Archive-Team
/
zfs
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 103 Wiki Activity
zfs/tests/runfiles/linux.run

225 lines
7.7 KiB
Plaintext
Raw Normal View History

Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source. A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#
[DEFAULT]
pre = setup
quiet = False
pre_user = root
user = root
timeout = 600
post_user = root
post = cleanup
ZTS: Add a failsafe callback to run after each test Tests that get killed do not have an opportunity to clean up. There are many bad states this can leave the system in, but of particular gravity is when zinject has been used to induce bad behavior for one or more of the test disks. Create a failsafe mechanism in test-runner.py that runs a callback script after every test. The script is common to all tests so all tests benefit from the protection. Add an obligatory `zinject -c all` to clear all zinject state after every test case is run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10096
2020-03-10 18:00:56 +00:00
failsafe_user = root
failsafe = callbacks/zfs_failsafe
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
outputdir = /var/tmp/test_results
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional']
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/acl/posix:Linux]
Linux: Initialize zp in zfs_setattr_dir The value of zp is used without having been initialized under some conditions. Initialize the pointer to NULL. Add a regression test case using chown in acl/posix. However, this is not enough because the setup sets xattr=sa, which means zfs_setattr_dir will not be called. Create a second group of acl tests in acl/posix-sa duplicating the acl/posix tests with symlinks, and remove xattr=sa from the original acl/posix tests. This provides more coverage for the default xattr=on code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10043 Closes #11025
2020-10-09 16:27:14 +00:00
tests = ['posix_001_pos', 'posix_002_pos', 'posix_003_pos', 'posix_004_pos']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'acl', 'posix']
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
Linux: Initialize zp in zfs_setattr_dir The value of zp is used without having been initialized under some conditions. Initialize the pointer to NULL. Add a regression test case using chown in acl/posix. However, this is not enough because the setup sets xattr=sa, which means zfs_setattr_dir will not be called. Create a second group of acl tests in acl/posix-sa duplicating the acl/posix tests with symlinks, and remove xattr=sa from the original acl/posix tests. This provides more coverage for the default xattr=on code. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10043 Closes #11025
2020-10-09 16:27:14 +00:00
[tests/functional/acl/posix-sa:Linux]
tests = ['posix_001_pos', 'posix_002_pos', 'posix_003_pos', 'posix_004_pos']
tags = ['functional', 'acl', 'posix-sa']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/atime:Linux]
ZTS: Move atime_003 to linux.run This test verifies relatime behavior, which is only present on Linux. Move the test to linux.run Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #10046
2020-02-25 23:27:41 +00:00
tests = ['atime_003_pos', 'root_relatime_on']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'atime']
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
zts: block cloning tests Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc. Closes #15050 Closes #405 Closes #13349
2023-07-11 10:46:33 +00:00
[tests/functional/block_cloning:Linux]
Enable block_cloning tests on FreeBSD Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net> Closes #15749
2024-01-12 19:57:13 +00:00
tests = ['block_cloning_ficlone', 'block_cloning_ficlonerange',
'block_cloning_ficlonerange_partial', 'block_cloning_disabled_ficlone',
'block_cloning_disabled_ficlonerange']
zts: block cloning tests Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc. Closes #15050 Closes #405 Closes #13349
2023-07-11 10:46:33 +00:00
tags = ['functional', 'block_cloning']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/chattr:Linux]
Add test for chattr Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-12-16 23:15:48 +00:00
tests = ['chattr_001_pos', 'chattr_002_neg']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'chattr']
Add test for chattr Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
2016-12-16 23:15:48 +00:00
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/cli_root/zfs:Linux]
tests = ['zfs_003_neg']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'cli_root', 'zfs']
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/cli_root/zfs_mount:Linux]
Fix memleak in cmd/mount_zfs.c Convert dynamic allocation to static buffer, simplify parse_dataset function return path. Add tests specific to the mount helper. Reviewed-by: Mateusz Guzik <mjguzik@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Sterling Jensen <sterlingjensen@users.noreply.github.com> Closes #11098
2020-11-10 23:50:44 +00:00
tests = ['zfs_mount_006_pos', 'zfs_mount_008_pos', 'zfs_mount_013_pos',
'zfs_mount_014_neg', 'zfs_multi_mount']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'cli_root', 'zfs_mount']
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
Remove dependency on sharetab file and refactor sharing logic == Motivation and Context The current implementation of 'sharenfs' and 'sharesmb' relies on the use of the sharetab file. The use of this file is os-specific and not required by linux or freebsd. Currently the code must maintain updates to this file which adds complexity and presents a significant performance impact when sharing many datasets. In addition, concurrently running 'zfs sharenfs' command results in missing entries in the sharetab file leading to unexpected failures. == Description This change removes the sharetab logic from the linux and freebsd implementation of 'sharenfs' and 'sharesmb'. It still preserves an os-specific library which contains the logic required for sharing NFS or SMB. The following entry points exist in the vastly simplified libshare library: - sa_enable_share -- shares a dataset but may not commit the change - sa_disable_share -- unshares a dataset but may not commit the change - sa_is_shared -- determine if a dataset is shared - sa_commit_share -- notify NFS/SMB subsystem to commit the shares - sa_validate_shareopts -- determine if sharing options are valid The sa_commit_share entry point is provided as a performance enhancement and is not required. The sa_enable_share/sa_disable_share may commit the share as part of the implementation. Libshare provides a framework for both NFS and SMB but some operating systems may not fully support these protocols or all features of the protocol. NFS Operation: For linux, libshare updates /etc/exports.d/zfs.exports to add and remove shares and then commits the changes by invoking 'exportfs -r'. This file, is automatically read by the kernel NFS implementation which makes for better integration with the NFS systemd service. For FreeBSD, libshare updates /etc/zfs/exports to add and remove shares and then commits the changes by sending a SIGHUP to mountd. SMB Operation: For linux, libshare adds and removes files in /var/lib/samba/usershares by calling the 'net' command directly. There is no need to commit the changes. FreeBSD does not support SMB. == Performance Results To test sharing performance we created a pool with an increasing number of datasets and invoked various zfs actions that would enable and disable sharing. The performance testing was limited to NFS sharing. The following tests were performed on an 8 vCPU system with 128GB and a pool comprised of 4 50GB SSDs: Scale testing: - Share all filesystems in parallel -- zfs sharenfs=on <dataset> & - Unshare all filesystems in parallel -- zfs sharenfs=off <dataset> & Functional testing: - share each filesystem serially -- zfs share -a - unshare each filesystem serially -- zfs unshare -a - reset sharenfs property and unshare -- zfs inherit -r sharenfs <pool> For 'zfs sharenfs=on' scale testing we saw an average reduction in time of 89.43% and for 'zfs sharenfs=off' we saw an average reduction in time of 83.36%. Functional testing also shows a huge improvement: - zfs share -- 97.97% reduction in time - zfs unshare -- 96.47% reduction in time - zfs inhert -r sharenfs -- 99.01% reduction in time Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Bryant G. Ly <bryangly@gmail.com> Signed-off-by: George Wilson <gwilson@delphix.com> External-Issue: DLPX-68690 Closes #1603 Closes #7692 Closes #7943 Closes #10300
2020-07-13 16:19:18 +00:00
[tests/functional/cli_root/zfs_share:Linux]
