Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/cmd/zed/agents/zfs_retire.c

567 lines
14 KiB
C
Raw Normal View History

Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved.
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
*
* Copyright (c) 2016, Intel Corporation.
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
* Copyright (c) 2018, loli10K <ezomori.nozomu@gmail.com>
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
*/
/*
* The ZFS retire agent is responsible for managing hot spares across all pools.
* When we see a device fault or a device removal, we try to open the associated
* pool and look for any hot spares. We iterate over any available hot spares
* and attempt a 'zpool replace' for each one.
*
* For vdevs diagnosed as faulty, the agent is also responsible for proactively
* marking the vdev FAULTY (for I/O errors) or DEGRADED (for checksum errors).
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
*/
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
#include <sys/fs/zfs.h>
#include <sys/fm/protocol.h>
#include <sys/fm/fs/zfs.h>
Forbid basename(3) and dirname(3) There are at least two interpretations of basename(3), in addition to both functions being allowed to /both/ return a static buffer (unsuitable in multi-threaded environments) /and/ raze the input (which encourages overallocations, at best) Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #12105
2021-05-22 15:19:14 +00:00
#include <libzutil.h>
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
#include <libzfs.h>
#include <string.h>
Upstream: Add snapshot and zvol events For kernel to send snapshot mount/unmount events to zed. For kernel to send symlink creates/removes on zvol plumbing. (/dev/run/dsk/zvol/$pool/$zvol -> /dev/diskX) If zed misses the ENODEV, all errors after are EINVAL. Treat any error as kernel module failure. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Jorgen Lundman <lundman@lundman.net> Closes #12416
2021-09-09 17:44:21 +00:00
#include <libgen.h>
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
#include "zfs_agents.h"
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
#include "fmd_api.h"
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
typedef struct zfs_retire_repaired {
struct zfs_retire_repaired *zrr_next;
uint64_t zrr_pool;
uint64_t zrr_vdev;
} zfs_retire_repaired_t;
typedef struct zfs_retire_data {
libzfs_handle_t *zrd_hdl;
zfs_retire_repaired_t *zrd_repaired;
} zfs_retire_data_t;
static void
zfs_retire_clear_data(fmd_hdl_t *hdl, zfs_retire_data_t *zdp)
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
{
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
zfs_retire_repaired_t *zrp;
while ((zrp = zdp->zrd_repaired) != NULL) {
zdp->zrd_repaired = zrp->zrr_next;
fmd_hdl_free(hdl, zrp, sizeof (zfs_retire_repaired_t));
}
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
}
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
/*
* Find a pool with a matching GUID.
*/
typedef struct find_cbdata {
uint64_t cb_guid;
zpool_handle_t *cb_zhp;
nvlist_t *cb_vdev;
} find_cbdata_t;
static int
find_pool(zpool_handle_t *zhp, void *data)
{
find_cbdata_t *cbp = data;
if (cbp->cb_guid ==
zpool_get_prop_int(zhp, ZPOOL_PROP_GUID, NULL)) {
cbp->cb_zhp = zhp;
return (1);
}
zpool_close(zhp);
return (0);
}
/*
* Find a vdev within a tree with a matching GUID.
