zfs/include/sys/spa.h

1141 lines
43 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011, 2018 by Delphix. All rights reserved.
* Copyright 2011 Nexenta Systems, Inc. All rights reserved.
* Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
OpenZFS 4185 - add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-R Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Approved by: Garrett D'Amore <garrett@damore.org> Ported by: Tony Hutter <hutter2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/4185 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee Porting Notes: This code is ported on top of the Illumos Crypto Framework code: https://github.com/zfsonlinux/zfs/pull/4329/commits/b5e030c8dbb9cd393d313571dee4756fbba8c22d The list of porting changes includes: - Copied module/icp/include/sha2/sha2.h directly from illumos - Removed from module/icp/algs/sha2/sha2.c: #pragma inline(SHA256Init, SHA384Init, SHA512Init) - Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since it now takes in an extra parameter. - Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c - Added skein & edonr to libicp/Makefile.am - Added sha512.S. It was generated from sha512-x86_64.pl in Illumos. - Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument. - In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section to not #include the non-existant endian.h. - In skein_test.c, renane NULL to 0 in "no test vector" array entries to get around a compiler warning. - Fixup test files: - Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>, - Remove <note.h> and define NOTE() as NOP. - Define u_longlong_t - Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p" - Rename NULL to 0 in "no test vector" array entries to get around a compiler warning. - Remove "for isa in $($ISAINFO); do" stuff - Add/update Makefiles - Add some userspace headers like stdio.h/stdlib.h in places of sys/types.h. - EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules. - Update scripts/zfs2zol-patch.sed - include <sys/sha2.h> in sha2_impl.h - Add sha2.h to include/sys/Makefile.am - Add skein and edonr dirs to icp Makefile - Add new checksums to zpool_get.cfg - Move checksum switch block from zfs_secpolicy_setprop() to zfs_check_settable() - Fix -Wuninitialized error in edonr_byteorder.h on PPC - Fix stack frame size errors on ARM32 - Don't unroll loops in Skein on 32-bit to save stack space - Add memory barriers in sha2.c on 32-bit to save stack space - Add filetest_001_pos.ksh checksum sanity test - Add option to write psudorandom data in file_write utility
2016-06-15 22:47:05 +00:00
* Copyright 2013 Saso Kiselkov. All rights reserved.
* Copyright (c) 2014 Integros [integros.com]
* Copyright 2017 Joyent, Inc.
* Copyright (c) 2017 Datto Inc.
* Copyright (c) 2017, Intel Corporation.
2008-11-20 20:01:55 +00:00
*/
#ifndef _SYS_SPA_H
#define _SYS_SPA_H
#include <sys/avl.h>
#include <sys/zfs_context.h>
#include <sys/kstat.h>
2008-11-20 20:01:55 +00:00
#include <sys/nvpair.h>
#include <sys/sysmacros.h>
#include <sys/types.h>
#include <sys/fs/zfs.h>
#include <sys/spa_checksum.h>
#include <sys/dmu.h>
2008-11-20 20:01:55 +00:00
#ifdef __cplusplus
extern "C" {
#endif
/*
* Forward references that lots of things need.
*/
typedef struct spa spa_t;
typedef struct vdev vdev_t;
typedef struct metaslab metaslab_t;
typedef struct metaslab_group metaslab_group_t;
typedef struct metaslab_class metaslab_class_t;
typedef struct zio zio_t;
2008-11-20 20:01:55 +00:00
typedef struct zilog zilog_t;
typedef struct spa_aux_vdev spa_aux_vdev_t;
typedef struct ddt ddt_t;
typedef struct ddt_entry ddt_entry_t;
typedef struct zbookmark_phys zbookmark_phys_t;
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
2008-11-20 20:01:55 +00:00
struct dsl_pool;
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
struct dsl_dataset;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
struct dsl_crypto_params;
2008-11-20 20:01:55 +00:00
/*
* General-purpose 32-bit and 64-bit bitfield encodings.
*/
#define BF32_DECODE(x, low, len) P2PHASE((x) >> (low), 1U << (len))
#define BF64_DECODE(x, low, len) P2PHASE((x) >> (low), 1ULL << (len))
#define BF32_ENCODE(x, low, len) (P2PHASE((x), 1U << (len)) << (low))
#define BF64_ENCODE(x, low, len) (P2PHASE((x), 1ULL << (len)) << (low))
#define BF32_GET(x, low, len) BF32_DECODE(x, low, len)
#define BF64_GET(x, low, len) BF64_DECODE(x, low, len)
#define BF32_SET(x, low, len, val) do { \
ASSERT3U(val, <, 1U << (len)); \
ASSERT3U(low + len, <=, 32); \
(x) ^= BF32_ENCODE((x >> low) ^ (val), low, len); \
_NOTE(CONSTCOND) } while (0)
#define BF64_SET(x, low, len, val) do { \
ASSERT3U(val, <, 1ULL << (len)); \
ASSERT3U(low + len, <=, 64); \
((x) ^= BF64_ENCODE((x >> low) ^ (val), low, len)); \
_NOTE(CONSTCOND) } while (0)
2008-11-20 20:01:55 +00:00
#define BF32_GET_SB(x, low, len, shift, bias) \
((BF32_GET(x, low, len) + (bias)) << (shift))
#define BF64_GET_SB(x, low, len, shift, bias) \
((BF64_GET(x, low, len) + (bias)) << (shift))
#define BF32_SET_SB(x, low, len, shift, bias, val) do { \
ASSERT(IS_P2ALIGNED(val, 1U << shift)); \
ASSERT3S((val) >> (shift), >=, bias); \
BF32_SET(x, low, len, ((val) >> (shift)) - (bias)); \
_NOTE(CONSTCOND) } while (0)
#define BF64_SET_SB(x, low, len, shift, bias, val) do { \
ASSERT(IS_P2ALIGNED(val, 1ULL << shift)); \
ASSERT3S((val) >> (shift), >=, bias); \
BF64_SET(x, low, len, ((val) >> (shift)) - (bias)); \
_NOTE(CONSTCOND) } while (0)
2008-11-20 20:01:55 +00:00
/*
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
* We currently support block sizes from 512 bytes to 16MB.
* The benefits of larger blocks, and thus larger IO, need to be weighed
* against the cost of COWing a giant block to modify one byte, and the
* large latency of reading or writing a large block.
*
* Note that although blocks up to 16MB are supported, the recordsize
* property can not be set larger than zfs_max_recordsize (default 1MB).
* See the comment near zfs_max_recordsize in dsl_dataset.c for details.
*
* Note that although the LSIZE field of the blkptr_t can store sizes up
* to 32MB, the dnode's dn_datablkszsec can only store sizes up to
* 32MB - 512 bytes. Therefore, we limit SPA_MAXBLOCKSIZE to 16MB.
2008-11-20 20:01:55 +00:00
*/
#define SPA_MINBLOCKSHIFT 9
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
#define SPA_OLD_MAXBLOCKSHIFT 17
#define SPA_MAXBLOCKSHIFT 24
2008-11-20 20:01:55 +00:00
#define SPA_MINBLOCKSIZE (1ULL << SPA_MINBLOCKSHIFT)
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
#define SPA_OLD_MAXBLOCKSIZE (1ULL << SPA_OLD_MAXBLOCKSHIFT)
2008-11-20 20:01:55 +00:00
#define SPA_MAXBLOCKSIZE (1ULL << SPA_MAXBLOCKSHIFT)
/*
* Alignment Shift (ashift) is an immutable, internal top-level vdev property
* which can only be set at vdev creation time. Physical writes are always done
* according to it, which makes 2^ashift the smallest possible IO on a vdev.
*
* We currently allow values ranging from 512 bytes (2^9 = 512) to 64 KiB
* (2^16 = 65,536).
*/
#define ASHIFT_MIN 9
#define ASHIFT_MAX 16
/*
* Size of block to hold the configuration data (a packed nvlist)
*/
#define SPA_CONFIG_BLOCKSIZE (1ULL << 14)
2008-11-20 20:01:55 +00:00
/*
* The DVA size encodings for LSIZE and PSIZE support blocks up to 32MB.
* The ASIZE encoding should be at least 64 times larger (6 more bits)
* to support up to 4-way RAID-Z mirror mode with worst-case gang block
* overhead, three DVAs per bp, plus one more bit in case we do anything
* else that expands the ASIZE.
*/
#define SPA_LSIZEBITS 16 /* LSIZE up to 32M (2^16 * 512) */
#define SPA_PSIZEBITS 16 /* PSIZE up to 32M (2^16 * 512) */
#define SPA_ASIZEBITS 24 /* ASIZE up to 64 times larger */
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 04:04:53 +00:00
#define SPA_COMPRESSBITS 7
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
#define SPA_VDEVBITS 24
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 04:04:53 +00:00
2008-11-20 20:01:55 +00:00
/*
* All SPA data is represented by 128-bit data virtual addresses (DVAs).
* The members of the dva_t should be considered opaque outside the SPA.
*/
typedef struct dva {
uint64_t dva_word[2];
} dva_t;
OpenZFS 4185 - add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-R Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Approved by: Garrett D'Amore <garrett@damore.org> Ported by: Tony Hutter <hutter2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/4185 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee Porting Notes: This code is ported on top of the Illumos Crypto Framework code: https://github.com/zfsonlinux/zfs/pull/4329/commits/b5e030c8dbb9cd393d313571dee4756fbba8c22d The list of porting changes includes: - Copied module/icp/include/sha2/sha2.h directly from illumos - Removed from module/icp/algs/sha2/sha2.c: #pragma inline(SHA256Init, SHA384Init, SHA512Init) - Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since it now takes in an extra parameter. - Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c - Added skein & edonr to libicp/Makefile.am - Added sha512.S. It was generated from sha512-x86_64.pl in Illumos. - Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument. - In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section to not #include the non-existant endian.h. - In skein_test.c, renane NULL to 0 in "no test vector" array entries to get around a compiler warning. - Fixup test files: - Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>, - Remove <note.h> and define NOTE() as NOP. - Define u_longlong_t - Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p" - Rename NULL to 0 in "no test vector" array entries to get around a compiler warning. - Remove "for isa in $($ISAINFO); do" stuff - Add/update Makefiles - Add some userspace headers like stdio.h/stdlib.h in places of sys/types.h. - EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules. - Update scripts/zfs2zol-patch.sed - include <sys/sha2.h> in sha2_impl.h - Add sha2.h to include/sys/Makefile.am - Add skein and edonr dirs to icp Makefile - Add new checksums to zpool_get.cfg - Move checksum switch block from zfs_secpolicy_setprop() to zfs_check_settable() - Fix -Wuninitialized error in edonr_byteorder.h on PPC - Fix stack frame size errors on ARM32 - Don't unroll loops in Skein on 32-bit to save stack space - Add memory barriers in sha2.c on 32-bit to save stack space - Add filetest_001_pos.ksh checksum sanity test - Add option to write psudorandom data in file_write utility
2016-06-15 22:47:05 +00:00
/*
* Some checksums/hashes need a 256-bit initialization salt. This salt is kept
* secret and is suitable for use in MAC algorithms as the key.
*/
typedef struct zio_cksum_salt {
uint8_t zcs_bytes[32];
} zio_cksum_salt_t;
2008-11-20 20:01:55 +00:00
/*
* Each block is described by its DVAs, time of birth, checksum, etc.
