Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/module/icp/include/modes/modes.h

406 lines
13 KiB
C
Raw Normal View History

Illumos Crypto Port module added to enable native encryption in zfs A port of the Illumos Crypto Framework to a Linux kernel module (found in module/icp). This is needed to do the actual encryption work. We cannot use the Linux kernel's built in crypto api because it is only exported to GPL-licensed modules. Having the ICP also means the crypto code can run on any of the other kernels under OpenZFS. I ended up porting over most of the internals of the framework, which means that porting over other API calls (if we need them) should be fairly easy. Specifically, I have ported over the API functions related to encryption, digests, macs, and crypto templates. The ICP is able to use assembly-accelerated encryption on amd64 machines and AES-NI instructions on Intel chips that support it. There are place-holder directories for similar assembly optimizations for other architectures (although they have not been written). Signed-off-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4329
2016-05-12 14:51:24 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2009 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#ifndef _COMMON_CRYPTO_MODES_H
#define _COMMON_CRYPTO_MODES_H
#ifdef __cplusplus
extern "C" {
#endif
#include <sys/zfs_context.h>
#include <sys/crypto/common.h>
#include <sys/crypto/impl.h>
ICP: Improve AES-GCM performance Currently SIMD accelerated AES-GCM performance is limited by two factors: a. The need to disable preemption and interrupts and save the FPU state before using it and to do the reverse when done. Due to the way the code is organized (see (b) below) we have to pay this price twice for each 16 byte GCM block processed. b. Most processing is done in C, operating on single GCM blocks. The use of SIMD instructions is limited to the AES encryption of the counter block (AES-NI) and the Galois multiplication (PCLMULQDQ). This leads to the FPU not being fully utilized for crypto operations. To solve (a) we do crypto processing in larger chunks while owning the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced to make this chunk size tweakable. It defaults to 32 KiB. This step alone roughly doubles performance. (b) is tackled by porting and using the highly optimized openssl AES-GCM assembler routines, which do all the processing (CTR, AES, GMULT) in a single routine. Both steps together result in up to 32x reduction of the time spend in the en/decryption routines, leading up to approximately 12x throughput increase for large (128 KiB) blocks. Lastly, this commit changes the default encryption algorithm from AES-CCM to AES-GCM when setting the `encryption=on` property. Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-By: Jason King <jason.king@joyent.com> Reviewed-By: Tom Caputi <tcaputi@datto.com> Reviewed-By: Richard Laager <rlaager@wiktel.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #9749
2020-02-10 20:59:50 +00:00
/*
* Does the build chain support all instructions needed for the GCM assembler
* routines. AVX support should imply AES-NI and PCLMULQDQ, but make sure
* anyhow.
*/
#if defined(__x86_64__) && defined(HAVE_AVX) && \
ICP: gcm-avx: Support architectures lacking the MOVBE instruction There are a couple of x86_64 architectures which support all needed features to make the accelerated GCM implementation work but the MOVBE instruction. Those are mainly Intel Sandy- and Ivy-Bridge and AMD Bulldozer, Piledriver, and Steamroller. By using MOVBE only if available and replacing it with a MOV followed by a BSWAP if not, those architectures now benefit from the new GCM routines and performance is considerably better compared to the original implementation. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam D. Moss <c@yotes.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Followup #9749 Closes #10029
2020-03-17 17:24:38 +00:00
defined(HAVE_AES) && defined(HAVE_PCLMULQDQ)
ICP: Improve AES-GCM performance Currently SIMD accelerated AES-GCM performance is limited by two factors: a. The need to disable preemption and interrupts and save the FPU state before using it and to do the reverse when done. Due to the way the code is organized (see (b) below) we have to pay this price twice for each 16 byte GCM block processed. b. Most processing is done in C, operating on single GCM blocks. The use of SIMD instructions is limited to the AES encryption of the counter block (AES-NI) and the Galois multiplication (PCLMULQDQ). This leads to the FPU not being fully utilized for crypto operations. To solve (a) we do crypto processing in larger chunks while owning the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced to make this chunk size tweakable. It defaults to 32 KiB. This step alone roughly doubles performance. (b) is tackled by porting and using the highly optimized openssl AES-GCM assembler routines, which do all the processing (CTR, AES, GMULT) in a single routine. Both steps together result in up to 32x reduction of the time spend in the en/decryption routines, leading up to approximately 12x throughput increase for large (128 KiB) blocks. Lastly, this commit changes the default encryption algorithm from AES-CCM to AES-GCM when setting the `encryption=on` property. Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-By: Jason King <jason.king@joyent.com> Reviewed-By: Tom Caputi <tcaputi@datto.com> Reviewed-By: Richard Laager <rlaager@wiktel.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #9749
2020-02-10 20:59:50 +00:00
#define CAN_USE_GCM_ASM
ICP: gcm-avx: Support architectures lacking the MOVBE instruction There are a couple of x86_64 architectures which support all needed features to make the accelerated GCM implementation work but the MOVBE instruction. Those are mainly Intel Sandy- and Ivy-Bridge and AMD Bulldozer, Piledriver, and Steamroller. By using MOVBE only if available and replacing it with a MOV followed by a BSWAP if not, those architectures now benefit from the new GCM routines and performance is considerably better compared to the original implementation. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam D. Moss <c@yotes.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Followup #9749 Closes #10029
2020-03-17 17:24:38 +00:00
extern boolean_t gcm_avx_can_use_movbe;
ICP: Improve AES-GCM performance Currently SIMD accelerated AES-GCM performance is limited by two factors: a. The need to disable preemption and interrupts and save the FPU state before using it and to do the reverse when done. Due to the way the code is organized (see (b) below) we have to pay this price twice for each 16 byte GCM block processed. b. Most processing is done in C, operating on single GCM blocks. The use of SIMD instructions is limited to the AES encryption of the counter block (AES-NI) and the Galois multiplication (PCLMULQDQ). This leads to the FPU not being fully utilized for crypto operations. To solve (a) we do crypto processing in larger chunks while owning the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced to make this chunk size tweakable. It defaults to 32 KiB. This step alone roughly doubles performance. (b) is tackled by porting and using the highly optimized openssl AES-GCM assembler routines, which do all the processing (CTR, AES, GMULT) in a single routine. Both steps together result in up to 32x reduction of the time spend in the en/decryption routines, leading up to approximately 12x throughput increase for large (128 KiB) blocks. Lastly, this commit changes the default encryption algorithm from AES-CCM to AES-GCM when setting the `encryption=on` property. Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-By: Jason King <jason.king@joyent.com> Reviewed-By: Tom Caputi <tcaputi@datto.com> Reviewed-By: Richard Laager <rlaager@wiktel.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #9749
2020-02-10 20:59:50 +00:00
#endif
Illumos Crypto Port module added to enable native encryption in zfs A port of the Illumos Crypto Framework to a Linux kernel module (found in module/icp). This is needed to do the actual encryption work. We cannot use the Linux kernel's built in crypto api because it is only exported to GPL-licensed modules. Having the ICP also means the crypto code can run on any of the other kernels under OpenZFS. I ended up porting over most of the internals of the framework, which means that porting over other API calls (if we need them) should be fairly easy. Specifically, I have ported over the API functions related to encryption, digests, macs, and crypto templates. The ICP is able to use assembly-accelerated encryption on amd64 machines and AES-NI instructions on Intel chips that support it. There are place-holder directories for similar assembly optimizations for other architectures (although they have not been written). Signed-off-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4329
2016-05-12 14:51:24 +00:00
#define ECB_MODE 0x00000002
#define CBC_MODE 0x00000004
#define CTR_MODE 0x00000008
#define CCM_MODE 0x00000010
#define GCM_MODE 0x00000020
#define GMAC_MODE 0x00000040
/*
* cc_keysched: Pointer to key schedule.
*
* cc_keysched_len: Length of the key schedule.
*
* cc_remainder: This is for residual data, i.e. data that can't
* be processed because there are too few bytes.
* Must wait until more data arrives.
*
* cc_remainder_len: Number of bytes in cc_remainder.
*
* cc_iv: Scratch buffer that sometimes contains the IV.
*
* cc_lastp: Pointer to previous block of ciphertext.
