insert_tail(&sci->sci_new_mapping_entries[txgoff], vime);
dmu_tx_commit(tx);
}
static void
spa_condense_indirect_generate_new_mapping(vdev_t *vd,
uint32_t *obsolete_counts, uint64_t start_index)
{
spa_t *spa = vd->vdev_spa;
uint64_t mapi = start_index;
vdev_indirect_mapping_t *old_mapping = vd->vdev_indirect_mapping;
uint64_t old_num_entries =
vdev_indirect_mapping_num_entries(old_mapping);
ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
ASSERT3U(vd->vdev_id, ==, spa->spa_condensing_indirect_phys.scip_vdev);
zfs_dbgmsg("starting condense of vdev %llu from index %llu",
(u_longlong_t)vd->vdev_id,
(u_longlong_t)mapi);
while (mapi < old_num_entries && !spa_shutting_down(spa)) {
vdev_indirect_mapping_entry_phys_t *entry =
&old_mapping->vim_entries[mapi];
uint64_t entry_size = DVA_GET_ASIZE(&entry->vimep_dst);
ASSERT3U(obsolete_counts[mapi], <=, entry_size);
if (obsolete_counts[mapi] < entry_size) {
spa_condense_indirect_commit_entry(spa, entry,
obsolete_counts[mapi]);
/*
* This delay may be requested for testing, debugging,
* or performance reasons.
*/
hrtime_t now = gethrtime();
hrtime_t sleep_until = now + MSEC2NSEC(
zfs_condense_indirect_commit_entry_delay_ms);
zfs_sleep_until(sleep_until);
}
mapi++;
}
if (spa_shutting_down(spa)) {
zfs_dbgmsg("pausing condense of vdev %llu at index %llu",
(u_longlong_t)vd->vdev_id,
(u_longlong_t)mapi);
}
}
static void
spa_condense_indirect_thread(void *arg)
{
vdev_t *vd = arg;
spa_t *spa = vd->vdev_spa;
spa_condensing_indirect_t *sci = spa->spa_condensing_indirect;
spa_condensing_indirect_phys_t *scip =
&spa->spa_condensing_indirect_phys;
uint32_t *counts;
uint64_t start_index;
vdev_indirect_mapping_t *old_mapping = vd->vdev_indirect_mapping;
space_map_t *prev_obsolete_sm = NULL;
ASSERT3U(vd->vdev_id, ==, scip->scip_vdev);
ASSERT(scip->scip_next_mapping_object != 0);
ASSERT(scip->scip_prev_obsolete_sm_object != 0);
ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
for (int i = 0; i < TXG_SIZE; i++) {
/*
* The list must start out empty in order for the
* _commit_sync() sync task to be properly registered
* on the first call to _commit_entry(); so it's wise
* to double check and ensure we actually are starting
* with empty lists.
*/
ASSERT(list_is_empty(&sci->sci_new_mapping_entries[i]));
}
VERIFY0(space_map_open(&prev_obsolete_sm, spa->spa_meta_objset,
scip->scip_prev_obsolete_sm_object, 0, vd->vdev_asize, 0));
space_map_update(prev_obsolete_sm);
counts = vdev_indirect_mapping_load_obsolete_counts(old_mapping);
if (prev_obsolete_sm != NULL) {
vdev_indirect_mapping_load_obsolete_spacemap(old_mapping,
counts, prev_obsolete_sm);
}
space_map_close(prev_obsolete_sm);
/*
* Generate new mapping. Determine what index to continue from
* based on the max offset that we've already written in the
* new mapping.
*/
uint64_t max_offset =
vdev_indirect_mapping_max_offset(sci->sci_new_mapping);
if (max_offset == 0) {
/* We haven't written anything to the new mapping yet. */
start_index = 0;
} else {
/*
* Pick up from where we left off. _entry_for_offset()
* returns a pointer into the vim_entries array. If
* max_offset is greater than any of the mappings
* contained in the table NULL will be returned and
* that indicates we've exhausted our iteration of the
* old_mapping.
*/
vdev_indirect_mapping_entry_phys_t *entry =
vdev_indirect_mapping_entry_for_offset_or_next(old_mapping,
max_offset);
if (entry == NULL) {
/*
* We've already written the whole new mapping.
* This special value will cause us to skip the
* generate_new_mapping step and just do the sync
* task to complete the condense.
