Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/rpm/generic/zfs.spec.in

442 lines
16 KiB
RPMSpec
Raw Normal View History

Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%global _sbindir /sbin
%global _libdir /%{_lib}
Accept udev and dracut paths specified by ./configure There are two common locations where udev and dracut components are commonly installed. When building packages using the 'make rpm|deb' targets check those common locations and pass them to rpmbuild. For non-standard configurations these values can be provided by the the following configure options: --with-udevdir=DIR install udev helpers [default=check] --with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]] --with-dracutdir=DIR install dracut helpers [default=check] When rebuilding using the source packages the per-distribution default values specified in the spec file will be used. This is the preferred way to build packages for a distribution but the ability to override the defaults is provided as a convenience. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2310 Closes #1680
2014-06-06 14:07:58 +00:00
# Set the default udev directory based on distribution.
Fix zfs.spec.in defaults Commit 2ee4e7da accidentally introduced two issues which only occur when rebuilding the ZFS source rpm outside the ZFS build system. 1) The _dracutdir, _udevdir, and _udevruledir macros must be checked using the 'undefined' keyword. This was just overlooked in the patch review and does not cause a failure when using 'make pkg' because the values are provided by the make target. 2) The default _udevruledir path included a typo. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2310
2014-06-12 20:11:26 +00:00
%if %{undefined _udevdir}
Accept udev and dracut paths specified by ./configure There are two common locations where udev and dracut components are commonly installed. When building packages using the 'make rpm|deb' targets check those common locations and pass them to rpmbuild. For non-standard configurations these values can be provided by the the following configure options: --with-udevdir=DIR install udev helpers [default=check] --with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]] --with-dracutdir=DIR install dracut helpers [default=check] When rebuilding using the source packages the per-distribution default values specified in the spec file will be used. This is the preferred way to build packages for a distribution but the ability to override the defaults is provided as a convenience. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2310 Closes #1680
2014-06-06 14:07:58 +00:00
%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7 || 0%{?centos} >= 7
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%global _udevdir %{_prefix}/lib/udev
%else
%global _udevdir /lib/udev
Accept udev and dracut paths specified by ./configure There are two common locations where udev and dracut components are commonly installed. When building packages using the 'make rpm|deb' targets check those common locations and pass them to rpmbuild. For non-standard configurations these values can be provided by the the following configure options: --with-udevdir=DIR install udev helpers [default=check] --with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]] --with-dracutdir=DIR install dracut helpers [default=check] When rebuilding using the source packages the per-distribution default values specified in the spec file will be used. This is the preferred way to build packages for a distribution but the ability to override the defaults is provided as a convenience. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2310 Closes #1680
2014-06-06 14:07:58 +00:00
%endif
%endif
# Set the default udevrule directory based on distribution.
Fix zfs.spec.in defaults Commit 2ee4e7da accidentally introduced two issues which only occur when rebuilding the ZFS source rpm outside the ZFS build system. 1) The _dracutdir, _udevdir, and _udevruledir macros must be checked using the 'undefined' keyword. This was just overlooked in the patch review and does not cause a failure when using 'make pkg' because the values are provided by the make target. 2) The default _udevruledir path included a typo. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2310
2014-06-12 20:11:26 +00:00
%if %{undefined _udevruledir}
Accept udev and dracut paths specified by ./configure There are two common locations where udev and dracut components are commonly installed. When building packages using the 'make rpm|deb' targets check those common locations and pass them to rpmbuild. For non-standard configurations these values can be provided by the the following configure options: --with-udevdir=DIR install udev helpers [default=check] --with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]] --with-dracutdir=DIR install dracut helpers [default=check] When rebuilding using the source packages the per-distribution default values specified in the spec file will be used. This is the preferred way to build packages for a distribution but the ability to override the defaults is provided as a convenience. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2310 Closes #1680
2014-06-06 14:07:58 +00:00
%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7 || 0%{?centos} >= 7
Fix zfs.spec.in defaults Commit 2ee4e7da accidentally introduced two issues which only occur when rebuilding the ZFS source rpm outside the ZFS build system. 1) The _dracutdir, _udevdir, and _udevruledir macros must be checked using the 'undefined' keyword. This was just overlooked in the patch review and does not cause a failure when using 'make pkg' because the values are provided by the make target. 2) The default _udevruledir path included a typo. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2310
2014-06-12 20:11:26 +00:00
%global _udevruledir %{_prefix}/lib/udev/rules.d
Accept udev and dracut paths specified by ./configure There are two common locations where udev and dracut components are commonly installed. When building packages using the 'make rpm|deb' targets check those common locations and pass them to rpmbuild. For non-standard configurations these values can be provided by the the following configure options: --with-udevdir=DIR install udev helpers [default=check] --with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]] --with-dracutdir=DIR install dracut helpers [default=check] When rebuilding using the source packages the per-distribution default values specified in the spec file will be used. This is the preferred way to build packages for a distribution but the ability to override the defaults is provided as a convenience. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2310 Closes #1680
2014-06-06 14:07:58 +00:00
%else
Fix zfs.spec.in defaults Commit 2ee4e7da accidentally introduced two issues which only occur when rebuilding the ZFS source rpm outside the ZFS build system. 1) The _dracutdir, _udevdir, and _udevruledir macros must be checked using the 'undefined' keyword. This was just overlooked in the patch review and does not cause a failure when using 'make pkg' because the values are provided by the make target. 2) The default _udevruledir path included a typo. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2310
2014-06-12 20:11:26 +00:00
%global _udevruledir /lib/udev/rules.d
Accept udev and dracut paths specified by ./configure There are two common locations where udev and dracut components are commonly installed. When building packages using the 'make rpm|deb' targets check those common locations and pass them to rpmbuild. For non-standard configurations these values can be provided by the the following configure options: --with-udevdir=DIR install udev helpers [default=check] --with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]] --with-dracutdir=DIR install dracut helpers [default=check] When rebuilding using the source packages the per-distribution default values specified in the spec file will be used. This is the preferred way to build packages for a distribution but the ability to override the defaults is provided as a convenience. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2310 Closes #1680
