zfs/tests/zfs-tests/cmd/libzfs_input_check/libzfs_input_check.c

1023 lines
27 KiB
C
Raw Normal View History

/*
* CDDL HEADER START
*
* This file and its contents are supplied under the terms of the
* Common Development and Distribution License ("CDDL"), version 1.0.
* You may only use this file in accordance with the terms of version
* 1.0 of the CDDL.
*
* A full copy of the text of the CDDL should have accompanied this
* source. A copy of the CDDL is also available via the Internet at
* http://www.illumos.org/license/CDDL.
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2018 by Delphix. All rights reserved.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <strings.h>
#include <libzfs_core.h>
#include <libzutil.h>
#include <sys/nvpair.h>
#include <sys/zfs_ioctl.h>
/*
* Test the nvpair inputs for the non-legacy zfs ioctl commands.
*/
boolean_t unexpected_failures;
int zfs_fd;
const char *active_test;
/*
* Tracks which zfs_ioc_t commands were tested
*/
boolean_t ioc_tested[ZFS_IOC_LAST - ZFS_IOC_FIRST];
/*
* Legacy ioctls that are skipped (for now)
*/
static unsigned ioc_skip[] = {
ZFS_IOC_POOL_CREATE,
ZFS_IOC_POOL_DESTROY,
ZFS_IOC_POOL_IMPORT,
ZFS_IOC_POOL_EXPORT,
ZFS_IOC_POOL_CONFIGS,
ZFS_IOC_POOL_STATS,
ZFS_IOC_POOL_TRYIMPORT,
ZFS_IOC_POOL_SCAN,
ZFS_IOC_POOL_FREEZE,
ZFS_IOC_POOL_UPGRADE,
ZFS_IOC_POOL_GET_HISTORY,
ZFS_IOC_VDEV_ADD,
ZFS_IOC_VDEV_REMOVE,
ZFS_IOC_VDEV_SET_STATE,
ZFS_IOC_VDEV_ATTACH,
ZFS_IOC_VDEV_DETACH,
ZFS_IOC_VDEV_SETPATH,
ZFS_IOC_VDEV_SETFRU,
ZFS_IOC_OBJSET_STATS,
ZFS_IOC_OBJSET_ZPLPROPS,
ZFS_IOC_DATASET_LIST_NEXT,
ZFS_IOC_SNAPSHOT_LIST_NEXT,
ZFS_IOC_SET_PROP,
ZFS_IOC_DESTROY,
ZFS_IOC_RENAME,
ZFS_IOC_RECV,
ZFS_IOC_SEND,
ZFS_IOC_INJECT_FAULT,
ZFS_IOC_CLEAR_FAULT,
ZFS_IOC_INJECT_LIST_NEXT,
ZFS_IOC_ERROR_LOG,
ZFS_IOC_CLEAR,
ZFS_IOC_PROMOTE,
ZFS_IOC_DSOBJ_TO_DSNAME,
ZFS_IOC_OBJ_TO_PATH,
ZFS_IOC_POOL_SET_PROPS,
ZFS_IOC_POOL_GET_PROPS,
ZFS_IOC_SET_FSACL,
ZFS_IOC_GET_FSACL,
ZFS_IOC_SHARE,
ZFS_IOC_INHERIT_PROP,
ZFS_IOC_SMB_ACL,
ZFS_IOC_USERSPACE_ONE,
ZFS_IOC_USERSPACE_MANY,
ZFS_IOC_USERSPACE_UPGRADE,
ZFS_IOC_OBJSET_RECVD_PROPS,
ZFS_IOC_VDEV_SPLIT,
ZFS_IOC_NEXT_OBJ,
ZFS_IOC_DIFF,
ZFS_IOC_TMP_SNAPSHOT,
ZFS_IOC_OBJ_TO_STATS,
ZFS_IOC_SPACE_WRITTEN,
ZFS_IOC_POOL_REGUID,
ZFS_IOC_SEND_PROGRESS,
ZFS_IOC_EVENTS_NEXT,
ZFS_IOC_EVENTS_CLEAR,
ZFS_IOC_EVENTS_SEEK,
ZFS_IOC_NEXTBOOT,
ZFS_IOC_JAIL,
ZFS_IOC_UNJAIL,
};
#define IOC_INPUT_TEST(ioc, name, req, opt, err) \
IOC_INPUT_TEST_IMPL(ioc, name, req, opt, err, B_FALSE)
#define IOC_INPUT_TEST_WILD(ioc, name, req, opt, err) \
IOC_INPUT_TEST_IMPL(ioc, name, req, opt, err, B_TRUE)
#define IOC_INPUT_TEST_IMPL(ioc, name, req, opt, err, wild) \
do { \
active_test = __func__ + 5; \
ioc_tested[ioc - ZFS_IOC_FIRST] = B_TRUE; \
lzc_ioctl_test(ioc, name, req, opt, err, wild); \
} while (0)
/*
* run a zfs ioctl command, verify expected results and log failures
*/
static void
lzc_ioctl_run(zfs_ioc_t ioc, const char *name, nvlist_t *innvl, int expected)
{
zfs_cmd_t zc = {"\0"};
char *packed = NULL;
const char *variant;
size_t size = 0;
int error = 0;
switch (expected) {
case ZFS_ERR_IOC_ARG_UNAVAIL:
variant = "unsupported input";
break;
case ZFS_ERR_IOC_ARG_REQUIRED:
variant = "missing input";
break;
case ZFS_ERR_IOC_ARG_BADTYPE:
variant = "invalid input type";
break;
default:
variant = "valid input";
break;
}
packed = fnvlist_pack(innvl, &size);
(void) strlcpy(zc.zc_name, name, sizeof (zc.zc_name));
zc.zc_name[sizeof (zc.zc_name) - 1] = '\0';
zc.zc_nvlist_src = (uint64_t)(uintptr_t)packed;
zc.zc_nvlist_src_size = size;
zc.zc_nvlist_dst_size = MAX(size * 2, 128 * 1024);
zc.zc_nvlist_dst = (uint64_t)(uintptr_t)malloc(zc.zc_nvlist_dst_size);
if (zfs_ioctl_fd(zfs_fd, ioc, &zc) != 0)
error = errno;
if (error != expected) {
unexpected_failures = B_TRUE;
(void) fprintf(stderr, "%s: Unexpected result with %s, "
"error %d (expecting %d)\n",
active_test, variant, error, expected);
}
fnvlist_pack_free(packed, size);
free((void *)(uintptr_t)zc.zc_nvlist_dst);
}
/*
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 16:13:20 +00:00
* Test each ioc for the following ioctl input errors:
* ZFS_ERR_IOC_ARG_UNAVAIL an input argument is not supported by kernel
* ZFS_ERR_IOC_ARG_REQUIRED a required input argument is missing
* ZFS_ERR_IOC_ARG_BADTYPE an input argument has an invalid type
*/
static int
lzc_ioctl_test(zfs_ioc_t ioc, const char *name, nvlist_t *required,
nvlist_t *optional, int expected_error, boolean_t wildcard)
{
nvlist_t *input = fnvlist_alloc();
nvlist_t *future = fnvlist_alloc();
int error = 0;
if (required != NULL) {
for (nvpair_t *pair = nvlist_next_nvpair(required, NULL);
pair != NULL; pair = nvlist_next_nvpair(required, pair)) {
fnvlist_add_nvpair(input, pair);
}
}
if (optional != NULL) {
for (nvpair_t *pair = nvlist_next_nvpair(optional, NULL);
pair != NULL; pair = nvlist_next_nvpair(optional, pair)) {
fnvlist_add_nvpair(input, pair);
}
}
/*
* Generic input run with 'optional' nvlist pair
*/
if (!wildcard)
fnvlist_add_nvlist(input, "optional", future);
lzc_ioctl_run(ioc, name, input, expected_error);
if (!wildcard)
fnvlist_remove(input, "optional");
/*
* Bogus input value
*/
if (!wildcard) {
fnvlist_add_string(input, "bogus_input", "bogus");
lzc_ioctl_run(ioc, name, input, ZFS_ERR_IOC_ARG_UNAVAIL);
fnvlist_remove(input, "bogus_input");
}
/*
* Missing required inputs
*/
if (required != NULL) {
nvlist_t *empty = fnvlist_alloc();
lzc_ioctl_run(ioc, name, empty, ZFS_ERR_IOC_ARG_REQUIRED);
nvlist_free(empty);
}
/*
* Wrong nvpair type
*/
if (required != NULL || optional != NULL) {
/*
* switch the type of one of the input pairs
*/
for (nvpair_t *pair = nvlist_next_nvpair(input, NULL);
pair != NULL; pair = nvlist_next_nvpair(input, pair)) {
char pname[MAXNAMELEN];
data_type_t ptype;
strlcpy(pname, nvpair_name(pair), sizeof (pname));
