zfs/include/sys/spa.h

906 lines
33 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011, 2014 by Delphix. All rights reserved.
* Copyright 2011 Nexenta Systems, Inc. All rights reserved.
* Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
2008-11-20 20:01:55 +00:00
*/
#ifndef _SYS_SPA_H
#define _SYS_SPA_H
#include <sys/avl.h>
#include <sys/zfs_context.h>
#include <sys/kstat.h>
2008-11-20 20:01:55 +00:00
#include <sys/nvpair.h>
#include <sys/sysmacros.h>
#include <sys/types.h>
#include <sys/fs/zfs.h>
#include <sys/spa_checksum.h>
2008-11-20 20:01:55 +00:00
#ifdef __cplusplus
extern "C" {
#endif
/*
* Forward references that lots of things need.
*/
typedef struct spa spa_t;
typedef struct vdev vdev_t;
typedef struct metaslab metaslab_t;
typedef struct metaslab_group metaslab_group_t;
typedef struct metaslab_class metaslab_class_t;
typedef struct zio zio_t;
2008-11-20 20:01:55 +00:00
typedef struct zilog zilog_t;
typedef struct spa_aux_vdev spa_aux_vdev_t;
typedef struct ddt ddt_t;
typedef struct ddt_entry ddt_entry_t;
typedef struct zbookmark_phys zbookmark_phys_t;
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
2008-11-20 20:01:55 +00:00
struct dsl_pool;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
struct dsl_dataset;
2008-11-20 20:01:55 +00:00
/*
* General-purpose 32-bit and 64-bit bitfield encodings.
*/
#define BF32_DECODE(x, low, len) P2PHASE((x) >> (low), 1U << (len))
#define BF64_DECODE(x, low, len) P2PHASE((x) >> (low), 1ULL << (len))
#define BF32_ENCODE(x, low, len) (P2PHASE((x), 1U << (len)) << (low))
#define BF64_ENCODE(x, low, len) (P2PHASE((x), 1ULL << (len)) << (low))
#define BF32_GET(x, low, len) BF32_DECODE(x, low, len)
#define BF64_GET(x, low, len) BF64_DECODE(x, low, len)
#define BF32_SET(x, low, len, val) do { \
ASSERT3U(val, <, 1U << (len)); \
ASSERT3U(low + len, <=, 32); \
(x) ^= BF32_ENCODE((x >> low) ^ (val), low, len); \
_NOTE(CONSTCOND) } while (0)
#define BF64_SET(x, low, len, val) do { \
ASSERT3U(val, <, 1ULL << (len)); \
ASSERT3U(low + len, <=, 64); \
((x) ^= BF64_ENCODE((x >> low) ^ (val), low, len)); \
_NOTE(CONSTCOND) } while (0)
2008-11-20 20:01:55 +00:00
#define BF32_GET_SB(x, low, len, shift, bias) \
((BF32_GET(x, low, len) + (bias)) << (shift))
#define BF64_GET_SB(x, low, len, shift, bias) \
((BF64_GET(x, low, len) + (bias)) << (shift))
#define BF32_SET_SB(x, low, len, shift, bias, val) do { \
ASSERT(IS_P2ALIGNED(val, 1U << shift)); \
ASSERT3S((val) >> (shift), >=, bias); \
BF32_SET(x, low, len, ((val) >> (shift)) - (bias)); \
_NOTE(CONSTCOND) } while (0)
#define BF64_SET_SB(x, low, len, shift, bias, val) do { \
ASSERT(IS_P2ALIGNED(val, 1ULL << shift)); \
ASSERT3S((val) >> (shift), >=, bias); \
BF64_SET(x, low, len, ((val) >> (shift)) - (bias)); \
_NOTE(CONSTCOND) } while (0)
2008-11-20 20:01:55 +00:00
/*
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
* We currently support block sizes from 512 bytes to 16MB.
* The benefits of larger blocks, and thus larger IO, need to be weighed
* against the cost of COWing a giant block to modify one byte, and the
* large latency of reading or writing a large block.
*
* Note that although blocks up to 16MB are supported, the recordsize
* property can not be set larger than zfs_max_recordsize (default 1MB).
* See the comment near zfs_max_recordsize in dsl_dataset.c for details.
*
* Note that although the LSIZE field of the blkptr_t can store sizes up
* to 32MB, the dnode's dn_datablkszsec can only store sizes up to
* 32MB - 512 bytes. Therefore, we limit SPA_MAXBLOCKSIZE to 16MB.
2008-11-20 20:01:55 +00:00
*/
#define SPA_MINBLOCKSHIFT 9
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
#define SPA_OLD_MAXBLOCKSHIFT 17
#define SPA_MAXBLOCKSHIFT 24
2008-11-20 20:01:55 +00:00
#define SPA_MINBLOCKSIZE (1ULL << SPA_MINBLOCKSHIFT)
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
#define SPA_OLD_MAXBLOCKSIZE (1ULL << SPA_OLD_MAXBLOCKSHIFT)
2008-11-20 20:01:55 +00:00
#define SPA_MAXBLOCKSIZE (1ULL << SPA_MAXBLOCKSHIFT)
/*
* Size of block to hold the configuration data (a packed nvlist)
*/
#define SPA_CONFIG_BLOCKSIZE (1ULL << 14)
2008-11-20 20:01:55 +00:00
/*
* The DVA size encodings for LSIZE and PSIZE support blocks up to 32MB.
* The ASIZE encoding should be at least 64 times larger (6 more bits)
* to support up to 4-way RAID-Z mirror mode with worst-case gang block
* overhead, three DVAs per bp, plus one more bit in case we do anything
* else that expands the ASIZE.