*/
start_index = UINT64_MAX;
} else {
start_index = entry - old_mapping->vim_entries;
ASSERT3U(start_index, <,
vdev_indirect_mapping_num_entries(old_mapping));
}
}
spa_condense_indirect_generate_new_mapping(vd, counts, start_index);
vdev_indirect_mapping_free_obsolete_counts(old_mapping, counts);
/*
* We may have bailed early from generate_new_mapping(), if
* the spa is shutting down. In this case, do not complete
* the condense.
*/
if (!spa_shutting_down(spa)) {
VERIFY0(dsl_sync_task(spa_name(spa), NULL,
spa_condense_indirect_complete_sync, sci, 0,
ZFS_SPACE_CHECK_NONE));
}
mutex_enter(&spa->spa_async_lock);
spa->spa_condense_thread = NULL;
cv_broadcast(&spa->spa_async_cv);
mutex_exit(&spa->spa_async_lock);
}
/*
* Sync task to begin the condensing process.
*/
void
spa_condense_indirect_start_sync(vdev_t *vd, dmu_tx_t *tx)
{
spa_t *spa = vd->vdev_spa;
spa_condensing_indirect_phys_t *scip =
&spa->spa_condensing_indirect_phys;
ASSERT0(scip->scip_next_mapping_object);
ASSERT0(scip->scip_prev_obsolete_sm_object);
ASSERT0(scip->scip_vdev);
ASSERT(dmu_tx_is_syncing(tx));
ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops);
ASSERT(spa_feature_is_active(spa, SPA_FEATURE_OBSOLETE_COUNTS));
ASSERT(vdev_indirect_mapping_num_entries(vd->vdev_indirect_mapping));
uint64_t obsolete_sm_obj = vdev_obsolete_sm_object(vd);
ASSERT(obsolete_sm_obj != 0);
scip->scip_vdev = vd->vdev_id;
scip->scip_next_mapping_object =
vdev_indirect_mapping_alloc(spa->spa_meta_objset, tx);
scip->scip_prev_obsolete_sm_object = obsolete_sm_obj;
/*
* We don't need to allocate a new space map object, since
* vdev_indirect_sync_obsolete will allocate one when needed.
*/
space_map_close(vd->vdev_obsolete_sm);
vd->vdev_obsolete_sm = NULL;
VERIFY0(zap_remove(spa->spa_meta_objset, vd->vdev_top_zap,
VDEV_TOP_ZAP_INDIRECT_OBSOLETE_SM, tx));
VERIFY0(zap_add(spa->spa_dsl_pool->dp_meta_objset,
DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_CONDENSING_INDIRECT, sizeof (uint64_t),
sizeof (*scip) / sizeof (uint64_t), scip, tx));
ASSERT3P(spa->spa_condensing_indirect, ==, NULL);
spa->spa_condensing_indirect = spa_condensing_indirect_create(spa);
zfs_dbgmsg("starting condense of vdev %llu in txg %llu: "
"posm=%llu nm=%llu",
vd->vdev_id, dmu_tx_get_txg(tx),
(u_longlong_t)scip->scip_prev_obsolete_sm_object,
(u_longlong_t)scip->scip_next_mapping_object);
ASSERT3P(spa->spa_condense_thread, ==, NULL);
spa->spa_condense_thread = thread_create(NULL, 0,
spa_condense_indirect_thread, vd, 0, &p0, TS_RUN, minclsyspri);
}
/*
* Sync to the given vdev's obsolete space map any segments that are no longer
* referenced as of the given txg.
*
* If the obsolete space map doesn't exist yet, create and open it.
