Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/config/kernel-blk-queue-unplug.m4

55 lines
1.3 KiB
Plaintext
Raw Normal View History

Fix sync behavior for disk vdevs Prior to b39c22b, which was first generally available in the 0.6.5 release as b39c22b, ZoL never actually submitted synchronous read or write requests to the Linux block layer. This means the vdev_disk_dio_is_sync() function had always returned false and, therefore, the completion in dio_request_t.dr_comp was never actually used. In b39c22b, synchronous ZIO operations were translated to synchronous BIO requests in vdev_disk_io_start(). The follow-on commits 5592404 and aa159af fixed several problems introduced by b39c22b. In particular, 5592404 introduced the new flag parameter "wait" to __vdev_disk_physio() but under ZoL, since vdev_disk_physio() is never actually used, the wait flag was always zero so the new code had no effect other than to cause a bug in the use of the dio_request_t.dr_comp which was fixed by aa159af. The original rationale for introducing synchronous operations in b39c22b was to hurry certains requests through the BIO layer which would have otherwise been subject to its unplug timer which would increase the latency. This behavior of the unplug timer, however, went away during the transition of the plug/unplug system between kernels 2.6.32 and 2.6.39. To handle the unplug timer behavior on 2.6.32-2.6.35 kernels the BIO_RW_UNPLUG flag is used as a hint to suppress the plugging behavior. For kernels 2.6.36-2.6.38, the REQ_UNPLUG macro will be available and ise used for the same purpose. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4858
2016-07-08 15:33:01 +00:00
dnl #
dnl # 2.6.32-2.6.35 API - The BIO_RW_UNPLUG enum can be used as a hint
dnl # to unplug the queue.
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_BIO_RW_UNPLUG], [
ZFS_LINUX_TEST_SRC([blk_queue_bio_rw_unplug], [
Fix sync behavior for disk vdevs Prior to b39c22b, which was first generally available in the 0.6.5 release as b39c22b, ZoL never actually submitted synchronous read or write requests to the Linux block layer. This means the vdev_disk_dio_is_sync() function had always returned false and, therefore, the completion in dio_request_t.dr_comp was never actually used. In b39c22b, synchronous ZIO operations were translated to synchronous BIO requests in vdev_disk_io_start(). The follow-on commits 5592404 and aa159af fixed several problems introduced by b39c22b. In particular, 5592404 introduced the new flag parameter "wait" to __vdev_disk_physio() but under ZoL, since vdev_disk_physio() is never actually used, the wait flag was always zero so the new code had no effect other than to cause a bug in the use of the dio_request_t.dr_comp which was fixed by aa159af. The original rationale for introducing synchronous operations in b39c22b was to hurry certains requests through the BIO layer which would have otherwise been subject to its unplug timer which would increase the latency. This behavior of the unplug timer, however, went away during the transition of the plug/unplug system between kernels 2.6.32 and 2.6.39. To handle the unplug timer behavior on 2.6.32-2.6.35 kernels the BIO_RW_UNPLUG flag is used as a hint to suppress the plugging behavior. For kernels 2.6.36-2.6.38, the REQ_UNPLUG macro will be available and ise used for the same purpose. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4858
2016-07-08 15:33:01 +00:00
#include <linux/blkdev.h>
],[
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
enum bio_rw_flags rw __attribute__ ((unused)) = BIO_RW_UNPLUG;
])
])
Fix sync behavior for disk vdevs Prior to b39c22b, which was first generally available in the 0.6.5 release as b39c22b, ZoL never actually submitted synchronous read or write requests to the Linux block layer. This means the vdev_disk_dio_is_sync() function had always returned false and, therefore, the completion in dio_request_t.dr_comp was never actually used. In b39c22b, synchronous ZIO operations were translated to synchronous BIO requests in vdev_disk_io_start(). The follow-on commits 5592404 and aa159af fixed several problems introduced by b39c22b. In particular, 5592404 introduced the new flag parameter "wait" to __vdev_disk_physio() but under ZoL, since vdev_disk_physio() is never actually used, the wait flag was always zero so the new code had no effect other than to cause a bug in the use of the dio_request_t.dr_comp which was fixed by aa159af. The original rationale for introducing synchronous operations in b39c22b was to hurry certains requests through the BIO layer which would have otherwise been subject to its unplug timer which would increase the latency. This behavior of the unplug timer, however, went away during the transition of the plug/unplug system between kernels 2.6.32 and 2.6.39. To handle the unplug timer behavior on 2.6.32-2.6.35 kernels the BIO_RW_UNPLUG flag is used as a hint to suppress the plugging behavior. For kernels 2.6.36-2.6.38, the REQ_UNPLUG macro will be available and ise used for the same purpose. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4858
2016-07-08 15:33:01 +00:00
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
AC_DEFUN([ZFS_AC_KERNEL_BIO_RW_UNPLUG], [
AC_MSG_CHECKING([whether the BIO_RW_UNPLUG enum is available])
ZFS_LINUX_TEST_RESULT([blk_queue_bio_rw_unplug], [