'zfs share -a' should clean noauto exports This is a follow on to PR #10688 where `zfs share -a` allows the sharing of canmount=noauto datasets if they are mounted. However, when a dataset with canmount=noauto is not mounted, the command should also purge any existing entries from the exports file. Otherwise, after a reboot, the nfs server attempts to export the underlying mountpath, not the dataset. This can lead to a hard hang for existing client mounts. Instead of just skipping the adding of an export if not mounted and canmount=noauto, have it also remove an existing export of the dataset so that, after a reboot, we don't export an unmounted dataset. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Wilson <gwilson@delphix.com> Signed-off-by: Don Brady <don.brady@delphix.com> Closes #10747
2020-08-20 20:12:12 +00:00
tests = ['zfs_share_005_pos', 'zfs_share_007_neg', 'zfs_share_009_neg',
libshare: nfs: pass through ipv6 addresses in bracket notation Recognize when the host part of a sharenfs attribute is an ipv6 Literal and pass that through without modification. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Felix Dörre <felix@dogcraft.de> Closes: #11171 Closes #11939 Closes: #1894
2021-10-20 17:40:00 +00:00
'zfs_share_012_pos', 'zfs_share_013_pos']
Remove dependency on sharetab file and refactor sharing logic == Motivation and Context The current implementation of 'sharenfs' and 'sharesmb' relies on the use of the sharetab file. The use of this file is os-specific and not required by linux or freebsd. Currently the code must maintain updates to this file which adds complexity and presents a significant performance impact when sharing many datasets. In addition, concurrently running 'zfs sharenfs' command results in missing entries in the sharetab file leading to unexpected failures. == Description This change removes the sharetab logic from the linux and freebsd implementation of 'sharenfs' and 'sharesmb'. It still preserves an os-specific library which contains the logic required for sharing NFS or SMB. The following entry points exist in the vastly simplified libshare library: - sa_enable_share -- shares a dataset but may not commit the change - sa_disable_share -- unshares a dataset but may not commit the change - sa_is_shared -- determine if a dataset is shared - sa_commit_share -- notify NFS/SMB subsystem to commit the shares - sa_validate_shareopts -- determine if sharing options are valid The sa_commit_share entry point is provided as a performance enhancement and is not required. The sa_enable_share/sa_disable_share may commit the share as part of the implementation. Libshare provides a framework for both NFS and SMB but some operating systems may not fully support these protocols or all features of the protocol. NFS Operation: For linux, libshare updates /etc/exports.d/zfs.exports to add and remove shares and then commits the changes by invoking 'exportfs -r'. This file, is automatically read by the kernel NFS implementation which makes for better integration with the NFS systemd service. For FreeBSD, libshare updates /etc/zfs/exports to add and remove shares and then commits the changes by sending a SIGHUP to mountd. SMB Operation: For linux, libshare adds and removes files in /var/lib/samba/usershares by calling the 'net' command directly. There is no need to commit the changes. FreeBSD does not support SMB. == Performance Results To test sharing performance we created a pool with an increasing number of datasets and invoked various zfs actions that would enable and disable sharing. The performance testing was limited to NFS sharing. The following tests were performed on an 8 vCPU system with 128GB and a pool comprised of 4 50GB SSDs: Scale testing: - Share all filesystems in parallel -- zfs sharenfs=on <dataset> & - Unshare all filesystems in parallel -- zfs sharenfs=off <dataset> & Functional testing: - share each filesystem serially -- zfs share -a - unshare each filesystem serially -- zfs unshare -a - reset sharenfs property and unshare -- zfs inherit -r sharenfs <pool> For 'zfs sharenfs=on' scale testing we saw an average reduction in time of 89.43% and for 'zfs sharenfs=off' we saw an average reduction in time of 83.36%. Functional testing also shows a huge improvement: - zfs share -- 97.97% reduction in time - zfs unshare -- 96.47% reduction in time - zfs inhert -r sharenfs -- 99.01% reduction in time Reviewed-by: Matt Ahrens <matt@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@ixsystems.com> Reviewed-by: Bryant G. Ly <bryangly@gmail.com> Signed-off-by: George Wilson <gwilson@delphix.com> External-Issue: DLPX-68690 Closes #1603 Closes #7692 Closes #7943 Closes #10300
2020-07-13 16:19:18 +00:00
tags = ['functional', 'cli_root', 'zfs_share']
ZTS: add existing tests to runfiles Some test cases were committed to the repository but never added to runfiles. Move `zfs_unshare_008_pos` to the Linux-only runfile. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: szubersk <szuberskidamian@gmail.com> Closes #14701
2023-04-06 17:43:24 +00:00
[tests/functional/cli_root/zfs_unshare:Linux]
tests = ['zfs_unshare_008_pos']
tags = ['functional', 'cli_root', 'zfs_unshare']
ZTS: Move more tests to linux.run Tests that rely on special filesystems that are specific to Linux should only be run on Linux. Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <guss80@gmail.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9512
2019-10-26 03:03:46 +00:00
[tests/functional/cli_root/zfs_sysfs:Linux]
tests = ['zfeature_set_unsupported', 'zfs_get_unsupported',
'zfs_set_unsupported', 'zfs_sysfs_live', 'zpool_get_unsupported',
'zpool_set_unsupported']
tags = ['functional', 'cli_root', 'zfs_sysfs']
ZTS: Move more tests out of common.run These tests won't run on all platforms as currently implemented: * add_nested_replacing_spare (needs zed) * fault (needs zed) * mmp (needs multihost_history) * umount_unlink_drained (needs procfs) * zpool_expand (needs udev events and zed) * zpool_reopen (needs scsi_debug) * zvol_swap_003_pos (needs to modify vfstab) * zvol_swap_00[56]_pos (needs swaphigh/swaplen) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9871
2020-01-27 21:29:25 +00:00
[tests/functional/cli_root/zpool_add:Linux]
tests = ['add_nested_replacing_spare']
tags = ['functional', 'cli_root', 'zpool_add']
[tests/functional/cli_root/zpool_expand:Linux]
tests = ['zpool_expand_001_pos', 'zpool_expand_002_pos',
'zpool_expand_003_neg', 'zpool_expand_004_pos', 'zpool_expand_005_pos']
tags = ['functional', 'cli_root', 'zpool_expand']
ZTS: Move zpool_import_hostid_changed* tests to Linux runfile Relocate the zpool_import_hostid_changed* test cases to the Linux runfile until these tests are modified to run cleanly on FreeBSD. Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #15377
2023-10-10 00:22:44 +00:00
[tests/functional/cli_root/zpool_import:Linux]
tests = ['zpool_import_hostid_changed',
'zpool_import_hostid_changed_unclean_export',
'zpool_import_hostid_changed_cachefile',
'zpool_import_hostid_changed_cachefile_unclean_export']
tags = ['functional', 'cli_root', 'zpool_import']
ZTS: Move more tests out of common.run These tests won't run on all platforms as currently implemented: * add_nested_replacing_spare (needs zed) * fault (needs zed) * mmp (needs multihost_history) * umount_unlink_drained (needs procfs) * zpool_expand (needs udev events and zed) * zpool_reopen (needs scsi_debug) * zvol_swap_003_pos (needs to modify vfstab) * zvol_swap_00[56]_pos (needs swaphigh/swaplen) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9871
2020-01-27 21:29:25 +00:00
[tests/functional/cli_root/zpool_reopen:Linux]
tests = ['zpool_reopen_001_pos', 'zpool_reopen_002_pos',
'zpool_reopen_003_pos', 'zpool_reopen_004_pos', 'zpool_reopen_005_pos',
'zpool_reopen_006_neg', 'zpool_reopen_007_pos']
tags = ['functional', 'cli_root', 'zpool_reopen']
ZTS: Move zpool_split_wholedisks to linux.run This test uses the scsi_debug Linux kernel module. Move the test to linux.run until we have an alternative to scsi_debug worked out on FreeBSD. Reviewed-by: John Kennedy <john.kennedy@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #9984
2020-02-12 20:59:28 +00:00
[tests/functional/cli_root/zpool_split:Linux]
tests = ['zpool_split_wholedisk']
tags = ['functional', 'cli_root', 'zpool_split']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/compression:Linux]
tests = ['compress_004_pos']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'compression']
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/devices:Linux]