*/
#define SPA_LSIZEBITS 16 /* LSIZE up to 32M (2^16 * 512) */
#define SPA_PSIZEBITS 16 /* PSIZE up to 32M (2^16 * 512) */
#define SPA_ASIZEBITS 24 /* ASIZE up to 64 times larger */
/*
* All SPA data is represented by 128-bit data virtual addresses (DVAs).
* The members of the dva_t should be considered opaque outside the SPA.
*/
typedef struct dva {
uint64_t dva_word[2];
} dva_t;
/*
* Each block is described by its DVAs, time of birth, checksum, etc.
* The word-by-word, bit-by-bit layout of the blkptr is as follows:
*
* 64 56 48 40 32 24 16 8 0
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 0 | vdev1 | GRID | ASIZE |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 1 |G| offset1 |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 2 | vdev2 | GRID | ASIZE |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 3 |G| offset2 |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 4 | vdev3 | GRID | ASIZE |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 5 |G| offset3 |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 6 |BDX|lvl| type | cksum |E| comp| PSIZE | LSIZE |
2008-11-20 20:01:55 +00:00
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 7 | padding |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 8 | padding |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 9 | physical birth txg |
2008-11-20 20:01:55 +00:00
* +-------+-------+-------+-------+-------+-------+-------+-------+
* a | logical birth txg |
2008-11-20 20:01:55 +00:00
* +-------+-------+-------+-------+-------+-------+-------+-------+
* b | fill count |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* c | checksum[0] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* d | checksum[1] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* e | checksum[2] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* f | checksum[3] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
*
* Legend:
*
* vdev virtual device ID
* offset offset into virtual device
* LSIZE logical size
* PSIZE physical size (after compression)
* ASIZE allocated size (including RAID-Z parity and gang block headers)
* GRID RAID-Z layout information (reserved for future use)
* cksum checksum function
* comp compression function
* G gang block indicator
* B byteorder (endianness)
* D dedup
* X encryption (on version 30, which is not supported)
* E blkptr_t contains embedded data (see below)
2008-11-20 20:01:55 +00:00
* lvl level of indirection
* type DMU object type
* phys birth txg of block allocation; zero if same as logical birth txg
* log. birth transaction group in which the block was logically born
2008-11-20 20:01:55 +00:00
* fill count number of non-zero blocks under this bp
* checksum[4] 256-bit checksum of the data this bp describes
*/
/*
* "Embedded" blkptr_t's don't actually point to a block, instead they
* have a data payload embedded in the blkptr_t itself. See the comment
* in blkptr.c for more details.
*
* The blkptr_t is laid out as follows:
*
* 64 56 48 40 32 24 16 8 0
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 0 | payload |
* 1 | payload |
* 2 | payload |
* 3 | payload |
* 4 | payload |
* 5 | payload |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 6 |BDX|lvl| type | etype |E| comp| PSIZE| LSIZE |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 7 | payload |
* 8 | payload |
* 9 | payload |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* a | logical birth txg |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* b | payload |
* c | payload |
* d | payload |
* e | payload |
* f | payload |
* +-------+-------+-------+-------+-------+-------+-------+-------+
*
* Legend:
*
* payload contains the embedded data
* B (byteorder) byteorder (endianness)
* D (dedup) padding (set to zero)
* X encryption (set to zero; see above)
* E (embedded) set to one
* lvl indirection level
* type DMU object type
* etype how to interpret embedded data (BP_EMBEDDED_TYPE_*)
* comp compression function of payload
* PSIZE size of payload after compression, in bytes
* LSIZE logical size of payload, in bytes
* note that 25 bits is enough to store the largest
* "normal" BP's LSIZE (2^16 * 2^9) in bytes
* log. birth transaction group in which the block was logically born
*
* Note that LSIZE and PSIZE are stored in bytes, whereas for non-embedded
* bp's they are stored in units of SPA_MINBLOCKSHIFT.
* Generally, the generic BP_GET_*() macros can be used on embedded BP's.
* The B, D, X, lvl, type, and comp fields are stored the same as with normal
* BP's so the BP_SET_* macros can be used with them. etype, PSIZE, LSIZE must
* be set with the BPE_SET_* macros. BP_SET_EMBEDDED() should be called before
* other macros, as they assert that they are only used on BP's of the correct
* "embedded-ness".
*/
#define BPE_GET_ETYPE(bp) \
(ASSERT(BP_IS_EMBEDDED(bp)), \
BF64_GET((bp)->blk_prop, 40, 8))
#define BPE_SET_ETYPE(bp, t) do { \
ASSERT(BP_IS_EMBEDDED(bp)); \
BF64_SET((bp)->blk_prop, 40, 8, t); \
_NOTE(CONSTCOND) } while (0)
#define BPE_GET_LSIZE(bp) \
(ASSERT(BP_IS_EMBEDDED(bp)), \
BF64_GET_SB((bp)->blk_prop, 0, 25, 0, 1))
#define BPE_SET_LSIZE(bp, x) do { \
ASSERT(BP_IS_EMBEDDED(bp)); \
BF64_SET_SB((bp)->blk_prop, 0, 25, 0, 1, x); \
_NOTE(CONSTCOND) } while (0)
#define BPE_GET_PSIZE(bp) \
(ASSERT(BP_IS_EMBEDDED(bp)), \
BF64_GET_SB((bp)->blk_prop, 25, 7, 0, 1))
#define BPE_SET_PSIZE(bp, x) do { \
ASSERT(BP_IS_EMBEDDED(bp)); \
BF64_SET_SB((bp)->blk_prop, 25, 7, 0, 1, x); \
_NOTE(CONSTCOND) } while (0)
typedef enum bp_embedded_type {
BP_EMBEDDED_TYPE_DATA,
BP_EMBEDDED_TYPE_RESERVED, /* Reserved for an unintegrated feature. */
NUM_BP_EMBEDDED_TYPES = BP_EMBEDDED_TYPE_RESERVED
} bp_embedded_type_t;
#define BPE_NUM_WORDS 14
#define BPE_PAYLOAD_SIZE (BPE_NUM_WORDS * sizeof (uint64_t))
#define BPE_IS_PAYLOADWORD(bp, wp) \
((wp) != &(bp)->blk_prop && (wp) != &(bp)->blk_birth)
2008-11-20 20:01:55 +00:00
#define SPA_BLKPTRSHIFT 7 /* blkptr_t is 128 bytes */
#define SPA_DVAS_PER_BP 3 /* Number of DVAs in a bp */
/*
* A block is a hole when it has either 1) never been written to, or
* 2) is zero-filled. In both cases, ZFS can return all zeroes for all reads
* without physically allocating disk space. Holes are represented in the
* blkptr_t structure by zeroed blk_dva. Correct checking for holes is
* done through the BP_IS_HOLE macro. For holes, the logical size, level,
* DMU object type, and birth times are all also stored for holes that
* were written to at some point (i.e. were punched after having been filled).