* The word-by-word, bit-by-bit layout of the blkptr is as follows:
*
* 64 56 48 40 32 24 16 8 0
* +-------+-------+-------+-------+-------+-------+-------+-------+
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
* 0 | pad | vdev1 | GRID | ASIZE |
2008-11-20 20:01:55 +00:00
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 1 |G| offset1 |
* +-------+-------+-------+-------+-------+-------+-------+-------+
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
* 2 | pad | vdev2 | GRID | ASIZE |
2008-11-20 20:01:55 +00:00
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 3 |G| offset2 |
* +-------+-------+-------+-------+-------+-------+-------+-------+
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
* 4 | pad | vdev3 | GRID | ASIZE |
2008-11-20 20:01:55 +00:00
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 5 |G| offset3 |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 6 |BDX|lvl| type | cksum |E| comp| PSIZE | LSIZE |
2008-11-20 20:01:55 +00:00
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 7 | padding |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 8 | padding |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 9 | physical birth txg |
2008-11-20 20:01:55 +00:00
* +-------+-------+-------+-------+-------+-------+-------+-------+
* a | logical birth txg |
2008-11-20 20:01:55 +00:00
* +-------+-------+-------+-------+-------+-------+-------+-------+
* b | fill count |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* c | checksum[0] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* d | checksum[1] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* e | checksum[2] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* f | checksum[3] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
*
* Legend:
*
* vdev virtual device ID
* offset offset into virtual device
* LSIZE logical size
* PSIZE physical size (after compression)
* ASIZE allocated size (including RAID-Z parity and gang block headers)
* GRID RAID-Z layout information (reserved for future use)
* cksum checksum function
* comp compression function
* G gang block indicator
* B byteorder (endianness)
* D dedup
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
* X encryption
* E blkptr_t contains embedded data (see below)
2008-11-20 20:01:55 +00:00
* lvl level of indirection
* type DMU object type
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
* phys birth txg when dva[0] was written; zero if same as logical birth txg
* note that typically all the dva's would be written in this
* txg, but they could be different if they were moved by
* device removal.
* log. birth transaction group in which the block was logically born
2008-11-20 20:01:55 +00:00
* fill count number of non-zero blocks under this bp
* checksum[4] 256-bit checksum of the data this bp describes
*/
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
/*
* The blkptr_t's of encrypted blocks also need to store the encryption
* parameters so that the block can be decrypted. This layout is as follows:
*
* 64 56 48 40 32 24 16 8 0
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 0 | vdev1 | GRID | ASIZE |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 1 |G| offset1 |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 2 | vdev2 | GRID | ASIZE |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 3 |G| offset2 |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 4 | salt |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 5 | IV1 |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 6 |BDX|lvl| type | cksum |E| comp| PSIZE | LSIZE |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 7 | padding |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 8 | padding |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 9 | physical birth txg |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* a | logical birth txg |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* b | IV2 | fill count |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* c | checksum[0] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* d | checksum[1] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* e | MAC[0] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* f | MAC[1] |
* +-------+-------+-------+-------+-------+-------+-------+-------+
*
* Legend:
*
* salt Salt for generating encryption keys
* IV1 First 64 bits of encryption IV
* X Block requires encryption handling (set to 1)
* E blkptr_t contains embedded data (set to 0, see below)
* fill count number of non-zero blocks under this bp (truncated to 32 bits)
* IV2 Last 32 bits of encryption IV
* checksum[2] 128-bit checksum of the data this bp describes
* MAC[2] 128-bit message authentication code for this data
*
* The X bit being set indicates that this block is one of 3 types. If this is
* a level 0 block with an encrypted object type, the block is encrypted
* (see BP_IS_ENCRYPTED()). If this is a level 0 block with an unencrypted
* object type, this block is authenticated with an HMAC (see
* BP_IS_AUTHENTICATED()). Otherwise (if level > 0), this bp will use the MAC
* words to store a checksum-of-MACs from the level below (see
* BP_HAS_INDIRECT_MAC_CKSUM()). For convenience in the code, BP_IS_PROTECTED()
* refers to both encrypted and authenticated blocks and BP_USES_CRYPT()
* refers to any of these 3 kinds of blocks.
*
* The additional encryption parameters are the salt, IV, and MAC which are
* explained in greater detail in the block comment at the top of zio_crypt.c.
* The MAC occupies half of the checksum space since it serves a very similar
* purpose: to prevent data corruption on disk. The only functional difference
* is that the checksum is used to detect on-disk corruption whether or not the
* encryption key is loaded and the MAC provides additional protection against
* malicious disk tampering. We use the 3rd DVA to store the salt and first
* 64 bits of the IV. As a result encrypted blocks can only have 2 copies
* maximum instead of the normal 3. The last 32 bits of the IV are stored in
* the upper bits of what is usually the fill count. Note that only blocks at
* level 0 or -2 are ever encrypted, which allows us to guarantee that these
* 32 bits are not trampled over by other code (see zio_crypt.c for details).
* The salt and IV are not used for authenticated bps or bps with an indirect
* MAC checksum, so these blocks can utilize all 3 DVAs and the full 64 bits
* for the fill count.
*/
/*
* "Embedded" blkptr_t's don't actually point to a block, instead they
* have a data payload embedded in the blkptr_t itself. See the comment
* in blkptr.c for more details.
*
* The blkptr_t is laid out as follows:
*
* 64 56 48 40 32 24 16 8 0
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 0 | payload |
* 1 | payload |
* 2 | payload |
* 3 | payload |
* 4 | payload |
* 5 | payload |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 6 |BDX|lvl| type | etype |E| comp| PSIZE| LSIZE |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* 7 | payload |
* 8 | payload |
* 9 | payload |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* a | logical birth txg |
* +-------+-------+-------+-------+-------+-------+-------+-------+
* b | payload |
* c | payload |
* d | payload |
* e | payload |
* f | payload |
* +-------+-------+-------+-------+-------+-------+-------+-------+
*
* Legend:
*
* payload contains the embedded data
* B (byteorder) byteorder (endianness)
* D (dedup) padding (set to zero)
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
* X encryption (set to zero)
* E (embedded) set to one
* lvl indirection level
* type DMU object type
* etype how to interpret embedded data (BP_EMBEDDED_TYPE_*)
* comp compression function of payload
* PSIZE size of payload after compression, in bytes
* LSIZE logical size of payload, in bytes
* note that 25 bits is enough to store the largest
* "normal" BP's LSIZE (2^16 * 2^9) in bytes
* log. birth transaction group in which the block was logically born
*
* Note that LSIZE and PSIZE are stored in bytes, whereas for non-embedded
* bp's they are stored in units of SPA_MINBLOCKSHIFT.
* Generally, the generic BP_GET_*() macros can be used on embedded BP's.
* The B, D, X, lvl, type, and comp fields are stored the same as with normal
* BP's so the BP_SET_* macros can be used with them. etype, PSIZE, LSIZE must
* be set with the BPE_SET_* macros. BP_SET_EMBEDDED() should be called before
* other macros, as they assert that they are only used on BP's of the correct
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
* "embedded-ness". Encrypted blkptr_t's cannot be embedded because they use
* the payload space for encryption parameters (see the comment above on
* how encryption parameters are stored).
*/
#define BPE_GET_ETYPE(bp) \
(ASSERT(BP_IS_EMBEDDED(bp)), \
BF64_GET((bp)->blk_prop, 40, 8))
#define BPE_SET_ETYPE(bp, t) do { \
ASSERT(BP_IS_EMBEDDED(bp)); \
BF64_SET((bp)->blk_prop, 40, 8, t); \
_NOTE(CONSTCOND) } while (0)
#define BPE_GET_LSIZE(bp) \
(ASSERT(BP_IS_EMBEDDED(bp)), \
BF64_GET_SB((bp)->blk_prop, 0, 25, 0, 1))
#define BPE_SET_LSIZE(bp, x) do { \
ASSERT(BP_IS_EMBEDDED(bp)); \
BF64_SET_SB((bp)->blk_prop, 0, 25, 0, 1, x); \
_NOTE(CONSTCOND) } while (0)
#define BPE_GET_PSIZE(bp) \
(ASSERT(BP_IS_EMBEDDED(bp)), \
BF64_GET_SB((bp)->blk_prop, 25, 7, 0, 1))
#define BPE_SET_PSIZE(bp, x) do { \
ASSERT(BP_IS_EMBEDDED(bp)); \
BF64_SET_SB((bp)->blk_prop, 25, 7, 0, 1, x); \
_NOTE(CONSTCOND) } while (0)
typedef enum bp_embedded_type {
BP_EMBEDDED_TYPE_DATA,
BP_EMBEDDED_TYPE_RESERVED, /* Reserved for an unintegrated feature. */
NUM_BP_EMBEDDED_TYPES = BP_EMBEDDED_TYPE_RESERVED
} bp_embedded_type_t;
#define BPE_NUM_WORDS 14
#define BPE_PAYLOAD_SIZE (BPE_NUM_WORDS * sizeof (uint64_t))
#define BPE_IS_PAYLOADWORD(bp, wp) \
((wp) != &(bp)->blk_prop && (wp) != &(bp)->blk_birth)
2008-11-20 20:01:55 +00:00
#define SPA_BLKPTRSHIFT 7 /* blkptr_t is 128 bytes */
#define SPA_DVAS_PER_BP 3 /* Number of DVAs in a bp */
OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recovery Some work has been done lately to improve the debugability of the ZFS pool load (and import) process. This includes: 7638 Refactor spa_load_impl into several functions 8961 SPA load/import should tell us why it failed 7277 zdb should be able to print zfs_dbgmsg's To iterate on top of that, there's a few changes that were made to make the import process more resilient and crash free. One of the first tasks during the pool load process is to parse a config provided from userland that describes what devices the pool is composed of. A vdev tree is generated from that config, and then all the vdevs are opened. The Meta Object Set (MOS) of the pool is accessed, and several metadata objects that are necessary to load the pool are read. The exact configuration of the pool is also stored inside the MOS. Since the configuration provided from userland is external and might not accurately describe the vdev tree of the pool at the txg that is being loaded, it cannot be relied upon to safely operate the pool. For that reason, the configuration in the MOS is read early on. In the past, the two configurations were compared together and if there was a mismatch then the load process was aborted and an error was returned. The latter was a good way to ensure a pool does not get corrupted, however it made the pool load process needlessly fragile in cases where the vdev configuration changed or the userland configuration was outdated. Since the MOS is stored in 3 copies, the configuration provided by userland doesn't have to be perfect in order to read its contents. Hence, a new approach has been adopted: The pool is first opened with the untrusted userland configuration just so that the real configuration can be read from the MOS. The trusted MOS configuration is then used to generate a new vdev tree and the pool is re-opened. When the pool is opened with an untrusted configuration, writes are disabled to avoid accidentally damaging it. During reads, some sanity checks are performed on block pointers to see if each DVA points to a known vdev; when the configuration is untrusted, instead of panicking the system if those checks fail we simply avoid issuing reads to the invalid DVAs. This new two-step pool load process now allows rewinding pools accross vdev tree changes such as device replacement, addition, etc. Loading a pool from an external config file in a clustering environment also becomes much safer now since the pool will import even if the config is outdated and didn't, for instance, register a recent device addition. With this code in place, it became relatively easy to implement a long-sought-after feature: the ability to import a pool with missing top level (i.e. non-redundant) devices. Note that since this almost guarantees some loss of data, this feature is for now restricted to a read-only import. Porting notes (ZTS): * Fix 'make dist' target in zpool_import * The maximum path length allowed by tar is 99 characters. Several of the new test cases exceeded this limit resulting in them not being included in the tarball. Shorten the names slightly. * Set/get tunables using accessor functions. * Get last synced txg via the "zfs_txg_history" mechanism. * Clear zinject handlers in cleanup for import_cache_device_replaced and import_rewind_device_replaced in order that the zpool can be exported if there is an error. * Increase FILESIZE to 8G in zfs-test.sh to allow for a larger ext4 file system to be created on ZFS_DISK2. Also, there's no need to partition ZFS_DISK2 at all. The partitioning had already been disabled for multipath devices. Among other things, the partitioning steals some space from the ext4 file system, makes it difficult to accurately calculate the paramters to parted and can make some of the tests fail. * Increase FS_SIZE and FILE_SIZE in the zpool_import test configuration now that FILESIZE is larger. * Write more data in order that device evacuation take lonnger in a couple tests. * Use mkdir -p to avoid errors when the directory already exists. * Remove use of sudo in import_rewind_config_changed. Authored by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Andrew Stormont <andyjstormont@gmail.com> Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9075 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123 Closes #7459
2016-07-22 14:39:36 +00:00
#define SPA_SYNC_MIN_VDEVS 3 /* min vdevs to update during sync */
2008-11-20 20:01:55 +00:00
/*
* A block is a hole when it has either 1) never been written to, or
* 2) is zero-filled. In both cases, ZFS can return all zeroes for all reads
* without physically allocating disk space. Holes are represented in the
* blkptr_t structure by zeroed blk_dva. Correct checking for holes is
* done through the BP_IS_HOLE macro. For holes, the logical size, level,
* DMU object type, and birth times are all also stored for holes that
* were written to at some point (i.e. were punched after having been filled).