Fix sync behavior for disk vdevs Prior to b39c22b, which was first generally available in the 0.6.5 release as b39c22b, ZoL never actually submitted synchronous read or write requests to the Linux block layer. This means the vdev_disk_dio_is_sync() function had always returned false and, therefore, the completion in dio_request_t.dr_comp was never actually used. In b39c22b, synchronous ZIO operations were translated to synchronous BIO requests in vdev_disk_io_start(). The follow-on commits 5592404 and aa159af fixed several problems introduced by b39c22b. In particular, 5592404 introduced the new flag parameter "wait" to __vdev_disk_physio() but under ZoL, since vdev_disk_physio() is never actually used, the wait flag was always zero so the new code had no effect other than to cause a bug in the use of the dio_request_t.dr_comp which was fixed by aa159af. The original rationale for introducing synchronous operations in b39c22b was to hurry certains requests through the BIO layer which would have otherwise been subject to its unplug timer which would increase the latency. This behavior of the unplug timer, however, went away during the transition of the plug/unplug system between kernels 2.6.32 and 2.6.39. To handle the unplug timer behavior on 2.6.32-2.6.35 kernels the BIO_RW_UNPLUG flag is used as a hint to suppress the plugging behavior. For kernels 2.6.36-2.6.38, the REQ_UNPLUG macro will be available and ise used for the same purpose. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4858
2016-07-08 15:33:01 +00:00
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_HAVE_BIO_RW_UNPLUG, 1,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
[BIO_RW_UNPLUG is available])
Fix sync behavior for disk vdevs Prior to b39c22b, which was first generally available in the 0.6.5 release as b39c22b, ZoL never actually submitted synchronous read or write requests to the Linux block layer. This means the vdev_disk_dio_is_sync() function had always returned false and, therefore, the completion in dio_request_t.dr_comp was never actually used. In b39c22b, synchronous ZIO operations were translated to synchronous BIO requests in vdev_disk_io_start(). The follow-on commits 5592404 and aa159af fixed several problems introduced by b39c22b. In particular, 5592404 introduced the new flag parameter "wait" to __vdev_disk_physio() but under ZoL, since vdev_disk_physio() is never actually used, the wait flag was always zero so the new code had no effect other than to cause a bug in the use of the dio_request_t.dr_comp which was fixed by aa159af. The original rationale for introducing synchronous operations in b39c22b was to hurry certains requests through the BIO layer which would have otherwise been subject to its unplug timer which would increase the latency. This behavior of the unplug timer, however, went away during the transition of the plug/unplug system between kernels 2.6.32 and 2.6.39. To handle the unplug timer behavior on 2.6.32-2.6.35 kernels the BIO_RW_UNPLUG flag is used as a hint to suppress the plugging behavior. For kernels 2.6.36-2.6.38, the REQ_UNPLUG macro will be available and ise used for the same purpose. Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4858
2016-07-08 15:33:01 +00:00
],[
AC_MSG_RESULT(no)
])
])
Explicit block device plugging when submitting multiple BIOs Without plugging, the default 'noop' scheduler will not merge the BIOs which are part of a large ZIO. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Isaac Huang <he.huang@intel.com> Closes #5181
2016-09-29 20:13:31 +00:00
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_PLUG], [
ZFS_LINUX_TEST_SRC([blk_plug], [
Explicit block device plugging when submitting multiple BIOs Without plugging, the default 'noop' scheduler will not merge the BIOs which are part of a large ZIO. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Isaac Huang <he.huang@intel.com> Closes #5181
2016-09-29 20:13:31 +00:00
#include <linux/blkdev.h>
],[
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
struct blk_plug plug __attribute__ ((unused));
Explicit block device plugging when submitting multiple BIOs Without plugging, the default 'noop' scheduler will not merge the BIOs which are part of a large ZIO. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Isaac Huang <he.huang@intel.com> Closes #5181
2016-09-29 20:13:31 +00:00
blk_start_plug(&plug);
blk_finish_plug(&plug);
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
])
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_PLUG], [
AC_MSG_CHECKING([whether struct blk_plug is available])
ZFS_LINUX_TEST_RESULT([blk_plug], [
Explicit block device plugging when submitting multiple BIOs Without plugging, the default 'noop' scheduler will not merge the BIOs which are part of a large ZIO. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Isaac Huang <he.huang@intel.com> Closes #5181
2016-09-29 20:13:31 +00:00
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BLK_QUEUE_HAVE_BLK_PLUG, 1,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
[struct blk_plug is available])
Explicit block device plugging when submitting multiple BIOs Without plugging, the default 'noop' scheduler will not merge the BIOs which are part of a large ZIO. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Isaac Huang <he.huang@intel.com> Closes #5181
2016-09-29 20:13:31 +00:00
],[
AC_MSG_RESULT(no)
])
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
])
AC_DEFUN([ZFS_AC_KERNEL_SRC_BLK_QUEUE_PLUG], [
ZFS_AC_KERNEL_SRC_BIO_RW_UNPLUG
ZFS_AC_KERNEL_SRC_BLK_PLUG
])
AC_DEFUN([ZFS_AC_KERNEL_BLK_QUEUE_PLUG], [
ZFS_AC_KERNEL_BIO_RW_UNPLUG
ZFS_AC_KERNEL_BLK_PLUG
Explicit block device plugging when submitting multiple BIOs Without plugging, the default 'noop' scheduler will not merge the BIOs which are part of a large ZIO. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Isaac Huang <he.huang@intel.com> Closes #5181
2016-09-29 20:13:31 +00:00
])