pname[sizeof (pname) - 1] = '\0';
ptype = nvpair_type(pair);
fnvlist_remove_nvpair(input, pair);
switch (ptype) {
case DATA_TYPE_STRING:
fnvlist_add_uint64(input, pname, 42);
break;
default:
fnvlist_add_string(input, pname, "bogus");
break;
}
}
lzc_ioctl_run(ioc, name, input, ZFS_ERR_IOC_ARG_BADTYPE);
}
nvlist_free(future);
nvlist_free(input);
return (error);
}
static void
test_pool_sync(const char *pool)
{
nvlist_t *required = fnvlist_alloc();
fnvlist_add_boolean_value(required, "force", B_TRUE);
IOC_INPUT_TEST(ZFS_IOC_POOL_SYNC, pool, required, NULL, 0);
nvlist_free(required);
}
static void
test_pool_reopen(const char *pool)
{
nvlist_t *optional = fnvlist_alloc();
fnvlist_add_boolean_value(optional, "scrub_restart", B_FALSE);
IOC_INPUT_TEST(ZFS_IOC_POOL_REOPEN, pool, NULL, optional, 0);
nvlist_free(optional);
}
static void
test_pool_checkpoint(const char *pool)
{
IOC_INPUT_TEST(ZFS_IOC_POOL_CHECKPOINT, pool, NULL, NULL, 0);
}
static void
test_pool_discard_checkpoint(const char *pool)
{
int err = lzc_pool_checkpoint(pool);
if (err == 0 || err == ZFS_ERR_CHECKPOINT_EXISTS)
IOC_INPUT_TEST(ZFS_IOC_POOL_DISCARD_CHECKPOINT, pool, NULL,
NULL, 0);
}
static void
test_log_history(const char *pool)
{
nvlist_t *required = fnvlist_alloc();
fnvlist_add_string(required, "message", "input check");
IOC_INPUT_TEST(ZFS_IOC_LOG_HISTORY, pool, required, NULL, 0);
nvlist_free(required);
}
static void
test_create(const char *pool)
{
char dataset[MAXNAMELEN + 32];
(void) snprintf(dataset, sizeof (dataset), "%s/create-fs", pool);
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
nvlist_t *props = fnvlist_alloc();
fnvlist_add_int32(required, "type", DMU_OST_ZFS);
fnvlist_add_uint64(props, "recordsize", 8192);
fnvlist_add_nvlist(optional, "props", props);
IOC_INPUT_TEST(ZFS_IOC_CREATE, dataset, required, optional, 0);
nvlist_free(required);
nvlist_free(optional);
}
static void
test_snapshot(const char *pool, const char *snapshot)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
nvlist_t *snaps = fnvlist_alloc();
nvlist_t *props = fnvlist_alloc();
fnvlist_add_boolean(snaps, snapshot);
fnvlist_add_nvlist(required, "snaps", snaps);
fnvlist_add_string(props, "org.openzfs:launch", "September 17th, 2013");
fnvlist_add_nvlist(optional, "props", props);
IOC_INPUT_TEST(ZFS_IOC_SNAPSHOT, pool, required, optional, 0);
nvlist_free(props);
nvlist_free(snaps);
nvlist_free(optional);
nvlist_free(required);
}
static void
test_space_snaps(const char *snapshot)
{
nvlist_t *required = fnvlist_alloc();
fnvlist_add_string(required, "firstsnap", snapshot);
IOC_INPUT_TEST(ZFS_IOC_SPACE_SNAPS, snapshot, required, NULL, 0);
nvlist_free(required);
}
static void
test_destroy_snaps(const char *pool, const char *snapshot)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *snaps = fnvlist_alloc();
fnvlist_add_boolean(snaps, snapshot);
fnvlist_add_nvlist(required, "snaps", snaps);
IOC_INPUT_TEST(ZFS_IOC_DESTROY_SNAPS, pool, required, NULL, 0);
nvlist_free(snaps);
nvlist_free(required);
}
static void
test_bookmark(const char *pool, const char *snapshot, const char *bookmark)
{
nvlist_t *required = fnvlist_alloc();
fnvlist_add_string(required, bookmark, snapshot);
IOC_INPUT_TEST_WILD(ZFS_IOC_BOOKMARK, pool, required, NULL, 0);
nvlist_free(required);
}
static void
test_get_bookmarks(const char *dataset)
{
nvlist_t *optional = fnvlist_alloc();
fnvlist_add_boolean(optional, "guid");
fnvlist_add_boolean(optional, "createtxg");
fnvlist_add_boolean(optional, "creation");
IOC_INPUT_TEST_WILD(ZFS_IOC_GET_BOOKMARKS, dataset, NULL, optional, 0);
nvlist_free(optional);
}
static void
test_destroy_bookmarks(const char *pool, const char *bookmark)
{
nvlist_t *required = fnvlist_alloc();
fnvlist_add_boolean(required, bookmark);
IOC_INPUT_TEST_WILD(ZFS_IOC_DESTROY_BOOKMARKS, pool, required, NULL, 0);
nvlist_free(required);
}
static void
test_clone(const char *snapshot, const char *clone)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
nvlist_t *props = fnvlist_alloc();
fnvlist_add_string(required, "origin", snapshot);
IOC_INPUT_TEST(ZFS_IOC_CLONE, clone, required, NULL, 0);
nvlist_free(props);
nvlist_free(optional);
nvlist_free(required);
}
static void
test_rollback(const char *dataset, const char *snapshot)
{
nvlist_t *optional = fnvlist_alloc();
fnvlist_add_string(optional, "target", snapshot);
IOC_INPUT_TEST(ZFS_IOC_ROLLBACK, dataset, NULL, optional, B_FALSE);
nvlist_free(optional);
}
static void
test_hold(const char *pool, const char *snapshot)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
nvlist_t *holds = fnvlist_alloc();
fnvlist_add_string(holds, snapshot, "libzfs_check_hold");
fnvlist_add_nvlist(required, "holds", holds);
fnvlist_add_int32(optional, "cleanup_fd", zfs_fd);
IOC_INPUT_TEST(ZFS_IOC_HOLD, pool, required, optional, 0);
nvlist_free(holds);
nvlist_free(optional);
nvlist_free(required);
}
static void
test_get_holds(const char *snapshot)
{
IOC_INPUT_TEST(ZFS_IOC_GET_HOLDS, snapshot, NULL, NULL, 0);
}
static void
test_release(const char *pool, const char *snapshot)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *release = fnvlist_alloc();
fnvlist_add_boolean(release, "libzfs_check_hold");
fnvlist_add_nvlist(required, snapshot, release);
IOC_INPUT_TEST_WILD(ZFS_IOC_RELEASE, pool, required, NULL, 0);
nvlist_free(release);
nvlist_free(required);
}
static void
test_send_new(const char *snapshot, int fd)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
fnvlist_add_int32(required, "fd", fd);
fnvlist_add_boolean(optional, "largeblockok");
fnvlist_add_boolean(optional, "embedok");
fnvlist_add_boolean(optional, "compressok");
fnvlist_add_boolean(optional, "rawok");
/*
* TODO - Resumable send is harder to set up. So we currently
* ignore testing for that variant.