*/
typedef struct blkptr {
dva_t blk_dva[SPA_DVAS_PER_BP]; /* Data Virtual Addresses */
uint64_t blk_prop; /* size, compression, type, etc */
uint64_t blk_pad[2]; /* Extra space for the future */
uint64_t blk_phys_birth; /* txg when block was allocated */
uint64_t blk_birth; /* transaction group at birth */
uint64_t blk_fill; /* fill count */
zio_cksum_t blk_cksum; /* 256-bit checksum */
} blkptr_t;
2008-11-20 20:01:55 +00:00
/*
* Macros to get and set fields in a bp or DVA.
*/
#define DVA_GET_ASIZE(dva) \
BF64_GET_SB((dva)->dva_word[0], 0, SPA_ASIZEBITS, SPA_MINBLOCKSHIFT, 0)
2008-11-20 20:01:55 +00:00
#define DVA_SET_ASIZE(dva, x) \
BF64_SET_SB((dva)->dva_word[0], 0, SPA_ASIZEBITS, \
SPA_MINBLOCKSHIFT, 0, x)
2008-11-20 20:01:55 +00:00
#define DVA_GET_GRID(dva) BF64_GET((dva)->dva_word[0], 24, 8)
#define DVA_SET_GRID(dva, x) BF64_SET((dva)->dva_word[0], 24, 8, x)
OpenZFS 9238 - ZFS Spacemap Encoding V2 Motivation ========== The current space map encoding has the following disadvantages: [1] Assuming 512 sector size each entry can represent at most 16MB for a segment. This makes the encoding very inefficient for large regions of space. [2] As vdev-wide space maps have started to be used by new features (i.e. device removal, zpool checkpoint) we've started imposing limits in the vdevs that can be used with them based on the maximum addressable offset (currently 64PB for a top-level vdev). New encoding ============ The layout can be found at space_map.h and it remains backwards compatible with the old one. The introduced two-word entry format, besides extending the limits imposed by the single-entry layout, also includes a vdev field and some extra padding after its prefix. The extra padding after the prefix should is reserved for future usage (e.g. new prefixes for future encodings or new fields for flags). The new vdev field not only makes the space maps more self-descriptive, but also opens the doors for pool-wide space maps (expected to be used in the log spacemap project). One final important note is that the number of bits used for vdevs is reduced to 24 bits for blkptrs. That was decided as we don't know of any setups that use more than 16M vdevs for the time being and we wanted to fit the vdev field in the space map. In addition that gives us some extra bits in dva_t. Other references: ================= The new encoding is also discussed towards the end of the Log Space Map presentation from 2017's OpenZFS summit. Link: https://www.youtube.com/watch?v=jj2IxRkl5bQ Authored by: Serapheim Dimitropoulos <serapheim@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: George Wilson <gwilson@zfsmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Gordon Ross <gwr@nexenta.com> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-commit: https://github.com/openzfs/openzfs/commit/90a56e6d OpenZFS-issue: https://www.illumos.org/issues/9238 Closes #7665
2017-08-04 16:30:49 +00:00
#define DVA_GET_VDEV(dva) BF64_GET((dva)->dva_word[0], 32, SPA_VDEVBITS)
#define DVA_SET_VDEV(dva, x) \
BF64_SET((dva)->dva_word[0], 32, SPA_VDEVBITS, x)
2008-11-20 20:01:55 +00:00
#define DVA_GET_OFFSET(dva) \
BF64_GET_SB((dva)->dva_word[1], 0, 63, SPA_MINBLOCKSHIFT, 0)
#define DVA_SET_OFFSET(dva, x) \
BF64_SET_SB((dva)->dva_word[1], 0, 63, SPA_MINBLOCKSHIFT, 0, x)
#define DVA_GET_GANG(dva) BF64_GET((dva)->dva_word[1], 63, 1)
#define DVA_SET_GANG(dva, x) BF64_SET((dva)->dva_word[1], 63, 1, x)
#define BP_GET_LSIZE(bp) \
(BP_IS_EMBEDDED(bp) ? \
(BPE_GET_ETYPE(bp) == BP_EMBEDDED_TYPE_DATA ? BPE_GET_LSIZE(bp) : 0): \
BF64_GET_SB((bp)->blk_prop, 0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1))
#define BP_SET_LSIZE(bp, x) do { \
ASSERT(!BP_IS_EMBEDDED(bp)); \
BF64_SET_SB((bp)->blk_prop, \
0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1, x); \
_NOTE(CONSTCOND) } while (0)
2008-11-20 20:01:55 +00:00
#define BP_GET_PSIZE(bp) \
(BP_IS_EMBEDDED(bp) ? 0 : \
BF64_GET_SB((bp)->blk_prop, 16, SPA_PSIZEBITS, SPA_MINBLOCKSHIFT, 1))
#define BP_SET_PSIZE(bp, x) do { \
ASSERT(!BP_IS_EMBEDDED(bp)); \
BF64_SET_SB((bp)->blk_prop, \
16, SPA_PSIZEBITS, SPA_MINBLOCKSHIFT, 1, x); \
_NOTE(CONSTCOND) } while (0)
OpenZFS 6950 - ARC should cache compressed data Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matt Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Tom Caputi <tcaputi@datto.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Ported by: David Quigley <david.quigley@intel.com> This review covers the reading and writing of compressed arc headers, sharing data between the arc_hdr_t and the arc_buf_t, and the implementation of a new dbuf cache to keep frequently access data uncompressed. I've added a new member to l1 arc hdr called b_pdata. The b_pdata always hangs off the arc_buf_hdr_t (if an L1 hdr is in use) and points to the physical block for that DVA. The physical block may or may not be compressed. If compressed arc is enabled and the block on-disk is compressed, then the b_pdata will match the block on-disk and remain compressed in memory. If the block on disk is not compressed, then neither will the b_pdata. Lastly, if compressed arc is disabled, then b_pdata will always be an uncompressed version of the on-disk block. Typically the arc will cache only the arc_buf_hdr_t and will aggressively evict any arc_buf_t's that are no longer referenced. This means that the arc will primarily have compressed blocks as the arc_buf_t's are considered overhead and are always uncompressed. When a consumer reads a block we first look to see if the arc_buf_hdr_t is cached. If the hdr is cached then we allocate a new arc_buf_t and decompress the b_pdata contents into the arc_buf_t's b_data. If the hdr already has a arc_buf_t, then we will allocate an additional arc_buf_t and bcopy the uncompressed contents from the first arc_buf_t to the new one. Writing to the compressed arc requires that we first discard the b_pdata since the physical block is about to be rewritten. The new data contents will be passed in via an arc_buf_t (uncompressed) and during the I/O pipeline stages we will copy the physical block contents to a newly allocated b_pdata. When an l2arc is inuse it will also take advantage of the b_pdata. Now the l2arc will always write the contents of b_pdata to the l2arc. This means that when compressed arc is enabled that the l2arc blocks are identical to those stored in the main data pool. This provides a significant advantage since we can leverage the bp's checksum when reading from the l2arc to determine if the contents are valid. If the compressed arc is disabled, then we must first transform the read block to look like the physical block in the main data pool before comparing the checksum and determining it's valid. OpenZFS-issue: https://www.illumos.org/issues/6950 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7fc10f0 Issue #5078
2016-06-02 04:04:53 +00:00
#define BP_GET_COMPRESS(bp) \
BF64_GET((bp)->blk_prop, 32, SPA_COMPRESSBITS)
#define BP_SET_COMPRESS(bp, x) \
BF64_SET((bp)->blk_prop, 32, SPA_COMPRESSBITS, x)
2008-11-20 20:01:55 +00:00
#define BP_IS_EMBEDDED(bp) BF64_GET((bp)->blk_prop, 39, 1)
#define BP_SET_EMBEDDED(bp, x) BF64_SET((bp)->blk_prop, 39, 1, x)
#define BP_GET_CHECKSUM(bp) \
(BP_IS_EMBEDDED(bp) ? ZIO_CHECKSUM_OFF : \
BF64_GET((bp)->blk_prop, 40, 8))
#define BP_SET_CHECKSUM(bp, x) do { \
ASSERT(!BP_IS_EMBEDDED(bp)); \
BF64_SET((bp)->blk_prop, 40, 8, x); \
_NOTE(CONSTCOND) } while (0)
2008-11-20 20:01:55 +00:00
#define BP_GET_TYPE(bp) BF64_GET((bp)->blk_prop, 48, 8)
#define BP_SET_TYPE(bp, x) BF64_SET((bp)->blk_prop, 48, 8, x)
2008-11-20 20:01:55 +00:00
#define BP_GET_LEVEL(bp) BF64_GET((bp)->blk_prop, 56, 5)
#define BP_SET_LEVEL(bp, x) BF64_SET((bp)->blk_prop, 56, 5, x)
2008-11-20 20:01:55 +00:00
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
/* encrypted, authenticated, and MAC cksum bps use the same bit */
#define BP_USES_CRYPT(bp) BF64_GET((bp)->blk_prop, 61, 1)
#define BP_SET_CRYPT(bp, x) BF64_SET((bp)->blk_prop, 61, 1, x)
#define BP_IS_ENCRYPTED(bp) \
(BP_USES_CRYPT(bp) && \
BP_GET_LEVEL(bp) <= 0 && \
DMU_OT_IS_ENCRYPTED(BP_GET_TYPE(bp)))
#define BP_IS_AUTHENTICATED(bp) \
(BP_USES_CRYPT(bp) && \
BP_GET_LEVEL(bp) <= 0 && \
!DMU_OT_IS_ENCRYPTED(BP_GET_TYPE(bp)))
#define BP_HAS_INDIRECT_MAC_CKSUM(bp) \
(BP_USES_CRYPT(bp) && BP_GET_LEVEL(bp) > 0)
#define BP_IS_PROTECTED(bp) \
(BP_IS_ENCRYPTED(bp) || BP_IS_AUTHENTICATED(bp))
#define BP_GET_DEDUP(bp) BF64_GET((bp)->blk_prop, 62, 1)
#define BP_SET_DEDUP(bp, x) BF64_SET((bp)->blk_prop, 62, 1, x)
#define BP_GET_BYTEORDER(bp) BF64_GET((bp)->blk_prop, 63, 1)
#define BP_SET_BYTEORDER(bp, x) BF64_SET((bp)->blk_prop, 63, 1, x)
#define BP_PHYSICAL_BIRTH(bp) \