*/
static nvlist_t *
Remove FRU and LIBTOPO Support FRU and LIBTOPO support are illumos only features that will not be ported to Linux and make the code more complicated than necessary. This commit makes way for further cleanups of the zed/FMA code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: David Quigley <david.quigley@intel.com> Closes #6641
2017-09-19 00:06:40 +00:00
find_vdev(libzfs_handle_t *zhdl, nvlist_t *nv, uint64_t search_guid)
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
{
uint64_t guid;
nvlist_t **child;
uint_t c, children;
nvlist_t *ret;
Remove FRU and LIBTOPO Support FRU and LIBTOPO support are illumos only features that will not be ported to Linux and make the code more complicated than necessary. This commit makes way for further cleanups of the zed/FMA code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: David Quigley <david.quigley@intel.com> Closes #6641
2017-09-19 00:06:40 +00:00
if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &guid) == 0 &&
guid == search_guid) {
fmd_hdl_debug(fmd_module_hdl("zfs-retire"),
"matched vdev %llu", guid);
return (nv);
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
}
if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN,
&child, &children) != 0)
return (NULL);
for (c = 0; c < children; c++) {
Remove FRU and LIBTOPO Support FRU and LIBTOPO support are illumos only features that will not be ported to Linux and make the code more complicated than necessary. This commit makes way for further cleanups of the zed/FMA code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: David Quigley <david.quigley@intel.com> Closes #6641
2017-09-19 00:06:40 +00:00
if ((ret = find_vdev(zhdl, child[c], search_guid)) != NULL)
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
return (ret);
}
if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_L2CACHE,
&child, &children) != 0)
return (NULL);
for (c = 0; c < children; c++) {
Remove FRU and LIBTOPO Support FRU and LIBTOPO support are illumos only features that will not be ported to Linux and make the code more complicated than necessary. This commit makes way for further cleanups of the zed/FMA code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: David Quigley <david.quigley@intel.com> Closes #6641
2017-09-19 00:06:40 +00:00
if ((ret = find_vdev(zhdl, child[c], search_guid)) != NULL)
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
return (ret);
}
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
if (nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_SPARES,
&child, &children) != 0)
return (NULL);
for (c = 0; c < children; c++) {
if ((ret = find_vdev(zhdl, child[c], search_guid)) != NULL)
return (ret);
}
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
return (NULL);
}
/*
* Given a (pool, vdev) GUID pair, find the matching pool and vdev.
*/
static zpool_handle_t *
find_by_guid(libzfs_handle_t *zhdl, uint64_t pool_guid, uint64_t vdev_guid,
nvlist_t **vdevp)
{
find_cbdata_t cb;
zpool_handle_t *zhp;
nvlist_t *config, *nvroot;
/*
* Find the corresponding pool and make sure the vdev still exists.
*/
cb.cb_guid = pool_guid;
if (zpool_iter(zhdl, find_pool, &cb) != 1)
return (NULL);
zhp = cb.cb_zhp;
config = zpool_get_config(zhp, NULL);
if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
&nvroot) != 0) {
zpool_close(zhp);
return (NULL);
}
if (vdev_guid != 0) {
Remove FRU and LIBTOPO Support FRU and LIBTOPO support are illumos only features that will not be ported to Linux and make the code more complicated than necessary. This commit makes way for further cleanups of the zed/FMA code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: David Quigley <david.quigley@intel.com> Closes #6641
2017-09-19 00:06:40 +00:00
if ((*vdevp = find_vdev(zhdl, nvroot, vdev_guid)) == NULL) {
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
zpool_close(zhp);
return (NULL);
}
}
return (zhp);
}
/*
* Given a vdev, attempt to replace it with every known spare until one
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
* succeeds or we run out of devices to try.
* Return whether we were successful or not in replacing the device.
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
*/
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
static boolean_t
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
replace_with_spare(fmd_hdl_t *hdl, zpool_handle_t *zhp, nvlist_t *vdev)
{
nvlist_t *config, *nvroot, *replacement;
nvlist_t **spares;
uint_t s, nspares;
char *dev_name;
Various ZED fixes * Teach ZED to handle spares usingi the configured ashift: if the zpool 'ashift' property is set then ZED should use its value when kicking in a hotspare; with this change 512e disks can be used as spares for VDEVs that were created with ashift=9, even if ZFS natively detects them as 4K block devices. * Introduce an additional auto_spare test case which verifies that in the face of multiple device failures an appropiate number of spares are kicked in. * Fix zed_stop() in "libtest.shlib" which did not correctly wait the target pid. * Fix ZED crashing on startup caused by a race condition in libzfs when used in multi-threaded context. * Convert ZED over to using the tpool library which is already present in the Illumos FMA code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #2562 Closes #6858
2017-12-09 00:58:41 +00:00
zprop_source_t source;
int ashift;
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
config = zpool_get_config(zhp, NULL);
if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
&nvroot) != 0)
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
return (B_FALSE);
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
/*
* Find out if there are any hot spares available in the pool.