*/
typedef struct blkptr {
dva_t blk_dva[SPA_DVAS_PER_BP]; /* Data Virtual Addresses */
uint64_t blk_prop; /* size, compression, type, etc */
uint64_t blk_pad[2]; /* Extra space for the future */
uint64_t blk_phys_birth; /* txg when block was allocated */
uint64_t blk_birth; /* transaction group at birth */
uint64_t blk_fill; /* fill count */
zio_cksum_t blk_cksum; /* 256-bit checksum */
} blkptr_t;
2008-11-20 20:01:55 +00:00
/*
* Macros to get and set fields in a bp or DVA.
*/
#define DVA_GET_ASIZE(dva) \
BF64_GET_SB((dva)->dva_word[0], 0, SPA_ASIZEBITS, SPA_MINBLOCKSHIFT, 0)
2008-11-20 20:01:55 +00:00
#define DVA_SET_ASIZE(dva, x) \
BF64_SET_SB((dva)->dva_word[0], 0, SPA_ASIZEBITS, \
SPA_MINBLOCKSHIFT, 0, x)
2008-11-20 20:01:55 +00:00
#define DVA_GET_GRID(dva) BF64_GET((dva)->dva_word[0], 24, 8)
#define DVA_SET_GRID(dva, x) BF64_SET((dva)->dva_word[0], 24, 8, x)
#define DVA_GET_VDEV(dva) BF64_GET((dva)->dva_word[0], 32, 32)
#define DVA_SET_VDEV(dva, x) BF64_SET((dva)->dva_word[0], 32, 32, x)
#define DVA_GET_OFFSET(dva) \
BF64_GET_SB((dva)->dva_word[1], 0, 63, SPA_MINBLOCKSHIFT, 0)
#define DVA_SET_OFFSET(dva, x) \
BF64_SET_SB((dva)->dva_word[1], 0, 63, SPA_MINBLOCKSHIFT, 0, x)
#define DVA_GET_GANG(dva) BF64_GET((dva)->dva_word[1], 63, 1)
#define DVA_SET_GANG(dva, x) BF64_SET((dva)->dva_word[1], 63, 1, x)
#define BP_GET_LSIZE(bp) \
(BP_IS_EMBEDDED(bp) ? \
(BPE_GET_ETYPE(bp) == BP_EMBEDDED_TYPE_DATA ? BPE_GET_LSIZE(bp) : 0): \
BF64_GET_SB((bp)->blk_prop, 0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1))
#define BP_SET_LSIZE(bp, x) do { \
ASSERT(!BP_IS_EMBEDDED(bp)); \
BF64_SET_SB((bp)->blk_prop, \
0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1, x); \
_NOTE(CONSTCOND) } while (0)
2008-11-20 20:01:55 +00:00
#define BP_GET_PSIZE(bp) \
(BP_IS_EMBEDDED(bp) ? 0 : \
BF64_GET_SB((bp)->blk_prop, 16, SPA_PSIZEBITS, SPA_MINBLOCKSHIFT, 1))
#define BP_SET_PSIZE(bp, x) do { \
ASSERT(!BP_IS_EMBEDDED(bp)); \
BF64_SET_SB((bp)->blk_prop, \
16, SPA_PSIZEBITS, SPA_MINBLOCKSHIFT, 1, x); \
_NOTE(CONSTCOND) } while (0)
#define BP_GET_COMPRESS(bp) BF64_GET((bp)->blk_prop, 32, 7)
#define BP_SET_COMPRESS(bp, x) BF64_SET((bp)->blk_prop, 32, 7, x)
2008-11-20 20:01:55 +00:00
#define BP_IS_EMBEDDED(bp) BF64_GET((bp)->blk_prop, 39, 1)
#define BP_SET_EMBEDDED(bp, x) BF64_SET((bp)->blk_prop, 39, 1, x)
#define BP_GET_CHECKSUM(bp) \
(BP_IS_EMBEDDED(bp) ? ZIO_CHECKSUM_OFF : \
BF64_GET((bp)->blk_prop, 40, 8))
#define BP_SET_CHECKSUM(bp, x) do { \
ASSERT(!BP_IS_EMBEDDED(bp)); \
BF64_SET((bp)->blk_prop, 40, 8, x); \
_NOTE(CONSTCOND) } while (0)
2008-11-20 20:01:55 +00:00
#define BP_GET_TYPE(bp) BF64_GET((bp)->blk_prop, 48, 8)
#define BP_SET_TYPE(bp, x) BF64_SET((bp)->blk_prop, 48, 8, x)
2008-11-20 20:01:55 +00:00
#define BP_GET_LEVEL(bp) BF64_GET((bp)->blk_prop, 56, 5)
#define BP_SET_LEVEL(bp, x) BF64_SET((bp)->blk_prop, 56, 5, x)
2008-11-20 20:01:55 +00:00
#define BP_GET_DEDUP(bp) BF64_GET((bp)->blk_prop, 62, 1)
#define BP_SET_DEDUP(bp, x) BF64_SET((bp)->blk_prop, 62, 1, x)
#define BP_GET_BYTEORDER(bp) BF64_GET((bp)->blk_prop, 63, 1)