Enable remaining tests Enable most of the remaining test cases which were previously disabled. The required fixes are as follows: * cache_001_pos - No changes required. * cache_010_neg - Updated to use losetup under Linux. Loopback cache devices are allowed, ZVOLs as cache devices are not. Disabled until all the builders pass reliably. * cachefile_001_pos, cachefile_002_pos, cachefile_003_pos, cachefile_004_pos - Set set_device_dir path in cachefile.cfg, updated CPATH1 and CPATH2 to reference unique files. * zfs_clone_005_pos - Wait for udev to create volumes. * zfs_mount_007_pos - Updated mount options to expected Linux names. * zfs_mount_009_neg, zfs_mount_all_001_pos - No changes required. * zfs_unmount_005_pos, zfs_unmount_009_pos, zfs_unmount_all_001_pos - Updated to expect -f to not unmount busy mount points under Linux. * rsend_019_pos - Observed to occasionally take a long time on both 32-bit systems and the kmemleak builder. * zfs_written_property_001_pos - Switched sync(1) to sync_pool. * devices_001_pos, devices_002_neg - Updated create_dev_file() helper for Linux. * exec_002_neg.ksh - Fixed mmap_exec.c to preserve errno. Updated test case to expect EPERM from Linux as described by mmap(2). * grow_pool_001_pos - Adding missing setup.ksh and cleanup.ksh scripts from OpenZFS. * grow_replicas_001_pos.ksh - Added missing $SLICE_* variables. * history_004_pos, history_006_neg, history_008_pos - Fixed by previous commits and were not enabled. No changes required. * zfs_allow_010_pos - Added missing spaces after assorted zfs commands in delegate_common.kshlib. * inuse_* - Illumos dump device tests skipped. Remaining test cases updated to correctly create required partitions. * large_files_001_pos - Fixed largest_file.c to accept EINVAL as well as EFBIG as described in write(2). * link_count_001 - Added nproc to required commands. * umountall_001 - Updated to use umount -a. * online_offline_001_* - Pull in OpenZFS change to file_trunc.c to make the '-c 0' option run the test in a loop. Included online_offline.cfg file in all test cases. * rename_dirs_001_pos - Updated to use the rename_dir test binary, pkill restricted to exact matches and total runtime reduced. * slog_013_neg, write_dirs_002_pos - No changes required. * slog_013_pos.ksh - Updated to use losetup under Linux. * slog_014_pos.ksh - ZED will not be running, manually degrade the damaged vdev as expected. * nopwrite_varying_compression, nopwrite_volume - Forced pool sync with sync_pool to ensure up to date property values. * Fixed typos in ZED log messages. Refactored zed_* helper functions to resolve all-syslog exit=1 errors in zedlog. * zfs_copies_005_neg, zfs_get_004_pos, zpool_add_004_pos, zpool_destroy_001_pos, largest_pool_001_pos, clone_001_pos.ksh, clone_001_pos, - Skip until layering pools on zvols is solid. * largest_pool_001_pos - Limited to 7eb pool, maximum supported size in 8eb-1 on Linux. * zpool_expand_001_pos, zpool_expand_003_neg - Requires additional support from the ZED, updated skip reason. * zfs_rollback_001_pos, zfs_rollback_002_pos - Properly cleanup busy mount points under Linux between test loops. * privilege_001_pos, privilege_003_pos, rollback_003_pos, threadsappend_001_pos - Skip with log_unsupported. * snapshot_016_pos - No changes required. * snapshot_008_pos - Increased LIMIT from 512K to 2M and added sync_pool to avoid false positives. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6128
2017-05-19 00:21:15 +00:00
tests = ['devices_001_pos', 'devices_002_neg', 'devices_003_pos']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'devices']
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/events:Linux]
ZTS: test reported checksum errors for ZED Test checksum error reporting to ZED via the call paths vdev_raidz_io_done_unrecoverable() and zio_checksum_verify(). Sponsored-by: Seagate Technology LLC Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Wing <rob.wing@klarasystems.com> Closes #14190
2022-11-14 07:57:53 +00:00
tests = ['events_001_pos', 'events_002_pos', 'zed_rc_filter', 'zed_fd_spill',
Add slow disk diagnosis to ZED Slow disk response times can be indicative of a failing drive. ZFS currently tracks slow I/Os (slower than zio_slow_io_ms) and generates events (ereport.fs.zfs.delay). However, no action is taken by ZED, like is done for checksum or I/O errors. This change adds slow disk diagnosis to ZED which is opt-in using new VDEV properties: VDEV_PROP_SLOW_IO_N VDEV_PROP_SLOW_IO_T If multiple VDEVs in a pool are undergoing slow I/Os, then it skips the zpool_vdev_degrade(). Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Rob Wing <rob.wing@klarasystems.com> Signed-off-by: Don Brady <don.brady@klarasystems.com> Closes #15469
2024-02-08 17:19:52 +00:00
'zed_cksum_reported', 'zed_cksum_config', 'zed_io_config',
'zed_slow_io', 'zed_slow_io_many_vdevs']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'events']
Add zpool events tests * events_001_pos - Verify the expected events are generated when invoking the various zpool sub-commands. These events must appear in `zpool event` and be consumed by the ZED. * events_002_pos - Verify the ZED consumes events which were generated while it wasn't running when it is started. Additionally, verify that events are only processed once. As part of this change the default.cfg used by the test suite was changed to a default.cfg.in file. This was needed so the install location of all zed scripts, not only the enabled ones, could be reliably determined. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6128
2017-05-18 19:57:21 +00:00
Add Linux posix_fadvise support The purpose of this PR is to accepts fadvise ioctl from userland to do read-ahead by demand. It could dramatically improve sequential read performance especially when primarycache is set to metadata or zfs_prefetch_disable is 1. If the file is mmaped, generic_fadvise is also called for page cache read-ahead besides dmu_prefetch. Only POSIX_FADV_WILLNEED and POSIX_FADV_SEQUENTIAL are supported in this PR currently. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Finix Yan <yancw@info2soft.com> Closes #13694
2022-09-08 17:29:41 +00:00
[tests/functional/fadvise:Linux]
tests = ['fadvise_sequential']
tags = ['functional', 'fadvise']
linux: add basic fallocate(mode=0/2) compatibility Implement semi-compatible functionality for mode=0 (preallocation) and mode=FALLOC_FL_KEEP_SIZE (preallocation beyond EOF) for ZPL. Since ZFS does COW and snapshots, preallocating blocks for a file cannot guarantee that writes to the file will not run out of space. Even if the first overwrite was guaranteed, it would not handle any later overwrite of blocks due to COW, so strict compliance is futile. Instead, make a best-effort check that at least enough free space is currently available in the pool (with a bit of margin), then create a sparse file of the requested size and continue on with life. This does not handle all cases (e.g. several fallocate() calls before writing into the files when the filesystem is nearly full), which would require a more complex mechanism to be implemented, probably based on a modified version of dmu_prealloc(), but is usable as-is. A new module option zfs_fallocate_reserve_percent is used to control the reserve margin for any single fallocate call. By default, this is 110% of the requested preallocation size, so an additional 10% of available space is reserved for overhead to allow the application a good chance of finishing the write when the fallocate() succeeds. If the heuristics of this basic fallocate implementation are not desirable, the old non-functional behavior of returning EOPNOTSUPP for calls can be restored by setting zfs_fallocate_reserve_percent=0. The parameter of zfs_statvfs() is changed to take an inode instead of a dentry, since no dentry is available in zfs_fallocate_common(). A few tests from @behlendorf cover basic fallocate functionality. Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Arshad Hussain <arshad.super@gmail.com> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Andreas Dilger <adilger@dilger.ca> Issue #326 Closes #10408
2020-06-18 18:22:11 +00:00
[tests/functional/fallocate:Linux]
Corrected oversight in ZERO_RANGE behavior It turns out, no, in fact, ZERO_RANGE and PUNCH_HOLE do have differing semantics in some ways - in particular, one requires KEEP_SIZE, and the other does not. Also added a zero-range test to catch this, corrected a flaw that made the punch-hole test succeed vacuously, and a typo in file_write. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rich Ercolani <rincebrain@gmail.com> Closes #13329 Closes #13338
2022-04-20 23:07:03 +00:00
tests = ['fallocate_prealloc', 'fallocate_zero-range']