*/
if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES,
&spares, &nspares) != 0)
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
return (B_FALSE);
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
Various ZED fixes * Teach ZED to handle spares usingi the configured ashift: if the zpool 'ashift' property is set then ZED should use its value when kicking in a hotspare; with this change 512e disks can be used as spares for VDEVs that were created with ashift=9, even if ZFS natively detects them as 4K block devices. * Introduce an additional auto_spare test case which verifies that in the face of multiple device failures an appropiate number of spares are kicked in. * Fix zed_stop() in "libtest.shlib" which did not correctly wait the target pid. * Fix ZED crashing on startup caused by a race condition in libzfs when used in multi-threaded context. * Convert ZED over to using the tpool library which is already present in the Illumos FMA code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #2562 Closes #6858
2017-12-09 00:58:41 +00:00
/*
* lookup "ashift" pool property, we may need it for the replacement
*/
ashift = zpool_get_prop_int(zhp, ZPOOL_PROP_ASHIFT, &source);
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
replacement = fmd_nvl_alloc(hdl, FMD_SLEEP);
(void) nvlist_add_string(replacement, ZPOOL_CONFIG_TYPE,
VDEV_TYPE_ROOT);
dev_name = zpool_vdev_name(NULL, zhp, vdev, B_FALSE);
/*
* Try to replace each spare, ending when we successfully
* replace it.
*/
for (s = 0; s < nspares; s++) {
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-13 21:51:51 +00:00
boolean_t rebuild = B_FALSE;
char *spare_name, *type;
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
if (nvlist_lookup_string(spares[s], ZPOOL_CONFIG_PATH,
&spare_name) != 0)
continue;
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-13 21:51:51 +00:00
/* prefer sequential resilvering for distributed spares */
if ((nvlist_lookup_string(spares[s], ZPOOL_CONFIG_TYPE,
&type) == 0) && strcmp(type, VDEV_TYPE_DRAID_SPARE) == 0)
rebuild = B_TRUE;
Various ZED fixes * Teach ZED to handle spares usingi the configured ashift: if the zpool 'ashift' property is set then ZED should use its value when kicking in a hotspare; with this change 512e disks can be used as spares for VDEVs that were created with ashift=9, even if ZFS natively detects them as 4K block devices. * Introduce an additional auto_spare test case which verifies that in the face of multiple device failures an appropiate number of spares are kicked in. * Fix zed_stop() in "libtest.shlib" which did not correctly wait the target pid. * Fix ZED crashing on startup caused by a race condition in libzfs when used in multi-threaded context. * Convert ZED over to using the tpool library which is already present in the Illumos FMA code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #2562 Closes #6858
2017-12-09 00:58:41 +00:00
/* if set, add the "ashift" pool property to the spare nvlist */
if (source != ZPROP_SRC_DEFAULT)
(void) nvlist_add_uint64(spares[s],
ZPOOL_CONFIG_ASHIFT, ashift);
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
(void) nvlist_add_nvlist_array(replacement,
ZPOOL_CONFIG_CHILDREN, &spares[s], 1);
fmd_hdl_debug(hdl, "zpool_vdev_replace '%s' with spare '%s'",
Forbid basename(3) and dirname(3) There are at least two interpretations of basename(3), in addition to both functions being allowed to /both/ return a static buffer (unsuitable in multi-threaded environments) /and/ raze the input (which encourages overallocations, at best) Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #12105
2021-05-22 15:19:14 +00:00
dev_name, zfs_basename(spare_name));
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
if (zpool_vdev_attach(zhp, dev_name, spare_name,
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-13 21:51:51 +00:00
replacement, B_TRUE, rebuild) == 0) {
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
free(dev_name);
nvlist_free(replacement);
return (B_TRUE);
}
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
}
free(dev_name);
nvlist_free(replacement);
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
return (B_FALSE);
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
}
/*
* Repair this vdev if we had diagnosed a 'fault.fs.zfs.device' and
* ASRU is now usable. ZFS has found the device to be present and
* functioning.