*
* cc_copy_to: Pointer to where encrypted residual data needs
* to be copied.
*
* cc_flags: PROVIDER_OWNS_KEY_SCHEDULE
* When a context is freed, it is necessary
* to know whether the key schedule was allocated
* by the caller, or internally, e.g. an init routine.
* If allocated by the latter, then it needs to be freed.
*
* ECB_MODE, CBC_MODE, CTR_MODE, or CCM_MODE
*/
struct common_ctx {
void *cc_keysched;
size_t cc_keysched_len;
uint64_t cc_iv[2];
uint64_t cc_remainder[2];
size_t cc_remainder_len;
uint8_t *cc_lastp;
uint8_t *cc_copy_to;
uint32_t cc_flags;
};
typedef struct common_ctx common_ctx_t;
typedef struct ecb_ctx {
struct common_ctx ecb_common;
uint64_t ecb_lastblock[2];
} ecb_ctx_t;
#define ecb_keysched ecb_common.cc_keysched
#define ecb_keysched_len ecb_common.cc_keysched_len
#define ecb_iv ecb_common.cc_iv
#define ecb_remainder ecb_common.cc_remainder
#define ecb_remainder_len ecb_common.cc_remainder_len
#define ecb_lastp ecb_common.cc_lastp
#define ecb_copy_to ecb_common.cc_copy_to
#define ecb_flags ecb_common.cc_flags
typedef struct cbc_ctx {
struct common_ctx cbc_common;
uint64_t cbc_lastblock[2];
} cbc_ctx_t;
#define cbc_keysched cbc_common.cc_keysched
#define cbc_keysched_len cbc_common.cc_keysched_len
#define cbc_iv cbc_common.cc_iv
#define cbc_remainder cbc_common.cc_remainder
#define cbc_remainder_len cbc_common.cc_remainder_len
#define cbc_lastp cbc_common.cc_lastp
#define cbc_copy_to cbc_common.cc_copy_to
#define cbc_flags cbc_common.cc_flags
/*
* ctr_lower_mask Bit-mask for lower 8 bytes of counter block.
* ctr_upper_mask Bit-mask for upper 8 bytes of counter block.
*/
typedef struct ctr_ctx {
struct common_ctx ctr_common;
uint64_t ctr_lower_mask;
uint64_t ctr_upper_mask;
uint32_t ctr_tmp[4];
} ctr_ctx_t;
/*
* ctr_cb Counter block.
*/
#define ctr_keysched ctr_common.cc_keysched
#define ctr_keysched_len ctr_common.cc_keysched_len
#define ctr_cb ctr_common.cc_iv
#define ctr_remainder ctr_common.cc_remainder
#define ctr_remainder_len ctr_common.cc_remainder_len
#define ctr_lastp ctr_common.cc_lastp
#define ctr_copy_to ctr_common.cc_copy_to
#define ctr_flags ctr_common.cc_flags
/*
*
* ccm_mac_len: Stores length of the MAC in CCM mode.
* ccm_mac_buf: Stores the intermediate value for MAC in CCM encrypt.
* In CCM decrypt, stores the input MAC value.
* ccm_data_len: Length of the plaintext for CCM mode encrypt, or
* length of the ciphertext for CCM mode decrypt.
* ccm_processed_data_len:
* Length of processed plaintext in CCM mode encrypt,
* or length of processed ciphertext for CCM mode decrypt.
* ccm_processed_mac_len:
* Length of MAC data accumulated in CCM mode decrypt.
*
* ccm_pt_buf: Only used in CCM mode decrypt. It stores the
* decrypted plaintext to be returned when
* MAC verification succeeds in decrypt_final.
* Memory for this should be allocated in the AES module.
