zfs/configure.ac

90 lines
2.4 KiB
Plaintext
Raw Normal View History

/*
* This file is part of OpenZFS.
*
* Copyright (c) 2009 Lawrence Livermore National Security, LLC.
* Produced at Lawrence Livermore National Laboratory
* Written by:
* Brian Behlendorf <behlendorf1@llnl.gov>,
* Herb Wartens <wartens2@llnl.gov>,
* Jim Garlick <garlick@llnl.gov>
* LLNL-CODE-403049
*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License, Version 1.0 only
* (the "License"). You may not use this file except in compliance
* with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
autoconf: use include directives instead of recursing down lib As a bonus, this also adds zfs-mount-generator (previously undescended down) and libzstd (not included) to CppCheck As a bonus bonus, abigail rules work out-of-tree, too Against current trunk: $ diff -U0 ./destdir.listing ~/store/code/zfs/destdir.listing -destdir/usr/local/include/libspl/sscanf.h $ diff --color -U0 ./zfs-2.1.99.tar.gz.listing ../oot/zfs-2.1.99.tar.gz.listing | grep -v @@ | grep -v /Makefile -zfs-2.1.99/config/Abigail.am -zfs-2.1.99/lib/libspl/include/util/ -zfs-2.1.99/lib/libspl/include/util/sscanf.h $ diff --color -U0 ./zfs-2.1.99.tar.gz.listing ../oot/zfs-2.1.99.tar.gz.listing | grep -v @@ | grep /Makefile -zfs-2.1.99/lib/libavl/Makefile.in -zfs-2.1.99/lib/libefi/Makefile.in -zfs-2.1.99/lib/libicp/Makefile.in -zfs-2.1.99/lib/libnvpair/Makefile.in -zfs-2.1.99/lib/libshare/Makefile.in -zfs-2.1.99/lib/libspl/include/Makefile.in -zfs-2.1.99/lib/libspl/include/os/freebsd/Makefile.am -zfs-2.1.99/lib/libspl/include/os/freebsd/Makefile.in -zfs-2.1.99/lib/libspl/include/os/freebsd/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/os/freebsd/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/os/linux/Makefile.am -zfs-2.1.99/lib/libspl/include/os/linux/Makefile.in -zfs-2.1.99/lib/libspl/include/os/linux/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/os/linux/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/os/Makefile.am -zfs-2.1.99/lib/libspl/include/os/Makefile.in -zfs-2.1.99/lib/libspl/include/rpc/Makefile.am -zfs-2.1.99/lib/libspl/include/rpc/Makefile.in -zfs-2.1.99/lib/libspl/include/sys/dktp/Makefile.am -zfs-2.1.99/lib/libspl/include/sys/dktp/Makefile.in -zfs-2.1.99/lib/libspl/include/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/util/Makefile.am -zfs-2.1.99/lib/libspl/include/util/Makefile.in -zfs-2.1.99/lib/libspl/Makefile.in -zfs-2.1.99/lib/libtpool/Makefile.in -zfs-2.1.99/lib/libunicode/Makefile.in -zfs-2.1.99/lib/libuutil/Makefile.in -zfs-2.1.99/lib/libzfsbootenv/Makefile.in -zfs-2.1.99/lib/libzfs_core/Makefile.in -zfs-2.1.99/lib/libzfs/Makefile.in -zfs-2.1.99/lib/libzpool/Makefile.in -zfs-2.1.99/lib/libzstd/Makefile.in -zfs-2.1.99/lib/libzutil/Makefile.in -zfs-2.1.99/lib/Makefile.in Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #13316
2022-04-07 23:07:08 +00:00
AC_INIT(m4_esyscmd(awk '/^Name:/ {printf $2}' META),
m4_esyscmd(awk '/^Version:/ {printf $2}' META))
CFGOPTS="$*"
AC_LANG(C)
ZFS_AC_META
AC_CONFIG_AUX_DIR([config])
AC_CONFIG_MACRO_DIR([config])
AC_CANONICAL_TARGET
AM_MAINTAINER_MODE
m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
autoconf: use include directives instead of recursing down lib As a bonus, this also adds zfs-mount-generator (previously undescended down) and libzstd (not included) to CppCheck As a bonus bonus, abigail rules work out-of-tree, too Against current trunk: $ diff -U0 ./destdir.listing ~/store/code/zfs/destdir.listing -destdir/usr/local/include/libspl/sscanf.h $ diff --color -U0 ./zfs-2.1.99.tar.gz.listing ../oot/zfs-2.1.99.tar.gz.listing | grep -v @@ | grep -v /Makefile -zfs-2.1.99/config/Abigail.am -zfs-2.1.99/lib/libspl/include/util/ -zfs-2.1.99/lib/libspl/include/util/sscanf.h $ diff --color -U0 ./zfs-2.1.99.tar.gz.listing ../oot/zfs-2.1.99.tar.gz.listing | grep -v @@ | grep /Makefile -zfs-2.1.99/lib/libavl/Makefile.in -zfs-2.1.99/lib/libefi/Makefile.in -zfs-2.1.99/lib/libicp/Makefile.in -zfs-2.1.99/lib/libnvpair/Makefile.in -zfs-2.1.99/lib/libshare/Makefile.in -zfs-2.1.99/lib/libspl/include/Makefile.in -zfs-2.1.99/lib/libspl/include/os/freebsd/Makefile.am -zfs-2.1.99/lib/libspl/include/os/freebsd/Makefile.in -zfs-2.1.99/lib/libspl/include/os/freebsd/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/os/freebsd/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/os/linux/Makefile.am -zfs-2.1.99/lib/libspl/include/os/linux/Makefile.in -zfs-2.1.99/lib/libspl/include/os/linux/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/os/linux/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/os/Makefile.am -zfs-2.1.99/lib/libspl/include/os/Makefile.in -zfs-2.1.99/lib/libspl/include/rpc/Makefile.am -zfs-2.1.99/lib/libspl/include/rpc/Makefile.in -zfs-2.1.99/lib/libspl/include/sys/dktp/Makefile.am -zfs-2.1.99/lib/libspl/include/sys/dktp/Makefile.in -zfs-2.1.99/lib/libspl/include/sys/Makefile.am -zfs-2.1.99/lib/libspl/include/sys/Makefile.in -zfs-2.1.99/lib/libspl/include/util/Makefile.am -zfs-2.1.99/lib/libspl/include/util/Makefile.in -zfs-2.1.99/lib/libspl/Makefile.in -zfs-2.1.99/lib/libtpool/Makefile.in -zfs-2.1.99/lib/libunicode/Makefile.in -zfs-2.1.99/lib/libuutil/Makefile.in -zfs-2.1.99/lib/libzfsbootenv/Makefile.in -zfs-2.1.99/lib/libzfs_core/Makefile.in -zfs-2.1.99/lib/libzfs/Makefile.in -zfs-2.1.99/lib/libzpool/Makefile.in -zfs-2.1.99/lib/libzstd/Makefile.in -zfs-2.1.99/lib/libzutil/Makefile.in -zfs-2.1.99/lib/Makefile.in Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #13316
2022-04-07 23:07:08 +00:00
AM_INIT_AUTOMAKE([subdir-objects foreign])
# Remove default macros from config.h:
# PACKAGE, PACKAGE_{BUGREPORT,NAME,STRING,TARNAME,VERSION}, STDC_HEADERS, VERSION
AC_CONFIG_HEADERS([zfs_config.h], [
$SED -nri~ -e '/^$/be' -e 'N;N;/#define (PACKAGE|VERSION|STDC_HEADERS)/d' -e ':e' -e 'p' zfs_config.h && rm zfs_config.h~ || exit])
LT_INIT
AC_PROG_INSTALL
AC_PROG_CC
AC_PROG_LN_S
config: better libtirpc detection Improve the autoconf code for finding libtirpc and do not assume the headers are in /usr/include/tirpc. Also remove this assumption from the `rpc/xdr.h` header in libspl and use the same `#include_next` mechanism that is used for other libspl headers. Include pkg.m4 from pkg-config in config/ for PKG_CHECK_MODULES(), the file license allows this. Include ax_save_flags.m4 and ax_restore_flags.m4 from autoconf-archive, the file licenses are compatible. Use the 2012 versions so as not rely on a more recent autoconf feature AS_VAR_COPY(), which breaks some build slaves. Add new macro library `config/find_system_library.m4` which defines the FIND_SYSTEM_LIBRARY() macro which is a convenience wrapper over using PKG_CHECK_MODULES() with a fallback to standard library locations and some sanity checks. The parameters are: ``` FIND_SYSTEM_LIBRARY(VARIABLE-PREFIX, MODULE, HEADER, HEADER-PREFIXES, LIBRARY, FUNCTIONS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) ``` `HEADER-PREFIXES` and `FUNCTIONS` are comma-separated m4 lists. For libtirpc we are using: ``` FIND_SYSTEM_LIBRARY(LIBTIRPC, [libtirpc], [rpc/xdr.h], [tirpc], [tirpc], [xdrmem_create], [], [...]) ``` The headers are first checked for without the prefixes and then with. This system works with pkg-config and falls back on checking standard header/library locations, it can be easily overridden by the user by setting the `PREFIX_CFLAGS` and `PREFIX_LIBS` variables which are automatically added to the `./configure --help` output. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rafael Kitover <rkitover@gmail.com> Closes #7422 Closes #8313
2019-03-03 00:19:05 +00:00
PKG_PROG_PKG_CONFIG
AM_PROG_AS