2014-06-06 14:07:58 +00:00
%endif
%endif
# Set the default dracut directory based on distribution.
Fix zfs.spec.in defaults Commit 2ee4e7da accidentally introduced two issues which only occur when rebuilding the ZFS source rpm outside the ZFS build system. 1) The _dracutdir, _udevdir, and _udevruledir macros must be checked using the 'undefined' keyword. This was just overlooked in the patch review and does not cause a failure when using 'make pkg' because the values are provided by the make target. 2) The default _udevruledir path included a typo. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2310
2014-06-12 20:11:26 +00:00
%if %{undefined _dracutdir}
Accept udev and dracut paths specified by ./configure There are two common locations where udev and dracut components are commonly installed. When building packages using the 'make rpm|deb' targets check those common locations and pass them to rpmbuild. For non-standard configurations these values can be provided by the the following configure options: --with-udevdir=DIR install udev helpers [default=check] --with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]] --with-dracutdir=DIR install dracut helpers [default=check] When rebuilding using the source packages the per-distribution default values specified in the spec file will be used. This is the preferred way to build packages for a distribution but the ability to override the defaults is provided as a convenience. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2310 Closes #1680
2014-06-06 14:07:58 +00:00
%if 0%{?fedora} >= 17 || 0%{?rhel} >= 7 || 0%{?centos} >= 7
%global _dracutdir %{_prefix}/lib/dracut
%else
Cause zfs.spec to place dracut files properly This is an extension of commit ffb2111. As the fedora conditional has been added, this allows centos/rhel-6 to fall back to the proper directory (/usr/share/dracut) Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1984
2013-12-18 02:33:40 +00:00
%global _dracutdir %{_prefix}/share/dracut
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%endif
Accept udev and dracut paths specified by ./configure There are two common locations where udev and dracut components are commonly installed. When building packages using the 'make rpm|deb' targets check those common locations and pass them to rpmbuild. For non-standard configurations these values can be provided by the the following configure options: --with-udevdir=DIR install udev helpers [default=check] --with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]] --with-dracutdir=DIR install dracut helpers [default=check] When rebuilding using the source packages the per-distribution default values specified in the spec file will be used. This is the preferred way to build packages for a distribution but the ability to override the defaults is provided as a convenience. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2310 Closes #1680
2014-06-06 14:07:58 +00:00
%endif
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
Set default _initconfdir directory The _initconfdir macro is normally provided by global rpm macros file for use in the spec file. However, older distributions such as CentOS 6 do not define it. To prevent a build failure in this case the spec file has been updated to use a reasonable default when the value is undefined. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3617
2015-07-20 20:16:16 +00:00
# Set the default _initconfdir when undefined.
%if %{undefined _initconfdir}
%global _initconfdir /etc/sysconfig
%endif
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%bcond_with debug
%bcond_with blkid
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%bcond_with systemd
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
# Generic enable switch for systemd
%if %{with systemd}
%define _systemd 1
%endif
Update spec file to enable systemd for RHEL7 Signed-off-by: Ben Allen <bsallen@alcf.anl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2355
2014-06-02 20:04:57 +00:00
# RHEL >= 7 comes with systemd
%if 0%{?rhel} >= 7
%define _systemd 1
%endif
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
# Fedora >= 15 comes with systemd, but only >= 18 has
# the proper macros
%if 0%{?fedora} >= 18
%define _systemd 1
%endif
# opensuse >= 12.1 comes with systemd, but only >= 13.1
# has the proper macros
%if 0%{?suse_version} >= 1310
%define _systemd 1
%endif
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
Name: @PACKAGE@
Version: @VERSION@
Release: @RELEASE@%{?dist}
Summary: Commands to control the kernel modules and libraries
Group: System Environment/Kernel
License: @ZFS_META_LICENSE@
URL: http://zfsonlinux.org/
Source0: %{name}-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
Add missing dependencies The spl, zfs-test, and zfs-dracut packages should be pulled in by the core zfs package. This allows all the required zfs packages to be installed from a yum repository by running: yum install zfs Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-03-20 02:25:01 +00:00
Requires: spl = %{version}
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
Requires: libzpool2 = %{version}
Requires: libnvpair1 = %{version}
Requires: libuutil1 = %{version}
Requires: libzfs2 = %{version}
Tighten zfs dependency on zfs-kmod Make zfs depend on the same version of zfs-kmod, rather than on same or better. When yum repository contains a number of versions the dependency resolution breaks on trying to install non-latest version. Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1677
2013-08-26 06:04:38 +00:00
Requires: %{name}-kmod = %{version}
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
Provides: %{name}-kmod-common = %{version}
Add explicit Conflicts for zfs-fuse packages zfs-fuse provides the same commands and man page names as ZoL. Changing the names on either side would make each incompatible with all existing documentation about ZFS. Providing bit identical files is not possible due to differing codebases. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1866
2014-02-08 21:48:53 +00:00
# zfs-fuse provides the same commands and man pages that ZoL does. Renaming
# those on either side would conflict with all available documentation.
Conflicts: zfs-fuse
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%if 0%{?rhel}%{?fedora}%{?suse_version}
BuildRequires: zlib-devel
BuildRequires: libuuid-devel
%if %{with blkid}
BuildRequires: libblkid-devel
%endif
%endif
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%if 0%{?_systemd}
Requires(post): systemd
Requires(preun): systemd
Requires(postun): systemd
BuildRequires: systemd
%endif
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%description
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
This package contains the ZFS command line utilities.
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
%package -n libzpool2
Summary: Native ZFS pool library for Linux
Group: System Environment/Kernel
%description -n libzpool2
This package contains the zpool library, which provides support
for managing zpools
Fix typo in %post scriptlet lines Missing space made the %post directive be part of the package %description and not have a %post scriptlet defined. Signed-off-by: Andy Bakun <github@thwartedefforts.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2961
2014-12-15 04:23:25 +00:00
%post -n libzpool2 -p /sbin/ldconfig
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
%postun -n libzpool2 -p /sbin/ldconfig
%package -n libnvpair1
Summary: Solaris name-value library for Linux
Group: System Environment/Kernel
%description -n libnvpair1
This package contains routines for packing and unpacking name-value
pairs. This functionality is used to portably transport data across
process boundaries, between kernel and user space, and can be used
to write self describing data structures on disk.
Fix typo in %post scriptlet lines Missing space made the %post directive be part of the package %description and not have a %post scriptlet defined. Signed-off-by: Andy Bakun <github@thwartedefforts.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2961
2014-12-15 04:23:25 +00:00
%post -n libnvpair1 -p /sbin/ldconfig
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
%postun -n libnvpair1 -p /sbin/ldconfig
%package -n libuutil1
Summary: Solaris userland utility library for Linux
Group: System Environment/Kernel
%description -n libuutil1
This library provides a variety of compatibility functions for ZFS on Linux:
* libspl: The Solaris Porting Layer userland library, which provides APIs
that make it possible to run Solaris user code in a Linux environment
with relatively minimal modification.
* libavl: The Adelson-Velskii Landis balanced binary tree manipulation
library.
* libefi: The Extensible Firmware Interface library for GUID disk
partitioning.
* libshare: NFS, SMB, and iSCSI service integration for ZFS.