*/
#if 0
fnvlist_add_string(optional, "fromsnap", from);
fnvlist_add_uint64(optional, "resume_object", resumeobj);
fnvlist_add_uint64(optional, "resume_offset", offset);
fnvlist_add_boolean(optional, "savedok");
#endif
IOC_INPUT_TEST(ZFS_IOC_SEND_NEW, snapshot, required, optional, 0);
nvlist_free(optional);
nvlist_free(required);
}
static void
test_recv_new(const char *dataset, int fd)
{
dmu_replay_record_t drr = { 0 };
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
nvlist_t *props = fnvlist_alloc();
char snapshot[MAXNAMELEN + 32];
ssize_t count;
int cleanup_fd = open(ZFS_DEV, O_RDWR);
(void) snprintf(snapshot, sizeof (snapshot), "%s@replicant", dataset);
count = pread(fd, &drr, sizeof (drr), 0);
if (count != sizeof (drr)) {
(void) fprintf(stderr, "could not read stream: %s\n",
strerror(errno));
}
fnvlist_add_string(required, "snapname", snapshot);
fnvlist_add_byte_array(required, "begin_record", (uchar_t *)&drr,
sizeof (drr));
fnvlist_add_int32(required, "input_fd", fd);
fnvlist_add_string(props, "org.openzfs:launch", "September 17th, 2013");
fnvlist_add_nvlist(optional, "localprops", props);
fnvlist_add_boolean(optional, "force");
fnvlist_add_int32(optional, "cleanup_fd", cleanup_fd);
/*
* TODO - Resumable receive is harder to set up. So we currently
* ignore testing for one.
*/
#if 0
fnvlist_add_nvlist(optional, "props", recvdprops);
fnvlist_add_string(optional, "origin", origin);
fnvlist_add_boolean(optional, "resumable");
fnvlist_add_uint64(optional, "action_handle", *action_handle);
#endif
IOC_INPUT_TEST(ZFS_IOC_RECV_NEW, dataset, required, optional, ZFS_ERR_STREAM_TRUNCATED);
nvlist_free(props);
nvlist_free(optional);
nvlist_free(required);
(void) close(cleanup_fd);
}
static void
test_send_space(const char *snapshot1, const char *snapshot2)
{
nvlist_t *optional = fnvlist_alloc();
fnvlist_add_string(optional, "from", snapshot1);
fnvlist_add_boolean(optional, "largeblockok");
fnvlist_add_boolean(optional, "embedok");
fnvlist_add_boolean(optional, "compressok");
fnvlist_add_boolean(optional, "rawok");
IOC_INPUT_TEST(ZFS_IOC_SEND_SPACE, snapshot2, NULL, optional, 0);
nvlist_free(optional);
}
static void
test_remap(const char *dataset)
{
IOC_INPUT_TEST(ZFS_IOC_REMAP, dataset, NULL, NULL, 0);
}
static void
test_channel_program(const char *pool)
{
const char *program =
"arg = ...\n"
"argv = arg[\"argv\"]\n"
"return argv[1]";
char *const argv[1] = { "Hello World!" };
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
nvlist_t *args = fnvlist_alloc();
fnvlist_add_string(required, "program", program);
fnvlist_add_string_array(args, "argv", argv, 1);
fnvlist_add_nvlist(required, "arg", args);
fnvlist_add_boolean_value(optional, "sync", B_TRUE);
fnvlist_add_uint64(optional, "instrlimit", 1000 * 1000);
fnvlist_add_uint64(optional, "memlimit", 8192 * 1024);
IOC_INPUT_TEST(ZFS_IOC_CHANNEL_PROGRAM, pool, required, optional, 0);
nvlist_free(args);
nvlist_free(optional);
nvlist_free(required);
}
#define WRAPPING_KEY_LEN 32
static void
test_load_key(const char *dataset)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
nvlist_t *hidden = fnvlist_alloc();
uint8_t keydata[WRAPPING_KEY_LEN] = {0};
fnvlist_add_uint8_array(hidden, "wkeydata", keydata, sizeof (keydata));
fnvlist_add_nvlist(required, "hidden_args", hidden);
fnvlist_add_boolean(optional, "noop");
IOC_INPUT_TEST(ZFS_IOC_LOAD_KEY, dataset, required, optional, EINVAL);
nvlist_free(hidden);
nvlist_free(optional);
nvlist_free(required);
}
static void
test_change_key(const char *dataset)
{
IOC_INPUT_TEST(ZFS_IOC_CHANGE_KEY, dataset, NULL, NULL, EINVAL);
}
static void
test_unload_key(const char *dataset)
{
IOC_INPUT_TEST(ZFS_IOC_UNLOAD_KEY, dataset, NULL, NULL, EACCES);
}
OpenZFS 9102 - zfs should be able to initialize storage devices PROBLEM ======== The first access to a block incurs a performance penalty on some platforms (e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are "thick provisioned", where supported by the platform (VMware). This can create a large delay in getting a new virtual machines up and running (or adding storage to an existing Engine). If the thick provision step is omitted, write performance will be suboptimal until all blocks on the LUN have been written. SOLUTION ========= This feature introduces a way to 'initialize' the disks at install or in the background to make sure we don't incur this first read penalty. When an entire LUN is added to ZFS, we make all space available immediately, and allow ZFS to find unallocated space and zero it out. This works with concurrent writes to arbitrary offsets, ensuring that we don't zero out something that has been (or is in the middle of being) written. This scheme can also be applied to existing pools (affecting only free regions on the vdev). Detailed design: - new subcommand:zpool initialize [-cs] <pool> [<vdev> ...] - start, suspend, or cancel initialization - Creates new open-context thread for each vdev - Thread iterates through all metaslabs in this vdev - Each metaslab: - select a metaslab - load the metaslab - mark the metaslab as being zeroed - walk all free ranges within that metaslab and translate them to ranges on the leaf vdev - issue a "zeroing" I/O on the leaf vdev that corresponds to a free range on the metaslab we're working on - continue until all free ranges for this metaslab have been "zeroed" - reset/unmark the metaslab being zeroed - if more metaslabs exist, then repeat above tasks. - if no more metaslabs, then we're done. - progress for the initialization is stored on-disk in the vdev’s leaf zap object. The following information is stored: - the last offset that has been initialized - the state of the initialization process (i.e. active, suspended, or canceled) - the start time for the initialization - progress is reported via the zpool status command and shows information for each of the vdevs that are initializing Porting notes: - Added zfs_initialize_value module parameter to set the pattern written by "zpool initialize". - Added zfs_vdev_{initializing,removal}_{min,max}_active module options. Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: loli10K <ezomori.nozomu@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Signed-off-by: Tim Chase <tim@chase2k.com> Ported-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/9102 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb Closes #8230
2018-12-19 14:54:59 +00:00
static void
test_vdev_initialize(const char *pool)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *vdev_guids = fnvlist_alloc();
fnvlist_add_uint64(vdev_guids, "path", 0xdeadbeefdeadbeef);
fnvlist_add_uint64(required, ZPOOL_INITIALIZE_COMMAND,
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 16:13:20 +00:00
POOL_INITIALIZE_START);