*
*/
typedef struct ccm_ctx {
struct common_ctx ccm_common;
uint32_t ccm_tmp[4];
size_t ccm_mac_len;
uint64_t ccm_mac_buf[2];
size_t ccm_data_len;
size_t ccm_processed_data_len;
size_t ccm_processed_mac_len;
uint8_t *ccm_pt_buf;
uint64_t ccm_mac_input_buf[2];
uint64_t ccm_counter_mask;
} ccm_ctx_t;
#define ccm_keysched ccm_common.cc_keysched
#define ccm_keysched_len ccm_common.cc_keysched_len
#define ccm_cb ccm_common.cc_iv
#define ccm_remainder ccm_common.cc_remainder
#define ccm_remainder_len ccm_common.cc_remainder_len
#define ccm_lastp ccm_common.cc_lastp
#define ccm_copy_to ccm_common.cc_copy_to
#define ccm_flags ccm_common.cc_flags
/*
* gcm_tag_len: Length of authentication tag.
*
* gcm_ghash: Stores output from the GHASH function.
*
* gcm_processed_data_len:
* Length of processed plaintext (encrypt) or
* length of processed ciphertext (decrypt).
*
* gcm_pt_buf: Stores the decrypted plaintext returned by
* decrypt_final when the computed authentication
* tag matches the user supplied tag.
*
* gcm_pt_buf_len: Length of the plaintext buffer.
*
* gcm_H: Subkey.
*
ICP: Improve AES-GCM performance Currently SIMD accelerated AES-GCM performance is limited by two factors: a. The need to disable preemption and interrupts and save the FPU state before using it and to do the reverse when done. Due to the way the code is organized (see (b) below) we have to pay this price twice for each 16 byte GCM block processed. b. Most processing is done in C, operating on single GCM blocks. The use of SIMD instructions is limited to the AES encryption of the counter block (AES-NI) and the Galois multiplication (PCLMULQDQ). This leads to the FPU not being fully utilized for crypto operations. To solve (a) we do crypto processing in larger chunks while owning the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced to make this chunk size tweakable. It defaults to 32 KiB. This step alone roughly doubles performance. (b) is tackled by porting and using the highly optimized openssl AES-GCM assembler routines, which do all the processing (CTR, AES, GMULT) in a single routine. Both steps together result in up to 32x reduction of the time spend in the en/decryption routines, leading up to approximately 12x throughput increase for large (128 KiB) blocks. Lastly, this commit changes the default encryption algorithm from AES-CCM to AES-GCM when setting the `encryption=on` property. Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-By: Jason King <jason.king@joyent.com> Reviewed-By: Tom Caputi <tcaputi@datto.com> Reviewed-By: Richard Laager <rlaager@wiktel.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #9749
2020-02-10 20:59:50 +00:00
* gcm_Htable: Pre-computed and pre-shifted H, H^2, ... H^6 for the
* Karatsuba Algorithm in host byte order.
*
Illumos Crypto Port module added to enable native encryption in zfs A port of the Illumos Crypto Framework to a Linux kernel module (found in module/icp). This is needed to do the actual encryption work. We cannot use the Linux kernel's built in crypto api because it is only exported to GPL-licensed modules. Having the ICP also means the crypto code can run on any of the other kernels under OpenZFS. I ended up porting over most of the internals of the framework, which means that porting over other API calls (if we need them) should be fairly easy. Specifically, I have ported over the API functions related to encryption, digests, macs, and crypto templates. The ICP is able to use assembly-accelerated encryption on amd64 machines and AES-NI instructions on Intel chips that support it. There are place-holder directories for similar assembly optimizations for other architectures (although they have not been written). Signed-off-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4329
2016-05-12 14:51:24 +00:00
* gcm_J0: Pre-counter block generated from the IV.
*
* gcm_len_a_len_c: 64-bit representations of the bit lengths of
* AAD and ciphertext.