OpenZFS 4185 - add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-R Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com> Reviewed by: Richard Lowe <richlowe@richlowe.net> Approved by: Garrett D'Amore <garrett@damore.org> Ported by: Tony Hutter <hutter2@llnl.gov> OpenZFS-issue: https://www.illumos.org/issues/4185 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45818ee Porting Notes: This code is ported on top of the Illumos Crypto Framework code: https://github.com/zfsonlinux/zfs/pull/4329/commits/b5e030c8dbb9cd393d313571dee4756fbba8c22d The list of porting changes includes: - Copied module/icp/include/sha2/sha2.h directly from illumos - Removed from module/icp/algs/sha2/sha2.c: #pragma inline(SHA256Init, SHA384Init, SHA512Init) - Added 'ctx' to lib/libzfs/libzfs_sendrecv.c:zio_checksum_SHA256() since it now takes in an extra parameter. - Added CTASSERT() to assert.h from for module/zfs/edonr_zfs.c - Added skein & edonr to libicp/Makefile.am - Added sha512.S. It was generated from sha512-x86_64.pl in Illumos. - Updated ztest.c with new fletcher_4_*() args; used NULL for new CTX argument. - In icp/algs/edonr/edonr_byteorder.h, Removed the #if defined(__linux) section to not #include the non-existant endian.h. - In skein_test.c, renane NULL to 0 in "no test vector" array entries to get around a compiler warning. - Fixup test files: - Rename <sys/varargs.h> -> <varargs.h>, <strings.h> -> <string.h>, - Remove <note.h> and define NOTE() as NOP. - Define u_longlong_t - Rename "#!/usr/bin/ksh" -> "#!/bin/ksh -p" - Rename NULL to 0 in "no test vector" array entries to get around a compiler warning. - Remove "for isa in $($ISAINFO); do" stuff - Add/update Makefiles - Add some userspace headers like stdio.h/stdlib.h in places of sys/types.h. - EXPORT_SYMBOL *_Init/*_Update/*_Final... routines in ICP modules. - Update scripts/zfs2zol-patch.sed - include <sys/sha2.h> in sha2_impl.h - Add sha2.h to include/sys/Makefile.am - Add skein and edonr dirs to icp Makefile - Add new checksums to zpool_get.cfg - Move checksum switch block from zfs_secpolicy_setprop() to zfs_check_settable() - Fix -Wuninitialized error in edonr_byteorder.h on PPC - Fix stack frame size errors on ARM32 - Don't unroll loops in Skein on 32-bit to save stack space - Add memory barriers in sha2.c on 32-bit to save stack space - Add filetest_001_pos.ksh checksum sanity test - Add option to write psudorandom data in file_write utility
2016-06-15 22:47:05 +00:00
AM_PROG_CC_C_O
AX_CODE_COVERAGE
_AM_PROG_TAR(pax)
ZFS_AC_LICENSE
ZFS_AC_CONFIG
ZFS_AC_PACKAGE
ZFS_AC_DEBUG
Implement --enable-debuginfo to force debuginfo Inspection of a Ubuntu 14.04 x64 system revealed that the config file used to build the kernel image differs from the config file used to build kernel modules by the presence of CONFIG_DEBUG_INFO=y: This in itself is insufficient to show that the kernel is built with debuginfo, but a cursory analysis of the debuginfo provided and the size of the kernel strongly suggests that it was built with CONFIG_DEBUG_INFO=y while the modules were not. Installing linux-image-$(uname -r)-dbgsym had no obvious effect on the debuginfo provided by either the modules or the kernel. The consequence is that issue reports from distributions such as Ubuntu and its derivatives build kernel modules without debuginfo contain nonsensical backtraces. It is therefore desireable to force generation of debuginfo, so we implement --enable-debuginfo. Since the build system can build both userspace components and kernel modules, the generic --enable-debuginfo option will force debuginfo for both. However, it also supports --enable-debuginfo=kernel and --enable-debuginfo=user for finer grained control. Enabling debuginfo for the kernel modules works by injecting CONFIG_DEBUG_INFO=y into the make environment. This is enables generation of debuginfo by the kernel build systems on all Linux kernels, but the build environment is slightly different int hat CONFIG_DEBUG_INFO has not been in the CPP. Adding -DCONFIG_DEBUG_INFO would fix that, but it would also cause build failures on kernels where CONFIG_DEBUG_INFO=y is already set. That would complicate its use in DKMS environments that support a range of kernels and is therefore undesireable. We could write a compatibility shim to enable CONFIG_DEBUG_INFO only when it is explicitly disabled, but we forgo doing that because it is unnecessary. Nothing in ZoL or the kernel uses CONFIG_DEBUG_INFO in the CPP at this time and that is unlikely to change. Enabling debuginfo for the userspace components is done by injecting -g into CPPFLAGS. This is not necessary because the build system honors the environment's CPPFLAGS by appending them to the actual CPPFLAGS used, but it is supported for consistency. Reviewed-by: Chunwei Chen <tuxoko@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Richard Yao <richard.yao@clusterhq.com> Closes #2734