OpenZFS 9102 - zfs should be able to initialize storage devices PROBLEM ======== The first access to a block incurs a performance penalty on some platforms (e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are "thick provisioned", where supported by the platform (VMware). This can create a large delay in getting a new virtual machines up and running (or adding storage to an existing Engine). If the thick provision step is omitted, write performance will be suboptimal until all blocks on the LUN have been written. SOLUTION ========= This feature introduces a way to 'initialize' the disks at install or in the background to make sure we don't incur this first read penalty. When an entire LUN is added to ZFS, we make all space available immediately, and allow ZFS to find unallocated space and zero it out. This works with concurrent writes to arbitrary offsets, ensuring that we don't zero out something that has been (or is in the middle of being) written. This scheme can also be applied to existing pools (affecting only free regions on the vdev). Detailed design: - new subcommand:zpool initialize [-cs] <pool> [<vdev> ...] - start, suspend, or cancel initialization - Creates new open-context thread for each vdev - Thread iterates through all metaslabs in this vdev - Each metaslab: - select a metaslab - load the metaslab - mark the metaslab as being zeroed - walk all free ranges within that metaslab and translate them to ranges on the leaf vdev - issue a "zeroing" I/O on the leaf vdev that corresponds to a free range on the metaslab we're working on - continue until all free ranges for this metaslab have been "zeroed" - reset/unmark the metaslab being zeroed - if more metaslabs exist, then repeat above tasks. - if no more metaslabs, then we're done. - progress for the initialization is stored on-disk in the vdev’s leaf zap object. The following information is stored: - the last offset that has been initialized - the state of the initialization process (i.e. active, suspended, or canceled) - the start time for the initialization - progress is reported via the zpool status command and shows information for each of the vdevs that are initializing Porting notes: - Added zfs_initialize_value module parameter to set the pattern written by "zpool initialize". - Added zfs_vdev_{initializing,removal}_{min,max}_active module options. Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: loli10K <ezomori.nozomu@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Signed-off-by: Tim Chase <tim@chase2k.com> Ported-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/9102 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb Closes #8230
2018-12-19 14:54:59 +00:00
fnvlist_add_nvlist(required, ZPOOL_INITIALIZE_VDEVS, vdev_guids);
IOC_INPUT_TEST(ZFS_IOC_POOL_INITIALIZE, pool, required, NULL, EINVAL);
nvlist_free(vdev_guids);
nvlist_free(required);
}
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 16:13:20 +00:00
static void
test_vdev_trim(const char *pool)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
nvlist_t *vdev_guids = fnvlist_alloc();
fnvlist_add_uint64(vdev_guids, "path", 0xdeadbeefdeadbeef);
fnvlist_add_uint64(required, ZPOOL_TRIM_COMMAND, POOL_TRIM_START);
fnvlist_add_nvlist(required, ZPOOL_TRIM_VDEVS, vdev_guids);
fnvlist_add_uint64(optional, ZPOOL_TRIM_RATE, 1ULL << 30);
fnvlist_add_boolean_value(optional, ZPOOL_TRIM_SECURE, B_TRUE);
IOC_INPUT_TEST(ZFS_IOC_POOL_TRIM, pool, required, optional, EINVAL);
nvlist_free(vdev_guids);
nvlist_free(optional);
nvlist_free(required);
}
static int
zfs_destroy(const char *dataset)
{
zfs_cmd_t zc = {"\0"};
int err;
(void) strlcpy(zc.zc_name, dataset, sizeof (zc.zc_name));
zc.zc_name[sizeof (zc.zc_name) - 1] = '\0';
err = zfs_ioctl_fd(zfs_fd, ZFS_IOC_DESTROY, &zc);
return (err == 0 ? 0 : errno);
}
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
static void
test_redact(const char *snapshot1, const char *snapshot2)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *snapnv = fnvlist_alloc();
char bookmark[MAXNAMELEN + 32];
fnvlist_add_string(required, "bookname", "testbookmark");
fnvlist_add_boolean(snapnv, snapshot2);
fnvlist_add_nvlist(required, "snapnv", snapnv);
IOC_INPUT_TEST(ZFS_IOC_REDACT, snapshot1, required, NULL, 0);
nvlist_free(snapnv);
nvlist_free(required);
strlcpy(bookmark, snapshot1, sizeof (bookmark));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
*strchr(bookmark, '@') = '\0';
strlcat(bookmark, "#testbookmark", sizeof (bookmark) -
strlen(bookmark));
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
zfs_destroy(bookmark);
}
static void
test_get_bookmark_props(const char *bookmark)
{
IOC_INPUT_TEST(ZFS_IOC_GET_BOOKMARK_PROPS, bookmark, NULL, NULL, 0);
}
Add subcommand to wait for background zfs activity to complete Currently the best way to wait for the completion of a long-running operation in a pool, like a scrub or device removal, is to poll 'zpool status' and parse its output, which is neither efficient nor convenient. This change adds a 'wait' subcommand to the zpool command. When invoked, 'zpool wait' will block until a specified type of background activity completes. Currently, this subcommand can wait for any of the following: - Scrubs or resilvers to complete - Devices to initialized - Devices to be replaced - Devices to be removed - Checkpoints to be discarded - Background freeing to complete For example, a scrub that is in progress could be waited for by running zpool wait -t scrub <pool> This also adds a -w flag to the attach, checkpoint, initialize, replace, remove, and scrub subcommands. When used, this flag makes the operations kicked off by these subcommands synchronous instead of asynchronous. This functionality is implemented using a new ioctl. The type of activity to wait for is provided as input to the ioctl, and the ioctl blocks until all activity of that type has completed. An ioctl was used over other methods of kernel-userspace communiction primarily for the sake of portability. Porting Notes: This is ported from Delphix OS change DLPX-44432. The following changes were made while porting: - Added ZoL-style ioctl input declaration. - Reorganized error handling in zpool_initialize in libzfs to integrate better with changes made for TRIM support. - Fixed check for whether a checkpoint discard is in progress. Previously it also waited if the pool had a checkpoint, instead of just if a checkpoint was being discarded. - Exposed zfs_initialize_chunk_size as a ZoL-style tunable. - Updated more existing tests to make use of new 'zpool wait' functionality, tests that don't exist in Delphix OS. - Used existing ZoL tunable zfs_scan_suspend_progress, together with zinject, in place of a new tunable zfs_scan_max_blks_per_txg. - Added support for a non-integral interval argument to zpool wait. Future work: ZoL has support for trimming devices, which Delphix OS does not. In the future, 'zpool wait' could be extended to add the ability to wait for trim operations to complete. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: John Gallagher <john.gallagher@delphix.com> Closes #9162
2019-09-14 01:09:06 +00:00
static void
test_wait(const char *pool)
{
nvlist_t *required = fnvlist_alloc();
nvlist_t *optional = fnvlist_alloc();
fnvlist_add_int32(required, "wait_activity", 2);
fnvlist_add_uint64(optional, "wait_tag", 0xdeadbeefdeadbeef);
IOC_INPUT_TEST(ZFS_IOC_WAIT, pool, required, optional, EINVAL);
nvlist_free(required);
nvlist_free(optional);
}
static void
zfs_ioc_input_tests(const char *pool)
{
char filepath[] = "/tmp/ioc_test_file_XXXXXX";
char dataset[ZFS_MAX_DATASET_NAME_LEN];
char snapbase[ZFS_MAX_DATASET_NAME_LEN + 32];
char snapshot[ZFS_MAX_DATASET_NAME_LEN + 32];
char bookmark[ZFS_MAX_DATASET_NAME_LEN + 32];
char backup[ZFS_MAX_DATASET_NAME_LEN];
char clone[ZFS_MAX_DATASET_NAME_LEN];
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
char clonesnap[ZFS_MAX_DATASET_NAME_LEN + 32];
int tmpfd, err;
/*
* Setup names and create a working dataset
*/
(void) snprintf(dataset, sizeof (dataset), "%s/test-fs", pool);
(void) snprintf(snapbase, sizeof (snapbase), "%s@snapbase", dataset);
(void) snprintf(snapshot, sizeof (snapshot), "%s@snapshot", dataset);
(void) snprintf(bookmark, sizeof (bookmark), "%s#bookmark", dataset);
(void) snprintf(clone, sizeof (clone), "%s/test-fs-clone", pool);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
(void) snprintf(clonesnap, sizeof (clonesnap), "%s@snap", clone);
(void) snprintf(backup, sizeof (backup), "%s/backup", pool);