*/
typedef struct gcm_ctx {
struct common_ctx gcm_common;
size_t gcm_tag_len;
size_t gcm_processed_data_len;
size_t gcm_pt_buf_len;
uint32_t gcm_tmp[4];
ICP: Improve AES-GCM performance Currently SIMD accelerated AES-GCM performance is limited by two factors: a. The need to disable preemption and interrupts and save the FPU state before using it and to do the reverse when done. Due to the way the code is organized (see (b) below) we have to pay this price twice for each 16 byte GCM block processed. b. Most processing is done in C, operating on single GCM blocks. The use of SIMD instructions is limited to the AES encryption of the counter block (AES-NI) and the Galois multiplication (PCLMULQDQ). This leads to the FPU not being fully utilized for crypto operations. To solve (a) we do crypto processing in larger chunks while owning the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced to make this chunk size tweakable. It defaults to 32 KiB. This step alone roughly doubles performance. (b) is tackled by porting and using the highly optimized openssl AES-GCM assembler routines, which do all the processing (CTR, AES, GMULT) in a single routine. Both steps together result in up to 32x reduction of the time spend in the en/decryption routines, leading up to approximately 12x throughput increase for large (128 KiB) blocks. Lastly, this commit changes the default encryption algorithm from AES-CCM to AES-GCM when setting the `encryption=on` property. Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-By: Jason King <jason.king@joyent.com> Reviewed-By: Tom Caputi <tcaputi@datto.com> Reviewed-By: Richard Laager <rlaager@wiktel.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #9749
2020-02-10 20:59:50 +00:00
/*
ICP: gcm: Allocate hash subkey table separately While evaluating other assembler implementations it turns out that the precomputed hash subkey tables vary in size, from 8*16 bytes (avx2/avx512) up to 48*16 bytes (avx512-vaes), depending on the implementation. To be able to handle the size differences later, allocate `gcm_Htable` dynamically rather then having a fixed size array, and adapt consumers. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #11102
2020-10-30 22:24:21 +00:00
* The offset of gcm_Htable relative to gcm_ghash, (32), is hard coded
* in aesni-gcm-x86_64.S, so please don't change (or adjust there).
ICP: Improve AES-GCM performance Currently SIMD accelerated AES-GCM performance is limited by two factors: a. The need to disable preemption and interrupts and save the FPU state before using it and to do the reverse when done. Due to the way the code is organized (see (b) below) we have to pay this price twice for each 16 byte GCM block processed. b. Most processing is done in C, operating on single GCM blocks. The use of SIMD instructions is limited to the AES encryption of the counter block (AES-NI) and the Galois multiplication (PCLMULQDQ). This leads to the FPU not being fully utilized for crypto operations. To solve (a) we do crypto processing in larger chunks while owning the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced to make this chunk size tweakable. It defaults to 32 KiB. This step alone roughly doubles performance. (b) is tackled by porting and using the highly optimized openssl AES-GCM assembler routines, which do all the processing (CTR, AES, GMULT) in a single routine. Both steps together result in up to 32x reduction of the time spend in the en/decryption routines, leading up to approximately 12x throughput increase for large (128 KiB) blocks. Lastly, this commit changes the default encryption algorithm from AES-CCM to AES-GCM when setting the `encryption=on` property. Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-By: Jason King <jason.king@joyent.com> Reviewed-By: Tom Caputi <tcaputi@datto.com> Reviewed-By: Richard Laager <rlaager@wiktel.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #9749
2020-02-10 20:59:50 +00:00
*/