#define BP_SET_BYTEORDER(bp, x) BF64_SET((bp)->blk_prop, 63, 1, x)
#define BP_PHYSICAL_BIRTH(bp) \
(BP_IS_EMBEDDED(bp) ? 0 : \
(bp)->blk_phys_birth ? (bp)->blk_phys_birth : (bp)->blk_birth)
#define BP_SET_BIRTH(bp, logical, physical) \
{ \
ASSERT(!BP_IS_EMBEDDED(bp)); \
(bp)->blk_birth = (logical); \
(bp)->blk_phys_birth = ((logical) == (physical) ? 0 : (physical)); \
}
2008-11-20 20:01:55 +00:00
#define BP_GET_FILL(bp) (BP_IS_EMBEDDED(bp) ? 1 : (bp)->blk_fill)
2008-11-20 20:01:55 +00:00
#define BP_GET_ASIZE(bp) \
(BP_IS_EMBEDDED(bp) ? 0 : \
DVA_GET_ASIZE(&(bp)->blk_dva[0]) + \
DVA_GET_ASIZE(&(bp)->blk_dva[1]) + \
DVA_GET_ASIZE(&(bp)->blk_dva[2]))
2008-11-20 20:01:55 +00:00
#define BP_GET_UCSIZE(bp) \
((BP_GET_LEVEL(bp) > 0 || DMU_OT_IS_METADATA(BP_GET_TYPE(bp))) ? \
BP_GET_PSIZE(bp) : BP_GET_LSIZE(bp))
2008-11-20 20:01:55 +00:00
#define BP_GET_NDVAS(bp) \
(BP_IS_EMBEDDED(bp) ? 0 : \
!!DVA_GET_ASIZE(&(bp)->blk_dva[0]) + \
2008-11-20 20:01:55 +00:00
!!DVA_GET_ASIZE(&(bp)->blk_dva[1]) + \
!!DVA_GET_ASIZE(&(bp)->blk_dva[2]))
#define BP_COUNT_GANG(bp) \
(BP_IS_EMBEDDED(bp) ? 0 : \
2008-11-20 20:01:55 +00:00
(DVA_GET_GANG(&(bp)->blk_dva[0]) + \
DVA_GET_GANG(&(bp)->blk_dva[1]) + \
DVA_GET_GANG(&(bp)->blk_dva[2])))
2008-11-20 20:01:55 +00:00
#define DVA_EQUAL(dva1, dva2) \
((dva1)->dva_word[1] == (dva2)->dva_word[1] && \
(dva1)->dva_word[0] == (dva2)->dva_word[0])
#define BP_EQUAL(bp1, bp2) \
(BP_PHYSICAL_BIRTH(bp1) == BP_PHYSICAL_BIRTH(bp2) && \
(bp1)->blk_birth == (bp2)->blk_birth && \
DVA_EQUAL(&(bp1)->blk_dva[0], &(bp2)->blk_dva[0]) && \
DVA_EQUAL(&(bp1)->blk_dva[1], &(bp2)->blk_dva[1]) && \
DVA_EQUAL(&(bp1)->blk_dva[2], &(bp2)->blk_dva[2]))
2008-11-20 20:01:55 +00:00
#define DVA_IS_VALID(dva) (DVA_GET_ASIZE(dva) != 0)
#define BP_IDENTITY(bp) (ASSERT(!BP_IS_EMBEDDED(bp)), &(bp)->blk_dva[0])
#define BP_IS_GANG(bp) \
(BP_IS_EMBEDDED(bp) ? B_FALSE : DVA_GET_GANG(BP_IDENTITY(bp)))
#define DVA_IS_EMPTY(dva) ((dva)->dva_word[0] == 0ULL && \
(dva)->dva_word[1] == 0ULL)
#define BP_IS_HOLE(bp) \
(!BP_IS_EMBEDDED(bp) && DVA_IS_EMPTY(BP_IDENTITY(bp)))
/* BP_IS_RAIDZ(bp) assumes no block compression */
#define BP_IS_RAIDZ(bp) (DVA_GET_ASIZE(&(bp)->blk_dva[0]) > \
BP_GET_PSIZE(bp))
2008-11-20 20:01:55 +00:00
#define BP_ZERO(bp) \
2008-11-20 20:01:55 +00:00
{ \
(bp)->blk_dva[0].dva_word[0] = 0; \
(bp)->blk_dva[0].dva_word[1] = 0; \
(bp)->blk_dva[1].dva_word[0] = 0; \
(bp)->blk_dva[1].dva_word[1] = 0; \
(bp)->blk_dva[2].dva_word[0] = 0; \
(bp)->blk_dva[2].dva_word[1] = 0; \
(bp)->blk_prop = 0; \
(bp)->blk_pad[0] = 0; \
(bp)->blk_pad[1] = 0; \
(bp)->blk_phys_birth = 0; \
(bp)->blk_birth = 0; \
2008-11-20 20:01:55 +00:00
(bp)->blk_fill = 0; \
ZIO_SET_CHECKSUM(&(bp)->blk_cksum, 0, 0, 0, 0); \
}
#ifdef _BIG_ENDIAN
#define ZFS_HOST_BYTEORDER (0ULL)
#else
#define ZFS_HOST_BYTEORDER (1ULL)
2008-11-20 20:01:55 +00:00
#endif
#define BP_SHOULD_BYTESWAP(bp) (BP_GET_BYTEORDER(bp) != ZFS_HOST_BYTEORDER)
#define BP_SPRINTF_LEN 320
/*
* This macro allows code sharing between zfs, libzpool, and mdb.