*/
void
vdev_indirect_sync_obsolete(vdev_t *vd, dmu_tx_t *tx)
{
spa_t *spa = vd->vdev_spa;
ASSERTV(vdev_indirect_config_t *vic = &vd->vdev_indirect_config);
ASSERT3U(vic->vic_mapping_object, !=, 0);
ASSERT(range_tree_space(vd->vdev_obsolete_segments) > 0);
ASSERT(vd->vdev_removing || vd->vdev_ops == &vdev_indirect_ops);
ASSERT(spa_feature_is_enabled(spa, SPA_FEATURE_OBSOLETE_COUNTS));
if (vdev_obsolete_sm_object(vd) == 0) {
uint64_t obsolete_sm_object =
space_map_alloc(spa->spa_meta_objset, tx);
ASSERT(vd->vdev_top_zap != 0);
VERIFY0(zap_add(vd->vdev_spa->spa_meta_objset, vd->vdev_top_zap,
VDEV_TOP_ZAP_INDIRECT_OBSOLETE_SM,
sizeof (obsolete_sm_object), 1, &obsolete_sm_object, tx));
ASSERT3U(vdev_obsolete_sm_object(vd), !=, 0);
spa_feature_incr(spa, SPA_FEATURE_OBSOLETE_COUNTS, tx);
VERIFY0(space_map_open(&vd->vdev_obsolete_sm,
spa->spa_meta_objset, obsolete_sm_object,
0, vd->vdev_asize, 0));
space_map_update(vd->vdev_obsolete_sm);
}
ASSERT(vd->vdev_obsolete_sm != NULL);
ASSERT3U(vdev_obsolete_sm_object(vd), ==,
space_map_object(vd->vdev_obsolete_sm));
space_map_write(vd->vdev_obsolete_sm,
vd->vdev_obsolete_segments, SM_ALLOC, tx);
space_map_update(vd->vdev_obsolete_sm);
range_tree_vacate(vd->vdev_obsolete_segments, NULL, NULL);
}
int
spa_condense_init(spa_t *spa)
{
int error = zap_lookup(spa->spa_meta_objset,
DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_CONDENSING_INDIRECT, sizeof (uint64_t),
sizeof (spa->spa_condensing_indirect_phys) / sizeof (uint64_t),
&spa->spa_condensing_indirect_phys);
if (error == 0) {
if (spa_writeable(spa)) {
spa->spa_condensing_indirect =
spa_condensing_indirect_create(spa);
}
return (0);
} else if (error == ENOENT) {
return (0);
} else {
return (error);
}
}
void
spa_condense_fini(spa_t *spa)
{
if (spa->spa_condensing_indirect != NULL) {
spa_condensing_indirect_destroy(spa->spa_condensing_indirect);
spa->spa_condensing_indirect = NULL;
}
}
/*
* Restart the condense - called when the pool is opened.
*/
void
spa_condense_indirect_restart(spa_t *spa)
{
vdev_t *vd;
ASSERT(spa->spa_condensing_indirect != NULL);
spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
vd = vdev_lookup_top(spa,
spa->spa_condensing_indirect_phys.scip_vdev);
ASSERT(vd != NULL);
spa_config_exit(spa, SCL_VDEV, FTAG);
ASSERT3P(spa->spa_condense_thread, ==, NULL);
spa->spa_condense_thread = thread_create(NULL, 0,
spa_condense_indirect_thread, vd, 0, &p0, TS_RUN,
minclsyspri);
}
/*
* Gets the obsolete spacemap object from the vdev's ZAP.
* Returns the spacemap object, or 0 if it wasn't in the ZAP or the ZAP doesn't
* exist yet.
*/
int
vdev_obsolete_sm_object(vdev_t *vd)
{
ASSERT0(spa_config_held(vd->vdev_spa, SCL_ALL, RW_WRITER));
if (vd->vdev_top_zap == 0) {
return (0);
}
uint64_t sm_obj = 0;
int err;
err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_top_zap,
VDEV_TOP_ZAP_INDIRECT_OBSOLETE_SM, sizeof (sm_obj), 1, &sm_obj);
ASSERT(err == 0 || err == ENOENT);
return (sm_obj);
}
boolean_t
vdev_obsolete_counts_are_precise(vdev_t *vd)
{
ASSERT0(spa_config_held(vd->vdev_spa, SCL_ALL, RW_WRITER));
if (vd->vdev_top_zap == 0) {
return (B_FALSE);
}
uint64_t val = 0;
int err;
err = zap_lookup(vd->vdev_spa->spa_meta_objset, vd->vdev_top_zap,
VDEV_TOP_ZAP_OBSOLETE_COUNTS_ARE_PRECISE, sizeof (val), 1, &val);
ASSERT(err == 0 || err == ENOENT);
return (val != 0);
}
/* ARGSUSED */
static void
vdev_indirect_close(vdev_t *vd)
{
}
/* ARGSUSED */
static void
vdev_indirect_io_done(zio_t *zio)
{
}
/* ARGSUSED */
static int
vdev_indirect_open(vdev_t *vd, uint64_t *psize, uint64_t *max_psize,
uint64_t *ashift)
{
*psize = *max_psize = vd->vdev_asize +
VDEV_LABEL_START_SIZE + VDEV_LABEL_END_SIZE;
*ashift = vd->vdev_ashift;
return (0);
}
typedef struct remap_segment {
vdev_t *rs_vd;
uint64_t rs_offset;
uint64_t rs_asize;
uint64_t rs_split_offset;
list_node_t rs_node;
} remap_segment_t;
remap_segment_t *
rs_alloc(vdev_t *vd, uint64_t offset, uint64_t asize, uint64_t split_offset)
{
remap_segment_t *rs = kmem_alloc(sizeof (remap_segment_t), KM_SLEEP);
rs->rs_vd = vd;
rs->rs_offset = offset;
rs->rs_asize = asize;
rs->rs_split_offset = split_offset;
return (rs);
}
/*
* Goes through the relevant indirect mappings until it hits a concrete vdev
* and issues the callback. On the way to the concrete vdev, if any other
* indirect vdevs are encountered, then the callback will also be called on
* each of those indirect vdevs. For example, if the segment is mapped to
* segment A on indirect vdev 1, and then segment A on indirect vdev 1 is
* mapped to segment B on concrete vdev 2, then the callback will be called on
* both vdev 1 and vdev 2.