2014-09-23 18:29:30 +00:00
ZFS_AC_DEBUGINFO
Update build system and packaging Minimal changes required to integrate the SPL sources in to the ZFS repository build infrastructure and packaging. Build system and packaging: * Renamed SPL_* autoconf m4 macros to ZFS_*. * Removed redundant SPL_* autoconf m4 macros. * Updated the RPM spec files to remove SPL package dependency. * The zfs package obsoletes the spl package, and the zfs-kmod package obsoletes the spl-kmod package. * The zfs-kmod-devel* packages were updated to add compatibility symlinks under /usr/src/spl-x.y.z until all dependent packages can be updated. They will be removed in a future release. * Updated copy-builtin script for in-kernel builds. * Updated DKMS package to include the spl.ko. * Updated stale AUTHORS file to include all contributors. * Updated stale COPYRIGHT and included the SPL as an exception. * Renamed README.markdown to README.md * Renamed OPENSOLARIS.LICENSE to LICENSE. * Renamed DISCLAIMER to NOTICE. Required code changes: * Removed redundant HAVE_SPL macro. * Removed _BOOT from nvpairs since it doesn't apply for Linux. * Initial header cleanup (removal of empty headers, refactoring). * Remove SPL repository clone/build from zimport.sh. * Use of DEFINE_RATELIMIT_STATE and DEFINE_SPINLOCK removed due to build issues when forcing C99 compilation. * Replaced legacy ACCESS_ONCE with READ_ONCE. * Include needed headers for `current` and `EXPORT_SYMBOL`. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> TEST_ZIMPORT_SKIP="yes" Closes #7556
2018-02-16 01:53:18 +00:00
ZFS_AC_DEBUG_KMEM
ZFS_AC_DEBUG_KMEM_TRACKING
ZFS_AC_DEBUG_INVARIANTS
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
AC_CONFIG_FILES([
contrib/debian/rules
contrib/debian/changelog
Makefile
include/Makefile
lib/libzfs/libzfs.pc
lib/libzfs_core/libzfs_core.pc
lib/libzfsbootenv/libzfsbootenv.pc
Cleanup linux module kbuild files The linux module can be built either as an external module, or compiled into the kernel, using copy-builtin. The source and build directories are slightly different between the two cases, and currently, compiling into the kernel still refers to some files from the configured ZFS source tree, instead of the copies inside the kernel source tree. There is also duplication between copy-builtin, which creates a Kbuild file to build ZFS inside the kernel tree, and the top-level module/Makefile.in. Fix this by moving the list of modules and the CFLAGS settings into a new module/Kbuild.in, which will be used by the kernel kbuild infrastructure, and using KBUILD_EXTMOD to distinguish the two cases within the Makefiles, in order to choose appropriate include directories etc. Module CFLAGS setting is simplified by using subdir-ccflags-y (available since 2.6.30) to set them in the top-level Kbuild instead of each individual module. The disabling of -Wunused-but-set-variable is removed from the lua and zfs modules. The variable that the Makefile uses is actually not defined, so this has no effect; and the warning has long been disabled by the kernel Makefile itself. The target_cpu definition in module/{zfs,zcommon} is removed as it was replaced by use of CONFIG_SPARC64 in commit 70835c5b755e ("Unify target_cpu handling") os/linux/{spl,zfs} are removed from obj-m, as they are not modules in themselves, but are included by the Makefile in the spl and zfs module directories. The vestigial Makefiles in os and os/linux are removed. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Closes #10379 Closes #10421
2020-06-07 21:03:12 +00:00
module/Kbuild
module/Makefile
rpm/generic/zfs-dkms.spec
rpm/generic/zfs-kmod.spec
rpm/generic/zfs.spec
rpm/redhat/zfs-dkms.spec
rpm/redhat/zfs-kmod.spec
rpm/redhat/zfs.spec
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
tests/zfs-tests/tests/Makefile
zfs.release
])
AC_OUTPUT