* 'func' is either snprintf() or mdb_snprintf().
* 'ws' (whitespace) can be ' ' for single-line format, '\n' for multi-line.
*/
#define SNPRINTF_BLKPTR(func, ws, buf, size, bp, type, checksum, compress) \
{ \
static const char *copyname[] = \
{ "zero", "single", "double", "triple" }; \
int len = 0; \
int copies = 0; \
int d; \
\
if (bp == NULL) { \
len += func(buf + len, size - len, "<NULL>"); \
} else if (BP_IS_HOLE(bp)) { \
len += func(buf + len, size - len, \
"HOLE [L%llu %s] " \
"size=%llxL birth=%lluL", \
(u_longlong_t)BP_GET_LEVEL(bp), \
type, \
(u_longlong_t)BP_GET_LSIZE(bp), \
(u_longlong_t)bp->blk_birth); \
} else if (BP_IS_EMBEDDED(bp)) { \
len = func(buf + len, size - len, \
"EMBEDDED [L%llu %s] et=%u %s " \
"size=%llxL/%llxP birth=%lluL", \
(u_longlong_t)BP_GET_LEVEL(bp), \
type, \
(int)BPE_GET_ETYPE(bp), \
compress, \
(u_longlong_t)BPE_GET_LSIZE(bp), \
(u_longlong_t)BPE_GET_PSIZE(bp), \
(u_longlong_t)bp->blk_birth); \
} else { \
for (d = 0; d < BP_GET_NDVAS(bp); d++) { \
const dva_t *dva = &bp->blk_dva[d]; \
if (DVA_IS_VALID(dva)) \
copies++; \
len += func(buf + len, size - len, \
"DVA[%d]=<%llu:%llx:%llx>%c", d, \
(u_longlong_t)DVA_GET_VDEV(dva), \
(u_longlong_t)DVA_GET_OFFSET(dva), \
(u_longlong_t)DVA_GET_ASIZE(dva), \
ws); \
} \
if (BP_IS_GANG(bp) && \
DVA_GET_ASIZE(&bp->blk_dva[2]) <= \
DVA_GET_ASIZE(&bp->blk_dva[1]) / 2) \
copies--; \
len += func(buf + len, size - len, \
"[L%llu %s] %s %s %s %s %s %s%c" \
"size=%llxL/%llxP birth=%lluL/%lluP fill=%llu%c" \
"cksum=%llx:%llx:%llx:%llx", \
(u_longlong_t)BP_GET_LEVEL(bp), \
type, \
checksum, \
compress, \
BP_GET_BYTEORDER(bp) == 0 ? "BE" : "LE", \
BP_IS_GANG(bp) ? "gang" : "contiguous", \
BP_GET_DEDUP(bp) ? "dedup" : "unique", \
copyname[copies], \
ws, \
(u_longlong_t)BP_GET_LSIZE(bp), \
(u_longlong_t)BP_GET_PSIZE(bp), \
(u_longlong_t)bp->blk_birth, \
(u_longlong_t)BP_PHYSICAL_BIRTH(bp), \
(u_longlong_t)BP_GET_FILL(bp), \
ws, \
(u_longlong_t)bp->blk_cksum.zc_word[0], \
(u_longlong_t)bp->blk_cksum.zc_word[1], \
(u_longlong_t)bp->blk_cksum.zc_word[2], \
(u_longlong_t)bp->blk_cksum.zc_word[3]); \
} \
ASSERT(len < size); \
}
2008-11-20 20:01:55 +00:00
#include <sys/dmu.h>
#define BP_GET_BUFC_TYPE(bp) \
(((BP_GET_LEVEL(bp) > 0) || (DMU_OT_IS_METADATA(BP_GET_TYPE(bp)))) ? \
ARC_BUFC_METADATA : ARC_BUFC_DATA)
typedef enum spa_import_type {
SPA_IMPORT_EXISTING,
SPA_IMPORT_ASSEMBLE
} spa_import_type_t;
2008-11-20 20:01:55 +00:00
/* state manipulation functions */
extern int spa_open(const char *pool, spa_t **, void *tag);
extern int spa_open_rewind(const char *pool, spa_t **, void *tag,
nvlist_t *policy, nvlist_t **config);
extern int spa_get_stats(const char *pool, nvlist_t **config, char *altroot,
size_t buflen);
2008-11-20 20:01:55 +00:00
extern int spa_create(const char *pool, nvlist_t *config, nvlist_t *props,
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
nvlist_t *zplprops);
extern int spa_import_rootpool(char *devpath, char *devid);
extern int spa_import(char *pool, nvlist_t *config, nvlist_t *props,
uint64_t flags);
2008-11-20 20:01:55 +00:00
extern nvlist_t *spa_tryimport(nvlist_t *tryconfig);
extern int spa_destroy(char *pool);
2009-01-15 21:59:39 +00:00
extern int spa_export(char *pool, nvlist_t **oldconfig, boolean_t force,
boolean_t hardforce);
2008-11-20 20:01:55 +00:00
extern int spa_reset(char *pool);
extern void spa_async_request(spa_t *spa, int flag);
extern void spa_async_unrequest(spa_t *spa, int flag);
2008-11-20 20:01:55 +00:00
extern void spa_async_suspend(spa_t *spa);
extern void spa_async_resume(spa_t *spa);
extern spa_t *spa_inject_addref(char *pool);
extern void spa_inject_delref(spa_t *spa);
extern void spa_scan_stat_init(spa_t *spa);
extern int spa_scan_get_stats(spa_t *spa, pool_scan_stat_t *ps);
2008-11-20 20:01:55 +00:00
#define SPA_ASYNC_CONFIG_UPDATE 0x01
#define SPA_ASYNC_REMOVE 0x02
#define SPA_ASYNC_PROBE 0x04
#define SPA_ASYNC_RESILVER_DONE 0x08
#define SPA_ASYNC_RESILVER 0x10
2009-07-02 22:44:48 +00:00
#define SPA_ASYNC_AUTOEXPAND 0x20
#define SPA_ASYNC_REMOVE_DONE 0x40
#define SPA_ASYNC_REMOVE_STOP 0x80
/*
* Controls the behavior of spa_vdev_remove().
