zfs/lib/libzfs/libzfs_status.c

463 lines
12 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
2008-11-20 20:01:55 +00:00
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2012 by Delphix. All rights reserved.
* Copyright (c) 2013 Steven Hartland. All rights reserved.
2008-11-20 20:01:55 +00:00
*/
/*
* This file contains the functions which analyze the status of a pool. This
* include both the status of an active pool, as well as the status exported
* pools. Returns one of the ZPOOL_STATUS_* defines describing the status of
* the pool. This status is independent (to a certain degree) from the state of
* the pool. A pool's state describes only whether or not it is capable of
* providing the necessary fault tolerance for data. The status describes the
* overall status of devices. A pool that is online can still have a device
* that is experiencing errors.
*
* Only a subset of the possible faults can be detected using 'zpool status',
* and not all possible errors correspond to a FMA message ID. The explanation
* is left up to the caller, depending on whether it is a live pool or an
* import.
*/
#include <libzfs.h>
#include <string.h>
#include <unistd.h>
#include "libzfs_impl.h"
#include "zfeature_common.h"
2008-11-20 20:01:55 +00:00
/*
* Message ID table. This must be kept in sync with the ZPOOL_STATUS_* defines
* in libzfs.h. Note that there are some status results which go past the end
* of this table, and hence have no associated message ID.
*/
static char *zfs_msgid_table[] = {
"ZFS-8000-14",
"ZFS-8000-2Q",
"ZFS-8000-3C",
"ZFS-8000-4J",
"ZFS-8000-5E",
"ZFS-8000-6X",
"ZFS-8000-72",
"ZFS-8000-8A",
"ZFS-8000-9P",
"ZFS-8000-A5",
"ZFS-8000-EY",
"ZFS-8000-HC",
"ZFS-8000-JQ",
"ZFS-8000-K4",
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
"ZFS-8000-ER",
2008-11-20 20:01:55 +00:00
};
#define NMSGID (sizeof (zfs_msgid_table) / sizeof (zfs_msgid_table[0]))
/* ARGSUSED */
static int
vdev_missing(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_CANT_OPEN &&
aux == VDEV_AUX_OPEN_FAILED);
}
/* ARGSUSED */
static int
vdev_faulted(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_FAULTED);
}
/* ARGSUSED */
static int
vdev_errors(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_DEGRADED || errs != 0);
}
/* ARGSUSED */
static int
vdev_broken(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_CANT_OPEN);
}
/* ARGSUSED */
static int
vdev_offlined(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_OFFLINE);
}
2009-08-18 18:43:27 +00:00
/* ARGSUSED */
static int
vdev_removed(uint64_t state, uint64_t aux, uint64_t errs)
{
return (state == VDEV_STATE_REMOVED);
}
2008-11-20 20:01:55 +00:00
/*
* Detect if any leaf devices that have seen errors or could not be opened.
*/
static boolean_t
find_vdev_problem(nvlist_t *vdev, int (*func)(uint64_t, uint64_t, uint64_t))
{
nvlist_t **child;
vdev_stat_t *vs;
uint_t c, children;
char *type;
/*
* Ignore problems within a 'replacing' vdev, since we're presumably in
* the process of repairing any such errors, and don't want to call them
* out again. We'll pick up the fact that a resilver is happening
* later.
*/
verify(nvlist_lookup_string(vdev, ZPOOL_CONFIG_TYPE, &type) == 0);
if (strcmp(type, VDEV_TYPE_REPLACING) == 0)
return (B_FALSE);
if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_CHILDREN, &child,
&children) == 0) {
for (c = 0; c < children; c++)
if (find_vdev_problem(child[c], func))
return (B_TRUE);
} else {
verify(nvlist_lookup_uint64_array(vdev, ZPOOL_CONFIG_VDEV_STATS,
2008-11-20 20:01:55 +00:00
(uint64_t **)&vs, &c) == 0);
if (func(vs->vs_state, vs->vs_aux,
vs->vs_read_errors +
vs->vs_write_errors +
vs->vs_checksum_errors))
return (B_TRUE);
}
/*
* Check any L2 cache devs
*/
if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_L2CACHE, &child,
&children) == 0) {
for (c = 0; c < children; c++)
if (find_vdev_problem(child[c], func))
return (B_TRUE);
}
2008-11-20 20:01:55 +00:00
return (B_FALSE);
}
/*
* Active pool health status.