linux: add basic fallocate(mode=0/2) compatibility Implement semi-compatible functionality for mode=0 (preallocation) and mode=FALLOC_FL_KEEP_SIZE (preallocation beyond EOF) for ZPL. Since ZFS does COW and snapshots, preallocating blocks for a file cannot guarantee that writes to the file will not run out of space. Even if the first overwrite was guaranteed, it would not handle any later overwrite of blocks due to COW, so strict compliance is futile. Instead, make a best-effort check that at least enough free space is currently available in the pool (with a bit of margin), then create a sparse file of the requested size and continue on with life. This does not handle all cases (e.g. several fallocate() calls before writing into the files when the filesystem is nearly full), which would require a more complex mechanism to be implemented, probably based on a modified version of dmu_prealloc(), but is usable as-is. A new module option zfs_fallocate_reserve_percent is used to control the reserve margin for any single fallocate call. By default, this is 110% of the requested preallocation size, so an additional 10% of available space is reserved for overhead to allow the application a good chance of finishing the write when the fallocate() succeeds. If the heuristics of this basic fallocate implementation are not desirable, the old non-functional behavior of returning EOPNOTSUPP for calls can be restored by setting zfs_fallocate_reserve_percent=0. The parameter of zfs_statvfs() is changed to take an inode instead of a dentry, since no dentry is available in zfs_fallocate_common(). A few tests from @behlendorf cover basic fallocate functionality. Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Arshad Hussain <arshad.super@gmail.com> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Andreas Dilger <adilger@dilger.ca> Issue #326 Closes #10408
2020-06-18 18:22:11 +00:00
tags = ['functional', 'fallocate']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/fault:Linux]
ZED: Match added disk by pool/vdev GUID if found (#12217) This enables ZED to auto-online vdevs that are not wholedisk managed by ZFS. Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Don Brady <don.brady@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov>
2021-06-30 14:37:20 +00:00
tests = ['auto_offline_001_pos', 'auto_online_001_pos', 'auto_online_002_pos',
Fix ZED auto-replace for VDEVs using by-id paths The change is simple -- restore the original code so that the VDEV path is updated when using by-id paths. The more challenging part was to devise a second ZTS test, that would test auto-replace for 'by-id' and help prevent a future regression. With that new test, we can now do an A|B test with , and without, the fix to confirm that auto-replace for by-id paths works. The existing auto-replace test, functional/fault/auto_replace_001_pos, will confirm that we didn't break auto-replace for 'by-vdev' paths. In the original functional/fault/auto_replace_001_pos test, the disk wipe (using dd) was not effective in removing the partitioning since the kernel was never informed of the wipe. Added a call to wipefs(8) so that the kernel is informed and ZED will re-partition the device. Added a validation step that the re-partitioning occurred by confirming that the GPT partition UUID changes. Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc. Reviewed-by: Rob Norris <rob.norris@klarasystems.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Don Brady <don.brady@klarasystems.com> Closes #15363
2023-10-20 16:29:02 +00:00
'auto_replace_001_pos', 'auto_replace_002_pos', 'auto_spare_001_pos',
'auto_spare_002_pos', 'auto_spare_multiple', 'auto_spare_ashift',
'auto_spare_shared', 'decrypt_fault', 'decompress_fault',
'scrub_after_resilver', 'zpool_status_-s']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'fault']
Add auto-online test for ZED/FMA as part of the ZTS Automated auto-online test to go along with ZED FMA integration (PR 4673) auto_online_001.pos works with real devices (sd- and mpath) and with non-real block devices (loop) by adding a scsi_debug device to the pool Note: In order for test group to run, ZED must not currently be running. Kernel 3.16.37 or higher needed for scsi_debug to work properly If timeout occurs on test using a scsi_debug device (error noticed on Ubuntu system), a reboot might be needed in order for test to pass. (more investigation into this) Also suppressed output from is_real_device/is_loop_device/is_mpath_device - was making the log file very cluttered with useless error messages "ie /dev/mapper/sdc is not a block device" from previous patch Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: David Quigley <david.quigley@intel.com> Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com> Closes #5774
2016-09-23 20:51:08 +00:00
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/features/large_dnode:Linux]
tests = ['large_dnode_002_pos', 'large_dnode_006_pos', 'large_dnode_008_pos']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'features', 'large_dnode']
Implement large_dnode pool feature Justification ------------- This feature adds support for variable length dnodes. Our motivation is to eliminate the overhead associated with using spill blocks. Spill blocks are used to store system attribute data (i.e. file metadata) that does not fit in the dnode's bonus buffer. By allowing a larger bonus buffer area the use of a spill block can be avoided. Spill blocks potentially incur an additional read I/O for every dnode in a dnode block. As a worst case example, reading 32 dnodes from a 16k dnode block and all of the spill blocks could issue 33 separate reads. Now suppose those dnodes have size 1024 and therefore don't need spill blocks. Then the worst case number of blocks read is reduced to from 33 to two--one per dnode block. In practice spill blocks may tend to be co-located on disk with the dnode blocks so the reduction in I/O would not be this drastic. In a badly fragmented pool, however, the improvement could be significant. ZFS-on-Linux systems that make heavy use of extended attributes would benefit from this feature. In particular, ZFS-on-Linux supports the xattr=sa dataset property which allows file extended attribute data to be stored in the dnode bonus buffer as an alternative to the traditional directory-based format. Workloads such as SELinux and the Lustre distributed filesystem often store enough xattr data to force spill bocks when xattr=sa is in effect. Large dnodes may therefore provide a performance benefit to such systems. Other use cases that may benefit from this feature include files with large ACLs and symbolic links with long target names. Furthermore, this feature may be desirable on other platforms in case future applications or features are developed that could make use of a larger bonus buffer area. Implementation -------------- The size of a dnode may be a multiple of 512 bytes up to the size of a dnode block (currently 16384 bytes). A dn_extra_slots field was added to the current on-disk dnode_phys_t structure to describe the size of the physical dnode on disk. The 8 bits for this field were taken from the zero filled dn_pad2 field. The field represents how many "extra" dnode_phys_t slots a dnode consumes in its dnode block. This convention results in a value of 0 for 512 byte dnodes which preserves on-disk format compatibility with older software. Similarly, the in-memory dnode_t structure has a new dn_num_slots field to represent the total number of dnode_phys_t slots consumed on disk. Thus dn->dn_num_slots is 1 greater than the corresponding dnp->dn_extra_slots. This difference in convention was adopted because, unlike on-disk structures, backward compatibility is not a concern for in-memory objects, so we used a more natural way to represent size for a dnode_t. The default size for newly created dnodes is determined by the value of a new "dnodesize" dataset property. By default the property is set to "legacy" which is compatible with older software. Setting the property to "auto" will allow the filesystem to choose the most suitable dnode size. Currently this just sets the default dnode size to 1k, but future code improvements could dynamically choose a size based on observed workload patterns. Dnodes of varying sizes can coexist within the same dataset and even within the same dnode block. For example, to enable automatically-sized dnodes, run # zfs set dnodesize=auto tank/fish The user can also specify literal values for the dnodesize property. These are currently limited to powers of two from 1k to 16k. The power-of-2 limitation is only for simplicity