*/
/*ARGSUSED*/
static void
zfs_vdev_repair(fmd_hdl_t *hdl, nvlist_t *nvl)
{
zfs_retire_data_t *zdp = fmd_hdl_getspecific(hdl);
zfs_retire_repaired_t *zrp;
uint64_t pool_guid, vdev_guid;
if (nvlist_lookup_uint64(nvl, FM_EREPORT_PAYLOAD_ZFS_POOL_GUID,
&pool_guid) != 0 || nvlist_lookup_uint64(nvl,
FM_EREPORT_PAYLOAD_ZFS_VDEV_GUID, &vdev_guid) != 0)
return;
/*
* Before checking the state of the ASRU, go through and see if we've
* already made an attempt to repair this ASRU. This list is cleared
* whenever we receive any kind of list event, and is designed to
* prevent us from generating a feedback loop when we attempt repairs
* against a faulted pool. The problem is that checking the unusable
* state of the ASRU can involve opening the pool, which can post
* statechange events but otherwise leave the pool in the faulted
* state. This list allows us to detect when a statechange event is
* due to our own request.
*/
for (zrp = zdp->zrd_repaired; zrp != NULL; zrp = zrp->zrr_next) {
if (zrp->zrr_pool == pool_guid &&
zrp->zrr_vdev == vdev_guid)
return;
}
zrp = fmd_hdl_alloc(hdl, sizeof (zfs_retire_repaired_t), FMD_SLEEP);
zrp->zrr_next = zdp->zrd_repaired;
zrp->zrr_pool = pool_guid;
zrp->zrr_vdev = vdev_guid;
zdp->zrd_repaired = zrp;
fmd_hdl_debug(hdl, "marking repaired vdev %llu on pool %llu",
vdev_guid, pool_guid);
}
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
/*ARGSUSED*/
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
static void
zfs_retire_recv(fmd_hdl_t *hdl, fmd_event_t *ep, nvlist_t *nvl,
const char *class)
{
uint64_t pool_guid, vdev_guid;
zpool_handle_t *zhp;
nvlist_t *resource, *fault;
nvlist_t **faults;
uint_t f, nfaults;
zfs_retire_data_t *zdp = fmd_hdl_getspecific(hdl);
libzfs_handle_t *zhdl = zdp->zrd_hdl;
boolean_t fault_device, degrade_device;
boolean_t is_repair;
char *scheme;
nvlist_t *vdev = NULL;
char *uuid;
int repair_done = 0;
boolean_t retire;
boolean_t is_disk;
vdev_aux_t aux;
uint64_t state = 0;
fmd_hdl_debug(hdl, "zfs_retire_recv: '%s'", class);
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 18:05:50 +00:00
nvlist_lookup_uint64(nvl, FM_EREPORT_PAYLOAD_ZFS_VDEV_STATE, &state);
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
/*
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
* If this is a resource notifying us of device removal then simply
* check for an available spare and continue unless the device is a
* l2arc vdev, in which case we just offline it.
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
*/
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 18:05:50 +00:00
if (strcmp(class, "resource.fs.zfs.removed") == 0 ||
(strcmp(class, "resource.fs.zfs.statechange") == 0 &&
Added extra check to replace Faulted VDEV with Distributed Spare In ZED zfs_retire agent added a check to handle Distributed Spare replacement for Faulted VDEV also. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Vipin Kumar Verma <vipin.verma@hpe.com> Signed-off-by: Mark Maybee <mark.maybee@hpe.com> Closes #11354 Closes #11355
2021-01-29 01:00:26 +00:00
(state == VDEV_STATE_REMOVED || state == VDEV_STATE_FAULTED))) {
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
char *devtype;
char *devname;
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
if (nvlist_lookup_uint64(nvl, FM_EREPORT_PAYLOAD_ZFS_POOL_GUID,
&pool_guid) != 0 ||
nvlist_lookup_uint64(nvl, FM_EREPORT_PAYLOAD_ZFS_VDEV_GUID,
&vdev_guid) != 0)
return;
if ((zhp = find_by_guid(zhdl, pool_guid, vdev_guid,
&vdev)) == NULL)
return;
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
devname = zpool_vdev_name(NULL, zhp, vdev, B_FALSE);
/* Can't replace l2arc with a spare: offline the device */
if (nvlist_lookup_string(nvl, FM_EREPORT_PAYLOAD_ZFS_VDEV_TYPE,
&devtype) == 0 && strcmp(devtype, VDEV_TYPE_L2CACHE) == 0) {
fmd_hdl_debug(hdl, "zpool_vdev_offline '%s'", devname);
zpool_vdev_offline(zhp, devname, B_TRUE);
} else if (!fmd_prop_get_int32(hdl, "spare_on_remove") ||
replace_with_spare(hdl, zhp, vdev) == B_FALSE) {