(BP_IS_EMBEDDED(bp) ? 0 : \
(bp)->blk_phys_birth ? (bp)->blk_phys_birth : (bp)->blk_birth)
#define BP_SET_BIRTH(bp, logical, physical) \
{ \
ASSERT(!BP_IS_EMBEDDED(bp)); \
(bp)->blk_birth = (logical); \
(bp)->blk_phys_birth = ((logical) == (physical) ? 0 : (physical)); \
}
2008-11-20 20:01:55 +00:00
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
#define BP_GET_FILL(bp) \
((BP_IS_ENCRYPTED(bp)) ? BF64_GET((bp)->blk_fill, 0, 32) : \
((BP_IS_EMBEDDED(bp)) ? 1 : (bp)->blk_fill))
#define BP_SET_FILL(bp, fill) \
{ \
if (BP_IS_ENCRYPTED(bp)) \
BF64_SET((bp)->blk_fill, 0, 32, fill); \
else \
(bp)->blk_fill = fill; \
}
#define BP_GET_IV2(bp) \
(ASSERT(BP_IS_ENCRYPTED(bp)), \
BF64_GET((bp)->blk_fill, 32, 32))
#define BP_SET_IV2(bp, iv2) \
{ \
ASSERT(BP_IS_ENCRYPTED(bp)); \
BF64_SET((bp)->blk_fill, 32, 32, iv2); \
}
#define BP_IS_METADATA(bp) \
(BP_GET_LEVEL(bp) > 0 || DMU_OT_IS_METADATA(BP_GET_TYPE(bp)))
2008-11-20 20:01:55 +00:00
#define BP_GET_ASIZE(bp) \
(BP_IS_EMBEDDED(bp) ? 0 : \
DVA_GET_ASIZE(&(bp)->blk_dva[0]) + \
DVA_GET_ASIZE(&(bp)->blk_dva[1]) + \
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
(DVA_GET_ASIZE(&(bp)->blk_dva[2]) * !BP_IS_ENCRYPTED(bp)))
2008-11-20 20:01:55 +00:00
#define BP_GET_UCSIZE(bp) \
(BP_IS_METADATA(bp) ? BP_GET_PSIZE(bp) : BP_GET_LSIZE(bp))
2008-11-20 20:01:55 +00:00
#define BP_GET_NDVAS(bp) \
(BP_IS_EMBEDDED(bp) ? 0 : \
!!DVA_GET_ASIZE(&(bp)->blk_dva[0]) + \
2008-11-20 20:01:55 +00:00
!!DVA_GET_ASIZE(&(bp)->blk_dva[1]) + \
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
(!!DVA_GET_ASIZE(&(bp)->blk_dva[2]) * !BP_IS_ENCRYPTED(bp)))
2008-11-20 20:01:55 +00:00
#define BP_COUNT_GANG(bp) \
(BP_IS_EMBEDDED(bp) ? 0 : \
2008-11-20 20:01:55 +00:00
(DVA_GET_GANG(&(bp)->blk_dva[0]) + \
DVA_GET_GANG(&(bp)->blk_dva[1]) + \
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
(DVA_GET_GANG(&(bp)->blk_dva[2]) * !BP_IS_ENCRYPTED(bp))))
2008-11-20 20:01:55 +00:00
#define DVA_EQUAL(dva1, dva2) \
((dva1)->dva_word[1] == (dva2)->dva_word[1] && \
(dva1)->dva_word[0] == (dva2)->dva_word[0])
#define BP_EQUAL(bp1, bp2) \
(BP_PHYSICAL_BIRTH(bp1) == BP_PHYSICAL_BIRTH(bp2) && \
(bp1)->blk_birth == (bp2)->blk_birth && \
DVA_EQUAL(&(bp1)->blk_dva[0], &(bp2)->blk_dva[0]) && \
DVA_EQUAL(&(bp1)->blk_dva[1], &(bp2)->blk_dva[1]) && \
DVA_EQUAL(&(bp1)->blk_dva[2], &(bp2)->blk_dva[2]))
2008-11-20 20:01:55 +00:00
#define DVA_IS_VALID(dva) (DVA_GET_ASIZE(dva) != 0)
#define BP_IDENTITY(bp) (ASSERT(!BP_IS_EMBEDDED(bp)), &(bp)->blk_dva[0])
#define BP_IS_GANG(bp) \
(BP_IS_EMBEDDED(bp) ? B_FALSE : DVA_GET_GANG(BP_IDENTITY(bp)))
#define DVA_IS_EMPTY(dva) ((dva)->dva_word[0] == 0ULL && \
(dva)->dva_word[1] == 0ULL)
#define BP_IS_HOLE(bp) \
(!BP_IS_EMBEDDED(bp) && DVA_IS_EMPTY(BP_IDENTITY(bp)))
/* BP_IS_RAIDZ(bp) assumes no block compression */
#define BP_IS_RAIDZ(bp) (DVA_GET_ASIZE(&(bp)->blk_dva[0]) > \
BP_GET_PSIZE(bp))
2008-11-20 20:01:55 +00:00
#define BP_ZERO(bp) \
2008-11-20 20:01:55 +00:00
{ \
(bp)->blk_dva[0].dva_word[0] = 0; \
(bp)->blk_dva[0].dva_word[1] = 0; \
(bp)->blk_dva[1].dva_word[0] = 0; \
(bp)->blk_dva[1].dva_word[1] = 0; \
(bp)->blk_dva[2].dva_word[0] = 0; \
(bp)->blk_dva[2].dva_word[1] = 0; \
(bp)->blk_prop = 0; \
(bp)->blk_pad[0] = 0; \
(bp)->blk_pad[1] = 0; \
(bp)->blk_phys_birth = 0; \
(bp)->blk_birth = 0; \
2008-11-20 20:01:55 +00:00
(bp)->blk_fill = 0; \
ZIO_SET_CHECKSUM(&(bp)->blk_cksum, 0, 0, 0, 0); \
}
#ifdef _BIG_ENDIAN
#define ZFS_HOST_BYTEORDER (0ULL)
#else
#define ZFS_HOST_BYTEORDER (1ULL)
2008-11-20 20:01:55 +00:00
#endif
#define BP_SHOULD_BYTESWAP(bp) (BP_GET_BYTEORDER(bp) != ZFS_HOST_BYTEORDER)
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
#define BP_SPRINTF_LEN 400
2008-11-20 20:01:55 +00:00
/*
* This macro allows code sharing between zfs, libzpool, and mdb.
* 'func' is either snprintf() or mdb_snprintf().
* 'ws' (whitespace) can be ' ' for single-line format, '\n' for multi-line.
*/
#define SNPRINTF_BLKPTR(func, ws, buf, size, bp, type, checksum, compress) \
{ \
static const char *copyname[] = \
{ "zero", "single", "double", "triple" }; \
int len = 0; \
int copies = 0; \
const char *crypt_type; \
if (bp != NULL) { \
if (BP_IS_ENCRYPTED(bp)) { \
crypt_type = "encrypted"; \
/* LINTED E_SUSPICIOUS_COMPARISON */ \
} else if (BP_IS_AUTHENTICATED(bp)) { \
crypt_type = "authenticated"; \
} else if (BP_HAS_INDIRECT_MAC_CKSUM(bp)) { \
crypt_type = "indirect-MAC"; \
} else { \
crypt_type = "unencrypted"; \
} \
} \
if (bp == NULL) { \
len += func(buf + len, size - len, "<NULL>"); \
} else if (BP_IS_HOLE(bp)) { \
len += func(buf + len, size - len, \
"HOLE [L%llu %s] " \
"size=%llxL birth=%lluL", \
(u_longlong_t)BP_GET_LEVEL(bp), \
type, \
(u_longlong_t)BP_GET_LSIZE(bp), \
(u_longlong_t)bp->blk_birth); \
} else if (BP_IS_EMBEDDED(bp)) { \
len = func(buf + len, size - len, \
"EMBEDDED [L%llu %s] et=%u %s " \
"size=%llxL/%llxP birth=%lluL", \
(u_longlong_t)BP_GET_LEVEL(bp), \
type, \
(int)BPE_GET_ETYPE(bp), \
compress, \
(u_longlong_t)BPE_GET_LSIZE(bp), \
(u_longlong_t)BPE_GET_PSIZE(bp), \
(u_longlong_t)bp->blk_birth); \
} else { \
for (int d = 0; d < BP_GET_NDVAS(bp); d++) { \
const dva_t *dva = &bp->blk_dva[d]; \
if (DVA_IS_VALID(dva)) \
copies++; \
len += func(buf + len, size - len, \
"DVA[%d]=<%llu:%llx:%llx>%c", d, \
(u_longlong_t)DVA_GET_VDEV(dva), \
(u_longlong_t)DVA_GET_OFFSET(dva), \
(u_longlong_t)DVA_GET_ASIZE(dva), \
ws); \
} \
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
if (BP_IS_ENCRYPTED(bp)) { \
len += func(buf + len, size - len, \
"salt=%llx iv=%llx:%llx%c", \
(u_longlong_t)bp->blk_dva[2].dva_word[0], \
(u_longlong_t)bp->blk_dva[2].dva_word[1], \
(u_longlong_t)BP_GET_IV2(bp), \
ws); \
} \
if (BP_IS_GANG(bp) && \
DVA_GET_ASIZE(&bp->blk_dva[2]) <= \
DVA_GET_ASIZE(&bp->blk_dva[1]) / 2) \
copies--; \
len += func(buf + len, size - len, \
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
"[L%llu %s] %s %s %s %s %s %s %s%c" \
"size=%llxL/%llxP birth=%lluL/%lluP fill=%llu%c" \
"cksum=%llx:%llx:%llx:%llx", \
(u_longlong_t)BP_GET_LEVEL(bp), \
type, \
checksum, \
compress, \
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
crypt_type, \
BP_GET_BYTEORDER(bp) == 0 ? "BE" : "LE", \
BP_IS_GANG(bp) ? "gang" : "contiguous", \
BP_GET_DEDUP(bp) ? "dedup" : "unique", \
copyname[copies], \
ws, \
(u_longlong_t)BP_GET_LSIZE(bp), \
(u_longlong_t)BP_GET_PSIZE(bp), \
(u_longlong_t)bp->blk_birth, \
(u_longlong_t)BP_PHYSICAL_BIRTH(bp), \
(u_longlong_t)BP_GET_FILL(bp), \
ws, \
(u_longlong_t)bp->blk_cksum.zc_word[0], \
(u_longlong_t)bp->blk_cksum.zc_word[1], \
(u_longlong_t)bp->blk_cksum.zc_word[2], \
(u_longlong_t)bp->blk_cksum.zc_word[3]); \
} \
ASSERT(len < size); \
}
2008-11-20 20:01:55 +00:00
#define BP_GET_BUFC_TYPE(bp) \
(BP_IS_METADATA(bp) ? ARC_BUFC_METADATA : ARC_BUFC_DATA)
typedef enum spa_import_type {
SPA_IMPORT_EXISTING,
SPA_IMPORT_ASSEMBLE
} spa_import_type_t;
2008-11-20 20:01:55 +00:00
/* state manipulation functions */
extern int spa_open(const char *pool, spa_t **, void *tag);
extern int spa_open_rewind(const char *pool, spa_t **, void *tag,
nvlist_t *policy, nvlist_t **config);
extern int spa_get_stats(const char *pool, nvlist_t **config, char *altroot,
size_t buflen);
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
extern int spa_create(const char *pool, nvlist_t *nvroot, nvlist_t *props,
nvlist_t *zplprops, struct dsl_crypto_params *dcp);
extern int spa_import(char *pool, nvlist_t *config, nvlist_t *props,
uint64_t flags);
2008-11-20 20:01:55 +00:00
extern nvlist_t *spa_tryimport(nvlist_t *tryconfig);
extern int spa_destroy(char *pool);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
extern int spa_checkpoint(const char *pool);
extern int spa_checkpoint_discard(const char *pool);
2009-01-15 21:59:39 +00:00
extern int spa_export(char *pool, nvlist_t **oldconfig, boolean_t force,
boolean_t hardforce);
2008-11-20 20:01:55 +00:00
extern int spa_reset(char *pool);
extern void spa_async_request(spa_t *spa, int flag);
extern void spa_async_unrequest(spa_t *spa, int flag);
2008-11-20 20:01:55 +00:00
extern void spa_async_suspend(spa_t *spa);
extern void spa_async_resume(spa_t *spa);
extern spa_t *spa_inject_addref(char *pool);
extern void spa_inject_delref(spa_t *spa);
extern void spa_scan_stat_init(spa_t *spa);
extern int spa_scan_get_stats(spa_t *spa, pool_scan_stat_t *ps);
2008-11-20 20:01:55 +00:00
#define SPA_ASYNC_CONFIG_UPDATE 0x01
#define SPA_ASYNC_REMOVE 0x02
#define SPA_ASYNC_PROBE 0x04
#define SPA_ASYNC_RESILVER_DONE 0x08
#define SPA_ASYNC_RESILVER 0x10
2009-07-02 22:44:48 +00:00
#define SPA_ASYNC_AUTOEXPAND 0x20
#define SPA_ASYNC_REMOVE_DONE 0x40
#define SPA_ASYNC_REMOVE_STOP 0x80
/*
* Controls the behavior of spa_vdev_remove().
