zfs/module/zcommon/zpool_prop.c

261 lines
7.8 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright 2011 Nexenta Systems, Inc. All rights reserved.
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* Copyright (c) 2012, 2014 by Delphix. All rights reserved.
2008-11-20 20:01:55 +00:00
*/
#include <sys/zio.h>
#include <sys/spa.h>
#include <sys/zfs_acl.h>
#include <sys/zfs_ioctl.h>
#include <sys/fs/zfs.h>
#include "zfs_prop.h"
#if defined(_KERNEL)
#include <sys/systm.h>
#else
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#endif
static zprop_desc_t zpool_prop_table[ZPOOL_NUM_PROPS];
zprop_desc_t *
zpool_prop_get_table(void)
{
return (zpool_prop_table);
}
void
zpool_prop_init(void)
{
static zprop_index_t boolean_table[] = {
{ "off", 0},
{ "on", 1},
{ NULL }
};
static zprop_index_t failuremode_table[] = {
{ "wait", ZIO_FAILURE_MODE_WAIT },
{ "continue", ZIO_FAILURE_MODE_CONTINUE },
{ "panic", ZIO_FAILURE_MODE_PANIC },
{ NULL }
};
/* string properties */
zprop_register_string(ZPOOL_PROP_ALTROOT, "altroot", NULL, PROP_DEFAULT,
2008-11-20 20:01:55 +00:00
ZFS_TYPE_POOL, "<path>", "ALTROOT");
zprop_register_string(ZPOOL_PROP_BOOTFS, "bootfs", NULL, PROP_DEFAULT,
2008-11-20 20:01:55 +00:00
ZFS_TYPE_POOL, "<filesystem>", "BOOTFS");
zprop_register_string(ZPOOL_PROP_CACHEFILE, "cachefile", NULL,
PROP_DEFAULT, ZFS_TYPE_POOL, "<file> | none", "CACHEFILE");
zprop_register_string(ZPOOL_PROP_COMMENT, "comment", NULL,
PROP_DEFAULT, ZFS_TYPE_POOL, "<comment-string>", "COMMENT");
2008-11-20 20:01:55 +00:00
/* readonly number properties */
zprop_register_number(ZPOOL_PROP_SIZE, "size", 0, PROP_READONLY,
2008-11-20 20:01:55 +00:00
ZFS_TYPE_POOL, "<size>", "SIZE");
zprop_register_number(ZPOOL_PROP_FREE, "free", 0, PROP_READONLY,
ZFS_TYPE_POOL, "<size>", "FREE");
zprop_register_number(ZPOOL_PROP_FREEING, "freeing", 0, PROP_READONLY,
ZFS_TYPE_POOL, "<size>", "FREEING");
zprop_register_number(ZPOOL_PROP_LEAKED, "leaked", 0, PROP_READONLY,
ZFS_TYPE_POOL, "<size>", "LEAKED");
zprop_register_number(ZPOOL_PROP_ALLOCATED, "allocated", 0,
PROP_READONLY, ZFS_TYPE_POOL, "<size>", "ALLOC");
zprop_register_number(ZPOOL_PROP_EXPANDSZ, "expandsize", 0,
PROP_READONLY, ZFS_TYPE_POOL, "<size>", "EXPANDSZ");
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
zprop_register_number(ZPOOL_PROP_FRAGMENTATION, "fragmentation", 0,
PROP_READONLY, ZFS_TYPE_POOL, "<percent>", "FRAG");
zprop_register_number(ZPOOL_PROP_CAPACITY, "capacity", 0, PROP_READONLY,
2008-11-20 20:01:55 +00:00
ZFS_TYPE_POOL, "<size>", "CAP");
zprop_register_number(ZPOOL_PROP_GUID, "guid", 0, PROP_READONLY,
2008-11-20 20:01:55 +00:00
ZFS_TYPE_POOL, "<guid>", "GUID");
zprop_register_number(ZPOOL_PROP_HEALTH, "health", 0, PROP_READONLY,
2008-11-20 20:01:55 +00:00
ZFS_TYPE_POOL, "<state>", "HEALTH");
zprop_register_number(ZPOOL_PROP_DEDUPRATIO, "dedupratio", 0,
PROP_READONLY, ZFS_TYPE_POOL, "<1.00x or higher if deduped>",
"DEDUP");
2008-11-20 20:01:55 +00:00
/* readonly onetime number properties */
zprop_register_number(ZPOOL_PROP_ASHIFT, "ashift", 0, PROP_ONETIME,
ZFS_TYPE_POOL, "<ashift, 9-13, or 0=default>", "ASHIFT");
2008-11-20 20:01:55 +00:00
/* default number properties */
zprop_register_number(ZPOOL_PROP_VERSION, "version", SPA_VERSION,
2008-11-20 20:01:55 +00:00
PROP_DEFAULT, ZFS_TYPE_POOL, "<version>", "VERSION");
zprop_register_number(ZPOOL_PROP_DEDUPDITTO, "dedupditto", 0,
PROP_DEFAULT, ZFS_TYPE_POOL, "<threshold (min 100)>", "DEDUPDITTO");
2008-11-20 20:01:55 +00:00
/* default index (boolean) properties */
zprop_register_index(ZPOOL_PROP_DELEGATION, "delegation", 1,
PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "DELEGATION",
boolean_table);
zprop_register_index(ZPOOL_PROP_AUTOREPLACE, "autoreplace", 0,
PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "REPLACE", boolean_table);