ZED: Do not offline a missing device if no spare is available Due to commit d48091d a removed device is now explicitly offlined by the ZED if no spare is available, rather than the letting ZFS detect it as UNAVAIL. This broke auto-replacing of whole-disk devices, as described in issue #10577. In short, when a new device is reinserted in the same slot, the ZED will try to ONLINE it without letting ZFS recreate the necessary partition table. This change simply avoids setting the device OFFLINE when removed if no spare is available (or if spare_on_remove is false). This change has been left minimal to allow it to be backported to 0.8.x release. The auto_offline_001_pos ZTS test has been updated accordingly. Some follow up work is planned to update the ZED so it transitions the vdev to a REMOVED state. This is a state which has always existed but there is no current interface the ZED can use to accomplish this. Therefore it's being left to a follow up PR. Reviewed-by: Gionatan Danti <g.danti@assyoma.it> Co-authored-by: Gionatan Danti <g.danti@assyoma.it> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10577 Closes #10730
2020-08-19 05:13:17 +00:00
/* Could not handle with spare */
fmd_hdl_debug(hdl, "no spare for '%s'", devname);
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
}
free(devname);
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
zpool_close(zhp);
return;
}
if (strcmp(class, FM_LIST_RESOLVED_CLASS) == 0)
return;
/*
Replace ZFS on Linux references with OpenZFS This change updates the documentation to refer to the project as OpenZFS instead ZFS on Linux. Web links have been updated to refer to https://github.com/openzfs/zfs. The extraneous zfsonlinux.org web links in the ZED and SPL sources have been dropped. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #11007
2020-10-09 03:10:13 +00:00
* Note: on Linux statechange events are more than just
Use cstyle -cpP in `make cstyle` check Enable picky cstyle checks and resolve the new warnings. The vast majority of the changes needed were to handle minor issues with whitespace formatting. This patch contains no functional changes. Non-whitespace changes are as follows: * 8 times ; to { } in for/while loop * fix missing ; in cmd/zed/agents/zfs_diagnosis.c * comment (confim -> confirm) * change endline , to ; in cmd/zpool/zpool_main.c * a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks * /* CSTYLED */ markers * change == 0 to ! * ulong to unsigned long in module/zfs/dsl_scan.c * rearrangement of module_param lines in module/zfs/metaslab.c * add { } block around statement after for_each_online_node Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Håkan Johansson <f96hajo@chalmers.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5465
2016-12-12 18:46:26 +00:00
* healthy ones so we need to confirm the actual state value.
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
*/
if (strcmp(class, "resource.fs.zfs.statechange") == 0 &&
Add device rebuild feature The device_rebuild feature enables sequential reconstruction when resilvering. Mirror vdevs can be rebuilt in LBA order which may more quickly restore redundancy depending on the pools average block size, overall fragmentation and the performance characteristics of the devices. However, block checksums cannot be verified as part of the rebuild thus a scrub is automatically started after the sequential resilver completes. The new '-s' option has been added to the `zpool attach` and `zpool replace` command to request sequential reconstruction instead of healing reconstruction when resilvering. zpool attach -s <pool> <existing vdev> <new vdev> zpool replace -s <pool> <old vdev> <new vdev> The `zpool status` output has been updated to report the progress of sequential resilvering in the same way as healing resilvering. The one notable difference is that multiple sequential resilvers may be in progress as long as they're operating on different top-level vdevs. The `zpool wait -t resilver` command was extended to wait on sequential resilvers. From this perspective they are no different than healing resilvers. Sequential resilvers cannot be supported for RAIDZ, but are compatible with the dRAID feature being developed. As part of this change the resilver_restart_* tests were moved in to the functional/replacement directory. Additionally, the replacement tests were renamed and extended to verify both resilvering and rebuilding. Original-patch-by: Isaac Huang <he.huang@intel.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: John Poduska <jpoduska@datto.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10349
2020-07-03 18:05:50 +00:00
state == VDEV_STATE_HEALTHY) {
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
zfs_vdev_repair(hdl, nvl);
return;
}
if (strcmp(class, "sysevent.fs.zfs.vdev_remove") == 0) {
zfs_vdev_repair(hdl, nvl);
return;
}
zfs_retire_clear_data(hdl, zdp);
if (strcmp(class, FM_LIST_REPAIRED_CLASS) == 0)
is_repair = B_TRUE;
else
is_repair = B_FALSE;
/*
* We subscribe to zfs faults as well as all repair events.
