Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/module/splat/Makefile.in

28 lines
1.2 KiB
Makefile
Raw Normal View History

Initial commit. All spl source written up to this point wrapped in an initial reasonable autoconf style build system. This does not yet build but the configure system does appear to work properly and integrate with the kernel. Hopefully the next commit gets us back to a buildable version we can run the test suite against. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@1 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-02-26 20:36:04 +00:00
# Makefile.in for splat kernel module
Use MODULE variable in module Makefile like zfs. In zfs, each module Makefile contains a MODULE variable which contains the name of the module, and the following declarations reference this variable. In spl, there is a MODULES variable which is never used. Rename it to MODULE and use it like in zfs. This improves consistency between the two build systems. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue zfsonlinux/zfs#851
2012-07-05 08:23:42 +00:00
MODULE := splat
Breaking the world for a little bit. If anyone is going to continue working on this branch for the next few days I suggested you work off of the 0.3.1 tag. The following changes are fairly extensive and are designed to make the SPL compatible with all kernels in the range of 2.6.18-2.6.25. There were 13 relevant API changes between these releases and I have added the needed autoconf tests to check for them. However, this has not all been tested extensively. I'll sort of the breakage on Fedora Core 9 and RHEL5 this week. SPL_AC_TYPE_UINTPTR_T SPL_AC_TYPE_KMEM_CACHE_T SPL_AC_KMEM_CACHE_DESTROY_INT SPL_AC_ATOMIC_PANIC_NOTIFIER SPL_AC_3ARGS_INIT_WORK SPL_AC_2ARGS_REGISTER_SYSCTL SPL_AC_KMEM_CACHE_T SPL_AC_KMEM_CACHE_CREATE_DTOR SPL_AC_3ARG_KMEM_CACHE_CREATE_CTOR SPL_AC_SET_SHRINKER SPL_AC_PATH_IN_NAMEIDATA SPL_AC_TASK_CURR SPL_AC_CTL_UNNUMBERED git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@119 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-06-02 17:28:49 +00:00
EXTRA_CFLAGS = @KERNELCPPFLAGS@
Support custom build directories One of the neat tricks an autoconf style project is capable of is allow configurion/building in a directory other than the source directory. The major advantage to this is that you can build the project various different ways while making changes in a single source tree. For example, this project is designed to work on various different Linux distributions each of which work slightly differently. This means that changes need to verified on each of those supported distributions perferably before the change is committed to the public git repo. Using nfs and custom build directories makes this much easier. I now have a single source tree in nfs mounted on several different systems each running a supported distribution. When I make a change to the source base I suspect may break things I can concurrently build from the same source on all the systems each in their own subdirectory. wget -c http://github.com/downloads/behlendorf/spl/spl-x.y.z.tar.gz tar -xzf spl-x.y.z.tar.gz cd spl-x-y-z ------------------------- run concurrently ---------------------- <ubuntu system> <fedora system> <debian system> <rhel6 system> mkdir ubuntu mkdir fedora mkdir debian mkdir rhel6 cd ubuntu cd fedora cd debian cd rhel6 ../configure ../configure ../configure ../configure make make make make make check make check make check make check This is something the project has almost supported for a long time but finishing this support should save me lots of time.
2010-09-02 19:12:39 +00:00
EXTRA_CFLAGS += -I@abs_top_srcdir@/include
EXTRA_CFLAGS += -include @abs_top_builddir@/spl_config.h
Initial commit. All spl source written up to this point wrapped in an initial reasonable autoconf style build system. This does not yet build but the configure system does appear to work properly and integrate with the kernel. Hopefully the next commit gets us back to a buildable version we can run the test suite against. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@1 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-02-26 20:36:04 +00:00
Go through and add a header with the proper UCRL number. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@114 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-05-26 04:38:26 +00:00
# Solaris Porting LAyer Tests
Use MODULE variable in module Makefile like zfs. In zfs, each module Makefile contains a MODULE variable which contains the name of the module, and the following declarations reference this variable. In spl, there is a MODULES variable which is never used. Rename it to MODULE and use it like in zfs. This improves consistency between the two build systems. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue zfsonlinux/zfs#851
2012-07-05 08:23:42 +00:00
obj-m := $(MODULE).o
Initial commit. All spl source written up to this point wrapped in an initial reasonable autoconf style build system. This does not yet build but the configure system does appear to work properly and integrate with the kernel. Hopefully the next commit gets us back to a buildable version we can run the test suite against. git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@1 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
2008-02-26 20:36:04 +00:00
Use MODULE variable in module Makefile like zfs. In zfs, each module Makefile contains a MODULE variable which contains the name of the module, and the following declarations reference this variable. In spl, there is a MODULES variable which is never used. Rename it to MODULE and use it like in zfs. This improves consistency between the two build systems. Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue zfsonlinux/zfs#851
2012-07-05 08:23:42 +00:00
$(MODULE)-objs += @top_srcdir@/module/splat/splat-ctl.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-kmem.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-taskq.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-random.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-mutex.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-condvar.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-thread.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-rwlock.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-time.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-vnode.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-kobj.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-atomic.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-list.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-generic.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-cred.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-zlib.o
$(MODULE)-objs += @top_srcdir@/module/splat/splat-linux.o