*/
#define SPA_REMOVE_UNSPARE 0x01
#define SPA_REMOVE_DONE 0x02
2008-11-20 20:01:55 +00:00
/* device manipulation */
extern int spa_vdev_add(spa_t *spa, nvlist_t *nvroot);
extern int spa_vdev_attach(spa_t *spa, uint64_t guid, nvlist_t *nvroot,
int replacing);
2009-01-15 21:59:39 +00:00
extern int spa_vdev_detach(spa_t *spa, uint64_t guid, uint64_t pguid,
int replace_done);
2008-11-20 20:01:55 +00:00
extern int spa_vdev_remove(spa_t *spa, uint64_t guid, boolean_t unspare);
extern boolean_t spa_vdev_remove_active(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern int spa_vdev_setpath(spa_t *spa, uint64_t guid, const char *newpath);
2009-07-02 22:44:48 +00:00
extern int spa_vdev_setfru(spa_t *spa, uint64_t guid, const char *newfru);
extern int spa_vdev_split_mirror(spa_t *spa, char *newname, nvlist_t *config,
nvlist_t *props, boolean_t exp);
2008-11-20 20:01:55 +00:00
/* spare state (which is global across all pools) */
extern void spa_spare_add(vdev_t *vd);
extern void spa_spare_remove(vdev_t *vd);
extern boolean_t spa_spare_exists(uint64_t guid, uint64_t *pool, int *refcnt);
2008-11-20 20:01:55 +00:00
extern void spa_spare_activate(vdev_t *vd);
/* L2ARC state (which is global across all pools) */
extern void spa_l2cache_add(vdev_t *vd);
extern void spa_l2cache_remove(vdev_t *vd);
extern boolean_t spa_l2cache_exists(uint64_t guid, uint64_t *pool);
extern void spa_l2cache_activate(vdev_t *vd);
extern void spa_l2cache_drop(spa_t *spa);
/* scanning */
extern int spa_scan(spa_t *spa, pool_scan_func_t func);
extern int spa_scan_stop(spa_t *spa);
2008-11-20 20:01:55 +00:00
/* spa syncing */
extern void spa_sync(spa_t *spa, uint64_t txg); /* only for DMU use */
extern void spa_sync_allpools(void);
extern int zfs_sync_pass_deferred_free;
/* spa namespace global mutex */
extern kmutex_t spa_namespace_lock;
2008-11-20 20:01:55 +00:00
/*
* SPA configuration functions in spa_config.c
*/
#define SPA_CONFIG_UPDATE_POOL 0
#define SPA_CONFIG_UPDATE_VDEVS 1
extern void spa_config_sync(spa_t *, boolean_t, boolean_t);
2008-11-20 20:01:55 +00:00
extern void spa_config_load(void);
extern nvlist_t *spa_all_configs(uint64_t *);
extern void spa_config_set(spa_t *spa, nvlist_t *config);
extern nvlist_t *spa_config_generate(spa_t *spa, vdev_t *vd, uint64_t txg,
int getstats);
extern void spa_config_update(spa_t *spa, int what);
/*
* Miscellaneous SPA routines in spa_misc.c
*/
/* Namespace manipulation */
extern spa_t *spa_lookup(const char *name);
extern spa_t *spa_add(const char *name, nvlist_t *config, const char *altroot);
2008-11-20 20:01:55 +00:00
extern void spa_remove(spa_t *spa);
extern spa_t *spa_next(spa_t *prev);
/* Refcount functions */
extern void spa_open_ref(spa_t *spa, void *tag);
extern void spa_close(spa_t *spa, void *tag);
extern void spa_async_close(spa_t *spa, void *tag);
2008-11-20 20:01:55 +00:00
extern boolean_t spa_refcount_zero(spa_t *spa);
#define SCL_NONE 0x00
#define SCL_CONFIG 0x01
#define SCL_STATE 0x02
#define SCL_L2ARC 0x04 /* hack until L2ARC 2.0 */
#define SCL_ALLOC 0x08
#define SCL_ZIO 0x10
#define SCL_FREE 0x20
#define SCL_VDEV 0x40
#define SCL_LOCKS 7
#define SCL_ALL ((1 << SCL_LOCKS) - 1)
#define SCL_STATE_ALL (SCL_STATE | SCL_L2ARC | SCL_ZIO)
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
/* Historical pool statistics */
typedef struct spa_stats_history {
kmutex_t lock;
uint64_t count;
uint64_t size;
kstat_t *kstat;
void *private;
list_t list;
} spa_stats_history_t;
typedef struct spa_stats {
spa_stats_history_t read_history;
spa_stats_history_t txg_history;
spa_stats_history_t tx_assign_histogram;
spa_stats_history_t io_history;
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
} spa_stats_t;
typedef enum txg_state {
TXG_STATE_BIRTH = 0,
TXG_STATE_OPEN = 1,
TXG_STATE_QUIESCED = 2,
TXG_STATE_WAIT_FOR_SYNC = 3,
TXG_STATE_SYNCED = 4,
TXG_STATE_COMMITTED = 5,
} txg_state_t;
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
extern void spa_stats_init(spa_t *spa);
extern void spa_stats_destroy(spa_t *spa);
extern void spa_read_history_add(spa_t *spa, const zbookmark_phys_t *zb,
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
uint32_t aflags);
extern void spa_txg_history_add(spa_t *spa, uint64_t txg, hrtime_t birth_time);
extern int spa_txg_history_set(spa_t *spa, uint64_t txg,
