Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/config/kernel-bdev-physical-size.m4

41 lines
1.5 KiB
Plaintext
Raw Normal View History

Improve AF hard disk detection Use the bdev_physical_block_size() interface to determine the minimize write size which can be issued without incurring a read-modify-write operation. This is used to set the ashift correctly to prevent a performance penalty when using AF hard disks. Unfortunately, this interface isn't entirely reliable because it's not uncommon for disks to misreport this value. For this reason you may still need to manually set your ashift with: zpool create -o ashift=12 ... The solution to this in the upstream Illumos source was to add a white list of known offending drives. Maintaining such a list will be a burden, but it still may be worth doing if we can detect a large number of these drives. This should be considered as future work. Reported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #916
2012-09-02 23:34:12 +00:00
dnl #
dnl # 2.6.30 API change
dnl #
dnl # The bdev_physical_block_size() interface was added to provide a way
dnl # to determine the smallest write which can be performed without a
dnl # read-modify-write operation. From the kernel documentation:
dnl #
dnl # What: /sys/block/<disk>/queue/physical_block_size
dnl # Date: May 2009
dnl # Contact: Martin K. Petersen <martin.petersen@oracle.com>
dnl # Description:
dnl # This is the smallest unit the storage device can write
dnl # without resorting to read-modify-write operation. It is
dnl # usually the same as the logical block size but may be
dnl # bigger. One example is SATA drives with 4KB sectors
dnl # that expose a 512-byte logical block size to the
dnl # operating system.
dnl #
dnl # Unfortunately, this interface isn't entirely reliable because
dnl # drives are sometimes known to misreport this value.
dnl #
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
AC_DEFUN([ZFS_AC_KERNEL_SRC_BDEV_PHYSICAL_BLOCK_SIZE], [
ZFS_LINUX_TEST_SRC([bdev_physical_block_size], [
Improve AF hard disk detection Use the bdev_physical_block_size() interface to determine the minimize write size which can be issued without incurring a read-modify-write operation. This is used to set the ashift correctly to prevent a performance penalty when using AF hard disks. Unfortunately, this interface isn't entirely reliable because it's not uncommon for disks to misreport this value. For this reason you may still need to manually set your ashift with: zpool create -o ashift=12 ... The solution to this in the upstream Illumos source was to add a white list of known offending drives. Maintaining such a list will be a burden, but it still may be worth doing if we can detect a large number of these drives. This should be considered as future work. Reported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #916
2012-09-02 23:34:12 +00:00
#include <linux/blkdev.h>
],[
struct block_device *bdev = NULL;
bdev_physical_block_size(bdev);
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
], [$NO_UNUSED_BUT_SET_VARIABLE])
])
AC_DEFUN([ZFS_AC_KERNEL_BDEV_PHYSICAL_BLOCK_SIZE], [
AC_MSG_CHECKING([whether bdev_physical_block_size() is available])
ZFS_LINUX_TEST_RESULT([bdev_physical_block_size], [
Improve AF hard disk detection Use the bdev_physical_block_size() interface to determine the minimize write size which can be issued without incurring a read-modify-write operation. This is used to set the ashift correctly to prevent a performance penalty when using AF hard disks. Unfortunately, this interface isn't entirely reliable because it's not uncommon for disks to misreport this value. For this reason you may still need to manually set your ashift with: zpool create -o ashift=12 ... The solution to this in the upstream Illumos source was to add a white list of known offending drives. Maintaining such a list will be a burden, but it still may be worth doing if we can detect a large number of these drives. This should be considered as future work. Reported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #916
2012-09-02 23:34:12 +00:00
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_BDEV_PHYSICAL_BLOCK_SIZE, 1,
Perform KABI checks in parallel Reduce the time required for ./configure to perform the needed KABI checks by allowing kbuild to compile multiple test cases in parallel. This was accomplished by splitting each test's source code from the logic handling whether that code could be compiled or not. By introducing this split it's possible to minimize the number of times kbuild needs to be invoked. As importantly, it means all of the tests can be built in parallel. This does require a little extra care since we expect some tests to fail, so the --keep-going (-k) option must be provided otherwise some tests may not get compiled. Furthermore, since a failure during the kbuild modpost phase will result in an early exit; the final linking phase is limited to tests which passed the initial compilation and produced an object file. Once everything has been built the configure script proceeds as previously. The only significant difference is that it now merely needs to test for the existence of a .ko file to determine the result of a given test. This vastly speeds up the entire process. New test cases should use ZFS_LINUX_TEST_SRC to declare their test source code and ZFS_LINUX_TEST_RESULT to check the result. All of the existing kernel-*.m4 files have been updated accordingly, see config/kernel-current-time.m4 for a basic example. The legacy ZFS_LINUX_TRY_COMPILE macro has been kept to handle special cases but it's use is not encouraged. master (secs) patched (secs) ------------- ---------------- autogen.sh 61 68 configure 137 24 (~17% of current run time) make -j $(nproc) 44 44 make rpms 287 150 Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #8547 Closes #9132 Closes #9341 Conflicts: Makefile.am config/kernel-fpu.m4
2019-10-01 19:50:34 +00:00
[bdev_physical_block_size() is available])
Improve AF hard disk detection Use the bdev_physical_block_size() interface to determine the minimize write size which can be issued without incurring a read-modify-write operation. This is used to set the ashift correctly to prevent a performance penalty when using AF hard disks. Unfortunately, this interface isn't entirely reliable because it's not uncommon for disks to misreport this value. For this reason you may still need to manually set your ashift with: zpool create -o ashift=12 ... The solution to this in the upstream Illumos source was to add a white list of known offending drives. Maintaining such a list will be a burden, but it still may be worth doing if we can detect a large number of these drives. This should be considered as future work. Reported-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #916
2012-09-02 23:34:12 +00:00
],[
AC_MSG_RESULT(no)
])
])