Illumos Crypto Port module added to enable native encryption in zfs A port of the Illumos Crypto Framework to a Linux kernel module (found in module/icp). This is needed to do the actual encryption work. We cannot use the Linux kernel's built in crypto api because it is only exported to GPL-licensed modules. Having the ICP also means the crypto code can run on any of the other kernels under OpenZFS. I ended up porting over most of the internals of the framework, which means that porting over other API calls (if we need them) should be fairly easy. Specifically, I have ported over the API functions related to encryption, digests, macs, and crypto templates. The ICP is able to use assembly-accelerated encryption on amd64 machines and AES-NI instructions on Intel chips that support it. There are place-holder directories for similar assembly optimizations for other architectures (although they have not been written). Signed-off-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4329
2016-05-12 14:51:24 +00:00
uint64_t gcm_ghash[2];
uint64_t gcm_H[2];
ICP: Improve AES-GCM performance Currently SIMD accelerated AES-GCM performance is limited by two factors: a. The need to disable preemption and interrupts and save the FPU state before using it and to do the reverse when done. Due to the way the code is organized (see (b) below) we have to pay this price twice for each 16 byte GCM block processed. b. Most processing is done in C, operating on single GCM blocks. The use of SIMD instructions is limited to the AES encryption of the counter block (AES-NI) and the Galois multiplication (PCLMULQDQ). This leads to the FPU not being fully utilized for crypto operations. To solve (a) we do crypto processing in larger chunks while owning the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced to make this chunk size tweakable. It defaults to 32 KiB. This step alone roughly doubles performance. (b) is tackled by porting and using the highly optimized openssl AES-GCM assembler routines, which do all the processing (CTR, AES, GMULT) in a single routine. Both steps together result in up to 32x reduction of the time spend in the en/decryption routines, leading up to approximately 12x throughput increase for large (128 KiB) blocks. Lastly, this commit changes the default encryption algorithm from AES-CCM to AES-GCM when setting the `encryption=on` property. Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-By: Jason King <jason.king@joyent.com> Reviewed-By: Tom Caputi <tcaputi@datto.com> Reviewed-By: Richard Laager <rlaager@wiktel.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #9749
2020-02-10 20:59:50 +00:00
#ifdef CAN_USE_GCM_ASM
ICP: gcm: Allocate hash subkey table separately While evaluating other assembler implementations it turns out that the precomputed hash subkey tables vary in size, from 8*16 bytes (avx2/avx512) up to 48*16 bytes (avx512-vaes), depending on the implementation. To be able to handle the size differences later, allocate `gcm_Htable` dynamically rather then having a fixed size array, and adapt consumers. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #11102
2020-10-30 22:24:21 +00:00
uint64_t *gcm_Htable;
size_t gcm_htab_len;
ICP: Improve AES-GCM performance Currently SIMD accelerated AES-GCM performance is limited by two factors: a. The need to disable preemption and interrupts and save the FPU state before using it and to do the reverse when done. Due to the way the code is organized (see (b) below) we have to pay this price twice for each 16 byte GCM block processed. b. Most processing is done in C, operating on single GCM blocks. The use of SIMD instructions is limited to the AES encryption of the counter block (AES-NI) and the Galois multiplication (PCLMULQDQ). This leads to the FPU not being fully utilized for crypto operations. To solve (a) we do crypto processing in larger chunks while owning the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced to make this chunk size tweakable. It defaults to 32 KiB. This step alone roughly doubles performance. (b) is tackled by porting and using the highly optimized openssl AES-GCM assembler routines, which do all the processing (CTR, AES, GMULT) in a single routine. Both steps together result in up to 32x reduction of the time spend in the en/decryption routines, leading up to approximately 12x throughput increase for large (128 KiB) blocks. Lastly, this commit changes the default encryption algorithm from AES-CCM to AES-GCM when setting the `encryption=on` property. Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-By: Jason King <jason.king@joyent.com> Reviewed-By: Tom Caputi <tcaputi@datto.com> Reviewed-By: Richard Laager <rlaager@wiktel.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #9749
2020-02-10 20:59:50 +00:00
#endif