of the user interface. Internally the implementation can handle any multiple of 512 up to 16k, and consumers of the DMU API can specify any legal dnode value. The size of a new dnode is determined at object allocation time and stored as a new field in the znode in-memory structure. New DMU interfaces are added to allow the consumer to specify the dnode size that a newly allocated object should use. Existing interfaces are unchanged to avoid having to update every call site and to preserve compatibility with external consumers such as Lustre. The new interfaces names are given below. The versions of these functions that don't take a dnodesize parameter now just call the _dnsize() versions with a dnodesize of 0, which means use the legacy dnode size. New DMU interfaces: dmu_object_alloc_dnsize() dmu_object_claim_dnsize() dmu_object_reclaim_dnsize() New ZAP interfaces: zap_create_dnsize() zap_create_norm_dnsize() zap_create_flags_dnsize() zap_create_claim_norm_dnsize() zap_create_link_dnsize() The constant DN_MAX_BONUSLEN is renamed to DN_OLD_MAX_BONUSLEN. The spa_maxdnodesize() function should be used to determine the maximum bonus length for a pool. These are a few noteworthy changes to key functions: * The prototype for dnode_hold_impl() now takes a "slots" parameter. When the DNODE_MUST_BE_FREE flag is set, this parameter is used to ensure the hole at the specified object offset is large enough to hold the dnode being created. The slots parameter is also used to ensure a dnode does not span multiple dnode blocks. In both of these cases, if a failure occurs, ENOSPC is returned. Keep in mind, these failure cases are only possible when using DNODE_MUST_BE_FREE. If the DNODE_MUST_BE_ALLOCATED flag is set, "slots" must be 0. dnode_hold_impl() will check if the requested dnode is already consumed as an extra dnode slot by an large dnode, in which case it returns ENOENT. * The function dmu_object_alloc() advances to the next dnode block if dnode_hold_impl() returns an error for a requested object. This is because the beginning of the next dnode block is the only location it can safely assume to either be a hole or a valid starting point for a dnode. * dnode_next_offset_level() and other functions that iterate through dnode blocks may no longer use a simple array indexing scheme. These now use the current dnode's dn_num_slots field to advance to the next dnode in the block. This is to ensure we properly skip the current dnode's bonus area and don't interpret it as a valid dnode. zdb --- The zdb command was updated to display a dnode's size under the "dnsize" column when the object is dumped. For ZIL create log records, zdb will now display the slot count for the object. ztest ----- Ztest chooses a random dnodesize for every newly created object. The random distribution is more heavily weighted toward small dnodes to better simulate real-world datasets. Unused bonus buffer space is filled with non-zero values computed from the object number, dataset id, offset, and generation number. This helps ensure that the dnode traversal code properly skips the interior regions of large dnodes, and that these interior regions are not overwritten by data belonging to other dnodes. A new test visits each object in a dataset. It verifies that the actual dnode size matches what was stored in the ztest block tag when it was created. It also verifies that the unused bonus buffer space is filled with the expected data patterns. ZFS Test Suite -------------- Added six new large dnode-specific tests, and integrated the dnodesize property into existing tests for zfs allow and send/recv. Send/Receive ------------ ZFS send streams for datasets containing large dnodes cannot be received on pools that don't support the large_dnode feature. A send stream with large dnodes sets a DMU_BACKUP_FEATURE_LARGE_DNODE flag which will be unrecognized by an incompatible receiving pool so that the zfs receive will fail gracefully. While not implemented here, it may be possible to generate a backward-compatible send stream from a dataset containing large dnodes. The implementation may be tricky, however, because the send object record for a large dnode would need to be resized to a 512 byte dnode, possibly kicking in a spill block in the process. This means we would need to construct a new SA layout and possibly register it in the SA layout object. The SA layout is normally just sent as an ordinary object record. But if we are constructing new layouts while generating the send stream we'd have to build the SA layout object dynamically and send it at the end of the stream. For sending and receiving between pools that do support large dnodes, the drr_object send record type is extended with a new field to store the dnode slot count. This field was repurposed from unused padding in the structure. ZIL Replay ---------- The dnode slot count is stored in the uppermost 8 bits of the lr_foid field. The bits were unused as the object id is currently capped at 48 bits. Resizing Dnodes --------------- It should be possible to resize a dnode when it is dirtied if the current dnodesize dataset property differs from the dnode's size, but this functionality is not currently implemented. Clearly a dnode can only grow if there are sufficient contiguous unused slots in the dnode block, but it should always be possible to shrink a dnode. Growing dnodes may be useful to reduce fragmentation in a pool with many spill blocks in use. Shrinking dnodes may be useful to allow sending a dataset to a pool that doesn't support the large_dnode feature. Feature Reference Counting -------------------------- The reference count for the large_dnode pool feature tracks the number of datasets that have ever contained a dnode of size larger than 512 bytes. The first time a large dnode is created in a dataset the dataset is converted to an extensible dataset. This is a one-way operation and the only way to decrement the feature count is to destroy the dataset, even if the dataset no longer contains any large dnodes. The complexity of reference counting on a per-dnode basis was too high, so we chose to track it on a per-dataset basis similarly to the large_block feature. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3542
2016-03-17 01:25:34 +00:00
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/io:Linux]
Add basic io_uring test Provide a basic test coverage for io_uring I/O. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #11497
2021-01-23 23:42:42 +00:00
tests = ['libaio', 'io_uring']
Direct IO support Direct IO via the O_DIRECT flag was originally introduced in XFS by IRIX for database workloads. Its purpose was to allow the database to bypass the page and buffer caches to prevent unnecessary IO operations (e.g. readahead) while preventing contention for system memory between the database and kernel caches. On Illumos, there is a library function called directio(3C) that allows user space to provide a hint to the file system that Direct IO is useful, but the file system is free to ignore it. The semantics are also entirely a file system decision. Those that do not implement it return ENOTTY. Since the semantics were never defined in any standard, O_DIRECT is implemented such that it conforms to the behavior described in the Linux open(2) man page as follows. 1. Minimize cache effects of the I/O. By design the ARC is already scan-resistant which helps mitigate the need for special O_DIRECT handling. Data which is only accessed once will be the first to be evicted from the cache. This behavior is in consistent with Illumos and FreeBSD. Future performance work may wish to investigate the benefits of immediately evicting data from the cache which has been read or written with the O_DIRECT flag. Functionally this behavior is very similar to applying the 'primarycache=metadata' property per open file. 2. O_DIRECT _MAY_ impose restrictions on IO alignment and length. No additional alignment or length restrictions are imposed. 3. O_DIRECT _MAY_ perform unbuffered IO operations directly between user memory and block device. No unbuffered IO operations are currently supported. In order to support features such as transparent compression, encryption, and checksumming a copy must be made to transform the data. 4. O_DIRECT _MAY_ imply O_DSYNC (XFS). O_DIRECT does not imply O_DSYNC for ZFS. Callers must provide O_DSYNC to request synchronous semantics. 5. O_DIRECT _MAY_ disable file locking that serializes IO operations. Applications should avoid mixing O_DIRECT and normal IO or mmap(2) IO to the same file. This is particularly true for overlapping regions. All I/O in ZFS is locked for correctness and this locking is not disabled by O_DIRECT. However, concurrently mixing O_DIRECT, mmap(2), and normal I/O on the same file is not recommended. This change is implemented by layering the aops->direct_IO operations on the existing AIO operations. Code already existed in ZFS on Linux for bypassing the page cache when O_DIRECT is specified. References: * http://xfs.org/docs/xfsdocs-xml-dev/XFS_User_Guide/tmp/en-US/html/ch02s09.html * https://blogs.oracle.com/roch/entry/zfs_and_directio * https://ext4.wiki.kernel.org/index.php/Clarifying_Direct_IO's_Semantics * https://illumos.org/man/3c/directio Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com> Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #224 Closes #7823