*
* While the callback passed to vdev_indirect_remap() is called on every vdev
* the function encounters, certain callbacks only care about concrete vdevs.
* These types of callbacks should return immediately and explicitly when they
* are called on an indirect vdev.
*
* Because there is a possibility that a DVA section in the indirect device
* has been split into multiple sections in our mapping, we keep track
* of the relevant contiguous segments of the new location (remap_segment_t)
* in a stack. This way we can call the callback for each of the new sections
* created by a single section of the indirect device. Note though, that in
* this scenario the callbacks in each split block won't occur in-order in
* terms of offset, so callers should not make any assumptions about that.
*
* For callbacks that don't handle split blocks and immediately return when
* they encounter them (as is the case for remap_blkptr_cb), the caller can
* assume that its callback will be applied from the first indirect vdev
* encountered to the last one and then the concrete vdev, in that order.
*/
static void
vdev_indirect_remap(vdev_t *vd, uint64_t offset, uint64_t asize,
void (*func)(uint64_t, vdev_t *, uint64_t, uint64_t, void *), void *arg)
{
list_t stack;
spa_t *spa = vd->vdev_spa;
list_create(&stack, sizeof (remap_segment_t),
offsetof(remap_segment_t, rs_node));
for (remap_segment_t *rs = rs_alloc(vd, offset, asize, 0);
rs != NULL; rs = list_remove_head(&stack)) {
vdev_t *v = rs->rs_vd;
/*
* Note: this can be called from open context
* (eg. zio_read()), so we need the rwlock to prevent
* the mapping from being changed by condensing.
*/
rw_enter(&v->vdev_indirect_rwlock, RW_READER);
vdev_indirect_mapping_t *vim = v->vdev_indirect_mapping;
ASSERT3P(vim, !=, NULL);
ASSERT(spa_config_held(spa, SCL_ALL, RW_READER) != 0);
ASSERT(rs->rs_asize > 0);
vdev_indirect_mapping_entry_phys_t *mapping =
vdev_indirect_mapping_entry_for_offset(vim, rs->rs_offset);
ASSERT3P(mapping, !=, NULL);
while (rs->rs_asize > 0) {
/*
* Note: the vdev_indirect_mapping can not change
* while we are running. It only changes while the
* removal is in progress, and then only from syncing
* context. While a removal is in progress, this
* function is only called for frees, which also only
* happen from syncing context.
*/
uint64_t size = DVA_GET_ASIZE(&mapping->vimep_dst);
uint64_t dst_offset =
DVA_GET_OFFSET(&mapping->vimep_dst);
uint64_t dst_vdev = DVA_GET_VDEV(&mapping->vimep_dst);
ASSERT3U(rs->rs_offset, >=,
DVA_MAPPING_GET_SRC_OFFSET(mapping));
ASSERT3U(rs->rs_offset, <,
DVA_MAPPING_GET_SRC_OFFSET(mapping) + size);
ASSERT3U(dst_vdev, !=, v->vdev_id);
uint64_t inner_offset = rs->rs_offset -
DVA_MAPPING_GET_SRC_OFFSET(mapping);
uint64_t inner_size =
MIN(rs->rs_asize, size - inner_offset);
vdev_t *dst_v = vdev_lookup_top(spa, dst_vdev);
ASSERT3P(dst_v, !=, NULL);
if (dst_v->vdev_ops == &vdev_indirect_ops) {
list_insert_head(&stack,
rs_alloc(dst_v, dst_offset + inner_offset,
inner_size, rs->rs_split_offset));
}
if ((zfs_flags & ZFS_DEBUG_INDIRECT_REMAP) &&
IS_P2ALIGNED(inner_size, 2 * SPA_MINBLOCKSIZE)) {
/*
* Note: This clause exists only solely for
* testing purposes. We use it to ensure that
* split blocks work and that the callbacks
* using them yield the same result if issued
* in reverse order.