err = lzc_create(dataset, DMU_OST_ZFS, NULL, NULL, 0);
if (err) {
(void) fprintf(stderr, "could not create '%s': %s\n",
dataset, strerror(errno));
exit(2);
}
tmpfd = mkstemp(filepath);
if (tmpfd < 0) {
(void) fprintf(stderr, "could not create '%s': %s\n",
filepath, strerror(errno));
exit(2);
}
/*
* run a test for each ioctl
* Note that some test build on previous test operations
*/
test_pool_sync(pool);
test_pool_reopen(pool);
test_pool_checkpoint(pool);
test_pool_discard_checkpoint(pool);
test_log_history(pool);
test_create(dataset);
test_snapshot(pool, snapbase);
test_snapshot(pool, snapshot);
test_space_snaps(snapshot);
test_send_space(snapbase, snapshot);
test_send_new(snapshot, tmpfd);
test_recv_new(backup, tmpfd);
test_bookmark(pool, snapshot, bookmark);
test_get_bookmarks(dataset);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
test_get_bookmark_props(bookmark);
test_destroy_bookmarks(pool, bookmark);
test_hold(pool, snapshot);
test_get_holds(snapshot);
test_release(pool, snapshot);
test_clone(snapshot, clone);
Implement Redacted Send/Receive Redacted send/receive allows users to send subsets of their data to a target system. One possible use case for this feature is to not transmit sensitive information to a data warehousing, test/dev, or analytics environment. Another is to save space by not replicating unimportant data within a given dataset, for example in backup tools like zrepl. Redacted send/receive is a three-stage process. First, a clone (or clones) is made of the snapshot to be sent to the target. In this clone (or clones), all unnecessary or unwanted data is removed or modified. This clone is then snapshotted to create the "redaction snapshot" (or snapshots). Second, the new zfs redact command is used to create a redaction bookmark. The redaction bookmark stores the list of blocks in a snapshot that were modified by the redaction snapshot(s). Finally, the redaction bookmark is passed as a parameter to zfs send. When sending to the snapshot that was redacted, the redaction bookmark is used to filter out blocks that contain sensitive or unwanted information, and those blocks are not included in the send stream. When sending from the redaction bookmark, the blocks it contains are considered as candidate blocks in addition to those blocks in the destination snapshot that were modified since the creation_txg of the redaction bookmark. This step is necessary to allow the target to rehydrate data in the case where some blocks are accidentally or unnecessarily modified in the redaction snapshot. The changes to bookmarks to enable fast space estimation involve adding deadlists to bookmarks. There is also logic to manage the life cycles of these deadlists. The new size estimation process operates in cases where previously an accurate estimate could not be provided. In those cases, a send is performed where no data blocks are read, reducing the runtime significantly and providing a byte-accurate size estimate. Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Prashanth Sreenivasa <pks@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Chris Williamson <chris.williamson@delphix.com> Reviewed-by: Pavel Zhakarov <pavel.zakharov@delphix.com> Reviewed-by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Dagnelie <pcd@delphix.com> Closes #7958
2019-06-19 16:48:13 +00:00
test_snapshot(pool, clonesnap);
test_redact(snapshot, clonesnap);
zfs_destroy(clonesnap);
zfs_destroy(clone);
test_rollback(dataset, snapshot);
test_destroy_snaps(pool, snapshot);
test_destroy_snaps(pool, snapbase);
test_remap(dataset);
test_channel_program(pool);
test_load_key(dataset);
test_change_key(dataset);
test_unload_key(dataset);
OpenZFS 9102 - zfs should be able to initialize storage devices PROBLEM ======== The first access to a block incurs a performance penalty on some platforms (e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are "thick provisioned", where supported by the platform (VMware). This can create a large delay in getting a new virtual machines up and running (or adding storage to an existing Engine). If the thick provision step is omitted, write performance will be suboptimal until all blocks on the LUN have been written. SOLUTION ========= This feature introduces a way to 'initialize' the disks at install or in the background to make sure we don't incur this first read penalty. When an entire LUN is added to ZFS, we make all space available immediately, and allow ZFS to find unallocated space and zero it out. This works with concurrent writes to arbitrary offsets, ensuring that we don't zero out something that has been (or is in the middle of being) written. This scheme can also be applied to existing pools (affecting only free regions on the vdev). Detailed design: - new subcommand:zpool initialize [-cs] <pool> [<vdev> ...] - start, suspend, or cancel initialization - Creates new open-context thread for each vdev - Thread iterates through all metaslabs in this vdev - Each metaslab: - select a metaslab - load the metaslab - mark the metaslab as being zeroed - walk all free ranges within that metaslab and translate them to ranges on the leaf vdev - issue a "zeroing" I/O on the leaf vdev that corresponds to a free range on the metaslab we're working on - continue until all free ranges for this metaslab have been "zeroed" - reset/unmark the metaslab being zeroed - if more metaslabs exist, then repeat above tasks. - if no more metaslabs, then we're done. - progress for the initialization is stored on-disk in the vdev’s leaf zap object. The following information is stored: - the last offset that has been initialized - the state of the initialization process (i.e. active, suspended, or canceled) - the start time for the initialization - progress is reported via the zpool status command and shows information for each of the vdevs that are initializing Porting notes: - Added zfs_initialize_value module parameter to set the pattern written by "zpool initialize". - Added zfs_vdev_{initializing,removal}_{min,max}_active module options. Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: loli10K <ezomori.nozomu@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Signed-off-by: Tim Chase <tim@chase2k.com> Ported-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/9102 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb Closes #8230
2018-12-19 14:54:59 +00:00
test_vdev_initialize(pool);
Add TRIM support UNMAP/TRIM support is a frequently-requested feature to help prevent performance from degrading on SSDs and on various other SAN-like storage back-ends. By issuing UNMAP/TRIM commands for sectors which are no longer allocated the underlying device can often more efficiently manage itself. This TRIM implementation is modeled on the `zpool initialize` feature which writes a pattern to all unallocated space in the pool. The new `zpool trim` command uses the same vdev_xlate() code to calculate what sectors are unallocated, the same per- vdev TRIM thread model and locking, and the same basic CLI for a consistent user experience. The core difference is that instead of writing a pattern it will issue UNMAP/TRIM commands for those extents. The zio pipeline was updated to accommodate this by adding a new ZIO_TYPE_TRIM type and associated spa taskq. This new type makes is straight forward to add the platform specific TRIM/UNMAP calls to vdev_disk.c and vdev_file.c. These new ZIO_TYPE_TRIM zios are handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs. This makes it possible to largely avoid changing the pipieline, one exception is that TRIM zio's may exceed the 16M block size limit since they contain no data. In addition to the manual `zpool trim` command, a background automatic TRIM was added and is controlled by the 'autotrim' property. It relies on the exact same infrastructure as the manual TRIM. However, instead of relying on the extents in a metaslab's ms_allocatable range tree, a ms_trim tree is kept per metaslab. When 'autotrim=on', ranges added back to the ms_allocatable tree are also added to the ms_free tree. The ms_free tree is then periodically consumed by an autotrim thread which systematically walks a top level vdev's metaslabs. Since the automatic TRIM will skip ranges it considers too small there is value in occasionally running a full `zpool trim`. This may occur when the freed blocks are small and not enough time was allowed to aggregate them. An automatic TRIM and a manual `zpool trim` may be run concurrently, in which case the automatic TRIM will yield to the manual TRIM. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com> Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com> Contributions-by: Tim Chase <tim@chase2k.com> Contributions-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8419 Closes #598
2019-03-29 16:13:20 +00:00
test_vdev_trim(pool);
OpenZFS 9102 - zfs should be able to initialize storage devices PROBLEM ======== The first access to a block incurs a performance penalty on some platforms (e.g. AWS's EBS, VMware VMDKs). Therefore we recommend that volumes are "thick provisioned", where supported by the platform (VMware). This can create a large delay in getting a new virtual machines up and running (or adding storage to an existing Engine). If the thick provision step is omitted, write performance will be suboptimal until all blocks on the LUN have been written. SOLUTION ========= This feature introduces a way to 'initialize' the disks at install or in the background to make sure we don't incur this first read penalty. When an entire LUN is added to ZFS, we make all space available immediately, and allow ZFS to find unallocated space and zero it out. This works with concurrent writes to arbitrary offsets, ensuring that we don't zero out something that has been (or is in the middle of being) written. This scheme can also be applied to existing pools (affecting only free regions on the vdev). Detailed design: - new subcommand:zpool initialize [-cs] <pool> [<vdev> ...] - start, suspend, or cancel initialization - Creates new open-context thread for each vdev - Thread iterates through all metaslabs in this vdev - Each metaslab: - select a metaslab - load the metaslab - mark the metaslab as being zeroed - walk all free ranges within that metaslab and translate them to ranges on the leaf vdev - issue a "zeroing" I/O on the leaf vdev that corresponds to a free range on the metaslab we're working on - continue until all free ranges for this metaslab have been "zeroed" - reset/unmark the metaslab being zeroed - if more metaslabs exist, then repeat above tasks. - if no more metaslabs, then we're done. - progress for the initialization is stored on-disk in the vdev’s leaf zap object. The following information is stored: - the last offset that has been initialized - the state of the initialization process (i.e. active, suspended, or canceled) - the start time for the initialization - progress is reported via the zpool status command and shows information for each of the vdevs that are initializing Porting notes: - Added zfs_initialize_value module parameter to set the pattern written by "zpool initialize". - Added zfs_vdev_{initializing,removal}_{min,max}_active module options. Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: loli10K <ezomori.nozomu@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Richard Lowe <richlowe@richlowe.net> Signed-off-by: Tim Chase <tim@chase2k.com> Ported-by: Tim Chase <tim@chase2k.com> OpenZFS-issue: https://www.illumos.org/issues/9102 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3963210eb Closes #8230
2018-12-19 14:54:59 +00:00
Add subcommand to wait for background zfs activity to complete Currently the best way to wait for the completion of a long-running operation in a pool, like a scrub or device removal, is to poll 'zpool status' and parse its output, which is neither efficient nor convenient. This change adds a 'wait' subcommand to the zpool command. When invoked, 'zpool wait' will block until a specified type of background activity completes. Currently, this subcommand can wait for any of the following: - Scrubs or resilvers to complete - Devices to initialized - Devices to be replaced - Devices to be removed - Checkpoints to be discarded - Background freeing to complete For example, a scrub that is in progress could be waited for by running zpool wait -t scrub <pool> This also adds a -w flag to the attach, checkpoint, initialize, replace, remove, and scrub subcommands. When used, this flag makes the operations kicked off by these subcommands synchronous instead of asynchronous. This functionality is implemented using a new ioctl. The type of activity to wait for is provided as input to the ioctl, and the ioctl blocks until all activity of that type has completed. An ioctl was used over other methods of kernel-userspace communiction primarily for the sake of portability. Porting Notes: This is ported from Delphix OS change DLPX-44432. The following changes were made while porting: - Added ZoL-style ioctl input declaration. - Reorganized error handling in zpool_initialize in libzfs to integrate better with changes made for TRIM support. - Fixed check for whether a checkpoint discard is in progress. Previously it also waited if the pool had a checkpoint, instead of just if a checkpoint was being discarded. - Exposed zfs_initialize_chunk_size as a ZoL-style tunable. - Updated more existing tests to make use of new 'zpool wait' functionality, tests that don't exist in Delphix OS. - Used existing ZoL tunable zfs_scan_suspend_progress, together with zinject, in place of a new tunable zfs_scan_max_blks_per_txg. - Added support for a non-integral interval argument to zpool wait. Future work: ZoL has support for trimming devices, which Delphix OS does not. In the future, 'zpool wait' could be extended to add the ability to wait for trim operations to complete. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: John Gallagher <john.gallagher@delphix.com> Closes #9162
2019-09-14 01:09:06 +00:00
test_wait(pool);
/*
* cleanup
*/
zfs_cmd_t zc = {"\0"};
nvlist_t *snaps = fnvlist_alloc();
fnvlist_add_boolean(snaps, snapshot);
(void) lzc_destroy_snaps(snaps, B_FALSE, NULL);
nvlist_free(snaps);
(void) zfs_destroy(dataset);
(void) zfs_destroy(backup);
(void) close(tmpfd);
(void) unlink(filepath);
/*
* All the unused slots should yield ZFS_ERR_IOC_CMD_UNAVAIL
*/
for (int i = 0; i < ARRAY_SIZE(ioc_skip); i++) {
if (ioc_tested[ioc_skip[i] - ZFS_IOC_FIRST])
(void) fprintf(stderr, "cmd %d tested, not skipped!\n",
(int)(ioc_skip[i] - ZFS_IOC_FIRST));
ioc_tested[ioc_skip[i] - ZFS_IOC_FIRST] = B_TRUE;
}
(void) strlcpy(zc.zc_name, pool, sizeof (zc.zc_name));
zc.zc_name[sizeof (zc.zc_name) - 1] = '\0';
for (unsigned ioc = ZFS_IOC_FIRST; ioc < ZFS_IOC_LAST; ioc++) {
unsigned cmd = ioc - ZFS_IOC_FIRST;
if (ioc_tested[cmd])
continue;
if (zfs_ioctl_fd(zfs_fd, ioc, &zc) != 0 &&
errno != ZFS_ERR_IOC_CMD_UNAVAIL) {
(void) fprintf(stderr, "cmd %d is missing a test case "
"(%d)\n", cmd, errno);
}
}
}
enum zfs_ioc_ref {
#ifdef __FreeBSD__
ZFS_IOC_BASE = 0,
#else
ZFS_IOC_BASE = ('Z' << 8),
#endif
ZFS_IOC_PLATFORM_BASE = ZFS_IOC_BASE + 0x80,
};
/*
* Canonical reference check of /dev/zfs ioctl numbers.