2018-08-27 17:04:21 +00:00
tags = ['functional', 'io']
ZTS: Move largest_pool_001_pos.ksh to Linux runfile On FreeBSD pools are not allowed to be created using vdevs which are backed by ZFS volumes. This configuration is not recommended for any supported platform, nevertheless the largest_pool_001_pos.ksh test case makes use of it as a convenience. This causes the test case to fail reliably on FreeBSD. The layout is still tolerated on Linux so only perform this test on Linux. Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed by: George Melikov <mail@gmelikov.ru> Reviewed-by: Ryan Moeller <freqlabs@FreeBSD.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13166
2022-03-01 16:46:00 +00:00
[tests/functional/largest_pool:Linux]
tests = ['largest_pool_001_pos']
pre =
post =
tags = ['functional', 'largest_pool']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/mmap:Linux]
ZTS: add existing tests to runfiles Some test cases were committed to the repository but never added to runfiles. Move `zfs_unshare_008_pos` to the Linux-only runfile. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: szubersk <szuberskidamian@gmail.com> Closes #14701
2023-04-06 17:43:24 +00:00
tests = ['mmap_libaio_001_pos', 'mmap_sync_001_pos']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'mmap']
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
ZTS: Move more tests out of common.run These tests won't run on all platforms as currently implemented: * add_nested_replacing_spare (needs zed) * fault (needs zed) * mmp (needs multihost_history) * umount_unlink_drained (needs procfs) * zpool_expand (needs udev events and zed) * zpool_reopen (needs scsi_debug) * zvol_swap_003_pos (needs to modify vfstab) * zvol_swap_00[56]_pos (needs swaphigh/swaplen) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9871
2020-01-27 21:29:25 +00:00
[tests/functional/mmp:Linux]
tests = ['mmp_on_thread', 'mmp_on_uberblocks', 'mmp_on_off', 'mmp_interval',
'mmp_active_import', 'mmp_inactive_import', 'mmp_exported_import',
'mmp_write_uberblocks', 'mmp_reset_interval', 'multihost_history',
vdev probe to slow disk can stall mmp write checker Simplify vdev probes in the zio_vdev_io_done context to avoid holding the spa config lock for a long duration. Also allow zpool clear if no evidence of another host is using the pool. Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@klarasystems.com> Closes #15839
2024-04-29 21:35:53 +00:00
'mmp_on_zdb', 'mmp_write_distribution', 'mmp_hostid', 'mmp_write_slow_disk']
ZTS: Move more tests out of common.run These tests won't run on all platforms as currently implemented: * add_nested_replacing_spare (needs zed) * fault (needs zed) * mmp (needs multihost_history) * umount_unlink_drained (needs procfs) * zpool_expand (needs udev events and zed) * zpool_reopen (needs scsi_debug) * zvol_swap_003_pos (needs to modify vfstab) * zvol_swap_00[56]_pos (needs swaphigh/swaplen) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9871
2020-01-27 21:29:25 +00:00
tags = ['functional', 'mmp']
[tests/functional/mount:Linux]
tests = ['umount_unlinked_drain']
tags = ['functional', 'mount']
pam: implement a zfs_key pam module Implements a pam module for automatically loading zfs encryption keys for home datasets. The pam module: - loads a zfs key and mounts the dataset when a session opens. - unmounts the dataset and unloads the key when the session closes. - when the user is logged on and changes the password, the module changes the encryption key. Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: @jengelh <jengelh@inai.de> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Felix Dörre <felix@dogcraft.de> Closes #9886 Closes #9903
2020-06-25 01:45:44 +00:00
[tests/functional/pam:Linux]
PAM: support password changes even when not mounted There's usually no requirement that a user be logged in for changing their password, so let's not be surprising here. We need to use the fetch_lazy mechanism for the old password to avoid a double prompt for it, so that mechanism is now generalized a bit. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Felix Dörre <felix@dogcraft.de> Signed-off-by: Val Packett <val@packett.cool> Closes #14834
2023-05-06 01:17:12 +00:00
tests = ['pam_basic', 'pam_change_unmounted', 'pam_nounmount', 'pam_recursive',
'pam_short_password']
pam: implement a zfs_key pam module Implements a pam module for automatically loading zfs encryption keys for home datasets. The pam module: - loads a zfs key and mounts the dataset when a session opens. - unmounts the dataset and unloads the key when the session closes. - when the user is logged on and changes the password, the module changes the encryption key. Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: @jengelh <jengelh@inai.de> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Felix Dörre <felix@dogcraft.de> Closes #9886 Closes #9903
2020-06-25 01:45:44 +00:00
tags = ['functional', 'pam']
ZTS: Move more tests to linux.run Tests that rely on special filesystems that are specific to Linux should only be run on Linux. Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <guss80@gmail.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9512
2019-10-26 03:03:46 +00:00
[tests/functional/procfs:Linux]
tests = ['procfs_list_basic', 'procfs_list_concurrent_readers',
'procfs_list_stale_read', 'pool_state']
tags = ['functional', 'procfs']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/projectquota:Linux]
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-13 22:54:54 +00:00
tests = ['projectid_001_pos', 'projectid_002_pos', 'projectid_003_pos',
'projectquota_001_pos', 'projectquota_002_pos', 'projectquota_003_pos',
'projectquota_004_neg', 'projectquota_005_pos', 'projectquota_006_pos',
'projectquota_007_pos', 'projectquota_008_pos', 'projectquota_009_pos',
'projectspace_001_pos', 'projectspace_002_pos', 'projectspace_003_pos',
'projectspace_004_pos',
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
'projecttree_001_pos', 'projecttree_002_pos', 'projecttree_003_neg']
Project Quota on ZFS Project quota is a new ZFS system space/object usage accounting and enforcement mechanism. Similar as user/group quota, project quota is another dimension of system quota. It bases on the new object attribute - project ID. Project ID is a numerical value to indicate to which project an object belongs. An object only can belong to one project though you (the object owner or privileged user) can change the object project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly. The object also can inherit the project ID from its parent when created if the parent has the project inherit flag (that can be set via 'chattr +P' or 'zfs project -s [-p]'). By accounting the spaces/objects belong to the same project, we can know how many spaces/objects used by the project. And if we set the upper limit then we can control the spaces/objects that are consumed by such project. It is useful when multiple groups and users cooperate for the same project, or a user/group needs to participate in multiple projects. Support the following commands and functionalities: zfs set projectquota@project zfs set projectobjquota@project zfs get projectquota@project zfs get projectobjquota@project zfs get projectused@project zfs get projectobjused@project zfs projectspace zfs allow projectquota zfs allow projectobjquota zfs allow projectused zfs allow projectobjused zfs unallow projectquota zfs unallow projectobjquota zfs unallow projectused zfs unallow projectobjused chattr +/-P chattr -p project_id lsattr -p This patch also supports tree quota based on the project quota via "zfs project" commands set as following: zfs project [-d|-r] <file|directory ...> zfs project -C [-k] [-r] <file|directory ...> zfs project -c [-0] [-d|-r] [-p id] <file|directory ...> zfs project [-p id] [-r] [-s] <file|directory ...> For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on the $DIR, then the proejct [obj]quota and [obj]used values for the $DIR's project ID will be shown as the total/free (avail) resource. Keep the same behavior as EXT4/XFS does. Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com> TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master" Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c Closes #6290