Illumos Crypto Port module added to enable native encryption in zfs A port of the Illumos Crypto Framework to a Linux kernel module (found in module/icp). This is needed to do the actual encryption work. We cannot use the Linux kernel's built in crypto api because it is only exported to GPL-licensed modules. Having the ICP also means the crypto code can run on any of the other kernels under OpenZFS. I ended up porting over most of the internals of the framework, which means that porting over other API calls (if we need them) should be fairly easy. Specifically, I have ported over the API functions related to encryption, digests, macs, and crypto templates. The ICP is able to use assembly-accelerated encryption on amd64 machines and AES-NI instructions on Intel chips that support it. There are place-holder directories for similar assembly optimizations for other architectures (although they have not been written). Signed-off-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4329
2016-05-12 14:51:24 +00:00
uint64_t gcm_J0[2];
uint64_t gcm_len_a_len_c[2];
uint8_t *gcm_pt_buf;
ICP: Improve AES-GCM performance Currently SIMD accelerated AES-GCM performance is limited by two factors: a. The need to disable preemption and interrupts and save the FPU state before using it and to do the reverse when done. Due to the way the code is organized (see (b) below) we have to pay this price twice for each 16 byte GCM block processed. b. Most processing is done in C, operating on single GCM blocks. The use of SIMD instructions is limited to the AES encryption of the counter block (AES-NI) and the Galois multiplication (PCLMULQDQ). This leads to the FPU not being fully utilized for crypto operations. To solve (a) we do crypto processing in larger chunks while owning the FPU. An `icp_gcm_avx_chunk_size` module parameter was introduced to make this chunk size tweakable. It defaults to 32 KiB. This step alone roughly doubles performance. (b) is tackled by porting and using the highly optimized openssl AES-GCM assembler routines, which do all the processing (CTR, AES, GMULT) in a single routine. Both steps together result in up to 32x reduction of the time spend in the en/decryption routines, leading up to approximately 12x throughput increase for large (128 KiB) blocks. Lastly, this commit changes the default encryption algorithm from AES-CCM to AES-GCM when setting the `encryption=on` property. Reviewed-By: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-By: Jason King <jason.king@joyent.com> Reviewed-By: Tom Caputi <tcaputi@datto.com> Reviewed-By: Richard Laager <rlaager@wiktel.com> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #9749
2020-02-10 20:59:50 +00:00
#ifdef CAN_USE_GCM_ASM
boolean_t gcm_use_avx;
#endif
Illumos Crypto Port module added to enable native encryption in zfs A port of the Illumos Crypto Framework to a Linux kernel module (found in module/icp). This is needed to do the actual encryption work. We cannot use the Linux kernel's built in crypto api because it is only exported to GPL-licensed modules. Having the ICP also means the crypto code can run on any of the other kernels under OpenZFS. I ended up porting over most of the internals of the framework, which means that porting over other API calls (if we need them) should be fairly easy. Specifically, I have ported over the API functions related to encryption, digests, macs, and crypto templates. The ICP is able to use assembly-accelerated encryption on amd64 machines and AES-NI instructions on Intel chips that support it. There are place-holder directories for similar assembly optimizations for other architectures (although they have not been written). Signed-off-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4329
2016-05-12 14:51:24 +00:00
} gcm_ctx_t;
#define gcm_keysched gcm_common.cc_keysched
#define gcm_keysched_len gcm_common.cc_keysched_len
#define gcm_cb gcm_common.cc_iv
#define gcm_remainder gcm_common.cc_remainder
#define gcm_remainder_len gcm_common.cc_remainder_len
#define gcm_lastp gcm_common.cc_lastp
#define gcm_copy_to gcm_common.cc_copy_to
#define gcm_flags gcm_common.cc_flags
#define AES_GMAC_IV_LEN 12
#define AES_GMAC_TAG_BITS 128
typedef struct aes_ctx {
union {
ecb_ctx_t acu_ecb;
cbc_ctx_t acu_cbc;
ctr_ctx_t acu_ctr;
ccm_ctx_t acu_ccm;
gcm_ctx_t acu_gcm;
} acu;
} aes_ctx_t;
#define ac_flags acu.acu_ecb.ecb_common.cc_flags