Fix typo in %post scriptlet lines Missing space made the %post directive be part of the package %description and not have a %post scriptlet defined. Signed-off-by: Andy Bakun <github@thwartedefforts.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2961
2014-12-15 04:23:25 +00:00
%post -n libuutil1 -p /sbin/ldconfig
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
%postun -n libuutil1 -p /sbin/ldconfig
%package -n libzfs2
Summary: Native ZFS filesystem library for Linux
Group: System Environment/Kernel
%description -n libzfs2
This package provides support for managing ZFS filesystems
Fix typo in %post scriptlet lines Missing space made the %post directive be part of the package %description and not have a %post scriptlet defined. Signed-off-by: Andy Bakun <github@thwartedefforts.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2961
2014-12-15 04:23:25 +00:00
%post -n libzfs2 -p /sbin/ldconfig
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
%postun -n libzfs2 -p /sbin/ldconfig
%package -n libzfs2-devel
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
Summary: Development headers
Group: System Environment/Kernel
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
Requires: libzfs2 = %{version}
Requires: libzpool2 = %{version}
Requires: libnvpair1 = %{version}
Requires: libuutil1 = %{version}
Provides: libzpool2-devel
Provides: libnvpair1-devel
Provides: libuutil1-devel
Obsoletes: zfs-devel
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
%description -n libzfs2-devel
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
This package contains the header files needed for building additional
applications against the ZFS libraries.
%package test
Summary: Test infrastructure
Group: System Environment/Kernel
Requires: %{name}%{?_isa} = %{version}-%{release}
Requires: parted
Requires: lsscsi
Requires: mdadm
Requires: bc
%description test
This package contains test infrastructure and support scripts for
validating the file system.
%package dracut
Summary: Dracut module
Group: System Environment/Kernel
Requires: %{name}%{?_isa} = %{version}-%{release}
Requires: dracut
%description dracut
This package contains a dracut module used to construct an initramfs
image which is ZFS aware.
Initramfs scripts for ZoL. * Supports booting of a ZFS snapshot. Do this by cloning the snapshot into a dataset. If this, the resulting dataset, already exists, destroy it. Then mount it on root. * If snapshot does not exist, use base dataset (the part before '@') as boot filesystem instead. * If no snapshot is specified on the 'root=' kernel command line, but there is an '@', then get a list of snapshots below that filesystem and ask the user which to use. * Clone with 'mountpoint=none' and 'canmount=noauto' - we mount manually and explicitly. * For sub-filesystems, that doesn't have a mountpoint property set, we use the 'org.zol:mountpoint' to keep track of it's mountpoint. * Allow rollback of snapshots instead of clone it and boot from the clone. * Allow mounting a root- and subfs with mountpoint=legacy set * Allow mounting a filesystem which is using nativ encryption. * Support all currently used kernel command line arguments All the different distributions have their own standard on what to specify on the kernel command line to boot of a ZFS filesystem. * Extra options: * zfsdebug=(on,yes,1) Show extra debugging information * zfsforce=(on,yes,1) Force import the pool * rollback=(on,yes,1) Rollback (instead of clone) the snapshot * Only try to import pool if it haven't already been imported * This will negate the need to force import a pool that have not been exported cleanly. * Support exclusion of pools to import by setting ZFS_POOL_EXCEPTIONS in /etc/default/zfs. * Support additional configuration variable ZFS_INITRD_ADDITIONAL_DATASETS to mount additional filesystems not located under your root dataset. * Include /etc/modprobe.d/{zfs,spl}.conf in the initrd if it/they exist. * Include the udev rule to use by-vdev for pool imports. * Include the /etc/default/zfs file to the initrd. * Only try /dev/disk/by-* in the initrd if USE_DISK_BY_ID is set. * Use /dev/disk/by-vdev before anything. * Add /dev as a last ditch attempt. * Fallback to using the cache file if that exist if nothing else worked. * Use /sbin/modprobe instead of built-in (BusyBox) modprobe. This gets rid of the message "modprobe: can't load module zcommon". Thanx to pcoultha for finding this. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2116 Closes #2114
2014-01-30 16:26:48 +00:00
%if 0%{?_initramfs}
%package initramfs
Summary: Initramfs module
Group: System Environment/Kernel
Requires: %{name}%{?_isa} = %{version}-%{release}
Requires: %{name} = %{version}-%{release}
Requires: initramfs-tools
%description initramfs
This package contains a initramfs module used to construct an initramfs
image which is ZFS aware.
%endif
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%prep
%if %{with debug}
%define debug --enable-debug
%else
%define debug --disable-debug
%endif
%if %{with blkid}
%define blkid --with-blkid
%else
%define blkid --without-blkid
%endif
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%if 0%{?_systemd}
%define systemd --enable-systemd --with-systemdunitdir=%{_unitdir} --with-systemdpresetdir=%{_presetdir} --disable-sysvinit
%else
%define systemd --enable-sysvinit --disable-systemd
%endif
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%setup -q
%build
%configure \
--with-config=user \
--with-udevdir=%{_udevdir} \
Accept udev and dracut paths specified by ./configure There are two common locations where udev and dracut components are commonly installed. When building packages using the 'make rpm|deb' targets check those common locations and pass them to rpmbuild. For non-standard configurations these values can be provided by the the following configure options: --with-udevdir=DIR install udev helpers [default=check] --with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]] --with-dracutdir=DIR install dracut helpers [default=check] When rebuilding using the source packages the per-distribution default values specified in the spec file will be used. This is the preferred way to build packages for a distribution but the ability to override the defaults is provided as a convenience. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2310 Closes #1680
2014-06-06 14:07:58 +00:00
--with-udevruledir=%{_udevruledir} \
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
--with-dracutdir=%{_dracutdir} \
--disable-static \
%{debug} \
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%{blkid} \
%{systemd}
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
make %{?_smp_mflags}
%install
%{__rm} -rf $RPM_BUILD_ROOT
make install DESTDIR=%{?buildroot}
find %{?buildroot}%{_libdir} -name '*.la' -exec rm -f {} \;
Add conditional chkconfig to packaging Prior to adopting the kmod style packaging the zfs packages would conditionally invoke /sbin/chkconfig to create the proper links for the init script. This is done conditionally because many distributions are moving away from SysV style init scripts and we don't want to cause errors on those. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1376
2013-07-03 23:12:37 +00:00
%post
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%if 0%{?_systemd}
%systemd_post zfs.target
%else