txg_state_t completed_state, hrtime_t completed_time);
extern int spa_txg_history_set_io(spa_t *spa, uint64_t txg, uint64_t nread,
uint64_t nwritten, uint64_t reads, uint64_t writes, uint64_t ndirty);
extern void spa_tx_assign_add_nsecs(spa_t *spa, uint64_t nsecs);
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
/* Pool configuration locks */
extern int spa_config_tryenter(spa_t *spa, int locks, void *tag, krw_t rw);
extern void spa_config_enter(spa_t *spa, int locks, void *tag, krw_t rw);
extern void spa_config_exit(spa_t *spa, int locks, void *tag);
extern int spa_config_held(spa_t *spa, int locks, krw_t rw);
2008-11-20 20:01:55 +00:00
/* Pool vdev add/remove lock */
extern uint64_t spa_vdev_enter(spa_t *spa);
extern uint64_t spa_vdev_config_enter(spa_t *spa);
extern void spa_vdev_config_exit(spa_t *spa, vdev_t *vd, uint64_t txg,
int error, char *tag);
2008-11-20 20:01:55 +00:00
extern int spa_vdev_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error);
/* Pool vdev state change lock */
extern void spa_vdev_state_enter(spa_t *spa, int oplock);
extern int spa_vdev_state_exit(spa_t *spa, vdev_t *vd, int error);
/* Log state */
typedef enum spa_log_state {
SPA_LOG_UNKNOWN = 0, /* unknown log state */
SPA_LOG_MISSING, /* missing log(s) */
SPA_LOG_CLEAR, /* clear the log(s) */
SPA_LOG_GOOD, /* log(s) are good */
} spa_log_state_t;
extern spa_log_state_t spa_get_log_state(spa_t *spa);
extern void spa_set_log_state(spa_t *spa, spa_log_state_t state);
extern int spa_offline_log(spa_t *spa);
/* Log claim callback */
extern void spa_claim_notify(zio_t *zio);
extern void spa_deadman(void *);
2008-11-20 20:01:55 +00:00
/* Accessor functions */
extern boolean_t spa_shutting_down(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern struct dsl_pool *spa_get_dsl(spa_t *spa);
extern boolean_t spa_is_initializing(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern blkptr_t *spa_get_rootblkptr(spa_t *spa);
extern void spa_set_rootblkptr(spa_t *spa, const blkptr_t *bp);
extern void spa_altroot(spa_t *, char *, size_t);
extern int spa_sync_pass(spa_t *spa);
extern char *spa_name(spa_t *spa);
extern uint64_t spa_guid(spa_t *spa);
extern uint64_t spa_load_guid(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern uint64_t spa_last_synced_txg(spa_t *spa);
extern uint64_t spa_first_txg(spa_t *spa);
extern uint64_t spa_syncing_txg(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern uint64_t spa_version(spa_t *spa);
extern pool_state_t spa_state(spa_t *spa);
extern spa_load_state_t spa_load_state(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern uint64_t spa_freeze_txg(spa_t *spa);
extern uint64_t spa_get_asize(spa_t *spa, uint64_t lsize);
extern uint64_t spa_get_dspace(spa_t *spa);
extern uint64_t spa_get_slop_space(spa_t *spa);
extern void spa_update_dspace(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern uint64_t spa_version(spa_t *spa);
extern boolean_t spa_deflate(spa_t *spa);
extern metaslab_class_t *spa_normal_class(spa_t *spa);
extern metaslab_class_t *spa_log_class(spa_t *spa);
extern void spa_evicting_os_register(spa_t *, objset_t *os);
extern void spa_evicting_os_deregister(spa_t *, objset_t *os);
extern void spa_evicting_os_wait(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern int spa_max_replication(spa_t *spa);
extern int spa_prev_software_version(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern uint8_t spa_get_failmode(spa_t *spa);
extern boolean_t spa_suspended(spa_t *spa);
extern uint64_t spa_bootfs(spa_t *spa);
extern uint64_t spa_delegation(spa_t *spa);
extern objset_t *spa_meta_objset(spa_t *spa);
extern uint64_t spa_deadman_synctime(spa_t *spa);
2008-11-20 20:01:55 +00:00
/* Miscellaneous support routines */
extern void spa_activate_mos_feature(spa_t *spa, const char *feature,
dmu_tx_t *tx);
extern void spa_deactivate_mos_feature(spa_t *spa, const char *feature);
2008-11-20 20:01:55 +00:00
extern int spa_rename(const char *oldname, const char *newname);
extern spa_t *spa_by_guid(uint64_t pool_guid, uint64_t device_guid);
2008-11-20 20:01:55 +00:00
extern boolean_t spa_guid_exists(uint64_t pool_guid, uint64_t device_guid);
extern char *spa_strdup(const char *);
extern void spa_strfree(char *);
extern uint64_t spa_get_random(uint64_t range);
extern uint64_t spa_generate_guid(spa_t *spa);