* These cannot change and new ioctl numbers must be appended.
*/
boolean_t
validate_ioc_values(void)
{
boolean_t result = B_TRUE;
#define CHECK(expr) do { \
if (!(expr)) { \
result = B_FALSE; \
fprintf(stderr, "(%s) === FALSE\n", #expr); \
} \
} while (0)
CHECK(ZFS_IOC_BASE + 0 == ZFS_IOC_POOL_CREATE);
CHECK(ZFS_IOC_BASE + 1 == ZFS_IOC_POOL_DESTROY);
CHECK(ZFS_IOC_BASE + 2 == ZFS_IOC_POOL_IMPORT);
CHECK(ZFS_IOC_BASE + 3 == ZFS_IOC_POOL_EXPORT);
CHECK(ZFS_IOC_BASE + 4 == ZFS_IOC_POOL_CONFIGS);
CHECK(ZFS_IOC_BASE + 5 == ZFS_IOC_POOL_STATS);
CHECK(ZFS_IOC_BASE + 6 == ZFS_IOC_POOL_TRYIMPORT);
CHECK(ZFS_IOC_BASE + 7 == ZFS_IOC_POOL_SCAN);
CHECK(ZFS_IOC_BASE + 8 == ZFS_IOC_POOL_FREEZE);
CHECK(ZFS_IOC_BASE + 9 == ZFS_IOC_POOL_UPGRADE);
CHECK(ZFS_IOC_BASE + 10 == ZFS_IOC_POOL_GET_HISTORY);
CHECK(ZFS_IOC_BASE + 11 == ZFS_IOC_VDEV_ADD);
CHECK(ZFS_IOC_BASE + 12 == ZFS_IOC_VDEV_REMOVE);
CHECK(ZFS_IOC_BASE + 13 == ZFS_IOC_VDEV_SET_STATE);
CHECK(ZFS_IOC_BASE + 14 == ZFS_IOC_VDEV_ATTACH);
CHECK(ZFS_IOC_BASE + 15 == ZFS_IOC_VDEV_DETACH);
CHECK(ZFS_IOC_BASE + 16 == ZFS_IOC_VDEV_SETPATH);
CHECK(ZFS_IOC_BASE + 17 == ZFS_IOC_VDEV_SETFRU);
CHECK(ZFS_IOC_BASE + 18 == ZFS_IOC_OBJSET_STATS);
CHECK(ZFS_IOC_BASE + 19 == ZFS_IOC_OBJSET_ZPLPROPS);
CHECK(ZFS_IOC_BASE + 20 == ZFS_IOC_DATASET_LIST_NEXT);
CHECK(ZFS_IOC_BASE + 21 == ZFS_IOC_SNAPSHOT_LIST_NEXT);
CHECK(ZFS_IOC_BASE + 22 == ZFS_IOC_SET_PROP);
CHECK(ZFS_IOC_BASE + 23 == ZFS_IOC_CREATE);
CHECK(ZFS_IOC_BASE + 24 == ZFS_IOC_DESTROY);
CHECK(ZFS_IOC_BASE + 25 == ZFS_IOC_ROLLBACK);
CHECK(ZFS_IOC_BASE + 26 == ZFS_IOC_RENAME);
CHECK(ZFS_IOC_BASE + 27 == ZFS_IOC_RECV);
CHECK(ZFS_IOC_BASE + 28 == ZFS_IOC_SEND);
CHECK(ZFS_IOC_BASE + 29 == ZFS_IOC_INJECT_FAULT);
CHECK(ZFS_IOC_BASE + 30 == ZFS_IOC_CLEAR_FAULT);
CHECK(ZFS_IOC_BASE + 31 == ZFS_IOC_INJECT_LIST_NEXT);
CHECK(ZFS_IOC_BASE + 32 == ZFS_IOC_ERROR_LOG);
CHECK(ZFS_IOC_BASE + 33 == ZFS_IOC_CLEAR);
CHECK(ZFS_IOC_BASE + 34 == ZFS_IOC_PROMOTE);
CHECK(ZFS_IOC_BASE + 35 == ZFS_IOC_SNAPSHOT);
CHECK(ZFS_IOC_BASE + 36 == ZFS_IOC_DSOBJ_TO_DSNAME);
CHECK(ZFS_IOC_BASE + 37 == ZFS_IOC_OBJ_TO_PATH);
CHECK(ZFS_IOC_BASE + 38 == ZFS_IOC_POOL_SET_PROPS);
CHECK(ZFS_IOC_BASE + 39 == ZFS_IOC_POOL_GET_PROPS);
CHECK(ZFS_IOC_BASE + 40 == ZFS_IOC_SET_FSACL);
CHECK(ZFS_IOC_BASE + 41 == ZFS_IOC_GET_FSACL);
CHECK(ZFS_IOC_BASE + 42 == ZFS_IOC_SHARE);
CHECK(ZFS_IOC_BASE + 43 == ZFS_IOC_INHERIT_PROP);
CHECK(ZFS_IOC_BASE + 44 == ZFS_IOC_SMB_ACL);
CHECK(ZFS_IOC_BASE + 45 == ZFS_IOC_USERSPACE_ONE);
CHECK(ZFS_IOC_BASE + 46 == ZFS_IOC_USERSPACE_MANY);
CHECK(ZFS_IOC_BASE + 47 == ZFS_IOC_USERSPACE_UPGRADE);
CHECK(ZFS_IOC_BASE + 48 == ZFS_IOC_HOLD);
CHECK(ZFS_IOC_BASE + 49 == ZFS_IOC_RELEASE);
CHECK(ZFS_IOC_BASE + 50 == ZFS_IOC_GET_HOLDS);
CHECK(ZFS_IOC_BASE + 51 == ZFS_IOC_OBJSET_RECVD_PROPS);
CHECK(ZFS_IOC_BASE + 52 == ZFS_IOC_VDEV_SPLIT);
CHECK(ZFS_IOC_BASE + 53 == ZFS_IOC_NEXT_OBJ);
CHECK(ZFS_IOC_BASE + 54 == ZFS_IOC_DIFF);
CHECK(ZFS_IOC_BASE + 55 == ZFS_IOC_TMP_SNAPSHOT);
CHECK(ZFS_IOC_BASE + 56 == ZFS_IOC_OBJ_TO_STATS);
CHECK(ZFS_IOC_BASE + 57 == ZFS_IOC_SPACE_WRITTEN);
CHECK(ZFS_IOC_BASE + 58 == ZFS_IOC_SPACE_SNAPS);
CHECK(ZFS_IOC_BASE + 59 == ZFS_IOC_DESTROY_SNAPS);
CHECK(ZFS_IOC_BASE + 60 == ZFS_IOC_POOL_REGUID);
CHECK(ZFS_IOC_BASE + 61 == ZFS_IOC_POOL_REOPEN);
CHECK(ZFS_IOC_BASE + 62 == ZFS_IOC_SEND_PROGRESS);
CHECK(ZFS_IOC_BASE + 63 == ZFS_IOC_LOG_HISTORY);
CHECK(ZFS_IOC_BASE + 64 == ZFS_IOC_SEND_NEW);
CHECK(ZFS_IOC_BASE + 65 == ZFS_IOC_SEND_SPACE);
CHECK(ZFS_IOC_BASE + 66 == ZFS_IOC_CLONE);
CHECK(ZFS_IOC_BASE + 67 == ZFS_IOC_BOOKMARK);
CHECK(ZFS_IOC_BASE + 68 == ZFS_IOC_GET_BOOKMARKS);
CHECK(ZFS_IOC_BASE + 69 == ZFS_IOC_DESTROY_BOOKMARKS);
CHECK(ZFS_IOC_BASE + 70 == ZFS_IOC_RECV_NEW);
CHECK(ZFS_IOC_BASE + 71 == ZFS_IOC_POOL_SYNC);
CHECK(ZFS_IOC_BASE + 72 == ZFS_IOC_CHANNEL_PROGRAM);