Base init scripts for SYSV systems * Based on the init scripts included with Debian GNU/Linux, then take code from the already existing ones, trying to merge them into one set of scripts that will work for 'everyone' for better maintainability. * Add configurable variables to control the workings of the init scripts: * ZFS_INITRD_PRE_MOUNTROOT_SLEEP Set a sleep time before we load the module (used primarily by initrd scripts to allow for slower media (such as USB devices etc) to be availible before we load the zfs module). * ZFS_INITRD_POST_MODPROBE_SLEEP Set a timed sleep in the initrd to after the load of the zfs module. * ZFS_INITRD_ADDITIONAL_DATASETS To allow for mounting additional datasets in the initrd. Primarily used in initrd scripts to allow for when filesystem needed to boot (such as /usr, /opt, /var etc) isn't directly under the root dataset. * ZFS_POOL_EXCEPTIONS Exclude pools from being imported (in the initrd and/or init scripts). * ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP Set to control how dkms should build the dkms packages. * ZPOOL_IMPORT_PATH Set path(s) where "zpool import" should import pools from. This was previously the job of "USE_DISK_BY_ID" (which is still used for backwards compatibility) but was renamed to allow for better control of import path(s). * If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side. * ZED_ARGS To allow for local options to zed without having to change the init script. * The import function, do_import(), imports pools by name instead of '-a' for better control of pools to import and from where. * If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes' then ignore it. * If pool(s) isn't found with a simple "zpool import" (seen it happen), try looking for them in /dev/disk/by-id (if it exists). Any duplicates (pools found with both commands) is filtered out. * IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID so that the first, simple "zpool import $pool" is able to find it. * Fallback on importing the pool using the cache file (if it exists) only if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in' defaults) didn't work. * The export function, do_export(), will export all pools imported, EXCEPT the root pool (if there is one). * ZED script from the Debian GNU/Linux packages added. * Refreshed ZED init script from behlendorf@5e7a660 to be portable so it may be used on both LSB and Redhat style systems. * If there is no pool(s) imported and zed successfully shut down, we will unload the zfs modules. * The function library file for the ZoL init script is installed as /etc/init.d/zfs-functions. * The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file as well as the common function library is tagged as '%config(noreplace)' in the rpm rules file to make sure they are not replaced automatically if locally modifed. * Pitfals and workarounds: * If we're running from init, remove stale /etc/dfs/sharetab before importing pools in the zfs-import init script. * On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically everything quite early in the shutdown phase and zed is/should be stopped much later than that. We don't want zed to be among the ones killed, so add the zed pid to list of pids for 'sendsigs' to ignore. * CentOS uses echo_success() and echo_failure() to print out status of command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose colour etc. This doesn't work with the modified IFS variable we need to use in zfs-import for some reason, so work around that when we define zfs_log_{end,failure}_msg() for RedHat and derivative distributions. * All scripts passes ShellCheck (with one false positive in do_mount()). Signed-off-by: Turbo Fredriksson turbo@bayour.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Richard Yao <ryao@gentoo.org> Reviewed by: Chris Dunlap <cdunlap@llnl.gov> Closes #2974 Closes #2107
2015-04-23 18:35:45 +00:00
if [ -x /sbin/chkconfig ]; then
/sbin/chkconfig --add zfs-import
/sbin/chkconfig --add zfs-mount
/sbin/chkconfig --add zfs-share
/sbin/chkconfig --add zfs-zed
fi
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%endif
Add conditional chkconfig to packaging Unconditionally exit with zero to avoid returning failures from the scriptlets. This should have been part of the previous ba661a6 commit. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1376
2013-07-04 04:38:45 +00:00
exit 0
Add conditional chkconfig to packaging Prior to adopting the kmod style packaging the zfs packages would conditionally invoke /sbin/chkconfig to create the proper links for the init script. This is done conditionally because many distributions are moving away from SysV style init scripts and we don't want to cause errors on those. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1376
2013-07-03 23:12:37 +00:00
%preun
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%if 0%{?_systemd}
%systemd_preun zfs.target
%else
Base init scripts for SYSV systems * Based on the init scripts included with Debian GNU/Linux, then take code from the already existing ones, trying to merge them into one set of scripts that will work for 'everyone' for better maintainability. * Add configurable variables to control the workings of the init scripts: * ZFS_INITRD_PRE_MOUNTROOT_SLEEP Set a sleep time before we load the module (used primarily by initrd scripts to allow for slower media (such as USB devices etc) to be availible before we load the zfs module). * ZFS_INITRD_POST_MODPROBE_SLEEP Set a timed sleep in the initrd to after the load of the zfs module. * ZFS_INITRD_ADDITIONAL_DATASETS To allow for mounting additional datasets in the initrd. Primarily used in initrd scripts to allow for when filesystem needed to boot (such as /usr, /opt, /var etc) isn't directly under the root dataset. * ZFS_POOL_EXCEPTIONS Exclude pools from being imported (in the initrd and/or init scripts). * ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP Set to control how dkms should build the dkms packages. * ZPOOL_IMPORT_PATH Set path(s) where "zpool import" should import pools from. This was previously the job of "USE_DISK_BY_ID" (which is still used for backwards compatibility) but was renamed to allow for better control of import path(s). * If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side. * ZED_ARGS To allow for local options to zed without having to change the init script. * The import function, do_import(), imports pools by name instead of '-a' for better control of pools to import and from where. * If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes' then ignore it. * If pool(s) isn't found with a simple "zpool import" (seen it happen), try looking for them in /dev/disk/by-id (if it exists). Any duplicates (pools found with both commands) is filtered out. * IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID so that the first, simple "zpool import $pool" is able to find it. * Fallback on importing the pool using the cache file (if it exists) only if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in' defaults) didn't work. * The export function, do_export(), will export all pools imported, EXCEPT the root pool (if there is one). * ZED script from the Debian GNU/Linux packages added. * Refreshed ZED init script from behlendorf@5e7a660 to be portable so it may be used on both LSB and Redhat style systems. * If there is no pool(s) imported and zed successfully shut down, we will unload the zfs modules. * The function library file for the ZoL init script is installed as /etc/init.d/zfs-functions. * The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file as well as the common function library is tagged as '%config(noreplace)' in the rpm rules file to make sure they are not replaced automatically if locally modifed. * Pitfals and workarounds: * If we're running from init, remove stale /etc/dfs/sharetab before importing pools in the zfs-import init script. * On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically everything quite early in the shutdown phase and zed is/should be stopped much later than that. We don't want zed to be among the ones killed, so add the zed pid to list of pids for 'sendsigs' to ignore. * CentOS uses echo_success() and echo_failure() to print out status of command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose colour etc. This doesn't work with the modified IFS variable we need to use in zfs-import for some reason, so work around that when we define zfs_log_{end,failure}_msg() for RedHat and derivative distributions. * All scripts passes ShellCheck (with one false positive in do_mount()). Signed-off-by: Turbo Fredriksson turbo@bayour.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Richard Yao <ryao@gentoo.org> Reviewed by: Chris Dunlap <cdunlap@llnl.gov> Closes #2974 Closes #2107
2015-04-23 18:35:45 +00:00
if [ $1 -eq 0 ] && [ -x /sbin/chkconfig ]; then
/sbin/chkconfig --del zfs-import
/sbin/chkconfig --del zfs-mount
/sbin/chkconfig --del zfs-share
/sbin/chkconfig --del zfs-zed
Add conditional chkconfig to packaging Prior to adopting the kmod style packaging the zfs packages would conditionally invoke /sbin/chkconfig to create the proper links for the init script. This is done conditionally because many distributions are moving away from SysV style init scripts and we don't want to cause errors on those. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1376
2013-07-03 23:12:37 +00:00
fi
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%endif