#define ac_remainder_len acu.acu_ecb.ecb_common.cc_remainder_len
#define ac_keysched acu.acu_ecb.ecb_common.cc_keysched
#define ac_keysched_len acu.acu_ecb.ecb_common.cc_keysched_len
#define ac_iv acu.acu_ecb.ecb_common.cc_iv
#define ac_lastp acu.acu_ecb.ecb_common.cc_lastp
#define ac_pt_buf acu.acu_ccm.ccm_pt_buf
#define ac_mac_len acu.acu_ccm.ccm_mac_len
#define ac_data_len acu.acu_ccm.ccm_data_len
#define ac_processed_mac_len acu.acu_ccm.ccm_processed_mac_len
#define ac_processed_data_len acu.acu_ccm.ccm_processed_data_len
#define ac_tag_len acu.acu_gcm.gcm_tag_len
typedef struct blowfish_ctx {
union {
ecb_ctx_t bcu_ecb;
cbc_ctx_t bcu_cbc;
} bcu;
} blowfish_ctx_t;
#define bc_flags bcu.bcu_ecb.ecb_common.cc_flags
#define bc_remainder_len bcu.bcu_ecb.ecb_common.cc_remainder_len
#define bc_keysched bcu.bcu_ecb.ecb_common.cc_keysched
#define bc_keysched_len bcu.bcu_ecb.ecb_common.cc_keysched_len
#define bc_iv bcu.bcu_ecb.ecb_common.cc_iv
#define bc_lastp bcu.bcu_ecb.ecb_common.cc_lastp
typedef struct des_ctx {
union {
ecb_ctx_t dcu_ecb;
cbc_ctx_t dcu_cbc;
} dcu;
} des_ctx_t;
#define dc_flags dcu.dcu_ecb.ecb_common.cc_flags
#define dc_remainder_len dcu.dcu_ecb.ecb_common.cc_remainder_len
#define dc_keysched dcu.dcu_ecb.ecb_common.cc_keysched
#define dc_keysched_len dcu.dcu_ecb.ecb_common.cc_keysched_len
#define dc_iv dcu.dcu_ecb.ecb_common.cc_iv
#define dc_lastp dcu.dcu_ecb.ecb_common.cc_lastp
extern int ecb_cipher_contiguous_blocks(ecb_ctx_t *, char *, size_t,
crypto_data_t *, size_t, int (*cipher)(const void *, const uint8_t *,
uint8_t *));
extern int cbc_encrypt_contiguous_blocks(cbc_ctx_t *, char *, size_t,
crypto_data_t *, size_t,
int (*encrypt)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int cbc_decrypt_contiguous_blocks(cbc_ctx_t *, char *, size_t,
crypto_data_t *, size_t,
int (*decrypt)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int ctr_mode_contiguous_blocks(ctr_ctx_t *, char *, size_t,
crypto_data_t *, size_t,
int (*cipher)(const void *, const uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int ccm_mode_encrypt_contiguous_blocks(ccm_ctx_t *, char *, size_t,
crypto_data_t *, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int ccm_mode_decrypt_contiguous_blocks(ccm_ctx_t *, char *, size_t,
crypto_data_t *, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int gcm_mode_encrypt_contiguous_blocks(gcm_ctx_t *, char *, size_t,
crypto_data_t *, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int gcm_mode_decrypt_contiguous_blocks(gcm_ctx_t *, char *, size_t,
crypto_data_t *, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
int ccm_encrypt_final(ccm_ctx_t *, crypto_data_t *, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
int gcm_encrypt_final(gcm_ctx_t *, crypto_data_t *, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int ccm_decrypt_final(ccm_ctx_t *, crypto_data_t *, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int gcm_decrypt_final(gcm_ctx_t *, crypto_data_t *, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int ctr_mode_final(ctr_ctx_t *, crypto_data_t *,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *));
extern int cbc_init_ctx(cbc_ctx_t *, char *, size_t, size_t,
void (*copy_block)(uint8_t *, uint64_t *));
extern int ctr_init_ctx(ctr_ctx_t *, ulong_t, uint8_t *,
void (*copy_block)(uint8_t *, uint8_t *));
extern int ccm_init_ctx(ccm_ctx_t *, char *, int, boolean_t, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int gcm_init_ctx(gcm_ctx_t *, char *, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern int gmac_init_ctx(gcm_ctx_t *, char *, size_t,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *),
void (*copy_block)(uint8_t *, uint8_t *),
void (*xor_block)(uint8_t *, uint8_t *));
extern void calculate_ccm_mac(ccm_ctx_t *, uint8_t *,
int (*encrypt_block)(const void *, const uint8_t *, uint8_t *));
extern void gcm_mul(uint64_t *, uint64_t *, uint64_t *);
extern void crypto_init_ptrs(crypto_data_t *, void **, offset_t *);
extern void crypto_get_ptrs(crypto_data_t *, void **, offset_t *,
uint8_t **, size_t *, uint8_t **, size_t);
extern void *ecb_alloc_ctx(int);
extern void *cbc_alloc_ctx(int);
extern void *ctr_alloc_ctx(int);
extern void *ccm_alloc_ctx(int);
extern void *gcm_alloc_ctx(int);
extern void *gmac_alloc_ctx(int);
extern void crypto_free_mode_ctx(void *);
#ifdef __cplusplus
}
#endif
#endif /* _COMMON_CRYPTO_MODES_H */