*/
if (nvlist_lookup_nvlist_array(nvl, FM_SUSPECT_FAULT_LIST,
&faults, &nfaults) != 0)
return;
for (f = 0; f < nfaults; f++) {
fault = faults[f];
fault_device = B_FALSE;
degrade_device = B_FALSE;
is_disk = B_FALSE;
if (nvlist_lookup_boolean_value(fault, FM_SUSPECT_RETIRE,
&retire) == 0 && retire == 0)
continue;
/*
* While we subscribe to fault.fs.zfs.*, we only take action
* for faults targeting a specific vdev (open failure or SERD
* failure). We also subscribe to fault.io.* events, so that
* faulty disks will be faulted in the ZFS configuration.
*/
if (fmd_nvl_class_match(hdl, fault, "fault.fs.zfs.vdev.io")) {
fault_device = B_TRUE;
} else if (fmd_nvl_class_match(hdl, fault,
"fault.fs.zfs.vdev.checksum")) {
degrade_device = B_TRUE;
} else if (fmd_nvl_class_match(hdl, fault,
"fault.fs.zfs.device")) {
fault_device = B_FALSE;
} else if (fmd_nvl_class_match(hdl, fault, "fault.io.*")) {
is_disk = B_TRUE;
fault_device = B_TRUE;
} else {
continue;
}
if (is_disk) {
continue;
} else {
/*
* This is a ZFS fault. Lookup the resource, and
* attempt to find the matching vdev.
*/
if (nvlist_lookup_nvlist(fault, FM_FAULT_RESOURCE,
&resource) != 0 ||
nvlist_lookup_string(resource, FM_FMRI_SCHEME,
&scheme) != 0)
continue;
if (strcmp(scheme, FM_FMRI_SCHEME_ZFS) != 0)
continue;
if (nvlist_lookup_uint64(resource, FM_FMRI_ZFS_POOL,
&pool_guid) != 0)
continue;
if (nvlist_lookup_uint64(resource, FM_FMRI_ZFS_VDEV,
&vdev_guid) != 0) {
if (is_repair)
vdev_guid = 0;
else
continue;
}
if ((zhp = find_by_guid(zhdl, pool_guid, vdev_guid,
&vdev)) == NULL)
continue;
aux = VDEV_AUX_ERR_EXCEEDED;
}
if (vdev_guid == 0) {
/*
* For pool-level repair events, clear the entire pool.
*/
fmd_hdl_debug(hdl, "zpool_clear of pool '%s'",
zpool_get_name(zhp));
(void) zpool_clear(zhp, NULL, NULL);
zpool_close(zhp);
continue;
}
/*
* If this is a repair event, then mark the vdev as repaired and
* continue.
*/
if (is_repair) {
repair_done = 1;
fmd_hdl_debug(hdl, "zpool_clear of pool '%s' vdev %llu",
zpool_get_name(zhp), vdev_guid);
(void) zpool_vdev_clear(zhp, vdev_guid);
zpool_close(zhp);
continue;
}
/*
* Actively fault the device if needed.