Add conditional chkconfig to packaging Unconditionally exit with zero to avoid returning failures from the scriptlets. This should have been part of the previous ba661a6 commit. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1376
2013-07-04 04:38:45 +00:00
exit 0
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%postun
%if 0%{?_systemd}
%systemd_postun zfs.target
%endif
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%files
%{_sbindir}/*
Modified arcstat.py to run on linux * Modified kstat_update() to read arcstats from proc. * Fix shebang. * Added Makefile.am entries for arcstat.py Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1506
2013-06-07 04:33:01 +00:00
%{_bindir}/*
Initial implementation of zed (ZFS Event Daemon) zed monitors ZFS events. When a zevent is posted, zed will run any scripts that have been enabled for the corresponding zevent class. Multiple scripts may be invoked for a given zevent. The zevent nvpairs are passed to the scripts as environment variables. Events are processed synchronously by the single thread, and there is no maximum timeout for script execution. Consequently, a misbehaving script can delay (or forever block) the processing of subsequent zevents. Plans are to address this in future commits. Initial scripts have been developed to log events to syslog and send email in response to checksum/data/io errors and resilver.finish/scrub.finish events. By default, email will only be sent if the ZED_EMAIL variable is configured in zed.rc (which is serving as a config file of sorts until a proper configuration file is implemented). Signed-off-by: Chris Dunlap <cdunlap@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2
2014-01-21 21:30:03 +00:00
%{_libexecdir}/%{name}
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%{_mandir}/man1/*
%{_mandir}/man5/*
%{_mandir}/man8/*
%{_udevdir}/vdev_id
%{_udevdir}/zvol_id
%{_udevdir}/rules.d/*
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%if 0%{?_systemd}
/usr/lib/modules-load.d/*
%{_unitdir}/*
%{_presetdir}/*
%else
Base init scripts for SYSV systems * Based on the init scripts included with Debian GNU/Linux, then take code from the already existing ones, trying to merge them into one set of scripts that will work for 'everyone' for better maintainability. * Add configurable variables to control the workings of the init scripts: * ZFS_INITRD_PRE_MOUNTROOT_SLEEP Set a sleep time before we load the module (used primarily by initrd scripts to allow for slower media (such as USB devices etc) to be availible before we load the zfs module). * ZFS_INITRD_POST_MODPROBE_SLEEP Set a timed sleep in the initrd to after the load of the zfs module. * ZFS_INITRD_ADDITIONAL_DATASETS To allow for mounting additional datasets in the initrd. Primarily used in initrd scripts to allow for when filesystem needed to boot (such as /usr, /opt, /var etc) isn't directly under the root dataset. * ZFS_POOL_EXCEPTIONS Exclude pools from being imported (in the initrd and/or init scripts). * ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP Set to control how dkms should build the dkms packages. * ZPOOL_IMPORT_PATH Set path(s) where "zpool import" should import pools from. This was previously the job of "USE_DISK_BY_ID" (which is still used for backwards compatibility) but was renamed to allow for better control of import path(s). * If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side. * ZED_ARGS To allow for local options to zed without having to change the init script. * The import function, do_import(), imports pools by name instead of '-a' for better control of pools to import and from where. * If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes' then ignore it. * If pool(s) isn't found with a simple "zpool import" (seen it happen), try looking for them in /dev/disk/by-id (if it exists). Any duplicates (pools found with both commands) is filtered out. * IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID so that the first, simple "zpool import $pool" is able to find it. * Fallback on importing the pool using the cache file (if it exists) only if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in' defaults) didn't work. * The export function, do_export(), will export all pools imported, EXCEPT the root pool (if there is one). * ZED script from the Debian GNU/Linux packages added. * Refreshed ZED init script from behlendorf@5e7a660 to be portable so it may be used on both LSB and Redhat style systems. * If there is no pool(s) imported and zed successfully shut down, we will unload the zfs modules. * The function library file for the ZoL init script is installed as /etc/init.d/zfs-functions. * The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file as well as the common function library is tagged as '%config(noreplace)' in the rpm rules file to make sure they are not replaced automatically if locally modifed. * Pitfals and workarounds: * If we're running from init, remove stale /etc/dfs/sharetab before importing pools in the zfs-import init script. * On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically everything quite early in the shutdown phase and zed is/should be stopped much later than that. We don't want zed to be among the ones killed, so add the zed pid to list of pids for 'sendsigs' to ignore. * CentOS uses echo_success() and echo_failure() to print out status of command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose colour etc. This doesn't work with the modified IFS variable we need to use in zfs-import for some reason, so work around that when we define zfs_log_{end,failure}_msg() for RedHat and derivative distributions. * All scripts passes ShellCheck (with one false positive in do_mount()). Signed-off-by: Turbo Fredriksson turbo@bayour.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Richard Yao <ryao@gentoo.org> Reviewed by: Chris Dunlap <cdunlap@llnl.gov> Closes #2974 Closes #2107
2015-04-23 18:35:45 +00:00
%config(noreplace) %{_sysconfdir}/init.d/*
%config(noreplace) %{_initconfdir}/zfs
Add systemd unit files for ZFS startup This adds systemd unit files replacing the functionality offered by the SysV init script found in etc/init.d. It has been developed and tested on Fedora 19, Fedora 20 and openSuSE 13.1. Four unit files and one target are offered. zfs-import-cache.service: Import pools from /etc/zfs/zpool.cache. This unit will wait for udev to settle. zfs-import-scan.service: Import pools by scanning /dev/disk/by-id for zvols. This unit will only run if /etc/zfs/zpool.cache is not present. This unit will wait for udev to settle zfs-mount.service: Mount ZFS native filesystems. It contains a dependency to be loaded before local-fs.target. zfs-share.service: Share NFS/SMB filesystems. This unit contains a dependency that will cause it to be restarted whenever the smb or nfs-server unit is restarted, restoring the shares added. zfs.target: This target pulls in the other units in order to start ZFS. It's the only unit that can be enabled/disabled, all other services are static and pulled in by dependencies. It will honour zfs=off and zfs=no options on the kernel command line. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2108
2014-01-19 14:36:49 +00:00
%endif