*/
uint64_t inner_half = inner_size / 2;
func(rs->rs_split_offset + inner_half, dst_v,
dst_offset + inner_offset + inner_half,
inner_half, arg);
func(rs->rs_split_offset, dst_v,
dst_offset + inner_offset,
inner_half, arg);
} else {
func(rs->rs_split_offset, dst_v,
dst_offset + inner_offset,
inner_size, arg);
}
rs->rs_offset += inner_size;
rs->rs_asize -= inner_size;
rs->rs_split_offset += inner_size;
mapping++;
}
rw_exit(&v->vdev_indirect_rwlock);
kmem_free(rs, sizeof (remap_segment_t));
}
list_destroy(&stack);
}
static void
vdev_indirect_child_io_done(zio_t *zio)
{
zio_t *pio = zio->io_private;
mutex_enter(&pio->io_lock);
pio->io_error = zio_worst_error(pio->io_error, zio->io_error);
mutex_exit(&pio->io_lock);
abd_put(zio->io_abd);
}
static void
vdev_indirect_io_start_cb(uint64_t split_offset, vdev_t *vd, uint64_t offset,
uint64_t size, void *arg)
{
zio_t *zio = arg;
ASSERT3P(vd, !=, NULL);
if (vd->vdev_ops == &vdev_indirect_ops)
return;
zio_nowait(zio_vdev_child_io(zio, NULL, vd, offset,
abd_get_offset(zio->io_abd, split_offset),
size, zio->io_type, zio->io_priority,
0, vdev_indirect_child_io_done, zio));
}
static void
vdev_indirect_io_start(zio_t *zio)
{
ASSERTV(spa_t *spa = zio->io_spa);
ASSERT(spa_config_held(spa, SCL_ALL, RW_READER) != 0);
if (zio->io_type != ZIO_TYPE_READ) {
ASSERT3U(zio->io_type, ==, ZIO_TYPE_WRITE);
ASSERT((zio->io_flags &
(ZIO_FLAG_SELF_HEAL | ZIO_FLAG_INDUCE_DAMAGE)) != 0);
}
vdev_indirect_remap(zio->io_vd, zio->io_offset, zio->io_size,
vdev_indirect_io_start_cb, zio);
zio_execute(zio);
}
vdev_ops_t vdev_indirect_ops = {
vdev_indirect_open,
vdev_indirect_close,
vdev_default_asize,
vdev_indirect_io_start,
vdev_indirect_io_done,
NULL,
NULL,
NULL,
NULL,
vdev_indirect_remap,
VDEV_TYPE_INDIRECT, /* name of this vdev type */
B_FALSE /* leaf vdev */
};
#if defined(_KERNEL) && defined(HAVE_SPL)
EXPORT_SYMBOL(rs_alloc);
EXPORT_SYMBOL(spa_condense_fini);
EXPORT_SYMBOL(spa_condense_indirect_restart);
EXPORT_SYMBOL(spa_condense_indirect_start_sync);
EXPORT_SYMBOL(spa_condense_init);
EXPORT_SYMBOL(spa_vdev_indirect_mark_obsolete);
EXPORT_SYMBOL(vdev_indirect_mark_obsolete);
EXPORT_SYMBOL(vdev_indirect_should_condense);
EXPORT_SYMBOL(vdev_indirect_sync_obsolete);
EXPORT_SYMBOL(vdev_obsolete_counts_are_precise);
EXPORT_SYMBOL(vdev_obsolete_sm_object);
/* CSTYLED */
module_param(zfs_condense_min_mapping_bytes, ulong, 0644);
MODULE_PARM_DESC(zfs_condense_min_mapping_bytes,
"Minimum size of vdev mapping to condense");
module_param(zfs_condense_indirect_commit_entry_delay_ms, int, 0644);
MODULE_PARM_DESC(zfs_condense_indirect_commit_entry_delay_ms,
"Delay while condensing vdev mapping");
#endif