*/
#define SPA_REMOVE_UNSPARE 0x01
#define SPA_REMOVE_DONE 0x02
2008-11-20 20:01:55 +00:00
/* device manipulation */
extern int spa_vdev_add(spa_t *spa, nvlist_t *nvroot);
extern int spa_vdev_attach(spa_t *spa, uint64_t guid, nvlist_t *nvroot,
int replacing);
2009-01-15 21:59:39 +00:00
extern int spa_vdev_detach(spa_t *spa, uint64_t guid, uint64_t pguid,
int replace_done);
2008-11-20 20:01:55 +00:00
extern int spa_vdev_remove(spa_t *spa, uint64_t guid, boolean_t unspare);
extern boolean_t spa_vdev_remove_active(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern int spa_vdev_setpath(spa_t *spa, uint64_t guid, const char *newpath);
2009-07-02 22:44:48 +00:00
extern int spa_vdev_setfru(spa_t *spa, uint64_t guid, const char *newfru);
extern int spa_vdev_split_mirror(spa_t *spa, char *newname, nvlist_t *config,
nvlist_t *props, boolean_t exp);
2008-11-20 20:01:55 +00:00
/* spare state (which is global across all pools) */
extern void spa_spare_add(vdev_t *vd);
extern void spa_spare_remove(vdev_t *vd);
extern boolean_t spa_spare_exists(uint64_t guid, uint64_t *pool, int *refcnt);
2008-11-20 20:01:55 +00:00
extern void spa_spare_activate(vdev_t *vd);
/* L2ARC state (which is global across all pools) */
extern void spa_l2cache_add(vdev_t *vd);
extern void spa_l2cache_remove(vdev_t *vd);
extern boolean_t spa_l2cache_exists(uint64_t guid, uint64_t *pool);
extern void spa_l2cache_activate(vdev_t *vd);
extern void spa_l2cache_drop(spa_t *spa);
/* scanning */
extern int spa_scan(spa_t *spa, pool_scan_func_t func);
extern int spa_scan_stop(spa_t *spa);
extern int spa_scrub_pause_resume(spa_t *spa, pool_scrub_cmd_t flag);
2008-11-20 20:01:55 +00:00
/* spa syncing */
extern void spa_sync(spa_t *spa, uint64_t txg); /* only for DMU use */
extern void spa_sync_allpools(void);
extern int zfs_sync_pass_deferred_free;
/* spa namespace global mutex */
extern kmutex_t spa_namespace_lock;
2008-11-20 20:01:55 +00:00
/*
* SPA configuration functions in spa_config.c
*/
#define SPA_CONFIG_UPDATE_POOL 0
#define SPA_CONFIG_UPDATE_VDEVS 1
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
extern void spa_write_cachefile(spa_t *, boolean_t, boolean_t);
2008-11-20 20:01:55 +00:00
extern void spa_config_load(void);
extern nvlist_t *spa_all_configs(uint64_t *);
extern void spa_config_set(spa_t *spa, nvlist_t *config);
extern nvlist_t *spa_config_generate(spa_t *spa, vdev_t *vd, uint64_t txg,
int getstats);
extern void spa_config_update(spa_t *spa, int what);
/*
* Miscellaneous SPA routines in spa_misc.c
*/
/* Namespace manipulation */
extern spa_t *spa_lookup(const char *name);
extern spa_t *spa_add(const char *name, nvlist_t *config, const char *altroot);
2008-11-20 20:01:55 +00:00
extern void spa_remove(spa_t *spa);
extern spa_t *spa_next(spa_t *prev);
/* Refcount functions */
extern void spa_open_ref(spa_t *spa, void *tag);
extern void spa_close(spa_t *spa, void *tag);
extern void spa_async_close(spa_t *spa, void *tag);
2008-11-20 20:01:55 +00:00
extern boolean_t spa_refcount_zero(spa_t *spa);
#define SCL_NONE 0x00
#define SCL_CONFIG 0x01
#define SCL_STATE 0x02
#define SCL_L2ARC 0x04 /* hack until L2ARC 2.0 */
#define SCL_ALLOC 0x08
#define SCL_ZIO 0x10
#define SCL_FREE 0x20
#define SCL_VDEV 0x40
#define SCL_LOCKS 7
#define SCL_ALL ((1 << SCL_LOCKS) - 1)
#define SCL_STATE_ALL (SCL_STATE | SCL_L2ARC | SCL_ZIO)
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
/* Historical pool statistics */
typedef struct spa_history_kstat {
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
kmutex_t lock;
uint64_t count;
uint64_t size;
kstat_t *kstat;
void *private;
list_t list;
} spa_history_kstat_t;
typedef struct spa_history_list {
uint64_t size;
procfs_list_t procfs_list;
} spa_history_list_t;
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
typedef struct spa_stats {
spa_history_list_t read_history;
spa_history_list_t txg_history;
spa_history_kstat_t tx_assign_histogram;
spa_history_kstat_t io_history;
spa_history_list_t mmp_history;
spa_history_kstat_t state; /* pool state */
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
} spa_stats_t;
typedef enum txg_state {
TXG_STATE_BIRTH = 0,
TXG_STATE_OPEN = 1,
TXG_STATE_QUIESCED = 2,
TXG_STATE_WAIT_FOR_SYNC = 3,
TXG_STATE_SYNCED = 4,
TXG_STATE_COMMITTED = 5,
} txg_state_t;
typedef struct txg_stat {
vdev_stat_t vs1;
vdev_stat_t vs2;
uint64_t txg;
uint64_t ndirty;
} txg_stat_t;
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
extern void spa_stats_init(spa_t *spa);
extern void spa_stats_destroy(spa_t *spa);
extern void spa_read_history_add(spa_t *spa, const zbookmark_phys_t *zb,
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
uint32_t aflags);
extern void spa_txg_history_add(spa_t *spa, uint64_t txg, hrtime_t birth_time);
extern int spa_txg_history_set(spa_t *spa, uint64_t txg,
txg_state_t completed_state, hrtime_t completed_time);
extern txg_stat_t *spa_txg_history_init_io(spa_t *, uint64_t,
struct dsl_pool *);
extern void spa_txg_history_fini_io(spa_t *, txg_stat_t *);
extern void spa_tx_assign_add_nsecs(spa_t *spa, uint64_t nsecs);
Record skipped MMP writes in multihost_history Once per pass through the MMP thread's loop, the vdev tree is walked to find a suitable leaf to write the next MMP block to. If no such leaf is found, the thread sleeps for a while and resumes at the top of the loop. Add an entry to multihost_history when no leaf can be found, and record the reason in the error column. The error code for such entries is a bitfield, displayed in hex: 0x1 At least one vdev (interior or leaf) was not writeable. 0x2 At least one writeable leaf vdev was found, but it had a pending MMP write. timestamp = the time in seconds since the epoch when no leaf could be found originally. duration = the time (in ns) during which no MMP block was written for this reason. This does not include the preceeding inter-write period nor the following inter-write period. vdev_guid = the number of sequential cycles of the MMP thread looop when this occurred. Sample output, truncated to fit: For records of skipped MMP writes the right-most column, vdev_path, is reported as "-". id txg timestamp error duration mmp_delay vdev_guid ... 936 11 1520036441 0 146264 891422313 1740883117838 ... 937 11 1520036441 0 163956 888356657 7320395061548 ... 938 11 1520036442 0 130690 885314969 7320395061548 ... 939 11 1520036442 0 2001068577 882296582 1740883117838 ... 940 11 1520036443 0 161806 882296582 7320395061548 ... 941 11 1520036443 0x2 0 998020546 1 ... 942 11 1520036444 0 136585 998020546 7320395061548 ... 943 11 1520036444 0x2 0 998020257 1 ... 944 11 1520036445 5 2002662964 994160219 1740883117838 ... 945 11 1520036445 0x2 998073118 994160219 3 ... 946 11 1520036447 0 247136 994160219 7320395061548 ... Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #7212
2018-02-27 01:32:49 +00:00
extern int spa_mmp_history_set_skip(spa_t *spa, uint64_t mmp_kstat_id);
extern int spa_mmp_history_set(spa_t *spa, uint64_t mmp_kstat_id, int io_error,
hrtime_t duration);
extern void spa_mmp_history_add(spa_t *spa, uint64_t txg, uint64_t timestamp,
Record skipped MMP writes in multihost_history Once per pass through the MMP thread's loop, the vdev tree is walked to find a suitable leaf to write the next MMP block to. If no such leaf is found, the thread sleeps for a while and resumes at the top of the loop. Add an entry to multihost_history when no leaf can be found, and record the reason in the error column. The error code for such entries is a bitfield, displayed in hex: 0x1 At least one vdev (interior or leaf) was not writeable. 0x2 At least one writeable leaf vdev was found, but it had a pending MMP write. timestamp = the time in seconds since the epoch when no leaf could be found originally. duration = the time (in ns) during which no MMP block was written for this reason. This does not include the preceeding inter-write period nor the following inter-write period. vdev_guid = the number of sequential cycles of the MMP thread looop when this occurred. Sample output, truncated to fit: For records of skipped MMP writes the right-most column, vdev_path, is reported as "-". id txg timestamp error duration mmp_delay vdev_guid ... 936 11 1520036441 0 146264 891422313 1740883117838 ... 937 11 1520036441 0 163956 888356657 7320395061548 ... 938 11 1520036442 0 130690 885314969 7320395061548 ... 939 11 1520036442 0 2001068577 882296582 1740883117838 ... 940 11 1520036443 0 161806 882296582 7320395061548 ... 941 11 1520036443 0x2 0 998020546 1 ... 942 11 1520036444 0 136585 998020546 7320395061548 ... 943 11 1520036444 0x2 0 998020257 1 ... 944 11 1520036445 5 2002662964 994160219 1740883117838 ... 945 11 1520036445 0x2 998073118 994160219 3 ... 946 11 1520036447 0 247136 994160219 7320395061548 ... Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #7212
2018-02-27 01:32:49 +00:00
uint64_t mmp_delay, vdev_t *vd, int label, uint64_t mmp_kstat_id,
int error);
Add visibility in to arc_read This change is an attempt to add visibility into the arc_read calls occurring on a system, in real time. To do this, a list was added to the in memory SPA data structure for a pool, with each element on the list corresponding to a call to arc_read. These entries are then exported through the kstat interface, which can then be interpreted in userspace. For each arc_read call, the following information is exported: * A unique identifier (uint64_t) * The time the entry was added to the list (hrtime_t) (*not* wall clock time; relative to the other entries on the list) * The objset ID (uint64_t) * The object number (uint64_t) * The indirection level (uint64_t) * The block ID (uint64_t) * The name of the function originating the arc_read call (char[24]) * The arc_flags from the arc_read call (uint32_t) * The PID of the reading thread (pid_t) * The command or name of thread originating read (char[16]) From this exported information one can see, in real time, exactly what is being read, what function is generating the read, and whether or not the read was found to be already cached. There is still some work to be done, but this should serve as a good starting point. Specifically, dbuf_read's are not accounted for in the currently exported information. Thus, a follow up patch should probably be added to export these calls that never call into arc_read (they only hit the dbuf hash table). In addition, it might be nice to create a utility similar to "arcstat.py" to digest the exported information and display it in a more readable format. Or perhaps, log the information and allow for it to be "replayed" at a later time. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-09-06 23:09:05 +00:00
/* Pool configuration locks */
extern int spa_config_tryenter(spa_t *spa, int locks, void *tag, krw_t rw);
extern void spa_config_enter(spa_t *spa, int locks, void *tag, krw_t rw);
extern void spa_config_exit(spa_t *spa, int locks, void *tag);
extern int spa_config_held(spa_t *spa, int locks, krw_t rw);
2008-11-20 20:01:55 +00:00
/* Pool vdev add/remove lock */
extern uint64_t spa_vdev_enter(spa_t *spa);
extern uint64_t spa_vdev_config_enter(spa_t *spa);
extern void spa_vdev_config_exit(spa_t *spa, vdev_t *vd, uint64_t txg,
int error, char *tag);
2008-11-20 20:01:55 +00:00
extern int spa_vdev_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error);
/* Pool vdev state change lock */
extern void spa_vdev_state_enter(spa_t *spa, int oplock);
extern int spa_vdev_state_exit(spa_t *spa, vdev_t *vd, int error);
/* Log state */
typedef enum spa_log_state {
SPA_LOG_UNKNOWN = 0, /* unknown log state */
SPA_LOG_MISSING, /* missing log(s) */
SPA_LOG_CLEAR, /* clear the log(s) */
SPA_LOG_GOOD, /* log(s) are good */
} spa_log_state_t;
extern spa_log_state_t spa_get_log_state(spa_t *spa);
extern void spa_set_log_state(spa_t *spa, spa_log_state_t state);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
extern int spa_reset_logs(spa_t *spa);
/* Log claim callback */
extern void spa_claim_notify(zio_t *zio);
extern void spa_deadman(void *);
2008-11-20 20:01:55 +00:00
/* Accessor functions */
extern boolean_t spa_shutting_down(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern struct dsl_pool *spa_get_dsl(spa_t *spa);
extern boolean_t spa_is_initializing(spa_t *spa);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
extern boolean_t spa_indirect_vdevs_loaded(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern blkptr_t *spa_get_rootblkptr(spa_t *spa);
extern void spa_set_rootblkptr(spa_t *spa, const blkptr_t *bp);
extern void spa_altroot(spa_t *, char *, size_t);
extern int spa_sync_pass(spa_t *spa);
extern char *spa_name(spa_t *spa);
extern uint64_t spa_guid(spa_t *spa);
extern uint64_t spa_load_guid(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern uint64_t spa_last_synced_txg(spa_t *spa);
extern uint64_t spa_first_txg(spa_t *spa);
extern uint64_t spa_syncing_txg(spa_t *spa);
extern uint64_t spa_final_dirty_txg(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern uint64_t spa_version(spa_t *spa);
extern pool_state_t spa_state(spa_t *spa);
extern spa_load_state_t spa_load_state(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern uint64_t spa_freeze_txg(spa_t *spa);
OpenZFS 7793 - ztest fails assertion in dmu_tx_willuse_space Reviewed by: Steve Gonczi <steve.gonczi@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Background information: This assertion about tx_space_* verifies that we are not dirtying more stuff than we thought we would. We “need” to know how much we will dirty so that we can check if we should fail this transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() — typically less than a millisecond), we call dbuf_dirty() on the exact blocks that will be modified. Once this happens, the temporary accounting in tx_space_* is unnecessary, because we know exactly what blocks are newly dirtied; we call dnode_willuse_space() to track this more exact accounting. The fundamental problem causing this bug is that dmu_tx_hold_*() relies on the current state in the DMU (e.g. dn_nlevels) to predict how much will be dirtied by this transaction, but this state can change before we actually perform the transaction (i.e. call dbuf_dirty()). This bug will be fixed by removing the assertion that the tx_space_* accounting is perfectly accurate (i.e. we never dirty more than was predicted by dmu_tx_hold_*()). By removing the requirement that this accounting be perfectly accurate, we can also vastly simplify it, e.g. removing most of the logic in dmu_tx_count_*(). The new tx space accounting will be very approximate, and may be more or less than what is actually dirtied. It will still be used to determine if this transaction will put us over quota. Transactions that are marked by dmu_tx_mark_netfree() will be excepted from this check. We won’t make an attempt to determine how much space will be freed by the transaction — this was rarely accurate enough to determine if a transaction should be permitted when we are over quota, which is why dmu_tx_mark_netfree() was introduced in 2014. We also won’t attempt to give “credit” when overwriting existing blocks, if those blocks may be freed. This allows us to remove the do_free_accounting logic in dbuf_dirty(), and associated routines. This logic attempted to predict what will be on disk when this txg syncs, to know if the overwritten block will be freed (i.e. exists, and has no snapshots). OpenZFS-issue: https://www.illumos.org/issues/7793 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a Upstream bugs: DLPX-32883a Closes #5804 Porting notes: - DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(), Using the default dnode size would be slightly better. - DEBUG_DMU_TX wrappers and configure option removed. - Resolved _by_dnode() conflicts these changes have not yet been applied to OpenZFS.