Base init scripts for SYSV systems * Based on the init scripts included with Debian GNU/Linux, then take code from the already existing ones, trying to merge them into one set of scripts that will work for 'everyone' for better maintainability. * Add configurable variables to control the workings of the init scripts: * ZFS_INITRD_PRE_MOUNTROOT_SLEEP Set a sleep time before we load the module (used primarily by initrd scripts to allow for slower media (such as USB devices etc) to be availible before we load the zfs module). * ZFS_INITRD_POST_MODPROBE_SLEEP Set a timed sleep in the initrd to after the load of the zfs module. * ZFS_INITRD_ADDITIONAL_DATASETS To allow for mounting additional datasets in the initrd. Primarily used in initrd scripts to allow for when filesystem needed to boot (such as /usr, /opt, /var etc) isn't directly under the root dataset. * ZFS_POOL_EXCEPTIONS Exclude pools from being imported (in the initrd and/or init scripts). * ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP Set to control how dkms should build the dkms packages. * ZPOOL_IMPORT_PATH Set path(s) where "zpool import" should import pools from. This was previously the job of "USE_DISK_BY_ID" (which is still used for backwards compatibility) but was renamed to allow for better control of import path(s). * If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side. * ZED_ARGS To allow for local options to zed without having to change the init script. * The import function, do_import(), imports pools by name instead of '-a' for better control of pools to import and from where. * If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes' then ignore it. * If pool(s) isn't found with a simple "zpool import" (seen it happen), try looking for them in /dev/disk/by-id (if it exists). Any duplicates (pools found with both commands) is filtered out. * IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID so that the first, simple "zpool import $pool" is able to find it. * Fallback on importing the pool using the cache file (if it exists) only if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in' defaults) didn't work. * The export function, do_export(), will export all pools imported, EXCEPT the root pool (if there is one). * ZED script from the Debian GNU/Linux packages added. * Refreshed ZED init script from behlendorf@5e7a660 to be portable so it may be used on both LSB and Redhat style systems. * If there is no pool(s) imported and zed successfully shut down, we will unload the zfs modules. * The function library file for the ZoL init script is installed as /etc/init.d/zfs-functions. * The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file as well as the common function library is tagged as '%config(noreplace)' in the rpm rules file to make sure they are not replaced automatically if locally modifed. * Pitfals and workarounds: * If we're running from init, remove stale /etc/dfs/sharetab before importing pools in the zfs-import init script. * On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically everything quite early in the shutdown phase and zed is/should be stopped much later than that. We don't want zed to be among the ones killed, so add the zed pid to list of pids for 'sendsigs' to ignore. * CentOS uses echo_success() and echo_failure() to print out status of command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose colour etc. This doesn't work with the modified IFS variable we need to use in zfs-import for some reason, so work around that when we define zfs_log_{end,failure}_msg() for RedHat and derivative distributions. * All scripts passes ShellCheck (with one false positive in do_mount()). Signed-off-by: Turbo Fredriksson turbo@bayour.com Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed by: Richard Yao <ryao@gentoo.org> Reviewed by: Chris Dunlap <cdunlap@llnl.gov> Closes #2974 Closes #2107
2015-04-23 18:35:45 +00:00
%config(noreplace) %{_sysconfdir}/%{name}
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
%files -n libzpool2
%{_libdir}/libzpool.so.*
%files -n libnvpair1
%{_libdir}/libnvpair.so.*
%files -n libuutil1
%{_libdir}/libuutil.so.*
%files -n libzfs2
%{_libdir}/libzfs*.so.*
%files -n libzfs2-devel
Add a pkgconfig file Providing a pkg-config file makes is easy for 3rd party applications to link against the libzfs libraries. It also allows the libzfs developers to modify the list of required libraries and cflags without breaking existing applications. The following example illustrates how pkg-config can be used: cc `pkg-config --cflags --libs libzfs` -o myapp myapp.c /* * myapp.c */ void main() { libzfs_handle_t *hdl; hdl = libzfs_init(); if (hdl) libzfs_fini(hdl); } Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #585
2014-06-06 23:23:22 +00:00
%{_datadir}/pkgconfig/libzfs.pc
%{_datadir}/pkgconfig/libzfs_core.pc
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%{_libdir}/*.so
%{_includedir}/*
Move the libraries into separate packages From day one the various ZFS libraries should have been placed in their own sub-packages. Primarily this allows for multiple major versions of the libraries to be concurrently installed. It also facilitates a smaller build environment by minimizing the required dependencies. The specific changes required to split the libraries from the utilities are as follows: * libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added and contain the versioned shared libraries. The Fedora packaging guidelines discourage providing static libraries so they are not included in the packages. http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries * The zfs-devel package was renamed libzfs2-devel and the new package obsoletes the old zfs-devel package. This package includes all the required headers for the libzpool2, libnvpair1, libuutil1, and libzfs2 libraries and their respective unversioned shared libraries. This package should eventually be split in to individual lib*-devel packages but it will still take some work to cleanly separate them. Therefore the libzfs2-devel package provides the expected lib*-devel packages so the all proper dependencies can still be created. http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages * Moved '/sbin/ldconfig' execution from the zfs packge to each of the new library packages as described by the packaging guidelines. http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries * The /usr/share/doc/ files were moved in to the libzfs2-devel package. * Updated config/deb.am to be aware of the packaging changes. This ensures that 'deb-utils' make target converts all the resulting packages generated by the 'rpm-utils' target. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes: #2329 Closes: #2341 Issue: #2145
2014-05-17 11:20:59 +00:00
%doc AUTHORS COPYRIGHT DISCLAIMER
%doc OPENSOLARIS.LICENSE README.markdown
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%files test
%{_datadir}/%{name}
%files dracut
Move dracut directory to contrib The dracut code is analogous to the initramfs code and as such it should be located in the contrib with initramfs for consistency. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-07-09 18:41:14 +00:00
%doc contrib/dracut/README.dracut.markdown
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%{_dracutdir}/modules.d/*
Initramfs scripts for ZoL. * Supports booting of a ZFS snapshot. Do this by cloning the snapshot into a dataset. If this, the resulting dataset, already exists, destroy it. Then mount it on root. * If snapshot does not exist, use base dataset (the part before '@') as boot filesystem instead. * If no snapshot is specified on the 'root=' kernel command line, but there is an '@', then get a list of snapshots below that filesystem and ask the user which to use. * Clone with 'mountpoint=none' and 'canmount=noauto' - we mount manually and explicitly. * For sub-filesystems, that doesn't have a mountpoint property set, we use the 'org.zol:mountpoint' to keep track of it's mountpoint. * Allow rollback of snapshots instead of clone it and boot from the clone. * Allow mounting a root- and subfs with mountpoint=legacy set * Allow mounting a filesystem which is using nativ encryption. * Support all currently used kernel command line arguments All the different distributions have their own standard on what to specify on the kernel command line to boot of a ZFS filesystem. * Extra options: * zfsdebug=(on,yes,1) Show extra debugging information * zfsforce=(on,yes,1) Force import the pool * rollback=(on,yes,1) Rollback (instead of clone) the snapshot * Only try to import pool if it haven't already been imported * This will negate the need to force import a pool that have not been exported cleanly. * Support exclusion of pools to import by setting ZFS_POOL_EXCEPTIONS in /etc/default/zfs. * Support additional configuration variable ZFS_INITRD_ADDITIONAL_DATASETS to mount additional filesystems not located under your root dataset. * Include /etc/modprobe.d/{zfs,spl}.conf in the initrd if it/they exist. * Include the udev rule to use by-vdev for pool imports. * Include the /etc/default/zfs file to the initrd. * Only try /dev/disk/by-* in the initrd if USE_DISK_BY_ID is set. * Use /dev/disk/by-vdev before anything. * Add /dev as a last ditch attempt. * Fallback to using the cache file if that exist if nothing else worked. * Use /sbin/modprobe instead of built-in (BusyBox) modprobe. This gets rid of the message "modprobe: can't load module zcommon". Thanx to pcoultha for finding this. Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2116 Closes #2114