*
* To determine the status for a pool, we make several passes over the config,
* picking the most egregious error we find. In order of importance, we do the
* following:
*
* - Check for a complete and valid configuration
* - Look for any faulted or missing devices in a non-replicated config
* - Check for any data errors
* - Check for any faulted or missing devices in a replicated config
* - Look for any devices showing errors
* - Check for any resilvering devices
*
* There can obviously be multiple errors within a single pool, so this routine
* only picks the most damaging of all the current errors to report.
*/
static zpool_status_t
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
check_status(nvlist_t *config, boolean_t isimport, zpool_errata_t *erratap)
2008-11-20 20:01:55 +00:00
{
nvlist_t *nvroot;
vdev_stat_t *vs;
pool_scan_stat_t *ps = NULL;
uint_t vsc, psc;
2008-11-20 20:01:55 +00:00
uint64_t nerr;
uint64_t version;
uint64_t stateval;
uint64_t suspended;
2008-11-20 20:01:55 +00:00
uint64_t hostid = 0;
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
uint64_t errata = 0;
unsigned long system_hostid = get_system_hostid();
2008-11-20 20:01:55 +00:00
verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION,
&version) == 0);
verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
&nvroot) == 0);
verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_VDEV_STATS,
2008-11-20 20:01:55 +00:00
(uint64_t **)&vs, &vsc) == 0);
verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE,
&stateval) == 0);
/*
* Currently resilvering a vdev
*/
(void) nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_SCAN_STATS,
(uint64_t **)&ps, &psc);
if (ps && ps->pss_func == POOL_SCAN_RESILVER &&
ps->pss_state == DSS_SCANNING)
return (ZPOOL_STATUS_RESILVERING);
2008-11-20 20:01:55 +00:00
/*
* Pool last accessed by another system.
*/
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_HOSTID, &hostid);
if (hostid != 0 && (unsigned long)hostid != system_hostid &&
2008-11-20 20:01:55 +00:00
stateval == POOL_STATE_ACTIVE)
return (ZPOOL_STATUS_HOSTID_MISMATCH);
/*
* Newer on-disk version.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_VERSION_NEWER)
return (ZPOOL_STATUS_VERSION_NEWER);
/*
* Unsupported feature(s).
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_UNSUP_FEAT) {
nvlist_t *nvinfo;
verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO,
&nvinfo) == 0);
if (nvlist_exists(nvinfo, ZPOOL_CONFIG_CAN_RDONLY))
return (ZPOOL_STATUS_UNSUP_FEAT_WRITE);
return (ZPOOL_STATUS_UNSUP_FEAT_READ);
}
2008-11-20 20:01:55 +00:00
/*
* Check that the config is complete.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_BAD_GUID_SUM)
return (ZPOOL_STATUS_BAD_GUID_SUM);
/*
* Check whether the pool has suspended due to failed I/O.
*/
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_SUSPENDED,
&suspended) == 0) {
if (suspended == ZIO_FAILURE_MODE_CONTINUE)
return (ZPOOL_STATUS_IO_FAILURE_CONTINUE);
return (ZPOOL_STATUS_IO_FAILURE_WAIT);
}
/*
* Could not read a log.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_BAD_LOG) {
return (ZPOOL_STATUS_BAD_LOG);
}
2008-11-20 20:01:55 +00:00
/*
* Bad devices in non-replicated config.