zprop_register_index(ZPOOL_PROP_LISTSNAPS, "listsnapshots", 0,
PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "LISTSNAPS",
boolean_table);
zprop_register_index(ZPOOL_PROP_AUTOEXPAND, "autoexpand", 0,
PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "EXPAND", boolean_table);
zprop_register_index(ZPOOL_PROP_READONLY, "readonly", 0,
PROP_DEFAULT, ZFS_TYPE_POOL, "on | off", "RDONLY", boolean_table);
2008-11-20 20:01:55 +00:00
/* default index properties */
zprop_register_index(ZPOOL_PROP_FAILUREMODE, "failmode",
2008-11-20 20:01:55 +00:00
ZIO_FAILURE_MODE_WAIT, PROP_DEFAULT, ZFS_TYPE_POOL,
"wait | continue | panic", "FAILMODE", failuremode_table);
/* hidden properties */
zprop_register_hidden(ZPOOL_PROP_NAME, "name", PROP_TYPE_STRING,
2008-11-20 20:01:55 +00:00
PROP_READONLY, ZFS_TYPE_POOL, "NAME");
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
zprop_register_hidden(ZPOOL_PROP_MAXBLOCKSIZE, "maxblocksize",
PROP_TYPE_NUMBER, PROP_READONLY, ZFS_TYPE_POOL, "MAXBLOCKSIZE");
zprop_register_hidden(ZPOOL_PROP_TNAME, "tname", PROP_TYPE_STRING,
PROP_ONETIME, ZFS_TYPE_POOL, "TNAME");
2008-11-20 20:01:55 +00:00
}
/*
* Given a property name and its type, returns the corresponding property ID.
*/
zpool_prop_t
zpool_name_to_prop(const char *propname)
{
return (zprop_name_to_prop(propname, ZFS_TYPE_POOL));
}
/*
* Given a pool property ID, returns the corresponding name.
* Assuming the pool propety ID is valid.
*/
const char *
zpool_prop_to_name(zpool_prop_t prop)
{
return (zpool_prop_table[prop].pd_name);
}
zprop_type_t
zpool_prop_get_type(zpool_prop_t prop)
{
return (zpool_prop_table[prop].pd_proptype);
}
boolean_t
zpool_prop_readonly(zpool_prop_t prop)
{
return (zpool_prop_table[prop].pd_attr == PROP_READONLY);
}
const char *
zpool_prop_default_string(zpool_prop_t prop)
{
return (zpool_prop_table[prop].pd_strdefault);
}
uint64_t
zpool_prop_default_numeric(zpool_prop_t prop)
{
return (zpool_prop_table[prop].pd_numdefault);
}
/*
* Returns true if this is a valid feature@ property.
*/
boolean_t
zpool_prop_feature(const char *name)
{
static const char *prefix = "feature@";
return (strncmp(name, prefix, strlen(prefix)) == 0);
}
/*
* Returns true if this is a valid unsupported@ property.
*/
boolean_t
zpool_prop_unsupported(const char *name)
{
static const char *prefix = "unsupported@";
return (strncmp(name, prefix, strlen(prefix)) == 0);
}
2008-11-20 20:01:55 +00:00
int
zpool_prop_string_to_index(zpool_prop_t prop, const char *string,
uint64_t *index)
{
return (zprop_string_to_index(prop, string, index, ZFS_TYPE_POOL));
}
int
zpool_prop_index_to_string(zpool_prop_t prop, uint64_t index,
const char **string)
{
return (zprop_index_to_string(prop, index, string, ZFS_TYPE_POOL));
}
uint64_t
zpool_prop_random_value(zpool_prop_t prop, uint64_t seed)
{
return (zprop_random_value(prop, seed, ZFS_TYPE_POOL));
}
2008-11-20 20:01:55 +00:00
#ifndef _KERNEL
const char *
zpool_prop_values(zpool_prop_t prop)
{
return (zpool_prop_table[prop].pd_values);
}
const char *
zpool_prop_column_name(zpool_prop_t prop)
{
return (zpool_prop_table[prop].pd_colname);
}
boolean_t
zpool_prop_align_right(zpool_prop_t prop)
{
return (zpool_prop_table[prop].pd_rightalign);
}
#endif
#if defined(_KERNEL) && defined(HAVE_SPL)
/* zpool property functions */
EXPORT_SYMBOL(zpool_prop_init);
EXPORT_SYMBOL(zpool_prop_get_type);
EXPORT_SYMBOL(zpool_prop_get_table);
/* Pool property functions shared between libzfs and kernel. */
EXPORT_SYMBOL(zpool_name_to_prop);
EXPORT_SYMBOL(zpool_prop_to_name);
EXPORT_SYMBOL(zpool_prop_default_string);
EXPORT_SYMBOL(zpool_prop_default_numeric);
EXPORT_SYMBOL(zpool_prop_readonly);
EXPORT_SYMBOL(zpool_prop_feature);
EXPORT_SYMBOL(zpool_prop_unsupported);
EXPORT_SYMBOL(zpool_prop_index_to_string);
EXPORT_SYMBOL(zpool_prop_string_to_index);
#endif