2017-03-07 17:51:59 +00:00
extern uint64_t spa_get_worst_case_asize(spa_t *spa, uint64_t lsize);
extern uint64_t spa_get_dspace(spa_t *spa);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
extern uint64_t spa_get_checkpoint_space(spa_t *spa);
extern uint64_t spa_get_slop_space(spa_t *spa);
extern void spa_update_dspace(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern uint64_t spa_version(spa_t *spa);
extern boolean_t spa_deflate(spa_t *spa);
extern metaslab_class_t *spa_normal_class(spa_t *spa);
extern metaslab_class_t *spa_log_class(spa_t *spa);
extern metaslab_class_t *spa_special_class(spa_t *spa);
extern metaslab_class_t *spa_dedup_class(spa_t *spa);
extern metaslab_class_t *spa_preferred_class(spa_t *spa, uint64_t size,
dmu_object_type_t objtype, uint_t level, uint_t special_smallblk);
extern void spa_evicting_os_register(spa_t *, objset_t *os);
extern void spa_evicting_os_deregister(spa_t *, objset_t *os);
extern void spa_evicting_os_wait(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern int spa_max_replication(spa_t *spa);
extern int spa_prev_software_version(spa_t *spa);
Extend deadman logic The intent of this patch is extend the existing deadman code such that it's flexible enough to be used by both ztest and on production systems. The proposed changes include: * Added a new `zfs_deadman_failmode` module option which is used to dynamically control the behavior of the deadman. It's loosely modeled after, but independant from, the pool failmode property. It can be set to wait, continue, or panic. * wait - Wait for the "hung" I/O (default) * continue - Attempt to recover from a "hung" I/O * panic - Panic the system * Added a new `zfs_deadman_ziotime_ms` module option which is analogous to `zfs_deadman_synctime_ms` except instead of applying to a pool TXG sync it applies to zio_wait(). A default value of 300s is used to define a "hung" zio. * The ztest deadman thread has been re-enabled by default, aligned with the upstream OpenZFS code, and then extended to terminate the process when it takes significantly longer to complete than expected. * The -G option was added to ztest to print the internal debug log when a fatal error is encountered. This same option was previously added to zdb in commit fa603f82. Update zloop.sh to unconditionally pass -G to obtain additional debugging. * The FM_EREPORT_ZFS_DELAY event which was previously posted when the deadman detect a "hung" pool has been replaced by a new dedicated FM_EREPORT_ZFS_DEADMAN event. * The proposed recovery logic attempts to restart a "hung" zio by calling zio_interrupt() on any outstanding leaf zios. We may want to further restrict this to zios in either the ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages. Calling zio_interrupt() is expected to only be useful for cases when an IO has been submitted to the physical device but for some reasonable the completion callback hasn't been called by the lower layers. This shouldn't be possible but has been observed and may be caused by kernel/driver bugs. * The 'zfs_deadman_synctime_ms' default value was reduced from 1000s to 600s. * Depending on how ztest fails there may be no cache file to move. This should not be considered fatal, collect the logs which are available and carry on. * Add deadman test cases for spa_deadman() and zio_wait(). * Increase default zfs_deadman_checktime_ms to 60s. Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6999
2017-12-18 22:06:07 +00:00
extern uint64_t spa_get_failmode(spa_t *spa);
extern uint64_t spa_get_deadman_failmode(spa_t *spa);
extern void spa_set_deadman_failmode(spa_t *spa, const char *failmode);
extern boolean_t spa_suspended(spa_t *spa);
extern uint64_t spa_bootfs(spa_t *spa);
extern uint64_t spa_delegation(spa_t *spa);
extern objset_t *spa_meta_objset(spa_t *spa);
extern uint64_t spa_deadman_synctime(spa_t *spa);
Extend deadman logic The intent of this patch is extend the existing deadman code such that it's flexible enough to be used by both ztest and on production systems. The proposed changes include: * Added a new `zfs_deadman_failmode` module option which is used to dynamically control the behavior of the deadman. It's loosely modeled after, but independant from, the pool failmode property. It can be set to wait, continue, or panic. * wait - Wait for the "hung" I/O (default) * continue - Attempt to recover from a "hung" I/O * panic - Panic the system * Added a new `zfs_deadman_ziotime_ms` module option which is analogous to `zfs_deadman_synctime_ms` except instead of applying to a pool TXG sync it applies to zio_wait(). A default value of 300s is used to define a "hung" zio. * The ztest deadman thread has been re-enabled by default, aligned with the upstream OpenZFS code, and then extended to terminate the process when it takes significantly longer to complete than expected. * The -G option was added to ztest to print the internal debug log when a fatal error is encountered. This same option was previously added to zdb in commit fa603f82. Update zloop.sh to unconditionally pass -G to obtain additional debugging. * The FM_EREPORT_ZFS_DELAY event which was previously posted when the deadman detect a "hung" pool has been replaced by a new dedicated FM_EREPORT_ZFS_DEADMAN event. * The proposed recovery logic attempts to restart a "hung" zio by calling zio_interrupt() on any outstanding leaf zios. We may want to further restrict this to zios in either the ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages. Calling zio_interrupt() is expected to only be useful for cases when an IO has been submitted to the physical device but for some reasonable the completion callback hasn't been called by the lower layers. This shouldn't be possible but has been observed and may be caused by kernel/driver bugs. * The 'zfs_deadman_synctime_ms' default value was reduced from 1000s to 600s. * Depending on how ztest fails there may be no cache file to move. This should not be considered fatal, collect the logs which are available and carry on. * Add deadman test cases for spa_deadman() and zio_wait(). * Increase default zfs_deadman_checktime_ms to 60s. Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6999
2017-12-18 22:06:07 +00:00
extern uint64_t spa_deadman_ziotime(spa_t *spa);
extern uint64_t spa_dirty_data(spa_t *spa);
2008-11-20 20:01:55 +00:00
/* Miscellaneous support routines */
extern void spa_load_failed(spa_t *spa, const char *fmt, ...);
extern void spa_load_note(spa_t *spa, const char *fmt, ...);
extern void spa_activate_mos_feature(spa_t *spa, const char *feature,
dmu_tx_t *tx);
extern void spa_deactivate_mos_feature(spa_t *spa, const char *feature);
extern spa_t *spa_by_guid(uint64_t pool_guid, uint64_t device_guid);
2008-11-20 20:01:55 +00:00
extern boolean_t spa_guid_exists(uint64_t pool_guid, uint64_t device_guid);
extern char *spa_strdup(const char *);
extern void spa_strfree(char *);
extern uint64_t spa_get_random(uint64_t range);
extern uint64_t spa_generate_guid(spa_t *spa);
extern void snprintf_blkptr(char *buf, size_t buflen, const blkptr_t *bp);
2008-11-20 20:01:55 +00:00
extern void spa_freeze(spa_t *spa);
extern int spa_change_guid(spa_t *spa);
2008-11-20 20:01:55 +00:00
extern void spa_upgrade(spa_t *spa, uint64_t version);
extern void spa_evict_all(void);
extern vdev_t *spa_lookup_by_guid(spa_t *spa, uint64_t guid,
boolean_t l2cache);
2008-11-20 20:01:55 +00:00
extern boolean_t spa_has_spare(spa_t *, uint64_t guid);
extern uint64_t dva_get_dsize_sync(spa_t *spa, const dva_t *dva);
extern uint64_t bp_get_dsize_sync(spa_t *spa, const blkptr_t *bp);
extern uint64_t bp_get_dsize(spa_t *spa, const blkptr_t *bp);
2008-11-20 20:01:55 +00:00
extern boolean_t spa_has_slogs(spa_t *spa);
extern boolean_t spa_is_root(spa_t *spa);
2009-01-15 21:59:39 +00:00
extern boolean_t spa_writeable(spa_t *spa);
extern boolean_t spa_has_pending_synctask(spa_t *spa);
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
extern int spa_maxblocksize(spa_t *spa);
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
extern int spa_maxdnodesize(spa_t *spa);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
extern boolean_t spa_has_checkpoint(spa_t *spa);
extern boolean_t spa_importing_readonly_checkpoint(spa_t *spa);
extern boolean_t spa_suspend_async_destroy(spa_t *spa);
extern uint64_t spa_min_claim_txg(spa_t *spa);
extern void zfs_blkptr_verify(spa_t *spa, const blkptr_t *bp);
OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recovery Some work has been done lately to improve the debugability of the ZFS pool load (and import) process. This includes: 7638 Refactor spa_load_impl into several functions 8961 SPA load/import should tell us why it failed 7277 zdb should be able to print zfs_dbgmsg's To iterate on top of that, there's a few changes that were made to make the import process more resilient and crash free. One of the first tasks during the pool load process is to parse a config provided from userland that describes what devices the pool is composed of. A vdev tree is generated from that config, and then all the vdevs are opened. The Meta Object Set (MOS) of the pool is accessed, and several metadata objects that are necessary to load the pool are read. The exact configuration of the pool is also stored inside the MOS. Since the configuration provided from userland is external and might not accurately describe the vdev tree of the pool at the txg that is being loaded, it cannot be relied upon to safely operate the pool. For that reason, the configuration in the MOS is read early on. In the past, the two configurations were compared together and if there was a mismatch then the load process was aborted and an error was returned. The latter was a good way to ensure a pool does not get corrupted, however it made the pool load process needlessly fragile in cases where the vdev configuration changed or the userland configuration was outdated. Since the MOS is stored in 3 copies, the configuration provided by userland doesn't have to be perfect in order to read its contents. Hence, a new approach has been adopted: The pool is first opened with the untrusted userland configuration just so that the real configuration can be read from the MOS. The trusted MOS configuration is then used to generate a new vdev tree and the pool is re-opened. When the pool is opened with an untrusted configuration, writes are disabled to avoid accidentally damaging it. During reads, some sanity checks are performed on block pointers to see if each DVA points to a known vdev; when the configuration is untrusted, instead of panicking the system if those checks fail we simply avoid issuing reads to the invalid DVAs. This new two-step pool load process now allows rewinding pools accross vdev tree changes such as device replacement, addition, etc. Loading a pool from an external config file in a clustering environment also becomes much safer now since the pool will import even if the config is outdated and didn't, for instance, register a recent device addition. With this code in place, it became relatively easy to implement a long-sought-after feature: the ability to import a pool with missing top level (i.e. non-redundant) devices. Note that since this almost guarantees some loss of data, this feature is for now restricted to a read-only import. Porting notes (ZTS): * Fix 'make dist' target in zpool_import * The maximum path length allowed by tar is 99 characters. Several of the new test cases exceeded this limit resulting in them not being included in the tarball. Shorten the names slightly. * Set/get tunables using accessor functions. * Get last synced txg via the "zfs_txg_history" mechanism. * Clear zinject handlers in cleanup for import_cache_device_replaced and import_rewind_device_replaced in order that the zpool can be exported if there is an error. * Increase FILESIZE to 8G in zfs-test.sh to allow for a larger ext4 file system to be created on ZFS_DISK2. Also, there's no need to partition ZFS_DISK2 at all. The partitioning had already been disabled for multipath devices. Among other things, the partitioning steals some space from the ext4 file system, makes it difficult to accurately calculate the paramters to parted and can make some of the tests fail. * Increase FS_SIZE and FILE_SIZE in the zpool_import test configuration now that FILESIZE is larger. * Write more data in order that device evacuation take lonnger in a couple tests. * Use mkdir -p to avoid errors when the directory already exists. * Remove use of sudo in import_rewind_config_changed. Authored by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Andrew Stormont <andyjstormont@gmail.com> Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9075 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123 Closes #7459