2018-02-13 22:54:54 +00:00
tags = ['functional', 'projectquota']
Expose additional file level attributes ZFS allows to update and retrieve additional file level attributes for FreeBSD. This commit allows additional file level attributes to be updated and retrieved for Linux. These include the flags stored in the upper half of z_pflags only. Two new IOCTLs have been added for this purpose. ZFS_IOC_GETDOSFLAGS can be used to retrieve the attributes, while ZFS_IOC_SETDOSFLAGS can be used to update the attributes. Attributes that are allowed to be updated include ZFS_IMMUTABLE, ZFS_APPENDONLY, ZFS_NOUNLINK, ZFS_ARCHIVE, ZFS_NODUMP, ZFS_SYSTEM, ZFS_HIDDEN, ZFS_READONLY, ZFS_REPARSE, ZFS_OFFLINE and ZFS_SPARSE. Flags can be or'd together while calling ZFS_IOC_SETDOSFLAGS. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Umer Saleem <usaleem@ixsystems.com> Closes #13118
2022-03-08 01:52:03 +00:00
[tests/functional/dos_attributes:Linux]
tests = ['read_dos_attrs_001', 'write_dos_attrs_001']
tags = ['functional', 'dos_attributes']
zfs_rename: support RENAME_* flags Implement support for Linux's RENAME_* flags (for renameat2). Aside from being quite useful for userspace (providing race-free ways to exchange paths and implement mv --no-clobber), they are used by overlayfs and are thus required in order to use overlayfs-on-ZFS. In order for us to represent the new renameat2(2) flags in the ZIL, we create two new transaction types for the two flags which need transactional-level support (RENAME_EXCHANGE and RENAME_WHITEOUT). RENAME_NOREPLACE does not need any ZIL support because we know that if the operation succeeded before creating the ZIL entry, there was no file to be clobbered and thus it can be treated as a regular TX_RENAME. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Pavel Snajdr <snajpa@snajpa.net> Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Closes #12209 Closes #14070
2019-06-22 00:35:11 +00:00
[tests/functional/renameat2:Linux]
tests = ['renameat2_noreplace', 'renameat2_exchange', 'renameat2_whiteout']
tags = ['functional', 'renameat2']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/rsend:Linux]
tests = ['send_realloc_dnode_size', 'send_encrypted_files']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'rsend']
Add the ZFS Test Suite Add the ZFS Test Suite and test-runner framework from illumos. This is a continuation of the work done by Turbo Fredriksson to port the ZFS Test Suite to Linux. While this work was originally conceived as a stand alone project integrating it directly with the ZoL source tree has several advantages: * Allows the ZFS Test Suite to be packaged in zfs-test package. * Facilitates easy integration with the CI testing. * Users can locally run the ZFS Test Suite to validate ZFS. This testing should ONLY be done on a dedicated test system because the ZFS Test Suite in its current form is destructive. * Allows the ZFS Test Suite to be run directly in the ZoL source tree enabled developers to iterate quickly during development. * Developers can easily add/modify tests in the framework as features are added or functionality is changed. The tests will then always be in sync with the implementation. Full documentation for how to run the ZFS Test Suite is available in the tests/README.md file. Warning: This test suite is designed to be run on a dedicated test system. It will make modifications to the system including, but not limited to, the following. * Adding new users * Adding new groups * Modifying the following /proc files: * /proc/sys/kernel/core_pattern * /proc/sys/kernel/core_uses_pid * Creating directories under / Notes: * Not all of the test cases are expected to pass and by default these test cases are disabled. The failures are primarily due to assumption made for illumos which are invalid under Linux. * When updating these test cases it should be done in as generic a way as possible so the patch can be submitted back upstream. Most existing library functions have been updated to be Linux aware, and the following functions and variables have been added. * Functions: * is_linux - Used to wrap a Linux specific section. * block_device_wait - Waits for block devices to be added to /dev/. * Variables: Linux Illumos * ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk" * ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk" * DEV_DSKDIR "/dev" "/dev/dsk" * DEV_RDSKDIR "/dev" "/dev/rdsk" * NEWFS_DEFAULT_FS "ext2" "ufs" * Many of the disabled test cases fail because 'zfs/zpool destroy' returns EBUSY. This is largely causes by the asynchronous nature of device handling on Linux and is expected, the impacted test cases will need to be updated to handle this. * There are several test cases which have been disabled because they can trigger a deadlock. A primary example of this is to recursively create zpools within zpools. These tests have been disabled until the root issue can be addressed. * Illumos specific utilities such as (mkfile) should be added to the tests/zfs-tests/cmd/ directory. Custom programs required by the test scripts can also be added here. * SELinux should be either is permissive mode or disabled when running the tests. The test cases should be updated to conform to a standard policy. * Redundant test functionality has been removed (zfault.sh). * Existing test scripts (zconfig.sh) should be migrated to use the framework for consistency and ease of testing. * The DISKS environment variable currently only supports loopback devices because of how the ZFS Test Suite expects partitions to be named (p1, p2, etc). Support must be added to generate the correct partition name based on the device location and name. * The ZFS Test Suite is part of the illumos code base at: https://github.com/illumos/illumos-gate/tree/master/usr/src/test Original-patch-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Closes #6 Closes #1534
2015-07-01 22:23:09 +00:00
Linux 5.16 compat: don't use XSTATE_XSAVE to save FPU state Linux 5.16 moved XSTATE_XSAVE and XSTATE_XRESTORE out of our reach, so add our own XSAVE{,OPT,S} code and use it for Linux 5.16. Please note that this differs from previous behavior in that it won't handle exceptions created by XSAVE an XRSTOR. This is sensible for three reasons. - Exceptions during XSAVE and XRSTOR can only occur if the feature is not supported or enabled or the memory operand isn't aligned on a 64 byte boundary. If this happens something else went terribly wrong, and it may be better to stop execution. - Previously we just printed a warning and didn't handle the fault, this is arguable for the above reason. - All other *SAVE instruction also don't handle exceptions, so this at least aligns behavior. Finally add a test to catch such a regression in the future. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Attila Fülöp <attila@fueloep.org> Closes #13042 Closes #13059
2022-02-09 20:50:10 +00:00
[tests/functional/simd:Linux]
pre =
post =
tests = ['simd_supported']
tags = ['functional', 'simd']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/snapshot:Linux]
tests = ['snapshot_015_pos', 'snapshot_016_pos']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'snapshot']
Refresh Linux test suite runfile Associate disabled test cases with existing open issues, update comments to be consistent, disable a few additional test cases. The goal is for all enabled test to pass 100% reliably. The following test cases have been disabled due to infrequent failures during automated testing. Several of these test cases were previous disabled only for the kmemleak builder but have subsequently been observed on other automated builders. - zfs_destroy_001_pos - https://github.com/zfsonlinux/zfs/issues/5635 - zfs_rename_006_pos - https://github.com/zfsonlinux/zfs/issues/5647 - zfs_rename_009_neg - https://github.com/zfsonlinux/zfs/issues/5648 - zpool_clear_001_pos - https://github.com/zfsonlinux/zfs/issues/5634 - zfs_allow_010_pos - https://github.com/zfsonlinux/zfs/issues/5646 - reservation_018_pos - https://github.com/zfsonlinux/zfs/issues/5642 - snapused_004_pos - https://github.com/zfsonlinux/zfs/issues/5513 - rsend_022_pos - https://github.com/zfsonlinux/zfs/issues/5654 - rsend_024_pos - https://github.com/zfsonlinux/zfs/issues/5665 - history_008_pos - https://github.com/zfsonlinux/zfs/issues/5658 - history_006_neg - https://github.com/zfsonlinux/zfs/issues/5657 - history_008_pos - https://github.com/zfsonlinux/zfs/issues/5658 - zfs_inherit_003_pos - https://github.com/zfsonlinux/zfs/issues/5669 Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5649