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
find_vdev_problem(nvroot, vdev_faulted))
return (ZPOOL_STATUS_FAULTED_DEV_NR);
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
find_vdev_problem(nvroot, vdev_missing))
return (ZPOOL_STATUS_MISSING_DEV_NR);
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
find_vdev_problem(nvroot, vdev_broken))
return (ZPOOL_STATUS_CORRUPT_LABEL_NR);
/*
* Corrupted pool metadata
*/
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
vs->vs_aux == VDEV_AUX_CORRUPT_DATA)
return (ZPOOL_STATUS_CORRUPT_POOL);
/*
* Persistent data errors.
*/
if (!isimport) {
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRCOUNT,
&nerr) == 0 && nerr != 0)
return (ZPOOL_STATUS_CORRUPT_DATA);
}
/*
* Missing devices in a replicated config.
*/
if (find_vdev_problem(nvroot, vdev_faulted))
return (ZPOOL_STATUS_FAULTED_DEV_R);
if (find_vdev_problem(nvroot, vdev_missing))
return (ZPOOL_STATUS_MISSING_DEV_R);
if (find_vdev_problem(nvroot, vdev_broken))
return (ZPOOL_STATUS_CORRUPT_LABEL_R);
/*
* Devices with errors
*/
if (!isimport && find_vdev_problem(nvroot, vdev_errors))
return (ZPOOL_STATUS_FAILING_DEV);
/*
* Offlined devices
*/
if (find_vdev_problem(nvroot, vdev_offlined))
return (ZPOOL_STATUS_OFFLINE_DEV);
2009-08-18 18:43:27 +00:00
/*
* Removed device
*/
if (find_vdev_problem(nvroot, vdev_removed))
return (ZPOOL_STATUS_REMOVED_DEV);
2008-11-20 20:01:55 +00:00
/*
* Outdated, but usable, version
*/
if (SPA_VERSION_IS_SUPPORTED(version) && version != SPA_VERSION)
2008-11-20 20:01:55 +00:00
return (ZPOOL_STATUS_VERSION_OLDER);
/*
* Usable pool with disabled features
*/
if (version >= SPA_VERSION_FEATURES) {
int i;
nvlist_t *feat;
if (isimport) {
feat = fnvlist_lookup_nvlist(config,
ZPOOL_CONFIG_LOAD_INFO);
feat = fnvlist_lookup_nvlist(feat,
ZPOOL_CONFIG_ENABLED_FEAT);
} else {
feat = fnvlist_lookup_nvlist(config,
ZPOOL_CONFIG_FEATURE_STATS);
}
for (i = 0; i < SPA_FEATURES; i++) {
zfeature_info_t *fi = &spa_feature_table[i];
if (!nvlist_exists(feat, fi->fi_guid))
return (ZPOOL_STATUS_FEAT_DISABLED);
}
}
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
/*
* Informational errata available.