CHECK(ZFS_IOC_BASE + 73 == ZFS_IOC_LOAD_KEY);
CHECK(ZFS_IOC_BASE + 74 == ZFS_IOC_UNLOAD_KEY);
CHECK(ZFS_IOC_BASE + 75 == ZFS_IOC_CHANGE_KEY);
CHECK(ZFS_IOC_BASE + 76 == ZFS_IOC_REMAP);
CHECK(ZFS_IOC_BASE + 77 == ZFS_IOC_POOL_CHECKPOINT);
CHECK(ZFS_IOC_BASE + 78 == ZFS_IOC_POOL_DISCARD_CHECKPOINT);
CHECK(ZFS_IOC_BASE + 79 == ZFS_IOC_POOL_INITIALIZE);
CHECK(ZFS_IOC_BASE + 80 == ZFS_IOC_POOL_TRIM);
CHECK(ZFS_IOC_BASE + 81 == ZFS_IOC_REDACT);
CHECK(ZFS_IOC_BASE + 82 == ZFS_IOC_GET_BOOKMARK_PROPS);
Add subcommand to wait for background zfs activity to complete Currently the best way to wait for the completion of a long-running operation in a pool, like a scrub or device removal, is to poll 'zpool status' and parse its output, which is neither efficient nor convenient. This change adds a 'wait' subcommand to the zpool command. When invoked, 'zpool wait' will block until a specified type of background activity completes. Currently, this subcommand can wait for any of the following: - Scrubs or resilvers to complete - Devices to initialized - Devices to be replaced - Devices to be removed - Checkpoints to be discarded - Background freeing to complete For example, a scrub that is in progress could be waited for by running zpool wait -t scrub <pool> This also adds a -w flag to the attach, checkpoint, initialize, replace, remove, and scrub subcommands. When used, this flag makes the operations kicked off by these subcommands synchronous instead of asynchronous. This functionality is implemented using a new ioctl. The type of activity to wait for is provided as input to the ioctl, and the ioctl blocks until all activity of that type has completed. An ioctl was used over other methods of kernel-userspace communiction primarily for the sake of portability. Porting Notes: This is ported from Delphix OS change DLPX-44432. The following changes were made while porting: - Added ZoL-style ioctl input declaration. - Reorganized error handling in zpool_initialize in libzfs to integrate better with changes made for TRIM support. - Fixed check for whether a checkpoint discard is in progress. Previously it also waited if the pool had a checkpoint, instead of just if a checkpoint was being discarded. - Exposed zfs_initialize_chunk_size as a ZoL-style tunable. - Updated more existing tests to make use of new 'zpool wait' functionality, tests that don't exist in Delphix OS. - Used existing ZoL tunable zfs_scan_suspend_progress, together with zinject, in place of a new tunable zfs_scan_max_blks_per_txg. - Added support for a non-integral interval argument to zpool wait. Future work: ZoL has support for trimming devices, which Delphix OS does not. In the future, 'zpool wait' could be extended to add the ability to wait for trim operations to complete. Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: John Gallagher <john.gallagher@delphix.com> Closes #9162
2019-09-14 01:09:06 +00:00
CHECK(ZFS_IOC_BASE + 83 == ZFS_IOC_WAIT);
CHECK(ZFS_IOC_PLATFORM_BASE + 1 == ZFS_IOC_EVENTS_NEXT);
CHECK(ZFS_IOC_PLATFORM_BASE + 2 == ZFS_IOC_EVENTS_CLEAR);
CHECK(ZFS_IOC_PLATFORM_BASE + 3 == ZFS_IOC_EVENTS_SEEK);
CHECK(ZFS_IOC_PLATFORM_BASE + 4 == ZFS_IOC_NEXTBOOT);
CHECK(ZFS_IOC_PLATFORM_BASE + 5 == ZFS_IOC_JAIL);
CHECK(ZFS_IOC_PLATFORM_BASE + 6 == ZFS_IOC_UNJAIL);
#undef CHECK
return (result);
}
int
main(int argc, const char *argv[])
{
if (argc != 2) {
(void) fprintf(stderr, "usage: %s <pool>\n", argv[0]);
exit(2);
}
if (!validate_ioc_values()) {
(void) fprintf(stderr, "WARNING: zfs_ioc_t has binary "
"incompatible command values\n");
exit(3);
}
(void) libzfs_core_init();
zfs_fd = open(ZFS_DEV, O_RDWR);
if (zfs_fd < 0) {
(void) fprintf(stderr, "open: %s\n", strerror(errno));
libzfs_core_fini();
exit(2);
}
zfs_ioc_input_tests(argv[1]);
(void) close(zfs_fd);
libzfs_core_fini();
return (unexpected_failures);
}