2014-01-30 16:26:48 +00:00
%if 0%{?_initramfs}
%files initramfs
%doc contrib/initramfs/README.initramfs.markdown
/usr/share/initramfs-tools/*
%else
# Since we're not building the initramfs package,
# ignore those files.
%exclude /usr/share/initramfs-tools
%endif
Refresh RPM packaging Refresh the existing RPM packaging to conform to the 'Fedora Packaging Guidelines'. This includes adopting the kmods2 packaging standard which is used fod kmods distributed by rpmfusion for Fedora/RHEL. http://fedoraproject.org/wiki/Packaging:Guidelines http://rpmfusion.org/Packaging/KernelModules/Kmods2 While the spec files have been entirely rewritten from a user perspective the only major changes are: * The Fedora packages now have a build dependency on the rpmfusion repositories. The generic kmod packages also have a new dependency on kmodtool-1.22 but it is bundled with the source rpm so no additional packages are needed. * The kernel binary module packages have been renamed from zfs-modules-* to kmod-zfs-* as specificed by kmods2. * The is now a common kmod-zfs-devel-* package in addition to the per-kernel devel packages. The common package contains the development headers while the per-kernel package contains kernel specific build products. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1341
2013-02-17 20:10:17 +00:00
%changelog
Prepare to release 0.6.5.8 META file and RPM release log updated. Signed-off-by: Ned Bass <bass6@llnl.gov>
2016-08-26 00:22:19 +00:00
* Fri Sep 9 2016 Ned Bass <bass6@llnl.gov> - 0.6.5.8-1
- Linux 4.6, 4.7 and 4.8 compatibility zfsonlinux/spl#549 zfsonlinux/spl#563 zfsonlinux/spl#565 zfsonlinux/spl#566 zfsonlinux/zfs#4664 zfsonlinux/zfs#4665 zfsonlinux/zfs#4717 zfsonlinux/zfs#4726 zfsonlinux/zfs#4892 zfsonlinux/zfs#4899 zfsonlinux/zfs#4922 zfsonlinux/zfs#4944 zfsonlinux/zfs#4946 zfsonlinux/zfs#4951
- Fix new tunable to ignore hole_birth, enabled by default zfsonlinux/zfs#4833
- Fix rw_tryupgrade() semantics zfsonlinux/spl#534 zfsonlinux/spl#554
- Fix taskq_wait_outstanding() re-evaluation issue zfsonlinux/spl#553
- Fix race between taskq_destroy and new spawning thread zfsonlinux/spl#550 zfsonlinux/spl#553
- Fix handle NULL case in spl_kmem_free_track() zfsonlinux/spl#567
- Fix persist vdev_resilver_txg changes zfsonlinux/zfs#4790
- Fix array bounds read in zprop_print_one_property() zfsonlinux/zfs#5003
- Fix call zfs_get_name() with invalid parameter zfsonlinux/zfs#4919
- Fix incorrect pool state after import zfsonlinux/zfs#4948
- Fix self-healing IO prior to dsl_pool_init() completion zfsonlinux/zfs#4652
- Fix stack corruption after importing a pool with a too-long name zfsonlinux/zfs@dc4abb4
- Fix deeply nested nvlist can overflow stack zfsonlinux/zfs#4924
- Fix dbuf_stats_hash_table_data race zfsonlinux/zfs#4846
- Fix NULL dereference when accessing dbuf kstat zfsonlinux/zfs#4837
- Fix NFS fh_to_dentry() should return ESTALE when generation mismatch zfsonlinux/zfs#4828
- Fix allowing accessing XATTR via export handle zfsonlinux/zfs#4828
- Fix out-of-bound access in zfs_fillpage() zfsonlinux/zfs#4705 zfsonlinux/zfs#4708
- Fix memleak in zpl_parse_options zfsonlinux/zfs#4706 zfsonlinux/zfs#4708
- Fix arc_prune_task use-after-free zfsonlinux/zfs#4687 zfsonlinux/zfs#4690
- Fix get_zfs_sb() race with concurrent umount zfsonlinux/zfs@5cff9a0
- Fix xattr parent inode pinning zfsonlinux/zfs#4359 zfsonlinux/zfs#3508 zfsonlinux/zfs#4413 zfsonlinux/zfs#4827
- Fix xattr purge during iput zfsonlinux/zfs#4359 zfsonlinux/zfs#3508 zfsonlinux/zfs#4413 zfsonlinux/zfs#4827
- Fix metaslab_free_dva(): bad DVA X:Y:Z zfsonlinux/zfs#3937
- Fix large kmem_alloc in vdev_metaslab_init zfsonlinux/zfs#4752
- Fix snapdir by skipping ctldir znode in zfs_rezget zfsonlinux/zfs#4514 zfsonlinux/zfs#4661 zfsonlinux/zfs#4672
- Fix libshare performance issue zfsonlinux/zfs#4119
- Fix ztest truncated cache file zfsonlinux/zfs#4129
- Fix obeying arc_meta_limit default size when changing arc_max zfsonlinux/zfs#4001
- Fix bug in fix_paths() zfsonlinux/zfs#4632
- Fix systemd configuration zfsonlinux/zfs#4325 zfsonlinux/zfs#4496 zfsonlinux/zfs#4658 zfsonlinux/zfs#4699
- Fix use kernel provided mutex owner zfsonlinux/spl#540
- Fix rename 'zed.service' to 'zfs-zed.service' zfsonlinux/zfs#3837
- Add support for MIPS zfsonlinux/spl#558
- Add nfs-kernel-server for Debian zfsonlinux/zfs#4350
- Remove HAVE_CURRENT_UMASK and HAVE_POSIX_ACL_CACHING zfsonlinux/zfs#4922
- Remove dummy znode from zvol_state zfsonlinux/zfs#4510
- Fix gcc -Warray-bounds check for dump_object() in zdb zfsonlinux/zfs#4907
- Handle block pointers with a corrupt logical size zfsonlinux/zfs#4069 zfsonlinux/zfs#4080
Prepare to tag zfs-0.6.5.7 META file and release log updated. Signed-off-by: Ned Bass <bass6@llnl.gov>
2016-03-22 23:52:15 +00:00
* Thu May 12 2016 Ned Bass <bass6@llnl.gov> - 0.6.5.7-1
- Fix user namespaces uid/gid mapping zfsonlinux/zfs#4177
- Fix ZPL miswrite of default POSIX ACL zfsonlinux/zfs#4520
- Linux 4.5 and 4.6 compatibility zfsonlinux/zfs#4537 zfsonlinux/zfs#4489
- Ensure /dev/disk/by-partlabel gets correctly populated zfsonlinux/zfs#4517
- Utilities now work reliably with newly created partitions zfsonlinux/zfs#3708