*/
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRATA, &errata);
if (errata) {
*erratap = errata;
return (ZPOOL_STATUS_ERRATA);
}
2008-11-20 20:01:55 +00:00
return (ZPOOL_STATUS_OK);
}
zpool_status_t
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
zpool_get_status(zpool_handle_t *zhp, char **msgid, zpool_errata_t *errata)
2008-11-20 20:01:55 +00:00
{
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
zpool_status_t ret = check_status(zhp->zpool_config, B_FALSE, errata);
2008-11-20 20:01:55 +00:00
if (ret >= NMSGID)
*msgid = NULL;
else
*msgid = zfs_msgid_table[ret];
return (ret);
}
zpool_status_t
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
zpool_import_status(nvlist_t *config, char **msgid, zpool_errata_t *errata)
2008-11-20 20:01:55 +00:00
{
Add generic errata infrastructure From time to time it may be necessary to inform the pool administrator about an errata which impacts their pool. These errata will by shown to the administrator through the 'zpool status' and 'zpool import' output as appropriate. The errata must clearly describe the issue detected, how the pool is impacted, and what action should be taken to resolve the situation. Additional information for each errata will be provided at http://zfsonlinux.org/msg/ZFS-8000-ER. To accomplish the above this patch adds the required infrastructure to allow the kernel modules to notify the utilities that an errata has been detected. This is done through the ZPOOL_CONFIG_ERRATA uint64_t which has been added to the pool configuration nvlist. To add a new errata the following changes must be made: * A new errata identifier must be assigned by adding a new enum value to the zpool_errata_t type. New enums must be added to the end to preserve the existing ordering. * Code must be added to detect the issue. This does not strictly need to be done at pool import time but doing so will make the errata visible in 'zpool import' as well as 'zpool status'. Once detected the spa->spa_errata member should be set to the new enum. * If possible code should be added to clear the spa->spa_errata member once the errata has been resolved. * The show_import() and status_callback() functions must be updated to include an informational message describing the errata. This should include an action message describing what an administrator should do to address the errata. * The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be updated to describe the errata. This space can be used to provide as much additional information as needed to fully describe the errata. A link to this documentation will be automatically generated in the output of 'zpool import' and 'zpool status'. Original-idea-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com> Signed-off-by: Richard Yao <ryao@gentoo.or Issue #2094
2014-02-21 03:57:17 +00:00
zpool_status_t ret = check_status(config, B_TRUE, errata);
2008-11-20 20:01:55 +00:00
if (ret >= NMSGID)
*msgid = NULL;
else
*msgid = zfs_msgid_table[ret];
return (ret);
}
static void
dump_ddt_stat(const ddt_stat_t *dds, int h)
{
char refcnt[6];
char blocks[6], lsize[6], psize[6], dsize[6];
char ref_blocks[6], ref_lsize[6], ref_psize[6], ref_dsize[6];
if (dds == NULL || dds->dds_blocks == 0)
return;
if (h == -1)
(void) strcpy(refcnt, "Total");
else
zfs_nicenum(1ULL << h, refcnt, sizeof (refcnt));
zfs_nicenum(dds->dds_blocks, blocks, sizeof (blocks));
zfs_nicebytes(dds->dds_lsize, lsize, sizeof (lsize));
zfs_nicebytes(dds->dds_psize, psize, sizeof (psize));
zfs_nicebytes(dds->dds_dsize, dsize, sizeof (dsize));
zfs_nicenum(dds->dds_ref_blocks, ref_blocks, sizeof (ref_blocks));
zfs_nicebytes(dds->dds_ref_lsize, ref_lsize, sizeof (ref_lsize));
zfs_nicebytes(dds->dds_ref_psize, ref_psize, sizeof (ref_psize));
zfs_nicebytes(dds->dds_ref_dsize, ref_dsize, sizeof (ref_dsize));
(void) printf("%6s %6s %5s %5s %5s %6s %5s %5s %5s\n",
refcnt,
blocks, lsize, psize, dsize,
ref_blocks, ref_lsize, ref_psize, ref_dsize);
}
/*
* Print the DDT histogram and the column totals.
*/
void
zpool_dump_ddt(const ddt_stat_t *dds_total, const ddt_histogram_t *ddh)
{
int h;
(void) printf("\n");
(void) printf("bucket "
" allocated "
" referenced \n");
(void) printf("______ "
"______________________________ "
"______________________________\n");
(void) printf("%6s %6s %5s %5s %5s %6s %5s %5s %5s\n",
"refcnt",
"blocks", "LSIZE", "PSIZE", "DSIZE",
"blocks", "LSIZE", "PSIZE", "DSIZE");
(void) printf("%6s %6s %5s %5s %5s %6s %5s %5s %5s\n",
"------",
"------", "-----", "-----", "-----",
"------", "-----", "-----", "-----");
for (h = 0; h < 64; h++)
dump_ddt_stat(&ddh->ddh_stat[h], h);
dump_ddt_stat(dds_total, -1);
(void) printf("\n");
}