2017-01-26 20:25:35 +00:00
ZTS: Move tmpfile tests to linux.run O_TMPFILE is not available on FreeBSD. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #9503
2019-10-24 17:49:19 +00:00
[tests/functional/tmpfile:Linux]
Don't fail to apply umask for O_TMPFILE files Apply umask to `mode` which will eventually be applied to inode. This is needed since VFS doesn't apply umask for O_TMPFILE files. (Note that zpl_init_acl() applies `ip->i_mode &= ~current_umask();` only when POSIX ACL is used.) Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com> Closes #8997 Closes #8998
2019-12-13 23:02:23 +00:00
tests = ['tmpfile_001_pos', 'tmpfile_002_pos', 'tmpfile_003_pos',
'tmpfile_stat_mode']
ZTS: Move tmpfile tests to linux.run O_TMPFILE is not available on FreeBSD. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #9503
2019-10-24 17:49:19 +00:00
tags = ['functional', 'tmpfile']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/upgrade:Linux]
tests = ['upgrade_projectquota_001_pos']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'upgrade']
Add support for user/group dnode accounting & quota This patch tracks dnode usage for each user/group in the DMU_USER/GROUPUSED_OBJECT ZAPs. ZAP entries dedicated to dnode accounting have the key prefixed with "obj-" followed by the UID/GID in string format (as done for the block accounting). A new SPA feature has been added for dnode accounting as well as a new ZPL version. The SPA feature must be enabled in the pool before upgrading the zfs filesystem. During the zfs version upgrade, a "quotacheck" will be executed by marking all dnode as dirty. ZoL-bug-id: https://github.com/zfsonlinux/zfs/issues/3500 Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Signed-off-by: Johann Lombardi <johann.lombardi@intel.com>
2016-10-04 18:46:10 +00:00
ZTS: Move user_namespace test to linux.run Namespaces is a Linux feature not available on other platforms. Move the user_namespace test out of common.run to linux.run. Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #9982
2020-02-12 21:06:00 +00:00
[tests/functional/user_namespace:Linux]
Add Linux namespace delegation support This allows ZFS datasets to be delegated to a user/mount namespace Within that namespace, only the delegated datasets are visible Works very similarly to Zones/Jailes on other ZFS OSes As a user: ``` $ unshare -Um $ zfs list no datasets available $ echo $$ 1234 ``` As root: ``` # zfs list NAME ZONED MOUNTPOINT containers off /containers containers/host off /containers/host containers/host/child off /containers/host/child containers/host/child/gchild off /containers/host/child/gchild containers/unpriv on /unpriv containers/unpriv/child on /unpriv/child containers/unpriv/child/gchild on /unpriv/child/gchild # zfs zone /proc/1234/ns/user containers/unpriv ``` Back to the user namespace: ``` $ zfs list NAME USED AVAIL REFER MOUNTPOINT containers 129M 47.8G 24K /containers containers/unpriv 128M 47.8G 24K /unpriv containers/unpriv/child 128M 47.8G 128M /unpriv/child ``` Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Will Andrews <will.andrews@klarasystems.com> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com> Co-authored-by: Allan Jude <allan@klarasystems.com> Co-authored-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com> Sponsored-by: Buddy <https://buddy.works> Closes #12263
2021-02-21 16:19:43 +00:00
tests = ['user_namespace_001', 'user_namespace_002', 'user_namespace_003',
'user_namespace_004']
ZTS: Move user_namespace test to linux.run Namespaces is a Linux feature not available on other platforms. Move the user_namespace test out of common.run to linux.run. Reviewed-by: Igor Kozhukhov <igor@dilos.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <ryan@iXsystems.com> Closes #9982
2020-02-12 21:06:00 +00:00
tags = ['functional', 'user_namespace']
Move platform independent tests to a shared runfile Tests that aren't limited to running on Linux can be moved to a common runfile to be shared with other platforms. The test runner and wrapper script are enhanced to allow specifying multiple runfiles as a comma-separated list. The default runfiles are now "common.run,PLATFORM.run" where PLATFORM is determined at run time. Sections in runfiles that share a path with another runfile can append a colon separator and an identifier to the path in the section name, ie `[tests/functional/atime:Linux]`, to avoid overriding the tests specified by other runfiles. Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Kennedy <john.kennedy@delphix.com> Signed-off-by: Ryan Moeller <ryan@ixsystems.com> Closes #9391
2019-10-09 17:39:26 +00:00
[tests/functional/userquota:Linux]
tests = ['groupspace_001_pos', 'groupspace_002_pos', 'groupspace_003_pos',
'userquota_013_pos', 'userspace_003_pos']
Allow test-runner to filter test groups by tag Enable test-runner to accept a list of tags to identify which test groups the user wishes to run. Also allow test-runner to perform multiple iterations of a test run. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov> Closes #6788
2017-11-03 16:53:32 +00:00
tags = ['functional', 'userquota']
zvol: Support blk-mq for better performance Add support for the kernel's block multiqueue (blk-mq) interface in the zvol block driver. blk-mq creates multiple request queues on different CPUs rather than having a single request queue. This can improve zvol performance with multithreaded reads/writes. This implementation uses the blk-mq interfaces on 4.13 or newer kernels. Building against older kernels will fall back to the older BIO interfaces. Note that you must set the `zvol_use_blk_mq` module param to enable the blk-mq API. It is disabled by default. In addition, this commit lets the zvol blk-mq layer process whole `struct request` IOs at a time, rather than breaking them down into their individual BIOs. This reduces dbuf lock contention and overhead versus the legacy zvol submit_bio() codepath. sequential dd to one zvol, 8k volblocksize, no O_DIRECT: legacy submit_bio() 292MB/s write 453MB/s read this commit 453MB/s write 885MB/s read It also introduces a new `zvol_blk_mq_chunks_per_thread` module parameter. This parameter represents how many volblocksize'd chunks to process per each zvol thread. It can be used to tune your zvols for better read vs write performance (higher values favor write, lower favor read). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #13148 Issue #12483
2022-06-09 14:10:38 +00:00
[tests/functional/zvol/zvol_misc:Linux]
tests = ['zvol_misc_fua']
tags = ['functional', 'zvol', 'zvol_misc']
Support idmapped mount Adds support for idmapped mounts. Supported as of Linux 5.12 this functionality allows user and group IDs to be remapped without changing their state on disk. This can be useful for portable home directories and a variety of container related use cases. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Youzhong Yang <yyang@mathworks.com> Closes #12923 Closes #13671
2022-10-19 18:17:09 +00:00
[tests/functional/idmap_mount:Linux]
tests = ['idmap_mount_001', 'idmap_mount_002', 'idmap_mount_003',
Support idmapped mount in user namespace Linux 5.17 commit torvalds/linux@5dfbfe71e enables "the idmapping infrastructure to support idmapped mounts of filesystems mounted with an idmapping". Update the OpenZFS accordingly to improve the idmapped mount support. This pull request contains the following changes: - xattr setter functions are fixed to take mnt_ns argument. Without this, cp -p would fail for an idmapped mount in a user namespace. - idmap_util is enhanced/fixed for its use in a user ns context. - One test case added to test idmapped mount in a user ns. Reviewed-by: Christian Brauner <christian@brauner.io> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Youzhong Yang <yyang@mathworks.com> Closes #14097
2022-11-08 18:28:56 +00:00
'idmap_mount_004', 'idmap_mount_005']
Support idmapped mount Adds support for idmapped mounts. Supported as of Linux 5.12 this functionality allows user and group IDs to be remapped without changing their state on disk. This can be useful for portable home directories and a variety of container related use cases. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Youzhong Yang <yyang@mathworks.com> Closes #12923 Closes #13671
2022-10-19 18:17:09 +00:00
tags = ['functional', 'idmap_mount']