*/
if (fault_device)
(void) zpool_vdev_fault(zhp, vdev_guid, aux);
if (degrade_device)
(void) zpool_vdev_degrade(zhp, vdev_guid, aux);
if (fault_device || degrade_device)
fmd_hdl_debug(hdl, "zpool_vdev_%s: vdev %llu on '%s'",
fault_device ? "fault" : "degrade", vdev_guid,
zpool_get_name(zhp));
/*
* Attempt to substitute a hot spare.
*/
zed: detect and offline physically removed devices This commit adds a new test case to the ZFS Test Suite to verify ZED can detect when a device is physically removed from a running system: the device will be offlined if a spare is not available in the pool. We implement this by using the existing libudev functionality and without relying solely on the FM kernel module capabilities which have been observed to be unreliable with some kernels. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Don Brady <don.brady@delphix.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #1537 Closes #7926
2018-09-18 21:45:52 +00:00
(void) replace_with_spare(hdl, zhp, vdev);
Distributed Spare (dRAID) Feature This patch adds a new top-level vdev type called dRAID, which stands for Distributed parity RAID. This pool configuration allows all dRAID vdevs to participate when rebuilding to a distributed hot spare device. This can substantially reduce the total time required to restore full parity to pool with a failed device. A dRAID pool can be created using the new top-level `draid` type. Like `raidz`, the desired redundancy is specified after the type: `draid[1,2,3]`. No additional information is required to create the pool and reasonable default values will be chosen based on the number of child vdevs in the dRAID vdev. zpool create <pool> draid[1,2,3] <vdevs...> Unlike raidz, additional optional dRAID configuration values can be provided as part of the draid type as colon separated values. This allows administrators to fully specify a layout for either performance or capacity reasons. The supported options include: zpool create <pool> \ draid[<parity>][:<data>d][:<children>c][:<spares>s] \ <vdevs...> - draid[parity] - Parity level (default 1) - draid[:<data>d] - Data devices per group (default 8) - draid[:<children>c] - Expected number of child vdevs - draid[:<spares>s] - Distributed hot spares (default 0) Abbreviated example `zpool status` output for a 68 disk dRAID pool with two distributed spares using special allocation classes. ``` pool: tank state: ONLINE config: NAME STATE READ WRITE CKSUM slag7 ONLINE 0 0 0 draid2:8d:68c:2s-0 ONLINE 0 0 0 L0 ONLINE 0 0 0 L1 ONLINE 0 0 0 ... U25 ONLINE 0 0 0 U26 ONLINE 0 0 0 spare-53 ONLINE 0 0 0 U27 ONLINE 0 0 0 draid2-0-0 ONLINE 0 0 0 U28 ONLINE 0 0 0 U29 ONLINE 0 0 0 ... U42 ONLINE 0 0 0 U43 ONLINE 0 0 0 special mirror-1 ONLINE 0 0 0 L5 ONLINE 0 0 0 U5 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 L6 ONLINE 0 0 0 U6 ONLINE 0 0 0 spares draid2-0-0 INUSE currently in use draid2-0-1 AVAIL ``` When adding test coverage for the new dRAID vdev type the following options were added to the ztest command. These options are leverages by zloop.sh to test a wide range of dRAID configurations. -K draid|raidz|random - kind of RAID to test -D <value> - dRAID data drives per group -S <value> - dRAID distributed hot spares -R <value> - RAID parity (raidz or dRAID) The zpool_create, zpool_import, redundancy, replacement and fault test groups have all been updated provide test coverage for the dRAID feature. Co-authored-by: Isaac Huang <he.huang@intel.com> Co-authored-by: Mark Maybee <mmaybee@cray.com> Co-authored-by: Don Brady <don.brady@delphix.com> Co-authored-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mmaybee@cray.com> Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #10102
2020-11-13 21:51:51 +00:00
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
zpool_close(zhp);
}
if (strcmp(class, FM_LIST_REPAIRED_CLASS) == 0 && repair_done &&
nvlist_lookup_string(nvl, FM_SUSPECT_UUID, &uuid) == 0)
fmd_case_uuresolved(hdl, uuid);
}
static const fmd_hdl_ops_t fmd_ops = {
zfs_retire_recv, /* fmdo_recv */
NULL, /* fmdo_timeout */
NULL, /* fmdo_close */
NULL, /* fmdo_stats */