2016-07-22 14:39:36 +00:00
extern boolean_t zfs_dva_valid(spa_t *spa, const dva_t *dva,
const blkptr_t *bp);
OpenZFS 7614, 9064 - zfs device evacuation/removal OpenZFS 7614 - zfs device evacuation/removal OpenZFS 9064 - remove_mirror should wait for device removal to complete This project allows top-level vdevs to be removed from the storage pool with "zpool remove", reducing the total amount of storage in the pool. This operation copies all allocated regions of the device to be removed onto other devices, recording the mapping from old to new location. After the removal is complete, read and free operations to the removed (now "indirect") vdev must be remapped and performed at the new location on disk. The indirect mapping table is kept in memory whenever the pool is loaded, so there is minimal performance overhead when doing operations on the indirect vdev. The size of the in-memory mapping table will be reduced when its entries become "obsolete" because they are no longer used by any block pointers in the pool. An entry becomes obsolete when all the blocks that use it are freed. An entry can also become obsolete when all the snapshots that reference it are deleted, and the block pointers that reference it have been "remapped" in all filesystems/zvols (and clones). Whenever an indirect block is written, all the block pointers in it will be "remapped" to their new (concrete) locations if possible. This process can be accelerated by using the "zfs remap" command to proactively rewrite all indirect blocks that reference indirect (removed) vdevs. Note that when a device is removed, we do not verify the checksum of the data that is copied. This makes the process much faster, but if it were used on redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy the wrong data, when we have the correct data on e.g. the other side of the mirror. At the moment, only mirrors and simple top-level vdevs can be removed and no removal is allowed if any of the top-level vdevs are raidz. Porting Notes: * Avoid zero-sized kmem_alloc() in vdev_compact_children(). The device evacuation code adds a dependency that vdev_compact_children() be able to properly empty the vdev_child array by setting it to NULL and zeroing vdev_children. Under Linux, kmem_alloc() and related functions return a sentinel pointer rather than NULL for zero-sized allocations. * Remove comment regarding "mpt" driver where zfs_remove_max_segment is initialized to SPA_MAXBLOCKSIZE. Change zfs_condense_indirect_commit_entry_delay_ticks to zfs_condense_indirect_commit_entry_delay_ms for consistency with most other tunables in which delays are specified in ms. * ZTS changes: Use set_tunable rather than mdb Use zpool sync as appropriate Use sync_pool instead of sync Kill jobs during test_removal_with_operation to allow unmount/export Don't add non-disk names such as "mirror" or "raidz" to $DISKS Use $TEST_BASE_DIR instead of /tmp Increase HZ from 100 to 1000 which is more common on Linux removal_multiple_indirection.ksh Reduce iterations in order to not time out on the code coverage builders. removal_resume_export: Functionally, the test case is correct but there exists a race where the kernel thread hasn't been fully started yet and is not visible. Wait for up to 1 second for the removal thread to be started before giving up on it. Also, increase the amount of data copied in order that the removal not finish before the export has a chance to fail. * MMP compatibility, the concept of concrete versus non-concrete devices has slightly changed the semantics of vdev_writeable(). Update mmp_random_leaf_impl() accordingly. * Updated dbuf_remap() to handle the org.zfsonlinux:large_dnode pool feature which is not supported by OpenZFS. * Added support for new vdev removal tracepoints. * Test cases removal_with_zdb and removal_condense_export have been intentionally disabled. When run manually they pass as intended, but when running in the automated test environment they produce unreliable results on the latest Fedora release. They may work better once the upstream pool import refectoring is merged into ZoL at which point they will be re-enabled. Authored by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Alex Reece <alex@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Richard Laager <rlaager@wiktel.com> Reviewed by: Tim Chase <tim@chase2k.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/7614 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/f539f1eb Closes #6900
2016-09-22 16:30:13 +00:00
typedef void (*spa_remap_cb_t)(uint64_t vdev, uint64_t offset, uint64_t size,
void *arg);
extern boolean_t spa_remap_blkptr(spa_t *spa, blkptr_t *bp,
spa_remap_cb_t callback, void *arg);
extern uint64_t spa_get_last_removal_txg(spa_t *spa);
OpenZFS 9075 - Improve ZFS pool import/load process and corrupted pool recovery Some work has been done lately to improve the debugability of the ZFS pool load (and import) process. This includes: 7638 Refactor spa_load_impl into several functions 8961 SPA load/import should tell us why it failed 7277 zdb should be able to print zfs_dbgmsg's To iterate on top of that, there's a few changes that were made to make the import process more resilient and crash free. One of the first tasks during the pool load process is to parse a config provided from userland that describes what devices the pool is composed of. A vdev tree is generated from that config, and then all the vdevs are opened. The Meta Object Set (MOS) of the pool is accessed, and several metadata objects that are necessary to load the pool are read. The exact configuration of the pool is also stored inside the MOS. Since the configuration provided from userland is external and might not accurately describe the vdev tree of the pool at the txg that is being loaded, it cannot be relied upon to safely operate the pool. For that reason, the configuration in the MOS is read early on. In the past, the two configurations were compared together and if there was a mismatch then the load process was aborted and an error was returned. The latter was a good way to ensure a pool does not get corrupted, however it made the pool load process needlessly fragile in cases where the vdev configuration changed or the userland configuration was outdated. Since the MOS is stored in 3 copies, the configuration provided by userland doesn't have to be perfect in order to read its contents. Hence, a new approach has been adopted: The pool is first opened with the untrusted userland configuration just so that the real configuration can be read from the MOS. The trusted MOS configuration is then used to generate a new vdev tree and the pool is re-opened. When the pool is opened with an untrusted configuration, writes are disabled to avoid accidentally damaging it. During reads, some sanity checks are performed on block pointers to see if each DVA points to a known vdev; when the configuration is untrusted, instead of panicking the system if those checks fail we simply avoid issuing reads to the invalid DVAs. This new two-step pool load process now allows rewinding pools accross vdev tree changes such as device replacement, addition, etc. Loading a pool from an external config file in a clustering environment also becomes much safer now since the pool will import even if the config is outdated and didn't, for instance, register a recent device addition. With this code in place, it became relatively easy to implement a long-sought-after feature: the ability to import a pool with missing top level (i.e. non-redundant) devices. Note that since this almost guarantees some loss of data, this feature is for now restricted to a read-only import. Porting notes (ZTS): * Fix 'make dist' target in zpool_import * The maximum path length allowed by tar is 99 characters. Several of the new test cases exceeded this limit resulting in them not being included in the tarball. Shorten the names slightly. * Set/get tunables using accessor functions. * Get last synced txg via the "zfs_txg_history" mechanism. * Clear zinject handlers in cleanup for import_cache_device_replaced and import_rewind_device_replaced in order that the zpool can be exported if there is an error. * Increase FILESIZE to 8G in zfs-test.sh to allow for a larger ext4 file system to be created on ZFS_DISK2. Also, there's no need to partition ZFS_DISK2 at all. The partitioning had already been disabled for multipath devices. Among other things, the partitioning steals some space from the ext4 file system, makes it difficult to accurately calculate the paramters to parted and can make some of the tests fail. * Increase FS_SIZE and FILE_SIZE in the zpool_import test configuration now that FILESIZE is larger. * Write more data in order that device evacuation take lonnger in a couple tests. * Use mkdir -p to avoid errors when the directory already exists. * Remove use of sudo in import_rewind_config_changed. Authored by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Andrew Stormont <andyjstormont@gmail.com> Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9075 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/619c0123 Closes #7459
2016-07-22 14:39:36 +00:00
extern boolean_t spa_trust_config(spa_t *spa);
extern uint64_t spa_missing_tvds_allowed(spa_t *spa);
extern void spa_set_missing_tvds(spa_t *spa, uint64_t missing);
OpenZFS 9166 - zfs storage pool checkpoint Details about the motivation of this feature and its usage can be found in this blogpost: https://sdimitro.github.io/post/zpool-checkpoint/ A lightning talk of this feature can be found here: https://www.youtube.com/watch?v=fPQA8K40jAM Implementation details can be found in big block comment of spa_checkpoint.c Side-changes that are relevant to this commit but not explained elsewhere: * renames members of "struct metaslab trees to be shorter without losing meaning * space_map_{alloc,truncate}() accept a block size as a parameter. The reason is that in the current state all space maps that we allocate through the DMU use a global tunable (space_map_blksz) which defauls to 4KB. This is ok for metaslab space maps in terms of bandwirdth since they are scattered all over the disk. But for other space maps this default is probably not what we want. Examples are device removal's vdev_obsolete_sm or vdev_chedkpoint_sm from this review. Both of these have a 1:1 relationship with each vdev and could benefit from a bigger block size. Porting notes: * The part of dsl_scan_sync() which handles async destroys has been moved into the new dsl_process_async_destroys() function. * Remove "VERIFY(!(flags & FWRITE))" in "kernel.c" so zhack can write to block device backed pools. * ZTS: * Fix get_txg() in zpool_sync_001_pos due to "checkpoint_txg". * Don't use large dd block sizes on /dev/urandom under Linux in checkpoint_capacity. * Adopt Delphix-OS's setting of 4 (spa_asize_inflation = SPA_DVAS_PER_BP + 1) for the checkpoint_capacity test to speed its attempts to fill the pool * Create the base and nested pools with sync=disabled to speed up the "setup" phase. * Clear labels in test pool between checkpoint tests to avoid duplicate pool issues. * The import_rewind_device_replaced test has been marked as "known to fail" for the reasons listed in its DISCLAIMER. * New module parameters: zfs_spa_discard_memory_limit, zfs_remove_max_bytes_pause (not documented - debugging only) vdev_max_ms_count (formerly metaslabs_per_vdev) vdev_min_ms_count Authored by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://illumos.org/issues/9166 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7159fdb8 Closes #7570
2016-12-16 22:11:29 +00:00
extern boolean_t spa_top_vdevs_spacemap_addressable(spa_t *spa);