- Import now reliably uses device names stored in label zfsonlinux/zfs#3043
- Fix possible deadlock in zfs_secpolicy_write_perms ioctl zfsonlinux/zfs#4554
- Fix inverted logic on none elevator comparison zfsonlinux/zfs#4507
- Add 32 bit FS_IOC32_{GET|SET}FLAGS compat ioctls for PPC zfsonlinux/zfs#4477
Prepare to tag zfs-0.6.5.6 META file and release log updated. Signed-off-by: Ned Bass <bass6@llnl.gov>
2016-03-22 23:52:15 +00:00
* Tue Mar 22 2016 Ned Bass <bass6@llnl.gov> - 0.6.5.6-1
- Remove artificial architecture restrictions in packaging
- Add support for s390[x] zfsonlinux/zfs#4425
- Handle negative dentries in case insensitive filesystem zfsonlinux/zfs#4243
- Fix casesensitivity=insensitive deadlock zfsonlinux/zfs#4136
- Correctly parse zdb -R flag arguments zfsonlinux/zfs#4304
- Fix lock order inversion with zvol_open() zfsonlinux/zfs#3681
- Add support for asynchronous zvol minor operations zfsonlinux/zfs#2217
- Make zvol minor functionality more robust zfsonlinux/zfs#4344
- Prevent zpool_find_vdev() from truncating vdev path zfsonlinux/zfs#4312
- Add -gLP to zpool subcommands for alt vdev names zfsonlinux/zfs#4341
- Fix zpool list -v output for spares and log devices zfsonlinux/zfs#4313
Prepare to tag zfs-0.6.5.5 META file and release log updated. Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-10-13 22:35:23 +00:00
* Wed Mar 9 2016 Ned Bass <bass6@llnl.gov> - 0.6.5.5-1
- Linux 4.5 compatibility zfsonlinux/zfs#4228
- Create working debuginfo packages on Red Hat zfsonlinux/zfs#4224
- Make arc_summary.py and dbufstat.py compatible with python3
- musl libc compatibility for option parsing zfsonlinux/zfs#4222
- Prevent arc_c collapse and possible panic zfsonlinux/zfs#3904
- Prevent duplicated xattr between SA and dir zfsonlinux/zfs#4153
- Fix zsb->z_hold_mtx deadlock zfsonlinux/zfs#4106
- Prevent SA header corruption zfsonlinux/zfs#4150
Prepare to tag zfs-0.6.5.4 META file and release log updated. Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-10-13 22:35:23 +00:00
* Fri Jan 8 2016 Ned Bass <bass6@llnl.gov> - 0.6.5.4-1
- Linux 4.4 compat
- Assorted stability fixes
- Fixes for NFS-exported snapshots
- Fix kernel warning in unlock_new_inode() and deadlock
- Fix overflow in P2ROUNDUP_TYPED macro
- Fix write performance issue due to bad zfs_dirty_data_max calculation
- Fix builtin kernel builds
- Fix deadlock during direct memory reclaim
Prepare to tag zfs-0.6.5.3 META file and release log updated. Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-10-13 22:35:23 +00:00
* Tue Oct 13 2015 Ned Bass <bass6@llnl.gov> - 0.6.5.3-1
- Don't import all visible pools in zfs-import init script zfsonlinux/zfs#3777
- Fix use-after-free in vdev_disk_physio_completion zfsonlinux/zfs#3920
- Fix avl_is_empty(&dn->dn_dbufs) assertion zfsonlinux/zfs#3865
Prepare to tag zfs-0.6.5.2 META file and release log updated. Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-09-19 19:46:06 +00:00
* Wed Sep 30 2015 Ned Bass <bass6@llnl.gov> - 0.6.5.2-1
- Init script fixes zfsonlinux/zfs#3816
- Fix uioskip crash when skip to end zfsonlinux/zfs#3806 zfsonlinux/zfs#3850
- Userspace can trigger an assertion zfsonlinux/zfs#3792
- Fix quota userused underflow bug zfsonlinux/zfs#3789
- Fix performance regression from unwanted synchronous I/O zfsonlinux/zfs#3780
- Fix deadlock during ARC reclaim zfsonlinux/zfs#3808 zfsonlinux/zfs#3834
- Fix deadlock with zfs receive and clamscan zfsonlinux/zfs#3719
- Allow NFS activity to defer snapshot unmounts zfsonlinux/zfs#3794
- Linux 4.3 compatibility zfsonlinux/zfs#3799
- Zed reload fixes zfsonlinux/zfs#3773
- Fix PAX Patch/Grsec SLAB_USERCOPY panic zfsonlinux/zfs#3796
- Always remove during dkms uninstall/update zfsonlinux/spl#476
Tag zfs-0.6.5.1 META file and release log updated. Signed-off-by: Ned Bass <bass6@llnl.gov>
2015-09-19 19:46:06 +00:00
* Sat Sep 19 2015 Ned Bass <bass6@llnl.gov> - 0.6.5.1-1
- Fix zvol corruption with TRIM/discard zfsonlinux/zfs#3798
- Fix NULL as mount(2) syscall data parameter zfsonlinux/zfs#3804
- Fix xattr=sa dataset property not honored zfsonlinux/zfs#3787
Tag zfs-0.6.5 META file and release log updated. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-09-09 22:25:52 +00:00
* Fri Sep 11 2015 Brian Behlendorf <behlendorf1@llnl.gov> - 0.6.5-1
- Released 0.6.5-1, detailed release notes are available at:
- https://github.com/zfsonlinux/zfs/releases/tag/zfs-0.6.5
Tag zfs-0.6.4 META file and release log updated. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-04-09 03:16:45 +00:00
* Wed Apr 8 2015 Brian Behlendorf <behlendorf1@llnl.gov> - 0.6.4-1
- Released 0.6.4-1
Tag zfs-0.6.3 META file and release log updated. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-06-12 18:55:52 +00:00
* Thu Jun 12 2014 Brian Behlendorf <behlendorf1@llnl.gov> - 0.6.3-1
- Released 0.6.3-1
Tag zfs-0.6.2 META file and release log updated. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-08-16 22:20:07 +00:00
* Wed Aug 21 2013 Brian Behlendorf <behlendorf1@llnl.gov> - 0.6.2-1
- Released 0.6.2-1
Tag zfs-0.6.1 META file and release log updated. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-03-25 20:46:37 +00:00
* Fri Mar 22 2013 Brian Behlendorf <behlendorf1@llnl.gov> - 0.6.1-1
- First official stable release.