NULL, /* fmdo_gc */
};
static const fmd_prop_t fmd_props[] = {
{ "spare_on_remove", FMD_TYPE_BOOL, "true" },
{ NULL, 0, NULL }
};
static const fmd_hdl_info_t fmd_info = {
"ZFS Retire Agent", "1.0", &fmd_ops, fmd_props
};
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
void
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
_zfs_retire_init(fmd_hdl_t *hdl)
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
{
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
zfs_retire_data_t *zdp;
libzfs_handle_t *zhdl;
Various ZED fixes * Teach ZED to handle spares usingi the configured ashift: if the zpool 'ashift' property is set then ZED should use its value when kicking in a hotspare; with this change 512e disks can be used as spares for VDEVs that were created with ashift=9, even if ZFS natively detects them as 4K block devices. * Introduce an additional auto_spare test case which verifies that in the face of multiple device failures an appropiate number of spares are kicked in. * Fix zed_stop() in "libtest.shlib" which did not correctly wait the target pid. * Fix ZED crashing on startup caused by a race condition in libzfs when used in multi-threaded context. * Convert ZED over to using the tpool library which is already present in the Illumos FMA code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #2562 Closes #6858
2017-12-09 00:58:41 +00:00
if ((zhdl = libzfs_init()) == NULL)
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
return;
if (fmd_hdl_register(hdl, FMD_API_VERSION, &fmd_info) != 0) {
libzfs_fini(zhdl);
return;
}
zdp = fmd_hdl_zalloc(hdl, sizeof (zfs_retire_data_t), FMD_SLEEP);
zdp->zrd_hdl = zhdl;
fmd_hdl_setspecific(hdl, zdp);
}
void
_zfs_retire_fini(fmd_hdl_t *hdl)
{
zfs_retire_data_t *zdp = fmd_hdl_getspecific(hdl);
if (zdp != NULL) {
zfs_retire_clear_data(hdl, zdp);
Various ZED fixes * Teach ZED to handle spares usingi the configured ashift: if the zpool 'ashift' property is set then ZED should use its value when kicking in a hotspare; with this change 512e disks can be used as spares for VDEVs that were created with ashift=9, even if ZFS natively detects them as 4K block devices. * Introduce an additional auto_spare test case which verifies that in the face of multiple device failures an appropiate number of spares are kicked in. * Fix zed_stop() in "libtest.shlib" which did not correctly wait the target pid. * Fix ZED crashing on startup caused by a race condition in libzfs when used in multi-threaded context. * Convert ZED over to using the tpool library which is already present in the Illumos FMA code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com> Closes #2562 Closes #6858
2017-12-09 00:58:41 +00:00
libzfs_fini(zdp->zrd_hdl);
Add illumos FMD ZFS logic to ZED -- phase 2 The phase 2 work primarily entails the Diagnosis Engine and the Retire Agent modules. It also includes infrastructure to support a crude FMD environment to host these modules. The Diagnosis Engine consumes I/O and checksum ereports and feeds them into a SERD engine which will generate a corres- ponding fault diagnosis when the SERD engine fires. All the diagnosis state data is collected into cases, one case per vdev being tracked. The Retire Agent responds to diagnosed faults by isolating the faulty VDEV. It will notify the ZFS kernel module of the new VDEV state (degraded or faulted). This agent is also responsible for managing hot spares across pools. When it encounters a device fault or a device removal it replaces the device with an appropriate spare if available. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Closes #5343
2016-11-07 23:01:38 +00:00
fmd_hdl_free(hdl, zdp, sizeof (zfs_retire_data_t));
}
Bring over illumos ZFS FMA logic -- phase 1 This first phase brings over the ZFS SLM module, zfs_mod.c, to handle auto operations in response to disk events. Disk event monitoring is provided from libudev and generates the expected payload schema for zfs_mod. This work leverages the recently added devid and phys_path strings in the vdev label. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #4673
2016-08-31 21:46:58 +00:00
}