Multi-modifier protection (MMP) Add multihost=on|off pool property to control MMP. When enabled a new thread writes uberblocks to the last slot in each label, at a set frequency, to indicate to other hosts the pool is actively imported. These uberblocks are the last synced uberblock with an updated timestamp. Property defaults to off. During tryimport, find the "best" uberblock (newest txg and timestamp) repeatedly, checking for change in the found uberblock. Include the results of the activity test in the config returned by tryimport. These results are reported to user in "zpool import". Allow the user to control the period between MMP writes, and the duration of the activity test on import, via a new module parameter zfs_multihost_interval. The period is specified in milliseconds. The activity test duration is calculated from this value, and from the mmp_delay in the "best" uberblock found initially. Add a kstat interface to export statistics about Multiple Modifier Protection (MMP) updates. Include the last synced txg number, the timestamp, the delay since the last MMP update, the VDEV GUID, the VDEV label that received the last MMP update, and the VDEV path. Abbreviated output below. $ cat /proc/spl/kstat/zfs/mypool/multihost 31 0 0x01 10 880 105092382393521 105144180101111 txg timestamp mmp_delay vdev_guid vdev_label vdev_path 20468 261337 250274925 68396651780 3 /dev/sda 20468 261339 252023374 6267402363293 1 /dev/sdc 20468 261340 252000858 6698080955233 1 /dev/sdx 20468 261341 251980635 783892869810 2 /dev/sdy 20468 261342 253385953 8923255792467 3 /dev/sdd 20468 261344 253336622 042125143176 0 /dev/sdab 20468 261345 253310522 1200778101278 2 /dev/sde 20468 261346 253286429 0950576198362 2 /dev/sdt 20468 261347 253261545 96209817917 3 /dev/sds 20468 261349 253238188 8555725937673 3 /dev/sdb Add a new tunable zfs_multihost_history to specify the number of MMP updates to store history for. By default it is set to zero meaning that no MMP statistics are stored. When using ztest to generate activity, for automated tests of the MMP function, some test functions interfere with the test. For example, the pool is exported to run zdb and then imported again. Add a new ztest function, "-M", to alter ztest behavior to prevent this. Add new tests to verify the new functionality. Tests provided by Giuseppe Di Natale. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #745 Closes #6279
2017-07-08 03:20:35 +00:00
extern boolean_t spa_multihost(spa_t *spa);
extern unsigned long spa_get_hostid(void);
extern void spa_activate_allocation_classes(spa_t *, dmu_tx_t *);
2009-01-15 21:59:39 +00:00
extern int spa_mode(spa_t *spa);
extern uint64_t zfs_strtonum(const char *str, char **nptr);
2008-11-20 20:01:55 +00:00
extern char *spa_his_ievent_table[];
extern void spa_history_create_obj(spa_t *spa, dmu_tx_t *tx);
extern int spa_history_get(spa_t *spa, uint64_t *offset, uint64_t *len_read,
char *his_buf);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
extern int spa_history_log(spa_t *spa, const char *his_buf);
extern int spa_history_log_nvl(spa_t *spa, nvlist_t *nvl);
extern void spa_history_log_version(spa_t *spa, const char *operation,
dmu_tx_t *tx);
Illumos #2882, #2883, #2900 2882 implement libzfs_core 2883 changing "canmount" property to "on" should not always remount dataset 2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Chris Siden <christopher.siden@delphix.com> Reviewed by: Garrett D'Amore <garrett@damore.org> Reviewed by: Bill Pijewski <wdp@joyent.com> Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com> Approved by: Eric Schrock <Eric.Schrock@delphix.com> References: https://www.illumos.org/issues/2882 https://www.illumos.org/issues/2883 https://www.illumos.org/issues/2900 illumos/illumos-gate@4445fffbbb1ea25fd0e9ea68b9380dd7a6709025 Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1293 Porting notes: WARNING: This patch changes the user/kernel ABI. That means that the zfs/zpool utilities built from master are NOT compatible with the 0.6.2 kernel modules. Ensure you load the matching kernel modules from master after updating the utilities. Otherwise the zfs/zpool commands will be unable to interact with your pool and you will see errors similar to the following: $ zpool list failed to read pool configuration: bad address no pools available $ zfs list no datasets available Add zvol minor device creation to the new zfs_snapshot_nvl function. Remove the logging of the "release" operation in dsl_dataset_user_release_sync(). The logging caused a null dereference because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the logging functions try to get the ds name via the dsl_dataset_name() function. I've got no idea why this particular code would have worked in Illumos. This code has subsequently been completely reworked in Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring). Squash some "may be used uninitialized" warning/erorrs. Fix some printf format warnings for %lld and %llu. Apply a few spa_writeable() changes that were made to Illumos in illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and 3115 fixes. Add a missing call to fnvlist_free(nvl) in log_internal() that was added in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time (zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-08-28 11:45:09 +00:00
extern void spa_history_log_internal(spa_t *spa, const char *operation,
dmu_tx_t *tx, const char *fmt, ...);
extern void spa_history_log_internal_ds(struct dsl_dataset *ds, const char *op,
dmu_tx_t *tx, const char *fmt, ...);
extern void spa_history_log_internal_dd(dsl_dir_t *dd, const char *operation,
dmu_tx_t *tx, const char *fmt, ...);
2008-11-20 20:01:55 +00:00
extern const char *spa_state_to_name(spa_t *spa);
2008-11-20 20:01:55 +00:00
/* error handling */
struct zbookmark_phys;
Native Encryption for ZFS on Linux This change incorporates three major pieces: The first change is a keystore that manages wrapping and encryption keys for encrypted datasets. These commands mostly involve manipulating the new DSL Crypto Key ZAP Objects that live in the MOS. Each encrypted dataset has its own DSL Crypto Key that is protected with a user's key. This level of indirection allows users to change their keys without re-encrypting their entire datasets. The change implements the new subcommands "zfs load-key", "zfs unload-key" and "zfs change-key" which allow the user to manage their encryption keys and settings. In addition, several new flags and properties have been added to allow dataset creation and to make mounting and unmounting more convenient. The second piece of this patch provides the ability to encrypt, decyrpt, and authenticate protected datasets. Each object set maintains a Merkel tree of Message Authentication Codes that protect the lower layers, similarly to how checksums are maintained. This part impacts the zio layer, which handles the actual encryption and generation of MACs, as well as the ARC and DMU, which need to be able to handle encrypted buffers and protected data. The last addition is the ability to do raw, encrypted sends and receives. The idea here is to send raw encrypted and compressed data and receive it exactly as is on a backup system. This means that the dataset on the receiving system is protected using the same user key that is in use on the sending side. By doing so, datasets can be efficiently backed up to an untrusted system without fear of data being compromised. Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Closes #494 Closes #5769
2017-08-14 17:36:48 +00:00
extern void spa_log_error(spa_t *spa, const zbookmark_phys_t *zb);
2008-11-20 20:01:55 +00:00
extern void zfs_ereport_post(const char *class, spa_t *spa, vdev_t *vd,
const zbookmark_phys_t *zb, zio_t *zio, uint64_t stateoroffset,
uint64_t length);
extern nvlist_t *zfs_event_create(spa_t *spa, vdev_t *vd, const char *type,
const char *name, nvlist_t *aux);
2008-11-20 20:01:55 +00:00
extern void zfs_post_remove(spa_t *spa, vdev_t *vd);
extern void zfs_post_state_change(spa_t *spa, vdev_t *vd, uint64_t laststate);
2008-11-20 20:01:55 +00:00
extern void zfs_post_autoreplace(spa_t *spa, vdev_t *vd);
extern uint64_t spa_get_errlog_size(spa_t *spa);
extern int spa_get_errlog(spa_t *spa, void *uaddr, size_t *count);
extern void spa_errlog_rotate(spa_t *spa);
extern void spa_errlog_drain(spa_t *spa);
extern void spa_errlog_sync(spa_t *spa, uint64_t txg);
extern void spa_get_errlists(spa_t *spa, avl_tree_t *last, avl_tree_t *scrub);
/* vdev cache */
extern void vdev_cache_stat_init(void);
extern void vdev_cache_stat_fini(void);
/* vdev mirror */
extern void vdev_mirror_stat_init(void);
extern void vdev_mirror_stat_fini(void);
2008-11-20 20:01:55 +00:00
/* Initialization and termination */
extern void spa_init(int flags);
extern void spa_fini(void);
extern void spa_boot_init(void);
2008-11-20 20:01:55 +00:00
/* properties */
extern int spa_prop_set(spa_t *spa, nvlist_t *nvp);
extern int spa_prop_get(spa_t *spa, nvlist_t **nvp);
extern void spa_prop_clear_bootfs(spa_t *spa, uint64_t obj, dmu_tx_t *tx);
2009-02-18 20:51:31 +00:00
extern void spa_configfile_set(spa_t *, nvlist_t *, boolean_t);
2008-11-20 20:01:55 +00:00
/* asynchronous event notification */
extern void spa_event_notify(spa_t *spa, vdev_t *vdev, nvlist_t *hist_nvl,
const char *name);
2008-11-20 20:01:55 +00:00
#ifdef ZFS_DEBUG
#define dprintf_bp(bp, fmt, ...) do { \
if (zfs_flags & ZFS_DEBUG_DPRINTF) { \
char *__blkbuf = kmem_alloc(BP_SPRINTF_LEN, KM_SLEEP); \
snprintf_blkptr(__blkbuf, BP_SPRINTF_LEN, (bp)); \
dprintf(fmt " %s\n", __VA_ARGS__, __blkbuf); \
kmem_free(__blkbuf, BP_SPRINTF_LEN); \
2008-11-20 20:01:55 +00:00
} \
_NOTE(CONSTCOND) } while (0)
#else
#define dprintf_bp(bp, fmt, ...)
#endif
2009-01-15 21:59:39 +00:00
extern int spa_mode_global; /* mode, e.g. FREAD | FWRITE */
Extend deadman logic The intent of this patch is extend the existing deadman code such that it's flexible enough to be used by both ztest and on production systems. The proposed changes include: * Added a new `zfs_deadman_failmode` module option which is used to dynamically control the behavior of the deadman. It's loosely modeled after, but independant from, the pool failmode property. It can be set to wait, continue, or panic. * wait - Wait for the "hung" I/O (default) * continue - Attempt to recover from a "hung" I/O * panic - Panic the system * Added a new `zfs_deadman_ziotime_ms` module option which is analogous to `zfs_deadman_synctime_ms` except instead of applying to a pool TXG sync it applies to zio_wait(). A default value of 300s is used to define a "hung" zio. * The ztest deadman thread has been re-enabled by default, aligned with the upstream OpenZFS code, and then extended to terminate the process when it takes significantly longer to complete than expected. * The -G option was added to ztest to print the internal debug log when a fatal error is encountered. This same option was previously added to zdb in commit fa603f82. Update zloop.sh to unconditionally pass -G to obtain additional debugging. * The FM_EREPORT_ZFS_DELAY event which was previously posted when the deadman detect a "hung" pool has been replaced by a new dedicated FM_EREPORT_ZFS_DEADMAN event. * The proposed recovery logic attempts to restart a "hung" zio by calling zio_interrupt() on any outstanding leaf zios. We may want to further restrict this to zios in either the ZIO_STAGE_VDEV_IO_START or ZIO_STAGE_VDEV_IO_DONE stages. Calling zio_interrupt() is expected to only be useful for cases when an IO has been submitted to the physical device but for some reasonable the completion callback hasn't been called by the lower layers. This shouldn't be possible but has been observed and may be caused by kernel/driver bugs. * The 'zfs_deadman_synctime_ms' default value was reduced from 1000s to 600s. * Depending on how ztest fails there may be no cache file to move. This should not be considered fatal, collect the logs which are available and carry on. * Add deadman test cases for spa_deadman() and zio_wait(). * Increase default zfs_deadman_checktime_ms to 60s. Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6999
2017-12-18 22:06:07 +00:00
extern int zfs_deadman_enabled;
extern unsigned long zfs_deadman_synctime_ms;
extern unsigned long zfs_deadman_ziotime_ms;
extern unsigned long zfs_deadman_checktime_ms;
2008-11-20 20:01:55 +00:00
#ifdef __cplusplus
}
#endif
#endif /* _SYS_SPA_H */