extern void snprintf_blkptr(char *buf, size_t buflen, const blkptr_t *bp);
2008-11-20 20:01:55 +00:00
extern void spa_freeze(spa_t *spa);
extern int spa_change_guid(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern void spa_upgrade(spa_t *spa, uint64_t version);
extern void spa_evict_all(void);
extern vdev_t *spa_lookup_by_guid(spa_t *spa, uint64_t guid,
boolean_t l2cache);
2008-11-20 20:01:55 +00:00
extern boolean_t spa_has_spare(spa_t *, uint64_t guid);
extern uint64_t dva_get_dsize_sync(spa_t *spa, const dva_t *dva);
extern uint64_t bp_get_dsize_sync(spa_t *spa, const blkptr_t *bp);
extern uint64_t bp_get_dsize(spa_t *spa, const blkptr_t *bp);
2008-11-20 20:01:55 +00:00
extern boolean_t spa_has_slogs(spa_t *spa);
extern boolean_t spa_is_root(spa_t *spa);
2009-01-15 21:59:39 +00:00
extern boolean_t spa_writeable(spa_t *spa);
extern boolean_t spa_has_pending_synctask(spa_t *spa);
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
extern int spa_maxblocksize(spa_t *spa);
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
extern int spa_maxdnodesize(spa_t *spa);
extern void zfs_blkptr_verify(spa_t *spa, const blkptr_t *bp);
2009-01-15 21:59:39 +00:00
extern int spa_mode(spa_t *spa);
extern uint64_t strtonum(const char *str, char **nptr);
2008-11-20 20:01:55 +00:00
extern char *spa_his_ievent_table[];
extern void spa_history_create_obj(spa_t *spa, dmu_tx_t *tx);
extern int spa_history_get(spa_t *spa, uint64_t *offset, uint64_t *len_read,
char *his_buf);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
extern int spa_history_log(spa_t *spa, const char *his_buf);
extern int spa_history_log_nvl(spa_t *spa, nvlist_t *nvl);
extern void spa_history_log_version(spa_t *spa, const char *operation);
extern void spa_history_log_internal(spa_t *spa, const char *operation,
dmu_tx_t *tx, const char *fmt, ...);
extern void spa_history_log_internal_ds(struct dsl_dataset *ds, const char *op,
dmu_tx_t *tx, const char *fmt, ...);
extern void spa_history_log_internal_dd(dsl_dir_t *dd, const char *operation,
dmu_tx_t *tx, const char *fmt, ...);
2008-11-20 20:01:55 +00:00
/* error handling */
struct zbookmark_phys;
extern void spa_log_error(spa_t *spa, zio_t *zio);
2008-11-20 20:01:55 +00:00
extern void zfs_ereport_post(const char *class, spa_t *spa, vdev_t *vd,
zio_t *zio, uint64_t stateoroffset, uint64_t length);
2008-11-20 20:01:55 +00:00
extern void zfs_post_remove(spa_t *spa, vdev_t *vd);
extern void zfs_post_state_change(spa_t *spa, vdev_t *vd);
2008-11-20 20:01:55 +00:00
extern void zfs_post_autoreplace(spa_t *spa, vdev_t *vd);
extern uint64_t spa_get_errlog_size(spa_t *spa);
extern int spa_get_errlog(spa_t *spa, void *uaddr, size_t *count);
extern void spa_errlog_rotate(spa_t *spa);
extern void spa_errlog_drain(spa_t *spa);
extern void spa_errlog_sync(spa_t *spa, uint64_t txg);
extern void spa_get_errlists(spa_t *spa, avl_tree_t *last, avl_tree_t *scrub);
/* vdev cache */
extern void vdev_cache_stat_init(void);
extern void vdev_cache_stat_fini(void);
/* Initialization and termination */
extern void spa_init(int flags);
extern void spa_fini(void);
extern void spa_boot_init(void);
2008-11-20 20:01:55 +00:00
/* properties */
extern int spa_prop_set(spa_t *spa, nvlist_t *nvp);
extern int spa_prop_get(spa_t *spa, nvlist_t **nvp);
extern void spa_prop_clear_bootfs(spa_t *spa, uint64_t obj, dmu_tx_t *tx);
2009-02-18 20:51:31 +00:00
extern void spa_configfile_set(spa_t *, nvlist_t *, boolean_t);
2008-11-20 20:01:55 +00:00
/* asynchronous event notification */
extern void spa_event_notify(spa_t *spa, vdev_t *vdev, const char *name);
#ifdef ZFS_DEBUG
#define dprintf_bp(bp, fmt, ...) do { \
if (zfs_flags & ZFS_DEBUG_DPRINTF) { \
char *__blkbuf = kmem_alloc(BP_SPRINTF_LEN, KM_SLEEP); \
snprintf_blkptr(__blkbuf, BP_SPRINTF_LEN, (bp)); \
dprintf(fmt " %s\n", __VA_ARGS__, __blkbuf); \
kmem_free(__blkbuf, BP_SPRINTF_LEN); \
2008-11-20 20:01:55 +00:00
} \
_NOTE(CONSTCOND) } while (0)
#else
#define dprintf_bp(bp, fmt, ...)
#endif
extern boolean_t spa_debug_enabled(spa_t *spa);
#define spa_dbgmsg(spa, ...) \
{ \
if (spa_debug_enabled(spa)) \
zfs_dbgmsg(__VA_ARGS__); \
}
2009-01-15 21:59:39 +00:00
extern int spa_mode_global; /* mode, e.g. FREAD | FWRITE */
2008-11-20 20:01:55 +00:00
#ifdef __cplusplus
}
#endif
#endif /* _SYS_SPA_H */